| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) |
| // |
| // This file is provided under a dual BSD/GPLv2 license. When using or |
| // redistributing this file, you may do so under either license. |
| // |
| // Copyright(c) 2018 Intel Corporation. All rights reserved. |
| // |
| // Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> |
| // |
| |
| #include <linux/firmware.h> |
| #include <linux/dmi.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/pm_runtime.h> |
| #include <sound/soc-acpi.h> |
| #include <sound/soc-acpi-intel-match.h> |
| #include <sound/sof.h> |
| #include "ops.h" |
| #include "sof-pci-dev.h" |
| |
| static char *fw_path; |
| module_param(fw_path, charp, 0444); |
| MODULE_PARM_DESC(fw_path, "alternate path for SOF firmware."); |
| |
| static char *tplg_path; |
| module_param(tplg_path, charp, 0444); |
| MODULE_PARM_DESC(tplg_path, "alternate path for SOF topology."); |
| |
| static int sof_pci_debug; |
| module_param_named(sof_pci_debug, sof_pci_debug, int, 0444); |
| MODULE_PARM_DESC(sof_pci_debug, "SOF PCI debug options (0x0 all off)"); |
| |
| static const char *sof_override_tplg_name; |
| |
| #define SOF_PCI_DISABLE_PM_RUNTIME BIT(0) |
| |
| static int sof_tplg_cb(const struct dmi_system_id *id) |
| { |
| sof_override_tplg_name = id->driver_data; |
| return 1; |
| } |
| |
| static const struct dmi_system_id sof_tplg_table[] = { |
| { |
| .callback = sof_tplg_cb, |
| .matches = { |
| DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Volteer"), |
| DMI_MATCH(DMI_OEM_STRING, "AUDIO-MAX98373_ALC5682I_I2S_UP4"), |
| }, |
| .driver_data = "sof-tgl-rt5682-ssp0-max98373-ssp2.tplg", |
| }, |
| { |
| .callback = sof_tplg_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alder Lake Client Platform"), |
| DMI_MATCH(DMI_OEM_STRING, "AUDIO-ADL_MAX98373_ALC5682I_I2S"), |
| }, |
| .driver_data = "sof-adl-rt5682-ssp0-max98373-ssp2.tplg", |
| }, |
| { |
| .callback = sof_tplg_cb, |
| .matches = { |
| DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Brya"), |
| DMI_MATCH(DMI_OEM_STRING, "AUDIO-MAX98390_ALC5682I_I2S"), |
| }, |
| .driver_data = "sof-adl-max98390-ssp2-rt5682-ssp0.tplg", |
| }, |
| { |
| .callback = sof_tplg_cb, |
| .matches = { |
| DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Brya"), |
| DMI_MATCH(DMI_OEM_STRING, "AUDIO_AMP-MAX98360_ALC5682VS_I2S_2WAY"), |
| }, |
| .driver_data = "sof-adl-max98360a-rt5682-2way.tplg", |
| }, |
| { |
| .callback = sof_tplg_cb, |
| .matches = { |
| DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Brya"), |
| DMI_MATCH(DMI_OEM_STRING, "AUDIO-AUDIO_MAX98357_ALC5682I_I2S_2WAY"), |
| }, |
| .driver_data = "sof-adl-max98357a-rt5682-2way.tplg", |
| }, |
| |
| {} |
| }; |
| |
| static const struct dmi_system_id community_key_platforms[] = { |
| { |
| .ident = "Up boards", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "AAEON"), |
| } |
| }, |
| { |
| .ident = "Google Chromebooks", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Google"), |
| } |
| }, |
| {}, |
| }; |
| |
| const struct dev_pm_ops sof_pci_pm = { |
| .prepare = snd_sof_prepare, |
| .complete = snd_sof_complete, |
| SET_SYSTEM_SLEEP_PM_OPS(snd_sof_suspend, snd_sof_resume) |
| SET_RUNTIME_PM_OPS(snd_sof_runtime_suspend, snd_sof_runtime_resume, |
| snd_sof_runtime_idle) |
| }; |
| EXPORT_SYMBOL_NS(sof_pci_pm, SND_SOC_SOF_PCI_DEV); |
| |
| static void sof_pci_probe_complete(struct device *dev) |
| { |
| dev_dbg(dev, "Completing SOF PCI probe"); |
| |
| if (sof_pci_debug & SOF_PCI_DISABLE_PM_RUNTIME) |
| return; |
| |
| /* allow runtime_pm */ |
| pm_runtime_set_autosuspend_delay(dev, SND_SOF_SUSPEND_DELAY_MS); |
| pm_runtime_use_autosuspend(dev); |
| |
| /* |
| * runtime pm for pci device is "forbidden" by default. |
| * so call pm_runtime_allow() to enable it. |
| */ |
| pm_runtime_allow(dev); |
| |
| /* mark last_busy for pm_runtime to make sure not suspend immediately */ |
| pm_runtime_mark_last_busy(dev); |
| |
| /* follow recommendation in pci-driver.c to decrement usage counter */ |
| pm_runtime_put_noidle(dev); |
| } |
| |
| int sof_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) |
| { |
| struct device *dev = &pci->dev; |
| const struct sof_dev_desc *desc = |
| (const struct sof_dev_desc *)pci_id->driver_data; |
| struct snd_sof_pdata *sof_pdata; |
| int ret; |
| |
| dev_dbg(&pci->dev, "PCI DSP detected"); |
| |
| if (!desc->ops) { |
| dev_err(dev, "error: no matching PCI descriptor ops\n"); |
| return -ENODEV; |
| } |
| |
| sof_pdata = devm_kzalloc(dev, sizeof(*sof_pdata), GFP_KERNEL); |
| if (!sof_pdata) |
| return -ENOMEM; |
| |
| ret = pcim_enable_device(pci); |
| if (ret < 0) |
| return ret; |
| |
| ret = pci_request_regions(pci, "Audio DSP"); |
| if (ret < 0) |
| return ret; |
| |
| sof_pdata->name = pci_name(pci); |
| sof_pdata->desc = desc; |
| sof_pdata->dev = dev; |
| sof_pdata->fw_filename = desc->default_fw_filename; |
| |
| /* |
| * for platforms using the SOF community key, change the |
| * default path automatically to pick the right files from the |
| * linux-firmware tree. This can be overridden with the |
| * fw_path kernel parameter, e.g. for developers. |
| */ |
| |
| /* alternate fw and tplg filenames ? */ |
| if (fw_path) { |
| sof_pdata->fw_filename_prefix = fw_path; |
| |
| dev_dbg(dev, |
| "Module parameter used, changed fw path to %s\n", |
| sof_pdata->fw_filename_prefix); |
| |
| } else if (dmi_check_system(community_key_platforms)) { |
| sof_pdata->fw_filename_prefix = |
| devm_kasprintf(dev, GFP_KERNEL, "%s/%s", |
| sof_pdata->desc->default_fw_path, |
| "community"); |
| |
| dev_dbg(dev, |
| "Platform uses community key, changed fw path to %s\n", |
| sof_pdata->fw_filename_prefix); |
| } else { |
| sof_pdata->fw_filename_prefix = |
| sof_pdata->desc->default_fw_path; |
| } |
| |
| if (tplg_path) |
| sof_pdata->tplg_filename_prefix = tplg_path; |
| else |
| sof_pdata->tplg_filename_prefix = |
| sof_pdata->desc->default_tplg_path; |
| |
| dmi_check_system(sof_tplg_table); |
| if (sof_override_tplg_name) |
| sof_pdata->tplg_filename = sof_override_tplg_name; |
| |
| /* set callback to be called on successful device probe to enable runtime_pm */ |
| sof_pdata->sof_probe_complete = sof_pci_probe_complete; |
| |
| /* call sof helper for DSP hardware probe */ |
| ret = snd_sof_device_probe(dev, sof_pdata); |
| if (ret) |
| pci_release_regions(pci); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_NS(sof_pci_probe, SND_SOC_SOF_PCI_DEV); |
| |
| void sof_pci_remove(struct pci_dev *pci) |
| { |
| /* call sof helper for DSP hardware remove */ |
| snd_sof_device_remove(&pci->dev); |
| |
| /* follow recommendation in pci-driver.c to increment usage counter */ |
| if (snd_sof_device_probe_completed(&pci->dev) && |
| !(sof_pci_debug & SOF_PCI_DISABLE_PM_RUNTIME)) |
| pm_runtime_get_noresume(&pci->dev); |
| |
| /* release pci regions and disable device */ |
| pci_release_regions(pci); |
| } |
| EXPORT_SYMBOL_NS(sof_pci_remove, SND_SOC_SOF_PCI_DEV); |
| |
| void sof_pci_shutdown(struct pci_dev *pci) |
| { |
| snd_sof_device_shutdown(&pci->dev); |
| } |
| EXPORT_SYMBOL_NS(sof_pci_shutdown, SND_SOC_SOF_PCI_DEV); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |