| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * NXP FXLS8962AF/FXLS8964AF Accelerometer Core Driver |
| * |
| * Copyright 2021 Connected Cars A/S |
| * |
| * Datasheet: |
| * https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf |
| * https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf |
| * |
| * Errata: |
| * https://www.nxp.com/docs/en/errata/ES_FXLS8962AF.pdf |
| */ |
| |
| #include <linux/bits.h> |
| #include <linux/bitfield.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/of_irq.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/events.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/kfifo_buf.h> |
| #include <linux/iio/sysfs.h> |
| |
| #include "fxls8962af.h" |
| |
| #define FXLS8962AF_INT_STATUS 0x00 |
| #define FXLS8962AF_INT_STATUS_SRC_BOOT BIT(0) |
| #define FXLS8962AF_INT_STATUS_SRC_SDCD_OT BIT(4) |
| #define FXLS8962AF_INT_STATUS_SRC_BUF BIT(5) |
| #define FXLS8962AF_INT_STATUS_SRC_DRDY BIT(7) |
| #define FXLS8962AF_TEMP_OUT 0x01 |
| #define FXLS8962AF_VECM_LSB 0x02 |
| #define FXLS8962AF_OUT_X_LSB 0x04 |
| #define FXLS8962AF_OUT_Y_LSB 0x06 |
| #define FXLS8962AF_OUT_Z_LSB 0x08 |
| #define FXLS8962AF_BUF_STATUS 0x0b |
| #define FXLS8962AF_BUF_STATUS_BUF_CNT GENMASK(5, 0) |
| #define FXLS8962AF_BUF_STATUS_BUF_OVF BIT(6) |
| #define FXLS8962AF_BUF_STATUS_BUF_WMRK BIT(7) |
| #define FXLS8962AF_BUF_X_LSB 0x0c |
| #define FXLS8962AF_BUF_Y_LSB 0x0e |
| #define FXLS8962AF_BUF_Z_LSB 0x10 |
| |
| #define FXLS8962AF_PROD_REV 0x12 |
| #define FXLS8962AF_WHO_AM_I 0x13 |
| |
| #define FXLS8962AF_SYS_MODE 0x14 |
| #define FXLS8962AF_SENS_CONFIG1 0x15 |
| #define FXLS8962AF_SENS_CONFIG1_ACTIVE BIT(0) |
| #define FXLS8962AF_SENS_CONFIG1_RST BIT(7) |
| #define FXLS8962AF_SC1_FSR_MASK GENMASK(2, 1) |
| #define FXLS8962AF_SC1_FSR_PREP(x) FIELD_PREP(FXLS8962AF_SC1_FSR_MASK, (x)) |
| #define FXLS8962AF_SC1_FSR_GET(x) FIELD_GET(FXLS8962AF_SC1_FSR_MASK, (x)) |
| |
| #define FXLS8962AF_SENS_CONFIG2 0x16 |
| #define FXLS8962AF_SENS_CONFIG3 0x17 |
| #define FXLS8962AF_SC3_WAKE_ODR_MASK GENMASK(7, 4) |
| #define FXLS8962AF_SC3_WAKE_ODR_PREP(x) FIELD_PREP(FXLS8962AF_SC3_WAKE_ODR_MASK, (x)) |
| #define FXLS8962AF_SC3_WAKE_ODR_GET(x) FIELD_GET(FXLS8962AF_SC3_WAKE_ODR_MASK, (x)) |
| #define FXLS8962AF_SENS_CONFIG4 0x18 |
| #define FXLS8962AF_SC4_INT_PP_OD_MASK BIT(1) |
| #define FXLS8962AF_SC4_INT_PP_OD_PREP(x) FIELD_PREP(FXLS8962AF_SC4_INT_PP_OD_MASK, (x)) |
| #define FXLS8962AF_SC4_INT_POL_MASK BIT(0) |
| #define FXLS8962AF_SC4_INT_POL_PREP(x) FIELD_PREP(FXLS8962AF_SC4_INT_POL_MASK, (x)) |
| #define FXLS8962AF_SENS_CONFIG5 0x19 |
| |
| #define FXLS8962AF_WAKE_IDLE_LSB 0x1b |
| #define FXLS8962AF_SLEEP_IDLE_LSB 0x1c |
| #define FXLS8962AF_ASLP_COUNT_LSB 0x1e |
| |
| #define FXLS8962AF_INT_EN 0x20 |
| #define FXLS8962AF_INT_EN_SDCD_OT_EN BIT(5) |
| #define FXLS8962AF_INT_EN_BUF_EN BIT(6) |
| #define FXLS8962AF_INT_PIN_SEL 0x21 |
| #define FXLS8962AF_INT_PIN_SEL_MASK GENMASK(7, 0) |
| #define FXLS8962AF_INT_PIN_SEL_INT1 0x00 |
| #define FXLS8962AF_INT_PIN_SEL_INT2 GENMASK(7, 0) |
| |
| #define FXLS8962AF_OFF_X 0x22 |
| #define FXLS8962AF_OFF_Y 0x23 |
| #define FXLS8962AF_OFF_Z 0x24 |
| |
| #define FXLS8962AF_BUF_CONFIG1 0x26 |
| #define FXLS8962AF_BC1_BUF_MODE_MASK GENMASK(6, 5) |
| #define FXLS8962AF_BC1_BUF_MODE_PREP(x) FIELD_PREP(FXLS8962AF_BC1_BUF_MODE_MASK, (x)) |
| #define FXLS8962AF_BUF_CONFIG2 0x27 |
| #define FXLS8962AF_BUF_CONFIG2_BUF_WMRK GENMASK(5, 0) |
| |
| #define FXLS8962AF_ORIENT_STATUS 0x28 |
| #define FXLS8962AF_ORIENT_CONFIG 0x29 |
| #define FXLS8962AF_ORIENT_DBCOUNT 0x2a |
| #define FXLS8962AF_ORIENT_BF_ZCOMP 0x2b |
| #define FXLS8962AF_ORIENT_THS_REG 0x2c |
| |
| #define FXLS8962AF_SDCD_INT_SRC1 0x2d |
| #define FXLS8962AF_SDCD_INT_SRC1_X_OT BIT(5) |
| #define FXLS8962AF_SDCD_INT_SRC1_X_POL BIT(4) |
| #define FXLS8962AF_SDCD_INT_SRC1_Y_OT BIT(3) |
| #define FXLS8962AF_SDCD_INT_SRC1_Y_POL BIT(2) |
| #define FXLS8962AF_SDCD_INT_SRC1_Z_OT BIT(1) |
| #define FXLS8962AF_SDCD_INT_SRC1_Z_POL BIT(0) |
| #define FXLS8962AF_SDCD_INT_SRC2 0x2e |
| #define FXLS8962AF_SDCD_CONFIG1 0x2f |
| #define FXLS8962AF_SDCD_CONFIG1_Z_OT_EN BIT(3) |
| #define FXLS8962AF_SDCD_CONFIG1_Y_OT_EN BIT(4) |
| #define FXLS8962AF_SDCD_CONFIG1_X_OT_EN BIT(5) |
| #define FXLS8962AF_SDCD_CONFIG1_OT_ELE BIT(7) |
| #define FXLS8962AF_SDCD_CONFIG2 0x30 |
| #define FXLS8962AF_SDCD_CONFIG2_SDCD_EN BIT(7) |
| #define FXLS8962AF_SC2_REF_UPDM_AC GENMASK(6, 5) |
| #define FXLS8962AF_SDCD_OT_DBCNT 0x31 |
| #define FXLS8962AF_SDCD_WT_DBCNT 0x32 |
| #define FXLS8962AF_SDCD_LTHS_LSB 0x33 |
| #define FXLS8962AF_SDCD_UTHS_LSB 0x35 |
| |
| #define FXLS8962AF_SELF_TEST_CONFIG1 0x37 |
| #define FXLS8962AF_SELF_TEST_CONFIG2 0x38 |
| |
| #define FXLS8962AF_MAX_REG 0x38 |
| |
| #define FXLS8962AF_DEVICE_ID 0x62 |
| #define FXLS8964AF_DEVICE_ID 0x84 |
| |
| /* Raw temp channel offset */ |
| #define FXLS8962AF_TEMP_CENTER_VAL 25 |
| |
| #define FXLS8962AF_AUTO_SUSPEND_DELAY_MS 2000 |
| |
| #define FXLS8962AF_FIFO_LENGTH 32 |
| #define FXLS8962AF_SCALE_TABLE_LEN 4 |
| #define FXLS8962AF_SAMP_FREQ_TABLE_LEN 13 |
| |
| static const int fxls8962af_scale_table[FXLS8962AF_SCALE_TABLE_LEN][2] = { |
| {0, IIO_G_TO_M_S_2(980000)}, |
| {0, IIO_G_TO_M_S_2(1950000)}, |
| {0, IIO_G_TO_M_S_2(3910000)}, |
| {0, IIO_G_TO_M_S_2(7810000)}, |
| }; |
| |
| static const int fxls8962af_samp_freq_table[FXLS8962AF_SAMP_FREQ_TABLE_LEN][2] = { |
| {3200, 0}, {1600, 0}, {800, 0}, {400, 0}, {200, 0}, {100, 0}, |
| {50, 0}, {25, 0}, {12, 500000}, {6, 250000}, {3, 125000}, |
| {1, 563000}, {0, 781000}, |
| }; |
| |
| struct fxls8962af_chip_info { |
| const char *name; |
| const struct iio_chan_spec *channels; |
| int num_channels; |
| u8 chip_id; |
| }; |
| |
| struct fxls8962af_data { |
| struct regmap *regmap; |
| const struct fxls8962af_chip_info *chip_info; |
| struct { |
| __le16 channels[3]; |
| s64 ts __aligned(8); |
| } scan; |
| int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */ |
| struct iio_mount_matrix orientation; |
| int irq; |
| u8 watermark; |
| u8 enable_event; |
| u16 lower_thres; |
| u16 upper_thres; |
| }; |
| |
| const struct regmap_config fxls8962af_i2c_regmap_conf = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = FXLS8962AF_MAX_REG, |
| }; |
| EXPORT_SYMBOL_NS_GPL(fxls8962af_i2c_regmap_conf, IIO_FXLS8962AF); |
| |
| const struct regmap_config fxls8962af_spi_regmap_conf = { |
| .reg_bits = 8, |
| .pad_bits = 8, |
| .val_bits = 8, |
| .max_register = FXLS8962AF_MAX_REG, |
| }; |
| EXPORT_SYMBOL_NS_GPL(fxls8962af_spi_regmap_conf, IIO_FXLS8962AF); |
| |
| enum { |
| fxls8962af_idx_x, |
| fxls8962af_idx_y, |
| fxls8962af_idx_z, |
| fxls8962af_idx_ts, |
| }; |
| |
| enum fxls8962af_int_pin { |
| FXLS8962AF_PIN_INT1, |
| FXLS8962AF_PIN_INT2, |
| }; |
| |
| static int fxls8962af_power_on(struct fxls8962af_data *data) |
| { |
| struct device *dev = regmap_get_device(data->regmap); |
| int ret; |
| |
| ret = pm_runtime_resume_and_get(dev); |
| if (ret) |
| dev_err(dev, "failed to power on\n"); |
| |
| return ret; |
| } |
| |
| static int fxls8962af_power_off(struct fxls8962af_data *data) |
| { |
| struct device *dev = regmap_get_device(data->regmap); |
| int ret; |
| |
| pm_runtime_mark_last_busy(dev); |
| ret = pm_runtime_put_autosuspend(dev); |
| if (ret) |
| dev_err(dev, "failed to power off\n"); |
| |
| return ret; |
| } |
| |
| static int fxls8962af_standby(struct fxls8962af_data *data) |
| { |
| return regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1, |
| FXLS8962AF_SENS_CONFIG1_ACTIVE, 0); |
| } |
| |
| static int fxls8962af_active(struct fxls8962af_data *data) |
| { |
| return regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1, |
| FXLS8962AF_SENS_CONFIG1_ACTIVE, 1); |
| } |
| |
| static int fxls8962af_is_active(struct fxls8962af_data *data) |
| { |
| unsigned int reg; |
| int ret; |
| |
| ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG1, ®); |
| if (ret) |
| return ret; |
| |
| return reg & FXLS8962AF_SENS_CONFIG1_ACTIVE; |
| } |
| |
| static int fxls8962af_get_out(struct fxls8962af_data *data, |
| struct iio_chan_spec const *chan, int *val) |
| { |
| struct device *dev = regmap_get_device(data->regmap); |
| __le16 raw_val; |
| int is_active; |
| int ret; |
| |
| is_active = fxls8962af_is_active(data); |
| if (!is_active) { |
| ret = fxls8962af_power_on(data); |
| if (ret) |
| return ret; |
| } |
| |
| ret = regmap_bulk_read(data->regmap, chan->address, |
| &raw_val, sizeof(data->lower_thres)); |
| |
| if (!is_active) |
| fxls8962af_power_off(data); |
| |
| if (ret) { |
| dev_err(dev, "failed to get out reg 0x%lx\n", chan->address); |
| return ret; |
| } |
| |
| *val = sign_extend32(le16_to_cpu(raw_val), |
| chan->scan_type.realbits - 1); |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int fxls8962af_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_SCALE: |
| *type = IIO_VAL_INT_PLUS_NANO; |
| *vals = (int *)fxls8962af_scale_table; |
| *length = ARRAY_SIZE(fxls8962af_scale_table) * 2; |
| return IIO_AVAIL_LIST; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| *vals = (int *)fxls8962af_samp_freq_table; |
| *length = ARRAY_SIZE(fxls8962af_samp_freq_table) * 2; |
| return IIO_AVAIL_LIST; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int fxls8962af_write_raw_get_fmt(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_SCALE: |
| return IIO_VAL_INT_PLUS_NANO; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return IIO_VAL_INT_PLUS_NANO; |
| } |
| } |
| |
| static int fxls8962af_update_config(struct fxls8962af_data *data, u8 reg, |
| u8 mask, u8 val) |
| { |
| int ret; |
| int is_active; |
| |
| is_active = fxls8962af_is_active(data); |
| if (is_active) { |
| ret = fxls8962af_standby(data); |
| if (ret) |
| return ret; |
| } |
| |
| ret = regmap_update_bits(data->regmap, reg, mask, val); |
| if (ret) |
| return ret; |
| |
| if (is_active) { |
| ret = fxls8962af_active(data); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int fxls8962af_set_full_scale(struct fxls8962af_data *data, u32 scale) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(fxls8962af_scale_table); i++) |
| if (scale == fxls8962af_scale_table[i][1]) |
| break; |
| |
| if (i == ARRAY_SIZE(fxls8962af_scale_table)) |
| return -EINVAL; |
| |
| return fxls8962af_update_config(data, FXLS8962AF_SENS_CONFIG1, |
| FXLS8962AF_SC1_FSR_MASK, |
| FXLS8962AF_SC1_FSR_PREP(i)); |
| } |
| |
| static unsigned int fxls8962af_read_full_scale(struct fxls8962af_data *data, |
| int *val) |
| { |
| int ret; |
| unsigned int reg; |
| u8 range_idx; |
| |
| ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG1, ®); |
| if (ret) |
| return ret; |
| |
| range_idx = FXLS8962AF_SC1_FSR_GET(reg); |
| |
| *val = fxls8962af_scale_table[range_idx][1]; |
| |
| return IIO_VAL_INT_PLUS_NANO; |
| } |
| |
| static int fxls8962af_set_samp_freq(struct fxls8962af_data *data, u32 val, |
| u32 val2) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(fxls8962af_samp_freq_table); i++) |
| if (val == fxls8962af_samp_freq_table[i][0] && |
| val2 == fxls8962af_samp_freq_table[i][1]) |
| break; |
| |
| if (i == ARRAY_SIZE(fxls8962af_samp_freq_table)) |
| return -EINVAL; |
| |
| return fxls8962af_update_config(data, FXLS8962AF_SENS_CONFIG3, |
| FXLS8962AF_SC3_WAKE_ODR_MASK, |
| FXLS8962AF_SC3_WAKE_ODR_PREP(i)); |
| } |
| |
| static unsigned int fxls8962af_read_samp_freq(struct fxls8962af_data *data, |
| int *val, int *val2) |
| { |
| int ret; |
| unsigned int reg; |
| u8 range_idx; |
| |
| ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG3, ®); |
| if (ret) |
| return ret; |
| |
| range_idx = FXLS8962AF_SC3_WAKE_ODR_GET(reg); |
| |
| *val = fxls8962af_samp_freq_table[range_idx][0]; |
| *val2 = fxls8962af_samp_freq_table[range_idx][1]; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| static int fxls8962af_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| switch (chan->type) { |
| case IIO_TEMP: |
| case IIO_ACCEL: |
| return fxls8962af_get_out(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_CHAN_INFO_OFFSET: |
| if (chan->type != IIO_TEMP) |
| return -EINVAL; |
| |
| *val = FXLS8962AF_TEMP_CENTER_VAL; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| *val = 0; |
| return fxls8962af_read_full_scale(data, val2); |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return fxls8962af_read_samp_freq(data, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int fxls8962af_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SCALE: |
| if (val != 0) |
| return -EINVAL; |
| |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = fxls8962af_set_full_scale(data, val2); |
| |
| iio_device_release_direct_mode(indio_dev); |
| return ret; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = fxls8962af_set_samp_freq(data, val, val2); |
| |
| iio_device_release_direct_mode(indio_dev); |
| return ret; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int fxls8962af_event_setup(struct fxls8962af_data *data, int state) |
| { |
| /* Enable wakeup interrupt */ |
| int mask = FXLS8962AF_INT_EN_SDCD_OT_EN; |
| int value = state ? mask : 0; |
| |
| return regmap_update_bits(data->regmap, FXLS8962AF_INT_EN, mask, value); |
| } |
| |
| static int fxls8962af_set_watermark(struct iio_dev *indio_dev, unsigned val) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| |
| if (val > FXLS8962AF_FIFO_LENGTH) |
| val = FXLS8962AF_FIFO_LENGTH; |
| |
| data->watermark = val; |
| |
| return 0; |
| } |
| |
| static int __fxls8962af_set_thresholds(struct fxls8962af_data *data, |
| const struct iio_chan_spec *chan, |
| enum iio_event_direction dir, |
| int val) |
| { |
| switch (dir) { |
| case IIO_EV_DIR_FALLING: |
| data->lower_thres = val; |
| return regmap_bulk_write(data->regmap, FXLS8962AF_SDCD_LTHS_LSB, |
| &data->lower_thres, sizeof(data->lower_thres)); |
| case IIO_EV_DIR_RISING: |
| data->upper_thres = val; |
| return regmap_bulk_write(data->regmap, FXLS8962AF_SDCD_UTHS_LSB, |
| &data->upper_thres, sizeof(data->upper_thres)); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int fxls8962af_read_event(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int *val, int *val2) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| if (type != IIO_EV_TYPE_THRESH) |
| return -EINVAL; |
| |
| switch (dir) { |
| case IIO_EV_DIR_FALLING: |
| ret = regmap_bulk_read(data->regmap, FXLS8962AF_SDCD_LTHS_LSB, |
| &data->lower_thres, sizeof(data->lower_thres)); |
| if (ret) |
| return ret; |
| |
| *val = sign_extend32(data->lower_thres, chan->scan_type.realbits - 1); |
| return IIO_VAL_INT; |
| case IIO_EV_DIR_RISING: |
| ret = regmap_bulk_read(data->regmap, FXLS8962AF_SDCD_UTHS_LSB, |
| &data->upper_thres, sizeof(data->upper_thres)); |
| if (ret) |
| return ret; |
| |
| *val = sign_extend32(data->upper_thres, chan->scan_type.realbits - 1); |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int fxls8962af_write_event(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int val, int val2) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| int ret, val_masked; |
| |
| if (type != IIO_EV_TYPE_THRESH) |
| return -EINVAL; |
| |
| if (val < -2048 || val > 2047) |
| return -EINVAL; |
| |
| if (data->enable_event) |
| return -EBUSY; |
| |
| val_masked = val & GENMASK(11, 0); |
| if (fxls8962af_is_active(data)) { |
| ret = fxls8962af_standby(data); |
| if (ret) |
| return ret; |
| |
| ret = __fxls8962af_set_thresholds(data, chan, dir, val_masked); |
| if (ret) |
| return ret; |
| |
| return fxls8962af_active(data); |
| } else { |
| return __fxls8962af_set_thresholds(data, chan, dir, val_masked); |
| } |
| } |
| |
| static int |
| fxls8962af_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| |
| if (type != IIO_EV_TYPE_THRESH) |
| return -EINVAL; |
| |
| switch (chan->channel2) { |
| case IIO_MOD_X: |
| return !!(FXLS8962AF_SDCD_CONFIG1_X_OT_EN & data->enable_event); |
| case IIO_MOD_Y: |
| return !!(FXLS8962AF_SDCD_CONFIG1_Y_OT_EN & data->enable_event); |
| case IIO_MOD_Z: |
| return !!(FXLS8962AF_SDCD_CONFIG1_Z_OT_EN & data->enable_event); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int |
| fxls8962af_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, int state) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| u8 enable_event, enable_bits; |
| int ret, value; |
| |
| if (type != IIO_EV_TYPE_THRESH) |
| return -EINVAL; |
| |
| switch (chan->channel2) { |
| case IIO_MOD_X: |
| enable_bits = FXLS8962AF_SDCD_CONFIG1_X_OT_EN; |
| break; |
| case IIO_MOD_Y: |
| enable_bits = FXLS8962AF_SDCD_CONFIG1_Y_OT_EN; |
| break; |
| case IIO_MOD_Z: |
| enable_bits = FXLS8962AF_SDCD_CONFIG1_Z_OT_EN; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (state) |
| enable_event = data->enable_event | enable_bits; |
| else |
| enable_event = data->enable_event & ~enable_bits; |
| |
| if (data->enable_event == enable_event) |
| return 0; |
| |
| ret = fxls8962af_standby(data); |
| if (ret) |
| return ret; |
| |
| /* Enable events */ |
| value = enable_event | FXLS8962AF_SDCD_CONFIG1_OT_ELE; |
| ret = regmap_write(data->regmap, FXLS8962AF_SDCD_CONFIG1, value); |
| if (ret) |
| return ret; |
| |
| /* |
| * Enable update of SDCD_REF_X/Y/Z values with the current decimated and |
| * trimmed X/Y/Z acceleration input data. This allows for acceleration |
| * slope detection with Data(n) to Data(n–1) always used as the input |
| * to the window comparator. |
| */ |
| value = enable_event ? |
| FXLS8962AF_SDCD_CONFIG2_SDCD_EN | FXLS8962AF_SC2_REF_UPDM_AC : |
| 0x00; |
| ret = regmap_write(data->regmap, FXLS8962AF_SDCD_CONFIG2, value); |
| if (ret) |
| return ret; |
| |
| ret = fxls8962af_event_setup(data, state); |
| if (ret) |
| return ret; |
| |
| data->enable_event = enable_event; |
| |
| if (data->enable_event) { |
| fxls8962af_active(data); |
| ret = fxls8962af_power_on(data); |
| } else { |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| /* Not in buffered mode so disable power */ |
| ret = fxls8962af_power_off(data); |
| |
| iio_device_release_direct_mode(indio_dev); |
| } |
| |
| return ret; |
| } |
| |
| static const struct iio_event_spec fxls8962af_event[] = { |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_EITHER, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| }, |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), |
| }, |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), |
| }, |
| }; |
| |
| #define FXLS8962AF_CHANNEL(axis, reg, idx) { \ |
| .type = IIO_ACCEL, \ |
| .address = reg, \ |
| .modified = 1, \ |
| .channel2 = IIO_MOD_##axis, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = idx, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .endianness = IIO_LE, \ |
| }, \ |
| .event_spec = fxls8962af_event, \ |
| .num_event_specs = ARRAY_SIZE(fxls8962af_event), \ |
| } |
| |
| #define FXLS8962AF_TEMP_CHANNEL { \ |
| .type = IIO_TEMP, \ |
| .address = FXLS8962AF_TEMP_OUT, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_OFFSET),\ |
| .scan_index = -1, \ |
| .scan_type = { \ |
| .realbits = 8, \ |
| .storagebits = 8, \ |
| }, \ |
| } |
| |
| static const struct iio_chan_spec fxls8962af_channels[] = { |
| FXLS8962AF_CHANNEL(X, FXLS8962AF_OUT_X_LSB, fxls8962af_idx_x), |
| FXLS8962AF_CHANNEL(Y, FXLS8962AF_OUT_Y_LSB, fxls8962af_idx_y), |
| FXLS8962AF_CHANNEL(Z, FXLS8962AF_OUT_Z_LSB, fxls8962af_idx_z), |
| IIO_CHAN_SOFT_TIMESTAMP(fxls8962af_idx_ts), |
| FXLS8962AF_TEMP_CHANNEL, |
| }; |
| |
| static const struct fxls8962af_chip_info fxls_chip_info_table[] = { |
| [fxls8962af] = { |
| .chip_id = FXLS8962AF_DEVICE_ID, |
| .name = "fxls8962af", |
| .channels = fxls8962af_channels, |
| .num_channels = ARRAY_SIZE(fxls8962af_channels), |
| }, |
| [fxls8964af] = { |
| .chip_id = FXLS8964AF_DEVICE_ID, |
| .name = "fxls8964af", |
| .channels = fxls8962af_channels, |
| .num_channels = ARRAY_SIZE(fxls8962af_channels), |
| }, |
| }; |
| |
| static const struct iio_info fxls8962af_info = { |
| .read_raw = &fxls8962af_read_raw, |
| .write_raw = &fxls8962af_write_raw, |
| .write_raw_get_fmt = fxls8962af_write_raw_get_fmt, |
| .read_event_value = fxls8962af_read_event, |
| .write_event_value = fxls8962af_write_event, |
| .read_event_config = fxls8962af_read_event_config, |
| .write_event_config = fxls8962af_write_event_config, |
| .read_avail = fxls8962af_read_avail, |
| .hwfifo_set_watermark = fxls8962af_set_watermark, |
| }; |
| |
| static int fxls8962af_reset(struct fxls8962af_data *data) |
| { |
| struct device *dev = regmap_get_device(data->regmap); |
| unsigned int reg; |
| int ret; |
| |
| ret = regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1, |
| FXLS8962AF_SENS_CONFIG1_RST, |
| FXLS8962AF_SENS_CONFIG1_RST); |
| if (ret) |
| return ret; |
| |
| /* TBOOT1, TBOOT2, specifies we have to wait between 1 - 17.7ms */ |
| ret = regmap_read_poll_timeout(data->regmap, FXLS8962AF_INT_STATUS, reg, |
| (reg & FXLS8962AF_INT_STATUS_SRC_BOOT), |
| 1000, 18000); |
| if (ret == -ETIMEDOUT) |
| dev_err(dev, "reset timeout, int_status = 0x%x\n", reg); |
| |
| return ret; |
| } |
| |
| static int __fxls8962af_fifo_set_mode(struct fxls8962af_data *data, bool onoff) |
| { |
| int ret; |
| |
| /* Enable watermark at max fifo size */ |
| ret = regmap_update_bits(data->regmap, FXLS8962AF_BUF_CONFIG2, |
| FXLS8962AF_BUF_CONFIG2_BUF_WMRK, |
| data->watermark); |
| if (ret) |
| return ret; |
| |
| return regmap_update_bits(data->regmap, FXLS8962AF_BUF_CONFIG1, |
| FXLS8962AF_BC1_BUF_MODE_MASK, |
| FXLS8962AF_BC1_BUF_MODE_PREP(onoff)); |
| } |
| |
| static int fxls8962af_buffer_preenable(struct iio_dev *indio_dev) |
| { |
| return fxls8962af_power_on(iio_priv(indio_dev)); |
| } |
| |
| static int fxls8962af_buffer_postenable(struct iio_dev *indio_dev) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| fxls8962af_standby(data); |
| |
| /* Enable buffer interrupt */ |
| ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_EN, |
| FXLS8962AF_INT_EN_BUF_EN, |
| FXLS8962AF_INT_EN_BUF_EN); |
| if (ret) |
| return ret; |
| |
| ret = __fxls8962af_fifo_set_mode(data, true); |
| |
| fxls8962af_active(data); |
| |
| return ret; |
| } |
| |
| static int fxls8962af_buffer_predisable(struct iio_dev *indio_dev) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| fxls8962af_standby(data); |
| |
| /* Disable buffer interrupt */ |
| ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_EN, |
| FXLS8962AF_INT_EN_BUF_EN, 0); |
| if (ret) |
| return ret; |
| |
| ret = __fxls8962af_fifo_set_mode(data, false); |
| |
| if (data->enable_event) |
| fxls8962af_active(data); |
| |
| return ret; |
| } |
| |
| static int fxls8962af_buffer_postdisable(struct iio_dev *indio_dev) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| |
| if (!data->enable_event) |
| fxls8962af_power_off(data); |
| |
| return 0; |
| } |
| |
| static const struct iio_buffer_setup_ops fxls8962af_buffer_ops = { |
| .preenable = fxls8962af_buffer_preenable, |
| .postenable = fxls8962af_buffer_postenable, |
| .predisable = fxls8962af_buffer_predisable, |
| .postdisable = fxls8962af_buffer_postdisable, |
| }; |
| |
| static int fxls8962af_i2c_raw_read_errata3(struct fxls8962af_data *data, |
| u16 *buffer, int samples, |
| int sample_length) |
| { |
| int i, ret; |
| |
| for (i = 0; i < samples; i++) { |
| ret = regmap_raw_read(data->regmap, FXLS8962AF_BUF_X_LSB, |
| &buffer[i * 3], sample_length); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int fxls8962af_fifo_transfer(struct fxls8962af_data *data, |
| u16 *buffer, int samples) |
| { |
| struct device *dev = regmap_get_device(data->regmap); |
| int sample_length = 3 * sizeof(*buffer); |
| int total_length = samples * sample_length; |
| int ret; |
| |
| if (i2c_verify_client(dev) && |
| data->chip_info->chip_id == FXLS8962AF_DEVICE_ID) |
| /* |
| * Due to errata bug (only applicable on fxls8962af): |
| * E3: FIFO burst read operation error using I2C interface |
| * We have to avoid burst reads on I2C.. |
| */ |
| ret = fxls8962af_i2c_raw_read_errata3(data, buffer, samples, |
| sample_length); |
| else |
| ret = regmap_raw_read(data->regmap, FXLS8962AF_BUF_X_LSB, buffer, |
| total_length); |
| |
| if (ret) |
| dev_err(dev, "Error transferring data from fifo: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int fxls8962af_fifo_flush(struct iio_dev *indio_dev) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| struct device *dev = regmap_get_device(data->regmap); |
| u16 buffer[FXLS8962AF_FIFO_LENGTH * 3]; |
| uint64_t sample_period; |
| unsigned int reg; |
| int64_t tstamp; |
| int ret, i; |
| u8 count; |
| |
| ret = regmap_read(data->regmap, FXLS8962AF_BUF_STATUS, ®); |
| if (ret) |
| return ret; |
| |
| if (reg & FXLS8962AF_BUF_STATUS_BUF_OVF) { |
| dev_err(dev, "Buffer overflow"); |
| return -EOVERFLOW; |
| } |
| |
| count = reg & FXLS8962AF_BUF_STATUS_BUF_CNT; |
| if (!count) |
| return 0; |
| |
| data->old_timestamp = data->timestamp; |
| data->timestamp = iio_get_time_ns(indio_dev); |
| |
| /* |
| * Approximate timestamps for each of the sample based on the sampling, |
| * frequency, timestamp for last sample and number of samples. |
| */ |
| sample_period = (data->timestamp - data->old_timestamp); |
| do_div(sample_period, count); |
| tstamp = data->timestamp - (count - 1) * sample_period; |
| |
| ret = fxls8962af_fifo_transfer(data, buffer, count); |
| if (ret) |
| return ret; |
| |
| /* Demux hw FIFO into kfifo. */ |
| for (i = 0; i < count; i++) { |
| int j, bit; |
| |
| j = 0; |
| for_each_set_bit(bit, indio_dev->active_scan_mask, |
| indio_dev->masklength) { |
| memcpy(&data->scan.channels[j++], &buffer[i * 3 + bit], |
| sizeof(data->scan.channels[0])); |
| } |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, |
| tstamp); |
| |
| tstamp += sample_period; |
| } |
| |
| return count; |
| } |
| |
| static int fxls8962af_event_interrupt(struct iio_dev *indio_dev) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| s64 ts = iio_get_time_ns(indio_dev); |
| unsigned int reg; |
| u64 ev_code; |
| int ret; |
| |
| ret = regmap_read(data->regmap, FXLS8962AF_SDCD_INT_SRC1, ®); |
| if (ret) |
| return ret; |
| |
| if (reg & FXLS8962AF_SDCD_INT_SRC1_X_OT) { |
| ev_code = reg & FXLS8962AF_SDCD_INT_SRC1_X_POL ? |
| IIO_EV_DIR_RISING : IIO_EV_DIR_FALLING; |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, |
| IIO_EV_TYPE_THRESH, ev_code), ts); |
| } |
| |
| if (reg & FXLS8962AF_SDCD_INT_SRC1_Y_OT) { |
| ev_code = reg & FXLS8962AF_SDCD_INT_SRC1_Y_POL ? |
| IIO_EV_DIR_RISING : IIO_EV_DIR_FALLING; |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, |
| IIO_EV_TYPE_THRESH, ev_code), ts); |
| } |
| |
| if (reg & FXLS8962AF_SDCD_INT_SRC1_Z_OT) { |
| ev_code = reg & FXLS8962AF_SDCD_INT_SRC1_Z_POL ? |
| IIO_EV_DIR_RISING : IIO_EV_DIR_FALLING; |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, |
| IIO_EV_TYPE_THRESH, ev_code), ts); |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t fxls8962af_interrupt(int irq, void *p) |
| { |
| struct iio_dev *indio_dev = p; |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| unsigned int reg; |
| int ret; |
| |
| ret = regmap_read(data->regmap, FXLS8962AF_INT_STATUS, ®); |
| if (ret) |
| return IRQ_NONE; |
| |
| if (reg & FXLS8962AF_INT_STATUS_SRC_BUF) { |
| ret = fxls8962af_fifo_flush(indio_dev); |
| if (ret < 0) |
| return IRQ_NONE; |
| |
| return IRQ_HANDLED; |
| } |
| |
| if (reg & FXLS8962AF_INT_STATUS_SRC_SDCD_OT) { |
| ret = fxls8962af_event_interrupt(indio_dev); |
| if (ret < 0) |
| return IRQ_NONE; |
| |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| static void fxls8962af_pm_disable(void *dev_ptr) |
| { |
| struct device *dev = dev_ptr; |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| |
| pm_runtime_disable(dev); |
| pm_runtime_set_suspended(dev); |
| pm_runtime_put_noidle(dev); |
| |
| fxls8962af_standby(iio_priv(indio_dev)); |
| } |
| |
| static void fxls8962af_get_irq(struct device_node *of_node, |
| enum fxls8962af_int_pin *pin) |
| { |
| int irq; |
| |
| irq = of_irq_get_byname(of_node, "INT2"); |
| if (irq > 0) { |
| *pin = FXLS8962AF_PIN_INT2; |
| return; |
| } |
| |
| *pin = FXLS8962AF_PIN_INT1; |
| } |
| |
| static int fxls8962af_irq_setup(struct iio_dev *indio_dev, int irq) |
| { |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| struct device *dev = regmap_get_device(data->regmap); |
| unsigned long irq_type; |
| bool irq_active_high; |
| enum fxls8962af_int_pin int_pin; |
| u8 int_pin_sel; |
| int ret; |
| |
| fxls8962af_get_irq(dev->of_node, &int_pin); |
| switch (int_pin) { |
| case FXLS8962AF_PIN_INT1: |
| int_pin_sel = FXLS8962AF_INT_PIN_SEL_INT1; |
| break; |
| case FXLS8962AF_PIN_INT2: |
| int_pin_sel = FXLS8962AF_INT_PIN_SEL_INT2; |
| break; |
| default: |
| dev_err(dev, "unsupported int pin selected\n"); |
| return -EINVAL; |
| } |
| |
| ret = regmap_update_bits(data->regmap, FXLS8962AF_INT_PIN_SEL, |
| FXLS8962AF_INT_PIN_SEL_MASK, int_pin_sel); |
| if (ret) |
| return ret; |
| |
| irq_type = irqd_get_trigger_type(irq_get_irq_data(irq)); |
| |
| switch (irq_type) { |
| case IRQF_TRIGGER_HIGH: |
| case IRQF_TRIGGER_RISING: |
| irq_active_high = true; |
| break; |
| case IRQF_TRIGGER_LOW: |
| case IRQF_TRIGGER_FALLING: |
| irq_active_high = false; |
| break; |
| default: |
| dev_info(dev, "mode %lx unsupported\n", irq_type); |
| return -EINVAL; |
| } |
| |
| ret = regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG4, |
| FXLS8962AF_SC4_INT_POL_MASK, |
| FXLS8962AF_SC4_INT_POL_PREP(irq_active_high)); |
| if (ret) |
| return ret; |
| |
| if (device_property_read_bool(dev, "drive-open-drain")) { |
| ret = regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG4, |
| FXLS8962AF_SC4_INT_PP_OD_MASK, |
| FXLS8962AF_SC4_INT_PP_OD_PREP(1)); |
| if (ret) |
| return ret; |
| |
| irq_type |= IRQF_SHARED; |
| } |
| |
| return devm_request_threaded_irq(dev, |
| irq, |
| NULL, fxls8962af_interrupt, |
| irq_type | IRQF_ONESHOT, |
| indio_dev->name, indio_dev); |
| } |
| |
| int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq) |
| { |
| struct fxls8962af_data *data; |
| struct iio_dev *indio_dev; |
| unsigned int reg; |
| int ret, i; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| dev_set_drvdata(dev, indio_dev); |
| data->regmap = regmap; |
| data->irq = irq; |
| |
| ret = iio_read_mount_matrix(dev, &data->orientation); |
| if (ret) |
| return ret; |
| |
| ret = devm_regulator_get_enable(dev, "vdd"); |
| if (ret) |
| return dev_err_probe(dev, ret, |
| "Failed to get vdd regulator\n"); |
| |
| ret = regmap_read(data->regmap, FXLS8962AF_WHO_AM_I, ®); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < ARRAY_SIZE(fxls_chip_info_table); i++) { |
| if (fxls_chip_info_table[i].chip_id == reg) { |
| data->chip_info = &fxls_chip_info_table[i]; |
| break; |
| } |
| } |
| if (i == ARRAY_SIZE(fxls_chip_info_table)) { |
| dev_err(dev, "failed to match device in table\n"); |
| return -ENXIO; |
| } |
| |
| indio_dev->channels = data->chip_info->channels; |
| indio_dev->num_channels = data->chip_info->num_channels; |
| indio_dev->name = data->chip_info->name; |
| indio_dev->info = &fxls8962af_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| ret = fxls8962af_reset(data); |
| if (ret) |
| return ret; |
| |
| if (irq) { |
| ret = fxls8962af_irq_setup(indio_dev, irq); |
| if (ret) |
| return ret; |
| |
| ret = devm_iio_kfifo_buffer_setup(dev, indio_dev, |
| &fxls8962af_buffer_ops); |
| if (ret) |
| return ret; |
| } |
| |
| ret = pm_runtime_set_active(dev); |
| if (ret) |
| return ret; |
| |
| pm_runtime_enable(dev); |
| pm_runtime_set_autosuspend_delay(dev, FXLS8962AF_AUTO_SUSPEND_DELAY_MS); |
| pm_runtime_use_autosuspend(dev); |
| |
| ret = devm_add_action_or_reset(dev, fxls8962af_pm_disable, dev); |
| if (ret) |
| return ret; |
| |
| if (device_property_read_bool(dev, "wakeup-source")) |
| device_init_wakeup(dev, true); |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| EXPORT_SYMBOL_NS_GPL(fxls8962af_core_probe, IIO_FXLS8962AF); |
| |
| static int fxls8962af_runtime_suspend(struct device *dev) |
| { |
| struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev)); |
| int ret; |
| |
| ret = fxls8962af_standby(data); |
| if (ret) { |
| dev_err(dev, "powering off device failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int fxls8962af_runtime_resume(struct device *dev) |
| { |
| struct fxls8962af_data *data = iio_priv(dev_get_drvdata(dev)); |
| |
| return fxls8962af_active(data); |
| } |
| |
| static int fxls8962af_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| |
| if (device_may_wakeup(dev) && data->enable_event) { |
| enable_irq_wake(data->irq); |
| |
| /* |
| * Disable buffer, as the buffer is so small the device will wake |
| * almost immediately. |
| */ |
| if (iio_buffer_enabled(indio_dev)) |
| fxls8962af_buffer_predisable(indio_dev); |
| } else { |
| fxls8962af_runtime_suspend(dev); |
| } |
| |
| return 0; |
| } |
| |
| static int fxls8962af_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| struct fxls8962af_data *data = iio_priv(indio_dev); |
| |
| if (device_may_wakeup(dev) && data->enable_event) { |
| disable_irq_wake(data->irq); |
| |
| if (iio_buffer_enabled(indio_dev)) |
| fxls8962af_buffer_postenable(indio_dev); |
| } else { |
| fxls8962af_runtime_resume(dev); |
| } |
| |
| return 0; |
| } |
| |
| EXPORT_NS_GPL_DEV_PM_OPS(fxls8962af_pm_ops, IIO_FXLS8962AF) = { |
| SYSTEM_SLEEP_PM_OPS(fxls8962af_suspend, fxls8962af_resume) |
| RUNTIME_PM_OPS(fxls8962af_runtime_suspend, fxls8962af_runtime_resume, NULL) |
| }; |
| |
| MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>"); |
| MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver"); |
| MODULE_LICENSE("GPL v2"); |