| /* SPDX-License-Identifier: GPL-2.0 */ |
| #undef TRACE_SYSTEM |
| #define TRACE_SYSTEM rcu |
| |
| #if !defined(_TRACE_RCU_H) || defined(TRACE_HEADER_MULTI_READ) |
| #define _TRACE_RCU_H |
| |
| #include <linux/tracepoint.h> |
| |
| #ifdef CONFIG_RCU_TRACE |
| #define TRACE_EVENT_RCU TRACE_EVENT |
| #else |
| #define TRACE_EVENT_RCU TRACE_EVENT_NOP |
| #endif |
| |
| /* |
| * Tracepoint for start/end markers used for utilization calculations. |
| * By convention, the string is of the following forms: |
| * |
| * "Start <activity>" -- Mark the start of the specified activity, |
| * such as "context switch". Nesting is permitted. |
| * "End <activity>" -- Mark the end of the specified activity. |
| * |
| * An "@" character within "<activity>" is a comment character: Data |
| * reduction scripts will ignore the "@" and the remainder of the line. |
| */ |
| TRACE_EVENT(rcu_utilization, |
| |
| TP_PROTO(const char *s), |
| |
| TP_ARGS(s), |
| |
| TP_STRUCT__entry( |
| __field(const char *, s) |
| ), |
| |
| TP_fast_assign( |
| __entry->s = s; |
| ), |
| |
| TP_printk("%s", __entry->s) |
| ); |
| |
| #if defined(CONFIG_TREE_RCU) |
| |
| /* |
| * Tracepoint for grace-period events. Takes a string identifying the |
| * RCU flavor, the grace-period number, and a string identifying the |
| * grace-period-related event as follows: |
| * |
| * "AccReadyCB": CPU acclerates new callbacks to RCU_NEXT_READY_TAIL. |
| * "AccWaitCB": CPU accelerates new callbacks to RCU_WAIT_TAIL. |
| * "newreq": Request a new grace period. |
| * "start": Start a grace period. |
| * "cpustart": CPU first notices a grace-period start. |
| * "cpuqs": CPU passes through a quiescent state. |
| * "cpuonl": CPU comes online. |
| * "cpuofl": CPU goes offline. |
| * "cpuofl-bgp": CPU goes offline while blocking a grace period. |
| * "reqwait": GP kthread sleeps waiting for grace-period request. |
| * "reqwaitsig": GP kthread awakened by signal from reqwait state. |
| * "fqswait": GP kthread waiting until time to force quiescent states. |
| * "fqsstart": GP kthread starts forcing quiescent states. |
| * "fqsend": GP kthread done forcing quiescent states. |
| * "fqswaitsig": GP kthread awakened by signal from fqswait state. |
| * "end": End a grace period. |
| * "cpuend": CPU first notices a grace-period end. |
| */ |
| TRACE_EVENT_RCU(rcu_grace_period, |
| |
| TP_PROTO(const char *rcuname, unsigned long gp_seq, const char *gpevent), |
| |
| TP_ARGS(rcuname, gp_seq, gpevent), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(long, gp_seq) |
| __field(const char *, gpevent) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->gp_seq = (long)gp_seq; |
| __entry->gpevent = gpevent; |
| ), |
| |
| TP_printk("%s %ld %s", |
| __entry->rcuname, __entry->gp_seq, __entry->gpevent) |
| ); |
| |
| /* |
| * Tracepoint for future grace-period events. The caller should pull |
| * the data from the rcu_node structure, other than rcuname, which comes |
| * from the rcu_state structure, and event, which is one of the following: |
| * |
| * "Cleanup": Clean up rcu_node structure after previous GP. |
| * "CleanupMore": Clean up, and another GP is needed. |
| * "EndWait": Complete wait. |
| * "NoGPkthread": The RCU grace-period kthread has not yet started. |
| * "Prestarted": Someone beat us to the request |
| * "Startedleaf": Leaf node marked for future GP. |
| * "Startedleafroot": All nodes from leaf to root marked for future GP. |
| * "Startedroot": Requested a nocb grace period based on root-node data. |
| * "Startleaf": Request a grace period based on leaf-node data. |
| * "StartWait": Start waiting for the requested grace period. |
| */ |
| TRACE_EVENT_RCU(rcu_future_grace_period, |
| |
| TP_PROTO(const char *rcuname, unsigned long gp_seq, |
| unsigned long gp_seq_req, u8 level, int grplo, int grphi, |
| const char *gpevent), |
| |
| TP_ARGS(rcuname, gp_seq, gp_seq_req, level, grplo, grphi, gpevent), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(long, gp_seq) |
| __field(long, gp_seq_req) |
| __field(u8, level) |
| __field(int, grplo) |
| __field(int, grphi) |
| __field(const char *, gpevent) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->gp_seq = (long)gp_seq; |
| __entry->gp_seq_req = (long)gp_seq_req; |
| __entry->level = level; |
| __entry->grplo = grplo; |
| __entry->grphi = grphi; |
| __entry->gpevent = gpevent; |
| ), |
| |
| TP_printk("%s %ld %ld %u %d %d %s", |
| __entry->rcuname, (long)__entry->gp_seq, (long)__entry->gp_seq_req, __entry->level, |
| __entry->grplo, __entry->grphi, __entry->gpevent) |
| ); |
| |
| /* |
| * Tracepoint for grace-period-initialization events. These are |
| * distinguished by the type of RCU, the new grace-period number, the |
| * rcu_node structure level, the starting and ending CPU covered by the |
| * rcu_node structure, and the mask of CPUs that will be waited for. |
| * All but the type of RCU are extracted from the rcu_node structure. |
| */ |
| TRACE_EVENT_RCU(rcu_grace_period_init, |
| |
| TP_PROTO(const char *rcuname, unsigned long gp_seq, u8 level, |
| int grplo, int grphi, unsigned long qsmask), |
| |
| TP_ARGS(rcuname, gp_seq, level, grplo, grphi, qsmask), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(long, gp_seq) |
| __field(u8, level) |
| __field(int, grplo) |
| __field(int, grphi) |
| __field(unsigned long, qsmask) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->gp_seq = (long)gp_seq; |
| __entry->level = level; |
| __entry->grplo = grplo; |
| __entry->grphi = grphi; |
| __entry->qsmask = qsmask; |
| ), |
| |
| TP_printk("%s %ld %u %d %d %lx", |
| __entry->rcuname, __entry->gp_seq, __entry->level, |
| __entry->grplo, __entry->grphi, __entry->qsmask) |
| ); |
| |
| /* |
| * Tracepoint for expedited grace-period events. Takes a string identifying |
| * the RCU flavor, the expedited grace-period sequence number, and a string |
| * identifying the grace-period-related event as follows: |
| * |
| * "snap": Captured snapshot of expedited grace period sequence number. |
| * "start": Started a real expedited grace period. |
| * "reset": Started resetting the tree |
| * "select": Started selecting the CPUs to wait on. |
| * "selectofl": Selected CPU partially offline. |
| * "startwait": Started waiting on selected CPUs. |
| * "end": Ended a real expedited grace period. |
| * "endwake": Woke piggybackers up. |
| * "done": Someone else did the expedited grace period for us. |
| */ |
| TRACE_EVENT_RCU(rcu_exp_grace_period, |
| |
| TP_PROTO(const char *rcuname, unsigned long gpseq, const char *gpevent), |
| |
| TP_ARGS(rcuname, gpseq, gpevent), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(long, gpseq) |
| __field(const char *, gpevent) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->gpseq = (long)gpseq; |
| __entry->gpevent = gpevent; |
| ), |
| |
| TP_printk("%s %ld %s", |
| __entry->rcuname, __entry->gpseq, __entry->gpevent) |
| ); |
| |
| /* |
| * Tracepoint for expedited grace-period funnel-locking events. Takes a |
| * string identifying the RCU flavor, an integer identifying the rcu_node |
| * combining-tree level, another pair of integers identifying the lowest- |
| * and highest-numbered CPU associated with the current rcu_node structure, |
| * and a string. identifying the grace-period-related event as follows: |
| * |
| * "nxtlvl": Advance to next level of rcu_node funnel |
| * "wait": Wait for someone else to do expedited GP |
| */ |
| TRACE_EVENT_RCU(rcu_exp_funnel_lock, |
| |
| TP_PROTO(const char *rcuname, u8 level, int grplo, int grphi, |
| const char *gpevent), |
| |
| TP_ARGS(rcuname, level, grplo, grphi, gpevent), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(u8, level) |
| __field(int, grplo) |
| __field(int, grphi) |
| __field(const char *, gpevent) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->level = level; |
| __entry->grplo = grplo; |
| __entry->grphi = grphi; |
| __entry->gpevent = gpevent; |
| ), |
| |
| TP_printk("%s %d %d %d %s", |
| __entry->rcuname, __entry->level, __entry->grplo, |
| __entry->grphi, __entry->gpevent) |
| ); |
| |
| #ifdef CONFIG_RCU_NOCB_CPU |
| /* |
| * Tracepoint for RCU no-CBs CPU callback handoffs. This event is intended |
| * to assist debugging of these handoffs. |
| * |
| * The first argument is the name of the RCU flavor, and the second is |
| * the number of the offloaded CPU are extracted. The third and final |
| * argument is a string as follows: |
| * |
| * "AlreadyAwake": The to-be-awakened rcuo kthread is already awake. |
| * "Bypass": rcuo GP kthread sees non-empty ->nocb_bypass. |
| * "CBSleep": rcuo CB kthread sleeping waiting for CBs. |
| * "Check": rcuo GP kthread checking specified CPU for work. |
| * "DeferredWake": Timer expired or polled check, time to wake. |
| * "DoWake": The to-be-awakened rcuo kthread needs to be awakened. |
| * "EndSleep": Done waiting for GP for !rcu_nocb_poll. |
| * "FirstBQ": New CB to empty ->nocb_bypass (->cblist maybe non-empty). |
| * "FirstBQnoWake": FirstBQ plus rcuo kthread need not be awakened. |
| * "FirstBQwake": FirstBQ plus rcuo kthread must be awakened. |
| * "FirstQ": New CB to empty ->cblist (->nocb_bypass maybe non-empty). |
| * "NeedWaitGP": rcuo GP kthread must wait on a grace period. |
| * "Poll": Start of new polling cycle for rcu_nocb_poll. |
| * "Sleep": Sleep waiting for GP for !rcu_nocb_poll. |
| * "Timer": Deferred-wake timer expired. |
| * "WakeEmptyIsDeferred": Wake rcuo kthread later, first CB to empty list. |
| * "WakeEmpty": Wake rcuo kthread, first CB to empty list. |
| * "WakeNot": Don't wake rcuo kthread. |
| * "WakeNotPoll": Don't wake rcuo kthread because it is polling. |
| * "WakeOvfIsDeferred": Wake rcuo kthread later, CB list is huge. |
| * "WokeEmpty": rcuo CB kthread woke to find empty list. |
| */ |
| TRACE_EVENT_RCU(rcu_nocb_wake, |
| |
| TP_PROTO(const char *rcuname, int cpu, const char *reason), |
| |
| TP_ARGS(rcuname, cpu, reason), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(int, cpu) |
| __field(const char *, reason) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->cpu = cpu; |
| __entry->reason = reason; |
| ), |
| |
| TP_printk("%s %d %s", __entry->rcuname, __entry->cpu, __entry->reason) |
| ); |
| #endif |
| |
| /* |
| * Tracepoint for tasks blocking within preemptible-RCU read-side |
| * critical sections. Track the type of RCU (which one day might |
| * include SRCU), the grace-period number that the task is blocking |
| * (the current or the next), and the task's PID. |
| */ |
| TRACE_EVENT_RCU(rcu_preempt_task, |
| |
| TP_PROTO(const char *rcuname, int pid, unsigned long gp_seq), |
| |
| TP_ARGS(rcuname, pid, gp_seq), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(long, gp_seq) |
| __field(int, pid) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->gp_seq = (long)gp_seq; |
| __entry->pid = pid; |
| ), |
| |
| TP_printk("%s %ld %d", |
| __entry->rcuname, __entry->gp_seq, __entry->pid) |
| ); |
| |
| /* |
| * Tracepoint for tasks that blocked within a given preemptible-RCU |
| * read-side critical section exiting that critical section. Track the |
| * type of RCU (which one day might include SRCU) and the task's PID. |
| */ |
| TRACE_EVENT_RCU(rcu_unlock_preempted_task, |
| |
| TP_PROTO(const char *rcuname, unsigned long gp_seq, int pid), |
| |
| TP_ARGS(rcuname, gp_seq, pid), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(long, gp_seq) |
| __field(int, pid) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->gp_seq = (long)gp_seq; |
| __entry->pid = pid; |
| ), |
| |
| TP_printk("%s %ld %d", __entry->rcuname, __entry->gp_seq, __entry->pid) |
| ); |
| |
| /* |
| * Tracepoint for quiescent-state-reporting events. These are |
| * distinguished by the type of RCU, the grace-period number, the |
| * mask of quiescent lower-level entities, the rcu_node structure level, |
| * the starting and ending CPU covered by the rcu_node structure, and |
| * whether there are any blocked tasks blocking the current grace period. |
| * All but the type of RCU are extracted from the rcu_node structure. |
| */ |
| TRACE_EVENT_RCU(rcu_quiescent_state_report, |
| |
| TP_PROTO(const char *rcuname, unsigned long gp_seq, |
| unsigned long mask, unsigned long qsmask, |
| u8 level, int grplo, int grphi, int gp_tasks), |
| |
| TP_ARGS(rcuname, gp_seq, mask, qsmask, level, grplo, grphi, gp_tasks), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(long, gp_seq) |
| __field(unsigned long, mask) |
| __field(unsigned long, qsmask) |
| __field(u8, level) |
| __field(int, grplo) |
| __field(int, grphi) |
| __field(u8, gp_tasks) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->gp_seq = (long)gp_seq; |
| __entry->mask = mask; |
| __entry->qsmask = qsmask; |
| __entry->level = level; |
| __entry->grplo = grplo; |
| __entry->grphi = grphi; |
| __entry->gp_tasks = gp_tasks; |
| ), |
| |
| TP_printk("%s %ld %lx>%lx %u %d %d %u", |
| __entry->rcuname, __entry->gp_seq, |
| __entry->mask, __entry->qsmask, __entry->level, |
| __entry->grplo, __entry->grphi, __entry->gp_tasks) |
| ); |
| |
| /* |
| * Tracepoint for quiescent states detected by force_quiescent_state(). |
| * These trace events include the type of RCU, the grace-period number |
| * that was blocked by the CPU, the CPU itself, and the type of quiescent |
| * state, which can be "dti" for dyntick-idle mode or "kick" when kicking |
| * a CPU that has been in dyntick-idle mode for too long. |
| */ |
| TRACE_EVENT_RCU(rcu_fqs, |
| |
| TP_PROTO(const char *rcuname, unsigned long gp_seq, int cpu, const char *qsevent), |
| |
| TP_ARGS(rcuname, gp_seq, cpu, qsevent), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(long, gp_seq) |
| __field(int, cpu) |
| __field(const char *, qsevent) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->gp_seq = (long)gp_seq; |
| __entry->cpu = cpu; |
| __entry->qsevent = qsevent; |
| ), |
| |
| TP_printk("%s %ld %d %s", |
| __entry->rcuname, __entry->gp_seq, |
| __entry->cpu, __entry->qsevent) |
| ); |
| |
| #endif /* #if defined(CONFIG_TREE_RCU) */ |
| |
| /* |
| * Tracepoint for dyntick-idle entry/exit events. These take 2 strings |
| * as argument: |
| * polarity: "Start", "End", "StillNonIdle" for entering, exiting or still not |
| * being in dyntick-idle mode. |
| * context: "USER" or "IDLE" or "IRQ". |
| * NMIs nested in IRQs are inferred with dynticks_nesting > 1 in IRQ context. |
| * |
| * These events also take a pair of numbers, which indicate the nesting |
| * depth before and after the event of interest, and a third number that is |
| * the ->dynticks counter. Note that task-related and interrupt-related |
| * events use two separate counters, and that the "++=" and "--=" events |
| * for irq/NMI will change the counter by two, otherwise by one. |
| */ |
| TRACE_EVENT_RCU(rcu_dyntick, |
| |
| TP_PROTO(const char *polarity, long oldnesting, long newnesting, int dynticks), |
| |
| TP_ARGS(polarity, oldnesting, newnesting, dynticks), |
| |
| TP_STRUCT__entry( |
| __field(const char *, polarity) |
| __field(long, oldnesting) |
| __field(long, newnesting) |
| __field(int, dynticks) |
| ), |
| |
| TP_fast_assign( |
| __entry->polarity = polarity; |
| __entry->oldnesting = oldnesting; |
| __entry->newnesting = newnesting; |
| __entry->dynticks = dynticks; |
| ), |
| |
| TP_printk("%s %lx %lx %#3x", __entry->polarity, |
| __entry->oldnesting, __entry->newnesting, |
| __entry->dynticks & 0xfff) |
| ); |
| |
| /* |
| * Tracepoint for the registration of a single RCU callback function. |
| * The first argument is the type of RCU, the second argument is |
| * a pointer to the RCU callback itself, the third element is the |
| * number of lazy callbacks queued, and the fourth element is the |
| * total number of callbacks queued. |
| */ |
| TRACE_EVENT_RCU(rcu_callback, |
| |
| TP_PROTO(const char *rcuname, struct rcu_head *rhp, long qlen), |
| |
| TP_ARGS(rcuname, rhp, qlen), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(void *, rhp) |
| __field(void *, func) |
| __field(long, qlen) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->rhp = rhp; |
| __entry->func = rhp->func; |
| __entry->qlen = qlen; |
| ), |
| |
| TP_printk("%s rhp=%p func=%ps %ld", |
| __entry->rcuname, __entry->rhp, __entry->func, |
| __entry->qlen) |
| ); |
| |
| TRACE_EVENT_RCU(rcu_segcb_stats, |
| |
| TP_PROTO(struct rcu_segcblist *rs, const char *ctx), |
| |
| TP_ARGS(rs, ctx), |
| |
| TP_STRUCT__entry( |
| __field(const char *, ctx) |
| __array(unsigned long, gp_seq, RCU_CBLIST_NSEGS) |
| __array(long, seglen, RCU_CBLIST_NSEGS) |
| ), |
| |
| TP_fast_assign( |
| __entry->ctx = ctx; |
| memcpy(__entry->seglen, rs->seglen, RCU_CBLIST_NSEGS * sizeof(long)); |
| memcpy(__entry->gp_seq, rs->gp_seq, RCU_CBLIST_NSEGS * sizeof(unsigned long)); |
| |
| ), |
| |
| TP_printk("%s seglen: (DONE=%ld, WAIT=%ld, NEXT_READY=%ld, NEXT=%ld) " |
| "gp_seq: (DONE=%lu, WAIT=%lu, NEXT_READY=%lu, NEXT=%lu)", __entry->ctx, |
| __entry->seglen[0], __entry->seglen[1], __entry->seglen[2], __entry->seglen[3], |
| __entry->gp_seq[0], __entry->gp_seq[1], __entry->gp_seq[2], __entry->gp_seq[3]) |
| |
| ); |
| |
| /* |
| * Tracepoint for the registration of a single RCU callback of the special |
| * kvfree() form. The first argument is the RCU type, the second argument |
| * is a pointer to the RCU callback, the third argument is the offset |
| * of the callback within the enclosing RCU-protected data structure, |
| * the fourth argument is the number of lazy callbacks queued, and the |
| * fifth argument is the total number of callbacks queued. |
| */ |
| TRACE_EVENT_RCU(rcu_kvfree_callback, |
| |
| TP_PROTO(const char *rcuname, struct rcu_head *rhp, unsigned long offset, |
| long qlen), |
| |
| TP_ARGS(rcuname, rhp, offset, qlen), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(void *, rhp) |
| __field(unsigned long, offset) |
| __field(long, qlen) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->rhp = rhp; |
| __entry->offset = offset; |
| __entry->qlen = qlen; |
| ), |
| |
| TP_printk("%s rhp=%p func=%ld %ld", |
| __entry->rcuname, __entry->rhp, __entry->offset, |
| __entry->qlen) |
| ); |
| |
| /* |
| * Tracepoint for marking the beginning rcu_do_batch, performed to start |
| * RCU callback invocation. The first argument is the RCU flavor, |
| * the second is the number of lazy callbacks queued, the third is |
| * the total number of callbacks queued, and the fourth argument is |
| * the current RCU-callback batch limit. |
| */ |
| TRACE_EVENT_RCU(rcu_batch_start, |
| |
| TP_PROTO(const char *rcuname, long qlen, long blimit), |
| |
| TP_ARGS(rcuname, qlen, blimit), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(long, qlen) |
| __field(long, blimit) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->qlen = qlen; |
| __entry->blimit = blimit; |
| ), |
| |
| TP_printk("%s CBs=%ld bl=%ld", |
| __entry->rcuname, __entry->qlen, __entry->blimit) |
| ); |
| |
| /* |
| * Tracepoint for the invocation of a single RCU callback function. |
| * The first argument is the type of RCU, and the second argument is |
| * a pointer to the RCU callback itself. |
| */ |
| TRACE_EVENT_RCU(rcu_invoke_callback, |
| |
| TP_PROTO(const char *rcuname, struct rcu_head *rhp), |
| |
| TP_ARGS(rcuname, rhp), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(void *, rhp) |
| __field(void *, func) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->rhp = rhp; |
| __entry->func = rhp->func; |
| ), |
| |
| TP_printk("%s rhp=%p func=%ps", |
| __entry->rcuname, __entry->rhp, __entry->func) |
| ); |
| |
| /* |
| * Tracepoint for the invocation of a single RCU callback of the special |
| * kvfree() form. The first argument is the RCU flavor, the second |
| * argument is a pointer to the RCU callback, and the third argument |
| * is the offset of the callback within the enclosing RCU-protected |
| * data structure. |
| */ |
| TRACE_EVENT_RCU(rcu_invoke_kvfree_callback, |
| |
| TP_PROTO(const char *rcuname, struct rcu_head *rhp, unsigned long offset), |
| |
| TP_ARGS(rcuname, rhp, offset), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(void *, rhp) |
| __field(unsigned long, offset) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->rhp = rhp; |
| __entry->offset = offset; |
| ), |
| |
| TP_printk("%s rhp=%p func=%ld", |
| __entry->rcuname, __entry->rhp, __entry->offset) |
| ); |
| |
| /* |
| * Tracepoint for the invocation of a single RCU callback of the special |
| * kfree_bulk() form. The first argument is the RCU flavor, the second |
| * argument is a number of elements in array to free, the third is an |
| * address of the array holding nr_records entries. |
| */ |
| TRACE_EVENT_RCU(rcu_invoke_kfree_bulk_callback, |
| |
| TP_PROTO(const char *rcuname, unsigned long nr_records, void **p), |
| |
| TP_ARGS(rcuname, nr_records, p), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(unsigned long, nr_records) |
| __field(void **, p) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->nr_records = nr_records; |
| __entry->p = p; |
| ), |
| |
| TP_printk("%s bulk=0x%p nr_records=%lu", |
| __entry->rcuname, __entry->p, __entry->nr_records) |
| ); |
| |
| /* |
| * Tracepoint for exiting rcu_do_batch after RCU callbacks have been |
| * invoked. The first argument is the name of the RCU flavor, |
| * the second argument is number of callbacks actually invoked, |
| * the third argument (cb) is whether or not any of the callbacks that |
| * were ready to invoke at the beginning of this batch are still |
| * queued, the fourth argument (nr) is the return value of need_resched(), |
| * the fifth argument (iit) is 1 if the current task is the idle task, |
| * and the sixth argument (risk) is the return value from |
| * rcu_is_callbacks_kthread(). |
| */ |
| TRACE_EVENT_RCU(rcu_batch_end, |
| |
| TP_PROTO(const char *rcuname, int callbacks_invoked, |
| char cb, char nr, char iit, char risk), |
| |
| TP_ARGS(rcuname, callbacks_invoked, cb, nr, iit, risk), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(int, callbacks_invoked) |
| __field(char, cb) |
| __field(char, nr) |
| __field(char, iit) |
| __field(char, risk) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->callbacks_invoked = callbacks_invoked; |
| __entry->cb = cb; |
| __entry->nr = nr; |
| __entry->iit = iit; |
| __entry->risk = risk; |
| ), |
| |
| TP_printk("%s CBs-invoked=%d idle=%c%c%c%c", |
| __entry->rcuname, __entry->callbacks_invoked, |
| __entry->cb ? 'C' : '.', |
| __entry->nr ? 'S' : '.', |
| __entry->iit ? 'I' : '.', |
| __entry->risk ? 'R' : '.') |
| ); |
| |
| /* |
| * Tracepoint for rcutorture readers. The first argument is the name |
| * of the RCU flavor from rcutorture's viewpoint and the second argument |
| * is the callback address. The third argument is the start time in |
| * seconds, and the last two arguments are the grace period numbers |
| * at the beginning and end of the read, respectively. Note that the |
| * callback address can be NULL. |
| */ |
| #define RCUTORTURENAME_LEN 8 |
| TRACE_EVENT_RCU(rcu_torture_read, |
| |
| TP_PROTO(const char *rcutorturename, struct rcu_head *rhp, |
| unsigned long secs, unsigned long c_old, unsigned long c), |
| |
| TP_ARGS(rcutorturename, rhp, secs, c_old, c), |
| |
| TP_STRUCT__entry( |
| __field(char, rcutorturename[RCUTORTURENAME_LEN]) |
| __field(struct rcu_head *, rhp) |
| __field(unsigned long, secs) |
| __field(unsigned long, c_old) |
| __field(unsigned long, c) |
| ), |
| |
| TP_fast_assign( |
| strncpy(__entry->rcutorturename, rcutorturename, |
| RCUTORTURENAME_LEN); |
| __entry->rcutorturename[RCUTORTURENAME_LEN - 1] = 0; |
| __entry->rhp = rhp; |
| __entry->secs = secs; |
| __entry->c_old = c_old; |
| __entry->c = c; |
| ), |
| |
| TP_printk("%s torture read %p %luus c: %lu %lu", |
| __entry->rcutorturename, __entry->rhp, |
| __entry->secs, __entry->c_old, __entry->c) |
| ); |
| |
| /* |
| * Tracepoint for rcu_barrier() execution. The string "s" describes |
| * the rcu_barrier phase: |
| * "Begin": rcu_barrier() started. |
| * "EarlyExit": rcu_barrier() piggybacked, thus early exit. |
| * "Inc1": rcu_barrier() piggyback check counter incremented. |
| * "OfflineNoCBQ": rcu_barrier() found offline no-CBs CPU with callbacks. |
| * "OnlineQ": rcu_barrier() found online CPU with callbacks. |
| * "OnlineNQ": rcu_barrier() found online CPU, no callbacks. |
| * "IRQ": An rcu_barrier_callback() callback posted on remote CPU. |
| * "IRQNQ": An rcu_barrier_callback() callback found no callbacks. |
| * "CB": An rcu_barrier_callback() invoked a callback, not the last. |
| * "LastCB": An rcu_barrier_callback() invoked the last callback. |
| * "Inc2": rcu_barrier() piggyback check counter incremented. |
| * The "cpu" argument is the CPU or -1 if meaningless, the "cnt" argument |
| * is the count of remaining callbacks, and "done" is the piggybacking count. |
| */ |
| TRACE_EVENT_RCU(rcu_barrier, |
| |
| TP_PROTO(const char *rcuname, const char *s, int cpu, int cnt, unsigned long done), |
| |
| TP_ARGS(rcuname, s, cpu, cnt, done), |
| |
| TP_STRUCT__entry( |
| __field(const char *, rcuname) |
| __field(const char *, s) |
| __field(int, cpu) |
| __field(int, cnt) |
| __field(unsigned long, done) |
| ), |
| |
| TP_fast_assign( |
| __entry->rcuname = rcuname; |
| __entry->s = s; |
| __entry->cpu = cpu; |
| __entry->cnt = cnt; |
| __entry->done = done; |
| ), |
| |
| TP_printk("%s %s cpu %d remaining %d # %lu", |
| __entry->rcuname, __entry->s, __entry->cpu, __entry->cnt, |
| __entry->done) |
| ); |
| |
| #endif /* _TRACE_RCU_H */ |
| |
| /* This part must be outside protection */ |
| #include <trace/define_trace.h> |