| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Aic94xx SAS/SATA driver access to shared data structures and memory |
| * maps. |
| * |
| * Copyright (C) 2005 Adaptec, Inc. All rights reserved. |
| * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| |
| #include "aic94xx.h" |
| #include "aic94xx_reg.h" |
| #include "aic94xx_sds.h" |
| |
| /* ---------- OCM stuff ---------- */ |
| |
| struct asd_ocm_dir_ent { |
| u8 type; |
| u8 offs[3]; |
| u8 _r1; |
| u8 size[3]; |
| } __attribute__ ((packed)); |
| |
| struct asd_ocm_dir { |
| char sig[2]; |
| u8 _r1[2]; |
| u8 major; /* 0 */ |
| u8 minor; /* 0 */ |
| u8 _r2; |
| u8 num_de; |
| struct asd_ocm_dir_ent entry[15]; |
| } __attribute__ ((packed)); |
| |
| #define OCM_DE_OCM_DIR 0x00 |
| #define OCM_DE_WIN_DRVR 0x01 |
| #define OCM_DE_BIOS_CHIM 0x02 |
| #define OCM_DE_RAID_ENGN 0x03 |
| #define OCM_DE_BIOS_INTL 0x04 |
| #define OCM_DE_BIOS_CHIM_OSM 0x05 |
| #define OCM_DE_BIOS_CHIM_DYNAMIC 0x06 |
| #define OCM_DE_ADDC2C_RES0 0x07 |
| #define OCM_DE_ADDC2C_RES1 0x08 |
| #define OCM_DE_ADDC2C_RES2 0x09 |
| #define OCM_DE_ADDC2C_RES3 0x0A |
| |
| #define OCM_INIT_DIR_ENTRIES 5 |
| /*************************************************************************** |
| * OCM directory default |
| ***************************************************************************/ |
| static struct asd_ocm_dir OCMDirInit = |
| { |
| .sig = {0x4D, 0x4F}, /* signature */ |
| .num_de = OCM_INIT_DIR_ENTRIES, /* no. of directory entries */ |
| }; |
| |
| /*************************************************************************** |
| * OCM directory Entries default |
| ***************************************************************************/ |
| static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] = |
| { |
| { |
| .type = (OCM_DE_ADDC2C_RES0), /* Entry type */ |
| .offs = {128}, /* Offset */ |
| .size = {0, 4}, /* size */ |
| }, |
| { |
| .type = (OCM_DE_ADDC2C_RES1), /* Entry type */ |
| .offs = {128, 4}, /* Offset */ |
| .size = {0, 4}, /* size */ |
| }, |
| { |
| .type = (OCM_DE_ADDC2C_RES2), /* Entry type */ |
| .offs = {128, 8}, /* Offset */ |
| .size = {0, 4}, /* size */ |
| }, |
| { |
| .type = (OCM_DE_ADDC2C_RES3), /* Entry type */ |
| .offs = {128, 12}, /* Offset */ |
| .size = {0, 4}, /* size */ |
| }, |
| { |
| .type = (OCM_DE_WIN_DRVR), /* Entry type */ |
| .offs = {128, 16}, /* Offset */ |
| .size = {128, 235, 1}, /* size */ |
| }, |
| }; |
| |
| struct asd_bios_chim_struct { |
| char sig[4]; |
| u8 major; /* 1 */ |
| u8 minor; /* 0 */ |
| u8 bios_major; |
| u8 bios_minor; |
| __le32 bios_build; |
| u8 flags; |
| u8 pci_slot; |
| __le16 ue_num; |
| __le16 ue_size; |
| u8 _r[14]; |
| /* The unit element array is right here. |
| */ |
| } __attribute__ ((packed)); |
| |
| /** |
| * asd_read_ocm_seg - read an on chip memory (OCM) segment |
| * @asd_ha: pointer to the host adapter structure |
| * @buffer: where to write the read data |
| * @offs: offset into OCM where to read from |
| * @size: how many bytes to read |
| * |
| * Return the number of bytes not read. Return 0 on success. |
| */ |
| static int asd_read_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer, |
| u32 offs, int size) |
| { |
| u8 *p = buffer; |
| if (unlikely(asd_ha->iospace)) |
| asd_read_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size); |
| else { |
| for ( ; size > 0; size--, offs++, p++) |
| *p = asd_read_ocm_byte(asd_ha, offs); |
| } |
| return size; |
| } |
| |
| static int asd_read_ocm_dir(struct asd_ha_struct *asd_ha, |
| struct asd_ocm_dir *dir, u32 offs) |
| { |
| int err = asd_read_ocm_seg(asd_ha, dir, offs, sizeof(*dir)); |
| if (err) { |
| ASD_DPRINTK("couldn't read ocm segment\n"); |
| return err; |
| } |
| |
| if (dir->sig[0] != 'M' || dir->sig[1] != 'O') { |
| ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n", |
| dir->sig[0], dir->sig[1]); |
| return -ENOENT; |
| } |
| if (dir->major != 0) { |
| asd_printk("unsupported major version of ocm dir:0x%x\n", |
| dir->major); |
| return -ENOENT; |
| } |
| dir->num_de &= 0xf; |
| return 0; |
| } |
| |
| /** |
| * asd_write_ocm_seg - write an on chip memory (OCM) segment |
| * @asd_ha: pointer to the host adapter structure |
| * @buffer: where to read the write data |
| * @offs: offset into OCM to write to |
| * @size: how many bytes to write |
| * |
| * Return the number of bytes not written. Return 0 on success. |
| */ |
| static void asd_write_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer, |
| u32 offs, int size) |
| { |
| u8 *p = buffer; |
| if (unlikely(asd_ha->iospace)) |
| asd_write_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size); |
| else { |
| for ( ; size > 0; size--, offs++, p++) |
| asd_write_ocm_byte(asd_ha, offs, *p); |
| } |
| return; |
| } |
| |
| #define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16)) |
| |
| static int asd_find_dir_entry(struct asd_ocm_dir *dir, u8 type, |
| u32 *offs, u32 *size) |
| { |
| int i; |
| struct asd_ocm_dir_ent *ent; |
| |
| for (i = 0; i < dir->num_de; i++) { |
| if (dir->entry[i].type == type) |
| break; |
| } |
| if (i >= dir->num_de) |
| return -ENOENT; |
| ent = &dir->entry[i]; |
| *offs = (u32) THREE_TO_NUM(ent->offs); |
| *size = (u32) THREE_TO_NUM(ent->size); |
| return 0; |
| } |
| |
| #define OCM_BIOS_CHIM_DE 2 |
| #define BC_BIOS_PRESENT 1 |
| |
| static int asd_get_bios_chim(struct asd_ha_struct *asd_ha, |
| struct asd_ocm_dir *dir) |
| { |
| int err; |
| struct asd_bios_chim_struct *bc_struct; |
| u32 offs, size; |
| |
| err = asd_find_dir_entry(dir, OCM_BIOS_CHIM_DE, &offs, &size); |
| if (err) { |
| ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n"); |
| goto out; |
| } |
| err = -ENOMEM; |
| bc_struct = kmalloc(sizeof(*bc_struct), GFP_KERNEL); |
| if (!bc_struct) { |
| asd_printk("no memory for bios_chim struct\n"); |
| goto out; |
| } |
| err = asd_read_ocm_seg(asd_ha, (void *)bc_struct, offs, |
| sizeof(*bc_struct)); |
| if (err) { |
| ASD_DPRINTK("couldn't read ocm segment\n"); |
| goto out2; |
| } |
| if (strncmp(bc_struct->sig, "SOIB", 4) |
| && strncmp(bc_struct->sig, "IPSA", 4)) { |
| ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n", |
| bc_struct->sig[0], bc_struct->sig[1], |
| bc_struct->sig[2], bc_struct->sig[3]); |
| err = -ENOENT; |
| goto out2; |
| } |
| if (bc_struct->major != 1) { |
| asd_printk("BIOS_CHIM unsupported major version:0x%x\n", |
| bc_struct->major); |
| err = -ENOENT; |
| goto out2; |
| } |
| if (bc_struct->flags & BC_BIOS_PRESENT) { |
| asd_ha->hw_prof.bios.present = 1; |
| asd_ha->hw_prof.bios.maj = bc_struct->bios_major; |
| asd_ha->hw_prof.bios.min = bc_struct->bios_minor; |
| asd_ha->hw_prof.bios.bld = le32_to_cpu(bc_struct->bios_build); |
| ASD_DPRINTK("BIOS present (%d,%d), %d\n", |
| asd_ha->hw_prof.bios.maj, |
| asd_ha->hw_prof.bios.min, |
| asd_ha->hw_prof.bios.bld); |
| } |
| asd_ha->hw_prof.ue.num = le16_to_cpu(bc_struct->ue_num); |
| asd_ha->hw_prof.ue.size= le16_to_cpu(bc_struct->ue_size); |
| ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha->hw_prof.ue.num, |
| asd_ha->hw_prof.ue.size); |
| size = asd_ha->hw_prof.ue.num * asd_ha->hw_prof.ue.size; |
| if (size > 0) { |
| err = -ENOMEM; |
| asd_ha->hw_prof.ue.area = kmalloc(size, GFP_KERNEL); |
| if (!asd_ha->hw_prof.ue.area) |
| goto out2; |
| err = asd_read_ocm_seg(asd_ha, (void *)asd_ha->hw_prof.ue.area, |
| offs + sizeof(*bc_struct), size); |
| if (err) { |
| kfree(asd_ha->hw_prof.ue.area); |
| asd_ha->hw_prof.ue.area = NULL; |
| asd_ha->hw_prof.ue.num = 0; |
| asd_ha->hw_prof.ue.size = 0; |
| ASD_DPRINTK("couldn't read ue entries(%d)\n", err); |
| } |
| } |
| out2: |
| kfree(bc_struct); |
| out: |
| return err; |
| } |
| |
| static void |
| asd_hwi_initialize_ocm_dir (struct asd_ha_struct *asd_ha) |
| { |
| int i; |
| |
| /* Zero OCM */ |
| for (i = 0; i < OCM_MAX_SIZE; i += 4) |
| asd_write_ocm_dword(asd_ha, i, 0); |
| |
| /* Write Dir */ |
| asd_write_ocm_seg(asd_ha, &OCMDirInit, 0, |
| sizeof(struct asd_ocm_dir)); |
| |
| /* Write Dir Entries */ |
| for (i = 0; i < OCM_INIT_DIR_ENTRIES; i++) |
| asd_write_ocm_seg(asd_ha, &OCMDirEntriesInit[i], |
| sizeof(struct asd_ocm_dir) + |
| (i * sizeof(struct asd_ocm_dir_ent)) |
| , sizeof(struct asd_ocm_dir_ent)); |
| |
| } |
| |
| static int |
| asd_hwi_check_ocm_access (struct asd_ha_struct *asd_ha) |
| { |
| struct pci_dev *pcidev = asd_ha->pcidev; |
| u32 reg; |
| int err = 0; |
| u32 v; |
| |
| /* check if OCM has been initialized by BIOS */ |
| reg = asd_read_reg_dword(asd_ha, EXSICNFGR); |
| |
| if (!(reg & OCMINITIALIZED)) { |
| err = pci_read_config_dword(pcidev, PCIC_INTRPT_STAT, &v); |
| if (err) { |
| asd_printk("couldn't access PCIC_INTRPT_STAT of %s\n", |
| pci_name(pcidev)); |
| goto out; |
| } |
| |
| printk(KERN_INFO "OCM is not initialized by BIOS," |
| "reinitialize it and ignore it, current IntrptStatus" |
| "is 0x%x\n", v); |
| |
| if (v) |
| err = pci_write_config_dword(pcidev, |
| PCIC_INTRPT_STAT, v); |
| if (err) { |
| asd_printk("couldn't write PCIC_INTRPT_STAT of %s\n", |
| pci_name(pcidev)); |
| goto out; |
| } |
| |
| asd_hwi_initialize_ocm_dir(asd_ha); |
| |
| } |
| out: |
| return err; |
| } |
| |
| /** |
| * asd_read_ocm - read on chip memory (OCM) |
| * @asd_ha: pointer to the host adapter structure |
| */ |
| int asd_read_ocm(struct asd_ha_struct *asd_ha) |
| { |
| int err; |
| struct asd_ocm_dir *dir; |
| |
| if (asd_hwi_check_ocm_access(asd_ha)) |
| return -1; |
| |
| dir = kmalloc(sizeof(*dir), GFP_KERNEL); |
| if (!dir) { |
| asd_printk("no memory for ocm dir\n"); |
| return -ENOMEM; |
| } |
| |
| err = asd_read_ocm_dir(asd_ha, dir, 0); |
| if (err) |
| goto out; |
| |
| err = asd_get_bios_chim(asd_ha, dir); |
| out: |
| kfree(dir); |
| return err; |
| } |
| |
| /* ---------- FLASH stuff ---------- */ |
| |
| #define FLASH_RESET 0xF0 |
| |
| #define ASD_FLASH_SIZE 0x200000 |
| #define FLASH_DIR_COOKIE "*** ADAPTEC FLASH DIRECTORY *** " |
| #define FLASH_NEXT_ENTRY_OFFS 0x2000 |
| #define FLASH_MAX_DIR_ENTRIES 32 |
| |
| #define FLASH_DE_TYPE_MASK 0x3FFFFFFF |
| #define FLASH_DE_MS 0x120 |
| #define FLASH_DE_CTRL_A_USER 0xE0 |
| |
| struct asd_flash_de { |
| __le32 type; |
| __le32 offs; |
| __le32 pad_size; |
| __le32 image_size; |
| __le32 chksum; |
| u8 _r[12]; |
| u8 version[32]; |
| } __attribute__ ((packed)); |
| |
| struct asd_flash_dir { |
| u8 cookie[32]; |
| __le32 rev; /* 2 */ |
| __le32 chksum; |
| __le32 chksum_antidote; |
| __le32 bld; |
| u8 bld_id[32]; /* build id data */ |
| u8 ver_data[32]; /* date and time of build */ |
| __le32 ae_mask; |
| __le32 v_mask; |
| __le32 oc_mask; |
| u8 _r[20]; |
| struct asd_flash_de dir_entry[FLASH_MAX_DIR_ENTRIES]; |
| } __attribute__ ((packed)); |
| |
| struct asd_manuf_sec { |
| char sig[2]; /* 'S', 'M' */ |
| u16 offs_next; |
| u8 maj; /* 0 */ |
| u8 min; /* 0 */ |
| u16 chksum; |
| u16 size; |
| u8 _r[6]; |
| u8 sas_addr[SAS_ADDR_SIZE]; |
| u8 pcba_sn[ASD_PCBA_SN_SIZE]; |
| /* Here start the other segments */ |
| u8 linked_list[0]; |
| } __attribute__ ((packed)); |
| |
| struct asd_manuf_phy_desc { |
| u8 state; /* low 4 bits */ |
| #define MS_PHY_STATE_ENABLED 0 |
| #define MS_PHY_STATE_REPORTED 1 |
| #define MS_PHY_STATE_HIDDEN 2 |
| u8 phy_id; |
| u16 _r; |
| u8 phy_control_0; /* mode 5 reg 0x160 */ |
| u8 phy_control_1; /* mode 5 reg 0x161 */ |
| u8 phy_control_2; /* mode 5 reg 0x162 */ |
| u8 phy_control_3; /* mode 5 reg 0x163 */ |
| } __attribute__ ((packed)); |
| |
| struct asd_manuf_phy_param { |
| char sig[2]; /* 'P', 'M' */ |
| u16 next; |
| u8 maj; /* 0 */ |
| u8 min; /* 2 */ |
| u8 num_phy_desc; /* 8 */ |
| u8 phy_desc_size; /* 8 */ |
| u8 _r[3]; |
| u8 usage_model_id; |
| u32 _r2; |
| struct asd_manuf_phy_desc phy_desc[ASD_MAX_PHYS]; |
| } __attribute__ ((packed)); |
| |
| #if 0 |
| static const char *asd_sb_type[] = { |
| "unknown", |
| "SGPIO", |
| [2 ... 0x7F] = "unknown", |
| [0x80] = "ADPT_I2C", |
| [0x81 ... 0xFF] = "VENDOR_UNIQUExx" |
| }; |
| #endif |
| |
| struct asd_ms_sb_desc { |
| u8 type; |
| u8 node_desc_index; |
| u8 conn_desc_index; |
| u8 _recvd[0]; |
| } __attribute__ ((packed)); |
| |
| #if 0 |
| static const char *asd_conn_type[] = { |
| [0 ... 7] = "unknown", |
| "SFF8470", |
| "SFF8482", |
| "SFF8484", |
| [0x80] = "PCIX_DAUGHTER0", |
| [0x81] = "SAS_DAUGHTER0", |
| [0x82 ... 0xFF] = "VENDOR_UNIQUExx" |
| }; |
| |
| static const char *asd_conn_location[] = { |
| "unknown", |
| "internal", |
| "external", |
| "board_to_board", |
| }; |
| #endif |
| |
| struct asd_ms_conn_desc { |
| u8 type; |
| u8 location; |
| u8 num_sideband_desc; |
| u8 size_sideband_desc; |
| u32 _resvd; |
| u8 name[16]; |
| struct asd_ms_sb_desc sb_desc[0]; |
| } __attribute__ ((packed)); |
| |
| struct asd_nd_phy_desc { |
| u8 vp_attch_type; |
| u8 attch_specific[0]; |
| } __attribute__ ((packed)); |
| |
| #if 0 |
| static const char *asd_node_type[] = { |
| "IOP", |
| "IO_CONTROLLER", |
| "EXPANDER", |
| "PORT_MULTIPLIER", |
| "PORT_MULTIPLEXER", |
| "MULTI_DROP_I2C_BUS", |
| }; |
| #endif |
| |
| struct asd_ms_node_desc { |
| u8 type; |
| u8 num_phy_desc; |
| u8 size_phy_desc; |
| u8 _resvd; |
| u8 name[16]; |
| struct asd_nd_phy_desc phy_desc[0]; |
| } __attribute__ ((packed)); |
| |
| struct asd_ms_conn_map { |
| char sig[2]; /* 'M', 'C' */ |
| __le16 next; |
| u8 maj; /* 0 */ |
| u8 min; /* 0 */ |
| __le16 cm_size; /* size of this struct */ |
| u8 num_conn; |
| u8 conn_size; |
| u8 num_nodes; |
| u8 usage_model_id; |
| u32 _resvd; |
| struct asd_ms_conn_desc conn_desc[0]; |
| struct asd_ms_node_desc node_desc[0]; |
| } __attribute__ ((packed)); |
| |
| struct asd_ctrla_phy_entry { |
| u8 sas_addr[SAS_ADDR_SIZE]; |
| u8 sas_link_rates; /* max in hi bits, min in low bits */ |
| u8 flags; |
| u8 sata_link_rates; |
| u8 _r[5]; |
| } __attribute__ ((packed)); |
| |
| struct asd_ctrla_phy_settings { |
| u8 id0; /* P'h'y */ |
| u8 _r; |
| u16 next; |
| u8 num_phys; /* number of PHYs in the PCI function */ |
| u8 _r2[3]; |
| struct asd_ctrla_phy_entry phy_ent[ASD_MAX_PHYS]; |
| } __attribute__ ((packed)); |
| |
| struct asd_ll_el { |
| u8 id0; |
| u8 id1; |
| __le16 next; |
| u8 something_here[0]; |
| } __attribute__ ((packed)); |
| |
| static int asd_poll_flash(struct asd_ha_struct *asd_ha) |
| { |
| int c; |
| u8 d; |
| |
| for (c = 5000; c > 0; c--) { |
| d = asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar); |
| d ^= asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar); |
| if (!d) |
| return 0; |
| udelay(5); |
| } |
| return -ENOENT; |
| } |
| |
| static int asd_reset_flash(struct asd_ha_struct *asd_ha) |
| { |
| int err; |
| |
| err = asd_poll_flash(asd_ha); |
| if (err) |
| return err; |
| asd_write_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar, FLASH_RESET); |
| err = asd_poll_flash(asd_ha); |
| |
| return err; |
| } |
| |
| static int asd_read_flash_seg(struct asd_ha_struct *asd_ha, |
| void *buffer, u32 offs, int size) |
| { |
| asd_read_reg_string(asd_ha, buffer, asd_ha->hw_prof.flash.bar+offs, |
| size); |
| return 0; |
| } |
| |
| /** |
| * asd_find_flash_dir - finds and reads the flash directory |
| * @asd_ha: pointer to the host adapter structure |
| * @flash_dir: pointer to flash directory structure |
| * |
| * If found, the flash directory segment will be copied to |
| * @flash_dir. Return 1 if found, 0 if not. |
| */ |
| static int asd_find_flash_dir(struct asd_ha_struct *asd_ha, |
| struct asd_flash_dir *flash_dir) |
| { |
| u32 v; |
| for (v = 0; v < ASD_FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) { |
| asd_read_flash_seg(asd_ha, flash_dir, v, |
| sizeof(FLASH_DIR_COOKIE)-1); |
| if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE, |
| sizeof(FLASH_DIR_COOKIE)-1) == 0) { |
| asd_ha->hw_prof.flash.dir_offs = v; |
| asd_read_flash_seg(asd_ha, flash_dir, v, |
| sizeof(*flash_dir)); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static int asd_flash_getid(struct asd_ha_struct *asd_ha) |
| { |
| int err = 0; |
| u32 reg; |
| |
| reg = asd_read_reg_dword(asd_ha, EXSICNFGR); |
| |
| if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR, |
| &asd_ha->hw_prof.flash.bar)) { |
| asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n", |
| pci_name(asd_ha->pcidev)); |
| return -ENOENT; |
| } |
| asd_ha->hw_prof.flash.present = 1; |
| asd_ha->hw_prof.flash.wide = reg & FLASHW ? 1 : 0; |
| err = asd_reset_flash(asd_ha); |
| if (err) { |
| ASD_DPRINTK("couldn't reset flash(%d)\n", err); |
| return err; |
| } |
| return 0; |
| } |
| |
| static u16 asd_calc_flash_chksum(u16 *p, int size) |
| { |
| u16 chksum = 0; |
| |
| while (size-- > 0) |
| chksum += *p++; |
| |
| return chksum; |
| } |
| |
| |
| static int asd_find_flash_de(struct asd_flash_dir *flash_dir, u32 entry_type, |
| u32 *offs, u32 *size) |
| { |
| int i; |
| struct asd_flash_de *de; |
| |
| for (i = 0; i < FLASH_MAX_DIR_ENTRIES; i++) { |
| u32 type = le32_to_cpu(flash_dir->dir_entry[i].type); |
| |
| type &= FLASH_DE_TYPE_MASK; |
| if (type == entry_type) |
| break; |
| } |
| if (i >= FLASH_MAX_DIR_ENTRIES) |
| return -ENOENT; |
| de = &flash_dir->dir_entry[i]; |
| *offs = le32_to_cpu(de->offs); |
| *size = le32_to_cpu(de->pad_size); |
| return 0; |
| } |
| |
| static int asd_validate_ms(struct asd_manuf_sec *ms) |
| { |
| if (ms->sig[0] != 'S' || ms->sig[1] != 'M') { |
| ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n", |
| ms->sig[0], ms->sig[1]); |
| return -ENOENT; |
| } |
| if (ms->maj != 0) { |
| asd_printk("unsupported manuf. sector. major version:%x\n", |
| ms->maj); |
| return -ENOENT; |
| } |
| ms->offs_next = le16_to_cpu((__force __le16) ms->offs_next); |
| ms->chksum = le16_to_cpu((__force __le16) ms->chksum); |
| ms->size = le16_to_cpu((__force __le16) ms->size); |
| |
| if (asd_calc_flash_chksum((u16 *)ms, ms->size/2)) { |
| asd_printk("failed manuf sector checksum\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int asd_ms_get_sas_addr(struct asd_ha_struct *asd_ha, |
| struct asd_manuf_sec *ms) |
| { |
| memcpy(asd_ha->hw_prof.sas_addr, ms->sas_addr, SAS_ADDR_SIZE); |
| return 0; |
| } |
| |
| static int asd_ms_get_pcba_sn(struct asd_ha_struct *asd_ha, |
| struct asd_manuf_sec *ms) |
| { |
| memcpy(asd_ha->hw_prof.pcba_sn, ms->pcba_sn, ASD_PCBA_SN_SIZE); |
| asd_ha->hw_prof.pcba_sn[ASD_PCBA_SN_SIZE] = '\0'; |
| return 0; |
| } |
| |
| /** |
| * asd_find_ll_by_id - find a linked list entry by its id |
| * @start: void pointer to the first element in the linked list |
| * @id0: the first byte of the id (offs 0) |
| * @id1: the second byte of the id (offs 1) |
| * |
| * @start has to be the _base_ element start, since the |
| * linked list entries's offset is from this pointer. |
| * Some linked list entries use only the first id, in which case |
| * you can pass 0xFF for the second. |
| */ |
| static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1) |
| { |
| struct asd_ll_el *el = start; |
| |
| do { |
| switch (id1) { |
| default: |
| if (el->id1 == id1) |
| case 0xFF: |
| if (el->id0 == id0) |
| return el; |
| } |
| el = start + le16_to_cpu(el->next); |
| } while (el != start); |
| |
| return NULL; |
| } |
| |
| /** |
| * asd_ms_get_phy_params - get phy parameters from the manufacturing sector |
| * @asd_ha: pointer to the host adapter structure |
| * @manuf_sec: pointer to the manufacturing sector |
| * |
| * The manufacturing sector contans also the linked list of sub-segments, |
| * since when it was read, its size was taken from the flash directory, |
| * not from the structure size. |
| * |
| * HIDDEN phys do not count in the total count. REPORTED phys cannot |
| * be enabled but are reported and counted towards the total. |
| * ENABLED phys are enabled by default and count towards the total. |
| * The absolute total phy number is ASD_MAX_PHYS. hw_prof->num_phys |
| * merely specifies the number of phys the host adapter decided to |
| * report. E.g., it is possible for phys 0, 1 and 2 to be HIDDEN, |
| * phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENABLED. |
| * In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2 |
| * are actually enabled (enabled by default, max number of phys |
| * enableable in this case). |
| */ |
| static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha, |
| struct asd_manuf_sec *manuf_sec) |
| { |
| int i; |
| int en_phys = 0; |
| int rep_phys = 0; |
| struct asd_manuf_phy_param *phy_param; |
| struct asd_manuf_phy_param dflt_phy_param; |
| |
| phy_param = asd_find_ll_by_id(manuf_sec, 'P', 'M'); |
| if (!phy_param) { |
| ASD_DPRINTK("ms: no phy parameters found\n"); |
| ASD_DPRINTK("ms: Creating default phy parameters\n"); |
| dflt_phy_param.sig[0] = 'P'; |
| dflt_phy_param.sig[1] = 'M'; |
| dflt_phy_param.maj = 0; |
| dflt_phy_param.min = 2; |
| dflt_phy_param.num_phy_desc = 8; |
| dflt_phy_param.phy_desc_size = sizeof(struct asd_manuf_phy_desc); |
| for (i =0; i < ASD_MAX_PHYS; i++) { |
| dflt_phy_param.phy_desc[i].state = 0; |
| dflt_phy_param.phy_desc[i].phy_id = i; |
| dflt_phy_param.phy_desc[i].phy_control_0 = 0xf6; |
| dflt_phy_param.phy_desc[i].phy_control_1 = 0x10; |
| dflt_phy_param.phy_desc[i].phy_control_2 = 0x43; |
| dflt_phy_param.phy_desc[i].phy_control_3 = 0xeb; |
| } |
| |
| phy_param = &dflt_phy_param; |
| |
| } |
| |
| if (phy_param->maj != 0) { |
| asd_printk("unsupported manuf. phy param major version:0x%x\n", |
| phy_param->maj); |
| return -ENOENT; |
| } |
| |
| ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param->num_phy_desc); |
| asd_ha->hw_prof.enabled_phys = 0; |
| for (i = 0; i < phy_param->num_phy_desc; i++) { |
| struct asd_manuf_phy_desc *pd = &phy_param->phy_desc[i]; |
| switch (pd->state & 0xF) { |
| case MS_PHY_STATE_HIDDEN: |
| ASD_DPRINTK("ms: phy%d: HIDDEN\n", i); |
| continue; |
| case MS_PHY_STATE_REPORTED: |
| ASD_DPRINTK("ms: phy%d: REPORTED\n", i); |
| asd_ha->hw_prof.enabled_phys &= ~(1 << i); |
| rep_phys++; |
| continue; |
| case MS_PHY_STATE_ENABLED: |
| ASD_DPRINTK("ms: phy%d: ENABLED\n", i); |
| asd_ha->hw_prof.enabled_phys |= (1 << i); |
| en_phys++; |
| break; |
| } |
| asd_ha->hw_prof.phy_desc[i].phy_control_0 = pd->phy_control_0; |
| asd_ha->hw_prof.phy_desc[i].phy_control_1 = pd->phy_control_1; |
| asd_ha->hw_prof.phy_desc[i].phy_control_2 = pd->phy_control_2; |
| asd_ha->hw_prof.phy_desc[i].phy_control_3 = pd->phy_control_3; |
| } |
| asd_ha->hw_prof.max_phys = rep_phys + en_phys; |
| asd_ha->hw_prof.num_phys = en_phys; |
| ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n", |
| asd_ha->hw_prof.max_phys, asd_ha->hw_prof.num_phys); |
| ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha->hw_prof.enabled_phys); |
| return 0; |
| } |
| |
| static int asd_ms_get_connector_map(struct asd_ha_struct *asd_ha, |
| struct asd_manuf_sec *manuf_sec) |
| { |
| struct asd_ms_conn_map *cm; |
| |
| cm = asd_find_ll_by_id(manuf_sec, 'M', 'C'); |
| if (!cm) { |
| ASD_DPRINTK("ms: no connector map found\n"); |
| return 0; |
| } |
| |
| if (cm->maj != 0) { |
| ASD_DPRINTK("ms: unsupported: connector map major version 0x%x" |
| "\n", cm->maj); |
| return -ENOENT; |
| } |
| |
| /* XXX */ |
| |
| return 0; |
| } |
| |
| |
| /** |
| * asd_process_ms - find and extract information from the manufacturing sector |
| * @asd_ha: pointer to the host adapter structure |
| * @flash_dir: pointer to the flash directory |
| */ |
| static int asd_process_ms(struct asd_ha_struct *asd_ha, |
| struct asd_flash_dir *flash_dir) |
| { |
| int err; |
| struct asd_manuf_sec *manuf_sec; |
| u32 offs, size; |
| |
| err = asd_find_flash_de(flash_dir, FLASH_DE_MS, &offs, &size); |
| if (err) { |
| ASD_DPRINTK("Couldn't find the manuf. sector\n"); |
| goto out; |
| } |
| |
| if (size == 0) |
| goto out; |
| |
| err = -ENOMEM; |
| manuf_sec = kmalloc(size, GFP_KERNEL); |
| if (!manuf_sec) { |
| ASD_DPRINTK("no mem for manuf sector\n"); |
| goto out; |
| } |
| |
| err = asd_read_flash_seg(asd_ha, (void *)manuf_sec, offs, size); |
| if (err) { |
| ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n", |
| offs, size); |
| goto out2; |
| } |
| |
| err = asd_validate_ms(manuf_sec); |
| if (err) { |
| ASD_DPRINTK("couldn't validate manuf sector\n"); |
| goto out2; |
| } |
| |
| err = asd_ms_get_sas_addr(asd_ha, manuf_sec); |
| if (err) { |
| ASD_DPRINTK("couldn't read the SAS_ADDR\n"); |
| goto out2; |
| } |
| ASD_DPRINTK("manuf sect SAS_ADDR %llx\n", |
| SAS_ADDR(asd_ha->hw_prof.sas_addr)); |
| |
| err = asd_ms_get_pcba_sn(asd_ha, manuf_sec); |
| if (err) { |
| ASD_DPRINTK("couldn't read the PCBA SN\n"); |
| goto out2; |
| } |
| ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha->hw_prof.pcba_sn); |
| |
| err = asd_ms_get_phy_params(asd_ha, manuf_sec); |
| if (err) { |
| ASD_DPRINTK("ms: couldn't get phy parameters\n"); |
| goto out2; |
| } |
| |
| err = asd_ms_get_connector_map(asd_ha, manuf_sec); |
| if (err) { |
| ASD_DPRINTK("ms: couldn't get connector map\n"); |
| goto out2; |
| } |
| |
| out2: |
| kfree(manuf_sec); |
| out: |
| return err; |
| } |
| |
| static int asd_process_ctrla_phy_settings(struct asd_ha_struct *asd_ha, |
| struct asd_ctrla_phy_settings *ps) |
| { |
| int i; |
| for (i = 0; i < ps->num_phys; i++) { |
| struct asd_ctrla_phy_entry *pe = &ps->phy_ent[i]; |
| |
| if (!PHY_ENABLED(asd_ha, i)) |
| continue; |
| if (*(u64 *)pe->sas_addr == 0) { |
| asd_ha->hw_prof.enabled_phys &= ~(1 << i); |
| continue; |
| } |
| /* This is the SAS address which should be sent in IDENTIFY. */ |
| memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, pe->sas_addr, |
| SAS_ADDR_SIZE); |
| asd_ha->hw_prof.phy_desc[i].max_sas_lrate = |
| (pe->sas_link_rates & 0xF0) >> 4; |
| asd_ha->hw_prof.phy_desc[i].min_sas_lrate = |
| (pe->sas_link_rates & 0x0F); |
| asd_ha->hw_prof.phy_desc[i].max_sata_lrate = |
| (pe->sata_link_rates & 0xF0) >> 4; |
| asd_ha->hw_prof.phy_desc[i].min_sata_lrate = |
| (pe->sata_link_rates & 0x0F); |
| asd_ha->hw_prof.phy_desc[i].flags = pe->flags; |
| ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x," |
| " sata rate:0x%x-0x%x, flags:0x%x\n", |
| i, |
| SAS_ADDR(asd_ha->hw_prof.phy_desc[i].sas_addr), |
| asd_ha->hw_prof.phy_desc[i].max_sas_lrate, |
| asd_ha->hw_prof.phy_desc[i].min_sas_lrate, |
| asd_ha->hw_prof.phy_desc[i].max_sata_lrate, |
| asd_ha->hw_prof.phy_desc[i].min_sata_lrate, |
| asd_ha->hw_prof.phy_desc[i].flags); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * asd_process_ctrl_a_user - process CTRL-A user settings |
| * @asd_ha: pointer to the host adapter structure |
| * @flash_dir: pointer to the flash directory |
| */ |
| static int asd_process_ctrl_a_user(struct asd_ha_struct *asd_ha, |
| struct asd_flash_dir *flash_dir) |
| { |
| int err, i; |
| u32 offs, size; |
| struct asd_ll_el *el = NULL; |
| struct asd_ctrla_phy_settings *ps; |
| struct asd_ctrla_phy_settings dflt_ps; |
| |
| err = asd_find_flash_de(flash_dir, FLASH_DE_CTRL_A_USER, &offs, &size); |
| if (err) { |
| ASD_DPRINTK("couldn't find CTRL-A user settings section\n"); |
| ASD_DPRINTK("Creating default CTRL-A user settings section\n"); |
| |
| dflt_ps.id0 = 'h'; |
| dflt_ps.num_phys = 8; |
| for (i =0; i < ASD_MAX_PHYS; i++) { |
| memcpy(dflt_ps.phy_ent[i].sas_addr, |
| asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE); |
| dflt_ps.phy_ent[i].sas_link_rates = 0x98; |
| dflt_ps.phy_ent[i].flags = 0x0; |
| dflt_ps.phy_ent[i].sata_link_rates = 0x0; |
| } |
| |
| size = sizeof(struct asd_ctrla_phy_settings); |
| ps = &dflt_ps; |
| goto out_process; |
| } |
| |
| if (size == 0) |
| goto out; |
| |
| err = -ENOMEM; |
| el = kmalloc(size, GFP_KERNEL); |
| if (!el) { |
| ASD_DPRINTK("no mem for ctrla user settings section\n"); |
| goto out; |
| } |
| |
| err = asd_read_flash_seg(asd_ha, (void *)el, offs, size); |
| if (err) { |
| ASD_DPRINTK("couldn't read ctrla phy settings section\n"); |
| goto out2; |
| } |
| |
| err = -ENOENT; |
| ps = asd_find_ll_by_id(el, 'h', 0xFF); |
| if (!ps) { |
| ASD_DPRINTK("couldn't find ctrla phy settings struct\n"); |
| goto out2; |
| } |
| out_process: |
| err = asd_process_ctrla_phy_settings(asd_ha, ps); |
| if (err) { |
| ASD_DPRINTK("couldn't process ctrla phy settings\n"); |
| goto out2; |
| } |
| out2: |
| kfree(el); |
| out: |
| return err; |
| } |
| |
| /** |
| * asd_read_flash - read flash memory |
| * @asd_ha: pointer to the host adapter structure |
| */ |
| int asd_read_flash(struct asd_ha_struct *asd_ha) |
| { |
| int err; |
| struct asd_flash_dir *flash_dir; |
| |
| err = asd_flash_getid(asd_ha); |
| if (err) |
| return err; |
| |
| flash_dir = kmalloc(sizeof(*flash_dir), GFP_KERNEL); |
| if (!flash_dir) |
| return -ENOMEM; |
| |
| err = -ENOENT; |
| if (!asd_find_flash_dir(asd_ha, flash_dir)) { |
| ASD_DPRINTK("couldn't find flash directory\n"); |
| goto out; |
| } |
| |
| if (le32_to_cpu(flash_dir->rev) != 2) { |
| asd_printk("unsupported flash dir version:0x%x\n", |
| le32_to_cpu(flash_dir->rev)); |
| goto out; |
| } |
| |
| err = asd_process_ms(asd_ha, flash_dir); |
| if (err) { |
| ASD_DPRINTK("couldn't process manuf sector settings\n"); |
| goto out; |
| } |
| |
| err = asd_process_ctrl_a_user(asd_ha, flash_dir); |
| if (err) { |
| ASD_DPRINTK("couldn't process CTRL-A user settings\n"); |
| goto out; |
| } |
| |
| out: |
| kfree(flash_dir); |
| return err; |
| } |
| |
| /** |
| * asd_verify_flash_seg - verify data with flash memory |
| * @asd_ha: pointer to the host adapter structure |
| * @src: pointer to the source data to be verified |
| * @dest_offset: offset from flash memory |
| * @bytes_to_verify: total bytes to verify |
| */ |
| int asd_verify_flash_seg(struct asd_ha_struct *asd_ha, |
| const void *src, u32 dest_offset, u32 bytes_to_verify) |
| { |
| const u8 *src_buf; |
| u8 flash_char; |
| int err; |
| u32 nv_offset, reg, i; |
| |
| reg = asd_ha->hw_prof.flash.bar; |
| src_buf = NULL; |
| |
| err = FLASH_OK; |
| nv_offset = dest_offset; |
| src_buf = (const u8 *)src; |
| for (i = 0; i < bytes_to_verify; i++) { |
| flash_char = asd_read_reg_byte(asd_ha, reg + nv_offset + i); |
| if (flash_char != src_buf[i]) { |
| err = FAIL_VERIFY; |
| break; |
| } |
| } |
| return err; |
| } |
| |
| /** |
| * asd_write_flash_seg - write data into flash memory |
| * @asd_ha: pointer to the host adapter structure |
| * @src: pointer to the source data to be written |
| * @dest_offset: offset from flash memory |
| * @bytes_to_write: total bytes to write |
| */ |
| int asd_write_flash_seg(struct asd_ha_struct *asd_ha, |
| const void *src, u32 dest_offset, u32 bytes_to_write) |
| { |
| const u8 *src_buf; |
| u32 nv_offset, reg, i; |
| int err; |
| |
| reg = asd_ha->hw_prof.flash.bar; |
| src_buf = NULL; |
| |
| err = asd_check_flash_type(asd_ha); |
| if (err) { |
| ASD_DPRINTK("couldn't find the type of flash. err=%d\n", err); |
| return err; |
| } |
| |
| nv_offset = dest_offset; |
| err = asd_erase_nv_sector(asd_ha, nv_offset, bytes_to_write); |
| if (err) { |
| ASD_DPRINTK("Erase failed at offset:0x%x\n", |
| nv_offset); |
| return err; |
| } |
| |
| err = asd_reset_flash(asd_ha); |
| if (err) { |
| ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| return err; |
| } |
| |
| src_buf = (const u8 *)src; |
| for (i = 0; i < bytes_to_write; i++) { |
| /* Setup program command sequence */ |
| switch (asd_ha->hw_prof.flash.method) { |
| case FLASH_METHOD_A: |
| { |
| asd_write_reg_byte(asd_ha, |
| (reg + 0xAAA), 0xAA); |
| asd_write_reg_byte(asd_ha, |
| (reg + 0x555), 0x55); |
| asd_write_reg_byte(asd_ha, |
| (reg + 0xAAA), 0xA0); |
| asd_write_reg_byte(asd_ha, |
| (reg + nv_offset + i), |
| (*(src_buf + i))); |
| break; |
| } |
| case FLASH_METHOD_B: |
| { |
| asd_write_reg_byte(asd_ha, |
| (reg + 0x555), 0xAA); |
| asd_write_reg_byte(asd_ha, |
| (reg + 0x2AA), 0x55); |
| asd_write_reg_byte(asd_ha, |
| (reg + 0x555), 0xA0); |
| asd_write_reg_byte(asd_ha, |
| (reg + nv_offset + i), |
| (*(src_buf + i))); |
| break; |
| } |
| default: |
| break; |
| } |
| if (asd_chk_write_status(asd_ha, |
| (nv_offset + i), 0) != 0) { |
| ASD_DPRINTK("aicx: Write failed at offset:0x%x\n", |
| reg + nv_offset + i); |
| return FAIL_WRITE_FLASH; |
| } |
| } |
| |
| err = asd_reset_flash(asd_ha); |
| if (err) { |
| ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| return err; |
| } |
| return 0; |
| } |
| |
| int asd_chk_write_status(struct asd_ha_struct *asd_ha, |
| u32 sector_addr, u8 erase_flag) |
| { |
| u32 reg; |
| u32 loop_cnt; |
| u8 nv_data1, nv_data2; |
| u8 toggle_bit1; |
| |
| /* |
| * Read from DQ2 requires sector address |
| * while it's dont care for DQ6 |
| */ |
| reg = asd_ha->hw_prof.flash.bar; |
| |
| for (loop_cnt = 0; loop_cnt < 50000; loop_cnt++) { |
| nv_data1 = asd_read_reg_byte(asd_ha, reg); |
| nv_data2 = asd_read_reg_byte(asd_ha, reg); |
| |
| toggle_bit1 = ((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6) |
| ^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6)); |
| |
| if (toggle_bit1 == 0) { |
| return 0; |
| } else { |
| if (nv_data2 & FLASH_STATUS_BIT_MASK_DQ5) { |
| nv_data1 = asd_read_reg_byte(asd_ha, |
| reg); |
| nv_data2 = asd_read_reg_byte(asd_ha, |
| reg); |
| toggle_bit1 = |
| ((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6) |
| ^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6)); |
| |
| if (toggle_bit1 == 0) |
| return 0; |
| } |
| } |
| |
| /* |
| * ERASE is a sector-by-sector operation and requires |
| * more time to finish while WRITE is byte-byte-byte |
| * operation and takes lesser time to finish. |
| * |
| * For some strange reason a reduced ERASE delay gives different |
| * behaviour across different spirit boards. Hence we set |
| * a optimum balance of 50mus for ERASE which works well |
| * across all boards. |
| */ |
| if (erase_flag) { |
| udelay(FLASH_STATUS_ERASE_DELAY_COUNT); |
| } else { |
| udelay(FLASH_STATUS_WRITE_DELAY_COUNT); |
| } |
| } |
| return -1; |
| } |
| |
| /** |
| * asd_hwi_erase_nv_sector - Erase the flash memory sectors. |
| * @asd_ha: pointer to the host adapter structure |
| * @flash_addr: pointer to offset from flash memory |
| * @size: total bytes to erase. |
| */ |
| int asd_erase_nv_sector(struct asd_ha_struct *asd_ha, u32 flash_addr, u32 size) |
| { |
| u32 reg; |
| u32 sector_addr; |
| |
| reg = asd_ha->hw_prof.flash.bar; |
| |
| /* sector staring address */ |
| sector_addr = flash_addr & FLASH_SECTOR_SIZE_MASK; |
| |
| /* |
| * Erasing an flash sector needs to be done in six consecutive |
| * write cyles. |
| */ |
| while (sector_addr < flash_addr+size) { |
| switch (asd_ha->hw_prof.flash.method) { |
| case FLASH_METHOD_A: |
| asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA); |
| asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55); |
| asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0x80); |
| asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA); |
| asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55); |
| asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30); |
| break; |
| case FLASH_METHOD_B: |
| asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); |
| asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); |
| asd_write_reg_byte(asd_ha, (reg + 0x555), 0x80); |
| asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); |
| asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); |
| asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30); |
| break; |
| default: |
| break; |
| } |
| |
| if (asd_chk_write_status(asd_ha, sector_addr, 1) != 0) |
| return FAIL_ERASE_FLASH; |
| |
| sector_addr += FLASH_SECTOR_SIZE; |
| } |
| |
| return 0; |
| } |
| |
| int asd_check_flash_type(struct asd_ha_struct *asd_ha) |
| { |
| u8 manuf_id; |
| u8 dev_id; |
| u8 sec_prot; |
| u32 inc; |
| u32 reg; |
| int err; |
| |
| /* get Flash memory base address */ |
| reg = asd_ha->hw_prof.flash.bar; |
| |
| /* Determine flash info */ |
| err = asd_reset_flash(asd_ha); |
| if (err) { |
| ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| return err; |
| } |
| |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_UNKNOWN; |
| asd_ha->hw_prof.flash.manuf = FLASH_MANUF_ID_UNKNOWN; |
| asd_ha->hw_prof.flash.dev_id = FLASH_DEV_ID_UNKNOWN; |
| |
| /* Get flash info. This would most likely be AMD Am29LV family flash. |
| * First try the sequence for word mode. It is the same as for |
| * 008B (byte mode only), 160B (word mode) and 800D (word mode). |
| */ |
| inc = asd_ha->hw_prof.flash.wide ? 2 : 1; |
| asd_write_reg_byte(asd_ha, reg + 0xAAA, 0xAA); |
| asd_write_reg_byte(asd_ha, reg + 0x555, 0x55); |
| asd_write_reg_byte(asd_ha, reg + 0xAAA, 0x90); |
| manuf_id = asd_read_reg_byte(asd_ha, reg); |
| dev_id = asd_read_reg_byte(asd_ha, reg + inc); |
| sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc); |
| /* Get out of autoselect mode. */ |
| err = asd_reset_flash(asd_ha); |
| if (err) { |
| ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| return err; |
| } |
| ASD_DPRINTK("Flash MethodA manuf_id(0x%x) dev_id(0x%x) " |
| "sec_prot(0x%x)\n", manuf_id, dev_id, sec_prot); |
| err = asd_reset_flash(asd_ha); |
| if (err != 0) |
| return err; |
| |
| switch (manuf_id) { |
| case FLASH_MANUF_ID_AMD: |
| switch (sec_prot) { |
| case FLASH_DEV_ID_AM29LV800DT: |
| case FLASH_DEV_ID_AM29LV640MT: |
| case FLASH_DEV_ID_AM29F800B: |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_A; |
| break; |
| default: |
| break; |
| } |
| break; |
| case FLASH_MANUF_ID_ST: |
| switch (sec_prot) { |
| case FLASH_DEV_ID_STM29W800DT: |
| case FLASH_DEV_ID_STM29LV640: |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_A; |
| break; |
| default: |
| break; |
| } |
| break; |
| case FLASH_MANUF_ID_FUJITSU: |
| switch (sec_prot) { |
| case FLASH_DEV_ID_MBM29LV800TE: |
| case FLASH_DEV_ID_MBM29DL800TA: |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_A; |
| break; |
| } |
| break; |
| case FLASH_MANUF_ID_MACRONIX: |
| switch (sec_prot) { |
| case FLASH_DEV_ID_MX29LV800BT: |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_A; |
| break; |
| } |
| break; |
| } |
| |
| if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN) { |
| err = asd_reset_flash(asd_ha); |
| if (err) { |
| ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| return err; |
| } |
| |
| /* Issue Unlock sequence for AM29LV008BT */ |
| asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); |
| asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); |
| asd_write_reg_byte(asd_ha, (reg + 0x555), 0x90); |
| manuf_id = asd_read_reg_byte(asd_ha, reg); |
| dev_id = asd_read_reg_byte(asd_ha, reg + inc); |
| sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc); |
| |
| ASD_DPRINTK("Flash MethodB manuf_id(0x%x) dev_id(0x%x) sec_prot" |
| "(0x%x)\n", manuf_id, dev_id, sec_prot); |
| |
| err = asd_reset_flash(asd_ha); |
| if (err != 0) { |
| ASD_DPRINTK("couldn't reset flash. err=%d\n", err); |
| return err; |
| } |
| |
| switch (manuf_id) { |
| case FLASH_MANUF_ID_AMD: |
| switch (dev_id) { |
| case FLASH_DEV_ID_AM29LV008BT: |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| break; |
| default: |
| break; |
| } |
| break; |
| case FLASH_MANUF_ID_ST: |
| switch (dev_id) { |
| case FLASH_DEV_ID_STM29008: |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| break; |
| default: |
| break; |
| } |
| break; |
| case FLASH_MANUF_ID_FUJITSU: |
| switch (dev_id) { |
| case FLASH_DEV_ID_MBM29LV008TA: |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| break; |
| } |
| break; |
| case FLASH_MANUF_ID_INTEL: |
| switch (dev_id) { |
| case FLASH_DEV_ID_I28LV00TAT: |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| break; |
| } |
| break; |
| case FLASH_MANUF_ID_MACRONIX: |
| switch (dev_id) { |
| case FLASH_DEV_ID_I28LV00TAT: |
| asd_ha->hw_prof.flash.method = FLASH_METHOD_B; |
| break; |
| } |
| break; |
| default: |
| return FAIL_FIND_FLASH_ID; |
| } |
| } |
| |
| if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN) |
| return FAIL_FIND_FLASH_ID; |
| |
| asd_ha->hw_prof.flash.manuf = manuf_id; |
| asd_ha->hw_prof.flash.dev_id = dev_id; |
| asd_ha->hw_prof.flash.sec_prot = sec_prot; |
| return 0; |
| } |