| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * System Control and Management Interface (SCMI) Message Protocol driver |
| * |
| * SCMI Message Protocol is used between the System Control Processor(SCP) |
| * and the Application Processors(AP). The Message Handling Unit(MHU) |
| * provides a mechanism for inter-processor communication between SCP's |
| * Cortex M3 and AP. |
| * |
| * SCP offers control and management of the core/cluster power states, |
| * various power domain DVFS including the core/cluster, certain system |
| * clocks configuration, thermal sensors and many others. |
| * |
| * Copyright (C) 2018-2024 ARM Ltd. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/bitmap.h> |
| #include <linux/debugfs.h> |
| #include <linux/device.h> |
| #include <linux/export.h> |
| #include <linux/idr.h> |
| #include <linux/io.h> |
| #include <linux/io-64-nonatomic-hi-lo.h> |
| #include <linux/kernel.h> |
| #include <linux/ktime.h> |
| #include <linux/hashtable.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/processor.h> |
| #include <linux/refcount.h> |
| #include <linux/slab.h> |
| #include <linux/xarray.h> |
| |
| #include "common.h" |
| #include "notify.h" |
| |
| #include "raw_mode.h" |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/scmi.h> |
| |
| static DEFINE_IDA(scmi_id); |
| |
| static DEFINE_XARRAY(scmi_protocols); |
| |
| /* List of all SCMI devices active in system */ |
| static LIST_HEAD(scmi_list); |
| /* Protection for the entire list */ |
| static DEFINE_MUTEX(scmi_list_mutex); |
| /* Track the unique id for the transfers for debug & profiling purpose */ |
| static atomic_t transfer_last_id; |
| |
| static struct dentry *scmi_top_dentry; |
| |
| /** |
| * struct scmi_xfers_info - Structure to manage transfer information |
| * |
| * @xfer_alloc_table: Bitmap table for allocated messages. |
| * Index of this bitmap table is also used for message |
| * sequence identifier. |
| * @xfer_lock: Protection for message allocation |
| * @max_msg: Maximum number of messages that can be pending |
| * @free_xfers: A free list for available to use xfers. It is initialized with |
| * a number of xfers equal to the maximum allowed in-flight |
| * messages. |
| * @pending_xfers: An hashtable, indexed by msg_hdr.seq, used to keep all the |
| * currently in-flight messages. |
| */ |
| struct scmi_xfers_info { |
| unsigned long *xfer_alloc_table; |
| spinlock_t xfer_lock; |
| int max_msg; |
| struct hlist_head free_xfers; |
| DECLARE_HASHTABLE(pending_xfers, SCMI_PENDING_XFERS_HT_ORDER_SZ); |
| }; |
| |
| /** |
| * struct scmi_protocol_instance - Describe an initialized protocol instance. |
| * @handle: Reference to the SCMI handle associated to this protocol instance. |
| * @proto: A reference to the protocol descriptor. |
| * @gid: A reference for per-protocol devres management. |
| * @users: A refcount to track effective users of this protocol. |
| * @priv: Reference for optional protocol private data. |
| * @version: Protocol version supported by the platform as detected at runtime. |
| * @negotiated_version: When the platform supports a newer protocol version, |
| * the agent will try to negotiate with the platform the |
| * usage of the newest version known to it, since |
| * backward compatibility is NOT automatically assured. |
| * This field is NON-zero when a successful negotiation |
| * has completed. |
| * @ph: An embedded protocol handle that will be passed down to protocol |
| * initialization code to identify this instance. |
| * |
| * Each protocol is initialized independently once for each SCMI platform in |
| * which is defined by DT and implemented by the SCMI server fw. |
| */ |
| struct scmi_protocol_instance { |
| const struct scmi_handle *handle; |
| const struct scmi_protocol *proto; |
| void *gid; |
| refcount_t users; |
| void *priv; |
| unsigned int version; |
| unsigned int negotiated_version; |
| struct scmi_protocol_handle ph; |
| }; |
| |
| #define ph_to_pi(h) container_of(h, struct scmi_protocol_instance, ph) |
| |
| /** |
| * struct scmi_debug_info - Debug common info |
| * @top_dentry: A reference to the top debugfs dentry |
| * @name: Name of this SCMI instance |
| * @type: Type of this SCMI instance |
| * @is_atomic: Flag to state if the transport of this instance is atomic |
| * @counters: An array of atomic_c's used for tracking statistics (if enabled) |
| */ |
| struct scmi_debug_info { |
| struct dentry *top_dentry; |
| const char *name; |
| const char *type; |
| bool is_atomic; |
| atomic_t counters[SCMI_DEBUG_COUNTERS_LAST]; |
| }; |
| |
| /** |
| * struct scmi_info - Structure representing a SCMI instance |
| * |
| * @id: A sequence number starting from zero identifying this instance |
| * @dev: Device pointer |
| * @desc: SoC description for this instance |
| * @version: SCMI revision information containing protocol version, |
| * implementation version and (sub-)vendor identification. |
| * @handle: Instance of SCMI handle to send to clients |
| * @tx_minfo: Universal Transmit Message management info |
| * @rx_minfo: Universal Receive Message management info |
| * @tx_idr: IDR object to map protocol id to Tx channel info pointer |
| * @rx_idr: IDR object to map protocol id to Rx channel info pointer |
| * @protocols: IDR for protocols' instance descriptors initialized for |
| * this SCMI instance: populated on protocol's first attempted |
| * usage. |
| * @protocols_mtx: A mutex to protect protocols instances initialization. |
| * @protocols_imp: List of protocols implemented, currently maximum of |
| * scmi_revision_info.num_protocols elements allocated by the |
| * base protocol |
| * @active_protocols: IDR storing device_nodes for protocols actually defined |
| * in the DT and confirmed as implemented by fw. |
| * @atomic_threshold: Optional system wide DT-configured threshold, expressed |
| * in microseconds, for atomic operations. |
| * Only SCMI synchronous commands reported by the platform |
| * to have an execution latency lesser-equal to the threshold |
| * should be considered for atomic mode operation: such |
| * decision is finally left up to the SCMI drivers. |
| * @notify_priv: Pointer to private data structure specific to notifications. |
| * @node: List head |
| * @users: Number of users of this instance |
| * @bus_nb: A notifier to listen for device bind/unbind on the scmi bus |
| * @dev_req_nb: A notifier to listen for device request/unrequest on the scmi |
| * bus |
| * @devreq_mtx: A mutex to serialize device creation for this SCMI instance |
| * @dbg: A pointer to debugfs related data (if any) |
| * @raw: An opaque reference handle used by SCMI Raw mode. |
| */ |
| struct scmi_info { |
| int id; |
| struct device *dev; |
| const struct scmi_desc *desc; |
| struct scmi_revision_info version; |
| struct scmi_handle handle; |
| struct scmi_xfers_info tx_minfo; |
| struct scmi_xfers_info rx_minfo; |
| struct idr tx_idr; |
| struct idr rx_idr; |
| struct idr protocols; |
| /* Ensure mutual exclusive access to protocols instance array */ |
| struct mutex protocols_mtx; |
| u8 *protocols_imp; |
| struct idr active_protocols; |
| unsigned int atomic_threshold; |
| void *notify_priv; |
| struct list_head node; |
| int users; |
| struct notifier_block bus_nb; |
| struct notifier_block dev_req_nb; |
| /* Serialize device creation process for this instance */ |
| struct mutex devreq_mtx; |
| struct scmi_debug_info *dbg; |
| void *raw; |
| }; |
| |
| #define handle_to_scmi_info(h) container_of(h, struct scmi_info, handle) |
| #define bus_nb_to_scmi_info(nb) container_of(nb, struct scmi_info, bus_nb) |
| #define req_nb_to_scmi_info(nb) container_of(nb, struct scmi_info, dev_req_nb) |
| |
| static void scmi_rx_callback(struct scmi_chan_info *cinfo, |
| u32 msg_hdr, void *priv); |
| static void scmi_bad_message_trace(struct scmi_chan_info *cinfo, |
| u32 msg_hdr, enum scmi_bad_msg err); |
| |
| static struct scmi_transport_core_operations scmi_trans_core_ops = { |
| .bad_message_trace = scmi_bad_message_trace, |
| .rx_callback = scmi_rx_callback, |
| }; |
| |
| static unsigned long |
| scmi_vendor_protocol_signature(unsigned int protocol_id, char *vendor_id, |
| char *sub_vendor_id, u32 impl_ver) |
| { |
| char *signature, *p; |
| unsigned long hash = 0; |
| |
| /* vendor_id/sub_vendor_id guaranteed <= SCMI_SHORT_NAME_MAX_SIZE */ |
| signature = kasprintf(GFP_KERNEL, "%02X|%s|%s|0x%08X", protocol_id, |
| vendor_id ?: "", sub_vendor_id ?: "", impl_ver); |
| if (!signature) |
| return 0; |
| |
| p = signature; |
| while (*p) |
| hash = partial_name_hash(tolower(*p++), hash); |
| hash = end_name_hash(hash); |
| |
| kfree(signature); |
| |
| return hash; |
| } |
| |
| static unsigned long |
| scmi_protocol_key_calculate(int protocol_id, char *vendor_id, |
| char *sub_vendor_id, u32 impl_ver) |
| { |
| if (protocol_id < SCMI_PROTOCOL_VENDOR_BASE) |
| return protocol_id; |
| else |
| return scmi_vendor_protocol_signature(protocol_id, vendor_id, |
| sub_vendor_id, impl_ver); |
| } |
| |
| static const struct scmi_protocol * |
| __scmi_vendor_protocol_lookup(int protocol_id, char *vendor_id, |
| char *sub_vendor_id, u32 impl_ver) |
| { |
| unsigned long key; |
| struct scmi_protocol *proto = NULL; |
| |
| key = scmi_protocol_key_calculate(protocol_id, vendor_id, |
| sub_vendor_id, impl_ver); |
| if (key) |
| proto = xa_load(&scmi_protocols, key); |
| |
| return proto; |
| } |
| |
| static const struct scmi_protocol * |
| scmi_vendor_protocol_lookup(int protocol_id, char *vendor_id, |
| char *sub_vendor_id, u32 impl_ver) |
| { |
| const struct scmi_protocol *proto = NULL; |
| |
| /* Searching for closest match ...*/ |
| proto = __scmi_vendor_protocol_lookup(protocol_id, vendor_id, |
| sub_vendor_id, impl_ver); |
| if (proto) |
| return proto; |
| |
| /* Any match just on vendor/sub_vendor ? */ |
| if (impl_ver) { |
| proto = __scmi_vendor_protocol_lookup(protocol_id, vendor_id, |
| sub_vendor_id, 0); |
| if (proto) |
| return proto; |
| } |
| |
| /* Any match just on the vendor ? */ |
| if (sub_vendor_id) |
| proto = __scmi_vendor_protocol_lookup(protocol_id, vendor_id, |
| NULL, 0); |
| return proto; |
| } |
| |
| static const struct scmi_protocol * |
| scmi_protocol_get(int protocol_id, struct scmi_revision_info *version) |
| { |
| const struct scmi_protocol *proto = NULL; |
| |
| if (protocol_id < SCMI_PROTOCOL_VENDOR_BASE) |
| proto = xa_load(&scmi_protocols, protocol_id); |
| else |
| proto = scmi_vendor_protocol_lookup(protocol_id, |
| version->vendor_id, |
| version->sub_vendor_id, |
| version->impl_ver); |
| if (!proto || !try_module_get(proto->owner)) { |
| pr_warn("SCMI Protocol 0x%x not found!\n", protocol_id); |
| return NULL; |
| } |
| |
| pr_debug("Found SCMI Protocol 0x%x\n", protocol_id); |
| |
| if (protocol_id >= SCMI_PROTOCOL_VENDOR_BASE) |
| pr_info("Loaded SCMI Vendor Protocol 0x%x - %s %s %X\n", |
| protocol_id, proto->vendor_id ?: "", |
| proto->sub_vendor_id ?: "", proto->impl_ver); |
| |
| return proto; |
| } |
| |
| static void scmi_protocol_put(const struct scmi_protocol *proto) |
| { |
| if (proto) |
| module_put(proto->owner); |
| } |
| |
| static int scmi_vendor_protocol_check(const struct scmi_protocol *proto) |
| { |
| if (!proto->vendor_id) { |
| pr_err("missing vendor_id for protocol 0x%x\n", proto->id); |
| return -EINVAL; |
| } |
| |
| if (strlen(proto->vendor_id) >= SCMI_SHORT_NAME_MAX_SIZE) { |
| pr_err("malformed vendor_id for protocol 0x%x\n", proto->id); |
| return -EINVAL; |
| } |
| |
| if (proto->sub_vendor_id && |
| strlen(proto->sub_vendor_id) >= SCMI_SHORT_NAME_MAX_SIZE) { |
| pr_err("malformed sub_vendor_id for protocol 0x%x\n", |
| proto->id); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int scmi_protocol_register(const struct scmi_protocol *proto) |
| { |
| int ret; |
| unsigned long key; |
| |
| if (!proto) { |
| pr_err("invalid protocol\n"); |
| return -EINVAL; |
| } |
| |
| if (!proto->instance_init) { |
| pr_err("missing init for protocol 0x%x\n", proto->id); |
| return -EINVAL; |
| } |
| |
| if (proto->id >= SCMI_PROTOCOL_VENDOR_BASE && |
| scmi_vendor_protocol_check(proto)) |
| return -EINVAL; |
| |
| /* |
| * Calculate a protocol key to register this protocol with the core; |
| * key value 0 is considered invalid. |
| */ |
| key = scmi_protocol_key_calculate(proto->id, proto->vendor_id, |
| proto->sub_vendor_id, |
| proto->impl_ver); |
| if (!key) |
| return -EINVAL; |
| |
| ret = xa_insert(&scmi_protocols, key, (void *)proto, GFP_KERNEL); |
| if (ret) { |
| pr_err("unable to allocate SCMI protocol slot for 0x%x - err %d\n", |
| proto->id, ret); |
| return ret; |
| } |
| |
| pr_debug("Registered SCMI Protocol 0x%x\n", proto->id); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(scmi_protocol_register); |
| |
| void scmi_protocol_unregister(const struct scmi_protocol *proto) |
| { |
| unsigned long key; |
| |
| key = scmi_protocol_key_calculate(proto->id, proto->vendor_id, |
| proto->sub_vendor_id, |
| proto->impl_ver); |
| if (!key) |
| return; |
| |
| xa_erase(&scmi_protocols, key); |
| |
| pr_debug("Unregistered SCMI Protocol 0x%x\n", proto->id); |
| } |
| EXPORT_SYMBOL_GPL(scmi_protocol_unregister); |
| |
| /** |
| * scmi_create_protocol_devices - Create devices for all pending requests for |
| * this SCMI instance. |
| * |
| * @np: The device node describing the protocol |
| * @info: The SCMI instance descriptor |
| * @prot_id: The protocol ID |
| * @name: The optional name of the device to be created: if not provided this |
| * call will lead to the creation of all the devices currently requested |
| * for the specified protocol. |
| */ |
| static void scmi_create_protocol_devices(struct device_node *np, |
| struct scmi_info *info, |
| int prot_id, const char *name) |
| { |
| struct scmi_device *sdev; |
| |
| mutex_lock(&info->devreq_mtx); |
| sdev = scmi_device_create(np, info->dev, prot_id, name); |
| if (name && !sdev) |
| dev_err(info->dev, |
| "failed to create device for protocol 0x%X (%s)\n", |
| prot_id, name); |
| mutex_unlock(&info->devreq_mtx); |
| } |
| |
| static void scmi_destroy_protocol_devices(struct scmi_info *info, |
| int prot_id, const char *name) |
| { |
| mutex_lock(&info->devreq_mtx); |
| scmi_device_destroy(info->dev, prot_id, name); |
| mutex_unlock(&info->devreq_mtx); |
| } |
| |
| void scmi_notification_instance_data_set(const struct scmi_handle *handle, |
| void *priv) |
| { |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| info->notify_priv = priv; |
| /* Ensure updated protocol private date are visible */ |
| smp_wmb(); |
| } |
| |
| void *scmi_notification_instance_data_get(const struct scmi_handle *handle) |
| { |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| /* Ensure protocols_private_data has been updated */ |
| smp_rmb(); |
| return info->notify_priv; |
| } |
| |
| /** |
| * scmi_xfer_token_set - Reserve and set new token for the xfer at hand |
| * |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * @xfer: The xfer to act upon |
| * |
| * Pick the next unused monotonically increasing token and set it into |
| * xfer->hdr.seq: picking a monotonically increasing value avoids immediate |
| * reuse of freshly completed or timed-out xfers, thus mitigating the risk |
| * of incorrect association of a late and expired xfer with a live in-flight |
| * transaction, both happening to re-use the same token identifier. |
| * |
| * Since platform is NOT required to answer our request in-order we should |
| * account for a few rare but possible scenarios: |
| * |
| * - exactly 'next_token' may be NOT available so pick xfer_id >= next_token |
| * using find_next_zero_bit() starting from candidate next_token bit |
| * |
| * - all tokens ahead upto (MSG_TOKEN_ID_MASK - 1) are used in-flight but we |
| * are plenty of free tokens at start, so try a second pass using |
| * find_next_zero_bit() and starting from 0. |
| * |
| * X = used in-flight |
| * |
| * Normal |
| * ------ |
| * |
| * |- xfer_id picked |
| * -----------+---------------------------------------------------------- |
| * | | |X|X|X| | | | | | ... ... ... ... ... ... ... ... ... ... ...|X|X| |
| * ---------------------------------------------------------------------- |
| * ^ |
| * |- next_token |
| * |
| * Out-of-order pending at start |
| * ----------------------------- |
| * |
| * |- xfer_id picked, last_token fixed |
| * -----+---------------------------------------------------------------- |
| * |X|X| | | | |X|X| ... ... ... ... ... ... ... ... ... ... ... ...|X| | |
| * ---------------------------------------------------------------------- |
| * ^ |
| * |- next_token |
| * |
| * |
| * Out-of-order pending at end |
| * --------------------------- |
| * |
| * |- xfer_id picked, last_token fixed |
| * -----+---------------------------------------------------------------- |
| * |X|X| | | | |X|X| ... ... ... ... ... ... ... ... ... ... |X|X|X||X|X| |
| * ---------------------------------------------------------------------- |
| * ^ |
| * |- next_token |
| * |
| * Context: Assumes to be called with @xfer_lock already acquired. |
| * |
| * Return: 0 on Success or error |
| */ |
| static int scmi_xfer_token_set(struct scmi_xfers_info *minfo, |
| struct scmi_xfer *xfer) |
| { |
| unsigned long xfer_id, next_token; |
| |
| /* |
| * Pick a candidate monotonic token in range [0, MSG_TOKEN_MAX - 1] |
| * using the pre-allocated transfer_id as a base. |
| * Note that the global transfer_id is shared across all message types |
| * so there could be holes in the allocated set of monotonic sequence |
| * numbers, but that is going to limit the effectiveness of the |
| * mitigation only in very rare limit conditions. |
| */ |
| next_token = (xfer->transfer_id & (MSG_TOKEN_MAX - 1)); |
| |
| /* Pick the next available xfer_id >= next_token */ |
| xfer_id = find_next_zero_bit(minfo->xfer_alloc_table, |
| MSG_TOKEN_MAX, next_token); |
| if (xfer_id == MSG_TOKEN_MAX) { |
| /* |
| * After heavily out-of-order responses, there are no free |
| * tokens ahead, but only at start of xfer_alloc_table so |
| * try again from the beginning. |
| */ |
| xfer_id = find_next_zero_bit(minfo->xfer_alloc_table, |
| MSG_TOKEN_MAX, 0); |
| /* |
| * Something is wrong if we got here since there can be a |
| * maximum number of (MSG_TOKEN_MAX - 1) in-flight messages |
| * but we have not found any free token [0, MSG_TOKEN_MAX - 1]. |
| */ |
| if (WARN_ON_ONCE(xfer_id == MSG_TOKEN_MAX)) |
| return -ENOMEM; |
| } |
| |
| /* Update +/- last_token accordingly if we skipped some hole */ |
| if (xfer_id != next_token) |
| atomic_add((int)(xfer_id - next_token), &transfer_last_id); |
| |
| xfer->hdr.seq = (u16)xfer_id; |
| |
| return 0; |
| } |
| |
| /** |
| * scmi_xfer_token_clear - Release the token |
| * |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * @xfer: The xfer to act upon |
| */ |
| static inline void scmi_xfer_token_clear(struct scmi_xfers_info *minfo, |
| struct scmi_xfer *xfer) |
| { |
| clear_bit(xfer->hdr.seq, minfo->xfer_alloc_table); |
| } |
| |
| /** |
| * scmi_xfer_inflight_register_unlocked - Register the xfer as in-flight |
| * |
| * @xfer: The xfer to register |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * |
| * Note that this helper assumes that the xfer to be registered as in-flight |
| * had been built using an xfer sequence number which still corresponds to a |
| * free slot in the xfer_alloc_table. |
| * |
| * Context: Assumes to be called with @xfer_lock already acquired. |
| */ |
| static inline void |
| scmi_xfer_inflight_register_unlocked(struct scmi_xfer *xfer, |
| struct scmi_xfers_info *minfo) |
| { |
| /* Set in-flight */ |
| set_bit(xfer->hdr.seq, minfo->xfer_alloc_table); |
| hash_add(minfo->pending_xfers, &xfer->node, xfer->hdr.seq); |
| xfer->pending = true; |
| } |
| |
| /** |
| * scmi_xfer_inflight_register - Try to register an xfer as in-flight |
| * |
| * @xfer: The xfer to register |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * |
| * Note that this helper does NOT assume anything about the sequence number |
| * that was baked into the provided xfer, so it checks at first if it can |
| * be mapped to a free slot and fails with an error if another xfer with the |
| * same sequence number is currently still registered as in-flight. |
| * |
| * Return: 0 on Success or -EBUSY if sequence number embedded in the xfer |
| * could not rbe mapped to a free slot in the xfer_alloc_table. |
| */ |
| static int scmi_xfer_inflight_register(struct scmi_xfer *xfer, |
| struct scmi_xfers_info *minfo) |
| { |
| int ret = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&minfo->xfer_lock, flags); |
| if (!test_bit(xfer->hdr.seq, minfo->xfer_alloc_table)) |
| scmi_xfer_inflight_register_unlocked(xfer, minfo); |
| else |
| ret = -EBUSY; |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_xfer_raw_inflight_register - An helper to register the given xfer as in |
| * flight on the TX channel, if possible. |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @xfer: The xfer to register |
| * |
| * Return: 0 on Success, error otherwise |
| */ |
| int scmi_xfer_raw_inflight_register(const struct scmi_handle *handle, |
| struct scmi_xfer *xfer) |
| { |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| return scmi_xfer_inflight_register(xfer, &info->tx_minfo); |
| } |
| |
| /** |
| * scmi_xfer_pending_set - Pick a proper sequence number and mark the xfer |
| * as pending in-flight |
| * |
| * @xfer: The xfer to act upon |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * |
| * Return: 0 on Success or error otherwise |
| */ |
| static inline int scmi_xfer_pending_set(struct scmi_xfer *xfer, |
| struct scmi_xfers_info *minfo) |
| { |
| int ret; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&minfo->xfer_lock, flags); |
| /* Set a new monotonic token as the xfer sequence number */ |
| ret = scmi_xfer_token_set(minfo, xfer); |
| if (!ret) |
| scmi_xfer_inflight_register_unlocked(xfer, minfo); |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_xfer_get() - Allocate one message |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * |
| * Helper function which is used by various message functions that are |
| * exposed to clients of this driver for allocating a message traffic event. |
| * |
| * Picks an xfer from the free list @free_xfers (if any available) and perform |
| * a basic initialization. |
| * |
| * Note that, at this point, still no sequence number is assigned to the |
| * allocated xfer, nor it is registered as a pending transaction. |
| * |
| * The successfully initialized xfer is refcounted. |
| * |
| * Context: Holds @xfer_lock while manipulating @free_xfers. |
| * |
| * Return: An initialized xfer if all went fine, else pointer error. |
| */ |
| static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle, |
| struct scmi_xfers_info *minfo) |
| { |
| unsigned long flags; |
| struct scmi_xfer *xfer; |
| |
| spin_lock_irqsave(&minfo->xfer_lock, flags); |
| if (hlist_empty(&minfo->free_xfers)) { |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| /* grab an xfer from the free_list */ |
| xfer = hlist_entry(minfo->free_xfers.first, struct scmi_xfer, node); |
| hlist_del_init(&xfer->node); |
| |
| /* |
| * Allocate transfer_id early so that can be used also as base for |
| * monotonic sequence number generation if needed. |
| */ |
| xfer->transfer_id = atomic_inc_return(&transfer_last_id); |
| |
| refcount_set(&xfer->users, 1); |
| atomic_set(&xfer->busy, SCMI_XFER_FREE); |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| |
| return xfer; |
| } |
| |
| /** |
| * scmi_xfer_raw_get - Helper to get a bare free xfer from the TX channel |
| * |
| * @handle: Pointer to SCMI entity handle |
| * |
| * Note that xfer is taken from the TX channel structures. |
| * |
| * Return: A valid xfer on Success, or an error-pointer otherwise |
| */ |
| struct scmi_xfer *scmi_xfer_raw_get(const struct scmi_handle *handle) |
| { |
| struct scmi_xfer *xfer; |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| xfer = scmi_xfer_get(handle, &info->tx_minfo); |
| if (!IS_ERR(xfer)) |
| xfer->flags |= SCMI_XFER_FLAG_IS_RAW; |
| |
| return xfer; |
| } |
| |
| /** |
| * scmi_xfer_raw_channel_get - Helper to get a reference to the proper channel |
| * to use for a specific protocol_id Raw transaction. |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @protocol_id: Identifier of the protocol |
| * |
| * Note that in a regular SCMI stack, usually, a protocol has to be defined in |
| * the DT to have an associated channel and be usable; but in Raw mode any |
| * protocol in range is allowed, re-using the Base channel, so as to enable |
| * fuzzing on any protocol without the need of a fully compiled DT. |
| * |
| * Return: A reference to the channel to use, or an ERR_PTR |
| */ |
| struct scmi_chan_info * |
| scmi_xfer_raw_channel_get(const struct scmi_handle *handle, u8 protocol_id) |
| { |
| struct scmi_chan_info *cinfo; |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| cinfo = idr_find(&info->tx_idr, protocol_id); |
| if (!cinfo) { |
| if (protocol_id == SCMI_PROTOCOL_BASE) |
| return ERR_PTR(-EINVAL); |
| /* Use Base channel for protocols not defined for DT */ |
| cinfo = idr_find(&info->tx_idr, SCMI_PROTOCOL_BASE); |
| if (!cinfo) |
| return ERR_PTR(-EINVAL); |
| dev_warn_once(handle->dev, |
| "Using Base channel for protocol 0x%X\n", |
| protocol_id); |
| } |
| |
| return cinfo; |
| } |
| |
| /** |
| * __scmi_xfer_put() - Release a message |
| * |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * @xfer: message that was reserved by scmi_xfer_get |
| * |
| * After refcount check, possibly release an xfer, clearing the token slot, |
| * removing xfer from @pending_xfers and putting it back into free_xfers. |
| * |
| * This holds a spinlock to maintain integrity of internal data structures. |
| */ |
| static void |
| __scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&minfo->xfer_lock, flags); |
| if (refcount_dec_and_test(&xfer->users)) { |
| if (xfer->pending) { |
| scmi_xfer_token_clear(minfo, xfer); |
| hash_del(&xfer->node); |
| xfer->pending = false; |
| } |
| hlist_add_head(&xfer->node, &minfo->free_xfers); |
| } |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| } |
| |
| /** |
| * scmi_xfer_raw_put - Release an xfer that was taken by @scmi_xfer_raw_get |
| * |
| * @handle: Pointer to SCMI entity handle |
| * @xfer: A reference to the xfer to put |
| * |
| * Note that as with other xfer_put() handlers the xfer is really effectively |
| * released only if there are no more users on the system. |
| */ |
| void scmi_xfer_raw_put(const struct scmi_handle *handle, struct scmi_xfer *xfer) |
| { |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| xfer->flags &= ~SCMI_XFER_FLAG_IS_RAW; |
| xfer->flags &= ~SCMI_XFER_FLAG_CHAN_SET; |
| return __scmi_xfer_put(&info->tx_minfo, xfer); |
| } |
| |
| /** |
| * scmi_xfer_lookup_unlocked - Helper to lookup an xfer_id |
| * |
| * @minfo: Pointer to Tx/Rx Message management info based on channel type |
| * @xfer_id: Token ID to lookup in @pending_xfers |
| * |
| * Refcounting is untouched. |
| * |
| * Context: Assumes to be called with @xfer_lock already acquired. |
| * |
| * Return: A valid xfer on Success or error otherwise |
| */ |
| static struct scmi_xfer * |
| scmi_xfer_lookup_unlocked(struct scmi_xfers_info *minfo, u16 xfer_id) |
| { |
| struct scmi_xfer *xfer = NULL; |
| |
| if (test_bit(xfer_id, minfo->xfer_alloc_table)) |
| xfer = XFER_FIND(minfo->pending_xfers, xfer_id); |
| |
| return xfer ?: ERR_PTR(-EINVAL); |
| } |
| |
| /** |
| * scmi_bad_message_trace - A helper to trace weird messages |
| * |
| * @cinfo: A reference to the channel descriptor on which the message was |
| * received |
| * @msg_hdr: Message header to track |
| * @err: A specific error code used as a status value in traces. |
| * |
| * This helper can be used to trace any kind of weird, incomplete, unexpected, |
| * timed-out message that arrives and as such, can be traced only referring to |
| * the header content, since the payload is missing/unreliable. |
| */ |
| static void scmi_bad_message_trace(struct scmi_chan_info *cinfo, u32 msg_hdr, |
| enum scmi_bad_msg err) |
| { |
| char *tag; |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| |
| switch (MSG_XTRACT_TYPE(msg_hdr)) { |
| case MSG_TYPE_COMMAND: |
| tag = "!RESP"; |
| break; |
| case MSG_TYPE_DELAYED_RESP: |
| tag = "!DLYD"; |
| break; |
| case MSG_TYPE_NOTIFICATION: |
| tag = "!NOTI"; |
| break; |
| default: |
| tag = "!UNKN"; |
| break; |
| } |
| |
| trace_scmi_msg_dump(info->id, cinfo->id, |
| MSG_XTRACT_PROT_ID(msg_hdr), |
| MSG_XTRACT_ID(msg_hdr), tag, |
| MSG_XTRACT_TOKEN(msg_hdr), err, NULL, 0); |
| } |
| |
| /** |
| * scmi_msg_response_validate - Validate message type against state of related |
| * xfer |
| * |
| * @cinfo: A reference to the channel descriptor. |
| * @msg_type: Message type to check |
| * @xfer: A reference to the xfer to validate against @msg_type |
| * |
| * This function checks if @msg_type is congruent with the current state of |
| * a pending @xfer; if an asynchronous delayed response is received before the |
| * related synchronous response (Out-of-Order Delayed Response) the missing |
| * synchronous response is assumed to be OK and completed, carrying on with the |
| * Delayed Response: this is done to address the case in which the underlying |
| * SCMI transport can deliver such out-of-order responses. |
| * |
| * Context: Assumes to be called with xfer->lock already acquired. |
| * |
| * Return: 0 on Success, error otherwise |
| */ |
| static inline int scmi_msg_response_validate(struct scmi_chan_info *cinfo, |
| u8 msg_type, |
| struct scmi_xfer *xfer) |
| { |
| /* |
| * Even if a response was indeed expected on this slot at this point, |
| * a buggy platform could wrongly reply feeding us an unexpected |
| * delayed response we're not prepared to handle: bail-out safely |
| * blaming firmware. |
| */ |
| if (msg_type == MSG_TYPE_DELAYED_RESP && !xfer->async_done) { |
| dev_err(cinfo->dev, |
| "Delayed Response for %d not expected! Buggy F/W ?\n", |
| xfer->hdr.seq); |
| return -EINVAL; |
| } |
| |
| switch (xfer->state) { |
| case SCMI_XFER_SENT_OK: |
| if (msg_type == MSG_TYPE_DELAYED_RESP) { |
| /* |
| * Delayed Response expected but delivered earlier. |
| * Assume message RESPONSE was OK and skip state. |
| */ |
| xfer->hdr.status = SCMI_SUCCESS; |
| xfer->state = SCMI_XFER_RESP_OK; |
| complete(&xfer->done); |
| dev_warn(cinfo->dev, |
| "Received valid OoO Delayed Response for %d\n", |
| xfer->hdr.seq); |
| } |
| break; |
| case SCMI_XFER_RESP_OK: |
| if (msg_type != MSG_TYPE_DELAYED_RESP) |
| return -EINVAL; |
| break; |
| case SCMI_XFER_DRESP_OK: |
| /* No further message expected once in SCMI_XFER_DRESP_OK */ |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * scmi_xfer_state_update - Update xfer state |
| * |
| * @xfer: A reference to the xfer to update |
| * @msg_type: Type of message being processed. |
| * |
| * Note that this message is assumed to have been already successfully validated |
| * by @scmi_msg_response_validate(), so here we just update the state. |
| * |
| * Context: Assumes to be called on an xfer exclusively acquired using the |
| * busy flag. |
| */ |
| static inline void scmi_xfer_state_update(struct scmi_xfer *xfer, u8 msg_type) |
| { |
| xfer->hdr.type = msg_type; |
| |
| /* Unknown command types were already discarded earlier */ |
| if (xfer->hdr.type == MSG_TYPE_COMMAND) |
| xfer->state = SCMI_XFER_RESP_OK; |
| else |
| xfer->state = SCMI_XFER_DRESP_OK; |
| } |
| |
| static bool scmi_xfer_acquired(struct scmi_xfer *xfer) |
| { |
| int ret; |
| |
| ret = atomic_cmpxchg(&xfer->busy, SCMI_XFER_FREE, SCMI_XFER_BUSY); |
| |
| return ret == SCMI_XFER_FREE; |
| } |
| |
| /** |
| * scmi_xfer_command_acquire - Helper to lookup and acquire a command xfer |
| * |
| * @cinfo: A reference to the channel descriptor. |
| * @msg_hdr: A message header to use as lookup key |
| * |
| * When a valid xfer is found for the sequence number embedded in the provided |
| * msg_hdr, reference counting is properly updated and exclusive access to this |
| * xfer is granted till released with @scmi_xfer_command_release. |
| * |
| * Return: A valid @xfer on Success or error otherwise. |
| */ |
| static inline struct scmi_xfer * |
| scmi_xfer_command_acquire(struct scmi_chan_info *cinfo, u32 msg_hdr) |
| { |
| int ret; |
| unsigned long flags; |
| struct scmi_xfer *xfer; |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| struct scmi_xfers_info *minfo = &info->tx_minfo; |
| u8 msg_type = MSG_XTRACT_TYPE(msg_hdr); |
| u16 xfer_id = MSG_XTRACT_TOKEN(msg_hdr); |
| |
| /* Are we even expecting this? */ |
| spin_lock_irqsave(&minfo->xfer_lock, flags); |
| xfer = scmi_xfer_lookup_unlocked(minfo, xfer_id); |
| if (IS_ERR(xfer)) { |
| dev_err(cinfo->dev, |
| "Message for %d type %d is not expected!\n", |
| xfer_id, msg_type); |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| |
| scmi_bad_message_trace(cinfo, msg_hdr, MSG_UNEXPECTED); |
| scmi_inc_count(info->dbg->counters, ERR_MSG_UNEXPECTED); |
| |
| return xfer; |
| } |
| refcount_inc(&xfer->users); |
| spin_unlock_irqrestore(&minfo->xfer_lock, flags); |
| |
| spin_lock_irqsave(&xfer->lock, flags); |
| ret = scmi_msg_response_validate(cinfo, msg_type, xfer); |
| /* |
| * If a pending xfer was found which was also in a congruent state with |
| * the received message, acquire exclusive access to it setting the busy |
| * flag. |
| * Spins only on the rare limit condition of concurrent reception of |
| * RESP and DRESP for the same xfer. |
| */ |
| if (!ret) { |
| spin_until_cond(scmi_xfer_acquired(xfer)); |
| scmi_xfer_state_update(xfer, msg_type); |
| } |
| spin_unlock_irqrestore(&xfer->lock, flags); |
| |
| if (ret) { |
| dev_err(cinfo->dev, |
| "Invalid message type:%d for %d - HDR:0x%X state:%d\n", |
| msg_type, xfer_id, msg_hdr, xfer->state); |
| |
| scmi_bad_message_trace(cinfo, msg_hdr, MSG_INVALID); |
| scmi_inc_count(info->dbg->counters, ERR_MSG_INVALID); |
| |
| /* On error the refcount incremented above has to be dropped */ |
| __scmi_xfer_put(minfo, xfer); |
| xfer = ERR_PTR(-EINVAL); |
| } |
| |
| return xfer; |
| } |
| |
| static inline void scmi_xfer_command_release(struct scmi_info *info, |
| struct scmi_xfer *xfer) |
| { |
| atomic_set(&xfer->busy, SCMI_XFER_FREE); |
| __scmi_xfer_put(&info->tx_minfo, xfer); |
| } |
| |
| static inline void scmi_clear_channel(struct scmi_info *info, |
| struct scmi_chan_info *cinfo) |
| { |
| if (info->desc->ops->clear_channel) |
| info->desc->ops->clear_channel(cinfo); |
| } |
| |
| static void scmi_handle_notification(struct scmi_chan_info *cinfo, |
| u32 msg_hdr, void *priv) |
| { |
| struct scmi_xfer *xfer; |
| struct device *dev = cinfo->dev; |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| struct scmi_xfers_info *minfo = &info->rx_minfo; |
| ktime_t ts; |
| |
| ts = ktime_get_boottime(); |
| xfer = scmi_xfer_get(cinfo->handle, minfo); |
| if (IS_ERR(xfer)) { |
| dev_err(dev, "failed to get free message slot (%ld)\n", |
| PTR_ERR(xfer)); |
| |
| scmi_bad_message_trace(cinfo, msg_hdr, MSG_NOMEM); |
| scmi_inc_count(info->dbg->counters, ERR_MSG_NOMEM); |
| |
| scmi_clear_channel(info, cinfo); |
| return; |
| } |
| |
| unpack_scmi_header(msg_hdr, &xfer->hdr); |
| if (priv) |
| /* Ensure order between xfer->priv store and following ops */ |
| smp_store_mb(xfer->priv, priv); |
| info->desc->ops->fetch_notification(cinfo, info->desc->max_msg_size, |
| xfer); |
| |
| trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id, |
| xfer->hdr.id, "NOTI", xfer->hdr.seq, |
| xfer->hdr.status, xfer->rx.buf, xfer->rx.len); |
| scmi_inc_count(info->dbg->counters, NOTIFICATION_OK); |
| |
| scmi_notify(cinfo->handle, xfer->hdr.protocol_id, |
| xfer->hdr.id, xfer->rx.buf, xfer->rx.len, ts); |
| |
| trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id, |
| xfer->hdr.protocol_id, xfer->hdr.seq, |
| MSG_TYPE_NOTIFICATION); |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) { |
| xfer->hdr.seq = MSG_XTRACT_TOKEN(msg_hdr); |
| scmi_raw_message_report(info->raw, xfer, SCMI_RAW_NOTIF_QUEUE, |
| cinfo->id); |
| } |
| |
| __scmi_xfer_put(minfo, xfer); |
| |
| scmi_clear_channel(info, cinfo); |
| } |
| |
| static void scmi_handle_response(struct scmi_chan_info *cinfo, |
| u32 msg_hdr, void *priv) |
| { |
| struct scmi_xfer *xfer; |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| |
| xfer = scmi_xfer_command_acquire(cinfo, msg_hdr); |
| if (IS_ERR(xfer)) { |
| if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) |
| scmi_raw_error_report(info->raw, cinfo, msg_hdr, priv); |
| |
| if (MSG_XTRACT_TYPE(msg_hdr) == MSG_TYPE_DELAYED_RESP) |
| scmi_clear_channel(info, cinfo); |
| return; |
| } |
| |
| /* rx.len could be shrunk in the sync do_xfer, so reset to maxsz */ |
| if (xfer->hdr.type == MSG_TYPE_DELAYED_RESP) |
| xfer->rx.len = info->desc->max_msg_size; |
| |
| if (priv) |
| /* Ensure order between xfer->priv store and following ops */ |
| smp_store_mb(xfer->priv, priv); |
| info->desc->ops->fetch_response(cinfo, xfer); |
| |
| trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id, |
| xfer->hdr.id, |
| xfer->hdr.type == MSG_TYPE_DELAYED_RESP ? |
| (!SCMI_XFER_IS_RAW(xfer) ? "DLYD" : "dlyd") : |
| (!SCMI_XFER_IS_RAW(xfer) ? "RESP" : "resp"), |
| xfer->hdr.seq, xfer->hdr.status, |
| xfer->rx.buf, xfer->rx.len); |
| |
| trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id, |
| xfer->hdr.protocol_id, xfer->hdr.seq, |
| xfer->hdr.type); |
| |
| if (xfer->hdr.type == MSG_TYPE_DELAYED_RESP) { |
| scmi_clear_channel(info, cinfo); |
| complete(xfer->async_done); |
| scmi_inc_count(info->dbg->counters, DELAYED_RESPONSE_OK); |
| } else { |
| complete(&xfer->done); |
| scmi_inc_count(info->dbg->counters, RESPONSE_OK); |
| } |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) { |
| /* |
| * When in polling mode avoid to queue the Raw xfer on the IRQ |
| * RX path since it will be already queued at the end of the TX |
| * poll loop. |
| */ |
| if (!xfer->hdr.poll_completion) |
| scmi_raw_message_report(info->raw, xfer, |
| SCMI_RAW_REPLY_QUEUE, |
| cinfo->id); |
| } |
| |
| scmi_xfer_command_release(info, xfer); |
| } |
| |
| /** |
| * scmi_rx_callback() - callback for receiving messages |
| * |
| * @cinfo: SCMI channel info |
| * @msg_hdr: Message header |
| * @priv: Transport specific private data. |
| * |
| * Processes one received message to appropriate transfer information and |
| * signals completion of the transfer. |
| * |
| * NOTE: This function will be invoked in IRQ context, hence should be |
| * as optimal as possible. |
| */ |
| static void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, |
| void *priv) |
| { |
| u8 msg_type = MSG_XTRACT_TYPE(msg_hdr); |
| |
| switch (msg_type) { |
| case MSG_TYPE_NOTIFICATION: |
| scmi_handle_notification(cinfo, msg_hdr, priv); |
| break; |
| case MSG_TYPE_COMMAND: |
| case MSG_TYPE_DELAYED_RESP: |
| scmi_handle_response(cinfo, msg_hdr, priv); |
| break; |
| default: |
| WARN_ONCE(1, "received unknown msg_type:%d\n", msg_type); |
| scmi_bad_message_trace(cinfo, msg_hdr, MSG_UNKNOWN); |
| break; |
| } |
| } |
| |
| /** |
| * xfer_put() - Release a transmit message |
| * |
| * @ph: Pointer to SCMI protocol handle |
| * @xfer: message that was reserved by xfer_get_init |
| */ |
| static void xfer_put(const struct scmi_protocol_handle *ph, |
| struct scmi_xfer *xfer) |
| { |
| const struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| struct scmi_info *info = handle_to_scmi_info(pi->handle); |
| |
| __scmi_xfer_put(&info->tx_minfo, xfer); |
| } |
| |
| static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo, |
| struct scmi_xfer *xfer, ktime_t stop) |
| { |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| |
| /* |
| * Poll also on xfer->done so that polling can be forcibly terminated |
| * in case of out-of-order receptions of delayed responses |
| */ |
| return info->desc->ops->poll_done(cinfo, xfer) || |
| try_wait_for_completion(&xfer->done) || |
| ktime_after(ktime_get(), stop); |
| } |
| |
| static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc, |
| struct scmi_chan_info *cinfo, |
| struct scmi_xfer *xfer, unsigned int timeout_ms) |
| { |
| int ret = 0; |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| |
| if (xfer->hdr.poll_completion) { |
| /* |
| * Real polling is needed only if transport has NOT declared |
| * itself to support synchronous commands replies. |
| */ |
| if (!desc->sync_cmds_completed_on_ret) { |
| /* |
| * Poll on xfer using transport provided .poll_done(); |
| * assumes no completion interrupt was available. |
| */ |
| ktime_t stop = ktime_add_ms(ktime_get(), timeout_ms); |
| |
| spin_until_cond(scmi_xfer_done_no_timeout(cinfo, |
| xfer, stop)); |
| if (ktime_after(ktime_get(), stop)) { |
| dev_err(dev, |
| "timed out in resp(caller: %pS) - polling\n", |
| (void *)_RET_IP_); |
| ret = -ETIMEDOUT; |
| scmi_inc_count(info->dbg->counters, XFERS_RESPONSE_POLLED_TIMEOUT); |
| } |
| } |
| |
| if (!ret) { |
| unsigned long flags; |
| |
| /* |
| * Do not fetch_response if an out-of-order delayed |
| * response is being processed. |
| */ |
| spin_lock_irqsave(&xfer->lock, flags); |
| if (xfer->state == SCMI_XFER_SENT_OK) { |
| desc->ops->fetch_response(cinfo, xfer); |
| xfer->state = SCMI_XFER_RESP_OK; |
| } |
| spin_unlock_irqrestore(&xfer->lock, flags); |
| |
| /* Trace polled replies. */ |
| trace_scmi_msg_dump(info->id, cinfo->id, |
| xfer->hdr.protocol_id, xfer->hdr.id, |
| !SCMI_XFER_IS_RAW(xfer) ? |
| "RESP" : "resp", |
| xfer->hdr.seq, xfer->hdr.status, |
| xfer->rx.buf, xfer->rx.len); |
| scmi_inc_count(info->dbg->counters, RESPONSE_POLLED_OK); |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) { |
| scmi_raw_message_report(info->raw, xfer, |
| SCMI_RAW_REPLY_QUEUE, |
| cinfo->id); |
| } |
| } |
| } else { |
| /* And we wait for the response. */ |
| if (!wait_for_completion_timeout(&xfer->done, |
| msecs_to_jiffies(timeout_ms))) { |
| dev_err(dev, "timed out in resp(caller: %pS)\n", |
| (void *)_RET_IP_); |
| ret = -ETIMEDOUT; |
| scmi_inc_count(info->dbg->counters, XFERS_RESPONSE_TIMEOUT); |
| } |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_wait_for_message_response - An helper to group all the possible ways of |
| * waiting for a synchronous message response. |
| * |
| * @cinfo: SCMI channel info |
| * @xfer: Reference to the transfer being waited for. |
| * |
| * Chooses waiting strategy (sleep-waiting vs busy-waiting) depending on |
| * configuration flags like xfer->hdr.poll_completion. |
| * |
| * Return: 0 on Success, error otherwise. |
| */ |
| static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo, |
| struct scmi_xfer *xfer) |
| { |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| struct device *dev = info->dev; |
| |
| trace_scmi_xfer_response_wait(xfer->transfer_id, xfer->hdr.id, |
| xfer->hdr.protocol_id, xfer->hdr.seq, |
| info->desc->max_rx_timeout_ms, |
| xfer->hdr.poll_completion); |
| |
| return scmi_wait_for_reply(dev, info->desc, cinfo, xfer, |
| info->desc->max_rx_timeout_ms); |
| } |
| |
| /** |
| * scmi_xfer_raw_wait_for_message_response - An helper to wait for a message |
| * reply to an xfer raw request on a specific channel for the required timeout. |
| * |
| * @cinfo: SCMI channel info |
| * @xfer: Reference to the transfer being waited for. |
| * @timeout_ms: The maximum timeout in milliseconds |
| * |
| * Return: 0 on Success, error otherwise. |
| */ |
| int scmi_xfer_raw_wait_for_message_response(struct scmi_chan_info *cinfo, |
| struct scmi_xfer *xfer, |
| unsigned int timeout_ms) |
| { |
| int ret; |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| struct device *dev = info->dev; |
| |
| ret = scmi_wait_for_reply(dev, info->desc, cinfo, xfer, timeout_ms); |
| if (ret) |
| dev_dbg(dev, "timed out in RAW response - HDR:%08X\n", |
| pack_scmi_header(&xfer->hdr)); |
| |
| return ret; |
| } |
| |
| /** |
| * do_xfer() - Do one transfer |
| * |
| * @ph: Pointer to SCMI protocol handle |
| * @xfer: Transfer to initiate and wait for response |
| * |
| * Return: -ETIMEDOUT in case of no response, if transmit error, |
| * return corresponding error, else if all goes well, |
| * return 0. |
| */ |
| static int do_xfer(const struct scmi_protocol_handle *ph, |
| struct scmi_xfer *xfer) |
| { |
| int ret; |
| const struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| struct scmi_info *info = handle_to_scmi_info(pi->handle); |
| struct device *dev = info->dev; |
| struct scmi_chan_info *cinfo; |
| |
| /* Check for polling request on custom command xfers at first */ |
| if (xfer->hdr.poll_completion && |
| !is_transport_polling_capable(info->desc)) { |
| dev_warn_once(dev, |
| "Polling mode is not supported by transport.\n"); |
| scmi_inc_count(info->dbg->counters, SENT_FAIL_POLLING_UNSUPPORTED); |
| return -EINVAL; |
| } |
| |
| cinfo = idr_find(&info->tx_idr, pi->proto->id); |
| if (unlikely(!cinfo)) { |
| scmi_inc_count(info->dbg->counters, SENT_FAIL_CHANNEL_NOT_FOUND); |
| return -EINVAL; |
| } |
| /* True ONLY if also supported by transport. */ |
| if (is_polling_enabled(cinfo, info->desc)) |
| xfer->hdr.poll_completion = true; |
| |
| /* |
| * Initialise protocol id now from protocol handle to avoid it being |
| * overridden by mistake (or malice) by the protocol code mangling with |
| * the scmi_xfer structure prior to this. |
| */ |
| xfer->hdr.protocol_id = pi->proto->id; |
| reinit_completion(&xfer->done); |
| |
| trace_scmi_xfer_begin(xfer->transfer_id, xfer->hdr.id, |
| xfer->hdr.protocol_id, xfer->hdr.seq, |
| xfer->hdr.poll_completion); |
| |
| /* Clear any stale status */ |
| xfer->hdr.status = SCMI_SUCCESS; |
| xfer->state = SCMI_XFER_SENT_OK; |
| /* |
| * Even though spinlocking is not needed here since no race is possible |
| * on xfer->state due to the monotonically increasing tokens allocation, |
| * we must anyway ensure xfer->state initialization is not re-ordered |
| * after the .send_message() to be sure that on the RX path an early |
| * ISR calling scmi_rx_callback() cannot see an old stale xfer->state. |
| */ |
| smp_mb(); |
| |
| ret = info->desc->ops->send_message(cinfo, xfer); |
| if (ret < 0) { |
| dev_dbg(dev, "Failed to send message %d\n", ret); |
| scmi_inc_count(info->dbg->counters, SENT_FAIL); |
| return ret; |
| } |
| |
| trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id, |
| xfer->hdr.id, "CMND", xfer->hdr.seq, |
| xfer->hdr.status, xfer->tx.buf, xfer->tx.len); |
| scmi_inc_count(info->dbg->counters, SENT_OK); |
| |
| ret = scmi_wait_for_message_response(cinfo, xfer); |
| if (!ret && xfer->hdr.status) { |
| ret = scmi_to_linux_errno(xfer->hdr.status); |
| scmi_inc_count(info->dbg->counters, ERR_PROTOCOL); |
| } |
| |
| if (info->desc->ops->mark_txdone) |
| info->desc->ops->mark_txdone(cinfo, ret, xfer); |
| |
| trace_scmi_xfer_end(xfer->transfer_id, xfer->hdr.id, |
| xfer->hdr.protocol_id, xfer->hdr.seq, ret); |
| |
| return ret; |
| } |
| |
| static void reset_rx_to_maxsz(const struct scmi_protocol_handle *ph, |
| struct scmi_xfer *xfer) |
| { |
| const struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| struct scmi_info *info = handle_to_scmi_info(pi->handle); |
| |
| xfer->rx.len = info->desc->max_msg_size; |
| } |
| |
| /** |
| * do_xfer_with_response() - Do one transfer and wait until the delayed |
| * response is received |
| * |
| * @ph: Pointer to SCMI protocol handle |
| * @xfer: Transfer to initiate and wait for response |
| * |
| * Using asynchronous commands in atomic/polling mode should be avoided since |
| * it could cause long busy-waiting here, so ignore polling for the delayed |
| * response and WARN if it was requested for this command transaction since |
| * upper layers should refrain from issuing such kind of requests. |
| * |
| * The only other option would have been to refrain from using any asynchronous |
| * command even if made available, when an atomic transport is detected, and |
| * instead forcibly use the synchronous version (thing that can be easily |
| * attained at the protocol layer), but this would also have led to longer |
| * stalls of the channel for synchronous commands and possibly timeouts. |
| * (in other words there is usually a good reason if a platform provides an |
| * asynchronous version of a command and we should prefer to use it...just not |
| * when using atomic/polling mode) |
| * |
| * Return: -ETIMEDOUT in case of no delayed response, if transmit error, |
| * return corresponding error, else if all goes well, return 0. |
| */ |
| static int do_xfer_with_response(const struct scmi_protocol_handle *ph, |
| struct scmi_xfer *xfer) |
| { |
| int ret, timeout = msecs_to_jiffies(SCMI_MAX_RESPONSE_TIMEOUT); |
| DECLARE_COMPLETION_ONSTACK(async_response); |
| |
| xfer->async_done = &async_response; |
| |
| /* |
| * Delayed responses should not be polled, so an async command should |
| * not have been used when requiring an atomic/poll context; WARN and |
| * perform instead a sleeping wait. |
| * (Note Async + IgnoreDelayedResponses are sent via do_xfer) |
| */ |
| WARN_ON_ONCE(xfer->hdr.poll_completion); |
| |
| ret = do_xfer(ph, xfer); |
| if (!ret) { |
| if (!wait_for_completion_timeout(xfer->async_done, timeout)) { |
| dev_err(ph->dev, |
| "timed out in delayed resp(caller: %pS)\n", |
| (void *)_RET_IP_); |
| ret = -ETIMEDOUT; |
| } else if (xfer->hdr.status) { |
| ret = scmi_to_linux_errno(xfer->hdr.status); |
| } |
| } |
| |
| xfer->async_done = NULL; |
| return ret; |
| } |
| |
| /** |
| * xfer_get_init() - Allocate and initialise one message for transmit |
| * |
| * @ph: Pointer to SCMI protocol handle |
| * @msg_id: Message identifier |
| * @tx_size: transmit message size |
| * @rx_size: receive message size |
| * @p: pointer to the allocated and initialised message |
| * |
| * This function allocates the message using @scmi_xfer_get and |
| * initialise the header. |
| * |
| * Return: 0 if all went fine with @p pointing to message, else |
| * corresponding error. |
| */ |
| static int xfer_get_init(const struct scmi_protocol_handle *ph, |
| u8 msg_id, size_t tx_size, size_t rx_size, |
| struct scmi_xfer **p) |
| { |
| int ret; |
| struct scmi_xfer *xfer; |
| const struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| struct scmi_info *info = handle_to_scmi_info(pi->handle); |
| struct scmi_xfers_info *minfo = &info->tx_minfo; |
| struct device *dev = info->dev; |
| |
| /* Ensure we have sane transfer sizes */ |
| if (rx_size > info->desc->max_msg_size || |
| tx_size > info->desc->max_msg_size) |
| return -ERANGE; |
| |
| xfer = scmi_xfer_get(pi->handle, minfo); |
| if (IS_ERR(xfer)) { |
| ret = PTR_ERR(xfer); |
| dev_err(dev, "failed to get free message slot(%d)\n", ret); |
| return ret; |
| } |
| |
| /* Pick a sequence number and register this xfer as in-flight */ |
| ret = scmi_xfer_pending_set(xfer, minfo); |
| if (ret) { |
| dev_err(pi->handle->dev, |
| "Failed to get monotonic token %d\n", ret); |
| __scmi_xfer_put(minfo, xfer); |
| return ret; |
| } |
| |
| xfer->tx.len = tx_size; |
| xfer->rx.len = rx_size ? : info->desc->max_msg_size; |
| xfer->hdr.type = MSG_TYPE_COMMAND; |
| xfer->hdr.id = msg_id; |
| xfer->hdr.poll_completion = false; |
| |
| *p = xfer; |
| |
| return 0; |
| } |
| |
| /** |
| * version_get() - command to get the revision of the SCMI entity |
| * |
| * @ph: Pointer to SCMI protocol handle |
| * @version: Holds returned version of protocol. |
| * |
| * Updates the SCMI information in the internal data structure. |
| * |
| * Return: 0 if all went fine, else return appropriate error. |
| */ |
| static int version_get(const struct scmi_protocol_handle *ph, u32 *version) |
| { |
| int ret; |
| __le32 *rev_info; |
| struct scmi_xfer *t; |
| |
| ret = xfer_get_init(ph, PROTOCOL_VERSION, 0, sizeof(*version), &t); |
| if (ret) |
| return ret; |
| |
| ret = do_xfer(ph, t); |
| if (!ret) { |
| rev_info = t->rx.buf; |
| *version = le32_to_cpu(*rev_info); |
| } |
| |
| xfer_put(ph, t); |
| return ret; |
| } |
| |
| /** |
| * scmi_set_protocol_priv - Set protocol specific data at init time |
| * |
| * @ph: A reference to the protocol handle. |
| * @priv: The private data to set. |
| * @version: The detected protocol version for the core to register. |
| * |
| * Return: 0 on Success |
| */ |
| static int scmi_set_protocol_priv(const struct scmi_protocol_handle *ph, |
| void *priv, u32 version) |
| { |
| struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| |
| pi->priv = priv; |
| pi->version = version; |
| |
| return 0; |
| } |
| |
| /** |
| * scmi_get_protocol_priv - Set protocol specific data at init time |
| * |
| * @ph: A reference to the protocol handle. |
| * |
| * Return: Protocol private data if any was set. |
| */ |
| static void *scmi_get_protocol_priv(const struct scmi_protocol_handle *ph) |
| { |
| const struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| |
| return pi->priv; |
| } |
| |
| static const struct scmi_xfer_ops xfer_ops = { |
| .version_get = version_get, |
| .xfer_get_init = xfer_get_init, |
| .reset_rx_to_maxsz = reset_rx_to_maxsz, |
| .do_xfer = do_xfer, |
| .do_xfer_with_response = do_xfer_with_response, |
| .xfer_put = xfer_put, |
| }; |
| |
| struct scmi_msg_resp_domain_name_get { |
| __le32 flags; |
| u8 name[SCMI_MAX_STR_SIZE]; |
| }; |
| |
| /** |
| * scmi_common_extended_name_get - Common helper to get extended resources name |
| * @ph: A protocol handle reference. |
| * @cmd_id: The specific command ID to use. |
| * @res_id: The specific resource ID to use. |
| * @flags: A pointer to specific flags to use, if any. |
| * @name: A pointer to the preallocated area where the retrieved name will be |
| * stored as a NULL terminated string. |
| * @len: The len in bytes of the @name char array. |
| * |
| * Return: 0 on Succcess |
| */ |
| static int scmi_common_extended_name_get(const struct scmi_protocol_handle *ph, |
| u8 cmd_id, u32 res_id, u32 *flags, |
| char *name, size_t len) |
| { |
| int ret; |
| size_t txlen; |
| struct scmi_xfer *t; |
| struct scmi_msg_resp_domain_name_get *resp; |
| |
| txlen = !flags ? sizeof(res_id) : sizeof(res_id) + sizeof(*flags); |
| ret = ph->xops->xfer_get_init(ph, cmd_id, txlen, sizeof(*resp), &t); |
| if (ret) |
| goto out; |
| |
| put_unaligned_le32(res_id, t->tx.buf); |
| if (flags) |
| put_unaligned_le32(*flags, t->tx.buf + sizeof(res_id)); |
| resp = t->rx.buf; |
| |
| ret = ph->xops->do_xfer(ph, t); |
| if (!ret) |
| strscpy(name, resp->name, len); |
| |
| ph->xops->xfer_put(ph, t); |
| out: |
| if (ret) |
| dev_warn(ph->dev, |
| "Failed to get extended name - id:%u (ret:%d). Using %s\n", |
| res_id, ret, name); |
| return ret; |
| } |
| |
| /** |
| * scmi_common_get_max_msg_size - Get maximum message size |
| * @ph: A protocol handle reference. |
| * |
| * Return: Maximum message size for the current protocol. |
| */ |
| static int scmi_common_get_max_msg_size(const struct scmi_protocol_handle *ph) |
| { |
| const struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| struct scmi_info *info = handle_to_scmi_info(pi->handle); |
| |
| return info->desc->max_msg_size; |
| } |
| |
| /** |
| * struct scmi_iterator - Iterator descriptor |
| * @msg: A reference to the message TX buffer; filled by @prepare_message with |
| * a proper custom command payload for each multi-part command request. |
| * @resp: A reference to the response RX buffer; used by @update_state and |
| * @process_response to parse the multi-part replies. |
| * @t: A reference to the underlying xfer initialized and used transparently by |
| * the iterator internal routines. |
| * @ph: A reference to the associated protocol handle to be used. |
| * @ops: A reference to the custom provided iterator operations. |
| * @state: The current iterator state; used and updated in turn by the iterators |
| * internal routines and by the caller-provided @scmi_iterator_ops. |
| * @priv: A reference to optional private data as provided by the caller and |
| * passed back to the @@scmi_iterator_ops. |
| */ |
| struct scmi_iterator { |
| void *msg; |
| void *resp; |
| struct scmi_xfer *t; |
| const struct scmi_protocol_handle *ph; |
| struct scmi_iterator_ops *ops; |
| struct scmi_iterator_state state; |
| void *priv; |
| }; |
| |
| static void *scmi_iterator_init(const struct scmi_protocol_handle *ph, |
| struct scmi_iterator_ops *ops, |
| unsigned int max_resources, u8 msg_id, |
| size_t tx_size, void *priv) |
| { |
| int ret; |
| struct scmi_iterator *i; |
| |
| i = devm_kzalloc(ph->dev, sizeof(*i), GFP_KERNEL); |
| if (!i) |
| return ERR_PTR(-ENOMEM); |
| |
| i->ph = ph; |
| i->ops = ops; |
| i->priv = priv; |
| |
| ret = ph->xops->xfer_get_init(ph, msg_id, tx_size, 0, &i->t); |
| if (ret) { |
| devm_kfree(ph->dev, i); |
| return ERR_PTR(ret); |
| } |
| |
| i->state.max_resources = max_resources; |
| i->msg = i->t->tx.buf; |
| i->resp = i->t->rx.buf; |
| |
| return i; |
| } |
| |
| static int scmi_iterator_run(void *iter) |
| { |
| int ret = -EINVAL; |
| struct scmi_iterator_ops *iops; |
| const struct scmi_protocol_handle *ph; |
| struct scmi_iterator_state *st; |
| struct scmi_iterator *i = iter; |
| |
| if (!i || !i->ops || !i->ph) |
| return ret; |
| |
| iops = i->ops; |
| ph = i->ph; |
| st = &i->state; |
| |
| do { |
| iops->prepare_message(i->msg, st->desc_index, i->priv); |
| ret = ph->xops->do_xfer(ph, i->t); |
| if (ret) |
| break; |
| |
| st->rx_len = i->t->rx.len; |
| ret = iops->update_state(st, i->resp, i->priv); |
| if (ret) |
| break; |
| |
| if (st->num_returned > st->max_resources - st->desc_index) { |
| dev_err(ph->dev, |
| "No. of resources can't exceed %d\n", |
| st->max_resources); |
| ret = -EINVAL; |
| break; |
| } |
| |
| for (st->loop_idx = 0; st->loop_idx < st->num_returned; |
| st->loop_idx++) { |
| ret = iops->process_response(ph, i->resp, st, i->priv); |
| if (ret) |
| goto out; |
| } |
| |
| st->desc_index += st->num_returned; |
| ph->xops->reset_rx_to_maxsz(ph, i->t); |
| /* |
| * check for both returned and remaining to avoid infinite |
| * loop due to buggy firmware |
| */ |
| } while (st->num_returned && st->num_remaining); |
| |
| out: |
| /* Finalize and destroy iterator */ |
| ph->xops->xfer_put(ph, i->t); |
| devm_kfree(ph->dev, i); |
| |
| return ret; |
| } |
| |
| struct scmi_msg_get_fc_info { |
| __le32 domain; |
| __le32 message_id; |
| }; |
| |
| struct scmi_msg_resp_desc_fc { |
| __le32 attr; |
| #define SUPPORTS_DOORBELL(x) ((x) & BIT(0)) |
| #define DOORBELL_REG_WIDTH(x) FIELD_GET(GENMASK(2, 1), (x)) |
| __le32 rate_limit; |
| __le32 chan_addr_low; |
| __le32 chan_addr_high; |
| __le32 chan_size; |
| __le32 db_addr_low; |
| __le32 db_addr_high; |
| __le32 db_set_lmask; |
| __le32 db_set_hmask; |
| __le32 db_preserve_lmask; |
| __le32 db_preserve_hmask; |
| }; |
| |
| static void |
| scmi_common_fastchannel_init(const struct scmi_protocol_handle *ph, |
| u8 describe_id, u32 message_id, u32 valid_size, |
| u32 domain, void __iomem **p_addr, |
| struct scmi_fc_db_info **p_db, u32 *rate_limit) |
| { |
| int ret; |
| u32 flags; |
| u64 phys_addr; |
| u8 size; |
| void __iomem *addr; |
| struct scmi_xfer *t; |
| struct scmi_fc_db_info *db = NULL; |
| struct scmi_msg_get_fc_info *info; |
| struct scmi_msg_resp_desc_fc *resp; |
| const struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| |
| if (!p_addr) { |
| ret = -EINVAL; |
| goto err_out; |
| } |
| |
| ret = ph->xops->xfer_get_init(ph, describe_id, |
| sizeof(*info), sizeof(*resp), &t); |
| if (ret) |
| goto err_out; |
| |
| info = t->tx.buf; |
| info->domain = cpu_to_le32(domain); |
| info->message_id = cpu_to_le32(message_id); |
| |
| /* |
| * Bail out on error leaving fc_info addresses zeroed; this includes |
| * the case in which the requested domain/message_id does NOT support |
| * fastchannels at all. |
| */ |
| ret = ph->xops->do_xfer(ph, t); |
| if (ret) |
| goto err_xfer; |
| |
| resp = t->rx.buf; |
| flags = le32_to_cpu(resp->attr); |
| size = le32_to_cpu(resp->chan_size); |
| if (size != valid_size) { |
| ret = -EINVAL; |
| goto err_xfer; |
| } |
| |
| if (rate_limit) |
| *rate_limit = le32_to_cpu(resp->rate_limit) & GENMASK(19, 0); |
| |
| phys_addr = le32_to_cpu(resp->chan_addr_low); |
| phys_addr |= (u64)le32_to_cpu(resp->chan_addr_high) << 32; |
| addr = devm_ioremap(ph->dev, phys_addr, size); |
| if (!addr) { |
| ret = -EADDRNOTAVAIL; |
| goto err_xfer; |
| } |
| |
| *p_addr = addr; |
| |
| if (p_db && SUPPORTS_DOORBELL(flags)) { |
| db = devm_kzalloc(ph->dev, sizeof(*db), GFP_KERNEL); |
| if (!db) { |
| ret = -ENOMEM; |
| goto err_db; |
| } |
| |
| size = 1 << DOORBELL_REG_WIDTH(flags); |
| phys_addr = le32_to_cpu(resp->db_addr_low); |
| phys_addr |= (u64)le32_to_cpu(resp->db_addr_high) << 32; |
| addr = devm_ioremap(ph->dev, phys_addr, size); |
| if (!addr) { |
| ret = -EADDRNOTAVAIL; |
| goto err_db_mem; |
| } |
| |
| db->addr = addr; |
| db->width = size; |
| db->set = le32_to_cpu(resp->db_set_lmask); |
| db->set |= (u64)le32_to_cpu(resp->db_set_hmask) << 32; |
| db->mask = le32_to_cpu(resp->db_preserve_lmask); |
| db->mask |= (u64)le32_to_cpu(resp->db_preserve_hmask) << 32; |
| |
| *p_db = db; |
| } |
| |
| ph->xops->xfer_put(ph, t); |
| |
| dev_dbg(ph->dev, |
| "Using valid FC for protocol %X [MSG_ID:%u / RES_ID:%u]\n", |
| pi->proto->id, message_id, domain); |
| |
| return; |
| |
| err_db_mem: |
| devm_kfree(ph->dev, db); |
| |
| err_db: |
| *p_addr = NULL; |
| |
| err_xfer: |
| ph->xops->xfer_put(ph, t); |
| |
| err_out: |
| dev_warn(ph->dev, |
| "Failed to get FC for protocol %X [MSG_ID:%u / RES_ID:%u] - ret:%d. Using regular messaging.\n", |
| pi->proto->id, message_id, domain, ret); |
| } |
| |
| #define SCMI_PROTO_FC_RING_DB(w) \ |
| do { \ |
| u##w val = 0; \ |
| \ |
| if (db->mask) \ |
| val = ioread##w(db->addr) & db->mask; \ |
| iowrite##w((u##w)db->set | val, db->addr); \ |
| } while (0) |
| |
| static void scmi_common_fastchannel_db_ring(struct scmi_fc_db_info *db) |
| { |
| if (!db || !db->addr) |
| return; |
| |
| if (db->width == 1) |
| SCMI_PROTO_FC_RING_DB(8); |
| else if (db->width == 2) |
| SCMI_PROTO_FC_RING_DB(16); |
| else if (db->width == 4) |
| SCMI_PROTO_FC_RING_DB(32); |
| else /* db->width == 8 */ |
| #ifdef CONFIG_64BIT |
| SCMI_PROTO_FC_RING_DB(64); |
| #else |
| { |
| u64 val = 0; |
| |
| if (db->mask) |
| val = ioread64_hi_lo(db->addr) & db->mask; |
| iowrite64_hi_lo(db->set | val, db->addr); |
| } |
| #endif |
| } |
| |
| /** |
| * scmi_protocol_msg_check - Check protocol message attributes |
| * |
| * @ph: A reference to the protocol handle. |
| * @message_id: The ID of the message to check. |
| * @attributes: A parameter to optionally return the retrieved message |
| * attributes, in case of Success. |
| * |
| * An helper to check protocol message attributes for a specific protocol |
| * and message pair. |
| * |
| * Return: 0 on SUCCESS |
| */ |
| static int scmi_protocol_msg_check(const struct scmi_protocol_handle *ph, |
| u32 message_id, u32 *attributes) |
| { |
| int ret; |
| struct scmi_xfer *t; |
| |
| ret = xfer_get_init(ph, PROTOCOL_MESSAGE_ATTRIBUTES, |
| sizeof(__le32), 0, &t); |
| if (ret) |
| return ret; |
| |
| put_unaligned_le32(message_id, t->tx.buf); |
| ret = do_xfer(ph, t); |
| if (!ret && attributes) |
| *attributes = get_unaligned_le32(t->rx.buf); |
| xfer_put(ph, t); |
| |
| return ret; |
| } |
| |
| static const struct scmi_proto_helpers_ops helpers_ops = { |
| .extended_name_get = scmi_common_extended_name_get, |
| .get_max_msg_size = scmi_common_get_max_msg_size, |
| .iter_response_init = scmi_iterator_init, |
| .iter_response_run = scmi_iterator_run, |
| .protocol_msg_check = scmi_protocol_msg_check, |
| .fastchannel_init = scmi_common_fastchannel_init, |
| .fastchannel_db_ring = scmi_common_fastchannel_db_ring, |
| }; |
| |
| /** |
| * scmi_revision_area_get - Retrieve version memory area. |
| * |
| * @ph: A reference to the protocol handle. |
| * |
| * A helper to grab the version memory area reference during SCMI Base protocol |
| * initialization. |
| * |
| * Return: A reference to the version memory area associated to the SCMI |
| * instance underlying this protocol handle. |
| */ |
| struct scmi_revision_info * |
| scmi_revision_area_get(const struct scmi_protocol_handle *ph) |
| { |
| const struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| |
| return pi->handle->version; |
| } |
| |
| /** |
| * scmi_protocol_version_negotiate - Negotiate protocol version |
| * |
| * @ph: A reference to the protocol handle. |
| * |
| * An helper to negotiate a protocol version different from the latest |
| * advertised as supported from the platform: on Success backward |
| * compatibility is assured by the platform. |
| * |
| * Return: 0 on Success |
| */ |
| static int scmi_protocol_version_negotiate(struct scmi_protocol_handle *ph) |
| { |
| int ret; |
| struct scmi_xfer *t; |
| struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| |
| /* At first check if NEGOTIATE_PROTOCOL_VERSION is supported ... */ |
| ret = scmi_protocol_msg_check(ph, NEGOTIATE_PROTOCOL_VERSION, NULL); |
| if (ret) |
| return ret; |
| |
| /* ... then attempt protocol version negotiation */ |
| ret = xfer_get_init(ph, NEGOTIATE_PROTOCOL_VERSION, |
| sizeof(__le32), 0, &t); |
| if (ret) |
| return ret; |
| |
| put_unaligned_le32(pi->proto->supported_version, t->tx.buf); |
| ret = do_xfer(ph, t); |
| if (!ret) |
| pi->negotiated_version = pi->proto->supported_version; |
| |
| xfer_put(ph, t); |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_alloc_init_protocol_instance - Allocate and initialize a protocol |
| * instance descriptor. |
| * @info: The reference to the related SCMI instance. |
| * @proto: The protocol descriptor. |
| * |
| * Allocate a new protocol instance descriptor, using the provided @proto |
| * description, against the specified SCMI instance @info, and initialize it; |
| * all resources management is handled via a dedicated per-protocol devres |
| * group. |
| * |
| * Context: Assumes to be called with @protocols_mtx already acquired. |
| * Return: A reference to a freshly allocated and initialized protocol instance |
| * or ERR_PTR on failure. On failure the @proto reference is at first |
| * put using @scmi_protocol_put() before releasing all the devres group. |
| */ |
| static struct scmi_protocol_instance * |
| scmi_alloc_init_protocol_instance(struct scmi_info *info, |
| const struct scmi_protocol *proto) |
| { |
| int ret = -ENOMEM; |
| void *gid; |
| struct scmi_protocol_instance *pi; |
| const struct scmi_handle *handle = &info->handle; |
| |
| /* Protocol specific devres group */ |
| gid = devres_open_group(handle->dev, NULL, GFP_KERNEL); |
| if (!gid) { |
| scmi_protocol_put(proto); |
| goto out; |
| } |
| |
| pi = devm_kzalloc(handle->dev, sizeof(*pi), GFP_KERNEL); |
| if (!pi) |
| goto clean; |
| |
| pi->gid = gid; |
| pi->proto = proto; |
| pi->handle = handle; |
| pi->ph.dev = handle->dev; |
| pi->ph.xops = &xfer_ops; |
| pi->ph.hops = &helpers_ops; |
| pi->ph.set_priv = scmi_set_protocol_priv; |
| pi->ph.get_priv = scmi_get_protocol_priv; |
| refcount_set(&pi->users, 1); |
| /* proto->init is assured NON NULL by scmi_protocol_register */ |
| ret = pi->proto->instance_init(&pi->ph); |
| if (ret) |
| goto clean; |
| |
| ret = idr_alloc(&info->protocols, pi, proto->id, proto->id + 1, |
| GFP_KERNEL); |
| if (ret != proto->id) |
| goto clean; |
| |
| /* |
| * Warn but ignore events registration errors since we do not want |
| * to skip whole protocols if their notifications are messed up. |
| */ |
| if (pi->proto->events) { |
| ret = scmi_register_protocol_events(handle, pi->proto->id, |
| &pi->ph, |
| pi->proto->events); |
| if (ret) |
| dev_warn(handle->dev, |
| "Protocol:%X - Events Registration Failed - err:%d\n", |
| pi->proto->id, ret); |
| } |
| |
| devres_close_group(handle->dev, pi->gid); |
| dev_dbg(handle->dev, "Initialized protocol: 0x%X\n", pi->proto->id); |
| |
| if (pi->version > proto->supported_version) { |
| ret = scmi_protocol_version_negotiate(&pi->ph); |
| if (!ret) { |
| dev_info(handle->dev, |
| "Protocol 0x%X successfully negotiated version 0x%X\n", |
| proto->id, pi->negotiated_version); |
| } else { |
| dev_warn(handle->dev, |
| "Detected UNSUPPORTED higher version 0x%X for protocol 0x%X.\n", |
| pi->version, pi->proto->id); |
| dev_warn(handle->dev, |
| "Trying version 0x%X. Backward compatibility is NOT assured.\n", |
| pi->proto->supported_version); |
| } |
| } |
| |
| return pi; |
| |
| clean: |
| /* Take care to put the protocol module's owner before releasing all */ |
| scmi_protocol_put(proto); |
| devres_release_group(handle->dev, gid); |
| out: |
| return ERR_PTR(ret); |
| } |
| |
| /** |
| * scmi_get_protocol_instance - Protocol initialization helper. |
| * @handle: A reference to the SCMI platform instance. |
| * @protocol_id: The protocol being requested. |
| * |
| * In case the required protocol has never been requested before for this |
| * instance, allocate and initialize all the needed structures while handling |
| * resource allocation with a dedicated per-protocol devres subgroup. |
| * |
| * Return: A reference to an initialized protocol instance or error on failure: |
| * in particular returns -EPROBE_DEFER when the desired protocol could |
| * NOT be found. |
| */ |
| static struct scmi_protocol_instance * __must_check |
| scmi_get_protocol_instance(const struct scmi_handle *handle, u8 protocol_id) |
| { |
| struct scmi_protocol_instance *pi; |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| mutex_lock(&info->protocols_mtx); |
| pi = idr_find(&info->protocols, protocol_id); |
| |
| if (pi) { |
| refcount_inc(&pi->users); |
| } else { |
| const struct scmi_protocol *proto; |
| |
| /* Fails if protocol not registered on bus */ |
| proto = scmi_protocol_get(protocol_id, &info->version); |
| if (proto) |
| pi = scmi_alloc_init_protocol_instance(info, proto); |
| else |
| pi = ERR_PTR(-EPROBE_DEFER); |
| } |
| mutex_unlock(&info->protocols_mtx); |
| |
| return pi; |
| } |
| |
| /** |
| * scmi_protocol_acquire - Protocol acquire |
| * @handle: A reference to the SCMI platform instance. |
| * @protocol_id: The protocol being requested. |
| * |
| * Register a new user for the requested protocol on the specified SCMI |
| * platform instance, possibly triggering its initialization on first user. |
| * |
| * Return: 0 if protocol was acquired successfully. |
| */ |
| int scmi_protocol_acquire(const struct scmi_handle *handle, u8 protocol_id) |
| { |
| return PTR_ERR_OR_ZERO(scmi_get_protocol_instance(handle, protocol_id)); |
| } |
| |
| /** |
| * scmi_protocol_release - Protocol de-initialization helper. |
| * @handle: A reference to the SCMI platform instance. |
| * @protocol_id: The protocol being requested. |
| * |
| * Remove one user for the specified protocol and triggers de-initialization |
| * and resources de-allocation once the last user has gone. |
| */ |
| void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id) |
| { |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| struct scmi_protocol_instance *pi; |
| |
| mutex_lock(&info->protocols_mtx); |
| pi = idr_find(&info->protocols, protocol_id); |
| if (WARN_ON(!pi)) |
| goto out; |
| |
| if (refcount_dec_and_test(&pi->users)) { |
| void *gid = pi->gid; |
| |
| if (pi->proto->events) |
| scmi_deregister_protocol_events(handle, protocol_id); |
| |
| if (pi->proto->instance_deinit) |
| pi->proto->instance_deinit(&pi->ph); |
| |
| idr_remove(&info->protocols, protocol_id); |
| |
| scmi_protocol_put(pi->proto); |
| |
| devres_release_group(handle->dev, gid); |
| dev_dbg(handle->dev, "De-Initialized protocol: 0x%X\n", |
| protocol_id); |
| } |
| |
| out: |
| mutex_unlock(&info->protocols_mtx); |
| } |
| |
| void scmi_setup_protocol_implemented(const struct scmi_protocol_handle *ph, |
| u8 *prot_imp) |
| { |
| const struct scmi_protocol_instance *pi = ph_to_pi(ph); |
| struct scmi_info *info = handle_to_scmi_info(pi->handle); |
| |
| info->protocols_imp = prot_imp; |
| } |
| |
| static bool |
| scmi_is_protocol_implemented(const struct scmi_handle *handle, u8 prot_id) |
| { |
| int i; |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| struct scmi_revision_info *rev = handle->version; |
| |
| if (!info->protocols_imp) |
| return false; |
| |
| for (i = 0; i < rev->num_protocols; i++) |
| if (info->protocols_imp[i] == prot_id) |
| return true; |
| return false; |
| } |
| |
| struct scmi_protocol_devres { |
| const struct scmi_handle *handle; |
| u8 protocol_id; |
| }; |
| |
| static void scmi_devm_release_protocol(struct device *dev, void *res) |
| { |
| struct scmi_protocol_devres *dres = res; |
| |
| scmi_protocol_release(dres->handle, dres->protocol_id); |
| } |
| |
| static struct scmi_protocol_instance __must_check * |
| scmi_devres_protocol_instance_get(struct scmi_device *sdev, u8 protocol_id) |
| { |
| struct scmi_protocol_instance *pi; |
| struct scmi_protocol_devres *dres; |
| |
| dres = devres_alloc(scmi_devm_release_protocol, |
| sizeof(*dres), GFP_KERNEL); |
| if (!dres) |
| return ERR_PTR(-ENOMEM); |
| |
| pi = scmi_get_protocol_instance(sdev->handle, protocol_id); |
| if (IS_ERR(pi)) { |
| devres_free(dres); |
| return pi; |
| } |
| |
| dres->handle = sdev->handle; |
| dres->protocol_id = protocol_id; |
| devres_add(&sdev->dev, dres); |
| |
| return pi; |
| } |
| |
| /** |
| * scmi_devm_protocol_get - Devres managed get protocol operations and handle |
| * @sdev: A reference to an scmi_device whose embedded struct device is to |
| * be used for devres accounting. |
| * @protocol_id: The protocol being requested. |
| * @ph: A pointer reference used to pass back the associated protocol handle. |
| * |
| * Get hold of a protocol accounting for its usage, eventually triggering its |
| * initialization, and returning the protocol specific operations and related |
| * protocol handle which will be used as first argument in most of the |
| * protocols operations methods. |
| * Being a devres based managed method, protocol hold will be automatically |
| * released, and possibly de-initialized on last user, once the SCMI driver |
| * owning the scmi_device is unbound from it. |
| * |
| * Return: A reference to the requested protocol operations or error. |
| * Must be checked for errors by caller. |
| */ |
| static const void __must_check * |
| scmi_devm_protocol_get(struct scmi_device *sdev, u8 protocol_id, |
| struct scmi_protocol_handle **ph) |
| { |
| struct scmi_protocol_instance *pi; |
| |
| if (!ph) |
| return ERR_PTR(-EINVAL); |
| |
| pi = scmi_devres_protocol_instance_get(sdev, protocol_id); |
| if (IS_ERR(pi)) |
| return pi; |
| |
| *ph = &pi->ph; |
| |
| return pi->proto->ops; |
| } |
| |
| /** |
| * scmi_devm_protocol_acquire - Devres managed helper to get hold of a protocol |
| * @sdev: A reference to an scmi_device whose embedded struct device is to |
| * be used for devres accounting. |
| * @protocol_id: The protocol being requested. |
| * |
| * Get hold of a protocol accounting for its usage, possibly triggering its |
| * initialization but without getting access to its protocol specific operations |
| * and handle. |
| * |
| * Being a devres based managed method, protocol hold will be automatically |
| * released, and possibly de-initialized on last user, once the SCMI driver |
| * owning the scmi_device is unbound from it. |
| * |
| * Return: 0 on SUCCESS |
| */ |
| static int __must_check scmi_devm_protocol_acquire(struct scmi_device *sdev, |
| u8 protocol_id) |
| { |
| struct scmi_protocol_instance *pi; |
| |
| pi = scmi_devres_protocol_instance_get(sdev, protocol_id); |
| if (IS_ERR(pi)) |
| return PTR_ERR(pi); |
| |
| return 0; |
| } |
| |
| static int scmi_devm_protocol_match(struct device *dev, void *res, void *data) |
| { |
| struct scmi_protocol_devres *dres = res; |
| |
| if (WARN_ON(!dres || !data)) |
| return 0; |
| |
| return dres->protocol_id == *((u8 *)data); |
| } |
| |
| /** |
| * scmi_devm_protocol_put - Devres managed put protocol operations and handle |
| * @sdev: A reference to an scmi_device whose embedded struct device is to |
| * be used for devres accounting. |
| * @protocol_id: The protocol being requested. |
| * |
| * Explicitly release a protocol hold previously obtained calling the above |
| * @scmi_devm_protocol_get. |
| */ |
| static void scmi_devm_protocol_put(struct scmi_device *sdev, u8 protocol_id) |
| { |
| int ret; |
| |
| ret = devres_release(&sdev->dev, scmi_devm_release_protocol, |
| scmi_devm_protocol_match, &protocol_id); |
| WARN_ON(ret); |
| } |
| |
| /** |
| * scmi_is_transport_atomic - Method to check if underlying transport for an |
| * SCMI instance is configured as atomic. |
| * |
| * @handle: A reference to the SCMI platform instance. |
| * @atomic_threshold: An optional return value for the system wide currently |
| * configured threshold for atomic operations. |
| * |
| * Return: True if transport is configured as atomic |
| */ |
| static bool scmi_is_transport_atomic(const struct scmi_handle *handle, |
| unsigned int *atomic_threshold) |
| { |
| bool ret; |
| struct scmi_info *info = handle_to_scmi_info(handle); |
| |
| ret = info->desc->atomic_enabled && |
| is_transport_polling_capable(info->desc); |
| if (ret && atomic_threshold) |
| *atomic_threshold = info->atomic_threshold; |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_handle_get() - Get the SCMI handle for a device |
| * |
| * @dev: pointer to device for which we want SCMI handle |
| * |
| * NOTE: The function does not track individual clients of the framework |
| * and is expected to be maintained by caller of SCMI protocol library. |
| * scmi_handle_put must be balanced with successful scmi_handle_get |
| * |
| * Return: pointer to handle if successful, NULL on error |
| */ |
| static struct scmi_handle *scmi_handle_get(struct device *dev) |
| { |
| struct list_head *p; |
| struct scmi_info *info; |
| struct scmi_handle *handle = NULL; |
| |
| mutex_lock(&scmi_list_mutex); |
| list_for_each(p, &scmi_list) { |
| info = list_entry(p, struct scmi_info, node); |
| if (dev->parent == info->dev) { |
| info->users++; |
| handle = &info->handle; |
| break; |
| } |
| } |
| mutex_unlock(&scmi_list_mutex); |
| |
| return handle; |
| } |
| |
| /** |
| * scmi_handle_put() - Release the handle acquired by scmi_handle_get |
| * |
| * @handle: handle acquired by scmi_handle_get |
| * |
| * NOTE: The function does not track individual clients of the framework |
| * and is expected to be maintained by caller of SCMI protocol library. |
| * scmi_handle_put must be balanced with successful scmi_handle_get |
| * |
| * Return: 0 is successfully released |
| * if null was passed, it returns -EINVAL; |
| */ |
| static int scmi_handle_put(const struct scmi_handle *handle) |
| { |
| struct scmi_info *info; |
| |
| if (!handle) |
| return -EINVAL; |
| |
| info = handle_to_scmi_info(handle); |
| mutex_lock(&scmi_list_mutex); |
| if (!WARN_ON(!info->users)) |
| info->users--; |
| mutex_unlock(&scmi_list_mutex); |
| |
| return 0; |
| } |
| |
| static void scmi_device_link_add(struct device *consumer, |
| struct device *supplier) |
| { |
| struct device_link *link; |
| |
| link = device_link_add(consumer, supplier, DL_FLAG_AUTOREMOVE_CONSUMER); |
| |
| WARN_ON(!link); |
| } |
| |
| static void scmi_set_handle(struct scmi_device *scmi_dev) |
| { |
| scmi_dev->handle = scmi_handle_get(&scmi_dev->dev); |
| if (scmi_dev->handle) |
| scmi_device_link_add(&scmi_dev->dev, scmi_dev->handle->dev); |
| } |
| |
| static int __scmi_xfer_info_init(struct scmi_info *sinfo, |
| struct scmi_xfers_info *info) |
| { |
| int i; |
| struct scmi_xfer *xfer; |
| struct device *dev = sinfo->dev; |
| const struct scmi_desc *desc = sinfo->desc; |
| |
| /* Pre-allocated messages, no more than what hdr.seq can support */ |
| if (WARN_ON(!info->max_msg || info->max_msg > MSG_TOKEN_MAX)) { |
| dev_err(dev, |
| "Invalid maximum messages %d, not in range [1 - %lu]\n", |
| info->max_msg, MSG_TOKEN_MAX); |
| return -EINVAL; |
| } |
| |
| hash_init(info->pending_xfers); |
| |
| /* Allocate a bitmask sized to hold MSG_TOKEN_MAX tokens */ |
| info->xfer_alloc_table = devm_bitmap_zalloc(dev, MSG_TOKEN_MAX, |
| GFP_KERNEL); |
| if (!info->xfer_alloc_table) |
| return -ENOMEM; |
| |
| /* |
| * Preallocate a number of xfers equal to max inflight messages, |
| * pre-initialize the buffer pointer to pre-allocated buffers and |
| * attach all of them to the free list |
| */ |
| INIT_HLIST_HEAD(&info->free_xfers); |
| for (i = 0; i < info->max_msg; i++) { |
| xfer = devm_kzalloc(dev, sizeof(*xfer), GFP_KERNEL); |
| if (!xfer) |
| return -ENOMEM; |
| |
| xfer->rx.buf = devm_kcalloc(dev, sizeof(u8), desc->max_msg_size, |
| GFP_KERNEL); |
| if (!xfer->rx.buf) |
| return -ENOMEM; |
| |
| xfer->tx.buf = xfer->rx.buf; |
| init_completion(&xfer->done); |
| spin_lock_init(&xfer->lock); |
| |
| /* Add initialized xfer to the free list */ |
| hlist_add_head(&xfer->node, &info->free_xfers); |
| } |
| |
| spin_lock_init(&info->xfer_lock); |
| |
| return 0; |
| } |
| |
| static int scmi_channels_max_msg_configure(struct scmi_info *sinfo) |
| { |
| const struct scmi_desc *desc = sinfo->desc; |
| |
| if (!desc->ops->get_max_msg) { |
| sinfo->tx_minfo.max_msg = desc->max_msg; |
| sinfo->rx_minfo.max_msg = desc->max_msg; |
| } else { |
| struct scmi_chan_info *base_cinfo; |
| |
| base_cinfo = idr_find(&sinfo->tx_idr, SCMI_PROTOCOL_BASE); |
| if (!base_cinfo) |
| return -EINVAL; |
| sinfo->tx_minfo.max_msg = desc->ops->get_max_msg(base_cinfo); |
| |
| /* RX channel is optional so can be skipped */ |
| base_cinfo = idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE); |
| if (base_cinfo) |
| sinfo->rx_minfo.max_msg = |
| desc->ops->get_max_msg(base_cinfo); |
| } |
| |
| return 0; |
| } |
| |
| static int scmi_xfer_info_init(struct scmi_info *sinfo) |
| { |
| int ret; |
| |
| ret = scmi_channels_max_msg_configure(sinfo); |
| if (ret) |
| return ret; |
| |
| ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo); |
| if (!ret && !idr_is_empty(&sinfo->rx_idr)) |
| ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo); |
| |
| return ret; |
| } |
| |
| static int scmi_chan_setup(struct scmi_info *info, struct device_node *of_node, |
| int prot_id, bool tx) |
| { |
| int ret, idx; |
| char name[32]; |
| struct scmi_chan_info *cinfo; |
| struct idr *idr; |
| struct scmi_device *tdev = NULL; |
| |
| /* Transmit channel is first entry i.e. index 0 */ |
| idx = tx ? 0 : 1; |
| idr = tx ? &info->tx_idr : &info->rx_idr; |
| |
| if (!info->desc->ops->chan_available(of_node, idx)) { |
| cinfo = idr_find(idr, SCMI_PROTOCOL_BASE); |
| if (unlikely(!cinfo)) /* Possible only if platform has no Rx */ |
| return -EINVAL; |
| goto idr_alloc; |
| } |
| |
| cinfo = devm_kzalloc(info->dev, sizeof(*cinfo), GFP_KERNEL); |
| if (!cinfo) |
| return -ENOMEM; |
| |
| cinfo->rx_timeout_ms = info->desc->max_rx_timeout_ms; |
| |
| /* Create a unique name for this transport device */ |
| snprintf(name, 32, "__scmi_transport_device_%s_%02X", |
| idx ? "rx" : "tx", prot_id); |
| /* Create a uniquely named, dedicated transport device for this chan */ |
| tdev = scmi_device_create(of_node, info->dev, prot_id, name); |
| if (!tdev) { |
| dev_err(info->dev, |
| "failed to create transport device (%s)\n", name); |
| devm_kfree(info->dev, cinfo); |
| return -EINVAL; |
| } |
| of_node_get(of_node); |
| |
| cinfo->id = prot_id; |
| cinfo->dev = &tdev->dev; |
| ret = info->desc->ops->chan_setup(cinfo, info->dev, tx); |
| if (ret) { |
| of_node_put(of_node); |
| scmi_device_destroy(info->dev, prot_id, name); |
| devm_kfree(info->dev, cinfo); |
| return ret; |
| } |
| |
| if (tx && is_polling_required(cinfo, info->desc)) { |
| if (is_transport_polling_capable(info->desc)) |
| dev_info(&tdev->dev, |
| "Enabled polling mode TX channel - prot_id:%d\n", |
| prot_id); |
| else |
| dev_warn(&tdev->dev, |
| "Polling mode NOT supported by transport.\n"); |
| } |
| |
| idr_alloc: |
| ret = idr_alloc(idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL); |
| if (ret != prot_id) { |
| dev_err(info->dev, |
| "unable to allocate SCMI idr slot err %d\n", ret); |
| /* Destroy channel and device only if created by this call. */ |
| if (tdev) { |
| of_node_put(of_node); |
| scmi_device_destroy(info->dev, prot_id, name); |
| devm_kfree(info->dev, cinfo); |
| } |
| return ret; |
| } |
| |
| cinfo->handle = &info->handle; |
| return 0; |
| } |
| |
| static inline int |
| scmi_txrx_setup(struct scmi_info *info, struct device_node *of_node, |
| int prot_id) |
| { |
| int ret = scmi_chan_setup(info, of_node, prot_id, true); |
| |
| if (!ret) { |
| /* Rx is optional, report only memory errors */ |
| ret = scmi_chan_setup(info, of_node, prot_id, false); |
| if (ret && ret != -ENOMEM) |
| ret = 0; |
| } |
| |
| if (ret) |
| dev_err(info->dev, |
| "failed to setup channel for protocol:0x%X\n", prot_id); |
| |
| return ret; |
| } |
| |
| /** |
| * scmi_channels_setup - Helper to initialize all required channels |
| * |
| * @info: The SCMI instance descriptor. |
| * |
| * Initialize all the channels found described in the DT against the underlying |
| * configured transport using custom defined dedicated devices instead of |
| * borrowing devices from the SCMI drivers; this way channels are initialized |
| * upfront during core SCMI stack probing and are no more coupled with SCMI |
| * devices used by SCMI drivers. |
| * |
| * Note that, even though a pair of TX/RX channels is associated to each |
| * protocol defined in the DT, a distinct freshly initialized channel is |
| * created only if the DT node for the protocol at hand describes a dedicated |
| * channel: in all the other cases the common BASE protocol channel is reused. |
| * |
| * Return: 0 on Success |
| */ |
| static int scmi_channels_setup(struct scmi_info *info) |
| { |
| int ret; |
| struct device_node *top_np = info->dev->of_node; |
| |
| /* Initialize a common generic channel at first */ |
| ret = scmi_txrx_setup(info, top_np, SCMI_PROTOCOL_BASE); |
| if (ret) |
| return ret; |
| |
| for_each_available_child_of_node_scoped(top_np, child) { |
| u32 prot_id; |
| |
| if (of_property_read_u32(child, "reg", &prot_id)) |
| continue; |
| |
| if (!FIELD_FIT(MSG_PROTOCOL_ID_MASK, prot_id)) |
| dev_err(info->dev, |
| "Out of range protocol %d\n", prot_id); |
| |
| ret = scmi_txrx_setup(info, child, prot_id); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int scmi_chan_destroy(int id, void *p, void *idr) |
| { |
| struct scmi_chan_info *cinfo = p; |
| |
| if (cinfo->dev) { |
| struct scmi_info *info = handle_to_scmi_info(cinfo->handle); |
| struct scmi_device *sdev = to_scmi_dev(cinfo->dev); |
| |
| of_node_put(cinfo->dev->of_node); |
| scmi_device_destroy(info->dev, id, sdev->name); |
| cinfo->dev = NULL; |
| } |
| |
| idr_remove(idr, id); |
| |
| return 0; |
| } |
| |
| static void scmi_cleanup_channels(struct scmi_info *info, struct idr *idr) |
| { |
| /* At first free all channels at the transport layer ... */ |
| idr_for_each(idr, info->desc->ops->chan_free, idr); |
| |
| /* ...then destroy all underlying devices */ |
| idr_for_each(idr, scmi_chan_destroy, idr); |
| |
| idr_destroy(idr); |
| } |
| |
| static void scmi_cleanup_txrx_channels(struct scmi_info *info) |
| { |
| scmi_cleanup_channels(info, &info->tx_idr); |
| |
| scmi_cleanup_channels(info, &info->rx_idr); |
| } |
| |
| static int scmi_bus_notifier(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct scmi_info *info = bus_nb_to_scmi_info(nb); |
| struct scmi_device *sdev = to_scmi_dev(data); |
| |
| /* Skip transport devices and devices of different SCMI instances */ |
| if (!strncmp(sdev->name, "__scmi_transport_device", 23) || |
| sdev->dev.parent != info->dev) |
| return NOTIFY_DONE; |
| |
| switch (action) { |
| case BUS_NOTIFY_BIND_DRIVER: |
| /* setup handle now as the transport is ready */ |
| scmi_set_handle(sdev); |
| break; |
| case BUS_NOTIFY_UNBOUND_DRIVER: |
| scmi_handle_put(sdev->handle); |
| sdev->handle = NULL; |
| break; |
| default: |
| return NOTIFY_DONE; |
| } |
| |
| dev_dbg(info->dev, "Device %s (%s) is now %s\n", dev_name(&sdev->dev), |
| sdev->name, action == BUS_NOTIFY_BIND_DRIVER ? |
| "about to be BOUND." : "UNBOUND."); |
| |
| return NOTIFY_OK; |
| } |
| |
| static int scmi_device_request_notifier(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct device_node *np; |
| struct scmi_device_id *id_table = data; |
| struct scmi_info *info = req_nb_to_scmi_info(nb); |
| |
| np = idr_find(&info->active_protocols, id_table->protocol_id); |
| if (!np) |
| return NOTIFY_DONE; |
| |
| dev_dbg(info->dev, "%sRequested device (%s) for protocol 0x%x\n", |
| action == SCMI_BUS_NOTIFY_DEVICE_REQUEST ? "" : "UN-", |
| id_table->name, id_table->protocol_id); |
| |
| switch (action) { |
| case SCMI_BUS_NOTIFY_DEVICE_REQUEST: |
| scmi_create_protocol_devices(np, info, id_table->protocol_id, |
| id_table->name); |
| break; |
| case SCMI_BUS_NOTIFY_DEVICE_UNREQUEST: |
| scmi_destroy_protocol_devices(info, id_table->protocol_id, |
| id_table->name); |
| break; |
| default: |
| return NOTIFY_DONE; |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| static const char * const dbg_counter_strs[] = { |
| "sent_ok", |
| "sent_fail", |
| "sent_fail_polling_unsupported", |
| "sent_fail_channel_not_found", |
| "response_ok", |
| "notification_ok", |
| "delayed_response_ok", |
| "xfers_response_timeout", |
| "xfers_response_polled_timeout", |
| "response_polled_ok", |
| "err_msg_unexpected", |
| "err_msg_invalid", |
| "err_msg_nomem", |
| "err_protocol", |
| }; |
| |
| static ssize_t reset_all_on_write(struct file *filp, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct scmi_debug_info *dbg = filp->private_data; |
| |
| for (int i = 0; i < SCMI_DEBUG_COUNTERS_LAST; i++) |
| atomic_set(&dbg->counters[i], 0); |
| |
| return count; |
| } |
| |
| static const struct file_operations fops_reset_counts = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .write = reset_all_on_write, |
| }; |
| |
| static void scmi_debugfs_counters_setup(struct scmi_debug_info *dbg, |
| struct dentry *trans) |
| { |
| struct dentry *counters; |
| int idx; |
| |
| counters = debugfs_create_dir("counters", trans); |
| |
| for (idx = 0; idx < SCMI_DEBUG_COUNTERS_LAST; idx++) |
| debugfs_create_atomic_t(dbg_counter_strs[idx], 0600, counters, |
| &dbg->counters[idx]); |
| |
| debugfs_create_file("reset", 0200, counters, dbg, &fops_reset_counts); |
| } |
| |
| static void scmi_debugfs_common_cleanup(void *d) |
| { |
| struct scmi_debug_info *dbg = d; |
| |
| if (!dbg) |
| return; |
| |
| debugfs_remove_recursive(dbg->top_dentry); |
| kfree(dbg->name); |
| kfree(dbg->type); |
| } |
| |
| static struct scmi_debug_info *scmi_debugfs_common_setup(struct scmi_info *info) |
| { |
| char top_dir[16]; |
| struct dentry *trans, *top_dentry; |
| struct scmi_debug_info *dbg; |
| const char *c_ptr = NULL; |
| |
| dbg = devm_kzalloc(info->dev, sizeof(*dbg), GFP_KERNEL); |
| if (!dbg) |
| return NULL; |
| |
| dbg->name = kstrdup(of_node_full_name(info->dev->of_node), GFP_KERNEL); |
| if (!dbg->name) { |
| devm_kfree(info->dev, dbg); |
| return NULL; |
| } |
| |
| of_property_read_string(info->dev->of_node, "compatible", &c_ptr); |
| dbg->type = kstrdup(c_ptr, GFP_KERNEL); |
| if (!dbg->type) { |
| kfree(dbg->name); |
| devm_kfree(info->dev, dbg); |
| return NULL; |
| } |
| |
| snprintf(top_dir, 16, "%d", info->id); |
| top_dentry = debugfs_create_dir(top_dir, scmi_top_dentry); |
| trans = debugfs_create_dir("transport", top_dentry); |
| |
| dbg->is_atomic = info->desc->atomic_enabled && |
| is_transport_polling_capable(info->desc); |
| |
| debugfs_create_str("instance_name", 0400, top_dentry, |
| (char **)&dbg->name); |
| |
| debugfs_create_u32("atomic_threshold_us", 0400, top_dentry, |
| &info->atomic_threshold); |
| |
| debugfs_create_str("type", 0400, trans, (char **)&dbg->type); |
| |
| debugfs_create_bool("is_atomic", 0400, trans, &dbg->is_atomic); |
| |
| debugfs_create_u32("max_rx_timeout_ms", 0400, trans, |
| (u32 *)&info->desc->max_rx_timeout_ms); |
| |
| debugfs_create_u32("max_msg_size", 0400, trans, |
| (u32 *)&info->desc->max_msg_size); |
| |
| debugfs_create_u32("tx_max_msg", 0400, trans, |
| (u32 *)&info->tx_minfo.max_msg); |
| |
| debugfs_create_u32("rx_max_msg", 0400, trans, |
| (u32 *)&info->rx_minfo.max_msg); |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_DEBUG_COUNTERS)) |
| scmi_debugfs_counters_setup(dbg, trans); |
| |
| dbg->top_dentry = top_dentry; |
| |
| if (devm_add_action_or_reset(info->dev, |
| scmi_debugfs_common_cleanup, dbg)) |
| return NULL; |
| |
| return dbg; |
| } |
| |
| static int scmi_debugfs_raw_mode_setup(struct scmi_info *info) |
| { |
| int id, num_chans = 0, ret = 0; |
| struct scmi_chan_info *cinfo; |
| u8 channels[SCMI_MAX_CHANNELS] = {}; |
| DECLARE_BITMAP(protos, SCMI_MAX_CHANNELS) = {}; |
| |
| if (!info->dbg) |
| return -EINVAL; |
| |
| /* Enumerate all channels to collect their ids */ |
| idr_for_each_entry(&info->tx_idr, cinfo, id) { |
| /* |
| * Cannot happen, but be defensive. |
| * Zero as num_chans is ok, warn and carry on. |
| */ |
| if (num_chans >= SCMI_MAX_CHANNELS || !cinfo) { |
| dev_warn(info->dev, |
| "SCMI RAW - Error enumerating channels\n"); |
| break; |
| } |
| |
| if (!test_bit(cinfo->id, protos)) { |
| channels[num_chans++] = cinfo->id; |
| set_bit(cinfo->id, protos); |
| } |
| } |
| |
| info->raw = scmi_raw_mode_init(&info->handle, info->dbg->top_dentry, |
| info->id, channels, num_chans, |
| info->desc, info->tx_minfo.max_msg); |
| if (IS_ERR(info->raw)) { |
| dev_err(info->dev, "Failed to initialize SCMI RAW Mode !\n"); |
| ret = PTR_ERR(info->raw); |
| info->raw = NULL; |
| } |
| |
| return ret; |
| } |
| |
| static const struct scmi_desc *scmi_transport_setup(struct device *dev) |
| { |
| struct scmi_transport *trans; |
| int ret; |
| |
| trans = dev_get_platdata(dev); |
| if (!trans || !trans->desc || !trans->supplier || !trans->core_ops) |
| return NULL; |
| |
| if (!device_link_add(dev, trans->supplier, DL_FLAG_AUTOREMOVE_CONSUMER)) { |
| dev_err(dev, |
| "Adding link to supplier transport device failed\n"); |
| return NULL; |
| } |
| |
| /* Provide core transport ops */ |
| *trans->core_ops = &scmi_trans_core_ops; |
| |
| dev_info(dev, "Using %s\n", dev_driver_string(trans->supplier)); |
| |
| ret = of_property_read_u32(dev->of_node, "max-rx-timeout-ms", |
| &trans->desc->max_rx_timeout_ms); |
| if (ret && ret != -EINVAL) |
| dev_err(dev, "Malformed max-rx-timeout-ms DT property.\n"); |
| |
| dev_info(dev, "SCMI max-rx-timeout: %dms\n", |
| trans->desc->max_rx_timeout_ms); |
| |
| return trans->desc; |
| } |
| |
| static int scmi_probe(struct platform_device *pdev) |
| { |
| int ret; |
| char *err_str = "probe failure\n"; |
| struct scmi_handle *handle; |
| const struct scmi_desc *desc; |
| struct scmi_info *info; |
| bool coex = IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT_COEX); |
| struct device *dev = &pdev->dev; |
| struct device_node *child, *np = dev->of_node; |
| |
| desc = scmi_transport_setup(dev); |
| if (!desc) { |
| err_str = "transport invalid\n"; |
| ret = -EINVAL; |
| goto out_err; |
| } |
| |
| info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| info->id = ida_alloc_min(&scmi_id, 0, GFP_KERNEL); |
| if (info->id < 0) |
| return info->id; |
| |
| info->dev = dev; |
| info->desc = desc; |
| info->bus_nb.notifier_call = scmi_bus_notifier; |
| info->dev_req_nb.notifier_call = scmi_device_request_notifier; |
| INIT_LIST_HEAD(&info->node); |
| idr_init(&info->protocols); |
| mutex_init(&info->protocols_mtx); |
| idr_init(&info->active_protocols); |
| mutex_init(&info->devreq_mtx); |
| |
| platform_set_drvdata(pdev, info); |
| idr_init(&info->tx_idr); |
| idr_init(&info->rx_idr); |
| |
| handle = &info->handle; |
| handle->dev = info->dev; |
| handle->version = &info->version; |
| handle->devm_protocol_acquire = scmi_devm_protocol_acquire; |
| handle->devm_protocol_get = scmi_devm_protocol_get; |
| handle->devm_protocol_put = scmi_devm_protocol_put; |
| |
| /* System wide atomic threshold for atomic ops .. if any */ |
| if (!of_property_read_u32(np, "atomic-threshold-us", |
| &info->atomic_threshold)) |
| dev_info(dev, |
| "SCMI System wide atomic threshold set to %d us\n", |
| info->atomic_threshold); |
| handle->is_transport_atomic = scmi_is_transport_atomic; |
| |
| /* Setup all channels described in the DT at first */ |
| ret = scmi_channels_setup(info); |
| if (ret) { |
| err_str = "failed to setup channels\n"; |
| goto clear_ida; |
| } |
| |
| ret = bus_register_notifier(&scmi_bus_type, &info->bus_nb); |
| if (ret) { |
| err_str = "failed to register bus notifier\n"; |
| goto clear_txrx_setup; |
| } |
| |
| ret = blocking_notifier_chain_register(&scmi_requested_devices_nh, |
| &info->dev_req_nb); |
| if (ret) { |
| err_str = "failed to register device notifier\n"; |
| goto clear_bus_notifier; |
| } |
| |
| ret = scmi_xfer_info_init(info); |
| if (ret) { |
| err_str = "failed to init xfers pool\n"; |
| goto clear_dev_req_notifier; |
| } |
| |
| if (scmi_top_dentry) { |
| info->dbg = scmi_debugfs_common_setup(info); |
| if (!info->dbg) |
| dev_warn(dev, "Failed to setup SCMI debugfs.\n"); |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) { |
| ret = scmi_debugfs_raw_mode_setup(info); |
| if (!coex) { |
| if (ret) |
| goto clear_dev_req_notifier; |
| |
| /* Bail out anyway when coex disabled. */ |
| return 0; |
| } |
| |
| /* Coex enabled, carry on in any case. */ |
| dev_info(dev, "SCMI RAW Mode COEX enabled !\n"); |
| } |
| } |
| |
| if (scmi_notification_init(handle)) |
| dev_err(dev, "SCMI Notifications NOT available.\n"); |
| |
| if (info->desc->atomic_enabled && |
| !is_transport_polling_capable(info->desc)) |
| dev_err(dev, |
| "Transport is not polling capable. Atomic mode not supported.\n"); |
| |
| /* |
| * Trigger SCMI Base protocol initialization. |
| * It's mandatory and won't be ever released/deinit until the |
| * SCMI stack is shutdown/unloaded as a whole. |
| */ |
| ret = scmi_protocol_acquire(handle, SCMI_PROTOCOL_BASE); |
| if (ret) { |
| err_str = "unable to communicate with SCMI\n"; |
| if (coex) { |
| dev_err(dev, "%s", err_str); |
| return 0; |
| } |
| goto notification_exit; |
| } |
| |
| mutex_lock(&scmi_list_mutex); |
| list_add_tail(&info->node, &scmi_list); |
| mutex_unlock(&scmi_list_mutex); |
| |
| for_each_available_child_of_node(np, child) { |
| u32 prot_id; |
| |
| if (of_property_read_u32(child, "reg", &prot_id)) |
| continue; |
| |
| if (!FIELD_FIT(MSG_PROTOCOL_ID_MASK, prot_id)) |
| dev_err(dev, "Out of range protocol %d\n", prot_id); |
| |
| if (!scmi_is_protocol_implemented(handle, prot_id)) { |
| dev_err(dev, "SCMI protocol %d not implemented\n", |
| prot_id); |
| continue; |
| } |
| |
| /* |
| * Save this valid DT protocol descriptor amongst |
| * @active_protocols for this SCMI instance/ |
| */ |
| ret = idr_alloc(&info->active_protocols, child, |
| prot_id, prot_id + 1, GFP_KERNEL); |
| if (ret != prot_id) { |
| dev_err(dev, "SCMI protocol %d already activated. Skip\n", |
| prot_id); |
| continue; |
| } |
| |
| of_node_get(child); |
| scmi_create_protocol_devices(child, info, prot_id, NULL); |
| } |
| |
| return 0; |
| |
| notification_exit: |
| if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) |
| scmi_raw_mode_cleanup(info->raw); |
| scmi_notification_exit(&info->handle); |
| clear_dev_req_notifier: |
| blocking_notifier_chain_unregister(&scmi_requested_devices_nh, |
| &info->dev_req_nb); |
| clear_bus_notifier: |
| bus_unregister_notifier(&scmi_bus_type, &info->bus_nb); |
| clear_txrx_setup: |
| scmi_cleanup_txrx_channels(info); |
| clear_ida: |
| ida_free(&scmi_id, info->id); |
| |
| out_err: |
| return dev_err_probe(dev, ret, "%s", err_str); |
| } |
| |
| static void scmi_remove(struct platform_device *pdev) |
| { |
| int id; |
| struct scmi_info *info = platform_get_drvdata(pdev); |
| struct device_node *child; |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) |
| scmi_raw_mode_cleanup(info->raw); |
| |
| mutex_lock(&scmi_list_mutex); |
| if (info->users) |
| dev_warn(&pdev->dev, |
| "Still active SCMI users will be forcibly unbound.\n"); |
| list_del(&info->node); |
| mutex_unlock(&scmi_list_mutex); |
| |
| scmi_notification_exit(&info->handle); |
| |
| mutex_lock(&info->protocols_mtx); |
| idr_destroy(&info->protocols); |
| mutex_unlock(&info->protocols_mtx); |
| |
| idr_for_each_entry(&info->active_protocols, child, id) |
| of_node_put(child); |
| idr_destroy(&info->active_protocols); |
| |
| blocking_notifier_chain_unregister(&scmi_requested_devices_nh, |
| &info->dev_req_nb); |
| bus_unregister_notifier(&scmi_bus_type, &info->bus_nb); |
| |
| /* Safe to free channels since no more users */ |
| scmi_cleanup_txrx_channels(info); |
| |
| ida_free(&scmi_id, info->id); |
| } |
| |
| static ssize_t protocol_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scmi_info *info = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%u.%u\n", info->version.major_ver, |
| info->version.minor_ver); |
| } |
| static DEVICE_ATTR_RO(protocol_version); |
| |
| static ssize_t firmware_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scmi_info *info = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "0x%x\n", info->version.impl_ver); |
| } |
| static DEVICE_ATTR_RO(firmware_version); |
| |
| static ssize_t vendor_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scmi_info *info = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", info->version.vendor_id); |
| } |
| static DEVICE_ATTR_RO(vendor_id); |
| |
| static ssize_t sub_vendor_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct scmi_info *info = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", info->version.sub_vendor_id); |
| } |
| static DEVICE_ATTR_RO(sub_vendor_id); |
| |
| static struct attribute *versions_attrs[] = { |
| &dev_attr_firmware_version.attr, |
| &dev_attr_protocol_version.attr, |
| &dev_attr_vendor_id.attr, |
| &dev_attr_sub_vendor_id.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(versions); |
| |
| static struct platform_driver scmi_driver = { |
| .driver = { |
| .name = "arm-scmi", |
| .suppress_bind_attrs = true, |
| .dev_groups = versions_groups, |
| }, |
| .probe = scmi_probe, |
| .remove_new = scmi_remove, |
| }; |
| |
| static struct dentry *scmi_debugfs_init(void) |
| { |
| struct dentry *d; |
| |
| d = debugfs_create_dir("scmi", NULL); |
| if (IS_ERR(d)) { |
| pr_err("Could NOT create SCMI top dentry.\n"); |
| return NULL; |
| } |
| |
| return d; |
| } |
| |
| static int __init scmi_driver_init(void) |
| { |
| /* Bail out if no SCMI transport was configured */ |
| if (WARN_ON(!IS_ENABLED(CONFIG_ARM_SCMI_HAVE_TRANSPORT))) |
| return -EINVAL; |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_HAVE_SHMEM)) |
| scmi_trans_core_ops.shmem = scmi_shared_mem_operations_get(); |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_HAVE_MSG)) |
| scmi_trans_core_ops.msg = scmi_message_operations_get(); |
| |
| if (IS_ENABLED(CONFIG_ARM_SCMI_NEED_DEBUGFS)) |
| scmi_top_dentry = scmi_debugfs_init(); |
| |
| scmi_base_register(); |
| |
| scmi_clock_register(); |
| scmi_perf_register(); |
| scmi_power_register(); |
| scmi_reset_register(); |
| scmi_sensors_register(); |
| scmi_voltage_register(); |
| scmi_system_register(); |
| scmi_powercap_register(); |
| scmi_pinctrl_register(); |
| |
| return platform_driver_register(&scmi_driver); |
| } |
| module_init(scmi_driver_init); |
| |
| static void __exit scmi_driver_exit(void) |
| { |
| scmi_base_unregister(); |
| |
| scmi_clock_unregister(); |
| scmi_perf_unregister(); |
| scmi_power_unregister(); |
| scmi_reset_unregister(); |
| scmi_sensors_unregister(); |
| scmi_voltage_unregister(); |
| scmi_system_unregister(); |
| scmi_powercap_unregister(); |
| scmi_pinctrl_unregister(); |
| |
| platform_driver_unregister(&scmi_driver); |
| |
| debugfs_remove_recursive(scmi_top_dentry); |
| } |
| module_exit(scmi_driver_exit); |
| |
| MODULE_ALIAS("platform:arm-scmi"); |
| MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); |
| MODULE_DESCRIPTION("ARM SCMI protocol driver"); |
| MODULE_LICENSE("GPL v2"); |