blob: 3410bcbc9dbe04030b6952ce537f1306a2186d18 [file] [log] [blame]
choice
prompt "Machine Type"
depends on EMBEDDED6xx
config KATANA
bool "Artesyn-Katana"
help
Select KATANA if configuring an Artesyn KATANA 750i or 3750
cPCI board.
config WILLOW
bool "Cogent-Willow"
config CPCI690
bool "Force-CPCI690"
help
Select CPCI690 if configuring a Force CPCI690 cPCI board.
config POWERPMC250
bool "Force-PowerPMC250"
config CHESTNUT
bool "IBM 750FX Eval board or 750GX Eval board"
help
Select CHESTNUT if configuring an IBM 750FX Eval Board or a
IBM 750GX Eval board.
config SPRUCE
bool "IBM-Spruce"
select PPC_INDIRECT_PCI
config HDPU
bool "Sky-HDPU"
help
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
depends on HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
config EV64260
bool "Marvell-EV64260BP"
help
Select EV64260 if configuring a Marvell (formerly Galileo)
EV64260BP Evaluation platform.
config LOPEC
bool "Motorola-LoPEC"
select PPC_I8259
config MVME5100
bool "Motorola-MVME5100"
select PPC_INDIRECT_PCI
config PPLUS
bool "Motorola-PowerPlus"
select PPC_I8259
select PPC_INDIRECT_PCI
config PRPMC750
bool "Motorola-PrPMC750"
select PPC_INDIRECT_PCI
config PRPMC800
bool "Motorola-PrPMC800"
select PPC_INDIRECT_PCI
config SANDPOINT
bool "Motorola-Sandpoint"
select PPC_I8259
help
Select SANDPOINT if configuring for a Motorola Sandpoint X3
(any flavor).
config LINKSTATION
bool "Linkstation / Kurobox(HG) from Buffalo"
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
select DEFAULT_UIMAGE
help
Select LINKSTATION if configuring for one of PPC- (MPC8241)
based NAS systems from Buffalo Technology. So far only
KuroboxHG has been tested. In the future classical Kurobox,
Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
Terastation systems should be supported too.
config MPC7448HPC2
bool "Freescale MPC7448HPC2(Taiga)"
select TSI108_BRIDGE
select DEFAULT_UIMAGE
select PPC_UDBG_16550
select MPIC
select MPIC_WEIRD
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
config RADSTONE_PPC7D
bool "Radstone Technology PPC7D board"
select PPC_I8259
config PAL4
bool "SBS-Palomar4"
config EST8260
bool "EST8260"
---help---
The EST8260 is a single-board computer manufactured by Wind River
Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
the MPC8260. Wind River Systems has a website at
<http://www.windriver.com/>, but the EST8260 cannot be found on it
and has probably been discontinued or rebadged.
config SBC82xx
bool "SBC82xx"
---help---
SBC PowerQUICC II, single-board computer with MPC82xx CPU
Manufacturer: Wind River Systems, Inc.
Date of Release: May 2003
End of Life: -
URL: <http://www.windriver.com/>
config SBS8260
bool "SBS8260"
config RPX8260
bool "RPXSUPER"
config TQM8260
bool "TQM8260"
---help---
MPC8260 based module, little larger than credit card,
up to 128 MB global + 64 MB local RAM, 32 MB Flash,
32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
2 x serial ports, ...
Manufacturer: TQ Components, www.tq-group.de
Date of Release: June 2001
End of Life: not yet :-)
URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
config ADS8272
bool "ADS8272"
config PQ2FADS
bool "Freescale-PQ2FADS"
help
Select PQ2FADS if you wish to configure for a Freescale
PQ2FADS board (-VR or -ZU).
config EV64360
bool "Marvell-EV64360BP"
help
Select EV64360 if configuring a Marvell EV64360BP Evaluation
platform.
endchoice
config PQ2ADS
bool
depends on ADS8272
default y
config TQM8xxL
bool
depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
default y
config 8260
bool "CPM2 Support" if WILLOW
depends on 6xx
default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
help
The MPC8260 is a typical embedded CPU made by Motorola. Selecting
this option means that you wish to build a kernel for a machine with
an 8260 class CPU.
config 8272
bool
depends on 6xx
default y if ADS8272
select 8260
help
The MPC8272 CPM has a different internal dpram setup than other CPM2
devices
config CPM2
bool
depends on 8260 || MPC8560 || MPC8555
default y
help
The CPM2 (Communications Processor Module) is a coprocessor on
embedded CPUs made by Motorola. Selecting this option means that
you wish to build a kernel for a machine with a CPM2 coprocessor
on it (826x, 827x, 8560).
config PPC_GEN550
bool
depends on SANDPOINT || SPRUCE || PPLUS || \
PRPMC750 || PRPMC800 || LOPEC || \
(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
83xx || LINKSTATION
default y
config FORCE
bool
depends on 6xx && POWERPMC250
default y
config GT64260
bool
depends on EV64260 || CPCI690
default y
config MV64360 # Really MV64360 & MV64460
bool
depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
default y
config MV64X60
bool
depends on (GT64260 || MV64360)
select PPC_INDIRECT_PCI
default y
config TSI108_BRIDGE
bool
depends on MPC7448HPC2
default y
menu "Set bridge options"
depends on MV64X60
config NOT_COHERENT_CACHE
bool "Turn off Cache Coherency"
default n
help
Some 64x60 bridges lock up when trying to enforce cache coherency.
When this option is selected, cache coherency will be turned off.
Note that this can cause other problems (e.g., stale data being
speculatively loaded via a cached mapping). Use at your own risk.
config MV64X60_BASE
hex "Set bridge base used by firmware"
default "0xf1000000"
help
A firmware can leave the base address of the bridge's registers at
a non-standard location. If so, set this value to reflect the
address of that non-standard location.
config MV64X60_NEW_BASE
hex "Set bridge base used by kernel"
default "0xf1000000"
help
If the current base address of the bridge's registers is not where
you want it, set this value to the address that you want it moved to.
endmenu
config NONMONARCH_SUPPORT
bool "Enable Non-Monarch Support"
depends on PRPMC800
config HARRIER
bool
depends on PRPMC800
default y
config EPIC_SERIAL_MODE
bool
depends on 6xx && (LOPEC || SANDPOINT)
default y
config MPC10X_BRIDGE
bool
depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
select PPC_INDIRECT_PCI
default y
config MPC10X_OPENPIC
bool
depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
default y
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
config SANDPOINT_ENABLE_UART1
bool "Enable DUART mode on Sandpoint"
depends on SANDPOINT
help
If this option is enabled then the MPC824x processor will run
in DUART mode instead of UART mode.
config HARRIER_STORE_GATHERING
bool "Enable Harrier store gathering"
depends on HARRIER
config MVME5100_IPMC761_PRESENT
bool "MVME5100 configured with an IPMC761"
depends on MVME5100
select PPC_I8259
config SPRUCE_BAUD_33M
bool "Spruce baud clock support"
depends on SPRUCE