| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ZynqMP Generic PM domain support |
| * |
| * Copyright (C) 2015-2018 Xilinx, Inc. |
| * |
| * Davorin Mista <davorin.mista@aggios.com> |
| * Jolly Shah <jollys@xilinx.com> |
| * Rajan Vaja <rajan.vaja@xilinx.com> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_domain.h> |
| #include <linux/slab.h> |
| |
| #include <linux/firmware/xlnx-zynqmp.h> |
| |
| #define ZYNQMP_NUM_DOMAINS (100) |
| /* Flag stating if PM nodes mapped to the PM domain has been requested */ |
| #define ZYNQMP_PM_DOMAIN_REQUESTED BIT(0) |
| |
| /** |
| * struct zynqmp_pm_domain - Wrapper around struct generic_pm_domain |
| * @gpd: Generic power domain |
| * @node_id: PM node ID corresponding to device inside PM domain |
| * @flags: ZynqMP PM domain flags |
| */ |
| struct zynqmp_pm_domain { |
| struct generic_pm_domain gpd; |
| u32 node_id; |
| u8 flags; |
| }; |
| |
| /** |
| * zynqmp_gpd_is_active_wakeup_path() - Check if device is in wakeup source |
| * path |
| * @dev: Device to check for wakeup source path |
| * @not_used: Data member (not required) |
| * |
| * This function is checks device's child hierarchy and checks if any device is |
| * set as wakeup source. |
| * |
| * Return: 1 if device is in wakeup source path else 0 |
| */ |
| static int zynqmp_gpd_is_active_wakeup_path(struct device *dev, void *not_used) |
| { |
| int may_wakeup; |
| |
| may_wakeup = device_may_wakeup(dev); |
| if (may_wakeup) |
| return may_wakeup; |
| |
| return device_for_each_child(dev, NULL, |
| zynqmp_gpd_is_active_wakeup_path); |
| } |
| |
| /** |
| * zynqmp_gpd_power_on() - Power on PM domain |
| * @domain: Generic PM domain |
| * |
| * This function is called before devices inside a PM domain are resumed, to |
| * power on PM domain. |
| * |
| * Return: 0 on success, error code otherwise |
| */ |
| static int zynqmp_gpd_power_on(struct generic_pm_domain *domain) |
| { |
| int ret; |
| struct zynqmp_pm_domain *pd; |
| const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); |
| |
| if (!eemi_ops || !eemi_ops->set_requirement) |
| return -ENXIO; |
| |
| pd = container_of(domain, struct zynqmp_pm_domain, gpd); |
| ret = eemi_ops->set_requirement(pd->node_id, |
| ZYNQMP_PM_CAPABILITY_ACCESS, |
| ZYNQMP_PM_MAX_QOS, |
| ZYNQMP_PM_REQUEST_ACK_BLOCKING); |
| if (ret) { |
| pr_err("%s() %s set requirement for node %d failed: %d\n", |
| __func__, domain->name, pd->node_id, ret); |
| return ret; |
| } |
| |
| pr_debug("%s() Powered on %s domain\n", __func__, domain->name); |
| return 0; |
| } |
| |
| /** |
| * zynqmp_gpd_power_off() - Power off PM domain |
| * @domain: Generic PM domain |
| * |
| * This function is called after devices inside a PM domain are suspended, to |
| * power off PM domain. |
| * |
| * Return: 0 on success, error code otherwise |
| */ |
| static int zynqmp_gpd_power_off(struct generic_pm_domain *domain) |
| { |
| int ret; |
| struct pm_domain_data *pdd, *tmp; |
| struct zynqmp_pm_domain *pd; |
| u32 capabilities = 0; |
| bool may_wakeup; |
| const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); |
| |
| if (!eemi_ops || !eemi_ops->set_requirement) |
| return -ENXIO; |
| |
| pd = container_of(domain, struct zynqmp_pm_domain, gpd); |
| |
| /* If domain is already released there is nothing to be done */ |
| if (!(pd->flags & ZYNQMP_PM_DOMAIN_REQUESTED)) { |
| pr_debug("%s() %s domain is already released\n", |
| __func__, domain->name); |
| return 0; |
| } |
| |
| list_for_each_entry_safe(pdd, tmp, &domain->dev_list, list_node) { |
| /* If device is in wakeup path, set capability to WAKEUP */ |
| may_wakeup = zynqmp_gpd_is_active_wakeup_path(pdd->dev, NULL); |
| if (may_wakeup) { |
| dev_dbg(pdd->dev, "device is in wakeup path in %s\n", |
| domain->name); |
| capabilities = ZYNQMP_PM_CAPABILITY_WAKEUP; |
| break; |
| } |
| } |
| |
| ret = eemi_ops->set_requirement(pd->node_id, capabilities, 0, |
| ZYNQMP_PM_REQUEST_ACK_NO); |
| /** |
| * If powering down of any node inside this domain fails, |
| * report and return the error |
| */ |
| if (ret) { |
| pr_err("%s() %s set requirement for node %d failed: %d\n", |
| __func__, domain->name, pd->node_id, ret); |
| return ret; |
| } |
| |
| pr_debug("%s() Powered off %s domain\n", __func__, domain->name); |
| return 0; |
| } |
| |
| /** |
| * zynqmp_gpd_attach_dev() - Attach device to the PM domain |
| * @domain: Generic PM domain |
| * @dev: Device to attach |
| * |
| * Return: 0 on success, error code otherwise |
| */ |
| static int zynqmp_gpd_attach_dev(struct generic_pm_domain *domain, |
| struct device *dev) |
| { |
| int ret; |
| struct zynqmp_pm_domain *pd; |
| const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); |
| |
| if (!eemi_ops || !eemi_ops->request_node) |
| return -ENXIO; |
| |
| pd = container_of(domain, struct zynqmp_pm_domain, gpd); |
| |
| /* If this is not the first device to attach there is nothing to do */ |
| if (domain->device_count) |
| return 0; |
| |
| ret = eemi_ops->request_node(pd->node_id, 0, 0, |
| ZYNQMP_PM_REQUEST_ACK_BLOCKING); |
| /* If requesting a node fails print and return the error */ |
| if (ret) { |
| pr_err("%s() %s request failed for node %d: %d\n", |
| __func__, domain->name, pd->node_id, ret); |
| return ret; |
| } |
| |
| pd->flags |= ZYNQMP_PM_DOMAIN_REQUESTED; |
| |
| pr_debug("%s() %s attached to %s domain\n", __func__, |
| dev_name(dev), domain->name); |
| return 0; |
| } |
| |
| /** |
| * zynqmp_gpd_detach_dev() - Detach device from the PM domain |
| * @domain: Generic PM domain |
| * @dev: Device to detach |
| */ |
| static void zynqmp_gpd_detach_dev(struct generic_pm_domain *domain, |
| struct device *dev) |
| { |
| int ret; |
| struct zynqmp_pm_domain *pd; |
| const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); |
| |
| if (!eemi_ops || !eemi_ops->release_node) |
| return; |
| |
| pd = container_of(domain, struct zynqmp_pm_domain, gpd); |
| |
| /* If this is not the last device to detach there is nothing to do */ |
| if (domain->device_count) |
| return; |
| |
| ret = eemi_ops->release_node(pd->node_id); |
| /* If releasing a node fails print the error and return */ |
| if (ret) { |
| pr_err("%s() %s release failed for node %d: %d\n", |
| __func__, domain->name, pd->node_id, ret); |
| return; |
| } |
| |
| pd->flags &= ~ZYNQMP_PM_DOMAIN_REQUESTED; |
| |
| pr_debug("%s() %s detached from %s domain\n", __func__, |
| dev_name(dev), domain->name); |
| } |
| |
| static struct generic_pm_domain *zynqmp_gpd_xlate |
| (struct of_phandle_args *genpdspec, void *data) |
| { |
| struct genpd_onecell_data *genpd_data = data; |
| unsigned int i, idx = genpdspec->args[0]; |
| struct zynqmp_pm_domain *pd; |
| |
| pd = container_of(genpd_data->domains[0], struct zynqmp_pm_domain, gpd); |
| |
| if (genpdspec->args_count != 1) |
| return ERR_PTR(-EINVAL); |
| |
| /* Check for existing pm domains */ |
| for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++) { |
| if (pd[i].node_id == idx) |
| goto done; |
| } |
| |
| /** |
| * Add index in empty node_id of power domain list as no existing |
| * power domain found for current index. |
| */ |
| for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++) { |
| if (pd[i].node_id == 0) { |
| pd[i].node_id = idx; |
| break; |
| } |
| } |
| |
| done: |
| if (!genpd_data->domains[i] || i == ZYNQMP_NUM_DOMAINS) |
| return ERR_PTR(-ENOENT); |
| |
| return genpd_data->domains[i]; |
| } |
| |
| static int zynqmp_gpd_probe(struct platform_device *pdev) |
| { |
| int i; |
| struct genpd_onecell_data *zynqmp_pd_data; |
| struct generic_pm_domain **domains; |
| struct zynqmp_pm_domain *pd; |
| struct device *dev = &pdev->dev; |
| |
| pd = devm_kcalloc(dev, ZYNQMP_NUM_DOMAINS, sizeof(*pd), GFP_KERNEL); |
| if (!pd) |
| return -ENOMEM; |
| |
| zynqmp_pd_data = devm_kzalloc(dev, sizeof(*zynqmp_pd_data), GFP_KERNEL); |
| if (!zynqmp_pd_data) |
| return -ENOMEM; |
| |
| zynqmp_pd_data->xlate = zynqmp_gpd_xlate; |
| |
| domains = devm_kcalloc(dev, ZYNQMP_NUM_DOMAINS, sizeof(*domains), |
| GFP_KERNEL); |
| if (!domains) |
| return -ENOMEM; |
| |
| for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++, pd++) { |
| pd->node_id = 0; |
| pd->gpd.name = kasprintf(GFP_KERNEL, "domain%d", i); |
| pd->gpd.power_off = zynqmp_gpd_power_off; |
| pd->gpd.power_on = zynqmp_gpd_power_on; |
| pd->gpd.attach_dev = zynqmp_gpd_attach_dev; |
| pd->gpd.detach_dev = zynqmp_gpd_detach_dev; |
| |
| domains[i] = &pd->gpd; |
| |
| /* Mark all PM domains as initially powered off */ |
| pm_genpd_init(&pd->gpd, NULL, true); |
| } |
| |
| zynqmp_pd_data->domains = domains; |
| zynqmp_pd_data->num_domains = ZYNQMP_NUM_DOMAINS; |
| of_genpd_add_provider_onecell(dev->parent->of_node, zynqmp_pd_data); |
| |
| return 0; |
| } |
| |
| static int zynqmp_gpd_remove(struct platform_device *pdev) |
| { |
| of_genpd_del_provider(pdev->dev.parent->of_node); |
| |
| return 0; |
| } |
| |
| static struct platform_driver zynqmp_power_domain_driver = { |
| .driver = { |
| .name = "zynqmp_power_controller", |
| }, |
| .probe = zynqmp_gpd_probe, |
| .remove = zynqmp_gpd_remove, |
| }; |
| module_platform_driver(zynqmp_power_domain_driver); |
| |
| MODULE_ALIAS("platform:zynqmp_power_controller"); |