| /* |
| * Copyright 2012-15 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| #include "dm_services.h" |
| |
| #include "atom.h" |
| |
| #include "dc_bios_types.h" |
| #include "include/gpio_service_interface.h" |
| #include "include/grph_object_ctrl_defs.h" |
| #include "include/bios_parser_interface.h" |
| #include "include/i2caux_interface.h" |
| #include "include/logger_interface.h" |
| |
| #include "command_table.h" |
| #include "bios_parser_helper.h" |
| #include "command_table_helper.h" |
| #include "bios_parser.h" |
| #include "bios_parser_types_internal.h" |
| #include "bios_parser_interface.h" |
| |
| #include "bios_parser_common.h" |
| /* TODO remove - only needed for default i2c speed */ |
| #include "dc.h" |
| |
| #define THREE_PERCENT_OF_10000 300 |
| |
| #define LAST_RECORD_TYPE 0xff |
| |
| /* GUID to validate external display connection info table (aka OPM module) */ |
| static const uint8_t ext_display_connection_guid[NUMBER_OF_UCHAR_FOR_GUID] = { |
| 0x91, 0x6E, 0x57, 0x09, |
| 0x3F, 0x6D, 0xD2, 0x11, |
| 0x39, 0x8E, 0x00, 0xA0, |
| 0xC9, 0x69, 0x72, 0x3B}; |
| |
| #define DATA_TABLES(table) (bp->master_data_tbl->ListOfDataTables.table) |
| |
| static void get_atom_data_table_revision( |
| ATOM_COMMON_TABLE_HEADER *atom_data_tbl, |
| struct atom_data_revision *tbl_revision); |
| static uint32_t get_dst_number_from_object(struct bios_parser *bp, |
| ATOM_OBJECT *object); |
| static uint32_t get_src_obj_list(struct bios_parser *bp, ATOM_OBJECT *object, |
| uint16_t **id_list); |
| static uint32_t get_dest_obj_list(struct bios_parser *bp, |
| ATOM_OBJECT *object, uint16_t **id_list); |
| static ATOM_OBJECT *get_bios_object(struct bios_parser *bp, |
| struct graphics_object_id id); |
| static enum bp_result get_gpio_i2c_info(struct bios_parser *bp, |
| ATOM_I2C_RECORD *record, |
| struct graphics_object_i2c_info *info); |
| static ATOM_HPD_INT_RECORD *get_hpd_record(struct bios_parser *bp, |
| ATOM_OBJECT *object); |
| static struct device_id device_type_from_device_id(uint16_t device_id); |
| static uint32_t signal_to_ss_id(enum as_signal_type signal); |
| static uint32_t get_support_mask_for_device_id(struct device_id device_id); |
| static ATOM_ENCODER_CAP_RECORD_V2 *get_encoder_cap_record( |
| struct bios_parser *bp, |
| ATOM_OBJECT *object); |
| |
| #define BIOS_IMAGE_SIZE_OFFSET 2 |
| #define BIOS_IMAGE_SIZE_UNIT 512 |
| |
| /*****************************************************************************/ |
| static bool bios_parser_construct( |
| struct bios_parser *bp, |
| struct bp_init_data *init, |
| enum dce_version dce_version); |
| |
| static uint8_t bios_parser_get_connectors_number( |
| struct dc_bios *dcb); |
| |
| static enum bp_result bios_parser_get_embedded_panel_info( |
| struct dc_bios *dcb, |
| struct embedded_panel_info *info); |
| |
| /*****************************************************************************/ |
| |
| struct dc_bios *bios_parser_create( |
| struct bp_init_data *init, |
| enum dce_version dce_version) |
| { |
| struct bios_parser *bp = NULL; |
| |
| bp = kzalloc(sizeof(struct bios_parser), GFP_KERNEL); |
| if (!bp) |
| return NULL; |
| |
| if (bios_parser_construct(bp, init, dce_version)) |
| return &bp->base; |
| |
| kfree(bp); |
| BREAK_TO_DEBUGGER(); |
| return NULL; |
| } |
| |
| static void destruct(struct bios_parser *bp) |
| { |
| kfree(bp->base.bios_local_image); |
| kfree(bp->base.integrated_info); |
| } |
| |
| static void bios_parser_destroy(struct dc_bios **dcb) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(*dcb); |
| |
| if (!bp) { |
| BREAK_TO_DEBUGGER(); |
| return; |
| } |
| |
| destruct(bp); |
| |
| kfree(bp); |
| *dcb = NULL; |
| } |
| |
| static uint8_t get_number_of_objects(struct bios_parser *bp, uint32_t offset) |
| { |
| ATOM_OBJECT_TABLE *table; |
| |
| uint32_t object_table_offset = bp->object_info_tbl_offset + offset; |
| |
| table = GET_IMAGE(ATOM_OBJECT_TABLE, object_table_offset); |
| |
| if (!table) |
| return 0; |
| else |
| return table->ucNumberOfObjects; |
| } |
| |
| static uint8_t bios_parser_get_connectors_number(struct dc_bios *dcb) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| return get_number_of_objects(bp, |
| le16_to_cpu(bp->object_info_tbl.v1_1->usConnectorObjectTableOffset)); |
| } |
| |
| static struct graphics_object_id bios_parser_get_encoder_id( |
| struct dc_bios *dcb, |
| uint32_t i) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| struct graphics_object_id object_id = dal_graphics_object_id_init( |
| 0, ENUM_ID_UNKNOWN, OBJECT_TYPE_UNKNOWN); |
| |
| uint32_t encoder_table_offset = bp->object_info_tbl_offset |
| + le16_to_cpu(bp->object_info_tbl.v1_1->usEncoderObjectTableOffset); |
| |
| ATOM_OBJECT_TABLE *tbl = |
| GET_IMAGE(ATOM_OBJECT_TABLE, encoder_table_offset); |
| |
| if (tbl && tbl->ucNumberOfObjects > i) { |
| const uint16_t id = le16_to_cpu(tbl->asObjects[i].usObjectID); |
| |
| object_id = object_id_from_bios_object_id(id); |
| } |
| |
| return object_id; |
| } |
| |
| static struct graphics_object_id bios_parser_get_connector_id( |
| struct dc_bios *dcb, |
| uint8_t i) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| struct graphics_object_id object_id = dal_graphics_object_id_init( |
| 0, ENUM_ID_UNKNOWN, OBJECT_TYPE_UNKNOWN); |
| |
| uint32_t connector_table_offset = bp->object_info_tbl_offset |
| + le16_to_cpu(bp->object_info_tbl.v1_1->usConnectorObjectTableOffset); |
| |
| ATOM_OBJECT_TABLE *tbl = |
| GET_IMAGE(ATOM_OBJECT_TABLE, connector_table_offset); |
| |
| if (tbl && tbl->ucNumberOfObjects > i) { |
| const uint16_t id = le16_to_cpu(tbl->asObjects[i].usObjectID); |
| |
| object_id = object_id_from_bios_object_id(id); |
| } |
| |
| return object_id; |
| } |
| |
| static uint32_t bios_parser_get_dst_number(struct dc_bios *dcb, |
| struct graphics_object_id id) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| ATOM_OBJECT *object = get_bios_object(bp, id); |
| |
| return get_dst_number_from_object(bp, object); |
| } |
| |
| static enum bp_result bios_parser_get_src_obj(struct dc_bios *dcb, |
| struct graphics_object_id object_id, uint32_t index, |
| struct graphics_object_id *src_object_id) |
| { |
| uint32_t number; |
| uint16_t *id; |
| ATOM_OBJECT *object; |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!src_object_id) |
| return BP_RESULT_BADINPUT; |
| |
| object = get_bios_object(bp, object_id); |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); /* Invalid object id */ |
| return BP_RESULT_BADINPUT; |
| } |
| |
| number = get_src_obj_list(bp, object, &id); |
| |
| if (number <= index) |
| return BP_RESULT_BADINPUT; |
| |
| *src_object_id = object_id_from_bios_object_id(id[index]); |
| |
| return BP_RESULT_OK; |
| } |
| |
| static enum bp_result bios_parser_get_dst_obj(struct dc_bios *dcb, |
| struct graphics_object_id object_id, uint32_t index, |
| struct graphics_object_id *dest_object_id) |
| { |
| uint32_t number; |
| uint16_t *id; |
| ATOM_OBJECT *object; |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!dest_object_id) |
| return BP_RESULT_BADINPUT; |
| |
| object = get_bios_object(bp, object_id); |
| |
| number = get_dest_obj_list(bp, object, &id); |
| |
| if (number <= index) |
| return BP_RESULT_BADINPUT; |
| |
| *dest_object_id = object_id_from_bios_object_id(id[index]); |
| |
| return BP_RESULT_OK; |
| } |
| |
| static enum bp_result bios_parser_get_i2c_info(struct dc_bios *dcb, |
| struct graphics_object_id id, |
| struct graphics_object_i2c_info *info) |
| { |
| uint32_t offset; |
| ATOM_OBJECT *object; |
| ATOM_COMMON_RECORD_HEADER *header; |
| ATOM_I2C_RECORD *record; |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| object = get_bios_object(bp, id); |
| |
| if (!object) |
| return BP_RESULT_BADINPUT; |
| |
| offset = le16_to_cpu(object->usRecordOffset) |
| + bp->object_info_tbl_offset; |
| |
| for (;;) { |
| header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, offset); |
| |
| if (!header) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| if (LAST_RECORD_TYPE == header->ucRecordType || |
| !header->ucRecordSize) |
| break; |
| |
| if (ATOM_I2C_RECORD_TYPE == header->ucRecordType |
| && sizeof(ATOM_I2C_RECORD) <= header->ucRecordSize) { |
| /* get the I2C info */ |
| record = (ATOM_I2C_RECORD *) header; |
| |
| if (get_gpio_i2c_info(bp, record, info) == BP_RESULT_OK) |
| return BP_RESULT_OK; |
| } |
| |
| offset += header->ucRecordSize; |
| } |
| |
| return BP_RESULT_NORECORD; |
| } |
| |
| static enum bp_result get_voltage_ddc_info_v1(uint8_t *i2c_line, |
| ATOM_COMMON_TABLE_HEADER *header, |
| uint8_t *address) |
| { |
| enum bp_result result = BP_RESULT_NORECORD; |
| ATOM_VOLTAGE_OBJECT_INFO *info = |
| (ATOM_VOLTAGE_OBJECT_INFO *) address; |
| |
| uint8_t *voltage_current_object = (uint8_t *) &info->asVoltageObj[0]; |
| |
| while ((address + le16_to_cpu(header->usStructureSize)) > voltage_current_object) { |
| ATOM_VOLTAGE_OBJECT *object = |
| (ATOM_VOLTAGE_OBJECT *) voltage_current_object; |
| |
| if ((object->ucVoltageType == SET_VOLTAGE_INIT_MODE) && |
| (object->ucVoltageType & |
| VOLTAGE_CONTROLLED_BY_I2C_MASK)) { |
| |
| *i2c_line = object->asControl.ucVoltageControlI2cLine |
| ^ 0x90; |
| result = BP_RESULT_OK; |
| break; |
| } |
| |
| voltage_current_object += object->ucSize; |
| } |
| return result; |
| } |
| |
| static enum bp_result get_voltage_ddc_info_v3(uint8_t *i2c_line, |
| uint32_t index, |
| ATOM_COMMON_TABLE_HEADER *header, |
| uint8_t *address) |
| { |
| enum bp_result result = BP_RESULT_NORECORD; |
| ATOM_VOLTAGE_OBJECT_INFO_V3_1 *info = |
| (ATOM_VOLTAGE_OBJECT_INFO_V3_1 *) address; |
| |
| uint8_t *voltage_current_object = |
| (uint8_t *) (&(info->asVoltageObj[0])); |
| |
| while ((address + le16_to_cpu(header->usStructureSize)) > voltage_current_object) { |
| ATOM_I2C_VOLTAGE_OBJECT_V3 *object = |
| (ATOM_I2C_VOLTAGE_OBJECT_V3 *) voltage_current_object; |
| |
| if (object->sHeader.ucVoltageMode == |
| ATOM_INIT_VOLTAGE_REGULATOR) { |
| if (object->sHeader.ucVoltageType == index) { |
| *i2c_line = object->ucVoltageControlI2cLine |
| ^ 0x90; |
| result = BP_RESULT_OK; |
| break; |
| } |
| } |
| |
| voltage_current_object += le16_to_cpu(object->sHeader.usSize); |
| } |
| return result; |
| } |
| |
| static enum bp_result bios_parser_get_thermal_ddc_info( |
| struct dc_bios *dcb, |
| uint32_t i2c_channel_id, |
| struct graphics_object_i2c_info *info) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| ATOM_I2C_ID_CONFIG_ACCESS *config; |
| ATOM_I2C_RECORD record; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| config = (ATOM_I2C_ID_CONFIG_ACCESS *) &i2c_channel_id; |
| |
| record.sucI2cId.bfHW_Capable = config->sbfAccess.bfHW_Capable; |
| record.sucI2cId.bfI2C_LineMux = config->sbfAccess.bfI2C_LineMux; |
| record.sucI2cId.bfHW_EngineID = config->sbfAccess.bfHW_EngineID; |
| |
| return get_gpio_i2c_info(bp, &record, info); |
| } |
| |
| static enum bp_result bios_parser_get_voltage_ddc_info(struct dc_bios *dcb, |
| uint32_t index, |
| struct graphics_object_i2c_info *info) |
| { |
| uint8_t i2c_line = 0; |
| enum bp_result result = BP_RESULT_NORECORD; |
| uint8_t *voltage_info_address; |
| ATOM_COMMON_TABLE_HEADER *header; |
| struct atom_data_revision revision = {0}; |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!DATA_TABLES(VoltageObjectInfo)) |
| return result; |
| |
| voltage_info_address = bios_get_image(&bp->base, DATA_TABLES(VoltageObjectInfo), sizeof(ATOM_COMMON_TABLE_HEADER)); |
| |
| header = (ATOM_COMMON_TABLE_HEADER *) voltage_info_address; |
| |
| get_atom_data_table_revision(header, &revision); |
| |
| switch (revision.major) { |
| case 1: |
| case 2: |
| result = get_voltage_ddc_info_v1(&i2c_line, header, |
| voltage_info_address); |
| break; |
| case 3: |
| if (revision.minor != 1) |
| break; |
| result = get_voltage_ddc_info_v3(&i2c_line, index, header, |
| voltage_info_address); |
| break; |
| } |
| |
| if (result == BP_RESULT_OK) |
| result = bios_parser_get_thermal_ddc_info(dcb, |
| i2c_line, info); |
| |
| return result; |
| } |
| |
| /* TODO: temporary commented out to suppress 'defined but not used' warning */ |
| #if 0 |
| static enum bp_result bios_parser_get_ddc_info_for_i2c_line( |
| struct bios_parser *bp, |
| uint8_t i2c_line, struct graphics_object_i2c_info *info) |
| { |
| uint32_t offset; |
| ATOM_OBJECT *object; |
| ATOM_OBJECT_TABLE *table; |
| uint32_t i; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| offset = le16_to_cpu(bp->object_info_tbl.v1_1->usConnectorObjectTableOffset); |
| |
| offset += bp->object_info_tbl_offset; |
| |
| table = GET_IMAGE(ATOM_OBJECT_TABLE, offset); |
| |
| if (!table) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| for (i = 0; i < table->ucNumberOfObjects; i++) { |
| object = &table->asObjects[i]; |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); /* Invalid object id */ |
| return BP_RESULT_BADINPUT; |
| } |
| |
| offset = le16_to_cpu(object->usRecordOffset) |
| + bp->object_info_tbl_offset; |
| |
| for (;;) { |
| ATOM_COMMON_RECORD_HEADER *header = |
| GET_IMAGE(ATOM_COMMON_RECORD_HEADER, offset); |
| |
| if (!header) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| offset += header->ucRecordSize; |
| |
| if (LAST_RECORD_TYPE == header->ucRecordType || |
| !header->ucRecordSize) |
| break; |
| |
| if (ATOM_I2C_RECORD_TYPE == header->ucRecordType |
| && sizeof(ATOM_I2C_RECORD) <= |
| header->ucRecordSize) { |
| ATOM_I2C_RECORD *record = |
| (ATOM_I2C_RECORD *) header; |
| |
| if (i2c_line != record->sucI2cId.bfI2C_LineMux) |
| continue; |
| |
| /* get the I2C info */ |
| if (get_gpio_i2c_info(bp, record, info) == |
| BP_RESULT_OK) |
| return BP_RESULT_OK; |
| } |
| } |
| } |
| |
| return BP_RESULT_NORECORD; |
| } |
| #endif |
| |
| static enum bp_result bios_parser_get_hpd_info(struct dc_bios *dcb, |
| struct graphics_object_id id, |
| struct graphics_object_hpd_info *info) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| ATOM_OBJECT *object; |
| ATOM_HPD_INT_RECORD *record = NULL; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| object = get_bios_object(bp, id); |
| |
| if (!object) |
| return BP_RESULT_BADINPUT; |
| |
| record = get_hpd_record(bp, object); |
| |
| if (record != NULL) { |
| info->hpd_int_gpio_uid = record->ucHPDIntGPIOID; |
| info->hpd_active = record->ucPlugged_PinState; |
| return BP_RESULT_OK; |
| } |
| |
| return BP_RESULT_NORECORD; |
| } |
| |
| static enum bp_result bios_parser_get_device_tag_record( |
| struct bios_parser *bp, |
| ATOM_OBJECT *object, |
| ATOM_CONNECTOR_DEVICE_TAG_RECORD **record) |
| { |
| ATOM_COMMON_RECORD_HEADER *header; |
| uint32_t offset; |
| |
| offset = le16_to_cpu(object->usRecordOffset) |
| + bp->object_info_tbl_offset; |
| |
| for (;;) { |
| header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, offset); |
| |
| if (!header) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| offset += header->ucRecordSize; |
| |
| if (LAST_RECORD_TYPE == header->ucRecordType || |
| !header->ucRecordSize) |
| break; |
| |
| if (ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE != |
| header->ucRecordType) |
| continue; |
| |
| if (sizeof(ATOM_CONNECTOR_DEVICE_TAG) > header->ucRecordSize) |
| continue; |
| |
| *record = (ATOM_CONNECTOR_DEVICE_TAG_RECORD *) header; |
| return BP_RESULT_OK; |
| } |
| |
| return BP_RESULT_NORECORD; |
| } |
| |
| static enum bp_result bios_parser_get_device_tag( |
| struct dc_bios *dcb, |
| struct graphics_object_id connector_object_id, |
| uint32_t device_tag_index, |
| struct connector_device_tag_info *info) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| ATOM_OBJECT *object; |
| ATOM_CONNECTOR_DEVICE_TAG_RECORD *record = NULL; |
| ATOM_CONNECTOR_DEVICE_TAG *device_tag; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| /* getBiosObject will return MXM object */ |
| object = get_bios_object(bp, connector_object_id); |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); /* Invalid object id */ |
| return BP_RESULT_BADINPUT; |
| } |
| |
| if (bios_parser_get_device_tag_record(bp, object, &record) |
| != BP_RESULT_OK) |
| return BP_RESULT_NORECORD; |
| |
| if (device_tag_index >= record->ucNumberOfDevice) |
| return BP_RESULT_NORECORD; |
| |
| device_tag = &record->asDeviceTag[device_tag_index]; |
| |
| info->acpi_device = le32_to_cpu(device_tag->ulACPIDeviceEnum); |
| info->dev_id = |
| device_type_from_device_id(le16_to_cpu(device_tag->usDeviceID)); |
| |
| return BP_RESULT_OK; |
| } |
| |
| static enum bp_result get_firmware_info_v1_4( |
| struct bios_parser *bp, |
| struct dc_firmware_info *info); |
| static enum bp_result get_firmware_info_v2_1( |
| struct bios_parser *bp, |
| struct dc_firmware_info *info); |
| static enum bp_result get_firmware_info_v2_2( |
| struct bios_parser *bp, |
| struct dc_firmware_info *info); |
| |
| static enum bp_result bios_parser_get_firmware_info( |
| struct dc_bios *dcb, |
| struct dc_firmware_info *info) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| enum bp_result result = BP_RESULT_BADBIOSTABLE; |
| ATOM_COMMON_TABLE_HEADER *header; |
| struct atom_data_revision revision; |
| |
| if (info && DATA_TABLES(FirmwareInfo)) { |
| header = GET_IMAGE(ATOM_COMMON_TABLE_HEADER, |
| DATA_TABLES(FirmwareInfo)); |
| get_atom_data_table_revision(header, &revision); |
| switch (revision.major) { |
| case 1: |
| switch (revision.minor) { |
| case 4: |
| result = get_firmware_info_v1_4(bp, info); |
| break; |
| default: |
| break; |
| } |
| break; |
| |
| case 2: |
| switch (revision.minor) { |
| case 1: |
| result = get_firmware_info_v2_1(bp, info); |
| break; |
| case 2: |
| result = get_firmware_info_v2_2(bp, info); |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| return result; |
| } |
| |
| static enum bp_result get_firmware_info_v1_4( |
| struct bios_parser *bp, |
| struct dc_firmware_info *info) |
| { |
| ATOM_FIRMWARE_INFO_V1_4 *firmware_info = |
| GET_IMAGE(ATOM_FIRMWARE_INFO_V1_4, |
| DATA_TABLES(FirmwareInfo)); |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| if (!firmware_info) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| memset(info, 0, sizeof(*info)); |
| |
| /* Pixel clock pll information. We need to convert from 10KHz units into |
| * KHz units */ |
| info->pll_info.crystal_frequency = |
| le16_to_cpu(firmware_info->usReferenceClock) * 10; |
| info->pll_info.min_input_pxl_clk_pll_frequency = |
| le16_to_cpu(firmware_info->usMinPixelClockPLL_Input) * 10; |
| info->pll_info.max_input_pxl_clk_pll_frequency = |
| le16_to_cpu(firmware_info->usMaxPixelClockPLL_Input) * 10; |
| info->pll_info.min_output_pxl_clk_pll_frequency = |
| le32_to_cpu(firmware_info->ulMinPixelClockPLL_Output) * 10; |
| info->pll_info.max_output_pxl_clk_pll_frequency = |
| le32_to_cpu(firmware_info->ulMaxPixelClockPLL_Output) * 10; |
| |
| if (firmware_info->usFirmwareCapability.sbfAccess.MemoryClockSS_Support) |
| /* Since there is no information on the SS, report conservative |
| * value 3% for bandwidth calculation */ |
| /* unit of 0.01% */ |
| info->feature.memory_clk_ss_percentage = THREE_PERCENT_OF_10000; |
| |
| if (firmware_info->usFirmwareCapability.sbfAccess.EngineClockSS_Support) |
| /* Since there is no information on the SS,report conservative |
| * value 3% for bandwidth calculation */ |
| /* unit of 0.01% */ |
| info->feature.engine_clk_ss_percentage = THREE_PERCENT_OF_10000; |
| |
| return BP_RESULT_OK; |
| } |
| |
| static enum bp_result get_ss_info_v3_1( |
| struct bios_parser *bp, |
| uint32_t id, |
| uint32_t index, |
| struct spread_spectrum_info *ss_info); |
| |
| static enum bp_result get_firmware_info_v2_1( |
| struct bios_parser *bp, |
| struct dc_firmware_info *info) |
| { |
| ATOM_FIRMWARE_INFO_V2_1 *firmwareInfo = |
| GET_IMAGE(ATOM_FIRMWARE_INFO_V2_1, DATA_TABLES(FirmwareInfo)); |
| struct spread_spectrum_info internalSS; |
| uint32_t index; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| if (!firmwareInfo) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| memset(info, 0, sizeof(*info)); |
| |
| /* Pixel clock pll information. We need to convert from 10KHz units into |
| * KHz units */ |
| info->pll_info.crystal_frequency = |
| le16_to_cpu(firmwareInfo->usCoreReferenceClock) * 10; |
| info->pll_info.min_input_pxl_clk_pll_frequency = |
| le16_to_cpu(firmwareInfo->usMinPixelClockPLL_Input) * 10; |
| info->pll_info.max_input_pxl_clk_pll_frequency = |
| le16_to_cpu(firmwareInfo->usMaxPixelClockPLL_Input) * 10; |
| info->pll_info.min_output_pxl_clk_pll_frequency = |
| le32_to_cpu(firmwareInfo->ulMinPixelClockPLL_Output) * 10; |
| info->pll_info.max_output_pxl_clk_pll_frequency = |
| le32_to_cpu(firmwareInfo->ulMaxPixelClockPLL_Output) * 10; |
| info->default_display_engine_pll_frequency = |
| le32_to_cpu(firmwareInfo->ulDefaultDispEngineClkFreq) * 10; |
| info->external_clock_source_frequency_for_dp = |
| le16_to_cpu(firmwareInfo->usUniphyDPModeExtClkFreq) * 10; |
| info->min_allowed_bl_level = firmwareInfo->ucMinAllowedBL_Level; |
| |
| /* There should be only one entry in the SS info table for Memory Clock |
| */ |
| index = 0; |
| if (firmwareInfo->usFirmwareCapability.sbfAccess.MemoryClockSS_Support) |
| /* Since there is no information for external SS, report |
| * conservative value 3% for bandwidth calculation */ |
| /* unit of 0.01% */ |
| info->feature.memory_clk_ss_percentage = THREE_PERCENT_OF_10000; |
| else if (get_ss_info_v3_1(bp, |
| ASIC_INTERNAL_MEMORY_SS, index, &internalSS) == BP_RESULT_OK) { |
| if (internalSS.spread_spectrum_percentage) { |
| info->feature.memory_clk_ss_percentage = |
| internalSS.spread_spectrum_percentage; |
| if (internalSS.type.CENTER_MODE) { |
| /* if it is centermode, the exact SS Percentage |
| * will be round up of half of the percentage |
| * reported in the SS table */ |
| ++info->feature.memory_clk_ss_percentage; |
| info->feature.memory_clk_ss_percentage /= 2; |
| } |
| } |
| } |
| |
| /* There should be only one entry in the SS info table for Engine Clock |
| */ |
| index = 1; |
| if (firmwareInfo->usFirmwareCapability.sbfAccess.EngineClockSS_Support) |
| /* Since there is no information for external SS, report |
| * conservative value 3% for bandwidth calculation */ |
| /* unit of 0.01% */ |
| info->feature.engine_clk_ss_percentage = THREE_PERCENT_OF_10000; |
| else if (get_ss_info_v3_1(bp, |
| ASIC_INTERNAL_ENGINE_SS, index, &internalSS) == BP_RESULT_OK) { |
| if (internalSS.spread_spectrum_percentage) { |
| info->feature.engine_clk_ss_percentage = |
| internalSS.spread_spectrum_percentage; |
| if (internalSS.type.CENTER_MODE) { |
| /* if it is centermode, the exact SS Percentage |
| * will be round up of half of the percentage |
| * reported in the SS table */ |
| ++info->feature.engine_clk_ss_percentage; |
| info->feature.engine_clk_ss_percentage /= 2; |
| } |
| } |
| } |
| |
| return BP_RESULT_OK; |
| } |
| |
| static enum bp_result get_firmware_info_v2_2( |
| struct bios_parser *bp, |
| struct dc_firmware_info *info) |
| { |
| ATOM_FIRMWARE_INFO_V2_2 *firmware_info; |
| struct spread_spectrum_info internal_ss; |
| uint32_t index; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| firmware_info = GET_IMAGE(ATOM_FIRMWARE_INFO_V2_2, |
| DATA_TABLES(FirmwareInfo)); |
| |
| if (!firmware_info) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| memset(info, 0, sizeof(*info)); |
| |
| /* Pixel clock pll information. We need to convert from 10KHz units into |
| * KHz units */ |
| info->pll_info.crystal_frequency = |
| le16_to_cpu(firmware_info->usCoreReferenceClock) * 10; |
| info->pll_info.min_input_pxl_clk_pll_frequency = |
| le16_to_cpu(firmware_info->usMinPixelClockPLL_Input) * 10; |
| info->pll_info.max_input_pxl_clk_pll_frequency = |
| le16_to_cpu(firmware_info->usMaxPixelClockPLL_Input) * 10; |
| info->pll_info.min_output_pxl_clk_pll_frequency = |
| le32_to_cpu(firmware_info->ulMinPixelClockPLL_Output) * 10; |
| info->pll_info.max_output_pxl_clk_pll_frequency = |
| le32_to_cpu(firmware_info->ulMaxPixelClockPLL_Output) * 10; |
| info->default_display_engine_pll_frequency = |
| le32_to_cpu(firmware_info->ulDefaultDispEngineClkFreq) * 10; |
| info->external_clock_source_frequency_for_dp = |
| le16_to_cpu(firmware_info->usUniphyDPModeExtClkFreq) * 10; |
| |
| /* There should be only one entry in the SS info table for Memory Clock |
| */ |
| index = 0; |
| if (firmware_info->usFirmwareCapability.sbfAccess.MemoryClockSS_Support) |
| /* Since there is no information for external SS, report |
| * conservative value 3% for bandwidth calculation */ |
| /* unit of 0.01% */ |
| info->feature.memory_clk_ss_percentage = THREE_PERCENT_OF_10000; |
| else if (get_ss_info_v3_1(bp, |
| ASIC_INTERNAL_MEMORY_SS, index, &internal_ss) == BP_RESULT_OK) { |
| if (internal_ss.spread_spectrum_percentage) { |
| info->feature.memory_clk_ss_percentage = |
| internal_ss.spread_spectrum_percentage; |
| if (internal_ss.type.CENTER_MODE) { |
| /* if it is centermode, the exact SS Percentage |
| * will be round up of half of the percentage |
| * reported in the SS table */ |
| ++info->feature.memory_clk_ss_percentage; |
| info->feature.memory_clk_ss_percentage /= 2; |
| } |
| } |
| } |
| |
| /* There should be only one entry in the SS info table for Engine Clock |
| */ |
| index = 1; |
| if (firmware_info->usFirmwareCapability.sbfAccess.EngineClockSS_Support) |
| /* Since there is no information for external SS, report |
| * conservative value 3% for bandwidth calculation */ |
| /* unit of 0.01% */ |
| info->feature.engine_clk_ss_percentage = THREE_PERCENT_OF_10000; |
| else if (get_ss_info_v3_1(bp, |
| ASIC_INTERNAL_ENGINE_SS, index, &internal_ss) == BP_RESULT_OK) { |
| if (internal_ss.spread_spectrum_percentage) { |
| info->feature.engine_clk_ss_percentage = |
| internal_ss.spread_spectrum_percentage; |
| if (internal_ss.type.CENTER_MODE) { |
| /* if it is centermode, the exact SS Percentage |
| * will be round up of half of the percentage |
| * reported in the SS table */ |
| ++info->feature.engine_clk_ss_percentage; |
| info->feature.engine_clk_ss_percentage /= 2; |
| } |
| } |
| } |
| |
| /* Remote Display */ |
| info->remote_display_config = firmware_info->ucRemoteDisplayConfig; |
| |
| /* Is allowed minimum BL level */ |
| info->min_allowed_bl_level = firmware_info->ucMinAllowedBL_Level; |
| /* Used starting from CI */ |
| info->smu_gpu_pll_output_freq = |
| (uint32_t) (le32_to_cpu(firmware_info->ulGPUPLL_OutputFreq) * 10); |
| |
| return BP_RESULT_OK; |
| } |
| |
| static enum bp_result get_ss_info_v3_1( |
| struct bios_parser *bp, |
| uint32_t id, |
| uint32_t index, |
| struct spread_spectrum_info *ss_info) |
| { |
| ATOM_ASIC_INTERNAL_SS_INFO_V3 *ss_table_header_include; |
| ATOM_ASIC_SS_ASSIGNMENT_V3 *tbl; |
| uint32_t table_size; |
| uint32_t i; |
| uint32_t table_index = 0; |
| |
| if (!ss_info) |
| return BP_RESULT_BADINPUT; |
| |
| if (!DATA_TABLES(ASIC_InternalSS_Info)) |
| return BP_RESULT_UNSUPPORTED; |
| |
| ss_table_header_include = GET_IMAGE(ATOM_ASIC_INTERNAL_SS_INFO_V3, |
| DATA_TABLES(ASIC_InternalSS_Info)); |
| table_size = |
| (le16_to_cpu(ss_table_header_include->sHeader.usStructureSize) |
| - sizeof(ATOM_COMMON_TABLE_HEADER)) |
| / sizeof(ATOM_ASIC_SS_ASSIGNMENT_V3); |
| |
| tbl = (ATOM_ASIC_SS_ASSIGNMENT_V3 *) |
| &ss_table_header_include->asSpreadSpectrum[0]; |
| |
| memset(ss_info, 0, sizeof(struct spread_spectrum_info)); |
| |
| for (i = 0; i < table_size; i++) { |
| if (tbl[i].ucClockIndication != (uint8_t) id) |
| continue; |
| |
| if (table_index != index) { |
| table_index++; |
| continue; |
| } |
| /* VBIOS introduced new defines for Version 3, same values as |
| * before, so now use these new ones for Version 3. |
| * Shouldn't affect field VBIOS's V3 as define values are still |
| * same. |
| * #define SS_MODE_V3_CENTRE_SPREAD_MASK 0x01 |
| * #define SS_MODE_V3_EXTERNAL_SS_MASK 0x02 |
| |
| * Old VBIOS defines: |
| * #define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001 |
| * #define ATOM_EXTERNAL_SS_MASK 0x00000002 |
| */ |
| |
| if (SS_MODE_V3_EXTERNAL_SS_MASK & tbl[i].ucSpreadSpectrumMode) |
| ss_info->type.EXTERNAL = true; |
| |
| if (SS_MODE_V3_CENTRE_SPREAD_MASK & tbl[i].ucSpreadSpectrumMode) |
| ss_info->type.CENTER_MODE = true; |
| |
| /* Older VBIOS (in field) always provides SS percentage in 0.01% |
| * units set Divider to 100 */ |
| ss_info->spread_percentage_divider = 100; |
| |
| /* #define SS_MODE_V3_PERCENTAGE_DIV_BY_1000_MASK 0x10 */ |
| if (SS_MODE_V3_PERCENTAGE_DIV_BY_1000_MASK |
| & tbl[i].ucSpreadSpectrumMode) |
| ss_info->spread_percentage_divider = 1000; |
| |
| ss_info->type.STEP_AND_DELAY_INFO = false; |
| /* convert [10KHz] into [KHz] */ |
| ss_info->target_clock_range = |
| le32_to_cpu(tbl[i].ulTargetClockRange) * 10; |
| ss_info->spread_spectrum_percentage = |
| (uint32_t)le16_to_cpu(tbl[i].usSpreadSpectrumPercentage); |
| ss_info->spread_spectrum_range = |
| (uint32_t)(le16_to_cpu(tbl[i].usSpreadRateIn10Hz) * 10); |
| |
| return BP_RESULT_OK; |
| } |
| return BP_RESULT_NORECORD; |
| } |
| |
| static enum bp_result bios_parser_transmitter_control( |
| struct dc_bios *dcb, |
| struct bp_transmitter_control *cntl) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.transmitter_control) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.transmitter_control(bp, cntl); |
| } |
| |
| static enum bp_result bios_parser_encoder_control( |
| struct dc_bios *dcb, |
| struct bp_encoder_control *cntl) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.dig_encoder_control) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.dig_encoder_control(bp, cntl); |
| } |
| |
| static enum bp_result bios_parser_adjust_pixel_clock( |
| struct dc_bios *dcb, |
| struct bp_adjust_pixel_clock_parameters *bp_params) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.adjust_display_pll) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.adjust_display_pll(bp, bp_params); |
| } |
| |
| static enum bp_result bios_parser_set_pixel_clock( |
| struct dc_bios *dcb, |
| struct bp_pixel_clock_parameters *bp_params) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.set_pixel_clock) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.set_pixel_clock(bp, bp_params); |
| } |
| |
| static enum bp_result bios_parser_set_dce_clock( |
| struct dc_bios *dcb, |
| struct bp_set_dce_clock_parameters *bp_params) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.set_dce_clock) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.set_dce_clock(bp, bp_params); |
| } |
| |
| static enum bp_result bios_parser_enable_spread_spectrum_on_ppll( |
| struct dc_bios *dcb, |
| struct bp_spread_spectrum_parameters *bp_params, |
| bool enable) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.enable_spread_spectrum_on_ppll) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.enable_spread_spectrum_on_ppll( |
| bp, bp_params, enable); |
| |
| } |
| |
| static enum bp_result bios_parser_program_crtc_timing( |
| struct dc_bios *dcb, |
| struct bp_hw_crtc_timing_parameters *bp_params) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.set_crtc_timing) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.set_crtc_timing(bp, bp_params); |
| } |
| |
| static enum bp_result bios_parser_program_display_engine_pll( |
| struct dc_bios *dcb, |
| struct bp_pixel_clock_parameters *bp_params) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.program_clock) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.program_clock(bp, bp_params); |
| |
| } |
| |
| |
| static enum bp_result bios_parser_enable_crtc( |
| struct dc_bios *dcb, |
| enum controller_id id, |
| bool enable) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.enable_crtc) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.enable_crtc(bp, id, enable); |
| } |
| |
| static enum bp_result bios_parser_crtc_source_select( |
| struct dc_bios *dcb, |
| struct bp_crtc_source_select *bp_params) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.select_crtc_source) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.select_crtc_source(bp, bp_params); |
| } |
| |
| static enum bp_result bios_parser_enable_disp_power_gating( |
| struct dc_bios *dcb, |
| enum controller_id controller_id, |
| enum bp_pipe_control_action action) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| if (!bp->cmd_tbl.enable_disp_power_gating) |
| return BP_RESULT_FAILURE; |
| |
| return bp->cmd_tbl.enable_disp_power_gating(bp, controller_id, |
| action); |
| } |
| |
| static bool bios_parser_is_device_id_supported( |
| struct dc_bios *dcb, |
| struct device_id id) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| uint32_t mask = get_support_mask_for_device_id(id); |
| |
| return (le16_to_cpu(bp->object_info_tbl.v1_1->usDeviceSupport) & mask) != 0; |
| } |
| |
| static enum bp_result bios_parser_crt_control( |
| struct dc_bios *dcb, |
| enum engine_id engine_id, |
| bool enable, |
| uint32_t pixel_clock) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| uint8_t standard; |
| |
| if (!bp->cmd_tbl.dac1_encoder_control && |
| engine_id == ENGINE_ID_DACA) |
| return BP_RESULT_FAILURE; |
| if (!bp->cmd_tbl.dac2_encoder_control && |
| engine_id == ENGINE_ID_DACB) |
| return BP_RESULT_FAILURE; |
| /* validate params */ |
| switch (engine_id) { |
| case ENGINE_ID_DACA: |
| case ENGINE_ID_DACB: |
| break; |
| default: |
| /* unsupported engine */ |
| return BP_RESULT_FAILURE; |
| } |
| |
| standard = ATOM_DAC1_PS2; /* == ATOM_DAC2_PS2 */ |
| |
| if (enable) { |
| if (engine_id == ENGINE_ID_DACA) { |
| bp->cmd_tbl.dac1_encoder_control(bp, enable, |
| pixel_clock, standard); |
| if (bp->cmd_tbl.dac1_output_control != NULL) |
| bp->cmd_tbl.dac1_output_control(bp, enable); |
| } else { |
| bp->cmd_tbl.dac2_encoder_control(bp, enable, |
| pixel_clock, standard); |
| if (bp->cmd_tbl.dac2_output_control != NULL) |
| bp->cmd_tbl.dac2_output_control(bp, enable); |
| } |
| } else { |
| if (engine_id == ENGINE_ID_DACA) { |
| if (bp->cmd_tbl.dac1_output_control != NULL) |
| bp->cmd_tbl.dac1_output_control(bp, enable); |
| bp->cmd_tbl.dac1_encoder_control(bp, enable, |
| pixel_clock, standard); |
| } else { |
| if (bp->cmd_tbl.dac2_output_control != NULL) |
| bp->cmd_tbl.dac2_output_control(bp, enable); |
| bp->cmd_tbl.dac2_encoder_control(bp, enable, |
| pixel_clock, standard); |
| } |
| } |
| |
| return BP_RESULT_OK; |
| } |
| |
| static ATOM_HPD_INT_RECORD *get_hpd_record(struct bios_parser *bp, |
| ATOM_OBJECT *object) |
| { |
| ATOM_COMMON_RECORD_HEADER *header; |
| uint32_t offset; |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); /* Invalid object */ |
| return NULL; |
| } |
| |
| offset = le16_to_cpu(object->usRecordOffset) |
| + bp->object_info_tbl_offset; |
| |
| for (;;) { |
| header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, offset); |
| |
| if (!header) |
| return NULL; |
| |
| if (LAST_RECORD_TYPE == header->ucRecordType || |
| !header->ucRecordSize) |
| break; |
| |
| if (ATOM_HPD_INT_RECORD_TYPE == header->ucRecordType |
| && sizeof(ATOM_HPD_INT_RECORD) <= header->ucRecordSize) |
| return (ATOM_HPD_INT_RECORD *) header; |
| |
| offset += header->ucRecordSize; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * Get I2C information of input object id |
| * |
| * search all records to find the ATOM_I2C_RECORD_TYPE record IR |
| */ |
| static ATOM_I2C_RECORD *get_i2c_record( |
| struct bios_parser *bp, |
| ATOM_OBJECT *object) |
| { |
| uint32_t offset; |
| ATOM_COMMON_RECORD_HEADER *record_header; |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); |
| /* Invalid object */ |
| return NULL; |
| } |
| |
| offset = le16_to_cpu(object->usRecordOffset) |
| + bp->object_info_tbl_offset; |
| |
| for (;;) { |
| record_header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, offset); |
| |
| if (!record_header) |
| return NULL; |
| |
| if (LAST_RECORD_TYPE == record_header->ucRecordType || |
| 0 == record_header->ucRecordSize) |
| break; |
| |
| if (ATOM_I2C_RECORD_TYPE == record_header->ucRecordType && |
| sizeof(ATOM_I2C_RECORD) <= |
| record_header->ucRecordSize) { |
| return (ATOM_I2C_RECORD *)record_header; |
| } |
| |
| offset += record_header->ucRecordSize; |
| } |
| |
| return NULL; |
| } |
| |
| static enum bp_result get_ss_info_from_ss_info_table( |
| struct bios_parser *bp, |
| uint32_t id, |
| struct spread_spectrum_info *ss_info); |
| static enum bp_result get_ss_info_from_tbl( |
| struct bios_parser *bp, |
| uint32_t id, |
| struct spread_spectrum_info *ss_info); |
| /** |
| * bios_parser_get_spread_spectrum_info |
| * Get spread spectrum information from the ASIC_InternalSS_Info(ver 2.1 or |
| * ver 3.1) or SS_Info table from the VBIOS. Currently ASIC_InternalSS_Info |
| * ver 2.1 can co-exist with SS_Info table. Expect ASIC_InternalSS_Info ver 3.1, |
| * there is only one entry for each signal /ss id. However, there is |
| * no planning of supporting multiple spread Sprectum entry for EverGreen |
| * @param [in] this |
| * @param [in] signal, ASSignalType to be converted to info index |
| * @param [in] index, number of entries that match the converted info index |
| * @param [out] ss_info, sprectrum information structure, |
| * @return Bios parser result code |
| */ |
| static enum bp_result bios_parser_get_spread_spectrum_info( |
| struct dc_bios *dcb, |
| enum as_signal_type signal, |
| uint32_t index, |
| struct spread_spectrum_info *ss_info) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| enum bp_result result = BP_RESULT_UNSUPPORTED; |
| uint32_t clk_id_ss = 0; |
| ATOM_COMMON_TABLE_HEADER *header; |
| struct atom_data_revision tbl_revision; |
| |
| if (!ss_info) /* check for bad input */ |
| return BP_RESULT_BADINPUT; |
| /* signal translation */ |
| clk_id_ss = signal_to_ss_id(signal); |
| |
| if (!DATA_TABLES(ASIC_InternalSS_Info)) |
| if (!index) |
| return get_ss_info_from_ss_info_table(bp, clk_id_ss, |
| ss_info); |
| |
| header = GET_IMAGE(ATOM_COMMON_TABLE_HEADER, |
| DATA_TABLES(ASIC_InternalSS_Info)); |
| get_atom_data_table_revision(header, &tbl_revision); |
| |
| switch (tbl_revision.major) { |
| case 2: |
| switch (tbl_revision.minor) { |
| case 1: |
| /* there can not be more then one entry for Internal |
| * SS Info table version 2.1 */ |
| if (!index) |
| return get_ss_info_from_tbl(bp, clk_id_ss, |
| ss_info); |
| break; |
| default: |
| break; |
| } |
| break; |
| |
| case 3: |
| switch (tbl_revision.minor) { |
| case 1: |
| return get_ss_info_v3_1(bp, clk_id_ss, index, ss_info); |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| /* there can not be more then one entry for SS Info table */ |
| return result; |
| } |
| |
| static enum bp_result get_ss_info_from_internal_ss_info_tbl_V2_1( |
| struct bios_parser *bp, |
| uint32_t id, |
| struct spread_spectrum_info *info); |
| |
| /** |
| * get_ss_info_from_table |
| * Get spread sprectrum information from the ASIC_InternalSS_Info Ver 2.1 or |
| * SS_Info table from the VBIOS |
| * There can not be more than 1 entry for ASIC_InternalSS_Info Ver 2.1 or |
| * SS_Info. |
| * |
| * @param this |
| * @param id, spread sprectrum info index |
| * @param pSSinfo, sprectrum information structure, |
| * @return Bios parser result code |
| */ |
| static enum bp_result get_ss_info_from_tbl( |
| struct bios_parser *bp, |
| uint32_t id, |
| struct spread_spectrum_info *ss_info) |
| { |
| if (!ss_info) /* check for bad input, if ss_info is not NULL */ |
| return BP_RESULT_BADINPUT; |
| /* for SS_Info table only support DP and LVDS */ |
| if (id == ASIC_INTERNAL_SS_ON_DP || id == ASIC_INTERNAL_SS_ON_LVDS) |
| return get_ss_info_from_ss_info_table(bp, id, ss_info); |
| else |
| return get_ss_info_from_internal_ss_info_tbl_V2_1(bp, id, |
| ss_info); |
| } |
| |
| /** |
| * get_ss_info_from_internal_ss_info_tbl_V2_1 |
| * Get spread sprectrum information from the ASIC_InternalSS_Info table Ver 2.1 |
| * from the VBIOS |
| * There will not be multiple entry for Ver 2.1 |
| * |
| * @param id, spread sprectrum info index |
| * @param pSSinfo, sprectrum information structure, |
| * @return Bios parser result code |
| */ |
| static enum bp_result get_ss_info_from_internal_ss_info_tbl_V2_1( |
| struct bios_parser *bp, |
| uint32_t id, |
| struct spread_spectrum_info *info) |
| { |
| enum bp_result result = BP_RESULT_UNSUPPORTED; |
| ATOM_ASIC_INTERNAL_SS_INFO_V2 *header; |
| ATOM_ASIC_SS_ASSIGNMENT_V2 *tbl; |
| uint32_t tbl_size, i; |
| |
| if (!DATA_TABLES(ASIC_InternalSS_Info)) |
| return result; |
| |
| header = GET_IMAGE(ATOM_ASIC_INTERNAL_SS_INFO_V2, |
| DATA_TABLES(ASIC_InternalSS_Info)); |
| |
| memset(info, 0, sizeof(struct spread_spectrum_info)); |
| |
| tbl_size = (le16_to_cpu(header->sHeader.usStructureSize) |
| - sizeof(ATOM_COMMON_TABLE_HEADER)) |
| / sizeof(ATOM_ASIC_SS_ASSIGNMENT_V2); |
| |
| tbl = (ATOM_ASIC_SS_ASSIGNMENT_V2 *) |
| &(header->asSpreadSpectrum[0]); |
| for (i = 0; i < tbl_size; i++) { |
| result = BP_RESULT_NORECORD; |
| |
| if (tbl[i].ucClockIndication != (uint8_t)id) |
| continue; |
| |
| if (ATOM_EXTERNAL_SS_MASK |
| & tbl[i].ucSpreadSpectrumMode) { |
| info->type.EXTERNAL = true; |
| } |
| if (ATOM_SS_CENTRE_SPREAD_MODE_MASK |
| & tbl[i].ucSpreadSpectrumMode) { |
| info->type.CENTER_MODE = true; |
| } |
| info->type.STEP_AND_DELAY_INFO = false; |
| /* convert [10KHz] into [KHz] */ |
| info->target_clock_range = |
| le32_to_cpu(tbl[i].ulTargetClockRange) * 10; |
| info->spread_spectrum_percentage = |
| (uint32_t)le16_to_cpu(tbl[i].usSpreadSpectrumPercentage); |
| info->spread_spectrum_range = |
| (uint32_t)(le16_to_cpu(tbl[i].usSpreadRateIn10Hz) * 10); |
| result = BP_RESULT_OK; |
| break; |
| } |
| |
| return result; |
| |
| } |
| |
| /** |
| * get_ss_info_from_ss_info_table |
| * Get spread sprectrum information from the SS_Info table from the VBIOS |
| * if the pointer to info is NULL, indicate the caller what to know the number |
| * of entries that matches the id |
| * for, the SS_Info table, there should not be more than 1 entry match. |
| * |
| * @param [in] id, spread sprectrum id |
| * @param [out] pSSinfo, sprectrum information structure, |
| * @return Bios parser result code |
| */ |
| static enum bp_result get_ss_info_from_ss_info_table( |
| struct bios_parser *bp, |
| uint32_t id, |
| struct spread_spectrum_info *ss_info) |
| { |
| enum bp_result result = BP_RESULT_UNSUPPORTED; |
| ATOM_SPREAD_SPECTRUM_INFO *tbl; |
| ATOM_COMMON_TABLE_HEADER *header; |
| uint32_t table_size; |
| uint32_t i; |
| uint32_t id_local = SS_ID_UNKNOWN; |
| struct atom_data_revision revision; |
| |
| /* exist of the SS_Info table */ |
| /* check for bad input, pSSinfo can not be NULL */ |
| if (!DATA_TABLES(SS_Info) || !ss_info) |
| return result; |
| |
| header = GET_IMAGE(ATOM_COMMON_TABLE_HEADER, DATA_TABLES(SS_Info)); |
| get_atom_data_table_revision(header, &revision); |
| |
| tbl = GET_IMAGE(ATOM_SPREAD_SPECTRUM_INFO, DATA_TABLES(SS_Info)); |
| |
| if (1 != revision.major || 2 > revision.minor) |
| return result; |
| |
| /* have to convert from Internal_SS format to SS_Info format */ |
| switch (id) { |
| case ASIC_INTERNAL_SS_ON_DP: |
| id_local = SS_ID_DP1; |
| break; |
| case ASIC_INTERNAL_SS_ON_LVDS: |
| { |
| struct embedded_panel_info panel_info; |
| |
| if (bios_parser_get_embedded_panel_info(&bp->base, &panel_info) |
| == BP_RESULT_OK) |
| id_local = panel_info.ss_id; |
| break; |
| } |
| default: |
| break; |
| } |
| |
| if (id_local == SS_ID_UNKNOWN) |
| return result; |
| |
| table_size = (le16_to_cpu(tbl->sHeader.usStructureSize) - |
| sizeof(ATOM_COMMON_TABLE_HEADER)) / |
| sizeof(ATOM_SPREAD_SPECTRUM_ASSIGNMENT); |
| |
| for (i = 0; i < table_size; i++) { |
| if (id_local != (uint32_t)tbl->asSS_Info[i].ucSS_Id) |
| continue; |
| |
| memset(ss_info, 0, sizeof(struct spread_spectrum_info)); |
| |
| if (ATOM_EXTERNAL_SS_MASK & |
| tbl->asSS_Info[i].ucSpreadSpectrumType) |
| ss_info->type.EXTERNAL = true; |
| |
| if (ATOM_SS_CENTRE_SPREAD_MODE_MASK & |
| tbl->asSS_Info[i].ucSpreadSpectrumType) |
| ss_info->type.CENTER_MODE = true; |
| |
| ss_info->type.STEP_AND_DELAY_INFO = true; |
| ss_info->spread_spectrum_percentage = |
| (uint32_t)le16_to_cpu(tbl->asSS_Info[i].usSpreadSpectrumPercentage); |
| ss_info->step_and_delay_info.step = tbl->asSS_Info[i].ucSS_Step; |
| ss_info->step_and_delay_info.delay = |
| tbl->asSS_Info[i].ucSS_Delay; |
| ss_info->step_and_delay_info.recommended_ref_div = |
| tbl->asSS_Info[i].ucRecommendedRef_Div; |
| ss_info->spread_spectrum_range = |
| (uint32_t)tbl->asSS_Info[i].ucSS_Range * 10000; |
| |
| /* there will be only one entry for each display type in SS_info |
| * table */ |
| result = BP_RESULT_OK; |
| break; |
| } |
| |
| return result; |
| } |
| static enum bp_result get_embedded_panel_info_v1_2( |
| struct bios_parser *bp, |
| struct embedded_panel_info *info); |
| static enum bp_result get_embedded_panel_info_v1_3( |
| struct bios_parser *bp, |
| struct embedded_panel_info *info); |
| |
| static enum bp_result bios_parser_get_embedded_panel_info( |
| struct dc_bios *dcb, |
| struct embedded_panel_info *info) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| ATOM_COMMON_TABLE_HEADER *hdr; |
| |
| if (!DATA_TABLES(LCD_Info)) |
| return BP_RESULT_FAILURE; |
| |
| hdr = GET_IMAGE(ATOM_COMMON_TABLE_HEADER, DATA_TABLES(LCD_Info)); |
| |
| if (!hdr) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| switch (hdr->ucTableFormatRevision) { |
| case 1: |
| switch (hdr->ucTableContentRevision) { |
| case 0: |
| case 1: |
| case 2: |
| return get_embedded_panel_info_v1_2(bp, info); |
| case 3: |
| return get_embedded_panel_info_v1_3(bp, info); |
| default: |
| break; |
| } |
| default: |
| break; |
| } |
| |
| return BP_RESULT_FAILURE; |
| } |
| |
| static enum bp_result get_embedded_panel_info_v1_2( |
| struct bios_parser *bp, |
| struct embedded_panel_info *info) |
| { |
| ATOM_LVDS_INFO_V12 *lvds; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| if (!DATA_TABLES(LVDS_Info)) |
| return BP_RESULT_UNSUPPORTED; |
| |
| lvds = |
| GET_IMAGE(ATOM_LVDS_INFO_V12, DATA_TABLES(LVDS_Info)); |
| |
| if (!lvds) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| if (1 != lvds->sHeader.ucTableFormatRevision |
| || 2 > lvds->sHeader.ucTableContentRevision) |
| return BP_RESULT_UNSUPPORTED; |
| |
| memset(info, 0, sizeof(struct embedded_panel_info)); |
| |
| /* We need to convert from 10KHz units into KHz units*/ |
| info->lcd_timing.pixel_clk = |
| le16_to_cpu(lvds->sLCDTiming.usPixClk) * 10; |
| /* usHActive does not include borders, according to VBIOS team*/ |
| info->lcd_timing.horizontal_addressable = |
| le16_to_cpu(lvds->sLCDTiming.usHActive); |
| /* usHBlanking_Time includes borders, so we should really be subtracting |
| * borders duing this translation, but LVDS generally*/ |
| /* doesn't have borders, so we should be okay leaving this as is for |
| * now. May need to revisit if we ever have LVDS with borders*/ |
| info->lcd_timing.horizontal_blanking_time = |
| le16_to_cpu(lvds->sLCDTiming.usHBlanking_Time); |
| /* usVActive does not include borders, according to VBIOS team*/ |
| info->lcd_timing.vertical_addressable = |
| le16_to_cpu(lvds->sLCDTiming.usVActive); |
| /* usVBlanking_Time includes borders, so we should really be subtracting |
| * borders duing this translation, but LVDS generally*/ |
| /* doesn't have borders, so we should be okay leaving this as is for |
| * now. May need to revisit if we ever have LVDS with borders*/ |
| info->lcd_timing.vertical_blanking_time = |
| le16_to_cpu(lvds->sLCDTiming.usVBlanking_Time); |
| info->lcd_timing.horizontal_sync_offset = |
| le16_to_cpu(lvds->sLCDTiming.usHSyncOffset); |
| info->lcd_timing.horizontal_sync_width = |
| le16_to_cpu(lvds->sLCDTiming.usHSyncWidth); |
| info->lcd_timing.vertical_sync_offset = |
| le16_to_cpu(lvds->sLCDTiming.usVSyncOffset); |
| info->lcd_timing.vertical_sync_width = |
| le16_to_cpu(lvds->sLCDTiming.usVSyncWidth); |
| info->lcd_timing.horizontal_border = lvds->sLCDTiming.ucHBorder; |
| info->lcd_timing.vertical_border = lvds->sLCDTiming.ucVBorder; |
| info->lcd_timing.misc_info.HORIZONTAL_CUT_OFF = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.HorizontalCutOff; |
| info->lcd_timing.misc_info.H_SYNC_POLARITY = |
| ~(uint32_t) |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.HSyncPolarity; |
| info->lcd_timing.misc_info.V_SYNC_POLARITY = |
| ~(uint32_t) |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.VSyncPolarity; |
| info->lcd_timing.misc_info.VERTICAL_CUT_OFF = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.VerticalCutOff; |
| info->lcd_timing.misc_info.H_REPLICATION_BY2 = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.H_ReplicationBy2; |
| info->lcd_timing.misc_info.V_REPLICATION_BY2 = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.V_ReplicationBy2; |
| info->lcd_timing.misc_info.COMPOSITE_SYNC = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.CompositeSync; |
| info->lcd_timing.misc_info.INTERLACE = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.Interlace; |
| info->lcd_timing.misc_info.DOUBLE_CLOCK = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.DoubleClock; |
| info->ss_id = lvds->ucSS_Id; |
| |
| { |
| uint8_t rr = le16_to_cpu(lvds->usSupportedRefreshRate); |
| /* Get minimum supported refresh rate*/ |
| if (SUPPORTED_LCD_REFRESHRATE_30Hz & rr) |
| info->supported_rr.REFRESH_RATE_30HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_40Hz & rr) |
| info->supported_rr.REFRESH_RATE_40HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_48Hz & rr) |
| info->supported_rr.REFRESH_RATE_48HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_50Hz & rr) |
| info->supported_rr.REFRESH_RATE_50HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_60Hz & rr) |
| info->supported_rr.REFRESH_RATE_60HZ = 1; |
| } |
| |
| /*Drr panel support can be reported by VBIOS*/ |
| if (LCDPANEL_CAP_DRR_SUPPORTED |
| & lvds->ucLCDPanel_SpecialHandlingCap) |
| info->drr_enabled = 1; |
| |
| if (ATOM_PANEL_MISC_DUAL & lvds->ucLVDS_Misc) |
| info->lcd_timing.misc_info.DOUBLE_CLOCK = true; |
| |
| if (ATOM_PANEL_MISC_888RGB & lvds->ucLVDS_Misc) |
| info->lcd_timing.misc_info.RGB888 = true; |
| |
| info->lcd_timing.misc_info.GREY_LEVEL = |
| (uint32_t) (ATOM_PANEL_MISC_GREY_LEVEL & |
| lvds->ucLVDS_Misc) >> ATOM_PANEL_MISC_GREY_LEVEL_SHIFT; |
| |
| if (ATOM_PANEL_MISC_SPATIAL & lvds->ucLVDS_Misc) |
| info->lcd_timing.misc_info.SPATIAL = true; |
| |
| if (ATOM_PANEL_MISC_TEMPORAL & lvds->ucLVDS_Misc) |
| info->lcd_timing.misc_info.TEMPORAL = true; |
| |
| if (ATOM_PANEL_MISC_API_ENABLED & lvds->ucLVDS_Misc) |
| info->lcd_timing.misc_info.API_ENABLED = true; |
| |
| return BP_RESULT_OK; |
| } |
| |
| static enum bp_result get_embedded_panel_info_v1_3( |
| struct bios_parser *bp, |
| struct embedded_panel_info *info) |
| { |
| ATOM_LCD_INFO_V13 *lvds; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| if (!DATA_TABLES(LCD_Info)) |
| return BP_RESULT_UNSUPPORTED; |
| |
| lvds = GET_IMAGE(ATOM_LCD_INFO_V13, DATA_TABLES(LCD_Info)); |
| |
| if (!lvds) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| if (!((1 == lvds->sHeader.ucTableFormatRevision) |
| && (3 <= lvds->sHeader.ucTableContentRevision))) |
| return BP_RESULT_UNSUPPORTED; |
| |
| memset(info, 0, sizeof(struct embedded_panel_info)); |
| |
| /* We need to convert from 10KHz units into KHz units */ |
| info->lcd_timing.pixel_clk = |
| le16_to_cpu(lvds->sLCDTiming.usPixClk) * 10; |
| /* usHActive does not include borders, according to VBIOS team */ |
| info->lcd_timing.horizontal_addressable = |
| le16_to_cpu(lvds->sLCDTiming.usHActive); |
| /* usHBlanking_Time includes borders, so we should really be subtracting |
| * borders duing this translation, but LVDS generally*/ |
| /* doesn't have borders, so we should be okay leaving this as is for |
| * now. May need to revisit if we ever have LVDS with borders*/ |
| info->lcd_timing.horizontal_blanking_time = |
| le16_to_cpu(lvds->sLCDTiming.usHBlanking_Time); |
| /* usVActive does not include borders, according to VBIOS team*/ |
| info->lcd_timing.vertical_addressable = |
| le16_to_cpu(lvds->sLCDTiming.usVActive); |
| /* usVBlanking_Time includes borders, so we should really be subtracting |
| * borders duing this translation, but LVDS generally*/ |
| /* doesn't have borders, so we should be okay leaving this as is for |
| * now. May need to revisit if we ever have LVDS with borders*/ |
| info->lcd_timing.vertical_blanking_time = |
| le16_to_cpu(lvds->sLCDTiming.usVBlanking_Time); |
| info->lcd_timing.horizontal_sync_offset = |
| le16_to_cpu(lvds->sLCDTiming.usHSyncOffset); |
| info->lcd_timing.horizontal_sync_width = |
| le16_to_cpu(lvds->sLCDTiming.usHSyncWidth); |
| info->lcd_timing.vertical_sync_offset = |
| le16_to_cpu(lvds->sLCDTiming.usVSyncOffset); |
| info->lcd_timing.vertical_sync_width = |
| le16_to_cpu(lvds->sLCDTiming.usVSyncWidth); |
| info->lcd_timing.horizontal_border = lvds->sLCDTiming.ucHBorder; |
| info->lcd_timing.vertical_border = lvds->sLCDTiming.ucVBorder; |
| info->lcd_timing.misc_info.HORIZONTAL_CUT_OFF = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.HorizontalCutOff; |
| info->lcd_timing.misc_info.H_SYNC_POLARITY = |
| ~(uint32_t) |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.HSyncPolarity; |
| info->lcd_timing.misc_info.V_SYNC_POLARITY = |
| ~(uint32_t) |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.VSyncPolarity; |
| info->lcd_timing.misc_info.VERTICAL_CUT_OFF = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.VerticalCutOff; |
| info->lcd_timing.misc_info.H_REPLICATION_BY2 = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.H_ReplicationBy2; |
| info->lcd_timing.misc_info.V_REPLICATION_BY2 = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.V_ReplicationBy2; |
| info->lcd_timing.misc_info.COMPOSITE_SYNC = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.CompositeSync; |
| info->lcd_timing.misc_info.INTERLACE = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.Interlace; |
| info->lcd_timing.misc_info.DOUBLE_CLOCK = |
| lvds->sLCDTiming.susModeMiscInfo.sbfAccess.DoubleClock; |
| info->ss_id = lvds->ucSS_Id; |
| |
| /* Drr panel support can be reported by VBIOS*/ |
| if (LCDPANEL_CAP_V13_DRR_SUPPORTED |
| & lvds->ucLCDPanel_SpecialHandlingCap) |
| info->drr_enabled = 1; |
| |
| /* Get supported refresh rate*/ |
| if (info->drr_enabled == 1) { |
| uint8_t min_rr = |
| lvds->sRefreshRateSupport.ucMinRefreshRateForDRR; |
| uint8_t rr = lvds->sRefreshRateSupport.ucSupportedRefreshRate; |
| |
| if (min_rr != 0) { |
| if (SUPPORTED_LCD_REFRESHRATE_30Hz & min_rr) |
| info->supported_rr.REFRESH_RATE_30HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_40Hz & min_rr) |
| info->supported_rr.REFRESH_RATE_40HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_48Hz & min_rr) |
| info->supported_rr.REFRESH_RATE_48HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_50Hz & min_rr) |
| info->supported_rr.REFRESH_RATE_50HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_60Hz & min_rr) |
| info->supported_rr.REFRESH_RATE_60HZ = 1; |
| } else { |
| if (SUPPORTED_LCD_REFRESHRATE_30Hz & rr) |
| info->supported_rr.REFRESH_RATE_30HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_40Hz & rr) |
| info->supported_rr.REFRESH_RATE_40HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_48Hz & rr) |
| info->supported_rr.REFRESH_RATE_48HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_50Hz & rr) |
| info->supported_rr.REFRESH_RATE_50HZ = 1; |
| else if (SUPPORTED_LCD_REFRESHRATE_60Hz & rr) |
| info->supported_rr.REFRESH_RATE_60HZ = 1; |
| } |
| } |
| |
| if (ATOM_PANEL_MISC_V13_DUAL & lvds->ucLCD_Misc) |
| info->lcd_timing.misc_info.DOUBLE_CLOCK = true; |
| |
| if (ATOM_PANEL_MISC_V13_8BIT_PER_COLOR & lvds->ucLCD_Misc) |
| info->lcd_timing.misc_info.RGB888 = true; |
| |
| info->lcd_timing.misc_info.GREY_LEVEL = |
| (uint32_t) (ATOM_PANEL_MISC_V13_GREY_LEVEL & |
| lvds->ucLCD_Misc) >> ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT; |
| |
| return BP_RESULT_OK; |
| } |
| |
| /** |
| * bios_parser_get_encoder_cap_info |
| * |
| * @brief |
| * Get encoder capability information of input object id |
| * |
| * @param object_id, Object id |
| * @param object_id, encoder cap information structure |
| * |
| * @return Bios parser result code |
| * |
| */ |
| static enum bp_result bios_parser_get_encoder_cap_info( |
| struct dc_bios *dcb, |
| struct graphics_object_id object_id, |
| struct bp_encoder_cap_info *info) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| ATOM_OBJECT *object; |
| ATOM_ENCODER_CAP_RECORD_V2 *record = NULL; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| object = get_bios_object(bp, object_id); |
| |
| if (!object) |
| return BP_RESULT_BADINPUT; |
| |
| record = get_encoder_cap_record(bp, object); |
| if (!record) |
| return BP_RESULT_NORECORD; |
| |
| info->DP_HBR2_EN = record->usHBR2En; |
| info->DP_HBR3_EN = record->usHBR3En; |
| info->HDMI_6GB_EN = record->usHDMI6GEn; |
| return BP_RESULT_OK; |
| } |
| |
| /** |
| * get_encoder_cap_record |
| * |
| * @brief |
| * Get encoder cap record for the object |
| * |
| * @param object, ATOM object |
| * |
| * @return atom encoder cap record |
| * |
| * @note |
| * search all records to find the ATOM_ENCODER_CAP_RECORD_V2 record |
| */ |
| static ATOM_ENCODER_CAP_RECORD_V2 *get_encoder_cap_record( |
| struct bios_parser *bp, |
| ATOM_OBJECT *object) |
| { |
| ATOM_COMMON_RECORD_HEADER *header; |
| uint32_t offset; |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); /* Invalid object */ |
| return NULL; |
| } |
| |
| offset = le16_to_cpu(object->usRecordOffset) |
| + bp->object_info_tbl_offset; |
| |
| for (;;) { |
| header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, offset); |
| |
| if (!header) |
| return NULL; |
| |
| offset += header->ucRecordSize; |
| |
| if (LAST_RECORD_TYPE == header->ucRecordType || |
| !header->ucRecordSize) |
| break; |
| |
| if (ATOM_ENCODER_CAP_RECORD_TYPE != header->ucRecordType) |
| continue; |
| |
| if (sizeof(ATOM_ENCODER_CAP_RECORD_V2) <= header->ucRecordSize) |
| return (ATOM_ENCODER_CAP_RECORD_V2 *)header; |
| } |
| |
| return NULL; |
| } |
| |
| static uint32_t get_ss_entry_number( |
| struct bios_parser *bp, |
| uint32_t id); |
| static uint32_t get_ss_entry_number_from_internal_ss_info_tbl_v2_1( |
| struct bios_parser *bp, |
| uint32_t id); |
| static uint32_t get_ss_entry_number_from_internal_ss_info_tbl_V3_1( |
| struct bios_parser *bp, |
| uint32_t id); |
| static uint32_t get_ss_entry_number_from_ss_info_tbl( |
| struct bios_parser *bp, |
| uint32_t id); |
| |
| /** |
| * BiosParserObject::GetNumberofSpreadSpectrumEntry |
| * Get Number of SpreadSpectrum Entry from the ASIC_InternalSS_Info table from |
| * the VBIOS that match the SSid (to be converted from signal) |
| * |
| * @param[in] signal, ASSignalType to be converted to SSid |
| * @return number of SS Entry that match the signal |
| */ |
| static uint32_t bios_parser_get_ss_entry_number( |
| struct dc_bios *dcb, |
| enum as_signal_type signal) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| uint32_t ss_id = 0; |
| ATOM_COMMON_TABLE_HEADER *header; |
| struct atom_data_revision revision; |
| |
| ss_id = signal_to_ss_id(signal); |
| |
| if (!DATA_TABLES(ASIC_InternalSS_Info)) |
| return get_ss_entry_number_from_ss_info_tbl(bp, ss_id); |
| |
| header = GET_IMAGE(ATOM_COMMON_TABLE_HEADER, |
| DATA_TABLES(ASIC_InternalSS_Info)); |
| get_atom_data_table_revision(header, &revision); |
| |
| switch (revision.major) { |
| case 2: |
| switch (revision.minor) { |
| case 1: |
| return get_ss_entry_number(bp, ss_id); |
| default: |
| break; |
| } |
| break; |
| case 3: |
| switch (revision.minor) { |
| case 1: |
| return |
| get_ss_entry_number_from_internal_ss_info_tbl_V3_1( |
| bp, ss_id); |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * get_ss_entry_number_from_ss_info_tbl |
| * Get Number of spread spectrum entry from the SS_Info table from the VBIOS. |
| * |
| * @note There can only be one entry for each id for SS_Info Table |
| * |
| * @param [in] id, spread spectrum id |
| * @return number of SS Entry that match the id |
| */ |
| static uint32_t get_ss_entry_number_from_ss_info_tbl( |
| struct bios_parser *bp, |
| uint32_t id) |
| { |
| ATOM_SPREAD_SPECTRUM_INFO *tbl; |
| ATOM_COMMON_TABLE_HEADER *header; |
| uint32_t table_size; |
| uint32_t i; |
| uint32_t number = 0; |
| uint32_t id_local = SS_ID_UNKNOWN; |
| struct atom_data_revision revision; |
| |
| /* SS_Info table exist */ |
| if (!DATA_TABLES(SS_Info)) |
| return number; |
| |
| header = GET_IMAGE(ATOM_COMMON_TABLE_HEADER, |
| DATA_TABLES(SS_Info)); |
| get_atom_data_table_revision(header, &revision); |
| |
| tbl = GET_IMAGE(ATOM_SPREAD_SPECTRUM_INFO, |
| DATA_TABLES(SS_Info)); |
| |
| if (1 != revision.major || 2 > revision.minor) |
| return number; |
| |
| /* have to convert from Internal_SS format to SS_Info format */ |
| switch (id) { |
| case ASIC_INTERNAL_SS_ON_DP: |
| id_local = SS_ID_DP1; |
| break; |
| case ASIC_INTERNAL_SS_ON_LVDS: { |
| struct embedded_panel_info panel_info; |
| |
| if (bios_parser_get_embedded_panel_info(&bp->base, &panel_info) |
| == BP_RESULT_OK) |
| id_local = panel_info.ss_id; |
| break; |
| } |
| default: |
| break; |
| } |
| |
| if (id_local == SS_ID_UNKNOWN) |
| return number; |
| |
| table_size = (le16_to_cpu(tbl->sHeader.usStructureSize) - |
| sizeof(ATOM_COMMON_TABLE_HEADER)) / |
| sizeof(ATOM_SPREAD_SPECTRUM_ASSIGNMENT); |
| |
| for (i = 0; i < table_size; i++) |
| if (id_local == (uint32_t)tbl->asSS_Info[i].ucSS_Id) { |
| number = 1; |
| break; |
| } |
| |
| return number; |
| } |
| |
| /** |
| * get_ss_entry_number |
| * Get spread sprectrum information from the ASIC_InternalSS_Info Ver 2.1 or |
| * SS_Info table from the VBIOS |
| * There can not be more than 1 entry for ASIC_InternalSS_Info Ver 2.1 or |
| * SS_Info. |
| * |
| * @param id, spread sprectrum info index |
| * @return Bios parser result code |
| */ |
| static uint32_t get_ss_entry_number(struct bios_parser *bp, uint32_t id) |
| { |
| if (id == ASIC_INTERNAL_SS_ON_DP || id == ASIC_INTERNAL_SS_ON_LVDS) |
| return get_ss_entry_number_from_ss_info_tbl(bp, id); |
| |
| return get_ss_entry_number_from_internal_ss_info_tbl_v2_1(bp, id); |
| } |
| |
| /** |
| * get_ss_entry_number_from_internal_ss_info_tbl_v2_1 |
| * Get NUmber of spread sprectrum entry from the ASIC_InternalSS_Info table |
| * Ver 2.1 from the VBIOS |
| * There will not be multiple entry for Ver 2.1 |
| * |
| * @param id, spread sprectrum info index |
| * @return number of SS Entry that match the id |
| */ |
| static uint32_t get_ss_entry_number_from_internal_ss_info_tbl_v2_1( |
| struct bios_parser *bp, |
| uint32_t id) |
| { |
| ATOM_ASIC_INTERNAL_SS_INFO_V2 *header_include; |
| ATOM_ASIC_SS_ASSIGNMENT_V2 *tbl; |
| uint32_t size; |
| uint32_t i; |
| |
| if (!DATA_TABLES(ASIC_InternalSS_Info)) |
| return 0; |
| |
| header_include = GET_IMAGE(ATOM_ASIC_INTERNAL_SS_INFO_V2, |
| DATA_TABLES(ASIC_InternalSS_Info)); |
| |
| size = (le16_to_cpu(header_include->sHeader.usStructureSize) |
| - sizeof(ATOM_COMMON_TABLE_HEADER)) |
| / sizeof(ATOM_ASIC_SS_ASSIGNMENT_V2); |
| |
| tbl = (ATOM_ASIC_SS_ASSIGNMENT_V2 *) |
| &header_include->asSpreadSpectrum[0]; |
| for (i = 0; i < size; i++) |
| if (tbl[i].ucClockIndication == (uint8_t)id) |
| return 1; |
| |
| return 0; |
| } |
| /** |
| * get_ss_entry_number_from_internal_ss_info_table_V3_1 |
| * Get Number of SpreadSpectrum Entry from the ASIC_InternalSS_Info table of |
| * the VBIOS that matches id |
| * |
| * @param[in] id, spread sprectrum id |
| * @return number of SS Entry that match the id |
| */ |
| static uint32_t get_ss_entry_number_from_internal_ss_info_tbl_V3_1( |
| struct bios_parser *bp, |
| uint32_t id) |
| { |
| uint32_t number = 0; |
| ATOM_ASIC_INTERNAL_SS_INFO_V3 *header_include; |
| ATOM_ASIC_SS_ASSIGNMENT_V3 *tbl; |
| uint32_t size; |
| uint32_t i; |
| |
| if (!DATA_TABLES(ASIC_InternalSS_Info)) |
| return number; |
| |
| header_include = GET_IMAGE(ATOM_ASIC_INTERNAL_SS_INFO_V3, |
| DATA_TABLES(ASIC_InternalSS_Info)); |
| size = (le16_to_cpu(header_include->sHeader.usStructureSize) - |
| sizeof(ATOM_COMMON_TABLE_HEADER)) / |
| sizeof(ATOM_ASIC_SS_ASSIGNMENT_V3); |
| |
| tbl = (ATOM_ASIC_SS_ASSIGNMENT_V3 *) |
| &header_include->asSpreadSpectrum[0]; |
| |
| for (i = 0; i < size; i++) |
| if (tbl[i].ucClockIndication == (uint8_t)id) |
| number++; |
| |
| return number; |
| } |
| |
| /** |
| * bios_parser_get_gpio_pin_info |
| * Get GpioPin information of input gpio id |
| * |
| * @param gpio_id, GPIO ID |
| * @param info, GpioPin information structure |
| * @return Bios parser result code |
| * @note |
| * to get the GPIO PIN INFO, we need: |
| * 1. get the GPIO_ID from other object table, see GetHPDInfo() |
| * 2. in DATA_TABLE.GPIO_Pin_LUT, search all records, to get the registerA |
| * offset/mask |
| */ |
| static enum bp_result bios_parser_get_gpio_pin_info( |
| struct dc_bios *dcb, |
| uint32_t gpio_id, |
| struct gpio_pin_info *info) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| ATOM_GPIO_PIN_LUT *header; |
| uint32_t count = 0; |
| uint32_t i = 0; |
| |
| if (!DATA_TABLES(GPIO_Pin_LUT)) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| header = GET_IMAGE(ATOM_GPIO_PIN_LUT, DATA_TABLES(GPIO_Pin_LUT)); |
| if (!header) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| if (sizeof(ATOM_COMMON_TABLE_HEADER) + sizeof(ATOM_GPIO_PIN_LUT) |
| > le16_to_cpu(header->sHeader.usStructureSize)) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| if (1 != header->sHeader.ucTableContentRevision) |
| return BP_RESULT_UNSUPPORTED; |
| |
| count = (le16_to_cpu(header->sHeader.usStructureSize) |
| - sizeof(ATOM_COMMON_TABLE_HEADER)) |
| / sizeof(ATOM_GPIO_PIN_ASSIGNMENT); |
| for (i = 0; i < count; ++i) { |
| if (header->asGPIO_Pin[i].ucGPIO_ID != gpio_id) |
| continue; |
| |
| info->offset = |
| (uint32_t) le16_to_cpu(header->asGPIO_Pin[i].usGpioPin_AIndex); |
| info->offset_y = info->offset + 2; |
| info->offset_en = info->offset + 1; |
| info->offset_mask = info->offset - 1; |
| |
| info->mask = (uint32_t) (1 << |
| header->asGPIO_Pin[i].ucGpioPinBitShift); |
| info->mask_y = info->mask + 2; |
| info->mask_en = info->mask + 1; |
| info->mask_mask = info->mask - 1; |
| |
| return BP_RESULT_OK; |
| } |
| |
| return BP_RESULT_NORECORD; |
| } |
| |
| static enum bp_result get_gpio_i2c_info(struct bios_parser *bp, |
| ATOM_I2C_RECORD *record, |
| struct graphics_object_i2c_info *info) |
| { |
| ATOM_GPIO_I2C_INFO *header; |
| uint32_t count = 0; |
| |
| if (!info) |
| return BP_RESULT_BADINPUT; |
| |
| /* get the GPIO_I2C info */ |
| if (!DATA_TABLES(GPIO_I2C_Info)) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| header = GET_IMAGE(ATOM_GPIO_I2C_INFO, DATA_TABLES(GPIO_I2C_Info)); |
| if (!header) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| if (sizeof(ATOM_COMMON_TABLE_HEADER) + sizeof(ATOM_GPIO_I2C_ASSIGMENT) |
| > le16_to_cpu(header->sHeader.usStructureSize)) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| if (1 != header->sHeader.ucTableContentRevision) |
| return BP_RESULT_UNSUPPORTED; |
| |
| /* get data count */ |
| count = (le16_to_cpu(header->sHeader.usStructureSize) |
| - sizeof(ATOM_COMMON_TABLE_HEADER)) |
| / sizeof(ATOM_GPIO_I2C_ASSIGMENT); |
| if (count < record->sucI2cId.bfI2C_LineMux) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| /* get the GPIO_I2C_INFO */ |
| info->i2c_hw_assist = record->sucI2cId.bfHW_Capable; |
| info->i2c_line = record->sucI2cId.bfI2C_LineMux; |
| info->i2c_engine_id = record->sucI2cId.bfHW_EngineID; |
| info->i2c_slave_address = record->ucI2CAddr; |
| |
| info->gpio_info.clk_mask_register_index = |
| le16_to_cpu(header->asGPIO_Info[info->i2c_line].usClkMaskRegisterIndex); |
| info->gpio_info.clk_en_register_index = |
| le16_to_cpu(header->asGPIO_Info[info->i2c_line].usClkEnRegisterIndex); |
| info->gpio_info.clk_y_register_index = |
| le16_to_cpu(header->asGPIO_Info[info->i2c_line].usClkY_RegisterIndex); |
| info->gpio_info.clk_a_register_index = |
| le16_to_cpu(header->asGPIO_Info[info->i2c_line].usClkA_RegisterIndex); |
| info->gpio_info.data_mask_register_index = |
| le16_to_cpu(header->asGPIO_Info[info->i2c_line].usDataMaskRegisterIndex); |
| info->gpio_info.data_en_register_index = |
| le16_to_cpu(header->asGPIO_Info[info->i2c_line].usDataEnRegisterIndex); |
| info->gpio_info.data_y_register_index = |
| le16_to_cpu(header->asGPIO_Info[info->i2c_line].usDataY_RegisterIndex); |
| info->gpio_info.data_a_register_index = |
| le16_to_cpu(header->asGPIO_Info[info->i2c_line].usDataA_RegisterIndex); |
| |
| info->gpio_info.clk_mask_shift = |
| header->asGPIO_Info[info->i2c_line].ucClkMaskShift; |
| info->gpio_info.clk_en_shift = |
| header->asGPIO_Info[info->i2c_line].ucClkEnShift; |
| info->gpio_info.clk_y_shift = |
| header->asGPIO_Info[info->i2c_line].ucClkY_Shift; |
| info->gpio_info.clk_a_shift = |
| header->asGPIO_Info[info->i2c_line].ucClkA_Shift; |
| info->gpio_info.data_mask_shift = |
| header->asGPIO_Info[info->i2c_line].ucDataMaskShift; |
| info->gpio_info.data_en_shift = |
| header->asGPIO_Info[info->i2c_line].ucDataEnShift; |
| info->gpio_info.data_y_shift = |
| header->asGPIO_Info[info->i2c_line].ucDataY_Shift; |
| info->gpio_info.data_a_shift = |
| header->asGPIO_Info[info->i2c_line].ucDataA_Shift; |
| |
| return BP_RESULT_OK; |
| } |
| |
| static ATOM_OBJECT *get_bios_object(struct bios_parser *bp, |
| struct graphics_object_id id) |
| { |
| uint32_t offset; |
| ATOM_OBJECT_TABLE *tbl; |
| uint32_t i; |
| |
| switch (id.type) { |
| case OBJECT_TYPE_ENCODER: |
| offset = le16_to_cpu(bp->object_info_tbl.v1_1->usEncoderObjectTableOffset); |
| break; |
| |
| case OBJECT_TYPE_CONNECTOR: |
| offset = le16_to_cpu(bp->object_info_tbl.v1_1->usConnectorObjectTableOffset); |
| break; |
| |
| case OBJECT_TYPE_ROUTER: |
| offset = le16_to_cpu(bp->object_info_tbl.v1_1->usRouterObjectTableOffset); |
| break; |
| |
| case OBJECT_TYPE_GENERIC: |
| if (bp->object_info_tbl.revision.minor < 3) |
| return NULL; |
| offset = le16_to_cpu(bp->object_info_tbl.v1_3->usMiscObjectTableOffset); |
| break; |
| |
| default: |
| return NULL; |
| } |
| |
| offset += bp->object_info_tbl_offset; |
| |
| tbl = GET_IMAGE(ATOM_OBJECT_TABLE, offset); |
| if (!tbl) |
| return NULL; |
| |
| for (i = 0; i < tbl->ucNumberOfObjects; i++) |
| if (dal_graphics_object_id_is_equal(id, |
| object_id_from_bios_object_id( |
| le16_to_cpu(tbl->asObjects[i].usObjectID)))) |
| return &tbl->asObjects[i]; |
| |
| return NULL; |
| } |
| |
| static uint32_t get_dest_obj_list(struct bios_parser *bp, |
| ATOM_OBJECT *object, uint16_t **id_list) |
| { |
| uint32_t offset; |
| uint8_t *number; |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); /* Invalid object id */ |
| return 0; |
| } |
| |
| offset = le16_to_cpu(object->usSrcDstTableOffset) |
| + bp->object_info_tbl_offset; |
| |
| number = GET_IMAGE(uint8_t, offset); |
| if (!number) |
| return 0; |
| |
| offset += sizeof(uint8_t); |
| offset += sizeof(uint16_t) * (*number); |
| |
| number = GET_IMAGE(uint8_t, offset); |
| if ((!number) || (!*number)) |
| return 0; |
| |
| offset += sizeof(uint8_t); |
| *id_list = (uint16_t *)bios_get_image(&bp->base, offset, *number * sizeof(uint16_t)); |
| |
| if (!*id_list) |
| return 0; |
| |
| return *number; |
| } |
| |
| static uint32_t get_src_obj_list(struct bios_parser *bp, ATOM_OBJECT *object, |
| uint16_t **id_list) |
| { |
| uint32_t offset; |
| uint8_t *number; |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); /* Invalid object id */ |
| return 0; |
| } |
| |
| offset = le16_to_cpu(object->usSrcDstTableOffset) |
| + bp->object_info_tbl_offset; |
| |
| number = GET_IMAGE(uint8_t, offset); |
| if (!number) |
| return 0; |
| |
| offset += sizeof(uint8_t); |
| *id_list = (uint16_t *)bios_get_image(&bp->base, offset, *number * sizeof(uint16_t)); |
| |
| if (!*id_list) |
| return 0; |
| |
| return *number; |
| } |
| |
| static uint32_t get_dst_number_from_object(struct bios_parser *bp, |
| ATOM_OBJECT *object) |
| { |
| uint32_t offset; |
| uint8_t *number; |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); /* Invalid encoder object id*/ |
| return 0; |
| } |
| |
| offset = le16_to_cpu(object->usSrcDstTableOffset) |
| + bp->object_info_tbl_offset; |
| |
| number = GET_IMAGE(uint8_t, offset); |
| if (!number) |
| return 0; |
| |
| offset += sizeof(uint8_t); |
| offset += sizeof(uint16_t) * (*number); |
| |
| number = GET_IMAGE(uint8_t, offset); |
| |
| if (!number) |
| return 0; |
| |
| return *number; |
| } |
| |
| static struct device_id device_type_from_device_id(uint16_t device_id) |
| { |
| |
| struct device_id result_device_id; |
| |
| switch (device_id) { |
| case ATOM_DEVICE_LCD1_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_LCD; |
| result_device_id.enum_id = 1; |
| break; |
| |
| case ATOM_DEVICE_LCD2_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_LCD; |
| result_device_id.enum_id = 2; |
| break; |
| |
| case ATOM_DEVICE_CRT1_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_CRT; |
| result_device_id.enum_id = 1; |
| break; |
| |
| case ATOM_DEVICE_CRT2_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_CRT; |
| result_device_id.enum_id = 2; |
| break; |
| |
| case ATOM_DEVICE_DFP1_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_DFP; |
| result_device_id.enum_id = 1; |
| break; |
| |
| case ATOM_DEVICE_DFP2_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_DFP; |
| result_device_id.enum_id = 2; |
| break; |
| |
| case ATOM_DEVICE_DFP3_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_DFP; |
| result_device_id.enum_id = 3; |
| break; |
| |
| case ATOM_DEVICE_DFP4_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_DFP; |
| result_device_id.enum_id = 4; |
| break; |
| |
| case ATOM_DEVICE_DFP5_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_DFP; |
| result_device_id.enum_id = 5; |
| break; |
| |
| case ATOM_DEVICE_DFP6_SUPPORT: |
| result_device_id.device_type = DEVICE_TYPE_DFP; |
| result_device_id.enum_id = 6; |
| break; |
| |
| default: |
| BREAK_TO_DEBUGGER(); /* Invalid device Id */ |
| result_device_id.device_type = DEVICE_TYPE_UNKNOWN; |
| result_device_id.enum_id = 0; |
| } |
| return result_device_id; |
| } |
| |
| static void get_atom_data_table_revision( |
| ATOM_COMMON_TABLE_HEADER *atom_data_tbl, |
| struct atom_data_revision *tbl_revision) |
| { |
| if (!tbl_revision) |
| return; |
| |
| /* initialize the revision to 0 which is invalid revision */ |
| tbl_revision->major = 0; |
| tbl_revision->minor = 0; |
| |
| if (!atom_data_tbl) |
| return; |
| |
| tbl_revision->major = |
| (uint32_t) GET_DATA_TABLE_MAJOR_REVISION(atom_data_tbl); |
| tbl_revision->minor = |
| (uint32_t) GET_DATA_TABLE_MINOR_REVISION(atom_data_tbl); |
| } |
| |
| static uint32_t signal_to_ss_id(enum as_signal_type signal) |
| { |
| uint32_t clk_id_ss = 0; |
| |
| switch (signal) { |
| case AS_SIGNAL_TYPE_DVI: |
| clk_id_ss = ASIC_INTERNAL_SS_ON_TMDS; |
| break; |
| case AS_SIGNAL_TYPE_HDMI: |
| clk_id_ss = ASIC_INTERNAL_SS_ON_HDMI; |
| break; |
| case AS_SIGNAL_TYPE_LVDS: |
| clk_id_ss = ASIC_INTERNAL_SS_ON_LVDS; |
| break; |
| case AS_SIGNAL_TYPE_DISPLAY_PORT: |
| clk_id_ss = ASIC_INTERNAL_SS_ON_DP; |
| break; |
| case AS_SIGNAL_TYPE_GPU_PLL: |
| clk_id_ss = ASIC_INTERNAL_GPUPLL_SS; |
| break; |
| default: |
| break; |
| } |
| return clk_id_ss; |
| } |
| |
| static uint32_t get_support_mask_for_device_id(struct device_id device_id) |
| { |
| enum dal_device_type device_type = device_id.device_type; |
| uint32_t enum_id = device_id.enum_id; |
| |
| switch (device_type) { |
| case DEVICE_TYPE_LCD: |
| switch (enum_id) { |
| case 1: |
| return ATOM_DEVICE_LCD1_SUPPORT; |
| case 2: |
| return ATOM_DEVICE_LCD2_SUPPORT; |
| default: |
| break; |
| } |
| break; |
| case DEVICE_TYPE_CRT: |
| switch (enum_id) { |
| case 1: |
| return ATOM_DEVICE_CRT1_SUPPORT; |
| case 2: |
| return ATOM_DEVICE_CRT2_SUPPORT; |
| default: |
| break; |
| } |
| break; |
| case DEVICE_TYPE_DFP: |
| switch (enum_id) { |
| case 1: |
| return ATOM_DEVICE_DFP1_SUPPORT; |
| case 2: |
| return ATOM_DEVICE_DFP2_SUPPORT; |
| case 3: |
| return ATOM_DEVICE_DFP3_SUPPORT; |
| case 4: |
| return ATOM_DEVICE_DFP4_SUPPORT; |
| case 5: |
| return ATOM_DEVICE_DFP5_SUPPORT; |
| case 6: |
| return ATOM_DEVICE_DFP6_SUPPORT; |
| default: |
| break; |
| } |
| break; |
| case DEVICE_TYPE_CV: |
| switch (enum_id) { |
| case 1: |
| return ATOM_DEVICE_CV_SUPPORT; |
| default: |
| break; |
| } |
| break; |
| case DEVICE_TYPE_TV: |
| switch (enum_id) { |
| case 1: |
| return ATOM_DEVICE_TV1_SUPPORT; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| }; |
| |
| /* Unidentified device ID, return empty support mask. */ |
| return 0; |
| } |
| |
| /** |
| * HwContext interface for writing MM registers |
| */ |
| |
| static bool i2c_read( |
| struct bios_parser *bp, |
| struct graphics_object_i2c_info *i2c_info, |
| uint8_t *buffer, |
| uint32_t length) |
| { |
| struct ddc *ddc; |
| uint8_t offset[2] = { 0, 0 }; |
| bool result = false; |
| struct i2c_command cmd; |
| struct gpio_ddc_hw_info hw_info = { |
| i2c_info->i2c_hw_assist, |
| i2c_info->i2c_line }; |
| |
| ddc = dal_gpio_create_ddc(bp->base.ctx->gpio_service, |
| i2c_info->gpio_info.clk_a_register_index, |
| (1 << i2c_info->gpio_info.clk_a_shift), &hw_info); |
| |
| if (!ddc) |
| return result; |
| |
| /*Using SW engine */ |
| cmd.engine = I2C_COMMAND_ENGINE_SW; |
| cmd.speed = ddc->ctx->dc->caps.i2c_speed_in_khz; |
| |
| { |
| struct i2c_payload payloads[] = { |
| { |
| .address = i2c_info->i2c_slave_address >> 1, |
| .data = offset, |
| .length = sizeof(offset), |
| .write = true |
| }, |
| { |
| .address = i2c_info->i2c_slave_address >> 1, |
| .data = buffer, |
| .length = length, |
| .write = false |
| } |
| }; |
| |
| cmd.payloads = payloads; |
| cmd.number_of_payloads = ARRAY_SIZE(payloads); |
| |
| /* TODO route this through drm i2c_adapter */ |
| result = dal_i2caux_submit_i2c_command( |
| ddc->ctx->i2caux, |
| ddc, |
| &cmd); |
| } |
| |
| dal_gpio_destroy_ddc(&ddc); |
| |
| return result; |
| } |
| |
| /** |
| * Read external display connection info table through i2c. |
| * validate the GUID and checksum. |
| * |
| * @return enum bp_result whether all data was sucessfully read |
| */ |
| static enum bp_result get_ext_display_connection_info( |
| struct bios_parser *bp, |
| ATOM_OBJECT *opm_object, |
| ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO *ext_display_connection_info_tbl) |
| { |
| bool config_tbl_present = false; |
| ATOM_I2C_RECORD *i2c_record = NULL; |
| uint32_t i = 0; |
| |
| if (opm_object == NULL) |
| return BP_RESULT_BADINPUT; |
| |
| i2c_record = get_i2c_record(bp, opm_object); |
| |
| if (i2c_record != NULL) { |
| ATOM_GPIO_I2C_INFO *gpio_i2c_header; |
| struct graphics_object_i2c_info i2c_info; |
| |
| gpio_i2c_header = GET_IMAGE(ATOM_GPIO_I2C_INFO, |
| bp->master_data_tbl->ListOfDataTables.GPIO_I2C_Info); |
| |
| if (NULL == gpio_i2c_header) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| if (get_gpio_i2c_info(bp, i2c_record, &i2c_info) != |
| BP_RESULT_OK) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| if (i2c_read(bp, |
| &i2c_info, |
| (uint8_t *)ext_display_connection_info_tbl, |
| sizeof(ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO))) { |
| config_tbl_present = true; |
| } |
| } |
| |
| /* Validate GUID */ |
| if (config_tbl_present) |
| for (i = 0; i < NUMBER_OF_UCHAR_FOR_GUID; i++) { |
| if (ext_display_connection_info_tbl->ucGuid[i] |
| != ext_display_connection_guid[i]) { |
| config_tbl_present = false; |
| break; |
| } |
| } |
| |
| /* Validate checksum */ |
| if (config_tbl_present) { |
| uint8_t check_sum = 0; |
| uint8_t *buf = |
| (uint8_t *)ext_display_connection_info_tbl; |
| |
| for (i = 0; i < sizeof(ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO); |
| i++) { |
| check_sum += buf[i]; |
| } |
| |
| if (check_sum != 0) |
| config_tbl_present = false; |
| } |
| |
| if (config_tbl_present) |
| return BP_RESULT_OK; |
| else |
| return BP_RESULT_FAILURE; |
| } |
| |
| /* |
| * Gets the first device ID in the same group as the given ID for enumerating. |
| * For instance, if any DFP device ID is passed, returns the device ID for DFP1. |
| * |
| * The first device ID in the same group as the passed device ID, or 0 if no |
| * matching device group found. |
| */ |
| static uint32_t enum_first_device_id(uint32_t dev_id) |
| { |
| /* Return the first in the group that this ID belongs to. */ |
| if (dev_id & ATOM_DEVICE_CRT_SUPPORT) |
| return ATOM_DEVICE_CRT1_SUPPORT; |
| else if (dev_id & ATOM_DEVICE_DFP_SUPPORT) |
| return ATOM_DEVICE_DFP1_SUPPORT; |
| else if (dev_id & ATOM_DEVICE_LCD_SUPPORT) |
| return ATOM_DEVICE_LCD1_SUPPORT; |
| else if (dev_id & ATOM_DEVICE_TV_SUPPORT) |
| return ATOM_DEVICE_TV1_SUPPORT; |
| else if (dev_id & ATOM_DEVICE_CV_SUPPORT) |
| return ATOM_DEVICE_CV_SUPPORT; |
| |
| /* No group found for this device ID. */ |
| |
| dm_error("%s: incorrect input %d\n", __func__, dev_id); |
| /* No matching support flag for given device ID */ |
| return 0; |
| } |
| |
| /* |
| * Gets the next device ID in the group for a given device ID. |
| * |
| * The current device ID being enumerated on. |
| * |
| * The next device ID in the group, or 0 if no device exists. |
| */ |
| static uint32_t enum_next_dev_id(uint32_t dev_id) |
| { |
| /* Get next device ID in the group. */ |
| switch (dev_id) { |
| case ATOM_DEVICE_CRT1_SUPPORT: |
| return ATOM_DEVICE_CRT2_SUPPORT; |
| case ATOM_DEVICE_LCD1_SUPPORT: |
| return ATOM_DEVICE_LCD2_SUPPORT; |
| case ATOM_DEVICE_DFP1_SUPPORT: |
| return ATOM_DEVICE_DFP2_SUPPORT; |
| case ATOM_DEVICE_DFP2_SUPPORT: |
| return ATOM_DEVICE_DFP3_SUPPORT; |
| case ATOM_DEVICE_DFP3_SUPPORT: |
| return ATOM_DEVICE_DFP4_SUPPORT; |
| case ATOM_DEVICE_DFP4_SUPPORT: |
| return ATOM_DEVICE_DFP5_SUPPORT; |
| case ATOM_DEVICE_DFP5_SUPPORT: |
| return ATOM_DEVICE_DFP6_SUPPORT; |
| } |
| |
| /* Done enumerating through devices. */ |
| return 0; |
| } |
| |
| /* |
| * Returns the new device tag record for patched BIOS object. |
| * |
| * [IN] pExtDisplayPath - External display path to copy device tag from. |
| * [IN] deviceSupport - Bit vector for device ID support flags. |
| * [OUT] pDeviceTag - Device tag structure to fill with patched data. |
| * |
| * True if a compatible device ID was found, false otherwise. |
| */ |
| static bool get_patched_device_tag( |
| struct bios_parser *bp, |
| EXT_DISPLAY_PATH *ext_display_path, |
| uint32_t device_support, |
| ATOM_CONNECTOR_DEVICE_TAG *device_tag) |
| { |
| uint32_t dev_id; |
| /* Use fallback behaviour if not supported. */ |
| if (!bp->remap_device_tags) { |
| device_tag->ulACPIDeviceEnum = |
| cpu_to_le32((uint32_t) le16_to_cpu(ext_display_path->usDeviceACPIEnum)); |
| device_tag->usDeviceID = |
| cpu_to_le16(le16_to_cpu(ext_display_path->usDeviceTag)); |
| return true; |
| } |
| |
| /* Find the first unused in the same group. */ |
| dev_id = enum_first_device_id(le16_to_cpu(ext_display_path->usDeviceTag)); |
| while (dev_id != 0) { |
| /* Assign this device ID if supported. */ |
| if ((device_support & dev_id) != 0) { |
| device_tag->ulACPIDeviceEnum = |
| cpu_to_le32((uint32_t) le16_to_cpu(ext_display_path->usDeviceACPIEnum)); |
| device_tag->usDeviceID = cpu_to_le16((USHORT) dev_id); |
| return true; |
| } |
| |
| dev_id = enum_next_dev_id(dev_id); |
| } |
| |
| /* No compatible device ID found. */ |
| return false; |
| } |
| |
| /* |
| * Adds a device tag to a BIOS object's device tag record if there is |
| * matching device ID supported. |
| * |
| * pObject - Pointer to the BIOS object to add the device tag to. |
| * pExtDisplayPath - Display path to retrieve base device ID from. |
| * pDeviceSupport - Pointer to bit vector for supported device IDs. |
| */ |
| static void add_device_tag_from_ext_display_path( |
| struct bios_parser *bp, |
| ATOM_OBJECT *object, |
| EXT_DISPLAY_PATH *ext_display_path, |
| uint32_t *device_support) |
| { |
| /* Get device tag record for object. */ |
| ATOM_CONNECTOR_DEVICE_TAG *device_tag = NULL; |
| ATOM_CONNECTOR_DEVICE_TAG_RECORD *device_tag_record = NULL; |
| enum bp_result result = |
| bios_parser_get_device_tag_record( |
| bp, object, &device_tag_record); |
| |
| if ((le16_to_cpu(ext_display_path->usDeviceTag) != CONNECTOR_OBJECT_ID_NONE) |
| && (result == BP_RESULT_OK)) { |
| uint8_t index; |
| |
| if ((device_tag_record->ucNumberOfDevice == 1) && |
| (le16_to_cpu(device_tag_record->asDeviceTag[0].usDeviceID) == 0)) { |
| /*Workaround bug in current VBIOS releases where |
| * ucNumberOfDevice = 1 but there is no actual device |
| * tag data. This w/a is temporary until the updated |
| * VBIOS is distributed. */ |
| device_tag_record->ucNumberOfDevice = |
| device_tag_record->ucNumberOfDevice - 1; |
| } |
| |
| /* Attempt to find a matching device ID. */ |
| index = device_tag_record->ucNumberOfDevice; |
| device_tag = &device_tag_record->asDeviceTag[index]; |
| if (get_patched_device_tag( |
| bp, |
| ext_display_path, |
| *device_support, |
| device_tag)) { |
| /* Update cached device support to remove assigned ID. |
| */ |
| *device_support &= ~le16_to_cpu(device_tag->usDeviceID); |
| device_tag_record->ucNumberOfDevice++; |
| } |
| } |
| } |
| |
| /* |
| * Read out a single EXT_DISPLAY_PATH from the external display connection info |
| * table. The specific entry in the table is determined by the enum_id passed |
| * in. |
| * |
| * EXT_DISPLAY_PATH describing a single Configuration table entry |
| */ |
| |
| #define INVALID_CONNECTOR 0xffff |
| |
| static EXT_DISPLAY_PATH *get_ext_display_path_entry( |
| ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO *config_table, |
| uint32_t bios_object_id) |
| { |
| EXT_DISPLAY_PATH *ext_display_path; |
| uint32_t ext_display_path_index = |
| ((bios_object_id & ENUM_ID_MASK) >> ENUM_ID_SHIFT) - 1; |
| |
| if (ext_display_path_index >= MAX_NUMBER_OF_EXT_DISPLAY_PATH) |
| return NULL; |
| |
| ext_display_path = &config_table->sPath[ext_display_path_index]; |
| |
| if (le16_to_cpu(ext_display_path->usDeviceConnector) == INVALID_CONNECTOR) |
| ext_display_path->usDeviceConnector = cpu_to_le16(0); |
| |
| return ext_display_path; |
| } |
| |
| /* |
| * Get AUX/DDC information of input object id |
| * |
| * search all records to find the ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE record |
| * IR |
| */ |
| static ATOM_CONNECTOR_AUXDDC_LUT_RECORD *get_ext_connector_aux_ddc_lut_record( |
| struct bios_parser *bp, |
| ATOM_OBJECT *object) |
| { |
| uint32_t offset; |
| ATOM_COMMON_RECORD_HEADER *header; |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); |
| /* Invalid object */ |
| return NULL; |
| } |
| |
| offset = le16_to_cpu(object->usRecordOffset) |
| + bp->object_info_tbl_offset; |
| |
| for (;;) { |
| header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, offset); |
| |
| if (!header) |
| return NULL; |
| |
| if (LAST_RECORD_TYPE == header->ucRecordType || |
| 0 == header->ucRecordSize) |
| break; |
| |
| if (ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE == |
| header->ucRecordType && |
| sizeof(ATOM_CONNECTOR_AUXDDC_LUT_RECORD) <= |
| header->ucRecordSize) |
| return (ATOM_CONNECTOR_AUXDDC_LUT_RECORD *)(header); |
| |
| offset += header->ucRecordSize; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * Get AUX/DDC information of input object id |
| * |
| * search all records to find the ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE record |
| * IR |
| */ |
| static ATOM_CONNECTOR_HPDPIN_LUT_RECORD *get_ext_connector_hpd_pin_lut_record( |
| struct bios_parser *bp, |
| ATOM_OBJECT *object) |
| { |
| uint32_t offset; |
| ATOM_COMMON_RECORD_HEADER *header; |
| |
| if (!object) { |
| BREAK_TO_DEBUGGER(); |
| /* Invalid object */ |
| return NULL; |
| } |
| |
| offset = le16_to_cpu(object->usRecordOffset) |
| + bp->object_info_tbl_offset; |
| |
| for (;;) { |
| header = GET_IMAGE(ATOM_COMMON_RECORD_HEADER, offset); |
| |
| if (!header) |
| return NULL; |
| |
| if (LAST_RECORD_TYPE == header->ucRecordType || |
| 0 == header->ucRecordSize) |
| break; |
| |
| if (ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE == |
| header->ucRecordType && |
| sizeof(ATOM_CONNECTOR_HPDPIN_LUT_RECORD) <= |
| header->ucRecordSize) |
| return (ATOM_CONNECTOR_HPDPIN_LUT_RECORD *)header; |
| |
| offset += header->ucRecordSize; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * Check whether we need to patch the VBIOS connector info table with |
| * data from an external display connection info table. This is |
| * necessary to support MXM boards with an OPM (output personality |
| * module). With these designs, the VBIOS connector info table |
| * specifies an MXM_CONNECTOR with a unique ID. The driver retrieves |
| * the external connection info table through i2c and then looks up the |
| * connector ID to find the real connector type (e.g. DFP1). |
| * |
| */ |
| static enum bp_result patch_bios_image_from_ext_display_connection_info( |
| struct bios_parser *bp) |
| { |
| ATOM_OBJECT_TABLE *connector_tbl; |
| uint32_t connector_tbl_offset; |
| struct graphics_object_id object_id; |
| ATOM_OBJECT *object; |
| ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO ext_display_connection_info_tbl; |
| EXT_DISPLAY_PATH *ext_display_path; |
| ATOM_CONNECTOR_AUXDDC_LUT_RECORD *aux_ddc_lut_record = NULL; |
| ATOM_I2C_RECORD *i2c_record = NULL; |
| ATOM_CONNECTOR_HPDPIN_LUT_RECORD *hpd_pin_lut_record = NULL; |
| ATOM_HPD_INT_RECORD *hpd_record = NULL; |
| ATOM_OBJECT_TABLE *encoder_table; |
| uint32_t encoder_table_offset; |
| ATOM_OBJECT *opm_object = NULL; |
| uint32_t i = 0; |
| struct graphics_object_id opm_object_id = |
| dal_graphics_object_id_init( |
| GENERIC_ID_MXM_OPM, |
| ENUM_ID_1, |
| OBJECT_TYPE_GENERIC); |
| ATOM_CONNECTOR_DEVICE_TAG_RECORD *dev_tag_record; |
| uint32_t cached_device_support = |
| le16_to_cpu(bp->object_info_tbl.v1_1->usDeviceSupport); |
| |
| uint32_t dst_number; |
| uint16_t *dst_object_id_list; |
| |
| opm_object = get_bios_object(bp, opm_object_id); |
| if (!opm_object) |
| return BP_RESULT_UNSUPPORTED; |
| |
| memset(&ext_display_connection_info_tbl, 0, |
| sizeof(ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO)); |
| |
| connector_tbl_offset = bp->object_info_tbl_offset |
| + le16_to_cpu(bp->object_info_tbl.v1_1->usConnectorObjectTableOffset); |
| connector_tbl = GET_IMAGE(ATOM_OBJECT_TABLE, connector_tbl_offset); |
| |
| /* Read Connector info table from EEPROM through i2c */ |
| if (get_ext_display_connection_info(bp, |
| opm_object, |
| &ext_display_connection_info_tbl) != BP_RESULT_OK) { |
| |
| dm_logger_write(bp->base.ctx->logger, LOG_WARNING, |
| "%s: Failed to read Connection Info Table", __func__); |
| return BP_RESULT_UNSUPPORTED; |
| } |
| |
| /* Get pointer to AUX/DDC and HPD LUTs */ |
| aux_ddc_lut_record = |
| get_ext_connector_aux_ddc_lut_record(bp, opm_object); |
| hpd_pin_lut_record = |
| get_ext_connector_hpd_pin_lut_record(bp, opm_object); |
| |
| if ((aux_ddc_lut_record == NULL) || (hpd_pin_lut_record == NULL)) |
| return BP_RESULT_UNSUPPORTED; |
| |
| /* Cache support bits for currently unmapped device types. */ |
| if (bp->remap_device_tags) { |
| for (i = 0; i < connector_tbl->ucNumberOfObjects; ++i) { |
| uint32_t j; |
| /* Remove support for all non-MXM connectors. */ |
| object = &connector_tbl->asObjects[i]; |
| object_id = object_id_from_bios_object_id( |
| le16_to_cpu(object->usObjectID)); |
| if ((OBJECT_TYPE_CONNECTOR != object_id.type) || |
| (CONNECTOR_ID_MXM == object_id.id)) |
| continue; |
| |
| /* Remove support for all device tags. */ |
| if (bios_parser_get_device_tag_record( |
| bp, object, &dev_tag_record) != BP_RESULT_OK) |
| continue; |
| |
| for (j = 0; j < dev_tag_record->ucNumberOfDevice; ++j) { |
| ATOM_CONNECTOR_DEVICE_TAG *device_tag = |
| &dev_tag_record->asDeviceTag[j]; |
| cached_device_support &= |
| ~le16_to_cpu(device_tag->usDeviceID); |
| } |
| } |
| } |
| |
| /* Find all MXM connector objects and patch them with connector info |
| * from the external display connection info table. */ |
| for (i = 0; i < connector_tbl->ucNumberOfObjects; i++) { |
| uint32_t j; |
| |
| object = &connector_tbl->asObjects[i]; |
| object_id = object_id_from_bios_object_id(le16_to_cpu(object->usObjectID)); |
| if ((OBJECT_TYPE_CONNECTOR != object_id.type) || |
| (CONNECTOR_ID_MXM != object_id.id)) |
| continue; |
| |
| /* Get the correct connection info table entry based on the enum |
| * id. */ |
| ext_display_path = get_ext_display_path_entry( |
| &ext_display_connection_info_tbl, |
| le16_to_cpu(object->usObjectID)); |
| if (!ext_display_path) |
| return BP_RESULT_FAILURE; |
| |
| /* Patch device connector ID */ |
| object->usObjectID = |
| cpu_to_le16(le16_to_cpu(ext_display_path->usDeviceConnector)); |
| |
| /* Patch device tag, ulACPIDeviceEnum. */ |
| add_device_tag_from_ext_display_path( |
| bp, |
| object, |
| ext_display_path, |
| &cached_device_support); |
| |
| /* Patch HPD info */ |
| if (ext_display_path->ucExtHPDPINLutIndex < |
| MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES) { |
| hpd_record = get_hpd_record(bp, object); |
| if (hpd_record) { |
| uint8_t index = |
| ext_display_path->ucExtHPDPINLutIndex; |
| hpd_record->ucHPDIntGPIOID = |
| hpd_pin_lut_record->ucHPDPINMap[index]; |
| } else { |
| BREAK_TO_DEBUGGER(); |
| /* Invalid hpd record */ |
| return BP_RESULT_FAILURE; |
| } |
| } |
| |
| /* Patch I2C/AUX info */ |
| if (ext_display_path->ucExtHPDPINLutIndex < |
| MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES) { |
| i2c_record = get_i2c_record(bp, object); |
| if (i2c_record) { |
| uint8_t index = |
| ext_display_path->ucExtAUXDDCLutIndex; |
| i2c_record->sucI2cId = |
| aux_ddc_lut_record->ucAUXDDCMap[index]; |
| } else { |
| BREAK_TO_DEBUGGER(); |
| /* Invalid I2C record */ |
| return BP_RESULT_FAILURE; |
| } |
| } |
| |
| /* Merge with other MXM connectors that map to the same physical |
| * connector. */ |
| for (j = i + 1; |
| j < connector_tbl->ucNumberOfObjects; j++) { |
| ATOM_OBJECT *next_object; |
| struct graphics_object_id next_object_id; |
| EXT_DISPLAY_PATH *next_ext_display_path; |
| |
| next_object = &connector_tbl->asObjects[j]; |
| next_object_id = object_id_from_bios_object_id( |
| le16_to_cpu(next_object->usObjectID)); |
| |
| if ((OBJECT_TYPE_CONNECTOR != next_object_id.type) && |
| (CONNECTOR_ID_MXM == next_object_id.id)) |
| continue; |
| |
| next_ext_display_path = get_ext_display_path_entry( |
| &ext_display_connection_info_tbl, |
| le16_to_cpu(next_object->usObjectID)); |
| |
| if (next_ext_display_path == NULL) |
| return BP_RESULT_FAILURE; |
| |
| /* Merge if using same connector. */ |
| if ((le16_to_cpu(next_ext_display_path->usDeviceConnector) == |
| le16_to_cpu(ext_display_path->usDeviceConnector)) && |
| (le16_to_cpu(ext_display_path->usDeviceConnector) != 0)) { |
| /* Clear duplicate connector from table. */ |
| next_object->usObjectID = cpu_to_le16(0); |
| add_device_tag_from_ext_display_path( |
| bp, |
| object, |
| ext_display_path, |
| &cached_device_support); |
| } |
| } |
| } |
| |
| /* Find all encoders which have an MXM object as their destination. |
| * Replace the MXM object with the real connector Id from the external |
| * display connection info table */ |
| |
| encoder_table_offset = bp->object_info_tbl_offset |
| + le16_to_cpu(bp->object_info_tbl.v1_1->usEncoderObjectTableOffset); |
| encoder_table = GET_IMAGE(ATOM_OBJECT_TABLE, encoder_table_offset); |
| |
| for (i = 0; i < encoder_table->ucNumberOfObjects; i++) { |
| uint32_t j; |
| |
| object = &encoder_table->asObjects[i]; |
| |
| dst_number = get_dest_obj_list(bp, object, &dst_object_id_list); |
| |
| for (j = 0; j < dst_number; j++) { |
| object_id = object_id_from_bios_object_id( |
| dst_object_id_list[j]); |
| |
| if ((OBJECT_TYPE_CONNECTOR != object_id.type) || |
| (CONNECTOR_ID_MXM != object_id.id)) |
| continue; |
| |
| /* Get the correct connection info table entry based on |
| * the enum id. */ |
| ext_display_path = |
| get_ext_display_path_entry( |
| &ext_display_connection_info_tbl, |
| dst_object_id_list[j]); |
| |
| if (ext_display_path == NULL) |
| return BP_RESULT_FAILURE; |
| |
| dst_object_id_list[j] = |
| le16_to_cpu(ext_display_path->usDeviceConnector); |
| } |
| } |
| |
| return BP_RESULT_OK; |
| } |
| |
| /* |
| * Check whether we need to patch the VBIOS connector info table with |
| * data from an external display connection info table. This is |
| * necessary to support MXM boards with an OPM (output personality |
| * module). With these designs, the VBIOS connector info table |
| * specifies an MXM_CONNECTOR with a unique ID. The driver retrieves |
| * the external connection info table through i2c and then looks up the |
| * connector ID to find the real connector type (e.g. DFP1). |
| * |
| */ |
| |
| static void process_ext_display_connection_info(struct bios_parser *bp) |
| { |
| ATOM_OBJECT_TABLE *connector_tbl; |
| uint32_t connector_tbl_offset; |
| struct graphics_object_id object_id; |
| ATOM_OBJECT *object; |
| bool mxm_connector_found = false; |
| bool null_entry_found = false; |
| uint32_t i = 0; |
| |
| connector_tbl_offset = bp->object_info_tbl_offset + |
| le16_to_cpu(bp->object_info_tbl.v1_1->usConnectorObjectTableOffset); |
| connector_tbl = GET_IMAGE(ATOM_OBJECT_TABLE, connector_tbl_offset); |
| |
| /* Look for MXM connectors to determine whether we need patch the VBIOS |
| * connector info table. Look for null entries to determine whether we |
| * need to compact connector table. */ |
| for (i = 0; i < connector_tbl->ucNumberOfObjects; i++) { |
| object = &connector_tbl->asObjects[i]; |
| object_id = object_id_from_bios_object_id(le16_to_cpu(object->usObjectID)); |
| |
| if ((OBJECT_TYPE_CONNECTOR == object_id.type) && |
| (CONNECTOR_ID_MXM == object_id.id)) { |
| /* Once we found MXM connector - we can break */ |
| mxm_connector_found = true; |
| break; |
| } else if (OBJECT_TYPE_CONNECTOR != object_id.type) { |
| /* We need to continue looping - to check if MXM |
| * connector present */ |
| null_entry_found = true; |
| } |
| } |
| |
| /* Patch BIOS image */ |
| if (mxm_connector_found || null_entry_found) { |
| uint32_t connectors_num = 0; |
| uint8_t *original_bios; |
| /* Step 1: Replace bios image with the new copy which will be |
| * patched */ |
| bp->base.bios_local_image = kzalloc(bp->base.bios_size, |
| GFP_KERNEL); |
| if (bp->base.bios_local_image == NULL) { |
| BREAK_TO_DEBUGGER(); |
| /* Failed to alloc bp->base.bios_local_image */ |
| return; |
| } |
| |
| memmove(bp->base.bios_local_image, bp->base.bios, bp->base.bios_size); |
| original_bios = bp->base.bios; |
| bp->base.bios = bp->base.bios_local_image; |
| connector_tbl = |
| GET_IMAGE(ATOM_OBJECT_TABLE, connector_tbl_offset); |
| |
| /* Step 2: (only if MXM connector found) Patch BIOS image with |
| * info from external module */ |
| if (mxm_connector_found && |
| patch_bios_image_from_ext_display_connection_info(bp) != |
| BP_RESULT_OK) { |
| /* Patching the bios image has failed. We will copy |
| * again original image provided and afterwards |
| * only remove null entries */ |
| memmove( |
| bp->base.bios_local_image, |
| original_bios, |
| bp->base.bios_size); |
| } |
| |
| /* Step 3: Compact connector table (remove null entries, valid |
| * entries moved to beginning) */ |
| for (i = 0; i < connector_tbl->ucNumberOfObjects; i++) { |
| object = &connector_tbl->asObjects[i]; |
| object_id = object_id_from_bios_object_id( |
| le16_to_cpu(object->usObjectID)); |
| |
| if (OBJECT_TYPE_CONNECTOR != object_id.type) |
| continue; |
| |
| if (i != connectors_num) { |
| memmove( |
| &connector_tbl-> |
| asObjects[connectors_num], |
| object, |
| sizeof(ATOM_OBJECT)); |
| } |
| ++connectors_num; |
| } |
| connector_tbl->ucNumberOfObjects = (uint8_t)connectors_num; |
| } |
| } |
| |
| static void bios_parser_post_init(struct dc_bios *dcb) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| |
| process_ext_display_connection_info(bp); |
| } |
| |
| /** |
| * bios_parser_set_scratch_critical_state |
| * |
| * @brief |
| * update critical state bit in VBIOS scratch register |
| * |
| * @param |
| * bool - to set or reset state |
| */ |
| static void bios_parser_set_scratch_critical_state( |
| struct dc_bios *dcb, |
| bool state) |
| { |
| bios_set_scratch_critical_state(dcb, state); |
| } |
| |
| /* |
| * get_integrated_info_v8 |
| * |
| * @brief |
| * Get V8 integrated BIOS information |
| * |
| * @param |
| * bios_parser *bp - [in]BIOS parser handler to get master data table |
| * integrated_info *info - [out] store and output integrated info |
| * |
| * @return |
| * enum bp_result - BP_RESULT_OK if information is available, |
| * BP_RESULT_BADBIOSTABLE otherwise. |
| */ |
| static enum bp_result get_integrated_info_v8( |
| struct bios_parser *bp, |
| struct integrated_info *info) |
| { |
| ATOM_INTEGRATED_SYSTEM_INFO_V1_8 *info_v8; |
| uint32_t i; |
| |
| info_v8 = GET_IMAGE(ATOM_INTEGRATED_SYSTEM_INFO_V1_8, |
| bp->master_data_tbl->ListOfDataTables.IntegratedSystemInfo); |
| |
| if (info_v8 == NULL) |
| return BP_RESULT_BADBIOSTABLE; |
| info->boot_up_engine_clock = le32_to_cpu(info_v8->ulBootUpEngineClock) * 10; |
| info->dentist_vco_freq = le32_to_cpu(info_v8->ulDentistVCOFreq) * 10; |
| info->boot_up_uma_clock = le32_to_cpu(info_v8->ulBootUpUMAClock) * 10; |
| |
| for (i = 0; i < NUMBER_OF_DISP_CLK_VOLTAGE; ++i) { |
| /* Convert [10KHz] into [KHz] */ |
| info->disp_clk_voltage[i].max_supported_clk = |
| le32_to_cpu(info_v8->sDISPCLK_Voltage[i]. |
| ulMaximumSupportedCLK) * 10; |
| info->disp_clk_voltage[i].voltage_index = |
| le32_to_cpu(info_v8->sDISPCLK_Voltage[i].ulVoltageIndex); |
| } |
| |
| info->boot_up_req_display_vector = |
| le32_to_cpu(info_v8->ulBootUpReqDisplayVector); |
| info->gpu_cap_info = |
| le32_to_cpu(info_v8->ulGPUCapInfo); |
| |
| /* |
| * system_config: Bit[0] = 0 : PCIE power gating disabled |
| * = 1 : PCIE power gating enabled |
| * Bit[1] = 0 : DDR-PLL shut down disabled |
| * = 1 : DDR-PLL shut down enabled |
| * Bit[2] = 0 : DDR-PLL power down disabled |
| * = 1 : DDR-PLL power down enabled |
| */ |
| info->system_config = le32_to_cpu(info_v8->ulSystemConfig); |
| info->cpu_cap_info = le32_to_cpu(info_v8->ulCPUCapInfo); |
| info->boot_up_nb_voltage = |
| le16_to_cpu(info_v8->usBootUpNBVoltage); |
| info->ext_disp_conn_info_offset = |
| le16_to_cpu(info_v8->usExtDispConnInfoOffset); |
| info->memory_type = info_v8->ucMemoryType; |
| info->ma_channel_number = info_v8->ucUMAChannelNumber; |
| info->gmc_restore_reset_time = |
| le32_to_cpu(info_v8->ulGMCRestoreResetTime); |
| |
| info->minimum_n_clk = |
| le32_to_cpu(info_v8->ulNbpStateNClkFreq[0]); |
| for (i = 1; i < 4; ++i) |
| info->minimum_n_clk = |
| info->minimum_n_clk < le32_to_cpu(info_v8->ulNbpStateNClkFreq[i]) ? |
| info->minimum_n_clk : le32_to_cpu(info_v8->ulNbpStateNClkFreq[i]); |
| |
| info->idle_n_clk = le32_to_cpu(info_v8->ulIdleNClk); |
| info->ddr_dll_power_up_time = |
| le32_to_cpu(info_v8->ulDDR_DLL_PowerUpTime); |
| info->ddr_pll_power_up_time = |
| le32_to_cpu(info_v8->ulDDR_PLL_PowerUpTime); |
| info->pcie_clk_ss_type = le16_to_cpu(info_v8->usPCIEClkSSType); |
| info->lvds_ss_percentage = |
| le16_to_cpu(info_v8->usLvdsSSPercentage); |
| info->lvds_sspread_rate_in_10hz = |
| le16_to_cpu(info_v8->usLvdsSSpreadRateIn10Hz); |
| info->hdmi_ss_percentage = |
| le16_to_cpu(info_v8->usHDMISSPercentage); |
| info->hdmi_sspread_rate_in_10hz = |
| le16_to_cpu(info_v8->usHDMISSpreadRateIn10Hz); |
| info->dvi_ss_percentage = |
| le16_to_cpu(info_v8->usDVISSPercentage); |
| info->dvi_sspread_rate_in_10_hz = |
| le16_to_cpu(info_v8->usDVISSpreadRateIn10Hz); |
| |
| info->max_lvds_pclk_freq_in_single_link = |
| le16_to_cpu(info_v8->usMaxLVDSPclkFreqInSingleLink); |
| info->lvds_misc = info_v8->ucLvdsMisc; |
| info->lvds_pwr_on_seq_dig_on_to_de_in_4ms = |
| info_v8->ucLVDSPwrOnSeqDIGONtoDE_in4Ms; |
| info->lvds_pwr_on_seq_de_to_vary_bl_in_4ms = |
| info_v8->ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; |
| info->lvds_pwr_on_seq_vary_bl_to_blon_in_4ms = |
| info_v8->ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; |
| info->lvds_pwr_off_seq_vary_bl_to_de_in4ms = |
| info_v8->ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; |
| info->lvds_pwr_off_seq_de_to_dig_on_in4ms = |
| info_v8->ucLVDSPwrOffSeqDEtoDIGON_in4Ms; |
| info->lvds_pwr_off_seq_blon_to_vary_bl_in_4ms = |
| info_v8->ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; |
| info->lvds_off_to_on_delay_in_4ms = |
| info_v8->ucLVDSOffToOnDelay_in4Ms; |
| info->lvds_bit_depth_control_val = |
| le32_to_cpu(info_v8->ulLCDBitDepthControlVal); |
| |
| for (i = 0; i < NUMBER_OF_AVAILABLE_SCLK; ++i) { |
| /* Convert [10KHz] into [KHz] */ |
| info->avail_s_clk[i].supported_s_clk = |
| le32_to_cpu(info_v8->sAvail_SCLK[i].ulSupportedSCLK) * 10; |
| info->avail_s_clk[i].voltage_index = |
| le16_to_cpu(info_v8->sAvail_SCLK[i].usVoltageIndex); |
| info->avail_s_clk[i].voltage_id = |
| le16_to_cpu(info_v8->sAvail_SCLK[i].usVoltageID); |
| } |
| |
| for (i = 0; i < NUMBER_OF_UCHAR_FOR_GUID; ++i) { |
| info->ext_disp_conn_info.gu_id[i] = |
| info_v8->sExtDispConnInfo.ucGuid[i]; |
| } |
| |
| for (i = 0; i < MAX_NUMBER_OF_EXT_DISPLAY_PATH; ++i) { |
| info->ext_disp_conn_info.path[i].device_connector_id = |
| object_id_from_bios_object_id( |
| le16_to_cpu(info_v8->sExtDispConnInfo.sPath[i].usDeviceConnector)); |
| |
| info->ext_disp_conn_info.path[i].ext_encoder_obj_id = |
| object_id_from_bios_object_id( |
| le16_to_cpu(info_v8->sExtDispConnInfo.sPath[i].usExtEncoderObjId)); |
| |
| info->ext_disp_conn_info.path[i].device_tag = |
| le16_to_cpu(info_v8->sExtDispConnInfo.sPath[i].usDeviceTag); |
| info->ext_disp_conn_info.path[i].device_acpi_enum = |
| le16_to_cpu(info_v8->sExtDispConnInfo.sPath[i].usDeviceACPIEnum); |
| info->ext_disp_conn_info.path[i].ext_aux_ddc_lut_index = |
| info_v8->sExtDispConnInfo.sPath[i].ucExtAUXDDCLutIndex; |
| info->ext_disp_conn_info.path[i].ext_hpd_pin_lut_index = |
| info_v8->sExtDispConnInfo.sPath[i].ucExtHPDPINLutIndex; |
| info->ext_disp_conn_info.path[i].channel_mapping.raw = |
| info_v8->sExtDispConnInfo.sPath[i].ucChannelMapping; |
| } |
| info->ext_disp_conn_info.checksum = |
| info_v8->sExtDispConnInfo.ucChecksum; |
| |
| return BP_RESULT_OK; |
| } |
| |
| /* |
| * get_integrated_info_v8 |
| * |
| * @brief |
| * Get V8 integrated BIOS information |
| * |
| * @param |
| * bios_parser *bp - [in]BIOS parser handler to get master data table |
| * integrated_info *info - [out] store and output integrated info |
| * |
| * @return |
| * enum bp_result - BP_RESULT_OK if information is available, |
| * BP_RESULT_BADBIOSTABLE otherwise. |
| */ |
| static enum bp_result get_integrated_info_v9( |
| struct bios_parser *bp, |
| struct integrated_info *info) |
| { |
| ATOM_INTEGRATED_SYSTEM_INFO_V1_9 *info_v9; |
| uint32_t i; |
| |
| info_v9 = GET_IMAGE(ATOM_INTEGRATED_SYSTEM_INFO_V1_9, |
| bp->master_data_tbl->ListOfDataTables.IntegratedSystemInfo); |
| |
| if (!info_v9) |
| return BP_RESULT_BADBIOSTABLE; |
| |
| info->boot_up_engine_clock = le32_to_cpu(info_v9->ulBootUpEngineClock) * 10; |
| info->dentist_vco_freq = le32_to_cpu(info_v9->ulDentistVCOFreq) * 10; |
| info->boot_up_uma_clock = le32_to_cpu(info_v9->ulBootUpUMAClock) * 10; |
| |
| for (i = 0; i < NUMBER_OF_DISP_CLK_VOLTAGE; ++i) { |
| /* Convert [10KHz] into [KHz] */ |
| info->disp_clk_voltage[i].max_supported_clk = |
| le32_to_cpu(info_v9->sDISPCLK_Voltage[i].ulMaximumSupportedCLK) * 10; |
| info->disp_clk_voltage[i].voltage_index = |
| le32_to_cpu(info_v9->sDISPCLK_Voltage[i].ulVoltageIndex); |
| } |
| |
| info->boot_up_req_display_vector = |
| le32_to_cpu(info_v9->ulBootUpReqDisplayVector); |
| info->gpu_cap_info = le32_to_cpu(info_v9->ulGPUCapInfo); |
| |
| /* |
| * system_config: Bit[0] = 0 : PCIE power gating disabled |
| * = 1 : PCIE power gating enabled |
| * Bit[1] = 0 : DDR-PLL shut down disabled |
| * = 1 : DDR-PLL shut down enabled |
| * Bit[2] = 0 : DDR-PLL power down disabled |
| * = 1 : DDR-PLL power down enabled |
| */ |
| info->system_config = le32_to_cpu(info_v9->ulSystemConfig); |
| info->cpu_cap_info = le32_to_cpu(info_v9->ulCPUCapInfo); |
| info->boot_up_nb_voltage = le16_to_cpu(info_v9->usBootUpNBVoltage); |
| info->ext_disp_conn_info_offset = le16_to_cpu(info_v9->usExtDispConnInfoOffset); |
| info->memory_type = info_v9->ucMemoryType; |
| info->ma_channel_number = info_v9->ucUMAChannelNumber; |
| info->gmc_restore_reset_time = le32_to_cpu(info_v9->ulGMCRestoreResetTime); |
| |
| info->minimum_n_clk = le32_to_cpu(info_v9->ulNbpStateNClkFreq[0]); |
| for (i = 1; i < 4; ++i) |
| info->minimum_n_clk = |
| info->minimum_n_clk < le32_to_cpu(info_v9->ulNbpStateNClkFreq[i]) ? |
| info->minimum_n_clk : le32_to_cpu(info_v9->ulNbpStateNClkFreq[i]); |
| |
| info->idle_n_clk = le32_to_cpu(info_v9->ulIdleNClk); |
| info->ddr_dll_power_up_time = le32_to_cpu(info_v9->ulDDR_DLL_PowerUpTime); |
| info->ddr_pll_power_up_time = le32_to_cpu(info_v9->ulDDR_PLL_PowerUpTime); |
| info->pcie_clk_ss_type = le16_to_cpu(info_v9->usPCIEClkSSType); |
| info->lvds_ss_percentage = le16_to_cpu(info_v9->usLvdsSSPercentage); |
| info->lvds_sspread_rate_in_10hz = le16_to_cpu(info_v9->usLvdsSSpreadRateIn10Hz); |
| info->hdmi_ss_percentage = le16_to_cpu(info_v9->usHDMISSPercentage); |
| info->hdmi_sspread_rate_in_10hz = le16_to_cpu(info_v9->usHDMISSpreadRateIn10Hz); |
| info->dvi_ss_percentage = le16_to_cpu(info_v9->usDVISSPercentage); |
| info->dvi_sspread_rate_in_10_hz = le16_to_cpu(info_v9->usDVISSpreadRateIn10Hz); |
| |
| info->max_lvds_pclk_freq_in_single_link = |
| le16_to_cpu(info_v9->usMaxLVDSPclkFreqInSingleLink); |
| info->lvds_misc = info_v9->ucLvdsMisc; |
| info->lvds_pwr_on_seq_dig_on_to_de_in_4ms = |
| info_v9->ucLVDSPwrOnSeqDIGONtoDE_in4Ms; |
| info->lvds_pwr_on_seq_de_to_vary_bl_in_4ms = |
| info_v9->ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; |
| info->lvds_pwr_on_seq_vary_bl_to_blon_in_4ms = |
| info_v9->ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; |
| info->lvds_pwr_off_seq_vary_bl_to_de_in4ms = |
| info_v9->ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; |
| info->lvds_pwr_off_seq_de_to_dig_on_in4ms = |
| info_v9->ucLVDSPwrOffSeqDEtoDIGON_in4Ms; |
| info->lvds_pwr_off_seq_blon_to_vary_bl_in_4ms = |
| info_v9->ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; |
| info->lvds_off_to_on_delay_in_4ms = |
| info_v9->ucLVDSOffToOnDelay_in4Ms; |
| info->lvds_bit_depth_control_val = |
| le32_to_cpu(info_v9->ulLCDBitDepthControlVal); |
| |
| for (i = 0; i < NUMBER_OF_AVAILABLE_SCLK; ++i) { |
| /* Convert [10KHz] into [KHz] */ |
| info->avail_s_clk[i].supported_s_clk = |
| le32_to_cpu(info_v9->sAvail_SCLK[i].ulSupportedSCLK) * 10; |
| info->avail_s_clk[i].voltage_index = |
| le16_to_cpu(info_v9->sAvail_SCLK[i].usVoltageIndex); |
| info->avail_s_clk[i].voltage_id = |
| le16_to_cpu(info_v9->sAvail_SCLK[i].usVoltageID); |
| } |
| |
| for (i = 0; i < NUMBER_OF_UCHAR_FOR_GUID; ++i) { |
| info->ext_disp_conn_info.gu_id[i] = |
| info_v9->sExtDispConnInfo.ucGuid[i]; |
| } |
| |
| for (i = 0; i < MAX_NUMBER_OF_EXT_DISPLAY_PATH; ++i) { |
| info->ext_disp_conn_info.path[i].device_connector_id = |
| object_id_from_bios_object_id( |
| le16_to_cpu(info_v9->sExtDispConnInfo.sPath[i].usDeviceConnector)); |
| |
| info->ext_disp_conn_info.path[i].ext_encoder_obj_id = |
| object_id_from_bios_object_id( |
| le16_to_cpu(info_v9->sExtDispConnInfo.sPath[i].usExtEncoderObjId)); |
| |
| info->ext_disp_conn_info.path[i].device_tag = |
| le16_to_cpu(info_v9->sExtDispConnInfo.sPath[i].usDeviceTag); |
| info->ext_disp_conn_info.path[i].device_acpi_enum = |
| le16_to_cpu(info_v9->sExtDispConnInfo.sPath[i].usDeviceACPIEnum); |
| info->ext_disp_conn_info.path[i].ext_aux_ddc_lut_index = |
| info_v9->sExtDispConnInfo.sPath[i].ucExtAUXDDCLutIndex; |
| info->ext_disp_conn_info.path[i].ext_hpd_pin_lut_index = |
| info_v9->sExtDispConnInfo.sPath[i].ucExtHPDPINLutIndex; |
| info->ext_disp_conn_info.path[i].channel_mapping.raw = |
| info_v9->sExtDispConnInfo.sPath[i].ucChannelMapping; |
| } |
| info->ext_disp_conn_info.checksum = |
| info_v9->sExtDispConnInfo.ucChecksum; |
| |
| return BP_RESULT_OK; |
| } |
| |
| /* |
| * construct_integrated_info |
| * |
| * @brief |
| * Get integrated BIOS information based on table revision |
| * |
| * @param |
| * bios_parser *bp - [in]BIOS parser handler to get master data table |
| * integrated_info *info - [out] store and output integrated info |
| * |
| * @return |
| * enum bp_result - BP_RESULT_OK if information is available, |
| * BP_RESULT_BADBIOSTABLE otherwise. |
| */ |
| static enum bp_result construct_integrated_info( |
| struct bios_parser *bp, |
| struct integrated_info *info) |
| { |
| enum bp_result result = BP_RESULT_BADBIOSTABLE; |
| |
| ATOM_COMMON_TABLE_HEADER *header; |
| struct atom_data_revision revision; |
| |
| if (bp->master_data_tbl->ListOfDataTables.IntegratedSystemInfo) { |
| header = GET_IMAGE(ATOM_COMMON_TABLE_HEADER, |
| bp->master_data_tbl->ListOfDataTables.IntegratedSystemInfo); |
| |
| get_atom_data_table_revision(header, &revision); |
| |
| /* Don't need to check major revision as they are all 1 */ |
| switch (revision.minor) { |
| case 8: |
| result = get_integrated_info_v8(bp, info); |
| break; |
| case 9: |
| result = get_integrated_info_v9(bp, info); |
| break; |
| default: |
| return result; |
| |
| } |
| } |
| |
| /* Sort voltage table from low to high*/ |
| if (result == BP_RESULT_OK) { |
| struct clock_voltage_caps temp = {0, 0}; |
| uint32_t i; |
| uint32_t j; |
| |
| for (i = 1; i < NUMBER_OF_DISP_CLK_VOLTAGE; ++i) { |
| for (j = i; j > 0; --j) { |
| if ( |
| info->disp_clk_voltage[j].max_supported_clk < |
| info->disp_clk_voltage[j-1].max_supported_clk) { |
| /* swap j and j - 1*/ |
| temp = info->disp_clk_voltage[j-1]; |
| info->disp_clk_voltage[j-1] = |
| info->disp_clk_voltage[j]; |
| info->disp_clk_voltage[j] = temp; |
| } |
| } |
| } |
| |
| } |
| |
| return result; |
| } |
| |
| static struct integrated_info *bios_parser_create_integrated_info( |
| struct dc_bios *dcb) |
| { |
| struct bios_parser *bp = BP_FROM_DCB(dcb); |
| struct integrated_info *info = NULL; |
| |
| info = kzalloc(sizeof(struct integrated_info), GFP_KERNEL); |
| |
| if (info == NULL) { |
| ASSERT_CRITICAL(0); |
| return NULL; |
| } |
| |
| if (construct_integrated_info(bp, info) == BP_RESULT_OK) |
| return info; |
| |
| kfree(info); |
| |
| return NULL; |
| } |
| |
| /******************************************************************************/ |
| |
| static const struct dc_vbios_funcs vbios_funcs = { |
| .get_connectors_number = bios_parser_get_connectors_number, |
| |
| .get_encoder_id = bios_parser_get_encoder_id, |
| |
| .get_connector_id = bios_parser_get_connector_id, |
| |
| .get_dst_number = bios_parser_get_dst_number, |
| |
| .get_src_obj = bios_parser_get_src_obj, |
| |
| .get_dst_obj = bios_parser_get_dst_obj, |
| |
| .get_i2c_info = bios_parser_get_i2c_info, |
| |
| .get_voltage_ddc_info = bios_parser_get_voltage_ddc_info, |
| |
| .get_thermal_ddc_info = bios_parser_get_thermal_ddc_info, |
| |
| .get_hpd_info = bios_parser_get_hpd_info, |
| |
| .get_device_tag = bios_parser_get_device_tag, |
| |
| .get_firmware_info = bios_parser_get_firmware_info, |
| |
| .get_spread_spectrum_info = bios_parser_get_spread_spectrum_info, |
| |
| .get_ss_entry_number = bios_parser_get_ss_entry_number, |
| |
| .get_embedded_panel_info = bios_parser_get_embedded_panel_info, |
| |
| .get_gpio_pin_info = bios_parser_get_gpio_pin_info, |
| |
| .get_embedded_panel_info = bios_parser_get_embedded_panel_info, |
| |
| .get_gpio_pin_info = bios_parser_get_gpio_pin_info, |
| |
| .get_encoder_cap_info = bios_parser_get_encoder_cap_info, |
| |
| /* bios scratch register communication */ |
| .is_accelerated_mode = bios_is_accelerated_mode, |
| |
| .set_scratch_critical_state = bios_parser_set_scratch_critical_state, |
| |
| .is_device_id_supported = bios_parser_is_device_id_supported, |
| |
| /* COMMANDS */ |
| .encoder_control = bios_parser_encoder_control, |
| |
| .transmitter_control = bios_parser_transmitter_control, |
| |
| .crt_control = bios_parser_crt_control, /* not used in DAL3. keep for now in case we need to support VGA on Bonaire */ |
| |
| .enable_crtc = bios_parser_enable_crtc, |
| |
| .adjust_pixel_clock = bios_parser_adjust_pixel_clock, |
| |
| .set_pixel_clock = bios_parser_set_pixel_clock, |
| |
| .set_dce_clock = bios_parser_set_dce_clock, |
| |
| .enable_spread_spectrum_on_ppll = bios_parser_enable_spread_spectrum_on_ppll, |
| |
| .program_crtc_timing = bios_parser_program_crtc_timing, /* still use. should probably retire and program directly */ |
| |
| .crtc_source_select = bios_parser_crtc_source_select, /* still use. should probably retire and program directly */ |
| |
| .program_display_engine_pll = bios_parser_program_display_engine_pll, |
| |
| .enable_disp_power_gating = bios_parser_enable_disp_power_gating, |
| |
| /* SW init and patch */ |
| .post_init = bios_parser_post_init, /* patch vbios table for mxm module by reading i2c */ |
| |
| .bios_parser_destroy = bios_parser_destroy, |
| }; |
| |
| static bool bios_parser_construct( |
| struct bios_parser *bp, |
| struct bp_init_data *init, |
| enum dce_version dce_version) |
| { |
| uint16_t *rom_header_offset = NULL; |
| ATOM_ROM_HEADER *rom_header = NULL; |
| ATOM_OBJECT_HEADER *object_info_tbl; |
| struct atom_data_revision tbl_rev = {0}; |
| |
| if (!init) |
| return false; |
| |
| if (!init->bios) |
| return false; |
| |
| bp->base.funcs = &vbios_funcs; |
| bp->base.bios = init->bios; |
| bp->base.bios_size = bp->base.bios[BIOS_IMAGE_SIZE_OFFSET] * BIOS_IMAGE_SIZE_UNIT; |
| |
| bp->base.ctx = init->ctx; |
| bp->base.bios_local_image = NULL; |
| |
| rom_header_offset = |
| GET_IMAGE(uint16_t, OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER); |
| |
| if (!rom_header_offset) |
| return false; |
| |
| rom_header = GET_IMAGE(ATOM_ROM_HEADER, *rom_header_offset); |
| |
| if (!rom_header) |
| return false; |
| |
| get_atom_data_table_revision(&rom_header->sHeader, &tbl_rev); |
| if (tbl_rev.major >= 2 && tbl_rev.minor >= 2) |
| return false; |
| |
| bp->master_data_tbl = |
| GET_IMAGE(ATOM_MASTER_DATA_TABLE, |
| rom_header->usMasterDataTableOffset); |
| |
| if (!bp->master_data_tbl) |
| return false; |
| |
| bp->object_info_tbl_offset = DATA_TABLES(Object_Header); |
| |
| if (!bp->object_info_tbl_offset) |
| return false; |
| |
| object_info_tbl = |
| GET_IMAGE(ATOM_OBJECT_HEADER, bp->object_info_tbl_offset); |
| |
| if (!object_info_tbl) |
| return false; |
| |
| get_atom_data_table_revision(&object_info_tbl->sHeader, |
| &bp->object_info_tbl.revision); |
| |
| if (bp->object_info_tbl.revision.major == 1 |
| && bp->object_info_tbl.revision.minor >= 3) { |
| ATOM_OBJECT_HEADER_V3 *tbl_v3; |
| |
| tbl_v3 = GET_IMAGE(ATOM_OBJECT_HEADER_V3, |
| bp->object_info_tbl_offset); |
| if (!tbl_v3) |
| return false; |
| |
| bp->object_info_tbl.v1_3 = tbl_v3; |
| } else if (bp->object_info_tbl.revision.major == 1 |
| && bp->object_info_tbl.revision.minor >= 1) |
| bp->object_info_tbl.v1_1 = object_info_tbl; |
| else |
| return false; |
| |
| dal_bios_parser_init_cmd_tbl(bp); |
| dal_bios_parser_init_cmd_tbl_helper(&bp->cmd_helper, dce_version); |
| |
| bp->base.integrated_info = bios_parser_create_integrated_info(&bp->base); |
| |
| return true; |
| } |
| |
| /******************************************************************************/ |