| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * SME code for cfg80211 |
| * both driver SME event handling and the SME implementation |
| * (for nl80211's connect() and wext) |
| * |
| * Copyright 2009 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright (C) 2009, 2020, 2022-2023 Intel Corporation. All rights reserved. |
| * Copyright 2017 Intel Deutschland GmbH |
| */ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| #include <linux/wireless.h> |
| #include <linux/export.h> |
| #include <net/iw_handler.h> |
| #include <net/cfg80211.h> |
| #include <net/rtnetlink.h> |
| #include "nl80211.h" |
| #include "reg.h" |
| #include "rdev-ops.h" |
| |
| /* |
| * Software SME in cfg80211, using auth/assoc/deauth calls to the |
| * driver. This is for implementing nl80211's connect/disconnect |
| * and wireless extensions (if configured.) |
| */ |
| |
| struct cfg80211_conn { |
| struct cfg80211_connect_params params; |
| /* these are sub-states of the _CONNECTING sme_state */ |
| enum { |
| CFG80211_CONN_SCANNING, |
| CFG80211_CONN_SCAN_AGAIN, |
| CFG80211_CONN_AUTHENTICATE_NEXT, |
| CFG80211_CONN_AUTHENTICATING, |
| CFG80211_CONN_AUTH_FAILED_TIMEOUT, |
| CFG80211_CONN_ASSOCIATE_NEXT, |
| CFG80211_CONN_ASSOCIATING, |
| CFG80211_CONN_ASSOC_FAILED, |
| CFG80211_CONN_ASSOC_FAILED_TIMEOUT, |
| CFG80211_CONN_DEAUTH, |
| CFG80211_CONN_ABANDON, |
| CFG80211_CONN_CONNECTED, |
| } state; |
| u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; |
| const u8 *ie; |
| size_t ie_len; |
| bool auto_auth, prev_bssid_valid; |
| }; |
| |
| static void cfg80211_sme_free(struct wireless_dev *wdev) |
| { |
| if (!wdev->conn) |
| return; |
| |
| kfree(wdev->conn->ie); |
| kfree(wdev->conn); |
| wdev->conn = NULL; |
| } |
| |
| static int cfg80211_conn_scan(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_scan_request *request; |
| int n_channels, err; |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| if (rdev->scan_req || rdev->scan_msg) |
| return -EBUSY; |
| |
| if (wdev->conn->params.channel) |
| n_channels = 1; |
| else |
| n_channels = ieee80211_get_num_supported_channels(wdev->wiphy); |
| |
| request = kzalloc(sizeof(*request) + sizeof(request->ssids[0]) + |
| sizeof(request->channels[0]) * n_channels, |
| GFP_KERNEL); |
| if (!request) |
| return -ENOMEM; |
| |
| if (wdev->conn->params.channel) { |
| enum nl80211_band band = wdev->conn->params.channel->band; |
| struct ieee80211_supported_band *sband = |
| wdev->wiphy->bands[band]; |
| |
| if (!sband) { |
| kfree(request); |
| return -EINVAL; |
| } |
| request->channels[0] = wdev->conn->params.channel; |
| request->rates[band] = (1 << sband->n_bitrates) - 1; |
| } else { |
| int i = 0, j; |
| enum nl80211_band band; |
| struct ieee80211_supported_band *bands; |
| struct ieee80211_channel *channel; |
| |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { |
| bands = wdev->wiphy->bands[band]; |
| if (!bands) |
| continue; |
| for (j = 0; j < bands->n_channels; j++) { |
| channel = &bands->channels[j]; |
| if (channel->flags & IEEE80211_CHAN_DISABLED) |
| continue; |
| request->channels[i++] = channel; |
| } |
| request->rates[band] = (1 << bands->n_bitrates) - 1; |
| } |
| n_channels = i; |
| } |
| request->n_channels = n_channels; |
| request->ssids = (void *)&request->channels[n_channels]; |
| request->n_ssids = 1; |
| |
| memcpy(request->ssids[0].ssid, wdev->conn->params.ssid, |
| wdev->conn->params.ssid_len); |
| request->ssids[0].ssid_len = wdev->conn->params.ssid_len; |
| |
| eth_broadcast_addr(request->bssid); |
| |
| request->wdev = wdev; |
| request->wiphy = &rdev->wiphy; |
| request->scan_start = jiffies; |
| |
| rdev->scan_req = request; |
| |
| err = rdev_scan(rdev, request); |
| if (!err) { |
| wdev->conn->state = CFG80211_CONN_SCANNING; |
| nl80211_send_scan_start(rdev, wdev); |
| dev_hold(wdev->netdev); |
| } else { |
| rdev->scan_req = NULL; |
| kfree(request); |
| } |
| return err; |
| } |
| |
| static int cfg80211_conn_do_work(struct wireless_dev *wdev, |
| enum nl80211_timeout_reason *treason) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_connect_params *params; |
| struct cfg80211_auth_request auth_req = {}; |
| struct cfg80211_assoc_request req = {}; |
| int err; |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return 0; |
| |
| params = &wdev->conn->params; |
| |
| switch (wdev->conn->state) { |
| case CFG80211_CONN_SCANNING: |
| /* didn't find it during scan ... */ |
| return -ENOENT; |
| case CFG80211_CONN_SCAN_AGAIN: |
| return cfg80211_conn_scan(wdev); |
| case CFG80211_CONN_AUTHENTICATE_NEXT: |
| if (WARN_ON(!rdev->ops->auth)) |
| return -EOPNOTSUPP; |
| wdev->conn->state = CFG80211_CONN_AUTHENTICATING; |
| auth_req.key = params->key; |
| auth_req.key_len = params->key_len; |
| auth_req.key_idx = params->key_idx; |
| auth_req.auth_type = params->auth_type; |
| auth_req.bss = cfg80211_get_bss(&rdev->wiphy, params->channel, |
| params->bssid, |
| params->ssid, params->ssid_len, |
| IEEE80211_BSS_TYPE_ESS, |
| IEEE80211_PRIVACY_ANY); |
| auth_req.link_id = -1; |
| err = cfg80211_mlme_auth(rdev, wdev->netdev, &auth_req); |
| cfg80211_put_bss(&rdev->wiphy, auth_req.bss); |
| return err; |
| case CFG80211_CONN_AUTH_FAILED_TIMEOUT: |
| *treason = NL80211_TIMEOUT_AUTH; |
| return -ENOTCONN; |
| case CFG80211_CONN_ASSOCIATE_NEXT: |
| if (WARN_ON(!rdev->ops->assoc)) |
| return -EOPNOTSUPP; |
| wdev->conn->state = CFG80211_CONN_ASSOCIATING; |
| if (wdev->conn->prev_bssid_valid) |
| req.prev_bssid = wdev->conn->prev_bssid; |
| req.ie = params->ie; |
| req.ie_len = params->ie_len; |
| req.use_mfp = params->mfp != NL80211_MFP_NO; |
| req.crypto = params->crypto; |
| req.flags = params->flags; |
| req.ht_capa = params->ht_capa; |
| req.ht_capa_mask = params->ht_capa_mask; |
| req.vht_capa = params->vht_capa; |
| req.vht_capa_mask = params->vht_capa_mask; |
| req.link_id = -1; |
| |
| req.bss = cfg80211_get_bss(&rdev->wiphy, params->channel, |
| params->bssid, |
| params->ssid, params->ssid_len, |
| IEEE80211_BSS_TYPE_ESS, |
| IEEE80211_PRIVACY_ANY); |
| if (!req.bss) { |
| err = -ENOENT; |
| } else { |
| err = cfg80211_mlme_assoc(rdev, wdev->netdev, &req); |
| cfg80211_put_bss(&rdev->wiphy, req.bss); |
| } |
| |
| if (err) |
| cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, |
| NULL, 0, |
| WLAN_REASON_DEAUTH_LEAVING, |
| false); |
| return err; |
| case CFG80211_CONN_ASSOC_FAILED_TIMEOUT: |
| *treason = NL80211_TIMEOUT_ASSOC; |
| fallthrough; |
| case CFG80211_CONN_ASSOC_FAILED: |
| cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, |
| NULL, 0, |
| WLAN_REASON_DEAUTH_LEAVING, false); |
| return -ENOTCONN; |
| case CFG80211_CONN_DEAUTH: |
| cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, |
| NULL, 0, |
| WLAN_REASON_DEAUTH_LEAVING, false); |
| fallthrough; |
| case CFG80211_CONN_ABANDON: |
| /* free directly, disconnected event already sent */ |
| cfg80211_sme_free(wdev); |
| return 0; |
| default: |
| return 0; |
| } |
| } |
| |
| void cfg80211_conn_work(struct work_struct *work) |
| { |
| struct cfg80211_registered_device *rdev = |
| container_of(work, struct cfg80211_registered_device, conn_work); |
| struct wireless_dev *wdev; |
| u8 bssid_buf[ETH_ALEN], *bssid = NULL; |
| enum nl80211_timeout_reason treason; |
| |
| wiphy_lock(&rdev->wiphy); |
| |
| list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { |
| if (!wdev->netdev) |
| continue; |
| |
| if (!netif_running(wdev->netdev)) |
| continue; |
| |
| if (!wdev->conn || |
| wdev->conn->state == CFG80211_CONN_CONNECTED) |
| continue; |
| |
| if (wdev->conn->params.bssid) { |
| memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN); |
| bssid = bssid_buf; |
| } |
| treason = NL80211_TIMEOUT_UNSPECIFIED; |
| if (cfg80211_conn_do_work(wdev, &treason)) { |
| struct cfg80211_connect_resp_params cr; |
| |
| memset(&cr, 0, sizeof(cr)); |
| cr.status = -1; |
| cr.links[0].bssid = bssid; |
| cr.timeout_reason = treason; |
| __cfg80211_connect_result(wdev->netdev, &cr, false); |
| } |
| } |
| |
| wiphy_unlock(&rdev->wiphy); |
| } |
| |
| static void cfg80211_step_auth_next(struct cfg80211_conn *conn, |
| struct cfg80211_bss *bss) |
| { |
| memcpy(conn->bssid, bss->bssid, ETH_ALEN); |
| conn->params.bssid = conn->bssid; |
| conn->params.channel = bss->channel; |
| conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; |
| } |
| |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ |
| static struct cfg80211_bss *cfg80211_get_conn_bss(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_bss *bss; |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| bss = cfg80211_get_bss(wdev->wiphy, wdev->conn->params.channel, |
| wdev->conn->params.bssid, |
| wdev->conn->params.ssid, |
| wdev->conn->params.ssid_len, |
| wdev->conn_bss_type, |
| IEEE80211_PRIVACY(wdev->conn->params.privacy)); |
| if (!bss) |
| return NULL; |
| |
| cfg80211_step_auth_next(wdev->conn, bss); |
| schedule_work(&rdev->conn_work); |
| |
| return bss; |
| } |
| |
| void cfg80211_sme_scan_done(struct net_device *dev) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_bss *bss; |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return; |
| |
| if (wdev->conn->state != CFG80211_CONN_SCANNING && |
| wdev->conn->state != CFG80211_CONN_SCAN_AGAIN) |
| return; |
| |
| bss = cfg80211_get_conn_bss(wdev); |
| if (bss) |
| cfg80211_put_bss(&rdev->wiphy, bss); |
| else |
| schedule_work(&rdev->conn_work); |
| } |
| |
| void cfg80211_sme_rx_auth(struct wireless_dev *wdev, const u8 *buf, size_t len) |
| { |
| struct wiphy *wiphy = wdev->wiphy; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); |
| struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf; |
| u16 status_code = le16_to_cpu(mgmt->u.auth.status_code); |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| if (!wdev->conn || wdev->conn->state == CFG80211_CONN_CONNECTED) |
| return; |
| |
| if (status_code == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG && |
| wdev->conn->auto_auth && |
| wdev->conn->params.auth_type != NL80211_AUTHTYPE_NETWORK_EAP) { |
| /* select automatically between only open, shared, leap */ |
| switch (wdev->conn->params.auth_type) { |
| case NL80211_AUTHTYPE_OPEN_SYSTEM: |
| if (wdev->connect_keys) |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_SHARED_KEY; |
| else |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_NETWORK_EAP; |
| break; |
| case NL80211_AUTHTYPE_SHARED_KEY: |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_NETWORK_EAP; |
| break; |
| default: |
| /* huh? */ |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_OPEN_SYSTEM; |
| break; |
| } |
| wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; |
| schedule_work(&rdev->conn_work); |
| } else if (status_code != WLAN_STATUS_SUCCESS) { |
| struct cfg80211_connect_resp_params cr; |
| |
| memset(&cr, 0, sizeof(cr)); |
| cr.status = status_code; |
| cr.links[0].bssid = mgmt->bssid; |
| cr.timeout_reason = NL80211_TIMEOUT_UNSPECIFIED; |
| __cfg80211_connect_result(wdev->netdev, &cr, false); |
| } else if (wdev->conn->state == CFG80211_CONN_AUTHENTICATING) { |
| wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT; |
| schedule_work(&rdev->conn_work); |
| } |
| } |
| |
| bool cfg80211_sme_rx_assoc_resp(struct wireless_dev *wdev, u16 status) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return false; |
| |
| if (status == WLAN_STATUS_SUCCESS) { |
| wdev->conn->state = CFG80211_CONN_CONNECTED; |
| return false; |
| } |
| |
| if (wdev->conn->prev_bssid_valid) { |
| /* |
| * Some stupid APs don't accept reassoc, so we |
| * need to fall back to trying regular assoc; |
| * return true so no event is sent to userspace. |
| */ |
| wdev->conn->prev_bssid_valid = false; |
| wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT; |
| schedule_work(&rdev->conn_work); |
| return true; |
| } |
| |
| wdev->conn->state = CFG80211_CONN_ASSOC_FAILED; |
| schedule_work(&rdev->conn_work); |
| return false; |
| } |
| |
| void cfg80211_sme_deauth(struct wireless_dev *wdev) |
| { |
| cfg80211_sme_free(wdev); |
| } |
| |
| void cfg80211_sme_auth_timeout(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return; |
| |
| wdev->conn->state = CFG80211_CONN_AUTH_FAILED_TIMEOUT; |
| schedule_work(&rdev->conn_work); |
| } |
| |
| void cfg80211_sme_disassoc(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return; |
| |
| wdev->conn->state = CFG80211_CONN_DEAUTH; |
| schedule_work(&rdev->conn_work); |
| } |
| |
| void cfg80211_sme_assoc_timeout(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return; |
| |
| wdev->conn->state = CFG80211_CONN_ASSOC_FAILED_TIMEOUT; |
| schedule_work(&rdev->conn_work); |
| } |
| |
| void cfg80211_sme_abandon_assoc(struct wireless_dev *wdev) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| if (!wdev->conn) |
| return; |
| |
| wdev->conn->state = CFG80211_CONN_ABANDON; |
| schedule_work(&rdev->conn_work); |
| } |
| |
| static void cfg80211_wdev_release_bsses(struct wireless_dev *wdev) |
| { |
| unsigned int link; |
| |
| for_each_valid_link(wdev, link) { |
| if (!wdev->links[link].client.current_bss) |
| continue; |
| cfg80211_unhold_bss(wdev->links[link].client.current_bss); |
| cfg80211_put_bss(wdev->wiphy, |
| &wdev->links[link].client.current_bss->pub); |
| wdev->links[link].client.current_bss = NULL; |
| } |
| } |
| |
| void cfg80211_wdev_release_link_bsses(struct wireless_dev *wdev, u16 link_mask) |
| { |
| unsigned int link; |
| |
| for_each_valid_link(wdev, link) { |
| if (!wdev->links[link].client.current_bss || |
| !(link_mask & BIT(link))) |
| continue; |
| cfg80211_unhold_bss(wdev->links[link].client.current_bss); |
| cfg80211_put_bss(wdev->wiphy, |
| &wdev->links[link].client.current_bss->pub); |
| wdev->links[link].client.current_bss = NULL; |
| } |
| } |
| |
| static int cfg80211_sme_get_conn_ies(struct wireless_dev *wdev, |
| const u8 *ies, size_t ies_len, |
| const u8 **out_ies, size_t *out_ies_len) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| u8 *buf; |
| size_t offs; |
| |
| if (!rdev->wiphy.extended_capabilities_len || |
| (ies && cfg80211_find_ie(WLAN_EID_EXT_CAPABILITY, ies, ies_len))) { |
| *out_ies = kmemdup(ies, ies_len, GFP_KERNEL); |
| if (!*out_ies) |
| return -ENOMEM; |
| *out_ies_len = ies_len; |
| return 0; |
| } |
| |
| buf = kmalloc(ies_len + rdev->wiphy.extended_capabilities_len + 2, |
| GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| if (ies_len) { |
| static const u8 before_extcapa[] = { |
| /* not listing IEs expected to be created by driver */ |
| WLAN_EID_RSN, |
| WLAN_EID_QOS_CAPA, |
| WLAN_EID_RRM_ENABLED_CAPABILITIES, |
| WLAN_EID_MOBILITY_DOMAIN, |
| WLAN_EID_SUPPORTED_REGULATORY_CLASSES, |
| WLAN_EID_BSS_COEX_2040, |
| }; |
| |
| offs = ieee80211_ie_split(ies, ies_len, before_extcapa, |
| ARRAY_SIZE(before_extcapa), 0); |
| memcpy(buf, ies, offs); |
| /* leave a whole for extended capabilities IE */ |
| memcpy(buf + offs + rdev->wiphy.extended_capabilities_len + 2, |
| ies + offs, ies_len - offs); |
| } else { |
| offs = 0; |
| } |
| |
| /* place extended capabilities IE (with only driver capabilities) */ |
| buf[offs] = WLAN_EID_EXT_CAPABILITY; |
| buf[offs + 1] = rdev->wiphy.extended_capabilities_len; |
| memcpy(buf + offs + 2, |
| rdev->wiphy.extended_capabilities, |
| rdev->wiphy.extended_capabilities_len); |
| |
| *out_ies = buf; |
| *out_ies_len = ies_len + rdev->wiphy.extended_capabilities_len + 2; |
| |
| return 0; |
| } |
| |
| static int cfg80211_sme_connect(struct wireless_dev *wdev, |
| struct cfg80211_connect_params *connect, |
| const u8 *prev_bssid) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_bss *bss; |
| int err; |
| |
| if (!rdev->ops->auth || !rdev->ops->assoc) |
| return -EOPNOTSUPP; |
| |
| cfg80211_wdev_release_bsses(wdev); |
| |
| if (wdev->connected) { |
| cfg80211_sme_free(wdev); |
| wdev->connected = false; |
| } |
| |
| if (wdev->conn) |
| return -EINPROGRESS; |
| |
| wdev->conn = kzalloc(sizeof(*wdev->conn), GFP_KERNEL); |
| if (!wdev->conn) |
| return -ENOMEM; |
| |
| /* |
| * Copy all parameters, and treat explicitly IEs, BSSID, SSID. |
| */ |
| memcpy(&wdev->conn->params, connect, sizeof(*connect)); |
| if (connect->bssid) { |
| wdev->conn->params.bssid = wdev->conn->bssid; |
| memcpy(wdev->conn->bssid, connect->bssid, ETH_ALEN); |
| } |
| |
| if (cfg80211_sme_get_conn_ies(wdev, connect->ie, connect->ie_len, |
| &wdev->conn->ie, |
| &wdev->conn->params.ie_len)) { |
| kfree(wdev->conn); |
| wdev->conn = NULL; |
| return -ENOMEM; |
| } |
| wdev->conn->params.ie = wdev->conn->ie; |
| |
| if (connect->auth_type == NL80211_AUTHTYPE_AUTOMATIC) { |
| wdev->conn->auto_auth = true; |
| /* start with open system ... should mostly work */ |
| wdev->conn->params.auth_type = |
| NL80211_AUTHTYPE_OPEN_SYSTEM; |
| } else { |
| wdev->conn->auto_auth = false; |
| } |
| |
| wdev->conn->params.ssid = wdev->u.client.ssid; |
| wdev->conn->params.ssid_len = wdev->u.client.ssid_len; |
| |
| /* see if we have the bss already */ |
| bss = cfg80211_get_bss(wdev->wiphy, wdev->conn->params.channel, |
| wdev->conn->params.bssid, |
| wdev->conn->params.ssid, |
| wdev->conn->params.ssid_len, |
| wdev->conn_bss_type, |
| IEEE80211_PRIVACY(wdev->conn->params.privacy)); |
| |
| if (prev_bssid) { |
| memcpy(wdev->conn->prev_bssid, prev_bssid, ETH_ALEN); |
| wdev->conn->prev_bssid_valid = true; |
| } |
| |
| /* we're good if we have a matching bss struct */ |
| if (bss) { |
| enum nl80211_timeout_reason treason; |
| |
| cfg80211_step_auth_next(wdev->conn, bss); |
| err = cfg80211_conn_do_work(wdev, &treason); |
| cfg80211_put_bss(wdev->wiphy, bss); |
| } else { |
| /* otherwise we'll need to scan for the AP first */ |
| err = cfg80211_conn_scan(wdev); |
| |
| /* |
| * If we can't scan right now, then we need to scan again |
| * after the current scan finished, since the parameters |
| * changed (unless we find a good AP anyway). |
| */ |
| if (err == -EBUSY) { |
| err = 0; |
| wdev->conn->state = CFG80211_CONN_SCAN_AGAIN; |
| } |
| } |
| |
| if (err) |
| cfg80211_sme_free(wdev); |
| |
| return err; |
| } |
| |
| static int cfg80211_sme_disconnect(struct wireless_dev *wdev, u16 reason) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| int err; |
| |
| if (!wdev->conn) |
| return 0; |
| |
| if (!rdev->ops->deauth) |
| return -EOPNOTSUPP; |
| |
| if (wdev->conn->state == CFG80211_CONN_SCANNING || |
| wdev->conn->state == CFG80211_CONN_SCAN_AGAIN) { |
| err = 0; |
| goto out; |
| } |
| |
| /* wdev->conn->params.bssid must be set if > SCANNING */ |
| err = cfg80211_mlme_deauth(rdev, wdev->netdev, |
| wdev->conn->params.bssid, |
| NULL, 0, reason, false); |
| out: |
| cfg80211_sme_free(wdev); |
| return err; |
| } |
| |
| /* |
| * code shared for in-device and software SME |
| */ |
| |
| static bool cfg80211_is_all_idle(void) |
| { |
| struct cfg80211_registered_device *rdev; |
| struct wireless_dev *wdev; |
| bool is_all_idle = true; |
| |
| /* |
| * All devices must be idle as otherwise if you are actively |
| * scanning some new beacon hints could be learned and would |
| * count as new regulatory hints. |
| * Also if there is any other active beaconing interface we |
| * need not issue a disconnect hint and reset any info such |
| * as chan dfs state, etc. |
| */ |
| for_each_rdev(rdev) { |
| wiphy_lock(&rdev->wiphy); |
| list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { |
| if (wdev->conn || wdev->connected || |
| cfg80211_beaconing_iface_active(wdev)) |
| is_all_idle = false; |
| } |
| wiphy_unlock(&rdev->wiphy); |
| } |
| |
| return is_all_idle; |
| } |
| |
| static void disconnect_work(struct work_struct *work) |
| { |
| rtnl_lock(); |
| if (cfg80211_is_all_idle()) |
| regulatory_hint_disconnect(); |
| rtnl_unlock(); |
| } |
| |
| DECLARE_WORK(cfg80211_disconnect_work, disconnect_work); |
| |
| static void |
| cfg80211_connect_result_release_bsses(struct wireless_dev *wdev, |
| struct cfg80211_connect_resp_params *cr) |
| { |
| unsigned int link; |
| |
| for_each_valid_link(cr, link) { |
| if (!cr->links[link].bss) |
| continue; |
| cfg80211_unhold_bss(bss_from_pub(cr->links[link].bss)); |
| cfg80211_put_bss(wdev->wiphy, cr->links[link].bss); |
| } |
| } |
| |
| /* |
| * API calls for drivers implementing connect/disconnect and |
| * SME event handling |
| */ |
| |
| /* This method must consume bss one way or another */ |
| void __cfg80211_connect_result(struct net_device *dev, |
| struct cfg80211_connect_resp_params *cr, |
| bool wextev) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| const struct element *country_elem = NULL; |
| const struct element *ssid; |
| const u8 *country_data; |
| u8 country_datalen; |
| #ifdef CONFIG_CFG80211_WEXT |
| union iwreq_data wrqu; |
| #endif |
| unsigned int link; |
| const u8 *connected_addr; |
| bool bss_not_found = false; |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && |
| wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) |
| goto out; |
| |
| if (cr->valid_links) { |
| if (WARN_ON(!cr->ap_mld_addr)) |
| goto out; |
| |
| for_each_valid_link(cr, link) { |
| if (WARN_ON(!cr->links[link].addr)) |
| goto out; |
| } |
| |
| if (WARN_ON(wdev->connect_keys)) |
| goto out; |
| } |
| |
| wdev->unprot_beacon_reported = 0; |
| nl80211_send_connect_result(wiphy_to_rdev(wdev->wiphy), dev, cr, |
| GFP_KERNEL); |
| connected_addr = cr->valid_links ? cr->ap_mld_addr : cr->links[0].bssid; |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| if (wextev && !cr->valid_links) { |
| if (cr->req_ie && cr->status == WLAN_STATUS_SUCCESS) { |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.data.length = cr->req_ie_len; |
| wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, |
| cr->req_ie); |
| } |
| |
| if (cr->resp_ie && cr->status == WLAN_STATUS_SUCCESS) { |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.data.length = cr->resp_ie_len; |
| wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, |
| cr->resp_ie); |
| } |
| |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| if (connected_addr && cr->status == WLAN_STATUS_SUCCESS) { |
| memcpy(wrqu.ap_addr.sa_data, connected_addr, ETH_ALEN); |
| memcpy(wdev->wext.prev_bssid, connected_addr, ETH_ALEN); |
| wdev->wext.prev_bssid_valid = true; |
| } |
| wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); |
| } |
| #endif |
| |
| if (cr->status == WLAN_STATUS_SUCCESS) { |
| if (!wiphy_to_rdev(wdev->wiphy)->ops->connect) { |
| for_each_valid_link(cr, link) { |
| if (WARN_ON_ONCE(!cr->links[link].bss)) |
| break; |
| } |
| } |
| |
| for_each_valid_link(cr, link) { |
| /* don't do extra lookups for failures */ |
| if (cr->links[link].status != WLAN_STATUS_SUCCESS) |
| continue; |
| |
| if (cr->links[link].bss) |
| continue; |
| |
| cr->links[link].bss = |
| cfg80211_get_bss(wdev->wiphy, NULL, |
| cr->links[link].bssid, |
| wdev->u.client.ssid, |
| wdev->u.client.ssid_len, |
| wdev->conn_bss_type, |
| IEEE80211_PRIVACY_ANY); |
| if (!cr->links[link].bss) { |
| bss_not_found = true; |
| break; |
| } |
| cfg80211_hold_bss(bss_from_pub(cr->links[link].bss)); |
| } |
| } |
| |
| cfg80211_wdev_release_bsses(wdev); |
| |
| if (cr->status != WLAN_STATUS_SUCCESS) { |
| kfree_sensitive(wdev->connect_keys); |
| wdev->connect_keys = NULL; |
| wdev->u.client.ssid_len = 0; |
| wdev->conn_owner_nlportid = 0; |
| cfg80211_connect_result_release_bsses(wdev, cr); |
| cfg80211_sme_free(wdev); |
| return; |
| } |
| |
| if (WARN_ON(bss_not_found)) { |
| cfg80211_connect_result_release_bsses(wdev, cr); |
| return; |
| } |
| |
| memset(wdev->links, 0, sizeof(wdev->links)); |
| for_each_valid_link(cr, link) { |
| if (cr->links[link].status == WLAN_STATUS_SUCCESS) |
| continue; |
| cr->valid_links &= ~BIT(link); |
| /* don't require bss pointer for failed links */ |
| if (!cr->links[link].bss) |
| continue; |
| cfg80211_unhold_bss(bss_from_pub(cr->links[link].bss)); |
| cfg80211_put_bss(wdev->wiphy, cr->links[link].bss); |
| } |
| wdev->valid_links = cr->valid_links; |
| for_each_valid_link(cr, link) |
| wdev->links[link].client.current_bss = |
| bss_from_pub(cr->links[link].bss); |
| wdev->connected = true; |
| ether_addr_copy(wdev->u.client.connected_addr, connected_addr); |
| if (cr->valid_links) { |
| for_each_valid_link(cr, link) |
| memcpy(wdev->links[link].addr, cr->links[link].addr, |
| ETH_ALEN); |
| } |
| |
| cfg80211_upload_connect_keys(wdev); |
| |
| rcu_read_lock(); |
| for_each_valid_link(cr, link) { |
| country_elem = |
| ieee80211_bss_get_elem(cr->links[link].bss, |
| WLAN_EID_COUNTRY); |
| if (country_elem) |
| break; |
| } |
| if (!country_elem) { |
| rcu_read_unlock(); |
| return; |
| } |
| |
| country_datalen = country_elem->datalen; |
| country_data = kmemdup(country_elem->data, country_datalen, GFP_ATOMIC); |
| rcu_read_unlock(); |
| |
| if (!country_data) |
| return; |
| |
| regulatory_hint_country_ie(wdev->wiphy, |
| cr->links[link].bss->channel->band, |
| country_data, country_datalen); |
| kfree(country_data); |
| |
| if (!wdev->u.client.ssid_len) { |
| rcu_read_lock(); |
| for_each_valid_link(cr, link) { |
| ssid = ieee80211_bss_get_elem(cr->links[link].bss, |
| WLAN_EID_SSID); |
| |
| if (!ssid || !ssid->datalen) |
| continue; |
| |
| memcpy(wdev->u.client.ssid, ssid->data, ssid->datalen); |
| wdev->u.client.ssid_len = ssid->datalen; |
| break; |
| } |
| rcu_read_unlock(); |
| } |
| |
| return; |
| out: |
| for_each_valid_link(cr, link) |
| cfg80211_put_bss(wdev->wiphy, cr->links[link].bss); |
| } |
| |
| static void cfg80211_update_link_bss(struct wireless_dev *wdev, |
| struct cfg80211_bss **bss) |
| { |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_internal_bss *ibss; |
| |
| if (!*bss) |
| return; |
| |
| ibss = bss_from_pub(*bss); |
| if (list_empty(&ibss->list)) { |
| struct cfg80211_bss *found = NULL, *tmp = *bss; |
| |
| found = cfg80211_get_bss(wdev->wiphy, NULL, |
| (*bss)->bssid, |
| wdev->u.client.ssid, |
| wdev->u.client.ssid_len, |
| wdev->conn_bss_type, |
| IEEE80211_PRIVACY_ANY); |
| if (found) { |
| /* The same BSS is already updated so use it |
| * instead, as it has latest info. |
| */ |
| *bss = found; |
| } else { |
| /* Update with BSS provided by driver, it will |
| * be freshly added and ref cnted, we can free |
| * the old one. |
| * |
| * signal_valid can be false, as we are not |
| * expecting the BSS to be found. |
| * |
| * keep the old timestamp to avoid confusion |
| */ |
| cfg80211_bss_update(rdev, ibss, false, |
| ibss->ts); |
| } |
| |
| cfg80211_put_bss(wdev->wiphy, tmp); |
| } |
| } |
| |
| /* Consumes bss object(s) one way or another */ |
| void cfg80211_connect_done(struct net_device *dev, |
| struct cfg80211_connect_resp_params *params, |
| gfp_t gfp) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_event *ev; |
| unsigned long flags; |
| u8 *next; |
| size_t link_info_size = 0; |
| unsigned int link; |
| |
| for_each_valid_link(params, link) { |
| cfg80211_update_link_bss(wdev, ¶ms->links[link].bss); |
| link_info_size += params->links[link].bssid ? ETH_ALEN : 0; |
| link_info_size += params->links[link].addr ? ETH_ALEN : 0; |
| } |
| |
| ev = kzalloc(sizeof(*ev) + (params->ap_mld_addr ? ETH_ALEN : 0) + |
| params->req_ie_len + params->resp_ie_len + |
| params->fils.kek_len + params->fils.pmk_len + |
| (params->fils.pmkid ? WLAN_PMKID_LEN : 0) + link_info_size, |
| gfp); |
| |
| if (!ev) { |
| for_each_valid_link(params, link) |
| cfg80211_put_bss(wdev->wiphy, |
| params->links[link].bss); |
| return; |
| } |
| |
| ev->type = EVENT_CONNECT_RESULT; |
| next = ((u8 *)ev) + sizeof(*ev); |
| if (params->ap_mld_addr) { |
| ev->cr.ap_mld_addr = next; |
| memcpy((void *)ev->cr.ap_mld_addr, params->ap_mld_addr, |
| ETH_ALEN); |
| next += ETH_ALEN; |
| } |
| if (params->req_ie_len) { |
| ev->cr.req_ie = next; |
| ev->cr.req_ie_len = params->req_ie_len; |
| memcpy((void *)ev->cr.req_ie, params->req_ie, |
| params->req_ie_len); |
| next += params->req_ie_len; |
| } |
| if (params->resp_ie_len) { |
| ev->cr.resp_ie = next; |
| ev->cr.resp_ie_len = params->resp_ie_len; |
| memcpy((void *)ev->cr.resp_ie, params->resp_ie, |
| params->resp_ie_len); |
| next += params->resp_ie_len; |
| } |
| if (params->fils.kek_len) { |
| ev->cr.fils.kek = next; |
| ev->cr.fils.kek_len = params->fils.kek_len; |
| memcpy((void *)ev->cr.fils.kek, params->fils.kek, |
| params->fils.kek_len); |
| next += params->fils.kek_len; |
| } |
| if (params->fils.pmk_len) { |
| ev->cr.fils.pmk = next; |
| ev->cr.fils.pmk_len = params->fils.pmk_len; |
| memcpy((void *)ev->cr.fils.pmk, params->fils.pmk, |
| params->fils.pmk_len); |
| next += params->fils.pmk_len; |
| } |
| if (params->fils.pmkid) { |
| ev->cr.fils.pmkid = next; |
| memcpy((void *)ev->cr.fils.pmkid, params->fils.pmkid, |
| WLAN_PMKID_LEN); |
| next += WLAN_PMKID_LEN; |
| } |
| ev->cr.fils.update_erp_next_seq_num = params->fils.update_erp_next_seq_num; |
| if (params->fils.update_erp_next_seq_num) |
| ev->cr.fils.erp_next_seq_num = params->fils.erp_next_seq_num; |
| ev->cr.valid_links = params->valid_links; |
| for_each_valid_link(params, link) { |
| if (params->links[link].bss) |
| cfg80211_hold_bss( |
| bss_from_pub(params->links[link].bss)); |
| ev->cr.links[link].bss = params->links[link].bss; |
| |
| if (params->links[link].addr) { |
| ev->cr.links[link].addr = next; |
| memcpy((void *)ev->cr.links[link].addr, |
| params->links[link].addr, |
| ETH_ALEN); |
| next += ETH_ALEN; |
| } |
| if (params->links[link].bssid) { |
| ev->cr.links[link].bssid = next; |
| memcpy((void *)ev->cr.links[link].bssid, |
| params->links[link].bssid, |
| ETH_ALEN); |
| next += ETH_ALEN; |
| } |
| } |
| ev->cr.status = params->status; |
| ev->cr.timeout_reason = params->timeout_reason; |
| |
| spin_lock_irqsave(&wdev->event_lock, flags); |
| list_add_tail(&ev->list, &wdev->event_list); |
| spin_unlock_irqrestore(&wdev->event_lock, flags); |
| queue_work(cfg80211_wq, &rdev->event_work); |
| } |
| EXPORT_SYMBOL(cfg80211_connect_done); |
| |
| /* Consumes bss object one way or another */ |
| void __cfg80211_roamed(struct wireless_dev *wdev, |
| struct cfg80211_roam_info *info) |
| { |
| #ifdef CONFIG_CFG80211_WEXT |
| union iwreq_data wrqu; |
| #endif |
| unsigned int link; |
| const u8 *connected_addr; |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && |
| wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) |
| goto out; |
| |
| if (WARN_ON(!wdev->connected)) |
| goto out; |
| |
| if (info->valid_links) { |
| if (WARN_ON(!info->ap_mld_addr)) |
| goto out; |
| |
| for_each_valid_link(info, link) { |
| if (WARN_ON(!info->links[link].addr)) |
| goto out; |
| } |
| } |
| |
| cfg80211_wdev_release_bsses(wdev); |
| |
| for_each_valid_link(info, link) { |
| if (WARN_ON(!info->links[link].bss)) |
| goto out; |
| } |
| |
| memset(wdev->links, 0, sizeof(wdev->links)); |
| wdev->valid_links = info->valid_links; |
| for_each_valid_link(info, link) { |
| cfg80211_hold_bss(bss_from_pub(info->links[link].bss)); |
| wdev->links[link].client.current_bss = |
| bss_from_pub(info->links[link].bss); |
| } |
| |
| connected_addr = info->valid_links ? |
| info->ap_mld_addr : |
| info->links[0].bss->bssid; |
| ether_addr_copy(wdev->u.client.connected_addr, connected_addr); |
| if (info->valid_links) { |
| for_each_valid_link(info, link) |
| memcpy(wdev->links[link].addr, info->links[link].addr, |
| ETH_ALEN); |
| } |
| wdev->unprot_beacon_reported = 0; |
| nl80211_send_roamed(wiphy_to_rdev(wdev->wiphy), |
| wdev->netdev, info, GFP_KERNEL); |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| if (!info->valid_links) { |
| if (info->req_ie) { |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.data.length = info->req_ie_len; |
| wireless_send_event(wdev->netdev, IWEVASSOCREQIE, |
| &wrqu, info->req_ie); |
| } |
| |
| if (info->resp_ie) { |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.data.length = info->resp_ie_len; |
| wireless_send_event(wdev->netdev, IWEVASSOCRESPIE, |
| &wrqu, info->resp_ie); |
| } |
| |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(wrqu.ap_addr.sa_data, connected_addr, ETH_ALEN); |
| memcpy(wdev->wext.prev_bssid, connected_addr, ETH_ALEN); |
| wdev->wext.prev_bssid_valid = true; |
| wireless_send_event(wdev->netdev, SIOCGIWAP, &wrqu, NULL); |
| } |
| #endif |
| |
| return; |
| out: |
| for_each_valid_link(info, link) |
| cfg80211_put_bss(wdev->wiphy, info->links[link].bss); |
| } |
| |
| /* Consumes info->links.bss object(s) one way or another */ |
| void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info, |
| gfp_t gfp) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_event *ev; |
| unsigned long flags; |
| u8 *next; |
| unsigned int link; |
| size_t link_info_size = 0; |
| bool bss_not_found = false; |
| |
| for_each_valid_link(info, link) { |
| link_info_size += info->links[link].addr ? ETH_ALEN : 0; |
| link_info_size += info->links[link].bssid ? ETH_ALEN : 0; |
| |
| if (info->links[link].bss) |
| continue; |
| |
| info->links[link].bss = |
| cfg80211_get_bss(wdev->wiphy, |
| info->links[link].channel, |
| info->links[link].bssid, |
| wdev->u.client.ssid, |
| wdev->u.client.ssid_len, |
| wdev->conn_bss_type, |
| IEEE80211_PRIVACY_ANY); |
| |
| if (!info->links[link].bss) { |
| bss_not_found = true; |
| break; |
| } |
| } |
| |
| if (WARN_ON(bss_not_found)) |
| goto out; |
| |
| ev = kzalloc(sizeof(*ev) + info->req_ie_len + info->resp_ie_len + |
| info->fils.kek_len + info->fils.pmk_len + |
| (info->fils.pmkid ? WLAN_PMKID_LEN : 0) + |
| (info->ap_mld_addr ? ETH_ALEN : 0) + link_info_size, gfp); |
| if (!ev) |
| goto out; |
| |
| ev->type = EVENT_ROAMED; |
| next = ((u8 *)ev) + sizeof(*ev); |
| if (info->req_ie_len) { |
| ev->rm.req_ie = next; |
| ev->rm.req_ie_len = info->req_ie_len; |
| memcpy((void *)ev->rm.req_ie, info->req_ie, info->req_ie_len); |
| next += info->req_ie_len; |
| } |
| if (info->resp_ie_len) { |
| ev->rm.resp_ie = next; |
| ev->rm.resp_ie_len = info->resp_ie_len; |
| memcpy((void *)ev->rm.resp_ie, info->resp_ie, |
| info->resp_ie_len); |
| next += info->resp_ie_len; |
| } |
| if (info->fils.kek_len) { |
| ev->rm.fils.kek = next; |
| ev->rm.fils.kek_len = info->fils.kek_len; |
| memcpy((void *)ev->rm.fils.kek, info->fils.kek, |
| info->fils.kek_len); |
| next += info->fils.kek_len; |
| } |
| if (info->fils.pmk_len) { |
| ev->rm.fils.pmk = next; |
| ev->rm.fils.pmk_len = info->fils.pmk_len; |
| memcpy((void *)ev->rm.fils.pmk, info->fils.pmk, |
| info->fils.pmk_len); |
| next += info->fils.pmk_len; |
| } |
| if (info->fils.pmkid) { |
| ev->rm.fils.pmkid = next; |
| memcpy((void *)ev->rm.fils.pmkid, info->fils.pmkid, |
| WLAN_PMKID_LEN); |
| next += WLAN_PMKID_LEN; |
| } |
| ev->rm.fils.update_erp_next_seq_num = info->fils.update_erp_next_seq_num; |
| if (info->fils.update_erp_next_seq_num) |
| ev->rm.fils.erp_next_seq_num = info->fils.erp_next_seq_num; |
| if (info->ap_mld_addr) { |
| ev->rm.ap_mld_addr = next; |
| memcpy((void *)ev->rm.ap_mld_addr, info->ap_mld_addr, |
| ETH_ALEN); |
| next += ETH_ALEN; |
| } |
| ev->rm.valid_links = info->valid_links; |
| for_each_valid_link(info, link) { |
| ev->rm.links[link].bss = info->links[link].bss; |
| |
| if (info->links[link].addr) { |
| ev->rm.links[link].addr = next; |
| memcpy((void *)ev->rm.links[link].addr, |
| info->links[link].addr, |
| ETH_ALEN); |
| next += ETH_ALEN; |
| } |
| |
| if (info->links[link].bssid) { |
| ev->rm.links[link].bssid = next; |
| memcpy((void *)ev->rm.links[link].bssid, |
| info->links[link].bssid, |
| ETH_ALEN); |
| next += ETH_ALEN; |
| } |
| } |
| |
| spin_lock_irqsave(&wdev->event_lock, flags); |
| list_add_tail(&ev->list, &wdev->event_list); |
| spin_unlock_irqrestore(&wdev->event_lock, flags); |
| queue_work(cfg80211_wq, &rdev->event_work); |
| |
| return; |
| out: |
| for_each_valid_link(info, link) |
| cfg80211_put_bss(wdev->wiphy, info->links[link].bss); |
| |
| } |
| EXPORT_SYMBOL(cfg80211_roamed); |
| |
| void __cfg80211_port_authorized(struct wireless_dev *wdev, const u8 *peer_addr, |
| const u8 *td_bitmap, u8 td_bitmap_len) |
| { |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && |
| wdev->iftype != NL80211_IFTYPE_P2P_CLIENT && |
| wdev->iftype != NL80211_IFTYPE_AP && |
| wdev->iftype != NL80211_IFTYPE_P2P_GO)) |
| return; |
| |
| if (wdev->iftype == NL80211_IFTYPE_STATION || |
| wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) { |
| if (WARN_ON(!wdev->connected) || |
| WARN_ON(!ether_addr_equal(wdev->u.client.connected_addr, peer_addr))) |
| return; |
| } |
| |
| nl80211_send_port_authorized(wiphy_to_rdev(wdev->wiphy), wdev->netdev, |
| peer_addr, td_bitmap, td_bitmap_len); |
| } |
| |
| void cfg80211_port_authorized(struct net_device *dev, const u8 *peer_addr, |
| const u8 *td_bitmap, u8 td_bitmap_len, gfp_t gfp) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_event *ev; |
| unsigned long flags; |
| |
| if (WARN_ON(!peer_addr)) |
| return; |
| |
| ev = kzalloc(sizeof(*ev) + td_bitmap_len, gfp); |
| if (!ev) |
| return; |
| |
| ev->type = EVENT_PORT_AUTHORIZED; |
| memcpy(ev->pa.peer_addr, peer_addr, ETH_ALEN); |
| ev->pa.td_bitmap = ((u8 *)ev) + sizeof(*ev); |
| ev->pa.td_bitmap_len = td_bitmap_len; |
| memcpy((void *)ev->pa.td_bitmap, td_bitmap, td_bitmap_len); |
| |
| /* |
| * Use the wdev event list so that if there are pending |
| * connected/roamed events, they will be reported first. |
| */ |
| spin_lock_irqsave(&wdev->event_lock, flags); |
| list_add_tail(&ev->list, &wdev->event_list); |
| spin_unlock_irqrestore(&wdev->event_lock, flags); |
| queue_work(cfg80211_wq, &rdev->event_work); |
| } |
| EXPORT_SYMBOL(cfg80211_port_authorized); |
| |
| void __cfg80211_disconnected(struct net_device *dev, const u8 *ie, |
| size_t ie_len, u16 reason, bool from_ap) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| int i; |
| #ifdef CONFIG_CFG80211_WEXT |
| union iwreq_data wrqu; |
| #endif |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION && |
| wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) |
| return; |
| |
| cfg80211_wdev_release_bsses(wdev); |
| wdev->connected = false; |
| wdev->u.client.ssid_len = 0; |
| wdev->conn_owner_nlportid = 0; |
| kfree_sensitive(wdev->connect_keys); |
| wdev->connect_keys = NULL; |
| |
| nl80211_send_disconnected(rdev, dev, reason, ie, ie_len, from_ap); |
| |
| /* stop critical protocol if supported */ |
| if (rdev->ops->crit_proto_stop && rdev->crit_proto_nlportid) { |
| rdev->crit_proto_nlportid = 0; |
| rdev_crit_proto_stop(rdev, wdev); |
| } |
| |
| /* |
| * Delete all the keys ... pairwise keys can't really |
| * exist any more anyway, but default keys might. |
| */ |
| if (rdev->ops->del_key) { |
| int max_key_idx = 5; |
| |
| if (wiphy_ext_feature_isset( |
| wdev->wiphy, |
| NL80211_EXT_FEATURE_BEACON_PROTECTION) || |
| wiphy_ext_feature_isset( |
| wdev->wiphy, |
| NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT)) |
| max_key_idx = 7; |
| for (i = 0; i <= max_key_idx; i++) |
| rdev_del_key(rdev, dev, -1, i, false, NULL); |
| } |
| |
| rdev_set_qos_map(rdev, dev, NULL); |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| memset(&wrqu, 0, sizeof(wrqu)); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); |
| wdev->wext.connect.ssid_len = 0; |
| #endif |
| |
| schedule_work(&cfg80211_disconnect_work); |
| } |
| |
| void cfg80211_disconnected(struct net_device *dev, u16 reason, |
| const u8 *ie, size_t ie_len, |
| bool locally_generated, gfp_t gfp) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| struct cfg80211_event *ev; |
| unsigned long flags; |
| |
| ev = kzalloc(sizeof(*ev) + ie_len, gfp); |
| if (!ev) |
| return; |
| |
| ev->type = EVENT_DISCONNECTED; |
| ev->dc.ie = ((u8 *)ev) + sizeof(*ev); |
| ev->dc.ie_len = ie_len; |
| memcpy((void *)ev->dc.ie, ie, ie_len); |
| ev->dc.reason = reason; |
| ev->dc.locally_generated = locally_generated; |
| |
| spin_lock_irqsave(&wdev->event_lock, flags); |
| list_add_tail(&ev->list, &wdev->event_list); |
| spin_unlock_irqrestore(&wdev->event_lock, flags); |
| queue_work(cfg80211_wq, &rdev->event_work); |
| } |
| EXPORT_SYMBOL(cfg80211_disconnected); |
| |
| /* |
| * API calls for nl80211/wext compatibility code |
| */ |
| int cfg80211_connect(struct cfg80211_registered_device *rdev, |
| struct net_device *dev, |
| struct cfg80211_connect_params *connect, |
| struct cfg80211_cached_keys *connkeys, |
| const u8 *prev_bssid) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| int err; |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| /* |
| * If we have an ssid_len, we're trying to connect or are |
| * already connected, so reject a new SSID unless it's the |
| * same (which is the case for re-association.) |
| */ |
| if (wdev->u.client.ssid_len && |
| (wdev->u.client.ssid_len != connect->ssid_len || |
| memcmp(wdev->u.client.ssid, connect->ssid, wdev->u.client.ssid_len))) |
| return -EALREADY; |
| |
| /* |
| * If connected, reject (re-)association unless prev_bssid |
| * matches the current BSSID. |
| */ |
| if (wdev->connected) { |
| if (!prev_bssid) |
| return -EALREADY; |
| if (!ether_addr_equal(prev_bssid, |
| wdev->u.client.connected_addr)) |
| return -ENOTCONN; |
| } |
| |
| /* |
| * Reject if we're in the process of connecting with WEP, |
| * this case isn't very interesting and trying to handle |
| * it would make the code much more complex. |
| */ |
| if (wdev->connect_keys) |
| return -EINPROGRESS; |
| |
| cfg80211_oper_and_ht_capa(&connect->ht_capa_mask, |
| rdev->wiphy.ht_capa_mod_mask); |
| cfg80211_oper_and_vht_capa(&connect->vht_capa_mask, |
| rdev->wiphy.vht_capa_mod_mask); |
| |
| if (connkeys && connkeys->def >= 0) { |
| int idx; |
| u32 cipher; |
| |
| idx = connkeys->def; |
| cipher = connkeys->params[idx].cipher; |
| /* If given a WEP key we may need it for shared key auth */ |
| if (cipher == WLAN_CIPHER_SUITE_WEP40 || |
| cipher == WLAN_CIPHER_SUITE_WEP104) { |
| connect->key_idx = idx; |
| connect->key = connkeys->params[idx].key; |
| connect->key_len = connkeys->params[idx].key_len; |
| |
| /* |
| * If ciphers are not set (e.g. when going through |
| * iwconfig), we have to set them appropriately here. |
| */ |
| if (connect->crypto.cipher_group == 0) |
| connect->crypto.cipher_group = cipher; |
| |
| if (connect->crypto.n_ciphers_pairwise == 0) { |
| connect->crypto.n_ciphers_pairwise = 1; |
| connect->crypto.ciphers_pairwise[0] = cipher; |
| } |
| } |
| } else { |
| if (WARN_ON(connkeys)) |
| return -EINVAL; |
| |
| /* connect can point to wdev->wext.connect which |
| * can hold key data from a previous connection |
| */ |
| connect->key = NULL; |
| connect->key_len = 0; |
| connect->key_idx = 0; |
| } |
| |
| wdev->connect_keys = connkeys; |
| memcpy(wdev->u.client.ssid, connect->ssid, connect->ssid_len); |
| wdev->u.client.ssid_len = connect->ssid_len; |
| |
| wdev->conn_bss_type = connect->pbss ? IEEE80211_BSS_TYPE_PBSS : |
| IEEE80211_BSS_TYPE_ESS; |
| |
| if (!rdev->ops->connect) |
| err = cfg80211_sme_connect(wdev, connect, prev_bssid); |
| else |
| err = rdev_connect(rdev, dev, connect); |
| |
| if (err) { |
| wdev->connect_keys = NULL; |
| /* |
| * This could be reassoc getting refused, don't clear |
| * ssid_len in that case. |
| */ |
| if (!wdev->connected) |
| wdev->u.client.ssid_len = 0; |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| int cfg80211_disconnect(struct cfg80211_registered_device *rdev, |
| struct net_device *dev, u16 reason, bool wextev) |
| { |
| struct wireless_dev *wdev = dev->ieee80211_ptr; |
| int err = 0; |
| |
| lockdep_assert_wiphy(wdev->wiphy); |
| |
| kfree_sensitive(wdev->connect_keys); |
| wdev->connect_keys = NULL; |
| |
| wdev->conn_owner_nlportid = 0; |
| |
| if (wdev->conn) |
| err = cfg80211_sme_disconnect(wdev, reason); |
| else if (!rdev->ops->disconnect) |
| cfg80211_mlme_down(rdev, dev); |
| else if (wdev->u.client.ssid_len) |
| err = rdev_disconnect(rdev, dev, reason); |
| |
| /* |
| * Clear ssid_len unless we actually were fully connected, |
| * in which case cfg80211_disconnected() will take care of |
| * this later. |
| */ |
| if (!wdev->connected) |
| wdev->u.client.ssid_len = 0; |
| |
| return err; |
| } |
| |
| /* |
| * Used to clean up after the connection / connection attempt owner socket |
| * disconnects |
| */ |
| void cfg80211_autodisconnect_wk(struct work_struct *work) |
| { |
| struct wireless_dev *wdev = |
| container_of(work, struct wireless_dev, disconnect_wk); |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); |
| |
| wiphy_lock(wdev->wiphy); |
| |
| if (wdev->conn_owner_nlportid) { |
| switch (wdev->iftype) { |
| case NL80211_IFTYPE_ADHOC: |
| cfg80211_leave_ibss(rdev, wdev->netdev, false); |
| break; |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_P2P_GO: |
| cfg80211_stop_ap(rdev, wdev->netdev, -1, false); |
| break; |
| case NL80211_IFTYPE_MESH_POINT: |
| cfg80211_leave_mesh(rdev, wdev->netdev); |
| break; |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_P2P_CLIENT: |
| /* |
| * Use disconnect_bssid if still connecting and |
| * ops->disconnect not implemented. Otherwise we can |
| * use cfg80211_disconnect. |
| */ |
| if (rdev->ops->disconnect || wdev->connected) |
| cfg80211_disconnect(rdev, wdev->netdev, |
| WLAN_REASON_DEAUTH_LEAVING, |
| true); |
| else |
| cfg80211_mlme_deauth(rdev, wdev->netdev, |
| wdev->disconnect_bssid, |
| NULL, 0, |
| WLAN_REASON_DEAUTH_LEAVING, |
| false); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| wiphy_unlock(wdev->wiphy); |
| } |