| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * include/linux/fsl_devices.h |
| * |
| * Definitions for any platform device related flags or structures for |
| * Freescale processor devices |
| * |
| * Maintainer: Kumar Gala <galak@kernel.crashing.org> |
| * |
| * Copyright 2004,2012 Freescale Semiconductor, Inc |
| */ |
| |
| #ifndef _FSL_DEVICE_H_ |
| #define _FSL_DEVICE_H_ |
| |
| #define FSL_UTMI_PHY_DLY 10 /*As per P1010RM, delay for UTMI |
| PHY CLK to become stable - 10ms*/ |
| #define FSL_USB_PHY_CLK_TIMEOUT 10000 /* uSec */ |
| |
| #include <linux/types.h> |
| |
| /* |
| * Some conventions on how we handle peripherals on Freescale chips |
| * |
| * unique device: a platform_device entry in fsl_plat_devs[] plus |
| * associated device information in its platform_data structure. |
| * |
| * A chip is described by a set of unique devices. |
| * |
| * Each sub-arch has its own master list of unique devices and |
| * enumerates them by enum fsl_devices in a sub-arch specific header |
| * |
| * The platform data structure is broken into two parts. The |
| * first is device specific information that help identify any |
| * unique features of a peripheral. The second is any |
| * information that may be defined by the board or how the device |
| * is connected externally of the chip. |
| * |
| * naming conventions: |
| * - platform data structures: <driver>_platform_data |
| * - platform data device flags: FSL_<driver>_DEV_<FLAG> |
| * - platform data board flags: FSL_<driver>_BRD_<FLAG> |
| * |
| */ |
| |
| enum fsl_usb2_controller_ver { |
| FSL_USB_VER_NONE = -1, |
| FSL_USB_VER_OLD = 0, |
| FSL_USB_VER_1_6 = 1, |
| FSL_USB_VER_2_2 = 2, |
| FSL_USB_VER_2_4 = 3, |
| FSL_USB_VER_2_5 = 4, |
| }; |
| |
| enum fsl_usb2_operating_modes { |
| FSL_USB2_MPH_HOST, |
| FSL_USB2_DR_HOST, |
| FSL_USB2_DR_DEVICE, |
| FSL_USB2_DR_OTG, |
| }; |
| |
| enum fsl_usb2_phy_modes { |
| FSL_USB2_PHY_NONE, |
| FSL_USB2_PHY_ULPI, |
| FSL_USB2_PHY_UTMI, |
| FSL_USB2_PHY_UTMI_WIDE, |
| FSL_USB2_PHY_SERIAL, |
| FSL_USB2_PHY_UTMI_DUAL, |
| }; |
| |
| struct clk; |
| struct platform_device; |
| |
| struct fsl_usb2_platform_data { |
| /* board specific information */ |
| enum fsl_usb2_controller_ver controller_ver; |
| enum fsl_usb2_operating_modes operating_mode; |
| enum fsl_usb2_phy_modes phy_mode; |
| unsigned int port_enables; |
| unsigned int workaround; |
| |
| int (*init)(struct platform_device *); |
| void (*exit)(struct platform_device *); |
| void __iomem *regs; /* ioremap'd register base */ |
| struct clk *clk; |
| unsigned power_budget; /* hcd->power_budget */ |
| unsigned big_endian_mmio:1; |
| unsigned big_endian_desc:1; |
| unsigned es:1; /* need USBMODE:ES */ |
| unsigned le_setup_buf:1; |
| unsigned have_sysif_regs:1; |
| unsigned invert_drvvbus:1; |
| unsigned invert_pwr_fault:1; |
| |
| unsigned suspended:1; |
| unsigned already_suspended:1; |
| unsigned has_fsl_erratum_a007792:1; |
| unsigned has_fsl_erratum_14:1; |
| unsigned has_fsl_erratum_a005275:1; |
| unsigned has_fsl_erratum_a005697:1; |
| unsigned has_fsl_erratum_a006918:1; |
| unsigned check_phy_clk_valid:1; |
| |
| /* register save area for suspend/resume */ |
| u32 pm_command; |
| u32 pm_status; |
| u32 pm_intr_enable; |
| u32 pm_frame_index; |
| u32 pm_segment; |
| u32 pm_frame_list; |
| u32 pm_async_next; |
| u32 pm_configured_flag; |
| u32 pm_portsc; |
| u32 pm_usbgenctrl; |
| }; |
| |
| /* Flags in fsl_usb2_mph_platform_data */ |
| #define FSL_USB2_PORT0_ENABLED 0x00000001 |
| #define FSL_USB2_PORT1_ENABLED 0x00000002 |
| |
| #define FLS_USB2_WORKAROUND_ENGCM09152 (1 << 0) |
| |
| struct spi_device; |
| |
| struct fsl_spi_platform_data { |
| u32 initial_spmode; /* initial SPMODE value */ |
| s16 bus_num; |
| unsigned int flags; |
| #define SPI_QE_CPU_MODE (1 << 0) /* QE CPU ("PIO") mode */ |
| #define SPI_CPM_MODE (1 << 1) /* CPM/QE ("DMA") mode */ |
| #define SPI_CPM1 (1 << 2) /* SPI unit is in CPM1 block */ |
| #define SPI_CPM2 (1 << 3) /* SPI unit is in CPM2 block */ |
| #define SPI_QE (1 << 4) /* SPI unit is in QE block */ |
| /* board specific information */ |
| u16 max_chipselect; |
| void (*cs_control)(struct spi_device *spi, bool on); |
| u32 sysclk; |
| }; |
| |
| struct mpc8xx_pcmcia_ops { |
| void(*hw_ctrl)(int slot, int enable); |
| int(*voltage_set)(int slot, int vcc, int vpp); |
| }; |
| |
| /* Returns non-zero if the current suspend operation would |
| * lead to a deep sleep (i.e. power removed from the core, |
| * instead of just the clock). |
| */ |
| #if defined(CONFIG_PPC_83xx) && defined(CONFIG_SUSPEND) |
| int fsl_deep_sleep(void); |
| #else |
| static inline int fsl_deep_sleep(void) { return 0; } |
| #endif |
| |
| #endif /* _FSL_DEVICE_H_ */ |