| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Loongson PCI Host Controller Driver |
| * |
| * Copyright (C) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com> |
| */ |
| |
| #include <linux/of_device.h> |
| #include <linux/of_pci.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| |
| #include "../pci.h" |
| |
| /* Device IDs */ |
| #define DEV_PCIE_PORT_0 0x7a09 |
| #define DEV_PCIE_PORT_1 0x7a19 |
| #define DEV_PCIE_PORT_2 0x7a29 |
| |
| #define DEV_LS2K_APB 0x7a02 |
| #define DEV_LS7A_CONF 0x7a10 |
| #define DEV_LS7A_LPC 0x7a0c |
| |
| #define FLAG_CFG0 BIT(0) |
| #define FLAG_CFG1 BIT(1) |
| #define FLAG_DEV_FIX BIT(2) |
| |
| struct loongson_pci { |
| void __iomem *cfg0_base; |
| void __iomem *cfg1_base; |
| struct platform_device *pdev; |
| u32 flags; |
| }; |
| |
| /* Fixup wrong class code in PCIe bridges */ |
| static void bridge_class_quirk(struct pci_dev *dev) |
| { |
| dev->class = PCI_CLASS_BRIDGE_PCI << 8; |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_PCIE_PORT_0, bridge_class_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_PCIE_PORT_1, bridge_class_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_PCIE_PORT_2, bridge_class_quirk); |
| |
| static void system_bus_quirk(struct pci_dev *pdev) |
| { |
| /* |
| * The address space consumed by these devices is outside the |
| * resources of the host bridge. |
| */ |
| pdev->mmio_always_on = 1; |
| pdev->non_compliant_bars = 1; |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS2K_APB, system_bus_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_CONF, system_bus_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_LPC, system_bus_quirk); |
| |
| static void loongson_mrrs_quirk(struct pci_dev *dev) |
| { |
| struct pci_bus *bus = dev->bus; |
| struct pci_dev *bridge; |
| static const struct pci_device_id bridge_devids[] = { |
| { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, |
| { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, |
| { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, |
| { 0, }, |
| }; |
| |
| /* look for the matching bridge */ |
| while (!pci_is_root_bus(bus)) { |
| bridge = bus->self; |
| bus = bus->parent; |
| /* |
| * Some Loongson PCIe ports have a h/w limitation of |
| * 256 bytes maximum read request size. They can't handle |
| * anything larger than this. So force this limit on |
| * any devices attached under these ports. |
| */ |
| if (pci_match_id(bridge_devids, bridge)) { |
| if (pcie_get_readrq(dev) > 256) { |
| pci_info(dev, "limiting MRRS to 256\n"); |
| pcie_set_readrq(dev, 256); |
| } |
| break; |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); |
| |
| static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, |
| unsigned int devfn, int where) |
| { |
| unsigned long addroff = 0x0; |
| |
| if (bus != 0) |
| addroff |= BIT(28); /* Type 1 Access */ |
| addroff |= (where & 0xff) | ((where & 0xf00) << 16); |
| addroff |= (bus << 16) | (devfn << 8); |
| return priv->cfg1_base + addroff; |
| } |
| |
| static void __iomem *cfg0_map(struct loongson_pci *priv, int bus, |
| unsigned int devfn, int where) |
| { |
| unsigned long addroff = 0x0; |
| |
| if (bus != 0) |
| addroff |= BIT(24); /* Type 1 Access */ |
| addroff |= (bus << 16) | (devfn << 8) | where; |
| return priv->cfg0_base + addroff; |
| } |
| |
| static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devfn, |
| int where) |
| { |
| unsigned char busnum = bus->number; |
| struct pci_host_bridge *bridge = pci_find_host_bridge(bus); |
| struct loongson_pci *priv = pci_host_bridge_priv(bridge); |
| |
| /* |
| * Do not read more than one device on the bus other than |
| * the host bus. For our hardware the root bus is always bus 0. |
| */ |
| if (priv->flags & FLAG_DEV_FIX && busnum != 0 && |
| PCI_SLOT(devfn) > 0) |
| return NULL; |
| |
| /* CFG0 can only access standard space */ |
| if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base) |
| return cfg0_map(priv, busnum, devfn, where); |
| |
| /* CFG1 can access extended space */ |
| if (where < PCI_CFG_SPACE_EXP_SIZE && priv->cfg1_base) |
| return cfg1_map(priv, busnum, devfn, where); |
| |
| return NULL; |
| } |
| |
| static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| int irq; |
| u8 val; |
| |
| irq = of_irq_parse_and_map_pci(dev, slot, pin); |
| if (irq > 0) |
| return irq; |
| |
| /* Care i8259 legacy systems */ |
| pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val); |
| /* i8259 only have 15 IRQs */ |
| if (val > 15) |
| return 0; |
| |
| return val; |
| } |
| |
| /* H/w only accept 32-bit PCI operations */ |
| static struct pci_ops loongson_pci_ops = { |
| .map_bus = pci_loongson_map_bus, |
| .read = pci_generic_config_read32, |
| .write = pci_generic_config_write32, |
| }; |
| |
| static const struct of_device_id loongson_pci_of_match[] = { |
| { .compatible = "loongson,ls2k-pci", |
| .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, |
| { .compatible = "loongson,ls7a-pci", |
| .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, |
| { .compatible = "loongson,rs780e-pci", |
| .data = (void *)(FLAG_CFG0), }, |
| {} |
| }; |
| |
| static int loongson_pci_probe(struct platform_device *pdev) |
| { |
| struct loongson_pci *priv; |
| struct device *dev = &pdev->dev; |
| struct device_node *node = dev->of_node; |
| struct pci_host_bridge *bridge; |
| struct resource *regs; |
| |
| if (!node) |
| return -ENODEV; |
| |
| bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv)); |
| if (!bridge) |
| return -ENODEV; |
| |
| priv = pci_host_bridge_priv(bridge); |
| priv->pdev = pdev; |
| priv->flags = (unsigned long)of_device_get_match_data(dev); |
| |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!regs) { |
| dev_err(dev, "missing mem resources for cfg0\n"); |
| return -EINVAL; |
| } |
| |
| priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs); |
| if (IS_ERR(priv->cfg0_base)) |
| return PTR_ERR(priv->cfg0_base); |
| |
| /* CFG1 is optional */ |
| if (priv->flags & FLAG_CFG1) { |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!regs) |
| dev_info(dev, "missing mem resource for cfg1\n"); |
| else { |
| priv->cfg1_base = devm_pci_remap_cfg_resource(dev, regs); |
| if (IS_ERR(priv->cfg1_base)) |
| priv->cfg1_base = NULL; |
| } |
| } |
| |
| bridge->sysdata = priv; |
| bridge->ops = &loongson_pci_ops; |
| bridge->map_irq = loongson_map_irq; |
| |
| return pci_host_probe(bridge); |
| } |
| |
| static struct platform_driver loongson_pci_driver = { |
| .driver = { |
| .name = "loongson-pci", |
| .of_match_table = loongson_pci_of_match, |
| }, |
| .probe = loongson_pci_probe, |
| }; |
| builtin_platform_driver(loongson_pci_driver); |