| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Watchdog timer for PowerPC Book-E systems |
| * |
| * Author: Matthew McClintock |
| * Maintainer: Kumar Gala <galak@kernel.crashing.org> |
| * |
| * Copyright 2005, 2008, 2010-2011 Freescale Semiconductor Inc. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/smp.h> |
| #include <linux/watchdog.h> |
| |
| #include <asm/reg_booke.h> |
| #include <asm/time.h> |
| #include <asm/div64.h> |
| |
| /* If the kernel parameter wdt=1, the watchdog will be enabled at boot. |
| * Also, the wdt_period sets the watchdog timer period timeout. |
| * For E500 cpus the wdt_period sets which bit changing from 0->1 will |
| * trigger a watchdog timeout. This watchdog timeout will occur 3 times, the |
| * first time nothing will happen, the second time a watchdog exception will |
| * occur, and the final time the board will reset. |
| */ |
| |
| |
| #ifdef CONFIG_PPC_FSL_BOOK3E |
| #define WDTP(x) ((((x)&0x3)<<30)|(((x)&0x3c)<<15)) |
| #define WDTP_MASK (WDTP(0x3f)) |
| #else |
| #define WDTP(x) (TCR_WP(x)) |
| #define WDTP_MASK (TCR_WP_MASK) |
| #endif |
| |
| static bool booke_wdt_enabled; |
| module_param(booke_wdt_enabled, bool, 0); |
| static int booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT; |
| module_param(booke_wdt_period, int, 0); |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| #ifdef CONFIG_PPC_FSL_BOOK3E |
| |
| /* For the specified period, determine the number of seconds |
| * corresponding to the reset time. There will be a watchdog |
| * exception at approximately 3/5 of this time. |
| * |
| * The formula to calculate this is given by: |
| * 2.5 * (2^(63-period+1)) / timebase_freq |
| * |
| * In order to simplify things, we assume that period is |
| * at least 1. This will still result in a very long timeout. |
| */ |
| static unsigned long long period_to_sec(unsigned int period) |
| { |
| unsigned long long tmp = 1ULL << (64 - period); |
| unsigned long tmp2 = ppc_tb_freq; |
| |
| /* tmp may be a very large number and we don't want to overflow, |
| * so divide the timebase freq instead of multiplying tmp |
| */ |
| tmp2 = tmp2 / 5 * 2; |
| |
| do_div(tmp, tmp2); |
| return tmp; |
| } |
| |
| /* |
| * This procedure will find the highest period which will give a timeout |
| * greater than the one required. e.g. for a bus speed of 66666666 and |
| * and a parameter of 2 secs, then this procedure will return a value of 38. |
| */ |
| static unsigned int sec_to_period(unsigned int secs) |
| { |
| unsigned int period; |
| for (period = 63; period > 0; period--) { |
| if (period_to_sec(period) >= secs) |
| return period; |
| } |
| return 0; |
| } |
| |
| #define MAX_WDT_TIMEOUT period_to_sec(1) |
| |
| #else /* CONFIG_PPC_FSL_BOOK3E */ |
| |
| static unsigned long long period_to_sec(unsigned int period) |
| { |
| return period; |
| } |
| |
| static unsigned int sec_to_period(unsigned int secs) |
| { |
| return secs; |
| } |
| |
| #define MAX_WDT_TIMEOUT 3 /* from Kconfig */ |
| |
| #endif /* !CONFIG_PPC_FSL_BOOK3E */ |
| |
| static void __booke_wdt_set(void *data) |
| { |
| u32 val; |
| struct watchdog_device *wdog = data; |
| |
| val = mfspr(SPRN_TCR); |
| val &= ~WDTP_MASK; |
| val |= WDTP(sec_to_period(wdog->timeout)); |
| |
| mtspr(SPRN_TCR, val); |
| } |
| |
| static void booke_wdt_set(void *data) |
| { |
| on_each_cpu(__booke_wdt_set, data, 0); |
| } |
| |
| static void __booke_wdt_ping(void *data) |
| { |
| mtspr(SPRN_TSR, TSR_ENW|TSR_WIS); |
| } |
| |
| static int booke_wdt_ping(struct watchdog_device *wdog) |
| { |
| on_each_cpu(__booke_wdt_ping, NULL, 0); |
| |
| return 0; |
| } |
| |
| static void __booke_wdt_enable(void *data) |
| { |
| u32 val; |
| struct watchdog_device *wdog = data; |
| |
| /* clear status before enabling watchdog */ |
| __booke_wdt_ping(NULL); |
| val = mfspr(SPRN_TCR); |
| val &= ~WDTP_MASK; |
| val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(sec_to_period(wdog->timeout))); |
| |
| mtspr(SPRN_TCR, val); |
| } |
| |
| /** |
| * __booke_wdt_disable - disable the watchdog on the given CPU |
| * |
| * This function is called on each CPU. It disables the watchdog on that CPU. |
| * |
| * TCR[WRC] cannot be changed once it has been set to non-zero, but we can |
| * effectively disable the watchdog by setting its period to the maximum value. |
| */ |
| static void __booke_wdt_disable(void *data) |
| { |
| u32 val; |
| |
| val = mfspr(SPRN_TCR); |
| val &= ~(TCR_WIE | WDTP_MASK); |
| mtspr(SPRN_TCR, val); |
| |
| /* clear status to make sure nothing is pending */ |
| __booke_wdt_ping(NULL); |
| |
| } |
| |
| static int booke_wdt_start(struct watchdog_device *wdog) |
| { |
| on_each_cpu(__booke_wdt_enable, wdog, 0); |
| pr_debug("watchdog enabled (timeout = %u sec)\n", wdog->timeout); |
| |
| return 0; |
| } |
| |
| static int booke_wdt_stop(struct watchdog_device *wdog) |
| { |
| on_each_cpu(__booke_wdt_disable, NULL, 0); |
| pr_debug("watchdog disabled\n"); |
| |
| return 0; |
| } |
| |
| static int booke_wdt_set_timeout(struct watchdog_device *wdt_dev, |
| unsigned int timeout) |
| { |
| wdt_dev->timeout = timeout; |
| booke_wdt_set(wdt_dev); |
| |
| return 0; |
| } |
| |
| static struct watchdog_info booke_wdt_info __ro_after_init = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, |
| .identity = "PowerPC Book-E Watchdog", |
| }; |
| |
| static const struct watchdog_ops booke_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = booke_wdt_start, |
| .stop = booke_wdt_stop, |
| .ping = booke_wdt_ping, |
| .set_timeout = booke_wdt_set_timeout, |
| }; |
| |
| static struct watchdog_device booke_wdt_dev = { |
| .info = &booke_wdt_info, |
| .ops = &booke_wdt_ops, |
| .min_timeout = 1, |
| }; |
| |
| static void __exit booke_wdt_exit(void) |
| { |
| watchdog_unregister_device(&booke_wdt_dev); |
| } |
| |
| static int __init booke_wdt_init(void) |
| { |
| int ret = 0; |
| |
| pr_info("powerpc book-e watchdog driver loaded\n"); |
| booke_wdt_info.firmware_version = cur_cpu_spec->pvr_value; |
| booke_wdt_set_timeout(&booke_wdt_dev, |
| period_to_sec(booke_wdt_period)); |
| watchdog_set_nowayout(&booke_wdt_dev, nowayout); |
| booke_wdt_dev.max_timeout = MAX_WDT_TIMEOUT; |
| if (booke_wdt_enabled) |
| booke_wdt_start(&booke_wdt_dev); |
| |
| ret = watchdog_register_device(&booke_wdt_dev); |
| |
| return ret; |
| } |
| |
| module_init(booke_wdt_init); |
| module_exit(booke_wdt_exit); |
| |
| MODULE_ALIAS("booke_wdt"); |
| MODULE_DESCRIPTION("PowerPC Book-E watchdog driver"); |
| MODULE_LICENSE("GPL"); |