| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2013 Intel Corporation. All rights reserved. |
| */ |
| |
| #define pr_fmt(fmt) "nci_spi: %s: " fmt, __func__ |
| |
| #include <linux/module.h> |
| |
| #include <linux/export.h> |
| #include <linux/spi/spi.h> |
| #include <linux/crc-ccitt.h> |
| #include <net/nfc/nci_core.h> |
| |
| #define NCI_SPI_ACK_SHIFT 6 |
| #define NCI_SPI_MSB_PAYLOAD_MASK 0x3F |
| |
| #define NCI_SPI_SEND_TIMEOUT (NCI_CMD_TIMEOUT > NCI_DATA_TIMEOUT ? \ |
| NCI_CMD_TIMEOUT : NCI_DATA_TIMEOUT) |
| |
| #define NCI_SPI_DIRECT_WRITE 0x01 |
| #define NCI_SPI_DIRECT_READ 0x02 |
| |
| #define ACKNOWLEDGE_NONE 0 |
| #define ACKNOWLEDGE_ACK 1 |
| #define ACKNOWLEDGE_NACK 2 |
| |
| #define CRC_INIT 0xFFFF |
| |
| static int __nci_spi_send(struct nci_spi *nspi, const struct sk_buff *skb, |
| int cs_change) |
| { |
| struct spi_message m; |
| struct spi_transfer t; |
| |
| memset(&t, 0, sizeof(struct spi_transfer)); |
| /* a NULL skb means we just want the SPI chip select line to raise */ |
| if (skb) { |
| t.tx_buf = skb->data; |
| t.len = skb->len; |
| } else { |
| /* still set tx_buf non NULL to make the driver happy */ |
| t.tx_buf = &t; |
| t.len = 0; |
| } |
| t.cs_change = cs_change; |
| t.delay.value = nspi->xfer_udelay; |
| t.delay.unit = SPI_DELAY_UNIT_USECS; |
| t.speed_hz = nspi->xfer_speed_hz; |
| |
| spi_message_init(&m); |
| spi_message_add_tail(&t, &m); |
| |
| return spi_sync(nspi->spi, &m); |
| } |
| |
| int nci_spi_send(struct nci_spi *nspi, |
| struct completion *write_handshake_completion, |
| struct sk_buff *skb) |
| { |
| unsigned int payload_len = skb->len; |
| unsigned char *hdr; |
| int ret; |
| long completion_rc; |
| |
| /* add the NCI SPI header to the start of the buffer */ |
| hdr = skb_push(skb, NCI_SPI_HDR_LEN); |
| hdr[0] = NCI_SPI_DIRECT_WRITE; |
| hdr[1] = nspi->acknowledge_mode; |
| hdr[2] = payload_len >> 8; |
| hdr[3] = payload_len & 0xFF; |
| |
| if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) { |
| u16 crc; |
| |
| crc = crc_ccitt(CRC_INIT, skb->data, skb->len); |
| skb_put_u8(skb, crc >> 8); |
| skb_put_u8(skb, crc & 0xFF); |
| } |
| |
| if (write_handshake_completion) { |
| /* Trick SPI driver to raise chip select */ |
| ret = __nci_spi_send(nspi, NULL, 1); |
| if (ret) |
| goto done; |
| |
| /* wait for NFC chip hardware handshake to complete */ |
| if (wait_for_completion_timeout(write_handshake_completion, |
| msecs_to_jiffies(1000)) == 0) { |
| ret = -ETIME; |
| goto done; |
| } |
| } |
| |
| ret = __nci_spi_send(nspi, skb, 0); |
| if (ret != 0 || nspi->acknowledge_mode == NCI_SPI_CRC_DISABLED) |
| goto done; |
| |
| reinit_completion(&nspi->req_completion); |
| completion_rc = wait_for_completion_interruptible_timeout( |
| &nspi->req_completion, |
| NCI_SPI_SEND_TIMEOUT); |
| |
| if (completion_rc <= 0 || nspi->req_result == ACKNOWLEDGE_NACK) |
| ret = -EIO; |
| |
| done: |
| kfree_skb(skb); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(nci_spi_send); |
| |
| /* ---- Interface to NCI SPI drivers ---- */ |
| |
| /** |
| * nci_spi_allocate_spi - allocate a new nci spi |
| * |
| * @spi: SPI device |
| * @acknowledge_mode: Acknowledge mode used by the NFC device |
| * @delay: delay between transactions in us |
| * @ndev: nci dev to send incoming nci frames to |
| */ |
| struct nci_spi *nci_spi_allocate_spi(struct spi_device *spi, |
| u8 acknowledge_mode, unsigned int delay, |
| struct nci_dev *ndev) |
| { |
| struct nci_spi *nspi; |
| |
| nspi = devm_kzalloc(&spi->dev, sizeof(struct nci_spi), GFP_KERNEL); |
| if (!nspi) |
| return NULL; |
| |
| nspi->acknowledge_mode = acknowledge_mode; |
| nspi->xfer_udelay = delay; |
| /* Use controller max SPI speed by default */ |
| nspi->xfer_speed_hz = 0; |
| nspi->spi = spi; |
| nspi->ndev = ndev; |
| init_completion(&nspi->req_completion); |
| |
| return nspi; |
| } |
| EXPORT_SYMBOL_GPL(nci_spi_allocate_spi); |
| |
| static int send_acknowledge(struct nci_spi *nspi, u8 acknowledge) |
| { |
| struct sk_buff *skb; |
| unsigned char *hdr; |
| u16 crc; |
| int ret; |
| |
| skb = nci_skb_alloc(nspi->ndev, 0, GFP_KERNEL); |
| if (!skb) |
| return -ENOMEM; |
| |
| /* add the NCI SPI header to the start of the buffer */ |
| hdr = skb_push(skb, NCI_SPI_HDR_LEN); |
| hdr[0] = NCI_SPI_DIRECT_WRITE; |
| hdr[1] = NCI_SPI_CRC_ENABLED; |
| hdr[2] = acknowledge << NCI_SPI_ACK_SHIFT; |
| hdr[3] = 0; |
| |
| crc = crc_ccitt(CRC_INIT, skb->data, skb->len); |
| skb_put_u8(skb, crc >> 8); |
| skb_put_u8(skb, crc & 0xFF); |
| |
| ret = __nci_spi_send(nspi, skb, 0); |
| |
| kfree_skb(skb); |
| |
| return ret; |
| } |
| |
| static struct sk_buff *__nci_spi_read(struct nci_spi *nspi) |
| { |
| struct sk_buff *skb; |
| struct spi_message m; |
| unsigned char req[2], resp_hdr[2]; |
| struct spi_transfer tx, rx; |
| unsigned short rx_len = 0; |
| int ret; |
| |
| spi_message_init(&m); |
| |
| memset(&tx, 0, sizeof(struct spi_transfer)); |
| req[0] = NCI_SPI_DIRECT_READ; |
| req[1] = nspi->acknowledge_mode; |
| tx.tx_buf = req; |
| tx.len = 2; |
| tx.cs_change = 0; |
| tx.speed_hz = nspi->xfer_speed_hz; |
| spi_message_add_tail(&tx, &m); |
| |
| memset(&rx, 0, sizeof(struct spi_transfer)); |
| rx.rx_buf = resp_hdr; |
| rx.len = 2; |
| rx.cs_change = 1; |
| rx.speed_hz = nspi->xfer_speed_hz; |
| spi_message_add_tail(&rx, &m); |
| |
| ret = spi_sync(nspi->spi, &m); |
| if (ret) |
| return NULL; |
| |
| if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) |
| rx_len = ((resp_hdr[0] & NCI_SPI_MSB_PAYLOAD_MASK) << 8) + |
| resp_hdr[1] + NCI_SPI_CRC_LEN; |
| else |
| rx_len = (resp_hdr[0] << 8) | resp_hdr[1]; |
| |
| skb = nci_skb_alloc(nspi->ndev, rx_len, GFP_KERNEL); |
| if (!skb) |
| return NULL; |
| |
| spi_message_init(&m); |
| |
| memset(&rx, 0, sizeof(struct spi_transfer)); |
| rx.rx_buf = skb_put(skb, rx_len); |
| rx.len = rx_len; |
| rx.cs_change = 0; |
| rx.delay.value = nspi->xfer_udelay; |
| rx.delay.unit = SPI_DELAY_UNIT_USECS; |
| rx.speed_hz = nspi->xfer_speed_hz; |
| spi_message_add_tail(&rx, &m); |
| |
| ret = spi_sync(nspi->spi, &m); |
| if (ret) |
| goto receive_error; |
| |
| if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) { |
| *(u8 *)skb_push(skb, 1) = resp_hdr[1]; |
| *(u8 *)skb_push(skb, 1) = resp_hdr[0]; |
| } |
| |
| return skb; |
| |
| receive_error: |
| kfree_skb(skb); |
| |
| return NULL; |
| } |
| |
| static int nci_spi_check_crc(struct sk_buff *skb) |
| { |
| u16 crc_data = (skb->data[skb->len - 2] << 8) | |
| skb->data[skb->len - 1]; |
| int ret; |
| |
| ret = (crc_ccitt(CRC_INIT, skb->data, skb->len - NCI_SPI_CRC_LEN) |
| == crc_data); |
| |
| skb_trim(skb, skb->len - NCI_SPI_CRC_LEN); |
| |
| return ret; |
| } |
| |
| static u8 nci_spi_get_ack(struct sk_buff *skb) |
| { |
| u8 ret; |
| |
| ret = skb->data[0] >> NCI_SPI_ACK_SHIFT; |
| |
| /* Remove NFCC part of the header: ACK, NACK and MSB payload len */ |
| skb_pull(skb, 2); |
| |
| return ret; |
| } |
| |
| /** |
| * nci_spi_read - read frame from NCI SPI drivers |
| * |
| * @nspi: The nci spi |
| * Context: can sleep |
| * |
| * This call may only be used from a context that may sleep. The sleep |
| * is non-interruptible, and has no timeout. |
| * |
| * It returns an allocated skb containing the frame on success, or NULL. |
| */ |
| struct sk_buff *nci_spi_read(struct nci_spi *nspi) |
| { |
| struct sk_buff *skb; |
| |
| /* Retrieve frame from SPI */ |
| skb = __nci_spi_read(nspi); |
| if (!skb) |
| goto done; |
| |
| if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) { |
| if (!nci_spi_check_crc(skb)) { |
| send_acknowledge(nspi, ACKNOWLEDGE_NACK); |
| goto done; |
| } |
| |
| /* In case of acknowledged mode: if ACK or NACK received, |
| * unblock completion of latest frame sent. |
| */ |
| nspi->req_result = nci_spi_get_ack(skb); |
| if (nspi->req_result) |
| complete(&nspi->req_completion); |
| } |
| |
| /* If there is no payload (ACK/NACK only frame), |
| * free the socket buffer |
| */ |
| if (!skb->len) { |
| kfree_skb(skb); |
| skb = NULL; |
| goto done; |
| } |
| |
| if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) |
| send_acknowledge(nspi, ACKNOWLEDGE_ACK); |
| |
| done: |
| |
| return skb; |
| } |
| EXPORT_SYMBOL_GPL(nci_spi_read); |
| |
| MODULE_LICENSE("GPL"); |