| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * macsonic.c |
| * |
| * (C) 2005 Finn Thain |
| * |
| * Converted to DMA API, converted to unified driver model, made it work as |
| * a module again, and from the mac68k project, introduced more 32-bit cards |
| * and dhd's support for 16-bit cards. |
| * |
| * (C) 1998 Alan Cox |
| * |
| * Debugging Andreas Ehliar, Michael Schmitz |
| * |
| * Based on code |
| * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de) |
| * |
| * This driver is based on work from Andreas Busse, but most of |
| * the code is rewritten. |
| * |
| * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) |
| * |
| * A driver for the Mac onboard Sonic ethernet chip. |
| * |
| * 98/12/21 MSch: judged from tests on Q800, it's basically working, |
| * but eating up both receive and transmit resources |
| * and duplicating packets. Needs more testing. |
| * |
| * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed. |
| * |
| * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems |
| * on centris. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/gfp.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/in.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <linux/nubus.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/bitrev.h> |
| #include <linux/slab.h> |
| #include <linux/pgtable.h> |
| |
| #include <asm/io.h> |
| #include <asm/hwtest.h> |
| #include <asm/dma.h> |
| #include <asm/macintosh.h> |
| #include <asm/macints.h> |
| #include <asm/mac_via.h> |
| |
| #include "sonic.h" |
| |
| /* These should basically be bus-size and endian independent (since |
| the SONIC is at least smart enough that it uses the same endianness |
| as the host, unlike certain less enlightened Macintosh NICs) */ |
| #define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \ |
| + lp->reg_offset)) |
| #define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \ |
| + lp->reg_offset)) |
| |
| /* For onboard SONIC */ |
| #define ONBOARD_SONIC_REGISTERS 0x50F0A000 |
| #define ONBOARD_SONIC_PROM_BASE 0x50f08000 |
| |
| enum macsonic_type { |
| MACSONIC_DUODOCK, |
| MACSONIC_APPLE, |
| MACSONIC_APPLE16, |
| MACSONIC_DAYNA, |
| MACSONIC_DAYNALINK |
| }; |
| |
| /* For the built-in SONIC in the Duo Dock */ |
| #define DUODOCK_SONIC_REGISTERS 0xe10000 |
| #define DUODOCK_SONIC_PROM_BASE 0xe12000 |
| |
| /* For Apple-style NuBus SONIC */ |
| #define APPLE_SONIC_REGISTERS 0 |
| #define APPLE_SONIC_PROM_BASE 0x40000 |
| |
| /* Daynalink LC SONIC */ |
| #define DAYNALINK_PROM_BASE 0x400000 |
| |
| /* For Dayna-style NuBus SONIC (haven't seen one yet) */ |
| #define DAYNA_SONIC_REGISTERS 0x180000 |
| /* This is what OpenBSD says. However, this is definitely in NuBus |
| ROM space so we should be able to get it by walking the NuBus |
| resource directories */ |
| #define DAYNA_SONIC_MAC_ADDR 0xffe004 |
| |
| #define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr) |
| |
| /* |
| * For reversing the PROM address |
| */ |
| |
| static inline void bit_reverse_addr(unsigned char addr[6]) |
| { |
| int i; |
| |
| for(i = 0; i < 6; i++) |
| addr[i] = bitrev8(addr[i]); |
| } |
| |
| static int macsonic_open(struct net_device* dev) |
| { |
| int retval; |
| |
| retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev); |
| if (retval) { |
| printk(KERN_ERR "%s: unable to get IRQ %d.\n", |
| dev->name, dev->irq); |
| goto err; |
| } |
| /* Under the A/UX interrupt scheme, the onboard SONIC interrupt gets |
| * moved from level 2 to level 3. Unfortunately we still get some |
| * level 2 interrupts so register the handler for both. |
| */ |
| if (dev->irq == IRQ_AUTO_3) { |
| retval = request_irq(IRQ_NUBUS_9, sonic_interrupt, 0, |
| "sonic", dev); |
| if (retval) { |
| printk(KERN_ERR "%s: unable to get IRQ %d.\n", |
| dev->name, IRQ_NUBUS_9); |
| goto err_irq; |
| } |
| } |
| retval = sonic_open(dev); |
| if (retval) |
| goto err_irq_nubus; |
| return 0; |
| |
| err_irq_nubus: |
| if (dev->irq == IRQ_AUTO_3) |
| free_irq(IRQ_NUBUS_9, dev); |
| err_irq: |
| free_irq(dev->irq, dev); |
| err: |
| return retval; |
| } |
| |
| static int macsonic_close(struct net_device* dev) |
| { |
| int err; |
| err = sonic_close(dev); |
| free_irq(dev->irq, dev); |
| if (dev->irq == IRQ_AUTO_3) |
| free_irq(IRQ_NUBUS_9, dev); |
| return err; |
| } |
| |
| static const struct net_device_ops macsonic_netdev_ops = { |
| .ndo_open = macsonic_open, |
| .ndo_stop = macsonic_close, |
| .ndo_start_xmit = sonic_send_packet, |
| .ndo_set_rx_mode = sonic_multicast_list, |
| .ndo_tx_timeout = sonic_tx_timeout, |
| .ndo_get_stats = sonic_get_stats, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = eth_mac_addr, |
| }; |
| |
| static int macsonic_init(struct net_device *dev) |
| { |
| struct sonic_local* lp = netdev_priv(dev); |
| int err = sonic_alloc_descriptors(dev); |
| |
| if (err) |
| return err; |
| |
| dev->netdev_ops = &macsonic_netdev_ops; |
| dev->watchdog_timeo = TX_TIMEOUT; |
| |
| /* |
| * clear tally counter |
| */ |
| SONIC_WRITE(SONIC_CRCT, 0xffff); |
| SONIC_WRITE(SONIC_FAET, 0xffff); |
| SONIC_WRITE(SONIC_MPT, 0xffff); |
| |
| return 0; |
| } |
| |
| #define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \ |
| memcmp(mac, "\x00\xA0\x40", 3) && \ |
| memcmp(mac, "\x00\x80\x19", 3) && \ |
| memcmp(mac, "\x00\x05\x02", 3)) |
| |
| static void mac_onboard_sonic_ethernet_addr(struct net_device *dev) |
| { |
| struct sonic_local *lp = netdev_priv(dev); |
| const int prom_addr = ONBOARD_SONIC_PROM_BASE; |
| unsigned short val; |
| |
| /* |
| * On NuBus boards we can sometimes look in the ROM resources. |
| * No such luck for comm-slot/onboard. |
| * On the PowerBook 520, the PROM base address is a mystery. |
| */ |
| if (hwreg_present((void *)prom_addr)) { |
| int i; |
| |
| for (i = 0; i < 6; i++) |
| dev->dev_addr[i] = SONIC_READ_PROM(i); |
| if (!INVALID_MAC(dev->dev_addr)) |
| return; |
| |
| /* |
| * Most of the time, the address is bit-reversed. The NetBSD |
| * source has a rather long and detailed historical account of |
| * why this is so. |
| */ |
| bit_reverse_addr(dev->dev_addr); |
| if (!INVALID_MAC(dev->dev_addr)) |
| return; |
| |
| /* |
| * If we still have what seems to be a bogus address, we'll |
| * look in the CAM. The top entry should be ours. |
| */ |
| printk(KERN_WARNING "macsonic: MAC address in PROM seems " |
| "to be invalid, trying CAM\n"); |
| } else { |
| printk(KERN_WARNING "macsonic: cannot read MAC address from " |
| "PROM, trying CAM\n"); |
| } |
| |
| /* This only works if MacOS has already initialized the card. */ |
| |
| SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); |
| SONIC_WRITE(SONIC_CEP, 15); |
| |
| val = SONIC_READ(SONIC_CAP2); |
| dev->dev_addr[5] = val >> 8; |
| dev->dev_addr[4] = val & 0xff; |
| val = SONIC_READ(SONIC_CAP1); |
| dev->dev_addr[3] = val >> 8; |
| dev->dev_addr[2] = val & 0xff; |
| val = SONIC_READ(SONIC_CAP0); |
| dev->dev_addr[1] = val >> 8; |
| dev->dev_addr[0] = val & 0xff; |
| |
| if (!INVALID_MAC(dev->dev_addr)) |
| return; |
| |
| /* Still nonsense ... messed up someplace! */ |
| |
| printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " |
| "seems invalid, will use a random MAC\n"); |
| eth_hw_addr_random(dev); |
| } |
| |
| static int mac_onboard_sonic_probe(struct net_device *dev) |
| { |
| struct sonic_local* lp = netdev_priv(dev); |
| int sr; |
| bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM; |
| |
| /* Bogus probing, on the models which may or may not have |
| Ethernet (BTW, the Ethernet *is* always at the same |
| address, and nothing else lives there, at least if Apple's |
| documentation is to be believed) */ |
| if (commslot || macintosh_config->ident == MAC_MODEL_C610) { |
| int card_present; |
| |
| card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS); |
| if (!card_present) { |
| pr_info("Onboard/comm-slot SONIC not found\n"); |
| return -ENODEV; |
| } |
| } |
| |
| /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset |
| * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ |
| dev->base_addr = ONBOARD_SONIC_REGISTERS; |
| if (via_alt_mapping) |
| dev->irq = IRQ_AUTO_3; |
| else |
| dev->irq = IRQ_NUBUS_9; |
| |
| /* The PowerBook's SONIC is 16 bit always. */ |
| if (macintosh_config->ident == MAC_MODEL_PB520) { |
| lp->reg_offset = 0; |
| lp->dma_bitmode = SONIC_BITMODE16; |
| } else if (commslot) { |
| /* Some of the comm-slot cards are 16 bit. But some |
| of them are not. The 32-bit cards use offset 2 and |
| have known revisions, we try reading the revision |
| register at offset 2, if we don't get a known revision |
| we assume 16 bit at offset 0. */ |
| lp->reg_offset = 2; |
| lp->dma_bitmode = SONIC_BITMODE16; |
| |
| sr = SONIC_READ(SONIC_SR); |
| if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101) |
| /* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */ |
| lp->dma_bitmode = SONIC_BITMODE32; |
| else { |
| lp->dma_bitmode = SONIC_BITMODE16; |
| lp->reg_offset = 0; |
| } |
| } else { |
| /* All onboard cards are at offset 2 with 32 bit DMA. */ |
| lp->reg_offset = 2; |
| lp->dma_bitmode = SONIC_BITMODE32; |
| } |
| |
| pr_info("Onboard/comm-slot SONIC, revision 0x%04x, %d bit DMA, register offset %d\n", |
| SONIC_READ(SONIC_SR), lp->dma_bitmode ? 32 : 16, |
| lp->reg_offset); |
| |
| /* This is sometimes useful to find out how MacOS configured the card */ |
| pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__, |
| SONIC_READ(SONIC_DCR) & 0xffff, |
| SONIC_READ(SONIC_DCR2) & 0xffff); |
| |
| /* Software reset, then initialize control registers. */ |
| SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); |
| |
| SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS | |
| SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | |
| (lp->dma_bitmode ? SONIC_DCR_DW : 0)); |
| |
| /* This *must* be written back to in order to restore the |
| * extended programmable output bits, as it may not have been |
| * initialised since the hardware reset. */ |
| SONIC_WRITE(SONIC_DCR2, 0); |
| |
| /* Clear *and* disable interrupts to be on the safe side */ |
| SONIC_WRITE(SONIC_IMR, 0); |
| SONIC_WRITE(SONIC_ISR, 0x7fff); |
| |
| /* Now look for the MAC address. */ |
| mac_onboard_sonic_ethernet_addr(dev); |
| |
| pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", |
| dev->base_addr, dev->dev_addr, dev->irq); |
| |
| /* Shared init code */ |
| return macsonic_init(dev); |
| } |
| |
| static int mac_sonic_nubus_ethernet_addr(struct net_device *dev, |
| unsigned long prom_addr, int id) |
| { |
| int i; |
| for(i = 0; i < 6; i++) |
| dev->dev_addr[i] = SONIC_READ_PROM(i); |
| |
| /* Some of the addresses are bit-reversed */ |
| if (id != MACSONIC_DAYNA) |
| bit_reverse_addr(dev->dev_addr); |
| |
| return 0; |
| } |
| |
| static int macsonic_ident(struct nubus_rsrc *fres) |
| { |
| if (fres->dr_hw == NUBUS_DRHW_ASANTE_LC && |
| fres->dr_sw == NUBUS_DRSW_SONIC_LC) |
| return MACSONIC_DAYNALINK; |
| if (fres->dr_hw == NUBUS_DRHW_SONIC && |
| fres->dr_sw == NUBUS_DRSW_APPLE) { |
| /* There has to be a better way to do this... */ |
| if (strstr(fres->board->name, "DuoDock")) |
| return MACSONIC_DUODOCK; |
| else |
| return MACSONIC_APPLE; |
| } |
| |
| if (fres->dr_hw == NUBUS_DRHW_SMC9194 && |
| fres->dr_sw == NUBUS_DRSW_DAYNA) |
| return MACSONIC_DAYNA; |
| |
| if (fres->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC && |
| fres->dr_sw == 0) { /* huh? */ |
| return MACSONIC_APPLE16; |
| } |
| return -1; |
| } |
| |
| static int mac_sonic_nubus_probe_board(struct nubus_board *board, int id, |
| struct net_device *dev) |
| { |
| struct sonic_local* lp = netdev_priv(dev); |
| unsigned long base_addr, prom_addr; |
| u16 sonic_dcr; |
| int reg_offset, dma_bitmode; |
| |
| switch (id) { |
| case MACSONIC_DUODOCK: |
| base_addr = board->slot_addr + DUODOCK_SONIC_REGISTERS; |
| prom_addr = board->slot_addr + DUODOCK_SONIC_PROM_BASE; |
| sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 | |
| SONIC_DCR_TFT0; |
| reg_offset = 2; |
| dma_bitmode = SONIC_BITMODE32; |
| break; |
| case MACSONIC_APPLE: |
| base_addr = board->slot_addr + APPLE_SONIC_REGISTERS; |
| prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE; |
| sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0; |
| reg_offset = 0; |
| dma_bitmode = SONIC_BITMODE32; |
| break; |
| case MACSONIC_APPLE16: |
| base_addr = board->slot_addr + APPLE_SONIC_REGISTERS; |
| prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE; |
| sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | |
| SONIC_DCR_PO1 | SONIC_DCR_BMS; |
| reg_offset = 0; |
| dma_bitmode = SONIC_BITMODE16; |
| break; |
| case MACSONIC_DAYNALINK: |
| base_addr = board->slot_addr + APPLE_SONIC_REGISTERS; |
| prom_addr = board->slot_addr + DAYNALINK_PROM_BASE; |
| sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | |
| SONIC_DCR_PO1 | SONIC_DCR_BMS; |
| reg_offset = 0; |
| dma_bitmode = SONIC_BITMODE16; |
| break; |
| case MACSONIC_DAYNA: |
| base_addr = board->slot_addr + DAYNA_SONIC_REGISTERS; |
| prom_addr = board->slot_addr + DAYNA_SONIC_MAC_ADDR; |
| sonic_dcr = SONIC_DCR_BMS | |
| SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1; |
| reg_offset = 0; |
| dma_bitmode = SONIC_BITMODE16; |
| break; |
| default: |
| printk(KERN_ERR "macsonic: WTF, id is %d\n", id); |
| return -ENODEV; |
| } |
| |
| /* Danger! My arms are flailing wildly! You *must* set lp->reg_offset |
| * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */ |
| dev->base_addr = base_addr; |
| lp->reg_offset = reg_offset; |
| lp->dma_bitmode = dma_bitmode; |
| dev->irq = SLOT2IRQ(board->slot); |
| |
| dev_info(&board->dev, "%s, revision 0x%04x, %d bit DMA, register offset %d\n", |
| board->name, SONIC_READ(SONIC_SR), |
| lp->dma_bitmode ? 32 : 16, lp->reg_offset); |
| |
| /* This is sometimes useful to find out how MacOS configured the card */ |
| dev_dbg(&board->dev, "%s: DCR=0x%04x, DCR2=0x%04x\n", __func__, |
| SONIC_READ(SONIC_DCR) & 0xffff, |
| SONIC_READ(SONIC_DCR2) & 0xffff); |
| |
| /* Software reset, then initialize control registers. */ |
| SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); |
| SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0)); |
| /* This *must* be written back to in order to restore the |
| * extended programmable output bits, since it may not have been |
| * initialised since the hardware reset. */ |
| SONIC_WRITE(SONIC_DCR2, 0); |
| |
| /* Clear *and* disable interrupts to be on the safe side */ |
| SONIC_WRITE(SONIC_IMR, 0); |
| SONIC_WRITE(SONIC_ISR, 0x7fff); |
| |
| /* Now look for the MAC address. */ |
| if (mac_sonic_nubus_ethernet_addr(dev, prom_addr, id) != 0) |
| return -ENODEV; |
| |
| dev_info(&board->dev, "SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", |
| dev->base_addr, dev->dev_addr, dev->irq); |
| |
| /* Shared init code */ |
| return macsonic_init(dev); |
| } |
| |
| static int mac_sonic_platform_probe(struct platform_device *pdev) |
| { |
| struct net_device *dev; |
| struct sonic_local *lp; |
| int err; |
| |
| dev = alloc_etherdev(sizeof(struct sonic_local)); |
| if (!dev) |
| return -ENOMEM; |
| |
| lp = netdev_priv(dev); |
| lp->device = &pdev->dev; |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| platform_set_drvdata(pdev, dev); |
| |
| err = mac_onboard_sonic_probe(dev); |
| if (err) |
| goto out; |
| |
| sonic_msg_init(dev); |
| |
| err = register_netdev(dev); |
| if (err) |
| goto undo_probe; |
| |
| return 0; |
| |
| undo_probe: |
| dma_free_coherent(lp->device, |
| SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), |
| lp->descriptors, lp->descriptors_laddr); |
| out: |
| free_netdev(dev); |
| |
| return err; |
| } |
| |
| MODULE_DESCRIPTION("Macintosh SONIC ethernet driver"); |
| MODULE_ALIAS("platform:macsonic"); |
| |
| #include "sonic.c" |
| |
| static int mac_sonic_platform_remove(struct platform_device *pdev) |
| { |
| struct net_device *dev = platform_get_drvdata(pdev); |
| struct sonic_local* lp = netdev_priv(dev); |
| |
| unregister_netdev(dev); |
| dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), |
| lp->descriptors, lp->descriptors_laddr); |
| free_netdev(dev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver mac_sonic_platform_driver = { |
| .probe = mac_sonic_platform_probe, |
| .remove = mac_sonic_platform_remove, |
| .driver = { |
| .name = "macsonic", |
| }, |
| }; |
| |
| static int mac_sonic_nubus_probe(struct nubus_board *board) |
| { |
| struct net_device *ndev; |
| struct sonic_local *lp; |
| struct nubus_rsrc *fres; |
| int id = -1; |
| int err; |
| |
| /* The platform driver will handle a PDS or Comm Slot card (even if |
| * it has a pseudoslot declaration ROM). |
| */ |
| if (macintosh_config->expansion_type == MAC_EXP_PDS_COMM) |
| return -ENODEV; |
| |
| for_each_board_func_rsrc(board, fres) { |
| if (fres->category != NUBUS_CAT_NETWORK || |
| fres->type != NUBUS_TYPE_ETHERNET) |
| continue; |
| |
| id = macsonic_ident(fres); |
| if (id != -1) |
| break; |
| } |
| if (!fres) |
| return -ENODEV; |
| |
| ndev = alloc_etherdev(sizeof(struct sonic_local)); |
| if (!ndev) |
| return -ENOMEM; |
| |
| lp = netdev_priv(ndev); |
| lp->device = &board->dev; |
| SET_NETDEV_DEV(ndev, &board->dev); |
| |
| err = mac_sonic_nubus_probe_board(board, id, ndev); |
| if (err) |
| goto out; |
| |
| sonic_msg_init(ndev); |
| |
| err = register_netdev(ndev); |
| if (err) |
| goto undo_probe; |
| |
| nubus_set_drvdata(board, ndev); |
| |
| return 0; |
| |
| undo_probe: |
| dma_free_coherent(lp->device, |
| SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), |
| lp->descriptors, lp->descriptors_laddr); |
| out: |
| free_netdev(ndev); |
| return err; |
| } |
| |
| static void mac_sonic_nubus_remove(struct nubus_board *board) |
| { |
| struct net_device *ndev = nubus_get_drvdata(board); |
| struct sonic_local *lp = netdev_priv(ndev); |
| |
| unregister_netdev(ndev); |
| dma_free_coherent(lp->device, |
| SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), |
| lp->descriptors, lp->descriptors_laddr); |
| free_netdev(ndev); |
| } |
| |
| static struct nubus_driver mac_sonic_nubus_driver = { |
| .probe = mac_sonic_nubus_probe, |
| .remove = mac_sonic_nubus_remove, |
| .driver = { |
| .name = "macsonic-nubus", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int perr, nerr; |
| |
| static int __init mac_sonic_init(void) |
| { |
| perr = platform_driver_register(&mac_sonic_platform_driver); |
| nerr = nubus_driver_register(&mac_sonic_nubus_driver); |
| return 0; |
| } |
| module_init(mac_sonic_init); |
| |
| static void __exit mac_sonic_exit(void) |
| { |
| if (!perr) |
| platform_driver_unregister(&mac_sonic_platform_driver); |
| if (!nerr) |
| nubus_driver_unregister(&mac_sonic_nubus_driver); |
| } |
| module_exit(mac_sonic_exit); |