| // SPDX-License-Identifier: GPL-2.0-only |
| |
| #include <linux/clk.h> |
| #include <linux/of_clk.h> |
| #include <linux/minmax.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_data/simplefb.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <drm/drm_aperture.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_state_helper.h> |
| #include <drm/drm_connector.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_damage_helper.h> |
| #include <drm/drm_device.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_fbdev_generic.h> |
| #include <drm/drm_format_helper.h> |
| #include <drm/drm_gem_atomic_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_gem_shmem_helper.h> |
| #include <drm/drm_managed.h> |
| #include <drm/drm_modeset_helper_vtables.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #define DRIVER_NAME "simpledrm" |
| #define DRIVER_DESC "DRM driver for simple-framebuffer platform devices" |
| #define DRIVER_DATE "20200625" |
| #define DRIVER_MAJOR 1 |
| #define DRIVER_MINOR 0 |
| |
| /* |
| * Helpers for simplefb |
| */ |
| |
| static int |
| simplefb_get_validated_int(struct drm_device *dev, const char *name, |
| uint32_t value) |
| { |
| if (value > INT_MAX) { |
| drm_err(dev, "simplefb: invalid framebuffer %s of %u\n", |
| name, value); |
| return -EINVAL; |
| } |
| return (int)value; |
| } |
| |
| static int |
| simplefb_get_validated_int0(struct drm_device *dev, const char *name, |
| uint32_t value) |
| { |
| if (!value) { |
| drm_err(dev, "simplefb: invalid framebuffer %s of %u\n", |
| name, value); |
| return -EINVAL; |
| } |
| return simplefb_get_validated_int(dev, name, value); |
| } |
| |
| static const struct drm_format_info * |
| simplefb_get_validated_format(struct drm_device *dev, const char *format_name) |
| { |
| static const struct simplefb_format formats[] = SIMPLEFB_FORMATS; |
| const struct simplefb_format *fmt = formats; |
| const struct simplefb_format *end = fmt + ARRAY_SIZE(formats); |
| const struct drm_format_info *info; |
| |
| if (!format_name) { |
| drm_err(dev, "simplefb: missing framebuffer format\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| while (fmt < end) { |
| if (!strcmp(format_name, fmt->name)) { |
| info = drm_format_info(fmt->fourcc); |
| if (!info) |
| return ERR_PTR(-EINVAL); |
| return info; |
| } |
| ++fmt; |
| } |
| |
| drm_err(dev, "simplefb: unknown framebuffer format %s\n", |
| format_name); |
| |
| return ERR_PTR(-EINVAL); |
| } |
| |
| static int |
| simplefb_get_width_pd(struct drm_device *dev, |
| const struct simplefb_platform_data *pd) |
| { |
| return simplefb_get_validated_int0(dev, "width", pd->width); |
| } |
| |
| static int |
| simplefb_get_height_pd(struct drm_device *dev, |
| const struct simplefb_platform_data *pd) |
| { |
| return simplefb_get_validated_int0(dev, "height", pd->height); |
| } |
| |
| static int |
| simplefb_get_stride_pd(struct drm_device *dev, |
| const struct simplefb_platform_data *pd) |
| { |
| return simplefb_get_validated_int(dev, "stride", pd->stride); |
| } |
| |
| static const struct drm_format_info * |
| simplefb_get_format_pd(struct drm_device *dev, |
| const struct simplefb_platform_data *pd) |
| { |
| return simplefb_get_validated_format(dev, pd->format); |
| } |
| |
| static int |
| simplefb_read_u32_of(struct drm_device *dev, struct device_node *of_node, |
| const char *name, u32 *value) |
| { |
| int ret = of_property_read_u32(of_node, name, value); |
| |
| if (ret) |
| drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n", |
| name, ret); |
| return ret; |
| } |
| |
| static int |
| simplefb_read_string_of(struct drm_device *dev, struct device_node *of_node, |
| const char *name, const char **value) |
| { |
| int ret = of_property_read_string(of_node, name, value); |
| |
| if (ret) |
| drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n", |
| name, ret); |
| return ret; |
| } |
| |
| static int |
| simplefb_get_width_of(struct drm_device *dev, struct device_node *of_node) |
| { |
| u32 width; |
| int ret = simplefb_read_u32_of(dev, of_node, "width", &width); |
| |
| if (ret) |
| return ret; |
| return simplefb_get_validated_int0(dev, "width", width); |
| } |
| |
| static int |
| simplefb_get_height_of(struct drm_device *dev, struct device_node *of_node) |
| { |
| u32 height; |
| int ret = simplefb_read_u32_of(dev, of_node, "height", &height); |
| |
| if (ret) |
| return ret; |
| return simplefb_get_validated_int0(dev, "height", height); |
| } |
| |
| static int |
| simplefb_get_stride_of(struct drm_device *dev, struct device_node *of_node) |
| { |
| u32 stride; |
| int ret = simplefb_read_u32_of(dev, of_node, "stride", &stride); |
| |
| if (ret) |
| return ret; |
| return simplefb_get_validated_int(dev, "stride", stride); |
| } |
| |
| static const struct drm_format_info * |
| simplefb_get_format_of(struct drm_device *dev, struct device_node *of_node) |
| { |
| const char *format; |
| int ret = simplefb_read_string_of(dev, of_node, "format", &format); |
| |
| if (ret) |
| return ERR_PTR(ret); |
| return simplefb_get_validated_format(dev, format); |
| } |
| |
| static struct resource * |
| simplefb_get_memory_of(struct drm_device *dev, struct device_node *of_node) |
| { |
| struct device_node *np; |
| struct resource *res; |
| int err; |
| |
| np = of_parse_phandle(of_node, "memory-region", 0); |
| if (!np) |
| return NULL; |
| |
| res = devm_kzalloc(dev->dev, sizeof(*res), GFP_KERNEL); |
| if (!res) |
| return ERR_PTR(-ENOMEM); |
| |
| err = of_address_to_resource(np, 0, res); |
| if (err) |
| return ERR_PTR(err); |
| |
| if (of_property_present(of_node, "reg")) |
| drm_warn(dev, "preferring \"memory-region\" over \"reg\" property\n"); |
| |
| return res; |
| } |
| |
| /* |
| * Simple Framebuffer device |
| */ |
| |
| struct simpledrm_device { |
| struct drm_device dev; |
| |
| /* clocks */ |
| #if defined CONFIG_OF && defined CONFIG_COMMON_CLK |
| unsigned int clk_count; |
| struct clk **clks; |
| #endif |
| /* regulators */ |
| #if defined CONFIG_OF && defined CONFIG_REGULATOR |
| unsigned int regulator_count; |
| struct regulator **regulators; |
| #endif |
| |
| /* simplefb settings */ |
| struct drm_display_mode mode; |
| const struct drm_format_info *format; |
| unsigned int pitch; |
| |
| /* memory management */ |
| struct iosys_map screen_base; |
| |
| /* modesetting */ |
| uint32_t formats[8]; |
| size_t nformats; |
| struct drm_plane primary_plane; |
| struct drm_crtc crtc; |
| struct drm_encoder encoder; |
| struct drm_connector connector; |
| }; |
| |
| static struct simpledrm_device *simpledrm_device_of_dev(struct drm_device *dev) |
| { |
| return container_of(dev, struct simpledrm_device, dev); |
| } |
| |
| /* |
| * Hardware |
| */ |
| |
| #if defined CONFIG_OF && defined CONFIG_COMMON_CLK |
| /* |
| * Clock handling code. |
| * |
| * Here we handle the clocks property of our "simple-framebuffer" dt node. |
| * This is necessary so that we can make sure that any clocks needed by |
| * the display engine that the bootloader set up for us (and for which it |
| * provided a simplefb dt node), stay up, for the life of the simplefb |
| * driver. |
| * |
| * When the driver unloads, we cleanly disable, and then release the clocks. |
| * |
| * We only complain about errors here, no action is taken as the most likely |
| * error can only happen due to a mismatch between the bootloader which set |
| * up simplefb, and the clock definitions in the device tree. Chances are |
| * that there are no adverse effects, and if there are, a clean teardown of |
| * the fb probe will not help us much either. So just complain and carry on, |
| * and hope that the user actually gets a working fb at the end of things. |
| */ |
| |
| static void simpledrm_device_release_clocks(void *res) |
| { |
| struct simpledrm_device *sdev = simpledrm_device_of_dev(res); |
| unsigned int i; |
| |
| for (i = 0; i < sdev->clk_count; ++i) { |
| if (sdev->clks[i]) { |
| clk_disable_unprepare(sdev->clks[i]); |
| clk_put(sdev->clks[i]); |
| } |
| } |
| } |
| |
| static int simpledrm_device_init_clocks(struct simpledrm_device *sdev) |
| { |
| struct drm_device *dev = &sdev->dev; |
| struct platform_device *pdev = to_platform_device(dev->dev); |
| struct device_node *of_node = pdev->dev.of_node; |
| struct clk *clock; |
| unsigned int i; |
| int ret; |
| |
| if (dev_get_platdata(&pdev->dev) || !of_node) |
| return 0; |
| |
| sdev->clk_count = of_clk_get_parent_count(of_node); |
| if (!sdev->clk_count) |
| return 0; |
| |
| sdev->clks = drmm_kzalloc(dev, sdev->clk_count * sizeof(sdev->clks[0]), |
| GFP_KERNEL); |
| if (!sdev->clks) |
| return -ENOMEM; |
| |
| for (i = 0; i < sdev->clk_count; ++i) { |
| clock = of_clk_get(of_node, i); |
| if (IS_ERR(clock)) { |
| ret = PTR_ERR(clock); |
| if (ret == -EPROBE_DEFER) |
| goto err; |
| drm_err(dev, "clock %u not found: %d\n", i, ret); |
| continue; |
| } |
| ret = clk_prepare_enable(clock); |
| if (ret) { |
| drm_err(dev, "failed to enable clock %u: %d\n", |
| i, ret); |
| clk_put(clock); |
| continue; |
| } |
| sdev->clks[i] = clock; |
| } |
| |
| return devm_add_action_or_reset(&pdev->dev, |
| simpledrm_device_release_clocks, |
| sdev); |
| |
| err: |
| while (i) { |
| --i; |
| if (sdev->clks[i]) { |
| clk_disable_unprepare(sdev->clks[i]); |
| clk_put(sdev->clks[i]); |
| } |
| } |
| return ret; |
| } |
| #else |
| static int simpledrm_device_init_clocks(struct simpledrm_device *sdev) |
| { |
| return 0; |
| } |
| #endif |
| |
| #if defined CONFIG_OF && defined CONFIG_REGULATOR |
| |
| #define SUPPLY_SUFFIX "-supply" |
| |
| /* |
| * Regulator handling code. |
| * |
| * Here we handle the num-supplies and vin*-supply properties of our |
| * "simple-framebuffer" dt node. This is necessary so that we can make sure |
| * that any regulators needed by the display hardware that the bootloader |
| * set up for us (and for which it provided a simplefb dt node), stay up, |
| * for the life of the simplefb driver. |
| * |
| * When the driver unloads, we cleanly disable, and then release the |
| * regulators. |
| * |
| * We only complain about errors here, no action is taken as the most likely |
| * error can only happen due to a mismatch between the bootloader which set |
| * up simplefb, and the regulator definitions in the device tree. Chances are |
| * that there are no adverse effects, and if there are, a clean teardown of |
| * the fb probe will not help us much either. So just complain and carry on, |
| * and hope that the user actually gets a working fb at the end of things. |
| */ |
| |
| static void simpledrm_device_release_regulators(void *res) |
| { |
| struct simpledrm_device *sdev = simpledrm_device_of_dev(res); |
| unsigned int i; |
| |
| for (i = 0; i < sdev->regulator_count; ++i) { |
| if (sdev->regulators[i]) { |
| regulator_disable(sdev->regulators[i]); |
| regulator_put(sdev->regulators[i]); |
| } |
| } |
| } |
| |
| static int simpledrm_device_init_regulators(struct simpledrm_device *sdev) |
| { |
| struct drm_device *dev = &sdev->dev; |
| struct platform_device *pdev = to_platform_device(dev->dev); |
| struct device_node *of_node = pdev->dev.of_node; |
| struct property *prop; |
| struct regulator *regulator; |
| const char *p; |
| unsigned int count = 0, i = 0; |
| int ret; |
| |
| if (dev_get_platdata(&pdev->dev) || !of_node) |
| return 0; |
| |
| /* Count the number of regulator supplies */ |
| for_each_property_of_node(of_node, prop) { |
| p = strstr(prop->name, SUPPLY_SUFFIX); |
| if (p && p != prop->name) |
| ++count; |
| } |
| |
| if (!count) |
| return 0; |
| |
| sdev->regulators = drmm_kzalloc(dev, |
| count * sizeof(sdev->regulators[0]), |
| GFP_KERNEL); |
| if (!sdev->regulators) |
| return -ENOMEM; |
| |
| for_each_property_of_node(of_node, prop) { |
| char name[32]; /* 32 is max size of property name */ |
| size_t len; |
| |
| p = strstr(prop->name, SUPPLY_SUFFIX); |
| if (!p || p == prop->name) |
| continue; |
| len = strlen(prop->name) - strlen(SUPPLY_SUFFIX) + 1; |
| strscpy(name, prop->name, min(sizeof(name), len)); |
| |
| regulator = regulator_get_optional(&pdev->dev, name); |
| if (IS_ERR(regulator)) { |
| ret = PTR_ERR(regulator); |
| if (ret == -EPROBE_DEFER) |
| goto err; |
| drm_err(dev, "regulator %s not found: %d\n", |
| name, ret); |
| continue; |
| } |
| |
| ret = regulator_enable(regulator); |
| if (ret) { |
| drm_err(dev, "failed to enable regulator %u: %d\n", |
| i, ret); |
| regulator_put(regulator); |
| continue; |
| } |
| |
| sdev->regulators[i++] = regulator; |
| } |
| sdev->regulator_count = i; |
| |
| return devm_add_action_or_reset(&pdev->dev, |
| simpledrm_device_release_regulators, |
| sdev); |
| |
| err: |
| while (i) { |
| --i; |
| if (sdev->regulators[i]) { |
| regulator_disable(sdev->regulators[i]); |
| regulator_put(sdev->regulators[i]); |
| } |
| } |
| return ret; |
| } |
| #else |
| static int simpledrm_device_init_regulators(struct simpledrm_device *sdev) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Modesetting |
| */ |
| |
| static const uint64_t simpledrm_primary_plane_format_modifiers[] = { |
| DRM_FORMAT_MOD_LINEAR, |
| DRM_FORMAT_MOD_INVALID |
| }; |
| |
| static void simpledrm_primary_plane_helper_atomic_update(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); |
| struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); |
| struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); |
| struct drm_framebuffer *fb = plane_state->fb; |
| struct drm_device *dev = plane->dev; |
| struct simpledrm_device *sdev = simpledrm_device_of_dev(dev); |
| struct drm_atomic_helper_damage_iter iter; |
| struct drm_rect damage; |
| int ret, idx; |
| |
| ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE); |
| if (ret) |
| return; |
| |
| if (!drm_dev_enter(dev, &idx)) |
| goto out_drm_gem_fb_end_cpu_access; |
| |
| drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state); |
| drm_atomic_for_each_plane_damage(&iter, &damage) { |
| struct drm_rect dst_clip = plane_state->dst; |
| struct iosys_map dst = sdev->screen_base; |
| |
| if (!drm_rect_intersect(&dst_clip, &damage)) |
| continue; |
| |
| iosys_map_incr(&dst, drm_fb_clip_offset(sdev->pitch, sdev->format, &dst_clip)); |
| drm_fb_blit(&dst, &sdev->pitch, sdev->format->format, shadow_plane_state->data, |
| fb, &damage); |
| } |
| |
| drm_dev_exit(idx); |
| out_drm_gem_fb_end_cpu_access: |
| drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE); |
| } |
| |
| static void simpledrm_primary_plane_helper_atomic_disable(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_device *dev = plane->dev; |
| struct simpledrm_device *sdev = simpledrm_device_of_dev(dev); |
| int idx; |
| |
| if (!drm_dev_enter(dev, &idx)) |
| return; |
| |
| /* Clear screen to black if disabled */ |
| iosys_map_memset(&sdev->screen_base, 0, 0, sdev->pitch * sdev->mode.vdisplay); |
| |
| drm_dev_exit(idx); |
| } |
| |
| static const struct drm_plane_helper_funcs simpledrm_primary_plane_helper_funcs = { |
| DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, |
| .atomic_check = drm_plane_helper_atomic_check, |
| .atomic_update = simpledrm_primary_plane_helper_atomic_update, |
| .atomic_disable = simpledrm_primary_plane_helper_atomic_disable, |
| }; |
| |
| static const struct drm_plane_funcs simpledrm_primary_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .destroy = drm_plane_cleanup, |
| DRM_GEM_SHADOW_PLANE_FUNCS, |
| }; |
| |
| static enum drm_mode_status simpledrm_crtc_helper_mode_valid(struct drm_crtc *crtc, |
| const struct drm_display_mode *mode) |
| { |
| struct simpledrm_device *sdev = simpledrm_device_of_dev(crtc->dev); |
| |
| return drm_crtc_helper_mode_valid_fixed(crtc, mode, &sdev->mode); |
| } |
| |
| /* |
| * The CRTC is always enabled. Screen updates are performed by |
| * the primary plane's atomic_update function. Disabling clears |
| * the screen in the primary plane's atomic_disable function. |
| */ |
| static const struct drm_crtc_helper_funcs simpledrm_crtc_helper_funcs = { |
| .mode_valid = simpledrm_crtc_helper_mode_valid, |
| .atomic_check = drm_crtc_helper_atomic_check, |
| }; |
| |
| static const struct drm_crtc_funcs simpledrm_crtc_funcs = { |
| .reset = drm_atomic_helper_crtc_reset, |
| .destroy = drm_crtc_cleanup, |
| .set_config = drm_atomic_helper_set_config, |
| .page_flip = drm_atomic_helper_page_flip, |
| .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, |
| }; |
| |
| static const struct drm_encoder_funcs simpledrm_encoder_funcs = { |
| .destroy = drm_encoder_cleanup, |
| }; |
| |
| static int simpledrm_connector_helper_get_modes(struct drm_connector *connector) |
| { |
| struct simpledrm_device *sdev = simpledrm_device_of_dev(connector->dev); |
| |
| return drm_connector_helper_get_modes_fixed(connector, &sdev->mode); |
| } |
| |
| static const struct drm_connector_helper_funcs simpledrm_connector_helper_funcs = { |
| .get_modes = simpledrm_connector_helper_get_modes, |
| }; |
| |
| static const struct drm_connector_funcs simpledrm_connector_funcs = { |
| .reset = drm_atomic_helper_connector_reset, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = { |
| .fb_create = drm_gem_fb_create_with_dirty, |
| .atomic_check = drm_atomic_helper_check, |
| .atomic_commit = drm_atomic_helper_commit, |
| }; |
| |
| /* |
| * Init / Cleanup |
| */ |
| |
| static struct drm_display_mode simpledrm_mode(unsigned int width, |
| unsigned int height, |
| unsigned int width_mm, |
| unsigned int height_mm) |
| { |
| const struct drm_display_mode mode = { |
| DRM_MODE_INIT(60, width, height, width_mm, height_mm) |
| }; |
| |
| return mode; |
| } |
| |
| static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv, |
| struct platform_device *pdev) |
| { |
| const struct simplefb_platform_data *pd = dev_get_platdata(&pdev->dev); |
| struct device_node *of_node = pdev->dev.of_node; |
| struct simpledrm_device *sdev; |
| struct drm_device *dev; |
| int width, height, stride; |
| int width_mm = 0, height_mm = 0; |
| struct device_node *panel_node; |
| const struct drm_format_info *format; |
| struct resource *res, *mem = NULL; |
| struct drm_plane *primary_plane; |
| struct drm_crtc *crtc; |
| struct drm_encoder *encoder; |
| struct drm_connector *connector; |
| unsigned long max_width, max_height; |
| size_t nformats; |
| int ret; |
| |
| sdev = devm_drm_dev_alloc(&pdev->dev, drv, struct simpledrm_device, dev); |
| if (IS_ERR(sdev)) |
| return ERR_CAST(sdev); |
| dev = &sdev->dev; |
| platform_set_drvdata(pdev, sdev); |
| |
| /* |
| * Hardware settings |
| */ |
| |
| ret = simpledrm_device_init_clocks(sdev); |
| if (ret) |
| return ERR_PTR(ret); |
| ret = simpledrm_device_init_regulators(sdev); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| if (pd) { |
| width = simplefb_get_width_pd(dev, pd); |
| if (width < 0) |
| return ERR_PTR(width); |
| height = simplefb_get_height_pd(dev, pd); |
| if (height < 0) |
| return ERR_PTR(height); |
| stride = simplefb_get_stride_pd(dev, pd); |
| if (stride < 0) |
| return ERR_PTR(stride); |
| format = simplefb_get_format_pd(dev, pd); |
| if (IS_ERR(format)) |
| return ERR_CAST(format); |
| } else if (of_node) { |
| width = simplefb_get_width_of(dev, of_node); |
| if (width < 0) |
| return ERR_PTR(width); |
| height = simplefb_get_height_of(dev, of_node); |
| if (height < 0) |
| return ERR_PTR(height); |
| stride = simplefb_get_stride_of(dev, of_node); |
| if (stride < 0) |
| return ERR_PTR(stride); |
| format = simplefb_get_format_of(dev, of_node); |
| if (IS_ERR(format)) |
| return ERR_CAST(format); |
| mem = simplefb_get_memory_of(dev, of_node); |
| if (IS_ERR(mem)) |
| return ERR_CAST(mem); |
| panel_node = of_parse_phandle(of_node, "panel", 0); |
| if (panel_node) { |
| simplefb_read_u32_of(dev, panel_node, "width-mm", &width_mm); |
| simplefb_read_u32_of(dev, panel_node, "height-mm", &height_mm); |
| of_node_put(panel_node); |
| } |
| } else { |
| drm_err(dev, "no simplefb configuration found\n"); |
| return ERR_PTR(-ENODEV); |
| } |
| if (!stride) { |
| stride = drm_format_info_min_pitch(format, 0, width); |
| if (drm_WARN_ON(dev, !stride)) |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* |
| * Assume a monitor resolution of 96 dpi if physical dimensions |
| * are not specified to get a somewhat reasonable screen size. |
| */ |
| if (!width_mm) |
| width_mm = DRM_MODE_RES_MM(width, 96ul); |
| if (!height_mm) |
| height_mm = DRM_MODE_RES_MM(height, 96ul); |
| |
| sdev->mode = simpledrm_mode(width, height, width_mm, height_mm); |
| sdev->format = format; |
| sdev->pitch = stride; |
| |
| drm_dbg(dev, "display mode={" DRM_MODE_FMT "}\n", DRM_MODE_ARG(&sdev->mode)); |
| drm_dbg(dev, "framebuffer format=%p4cc, size=%dx%d, stride=%d byte\n", |
| &format->format, width, height, stride); |
| |
| /* |
| * Memory management |
| */ |
| |
| if (mem) { |
| void *screen_base; |
| |
| ret = devm_aperture_acquire_from_firmware(dev, mem->start, resource_size(mem)); |
| if (ret) { |
| drm_err(dev, "could not acquire memory range %pr: %d\n", mem, ret); |
| return ERR_PTR(ret); |
| } |
| |
| drm_dbg(dev, "using system memory framebuffer at %pr\n", mem); |
| |
| screen_base = devm_memremap(dev->dev, mem->start, resource_size(mem), MEMREMAP_WC); |
| if (IS_ERR(screen_base)) |
| return screen_base; |
| |
| iosys_map_set_vaddr(&sdev->screen_base, screen_base); |
| } else { |
| void __iomem *screen_base; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return ERR_PTR(-EINVAL); |
| |
| ret = devm_aperture_acquire_from_firmware(dev, res->start, resource_size(res)); |
| if (ret) { |
| drm_err(dev, "could not acquire memory range %pr: %d\n", &res, ret); |
| return ERR_PTR(ret); |
| } |
| |
| drm_dbg(dev, "using I/O memory framebuffer at %pr\n", res); |
| |
| mem = devm_request_mem_region(&pdev->dev, res->start, resource_size(res), |
| drv->name); |
| if (!mem) { |
| /* |
| * We cannot make this fatal. Sometimes this comes from magic |
| * spaces our resource handlers simply don't know about. Use |
| * the I/O-memory resource as-is and try to map that instead. |
| */ |
| drm_warn(dev, "could not acquire memory region %pr\n", res); |
| mem = res; |
| } |
| |
| screen_base = devm_ioremap_wc(&pdev->dev, mem->start, resource_size(mem)); |
| if (!screen_base) |
| return ERR_PTR(-ENOMEM); |
| |
| iosys_map_set_vaddr_iomem(&sdev->screen_base, screen_base); |
| } |
| |
| /* |
| * Modesetting |
| */ |
| |
| ret = drmm_mode_config_init(dev); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| max_width = max_t(unsigned long, width, DRM_SHADOW_PLANE_MAX_WIDTH); |
| max_height = max_t(unsigned long, height, DRM_SHADOW_PLANE_MAX_HEIGHT); |
| |
| dev->mode_config.min_width = width; |
| dev->mode_config.max_width = max_width; |
| dev->mode_config.min_height = height; |
| dev->mode_config.max_height = max_height; |
| dev->mode_config.preferred_depth = format->depth; |
| dev->mode_config.funcs = &simpledrm_mode_config_funcs; |
| |
| /* Primary plane */ |
| |
| nformats = drm_fb_build_fourcc_list(dev, &format->format, 1, |
| sdev->formats, ARRAY_SIZE(sdev->formats)); |
| |
| primary_plane = &sdev->primary_plane; |
| ret = drm_universal_plane_init(dev, primary_plane, 0, &simpledrm_primary_plane_funcs, |
| sdev->formats, nformats, |
| simpledrm_primary_plane_format_modifiers, |
| DRM_PLANE_TYPE_PRIMARY, NULL); |
| if (ret) |
| return ERR_PTR(ret); |
| drm_plane_helper_add(primary_plane, &simpledrm_primary_plane_helper_funcs); |
| drm_plane_enable_fb_damage_clips(primary_plane); |
| |
| /* CRTC */ |
| |
| crtc = &sdev->crtc; |
| ret = drm_crtc_init_with_planes(dev, crtc, primary_plane, NULL, |
| &simpledrm_crtc_funcs, NULL); |
| if (ret) |
| return ERR_PTR(ret); |
| drm_crtc_helper_add(crtc, &simpledrm_crtc_helper_funcs); |
| |
| /* Encoder */ |
| |
| encoder = &sdev->encoder; |
| ret = drm_encoder_init(dev, encoder, &simpledrm_encoder_funcs, |
| DRM_MODE_ENCODER_NONE, NULL); |
| if (ret) |
| return ERR_PTR(ret); |
| encoder->possible_crtcs = drm_crtc_mask(crtc); |
| |
| /* Connector */ |
| |
| connector = &sdev->connector; |
| ret = drm_connector_init(dev, connector, &simpledrm_connector_funcs, |
| DRM_MODE_CONNECTOR_Unknown); |
| if (ret) |
| return ERR_PTR(ret); |
| drm_connector_helper_add(connector, &simpledrm_connector_helper_funcs); |
| drm_connector_set_panel_orientation_with_quirk(connector, |
| DRM_MODE_PANEL_ORIENTATION_UNKNOWN, |
| width, height); |
| |
| ret = drm_connector_attach_encoder(connector, encoder); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| drm_mode_config_reset(dev); |
| |
| return sdev; |
| } |
| |
| /* |
| * DRM driver |
| */ |
| |
| DEFINE_DRM_GEM_FOPS(simpledrm_fops); |
| |
| static struct drm_driver simpledrm_driver = { |
| DRM_GEM_SHMEM_DRIVER_OPS, |
| .name = DRIVER_NAME, |
| .desc = DRIVER_DESC, |
| .date = DRIVER_DATE, |
| .major = DRIVER_MAJOR, |
| .minor = DRIVER_MINOR, |
| .driver_features = DRIVER_ATOMIC | DRIVER_GEM | DRIVER_MODESET, |
| .fops = &simpledrm_fops, |
| }; |
| |
| /* |
| * Platform driver |
| */ |
| |
| static int simpledrm_probe(struct platform_device *pdev) |
| { |
| struct simpledrm_device *sdev; |
| struct drm_device *dev; |
| unsigned int color_mode; |
| int ret; |
| |
| sdev = simpledrm_device_create(&simpledrm_driver, pdev); |
| if (IS_ERR(sdev)) |
| return PTR_ERR(sdev); |
| dev = &sdev->dev; |
| |
| ret = drm_dev_register(dev, 0); |
| if (ret) |
| return ret; |
| |
| color_mode = drm_format_info_bpp(sdev->format, 0); |
| if (color_mode == 16) |
| color_mode = sdev->format->depth; // can be 15 or 16 |
| |
| drm_fbdev_generic_setup(dev, color_mode); |
| |
| return 0; |
| } |
| |
| static int simpledrm_remove(struct platform_device *pdev) |
| { |
| struct simpledrm_device *sdev = platform_get_drvdata(pdev); |
| struct drm_device *dev = &sdev->dev; |
| |
| drm_dev_unplug(dev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id simpledrm_of_match_table[] = { |
| { .compatible = "simple-framebuffer", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, simpledrm_of_match_table); |
| |
| static struct platform_driver simpledrm_platform_driver = { |
| .driver = { |
| .name = "simple-framebuffer", /* connect to sysfb */ |
| .of_match_table = simpledrm_of_match_table, |
| }, |
| .probe = simpledrm_probe, |
| .remove = simpledrm_remove, |
| }; |
| |
| module_platform_driver(simpledrm_platform_driver); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL v2"); |