| /* SPDX-License-Identifier: MIT */ |
| /* |
| * Copyright © 2023 Intel Corporation |
| */ |
| |
| #ifndef _ABI_GUC_ACTIONS_SRIOV_ABI_H |
| #define _ABI_GUC_ACTIONS_SRIOV_ABI_H |
| |
| #include "guc_communication_ctb_abi.h" |
| |
| /** |
| * DOC: GUC2PF_RELAY_FROM_VF |
| * |
| * This message is used by the GuC firmware to forward a VF2PF `Relay Message`_ |
| * received from the Virtual Function (VF) driver to this Physical Function (PF) |
| * driver. |
| * |
| * This message is always sent as `CTB HXG Message`_. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_GUC_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`XE_GUC_ACTION_GUC2PF_RELAY_FROM_VF` = 0x5100 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:0 | **VFID** - source VF identifier | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 2 | 31:0 | **RELAY_ID** - VF/PF message ID | |
| * +---+-------+-----------------+--------------------------------------------+ |
| * | 3 | 31:0 | **RELAY_DATA1** | | |
| * +---+-------+-----------------+ | |
| * |...| | | [Embedded `Relay Message`_] | |
| * +---+-------+-----------------+ | |
| * | n | 31:0 | **RELAY_DATAx** | | |
| * +---+-------+-----------------+--------------------------------------------+ |
| */ |
| #define XE_GUC_ACTION_GUC2PF_RELAY_FROM_VF 0x5100 |
| |
| #define GUC2PF_RELAY_FROM_VF_EVENT_MSG_MIN_LEN (GUC_HXG_EVENT_MSG_MIN_LEN + 2u) |
| #define GUC2PF_RELAY_FROM_VF_EVENT_MSG_MAX_LEN \ |
| (GUC2PF_RELAY_FROM_VF_EVENT_MSG_MIN_LEN + GUC_RELAY_MSG_MAX_LEN) |
| #define GUC2PF_RELAY_FROM_VF_EVENT_MSG_0_MBZ GUC_HXG_EVENT_MSG_0_DATA0 |
| #define GUC2PF_RELAY_FROM_VF_EVENT_MSG_1_VFID GUC_HXG_EVENT_MSG_n_DATAn |
| #define GUC2PF_RELAY_FROM_VF_EVENT_MSG_2_RELAY_ID GUC_HXG_EVENT_MSG_n_DATAn |
| #define GUC2PF_RELAY_FROM_VF_EVENT_MSG_3_RELAY_DATA1 GUC_HXG_EVENT_MSG_n_DATAn |
| #define GUC2PF_RELAY_FROM_VF_EVENT_MSG_n_RELAY_DATAx GUC_HXG_EVENT_MSG_n_DATAn |
| #define GUC2PF_RELAY_FROM_VF_EVENT_MSG_NUM_RELAY_DATA GUC_RELAY_MSG_MAX_LEN |
| |
| /** |
| * DOC: PF2GUC_RELAY_TO_VF |
| * |
| * This H2G message is used by the Physical Function (PF) driver to send embedded |
| * VF2PF `Relay Message`_ to the VF. |
| * |
| * This action message must be sent over CTB as `CTB HXG Message`_. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_HOST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = `GUC_HXG_TYPE_FAST_REQUEST`_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`XE_GUC_ACTION_PF2GUC_RELAY_TO_VF` = 0x5101 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:0 | **VFID** - target VF identifier | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 2 | 31:0 | **RELAY_ID** - VF/PF message ID | |
| * +---+-------+-----------------+--------------------------------------------+ |
| * | 3 | 31:0 | **RELAY_DATA1** | | |
| * +---+-------+-----------------+ | |
| * |...| | | [Embedded `Relay Message`_] | |
| * +---+-------+-----------------+ | |
| * | n | 31:0 | **RELAY_DATAx** | | |
| * +---+-------+-----------------+--------------------------------------------+ |
| */ |
| #define XE_GUC_ACTION_PF2GUC_RELAY_TO_VF 0x5101 |
| |
| #define PF2GUC_RELAY_TO_VF_REQUEST_MSG_MIN_LEN (GUC_HXG_REQUEST_MSG_MIN_LEN + 2u) |
| #define PF2GUC_RELAY_TO_VF_REQUEST_MSG_MAX_LEN \ |
| (PF2GUC_RELAY_TO_VF_REQUEST_MSG_MIN_LEN + GUC_RELAY_MSG_MAX_LEN) |
| #define PF2GUC_RELAY_TO_VF_REQUEST_MSG_0_MBZ GUC_HXG_REQUEST_MSG_0_DATA0 |
| #define PF2GUC_RELAY_TO_VF_REQUEST_MSG_1_VFID GUC_HXG_REQUEST_MSG_n_DATAn |
| #define PF2GUC_RELAY_TO_VF_REQUEST_MSG_2_RELAY_ID GUC_HXG_REQUEST_MSG_n_DATAn |
| #define PF2GUC_RELAY_TO_VF_REQUEST_MSG_3_RELAY_DATA1 GUC_HXG_REQUEST_MSG_n_DATAn |
| #define PF2GUC_RELAY_TO_VF_REQUEST_MSG_n_RELAY_DATAx GUC_HXG_REQUEST_MSG_n_DATAn |
| #define PF2GUC_RELAY_TO_VF_REQUEST_MSG_NUM_RELAY_DATA GUC_RELAY_MSG_MAX_LEN |
| |
| /** |
| * DOC: GUC2VF_RELAY_FROM_PF |
| * |
| * This message is used by the GuC firmware to deliver `Relay Message`_ from the |
| * Physical Function (PF) driver to this Virtual Function (VF) driver. |
| * See `GuC Relay Communication`_ for details. |
| * |
| * This message is always sent over CTB. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_GUC_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`XE_GUC_ACTION_GUC2VF_RELAY_FROM_PF` = 0x5102 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:0 | **RELAY_ID** - VF/PF message ID | |
| * +---+-------+-----------------+--------------------------------------------+ |
| * | 2 | 31:0 | **RELAY_DATA1** | | |
| * +---+-------+-----------------+ | |
| * |...| | | [Embedded `Relay Message`_] | |
| * +---+-------+-----------------+ | |
| * | n | 31:0 | **RELAY_DATAx** | | |
| * +---+-------+-----------------+--------------------------------------------+ |
| */ |
| #define XE_GUC_ACTION_GUC2VF_RELAY_FROM_PF 0x5102 |
| |
| #define GUC2VF_RELAY_FROM_PF_EVENT_MSG_MIN_LEN (GUC_HXG_EVENT_MSG_MIN_LEN + 1u) |
| #define GUC2VF_RELAY_FROM_PF_EVENT_MSG_MAX_LEN \ |
| (GUC2VF_RELAY_FROM_PF_EVENT_MSG_MIN_LEN + GUC_RELAY_MSG_MAX_LEN) |
| #define GUC2VF_RELAY_FROM_PF_EVENT_MSG_0_MBZ GUC_HXG_EVENT_MSG_0_DATA0 |
| #define GUC2VF_RELAY_FROM_PF_EVENT_MSG_1_RELAY_ID GUC_HXG_EVENT_MSG_n_DATAn |
| #define GUC2VF_RELAY_FROM_PF_EVENT_MSG_n_RELAY_DATAx GUC_HXG_EVENT_MSG_n_DATAn |
| #define GUC2VF_RELAY_FROM_PF_EVENT_MSG_NUM_RELAY_DATA GUC_RELAY_MSG_MAX_LEN |
| |
| /** |
| * DOC: VF2GUC_RELAY_TO_PF |
| * |
| * This message is used by the Virtual Function (VF) drivers to communicate with |
| * the Physical Function (PF) driver and send `Relay Message`_ to the PF driver. |
| * See `GuC Relay Communication`_ for details. |
| * |
| * This message must be sent over CTB. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_HOST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ or GUC_HXG_TYPE_FAST_REQUEST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`XE_GUC_ACTION_VF2GUC_RELAY_TO_PF` = 0x5103 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:0 | **RELAY_ID** - VF/PF message ID | |
| * +---+-------+-----------------+--------------------------------------------+ |
| * | 2 | 31:0 | **RELAY_DATA1** | | |
| * +---+-------+-----------------+ | |
| * |...| | | [Embedded `Relay Message`_] | |
| * +---+-------+-----------------+ | |
| * | n | 31:0 | **RELAY_DATAx** | | |
| * +---+-------+-----------------+--------------------------------------------+ |
| */ |
| #define XE_GUC_ACTION_VF2GUC_RELAY_TO_PF 0x5103 |
| |
| #define VF2GUC_RELAY_TO_PF_REQUEST_MSG_MIN_LEN (GUC_HXG_REQUEST_MSG_MIN_LEN + 1u) |
| #define VF2GUC_RELAY_TO_PF_REQUEST_MSG_MAX_LEN \ |
| (VF2GUC_RELAY_TO_PF_REQUEST_MSG_MIN_LEN + GUC_RELAY_MSG_MAX_LEN) |
| #define VF2GUC_RELAY_TO_PF_REQUEST_MSG_0_MBZ GUC_HXG_REQUEST_MSG_0_DATA0 |
| #define VF2GUC_RELAY_TO_PF_REQUEST_MSG_1_RELAY_ID GUC_HXG_REQUEST_MSG_n_DATAn |
| #define VF2GUC_RELAY_TO_PF_REQUEST_MSG_n_RELAY_DATAx GUC_HXG_REQUEST_MSG_n_DATAn |
| #define VF2GUC_RELAY_TO_PF_REQUEST_MSG_NUM_RELAY_DATA GUC_RELAY_MSG_MAX_LEN |
| |
| /** |
| * DOC: GUC2PF_VF_STATE_NOTIFY |
| * |
| * The GUC2PF_VF_STATE_NOTIFY message is used by the GuC to notify PF about change |
| * of the VF state. |
| * |
| * This G2H message is sent as `CTB HXG Message`_. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_GUC_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | DATA0 = MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`GUC_ACTION_GUC2PF_VF_STATE_NOTIFY` = 0x5106 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:0 | DATA1 = **VFID** - VF identifier | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 2 | 31:0 | DATA2 = **EVENT** - notification event: | |
| * | | | | |
| * | | | - _`GUC_PF_NOTIFY_VF_ENABLE` = 1 (only if VFID = 0) | |
| * | | | - _`GUC_PF_NOTIFY_VF_FLR` = 1 | |
| * | | | - _`GUC_PF_NOTIFY_VF_FLR_DONE` = 2 | |
| * | | | - _`GUC_PF_NOTIFY_VF_PAUSE_DONE` = 3 | |
| * | | | - _`GUC_PF_NOTIFY_VF_FIXUP_DONE` = 4 | |
| * +---+-------+--------------------------------------------------------------+ |
| */ |
| #define GUC_ACTION_GUC2PF_VF_STATE_NOTIFY 0x5106u |
| |
| #define GUC2PF_VF_STATE_NOTIFY_EVENT_MSG_LEN (GUC_HXG_EVENT_MSG_MIN_LEN + 2u) |
| #define GUC2PF_VF_STATE_NOTIFY_EVENT_MSG_0_MBZ GUC_HXG_EVENT_MSG_0_DATA0 |
| #define GUC2PF_VF_STATE_NOTIFY_EVENT_MSG_1_VFID GUC_HXG_EVENT_MSG_n_DATAn |
| #define GUC2PF_VF_STATE_NOTIFY_EVENT_MSG_2_EVENT GUC_HXG_EVENT_MSG_n_DATAn |
| #define GUC_PF_NOTIFY_VF_ENABLE 1u |
| #define GUC_PF_NOTIFY_VF_FLR 1u |
| #define GUC_PF_NOTIFY_VF_FLR_DONE 2u |
| #define GUC_PF_NOTIFY_VF_PAUSE_DONE 3u |
| #define GUC_PF_NOTIFY_VF_FIXUP_DONE 4u |
| |
| /** |
| * DOC: PF2GUC_UPDATE_VGT_POLICY |
| * |
| * This message is used by the PF to set `GuC VGT Policy KLVs`_. |
| * |
| * This message must be sent as `CTB HXG Message`_. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_HOST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`GUC_ACTION_PF2GUC_UPDATE_VGT_POLICY` = 0x5502 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:0 | **CFG_ADDR_LO** - dword aligned GGTT offset that | |
| * | | | represents the start of `GuC VGT Policy KLVs`_ list. | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 2 | 31:0 | **CFG_ADDR_HI** - upper 32 bits of above offset. | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 3 | 31:0 | **CFG_SIZE** - size (in dwords) of the config buffer | |
| * +---+-------+--------------------------------------------------------------+ |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_GUC_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:0 | **COUNT** - number of KLVs successfully applied | |
| * +---+-------+--------------------------------------------------------------+ |
| */ |
| #define GUC_ACTION_PF2GUC_UPDATE_VGT_POLICY 0x5502u |
| |
| #define PF2GUC_UPDATE_VGT_POLICY_REQUEST_MSG_LEN (GUC_HXG_REQUEST_MSG_MIN_LEN + 3u) |
| #define PF2GUC_UPDATE_VGT_POLICY_REQUEST_MSG_0_MBZ GUC_HXG_REQUEST_MSG_0_DATA0 |
| #define PF2GUC_UPDATE_VGT_POLICY_REQUEST_MSG_1_CFG_ADDR_LO GUC_HXG_REQUEST_MSG_n_DATAn |
| #define PF2GUC_UPDATE_VGT_POLICY_REQUEST_MSG_2_CFG_ADDR_HI GUC_HXG_REQUEST_MSG_n_DATAn |
| #define PF2GUC_UPDATE_VGT_POLICY_REQUEST_MSG_3_CFG_SIZE GUC_HXG_REQUEST_MSG_n_DATAn |
| |
| #define PF2GUC_UPDATE_VGT_POLICY_RESPONSE_MSG_LEN GUC_HXG_RESPONSE_MSG_MIN_LEN |
| #define PF2GUC_UPDATE_VGT_POLICY_RESPONSE_MSG_0_COUNT GUC_HXG_RESPONSE_MSG_0_DATA0 |
| |
| /** |
| * DOC: PF2GUC_UPDATE_VF_CFG |
| * |
| * The `PF2GUC_UPDATE_VF_CFG`_ message is used by PF to provision single VF in GuC. |
| * |
| * This message must be sent as `CTB HXG Message`_. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_HOST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`GUC_ACTION_PF2GUC_UPDATE_VF_CFG` = 0x5503 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:0 | **VFID** - identifier of the VF that the KLV | |
| * | | | configurations are being applied to | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 2 | 31:0 | **CFG_ADDR_LO** - dword aligned GGTT offset that represents | |
| * | | | the start of a list of virtualization related KLV configs | |
| * | | | that are to be applied to the VF. | |
| * | | | If this parameter is zero, the list is not parsed. | |
| * | | | If full configs address parameter is zero and configs_size is| |
| * | | | zero associated VF config shall be reset to its default state| |
| * +---+-------+--------------------------------------------------------------+ |
| * | 3 | 31:0 | **CFG_ADDR_HI** - upper 32 bits of configs address. | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 4 | 31:0 | **CFG_SIZE** - size (in dwords) of the config buffer | |
| * +---+-------+--------------------------------------------------------------+ |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_GUC_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:0 | **COUNT** - number of KLVs successfully applied | |
| * +---+-------+--------------------------------------------------------------+ |
| */ |
| #define GUC_ACTION_PF2GUC_UPDATE_VF_CFG 0x5503u |
| |
| #define PF2GUC_UPDATE_VF_CFG_REQUEST_MSG_LEN (GUC_HXG_REQUEST_MSG_MIN_LEN + 4u) |
| #define PF2GUC_UPDATE_VF_CFG_REQUEST_MSG_0_MBZ GUC_HXG_REQUEST_MSG_0_DATA0 |
| #define PF2GUC_UPDATE_VF_CFG_REQUEST_MSG_1_VFID GUC_HXG_REQUEST_MSG_n_DATAn |
| #define PF2GUC_UPDATE_VF_CFG_REQUEST_MSG_2_CFG_ADDR_LO GUC_HXG_REQUEST_MSG_n_DATAn |
| #define PF2GUC_UPDATE_VF_CFG_REQUEST_MSG_3_CFG_ADDR_HI GUC_HXG_REQUEST_MSG_n_DATAn |
| #define PF2GUC_UPDATE_VF_CFG_REQUEST_MSG_4_CFG_SIZE GUC_HXG_REQUEST_MSG_n_DATAn |
| |
| #define PF2GUC_UPDATE_VF_CFG_RESPONSE_MSG_LEN GUC_HXG_RESPONSE_MSG_MIN_LEN |
| #define PF2GUC_UPDATE_VF_CFG_RESPONSE_MSG_0_COUNT GUC_HXG_RESPONSE_MSG_0_DATA0 |
| |
| /** |
| * DOC: PF2GUC_VF_CONTROL |
| * |
| * The PF2GUC_VF_CONTROL message is used by the PF to trigger VF state change |
| * maintained by the GuC. |
| * |
| * This H2G message must be sent as `CTB HXG Message`_. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_HOST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | DATA0 = MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`GUC_ACTION_PF2GUC_VF_CONTROL_CMD` = 0x5506 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:0 | DATA1 = **VFID** - VF identifier | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 2 | 31:0 | DATA2 = **COMMAND** - control command: | |
| * | | | | |
| * | | | - _`GUC_PF_TRIGGER_VF_PAUSE` = 1 | |
| * | | | - _`GUC_PF_TRIGGER_VF_RESUME` = 2 | |
| * | | | - _`GUC_PF_TRIGGER_VF_STOP` = 3 | |
| * | | | - _`GUC_PF_TRIGGER_VF_FLR_START` = 4 | |
| * | | | - _`GUC_PF_TRIGGER_VF_FLR_FINISH` = 5 | |
| * +---+-------+--------------------------------------------------------------+ |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_GUC_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:0 | DATA0 = MBZ | |
| * +---+-------+--------------------------------------------------------------+ |
| */ |
| #define GUC_ACTION_PF2GUC_VF_CONTROL 0x5506u |
| |
| #define PF2GUC_VF_CONTROL_REQUEST_MSG_LEN (GUC_HXG_EVENT_MSG_MIN_LEN + 2u) |
| #define PF2GUC_VF_CONTROL_REQUEST_MSG_0_MBZ GUC_HXG_EVENT_MSG_0_DATA0 |
| #define PF2GUC_VF_CONTROL_REQUEST_MSG_1_VFID GUC_HXG_EVENT_MSG_n_DATAn |
| #define PF2GUC_VF_CONTROL_REQUEST_MSG_2_COMMAND GUC_HXG_EVENT_MSG_n_DATAn |
| #define GUC_PF_TRIGGER_VF_PAUSE 1u |
| #define GUC_PF_TRIGGER_VF_RESUME 2u |
| #define GUC_PF_TRIGGER_VF_STOP 3u |
| #define GUC_PF_TRIGGER_VF_FLR_START 4u |
| #define GUC_PF_TRIGGER_VF_FLR_FINISH 5u |
| |
| #endif |
