drivers/gpu/drm/i915/i915_params.c - linux - Git at Google

 /*
  * Copyright © 2014 Intel Corporation
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
  * copy of this software and associated documentation files (the
  * "Software"), to deal in the Software without restriction, including
  * without limitation the rights to use, copy, modify, merge, publish,
  * distribute, sub license, and/or sell copies of the Software, and to
  * permit persons to whom the Software is furnished to do so, subject to
  * the following conditions:
  *
  * The above copyright notice and this permission notice (including the
  * next paragraph) shall be included in all copies or substantial portions
  * of the Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
  * IN THE SOFTWARE.
  */

 #include <drm/drm_print.h>

 #include "i915_params.h"
 #include "i915_drv.h"

 #define i915_param_named(name, T, perm, desc) \
 	module_param_named(name, i915_modparams.name, T, perm); \
 	MODULE_PARM_DESC(name, desc)
 #define i915_param_named_unsafe(name, T, perm, desc) \
 	module_param_named_unsafe(name, i915_modparams.name, T, perm); \
 	MODULE_PARM_DESC(name, desc)

 struct i915_params i915_modparams __read_mostly = {
 #define MEMBER(T, member, value, ...) .member = (value),
 	I915_PARAMS_FOR_EACH(MEMBER)
 #undef MEMBER
 };

 /*
  * Note: As a rule, keep module parameter sysfs permissions read-only
  * 0400. Runtime changes are only supported through i915 debugfs.
  *
  * For any exceptions requiring write access and runtime changes through module
  * parameter sysfs, prevent debugfs file creation by setting the parameter's
  * debugfs mode to 0.
  */

 i915_param_named(modeset, int, 0400,
 	"Use kernel modesetting [KMS] (0=disable, "
 	"1=on, -1=force vga console preference [default])");

 i915_param_named_unsafe(enable_dc, int, 0400,
 	"Enable power-saving display C-states. "
 	"(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6; "
 	"3=up to DC5 with DC3CO; 4=up to DC6 with DC3CO)");

 i915_param_named_unsafe(enable_fbc, int, 0400,
 	"Enable frame buffer compression for power savings "
 	"(default: -1 (use per-chip default))");

 i915_param_named_unsafe(lvds_channel_mode, int, 0400,
 	 "Specify LVDS channel mode "
 	 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");

 i915_param_named_unsafe(panel_use_ssc, int, 0400,
 	"Use Spread Spectrum Clock with panels [LVDS/eDP] "
 	"(default: auto from VBT)");

 i915_param_named_unsafe(vbt_sdvo_panel_type, int, 0400,
 	"Override/Ignore selection of SDVO panel mode in the VBT "
 	"(-2=ignore, -1=auto [default], index in VBT BIOS table)");

 i915_param_named_unsafe(reset, uint, 0400,
 	"Attempt GPU resets (0=disabled, 1=full gpu reset, 2=engine reset [default])");

 i915_param_named_unsafe(vbt_firmware, charp, 0400,
 	"Load VBT from specified file under /lib/firmware");

 #if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR)
 i915_param_named(error_capture, bool, 0400,
 	"Record the GPU state following a hang. "
 	"This information in /sys/class/drm/card<N>/error is vital for "
 	"triaging and debugging hangs.");
 #endif

 i915_param_named_unsafe(enable_hangcheck, bool, 0400,
 	"Periodically check GPU activity for detecting hangs. "
 	"WARNING: Disabling this can cause system wide hangs. "
 	"(default: true)");

 i915_param_named_unsafe(enable_psr, int, 0400,
 	"Enable PSR "
 	"(0=disabled, 1=enabled) "
 	"Default: -1 (use per-chip default)");

 i915_param_named(psr_safest_params, bool, 0400,
 	"Replace PSR VBT parameters by the safest and not optimal ones. This "
 	"is helpful to detect if PSR issues are related to bad values set in "
 	" VBT. (0=use VBT parameters, 1=use safest parameters)");

 i915_param_named_unsafe(enable_psr2_sel_fetch, bool, 0400,
 	"Enable PSR2 selective fetch "
 	"(0=disabled, 1=enabled) "
 	"Default: 0");

 i915_param_named_unsafe(force_probe, charp, 0400,
 	"Force probe the driver for specified devices. "
 	"See CONFIG_DRM_I915_FORCE_PROBE for details.");

 i915_param_named_unsafe(disable_power_well, int, 0400,
 	"Disable display power wells when possible "
 	"(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");

 i915_param_named_unsafe(enable_ips, int, 0400, "Enable IPS (default: true)");

 i915_param_named(fastboot, int, 0400,
 	"Try to skip unnecessary mode sets at boot time "
 	"(0=disabled, 1=enabled) "
 	"Default: -1 (use per-chip default)");

 i915_param_named_unsafe(load_detect_test, bool, 0400,
 	"Force-enable the VGA load detect code for testing (default:false). "
 	"For developers only.");

 i915_param_named_unsafe(force_reset_modeset_test, bool, 0400,
 	"Force a modeset during gpu reset for testing (default:false). "
 	"For developers only.");

 i915_param_named_unsafe(invert_brightness, int, 0400,
 	"Invert backlight brightness "
 	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
 	"report PCI device ID, subsystem vendor and subsystem device ID "
 	"to dri-devel@lists.freedesktop.org, if your machine needs it. "
 	"It will then be included in an upcoming module version.");

 i915_param_named(disable_display, bool, 0400,
 	"Disable display (default: false)");

 i915_param_named(mmio_debug, int, 0400,
 	"Enable the MMIO debug code for the first N failures (default: off). "
 	"This may negatively affect performance.");

 /* Special case writable file */
 i915_param_named(verbose_state_checks, bool, 0600,
 	"Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");

 i915_param_named_unsafe(nuclear_pageflip, bool, 0400,
 	"Force enable atomic functionality on platforms that don't have full support yet.");

 /* WA to get away with the default setting in VBT for early platforms.Will be removed */
 i915_param_named_unsafe(edp_vswing, int, 0400,
 	"Ignore/Override vswing pre-emph table selection from VBT "
 	"(0=use value from vbt [default], 1=low power swing(200mV),"
 	"2=default swing(400mV))");

 i915_param_named_unsafe(enable_guc, int, 0400,
 	"Enable GuC load for GuC submission and/or HuC load. "
 	"Required functionality can be selected using bitmask values. "
 	"(-1=auto [default], 0=disable, 1=GuC submission, 2=HuC load)");

 i915_param_named(guc_log_level, int, 0400,
 	"GuC firmware logging level. Requires GuC to be loaded. "
 	"(-1=auto [default], 0=disable, 1..4=enable with verbosity min..max)");

 i915_param_named_unsafe(guc_firmware_path, charp, 0400,
 	"GuC firmware path to use instead of the default one");

 i915_param_named_unsafe(huc_firmware_path, charp, 0400,
 	"HuC firmware path to use instead of the default one");

 i915_param_named_unsafe(dmc_firmware_path, charp, 0400,
 	"DMC firmware path to use instead of the default one");

 i915_param_named_unsafe(enable_dp_mst, bool, 0400,
 	"Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)");

 #if IS_ENABLED(CONFIG_DRM_I915_DEBUG)
 i915_param_named_unsafe(inject_probe_failure, uint, 0400,
 	"Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
 #endif

 i915_param_named(enable_dpcd_backlight, int, 0400,
 	"Enable support for DPCD backlight control"
 	"(-1=use per-VBT LFP backlight type setting [default], 0=disabled, 1=enable, 2=force VESA interface, 3=force Intel interface)");

 #if IS_ENABLED(CONFIG_DRM_I915_GVT)
 i915_param_named(enable_gvt, bool, 0400,
 	"Enable support for Intel GVT-g graphics virtualization host support(default:false)");
 #endif

 #if IS_ENABLED(CONFIG_DRM_I915_UNSTABLE_FAKE_LMEM)
 i915_param_named_unsafe(fake_lmem_start, ulong, 0400,
 	"Fake LMEM start offset (default: 0)");
 #endif

 #if CONFIG_DRM_I915_REQUEST_TIMEOUT
 i915_param_named_unsafe(request_timeout_ms, uint, 0600,
 			"Default request/fence/batch buffer expiration timeout.");
 #endif

 static __always_inline void _print_param(struct drm_printer *p,
 					 const char *name,
 					 const char *type,
 					 const void *x)
 {
 	if (!__builtin_strcmp(type, "bool"))
 		drm_printf(p, "i915.%s=%s\n", name, yesno(*(const bool *)x));
 	else if (!__builtin_strcmp(type, "int"))
 		drm_printf(p, "i915.%s=%d\n", name, *(const int *)x);
 	else if (!__builtin_strcmp(type, "unsigned int"))
 		drm_printf(p, "i915.%s=%u\n", name, *(const unsigned int *)x);
 	else if (!__builtin_strcmp(type, "unsigned long"))
 		drm_printf(p, "i915.%s=%lu\n", name, *(const unsigned long *)x);
 	else if (!__builtin_strcmp(type, "char *"))
 		drm_printf(p, "i915.%s=%s\n", name, *(const char **)x);
 	else
 		WARN_ONCE(1, "no printer defined for param type %s (i915.%s)\n",
 			  type, name);
 }

 /**
  * i915_params_dump - dump i915 modparams
  * @params: i915 modparams
  * @p: the &drm_printer
  *
  * Pretty printer for i915 modparams.
  */
 void i915_params_dump(const struct i915_params *params, struct drm_printer *p)
 {
 #define PRINT(T, x, ...) _print_param(p, #x, #T, &params->x);
 	I915_PARAMS_FOR_EACH(PRINT);
 #undef PRINT
 }

 static __always_inline void dup_param(const char *type, void *x)
 {
 	if (!__builtin_strcmp(type, "char *"))
 		*(void **)x = kstrdup(*(void **)x, GFP_ATOMIC);
 }

 void i915_params_copy(struct i915_params *dest, const struct i915_params *src)
 {
 	*dest = *src;
 #define DUP(T, x, ...) dup_param(#T, &dest->x);
 	I915_PARAMS_FOR_EACH(DUP);
 #undef DUP
 }

 static __always_inline void free_param(const char *type, void *x)
 {
 	if (!__builtin_strcmp(type, "char *")) {
 		kfree(*(void **)x);
 		*(void **)x = NULL;
 	}
 }

 /* free the allocated members, *not* the passed in params itself */
 void i915_params_free(struct i915_params *params)
 {
 #define FREE(T, x, ...) free_param(#T, &params->x);
 	I915_PARAMS_FOR_EACH(FREE);
 #undef FREE
 }
	/*
	* Copyright © 2014 Intel Corporation
	*
	* Permission is hereby granted, free of charge, to any person obtaining a
	* copy of this software and associated documentation files (the
	* "Software"), to deal in the Software without restriction, including
	* without limitation the rights to use, copy, modify, merge, publish,
	* distribute, sub license, and/or sell copies of the Software, and to
	* permit persons to whom the Software is furnished to do so, subject to
	* the following conditions:
	*
	* The above copyright notice and this permission notice (including the
	* next paragraph) shall be included in all copies or substantial portions
	* of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
	* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
	* IN THE SOFTWARE.
	*/

	#include <drm/drm_print.h>

	#include "i915_params.h"
	#include "i915_drv.h"

	#define i915_param_named(name, T, perm, desc) \
	module_param_named(name, i915_modparams.name, T, perm); \
	MODULE_PARM_DESC(name, desc)
	#define i915_param_named_unsafe(name, T, perm, desc) \
	module_param_named_unsafe(name, i915_modparams.name, T, perm); \
	MODULE_PARM_DESC(name, desc)

	struct i915_params i915_modparams __read_mostly = {
	#define MEMBER(T, member, value, ...) .member = (value),
	I915_PARAMS_FOR_EACH(MEMBER)
	#undef MEMBER
	};

	/*
	* Note: As a rule, keep module parameter sysfs permissions read-only
	* 0400. Runtime changes are only supported through i915 debugfs.
	*
	* For any exceptions requiring write access and runtime changes through module
	* parameter sysfs, prevent debugfs file creation by setting the parameter's
	* debugfs mode to 0.
	*/

	i915_param_named(modeset, int, 0400,
	"Use kernel modesetting [KMS] (0=disable, "
	"1=on, -1=force vga console preference [default])");

	i915_param_named_unsafe(enable_dc, int, 0400,
	"Enable power-saving display C-states. "
	"(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6; "
	"3=up to DC5 with DC3CO; 4=up to DC6 with DC3CO)");

	i915_param_named_unsafe(enable_fbc, int, 0400,
	"Enable frame buffer compression for power savings "
	"(default: -1 (use per-chip default))");

	i915_param_named_unsafe(lvds_channel_mode, int, 0400,
	"Specify LVDS channel mode "
	"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");

	i915_param_named_unsafe(panel_use_ssc, int, 0400,
	"Use Spread Spectrum Clock with panels [LVDS/eDP] "
	"(default: auto from VBT)");

	i915_param_named_unsafe(vbt_sdvo_panel_type, int, 0400,
	"Override/Ignore selection of SDVO panel mode in the VBT "
	"(-2=ignore, -1=auto [default], index in VBT BIOS table)");

	i915_param_named_unsafe(reset, uint, 0400,
	"Attempt GPU resets (0=disabled, 1=full gpu reset, 2=engine reset [default])");

	i915_param_named_unsafe(vbt_firmware, charp, 0400,
	"Load VBT from specified file under /lib/firmware");

	#if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR)
	i915_param_named(error_capture, bool, 0400,
	"Record the GPU state following a hang. "
	"This information in /sys/class/drm/card<N>/error is vital for "
	"triaging and debugging hangs.");
	#endif

	i915_param_named_unsafe(enable_hangcheck, bool, 0400,
	"Periodically check GPU activity for detecting hangs. "
	"WARNING: Disabling this can cause system wide hangs. "
	"(default: true)");

	i915_param_named_unsafe(enable_psr, int, 0400,
	"Enable PSR "
	"(0=disabled, 1=enabled) "
	"Default: -1 (use per-chip default)");

	i915_param_named(psr_safest_params, bool, 0400,
	"Replace PSR VBT parameters by the safest and not optimal ones. This "
	"is helpful to detect if PSR issues are related to bad values set in "
	" VBT. (0=use VBT parameters, 1=use safest parameters)");

	i915_param_named_unsafe(enable_psr2_sel_fetch, bool, 0400,
	"Enable PSR2 selective fetch "
	"(0=disabled, 1=enabled) "
	"Default: 0");

	i915_param_named_unsafe(force_probe, charp, 0400,
	"Force probe the driver for specified devices. "
	"See CONFIG_DRM_I915_FORCE_PROBE for details.");

	i915_param_named_unsafe(disable_power_well, int, 0400,
	"Disable display power wells when possible "
	"(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");

	i915_param_named_unsafe(enable_ips, int, 0400, "Enable IPS (default: true)");

	i915_param_named(fastboot, int, 0400,
	"Try to skip unnecessary mode sets at boot time "
	"(0=disabled, 1=enabled) "
	"Default: -1 (use per-chip default)");

	i915_param_named_unsafe(load_detect_test, bool, 0400,
	"Force-enable the VGA load detect code for testing (default:false). "
	"For developers only.");

	i915_param_named_unsafe(force_reset_modeset_test, bool, 0400,
	"Force a modeset during gpu reset for testing (default:false). "
	"For developers only.");

	i915_param_named_unsafe(invert_brightness, int, 0400,
	"Invert backlight brightness "
	"(-1 force normal, 0 machine defaults, 1 force inversion), please "
	"report PCI device ID, subsystem vendor and subsystem device ID "
	"to dri-devel@lists.freedesktop.org, if your machine needs it. "
	"It will then be included in an upcoming module version.");

	i915_param_named(disable_display, bool, 0400,
	"Disable display (default: false)");

	i915_param_named(mmio_debug, int, 0400,
	"Enable the MMIO debug code for the first N failures (default: off). "
	"This may negatively affect performance.");

	/* Special case writable file */
	i915_param_named(verbose_state_checks, bool, 0600,
	"Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");

	i915_param_named_unsafe(nuclear_pageflip, bool, 0400,
	"Force enable atomic functionality on platforms that don't have full support yet.");

	/* WA to get away with the default setting in VBT for early platforms.Will be removed */
	i915_param_named_unsafe(edp_vswing, int, 0400,
	"Ignore/Override vswing pre-emph table selection from VBT "
	"(0=use value from vbt [default], 1=low power swing(200mV),"
	"2=default swing(400mV))");

	i915_param_named_unsafe(enable_guc, int, 0400,
	"Enable GuC load for GuC submission and/or HuC load. "
	"Required functionality can be selected using bitmask values. "
	"(-1=auto [default], 0=disable, 1=GuC submission, 2=HuC load)");

	i915_param_named(guc_log_level, int, 0400,
	"GuC firmware logging level. Requires GuC to be loaded. "
	"(-1=auto [default], 0=disable, 1..4=enable with verbosity min..max)");

	i915_param_named_unsafe(guc_firmware_path, charp, 0400,
	"GuC firmware path to use instead of the default one");

	i915_param_named_unsafe(huc_firmware_path, charp, 0400,
	"HuC firmware path to use instead of the default one");

	i915_param_named_unsafe(dmc_firmware_path, charp, 0400,
	"DMC firmware path to use instead of the default one");

	i915_param_named_unsafe(enable_dp_mst, bool, 0400,
	"Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)");

	#if IS_ENABLED(CONFIG_DRM_I915_DEBUG)
	i915_param_named_unsafe(inject_probe_failure, uint, 0400,
	"Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
	#endif

	i915_param_named(enable_dpcd_backlight, int, 0400,
	"Enable support for DPCD backlight control"
	"(-1=use per-VBT LFP backlight type setting [default], 0=disabled, 1=enable, 2=force VESA interface, 3=force Intel interface)");

	#if IS_ENABLED(CONFIG_DRM_I915_GVT)
	i915_param_named(enable_gvt, bool, 0400,
	"Enable support for Intel GVT-g graphics virtualization host support(default:false)");
	#endif

	#if IS_ENABLED(CONFIG_DRM_I915_UNSTABLE_FAKE_LMEM)
	i915_param_named_unsafe(fake_lmem_start, ulong, 0400,
	"Fake LMEM start offset (default: 0)");
	#endif

	#if CONFIG_DRM_I915_REQUEST_TIMEOUT
	i915_param_named_unsafe(request_timeout_ms, uint, 0600,
	"Default request/fence/batch buffer expiration timeout.");
	#endif

	static __always_inline void _print_param(struct drm_printer *p,
	const char *name,
	const char *type,
	const void *x)
	{
	if (!__builtin_strcmp(type, "bool"))
	drm_printf(p, "i915.%s=%s\n", name, yesno((const bool )x));
	else if (!__builtin_strcmp(type, "int"))
	drm_printf(p, "i915.%s=%d\n", name, (const int )x);
	else if (!__builtin_strcmp(type, "unsigned int"))
	drm_printf(p, "i915.%s=%u\n", name, (const unsigned int )x);
	else if (!__builtin_strcmp(type, "unsigned long"))
	drm_printf(p, "i915.%s=%lu\n", name, (const unsigned long )x);
	else if (!__builtin_strcmp(type, "char *"))
	drm_printf(p, "i915.%s=%s\n", name, (const char *)x);
	else
	WARN_ONCE(1, "no printer defined for param type %s (i915.%s)\n",
	type, name);
	}

	/**
	* i915_params_dump - dump i915 modparams
	* @params: i915 modparams
	* @p: the &drm_printer
	*
	* Pretty printer for i915 modparams.
	*/
	void i915_params_dump(const struct i915_params params, struct drm_printer p)
	{
	#define PRINT(T, x, ...) _print_param(p, #x, #T, &params->x);
	I915_PARAMS_FOR_EACH(PRINT);
	#undef PRINT
	}

	static __always_inline void dup_param(const char type, void x)
	{
	if (!__builtin_strcmp(type, "char *"))
	(void )x = kstrdup((void **)x, GFP_ATOMIC);
	}

	void i915_params_copy(struct i915_params dest, const struct i915_params src)
	{
	dest = src;
	#define DUP(T, x, ...) dup_param(#T, &dest->x);
	I915_PARAMS_FOR_EACH(DUP);
	#undef DUP
	}

	static __always_inline void free_param(const char type, void x)
	{
	if (!__builtin_strcmp(type, "char *")) {
	kfree((void *)x);
	(void *)x = NULL;
	}
	}

	/* free the allocated members, not the passed in params itself */
	void i915_params_free(struct i915_params *params)
	{
	#define FREE(T, x, ...) free_param(#T, &params->x);
	I915_PARAMS_FOR_EACH(FREE);
	#undef FREE
	}