| #if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) || \ |
| defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_SB1) |
| |
| #define M_CONFIG1_PC (1 << 4) |
| |
| #define M_PERFCTL_EXL (1UL << 0) |
| #define M_PERFCTL_KERNEL (1UL << 1) |
| #define M_PERFCTL_SUPERVISOR (1UL << 2) |
| #define M_PERFCTL_USER (1UL << 3) |
| #define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4) |
| #define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5) |
| #define M_PERFCTL_VPEID(vpe) ((vpe) << 16) |
| #define M_PERFCTL_MT_EN(filter) ((filter) << 20) |
| #define M_TC_EN_ALL M_PERFCTL_MT_EN(0) |
| #define M_TC_EN_VPE M_PERFCTL_MT_EN(1) |
| #define M_TC_EN_TC M_PERFCTL_MT_EN(2) |
| #define M_PERFCTL_TCID(tcid) ((tcid) << 22) |
| #define M_PERFCTL_WIDE (1UL << 30) |
| #define M_PERFCTL_MORE (1UL << 31) |
| |
| #define M_PERFCTL_COUNT_EVENT_WHENEVER (M_PERFCTL_EXL | \ |
| M_PERFCTL_KERNEL | \ |
| M_PERFCTL_USER | \ |
| M_PERFCTL_SUPERVISOR | \ |
| M_PERFCTL_INTERRUPT_ENABLE) |
| |
| #ifdef CONFIG_MIPS_MT_SMP |
| #define M_PERFCTL_CONFIG_MASK 0x3fff801f |
| #else |
| #define M_PERFCTL_CONFIG_MASK 0x1f |
| #endif |
| #define M_PERFCTL_EVENT_MASK 0xfe0 |
| |
| #define M_COUNTER_OVERFLOW (1UL << 31) |
| |
| #ifdef CONFIG_MIPS_MT_SMP |
| static int cpu_has_mipsmt_pertccounters; |
| |
| /* |
| * FIXME: For VSMP, vpe_id() is redefined for Perf-events, because |
| * cpu_data[cpuid].vpe_id reports 0 for _both_ CPUs. |
| */ |
| #if defined(CONFIG_HW_PERF_EVENTS) |
| #define vpe_id() (cpu_has_mipsmt_pertccounters ? \ |
| 0 : smp_processor_id()) |
| #else |
| #define vpe_id() (cpu_has_mipsmt_pertccounters ? \ |
| 0 : cpu_data[smp_processor_id()].vpe_id) |
| #endif |
| |
| /* Copied from op_model_mipsxx.c */ |
| static inline unsigned int vpe_shift(void) |
| { |
| if (num_possible_cpus() > 1) |
| return 1; |
| |
| return 0; |
| } |
| #else /* !CONFIG_MIPS_MT_SMP */ |
| #define vpe_id() 0 |
| |
| static inline unsigned int vpe_shift(void) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_MIPS_MT_SMP */ |
| |
| static inline unsigned int |
| counters_total_to_per_cpu(unsigned int counters) |
| { |
| return counters >> vpe_shift(); |
| } |
| |
| static inline unsigned int |
| counters_per_cpu_to_total(unsigned int counters) |
| { |
| return counters << vpe_shift(); |
| } |
| |
| #define __define_perf_accessors(r, n, np) \ |
| \ |
| static inline unsigned int r_c0_ ## r ## n(void) \ |
| { \ |
| unsigned int cpu = vpe_id(); \ |
| \ |
| switch (cpu) { \ |
| case 0: \ |
| return read_c0_ ## r ## n(); \ |
| case 1: \ |
| return read_c0_ ## r ## np(); \ |
| default: \ |
| BUG(); \ |
| } \ |
| return 0; \ |
| } \ |
| \ |
| static inline void w_c0_ ## r ## n(unsigned int value) \ |
| { \ |
| unsigned int cpu = vpe_id(); \ |
| \ |
| switch (cpu) { \ |
| case 0: \ |
| write_c0_ ## r ## n(value); \ |
| return; \ |
| case 1: \ |
| write_c0_ ## r ## np(value); \ |
| return; \ |
| default: \ |
| BUG(); \ |
| } \ |
| return; \ |
| } \ |
| |
| __define_perf_accessors(perfcntr, 0, 2) |
| __define_perf_accessors(perfcntr, 1, 3) |
| __define_perf_accessors(perfcntr, 2, 0) |
| __define_perf_accessors(perfcntr, 3, 1) |
| |
| __define_perf_accessors(perfctrl, 0, 2) |
| __define_perf_accessors(perfctrl, 1, 3) |
| __define_perf_accessors(perfctrl, 2, 0) |
| __define_perf_accessors(perfctrl, 3, 1) |
| |
| static inline int __n_counters(void) |
| { |
| if (!(read_c0_config1() & M_CONFIG1_PC)) |
| return 0; |
| if (!(read_c0_perfctrl0() & M_PERFCTL_MORE)) |
| return 1; |
| if (!(read_c0_perfctrl1() & M_PERFCTL_MORE)) |
| return 2; |
| if (!(read_c0_perfctrl2() & M_PERFCTL_MORE)) |
| return 3; |
| |
| return 4; |
| } |
| |
| static inline int n_counters(void) |
| { |
| int counters; |
| |
| switch (current_cpu_type()) { |
| case CPU_R10000: |
| counters = 2; |
| break; |
| |
| case CPU_R12000: |
| case CPU_R14000: |
| counters = 4; |
| break; |
| |
| default: |
| counters = __n_counters(); |
| } |
| |
| return counters; |
| } |
| |
| static void reset_counters(void *arg) |
| { |
| int counters = (int)(long)arg; |
| switch (counters) { |
| case 4: |
| w_c0_perfctrl3(0); |
| w_c0_perfcntr3(0); |
| case 3: |
| w_c0_perfctrl2(0); |
| w_c0_perfcntr2(0); |
| case 2: |
| w_c0_perfctrl1(0); |
| w_c0_perfcntr1(0); |
| case 1: |
| w_c0_perfctrl0(0); |
| w_c0_perfcntr0(0); |
| } |
| } |
| |
| static inline u64 |
| mipsxx_pmu_read_counter(unsigned int idx) |
| { |
| switch (idx) { |
| case 0: |
| return r_c0_perfcntr0(); |
| case 1: |
| return r_c0_perfcntr1(); |
| case 2: |
| return r_c0_perfcntr2(); |
| case 3: |
| return r_c0_perfcntr3(); |
| default: |
| WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); |
| return 0; |
| } |
| } |
| |
| static inline void |
| mipsxx_pmu_write_counter(unsigned int idx, u64 val) |
| { |
| switch (idx) { |
| case 0: |
| w_c0_perfcntr0(val); |
| return; |
| case 1: |
| w_c0_perfcntr1(val); |
| return; |
| case 2: |
| w_c0_perfcntr2(val); |
| return; |
| case 3: |
| w_c0_perfcntr3(val); |
| return; |
| } |
| } |
| |
| static inline unsigned int |
| mipsxx_pmu_read_control(unsigned int idx) |
| { |
| switch (idx) { |
| case 0: |
| return r_c0_perfctrl0(); |
| case 1: |
| return r_c0_perfctrl1(); |
| case 2: |
| return r_c0_perfctrl2(); |
| case 3: |
| return r_c0_perfctrl3(); |
| default: |
| WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); |
| return 0; |
| } |
| } |
| |
| static inline void |
| mipsxx_pmu_write_control(unsigned int idx, unsigned int val) |
| { |
| switch (idx) { |
| case 0: |
| w_c0_perfctrl0(val); |
| return; |
| case 1: |
| w_c0_perfctrl1(val); |
| return; |
| case 2: |
| w_c0_perfctrl2(val); |
| return; |
| case 3: |
| w_c0_perfctrl3(val); |
| return; |
| } |
| } |
| |
| #ifdef CONFIG_MIPS_MT_SMP |
| static DEFINE_RWLOCK(pmuint_rwlock); |
| #endif |
| |
| /* 24K/34K/1004K cores can share the same event map. */ |
| static const struct mips_perf_event mipsxxcore_event_map |
| [PERF_COUNT_HW_MAX] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P }, |
| [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T }, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [PERF_COUNT_HW_CACHE_MISSES] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_EVEN, T }, |
| [PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T }, |
| [PERF_COUNT_HW_BUS_CYCLES] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }; |
| |
| /* 74K core has different branch event code. */ |
| static const struct mips_perf_event mipsxx74Kcore_event_map |
| [PERF_COUNT_HW_MAX] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P }, |
| [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T }, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [PERF_COUNT_HW_CACHE_MISSES] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x27, CNTR_EVEN, T }, |
| [PERF_COUNT_HW_BRANCH_MISSES] = { 0x27, CNTR_ODD, T }, |
| [PERF_COUNT_HW_BUS_CYCLES] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }; |
| |
| /* 24K/34K/1004K cores can share the same cache event map. */ |
| static const struct mips_perf_event mipsxxcore_cache_map |
| [PERF_COUNT_HW_CACHE_MAX] |
| [PERF_COUNT_HW_CACHE_OP_MAX] |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { |
| [C(L1D)] = { |
| /* |
| * Like some other architectures (e.g. ARM), the performance |
| * counters don't differentiate between read and write |
| * accesses/misses, so this isn't strictly correct, but it's the |
| * best we can do. Writes and reads get combined. |
| */ |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x0a, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x0b, CNTR_EVEN | CNTR_ODD, T }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x0a, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x0b, CNTR_EVEN | CNTR_ODD, T }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(L1I)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x09, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x09, CNTR_ODD, T }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x09, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x09, CNTR_ODD, T }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { 0x14, CNTR_EVEN, T }, |
| /* |
| * Note that MIPS has only "hit" events countable for |
| * the prefetch operation. |
| */ |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(LL)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x15, CNTR_ODD, P }, |
| [C(RESULT_MISS)] = { 0x16, CNTR_EVEN, P }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x15, CNTR_ODD, P }, |
| [C(RESULT_MISS)] = { 0x16, CNTR_EVEN, P }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(DTLB)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(ITLB)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x05, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x05, CNTR_ODD, T }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x05, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x05, CNTR_ODD, T }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(BPU)] = { |
| /* Using the same code for *HW_BRANCH* */ |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| }; |
| |
| /* 74K core has completely different cache event map. */ |
| static const struct mips_perf_event mipsxx74Kcore_cache_map |
| [PERF_COUNT_HW_CACHE_MAX] |
| [PERF_COUNT_HW_CACHE_OP_MAX] |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { |
| [C(L1D)] = { |
| /* |
| * Like some other architectures (e.g. ARM), the performance |
| * counters don't differentiate between read and write |
| * accesses/misses, so this isn't strictly correct, but it's the |
| * best we can do. Writes and reads get combined. |
| */ |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x17, CNTR_ODD, T }, |
| [C(RESULT_MISS)] = { 0x18, CNTR_ODD, T }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x17, CNTR_ODD, T }, |
| [C(RESULT_MISS)] = { 0x18, CNTR_ODD, T }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(L1I)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { 0x34, CNTR_EVEN, T }, |
| /* |
| * Note that MIPS has only "hit" events countable for |
| * the prefetch operation. |
| */ |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(LL)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P }, |
| [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN | CNTR_ODD, P }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P }, |
| [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN | CNTR_ODD, P }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(DTLB)] = { |
| /* 74K core does not have specific DTLB events. */ |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(ITLB)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x04, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x04, CNTR_ODD, T }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x04, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x04, CNTR_ODD, T }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| [C(BPU)] = { |
| /* Using the same code for *HW_BRANCH* */ |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = { 0x27, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x27, CNTR_ODD, T }, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = { 0x27, CNTR_EVEN, T }, |
| [C(RESULT_MISS)] = { 0x27, CNTR_ODD, T }, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID }, |
| }, |
| }, |
| }; |
| |
| #ifdef CONFIG_MIPS_MT_SMP |
| static void |
| check_and_calc_range(struct perf_event *event, |
| const struct mips_perf_event *pev) |
| { |
| struct hw_perf_event *hwc = &event->hw; |
| |
| if (event->cpu >= 0) { |
| if (pev->range > V) { |
| /* |
| * The user selected an event that is processor |
| * wide, while expecting it to be VPE wide. |
| */ |
| hwc->config_base |= M_TC_EN_ALL; |
| } else { |
| /* |
| * FIXME: cpu_data[event->cpu].vpe_id reports 0 |
| * for both CPUs. |
| */ |
| hwc->config_base |= M_PERFCTL_VPEID(event->cpu); |
| hwc->config_base |= M_TC_EN_VPE; |
| } |
| } else |
| hwc->config_base |= M_TC_EN_ALL; |
| } |
| #else |
| static void |
| check_and_calc_range(struct perf_event *event, |
| const struct mips_perf_event *pev) |
| { |
| } |
| #endif |
| |
| static int __hw_perf_event_init(struct perf_event *event) |
| { |
| struct perf_event_attr *attr = &event->attr; |
| struct hw_perf_event *hwc = &event->hw; |
| const struct mips_perf_event *pev; |
| int err; |
| |
| /* Returning MIPS event descriptor for generic perf event. */ |
| if (PERF_TYPE_HARDWARE == event->attr.type) { |
| if (event->attr.config >= PERF_COUNT_HW_MAX) |
| return -EINVAL; |
| pev = mipspmu_map_general_event(event->attr.config); |
| } else if (PERF_TYPE_HW_CACHE == event->attr.type) { |
| pev = mipspmu_map_cache_event(event->attr.config); |
| } else if (PERF_TYPE_RAW == event->attr.type) { |
| /* We are working on the global raw event. */ |
| mutex_lock(&raw_event_mutex); |
| pev = mipspmu->map_raw_event(event->attr.config); |
| } else { |
| /* The event type is not (yet) supported. */ |
| return -EOPNOTSUPP; |
| } |
| |
| if (IS_ERR(pev)) { |
| if (PERF_TYPE_RAW == event->attr.type) |
| mutex_unlock(&raw_event_mutex); |
| return PTR_ERR(pev); |
| } |
| |
| /* |
| * We allow max flexibility on how each individual counter shared |
| * by the single CPU operates (the mode exclusion and the range). |
| */ |
| hwc->config_base = M_PERFCTL_INTERRUPT_ENABLE; |
| |
| /* Calculate range bits and validate it. */ |
| if (num_possible_cpus() > 1) |
| check_and_calc_range(event, pev); |
| |
| hwc->event_base = mipspmu_perf_event_encode(pev); |
| if (PERF_TYPE_RAW == event->attr.type) |
| mutex_unlock(&raw_event_mutex); |
| |
| if (!attr->exclude_user) |
| hwc->config_base |= M_PERFCTL_USER; |
| if (!attr->exclude_kernel) { |
| hwc->config_base |= M_PERFCTL_KERNEL; |
| /* MIPS kernel mode: KSU == 00b || EXL == 1 || ERL == 1 */ |
| hwc->config_base |= M_PERFCTL_EXL; |
| } |
| if (!attr->exclude_hv) |
| hwc->config_base |= M_PERFCTL_SUPERVISOR; |
| |
| hwc->config_base &= M_PERFCTL_CONFIG_MASK; |
| /* |
| * The event can belong to another cpu. We do not assign a local |
| * counter for it for now. |
| */ |
| hwc->idx = -1; |
| hwc->config = 0; |
| |
| if (!hwc->sample_period) { |
| hwc->sample_period = MAX_PERIOD; |
| hwc->last_period = hwc->sample_period; |
| local64_set(&hwc->period_left, hwc->sample_period); |
| } |
| |
| err = 0; |
| if (event->group_leader != event) { |
| err = validate_group(event); |
| if (err) |
| return -EINVAL; |
| } |
| |
| event->destroy = hw_perf_event_destroy; |
| |
| return err; |
| } |
| |
| static void pause_local_counters(void) |
| { |
| struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); |
| int counters = mipspmu->num_counters; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| switch (counters) { |
| case 4: |
| cpuc->saved_ctrl[3] = r_c0_perfctrl3(); |
| w_c0_perfctrl3(cpuc->saved_ctrl[3] & |
| ~M_PERFCTL_COUNT_EVENT_WHENEVER); |
| case 3: |
| cpuc->saved_ctrl[2] = r_c0_perfctrl2(); |
| w_c0_perfctrl2(cpuc->saved_ctrl[2] & |
| ~M_PERFCTL_COUNT_EVENT_WHENEVER); |
| case 2: |
| cpuc->saved_ctrl[1] = r_c0_perfctrl1(); |
| w_c0_perfctrl1(cpuc->saved_ctrl[1] & |
| ~M_PERFCTL_COUNT_EVENT_WHENEVER); |
| case 1: |
| cpuc->saved_ctrl[0] = r_c0_perfctrl0(); |
| w_c0_perfctrl0(cpuc->saved_ctrl[0] & |
| ~M_PERFCTL_COUNT_EVENT_WHENEVER); |
| } |
| local_irq_restore(flags); |
| } |
| |
| static void resume_local_counters(void) |
| { |
| struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); |
| int counters = mipspmu->num_counters; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| switch (counters) { |
| case 4: |
| w_c0_perfctrl3(cpuc->saved_ctrl[3]); |
| case 3: |
| w_c0_perfctrl2(cpuc->saved_ctrl[2]); |
| case 2: |
| w_c0_perfctrl1(cpuc->saved_ctrl[1]); |
| case 1: |
| w_c0_perfctrl0(cpuc->saved_ctrl[0]); |
| } |
| local_irq_restore(flags); |
| } |
| |
| static int mipsxx_pmu_handle_shared_irq(void) |
| { |
| struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); |
| struct perf_sample_data data; |
| unsigned int counters = mipspmu->num_counters; |
| unsigned int counter; |
| int handled = IRQ_NONE; |
| struct pt_regs *regs; |
| |
| if (cpu_has_mips_r2 && !(read_c0_cause() & (1 << 26))) |
| return handled; |
| |
| /* |
| * First we pause the local counters, so that when we are locked |
| * here, the counters are all paused. When it gets locked due to |
| * perf_disable(), the timer interrupt handler will be delayed. |
| * |
| * See also mipsxx_pmu_start(). |
| */ |
| pause_local_counters(); |
| #ifdef CONFIG_MIPS_MT_SMP |
| read_lock(&pmuint_rwlock); |
| #endif |
| |
| regs = get_irq_regs(); |
| |
| perf_sample_data_init(&data, 0); |
| |
| switch (counters) { |
| #define HANDLE_COUNTER(n) \ |
| case n + 1: \ |
| if (test_bit(n, cpuc->used_mask)) { \ |
| counter = r_c0_perfcntr ## n(); \ |
| if (counter & M_COUNTER_OVERFLOW) { \ |
| w_c0_perfcntr ## n(counter & \ |
| VALID_COUNT); \ |
| if (test_and_change_bit(n, cpuc->msbs)) \ |
| handle_associated_event(cpuc, \ |
| n, &data, regs); \ |
| handled = IRQ_HANDLED; \ |
| } \ |
| } |
| HANDLE_COUNTER(3) |
| HANDLE_COUNTER(2) |
| HANDLE_COUNTER(1) |
| HANDLE_COUNTER(0) |
| } |
| |
| /* |
| * Do all the work for the pending perf events. We can do this |
| * in here because the performance counter interrupt is a regular |
| * interrupt, not NMI. |
| */ |
| if (handled == IRQ_HANDLED) |
| irq_work_run(); |
| |
| #ifdef CONFIG_MIPS_MT_SMP |
| read_unlock(&pmuint_rwlock); |
| #endif |
| resume_local_counters(); |
| return handled; |
| } |
| |
| static irqreturn_t |
| mipsxx_pmu_handle_irq(int irq, void *dev) |
| { |
| return mipsxx_pmu_handle_shared_irq(); |
| } |
| |
| static void mipsxx_pmu_start(void) |
| { |
| #ifdef CONFIG_MIPS_MT_SMP |
| write_unlock(&pmuint_rwlock); |
| #endif |
| resume_local_counters(); |
| } |
| |
| /* |
| * MIPS performance counters can be per-TC. The control registers can |
| * not be directly accessed across CPUs. Hence if we want to do global |
| * control, we need cross CPU calls. on_each_cpu() can help us, but we |
| * can not make sure this function is called with interrupts enabled. So |
| * here we pause local counters and then grab a rwlock and leave the |
| * counters on other CPUs alone. If any counter interrupt raises while |
| * we own the write lock, simply pause local counters on that CPU and |
| * spin in the handler. Also we know we won't be switched to another |
| * CPU after pausing local counters and before grabbing the lock. |
| */ |
| static void mipsxx_pmu_stop(void) |
| { |
| pause_local_counters(); |
| #ifdef CONFIG_MIPS_MT_SMP |
| write_lock(&pmuint_rwlock); |
| #endif |
| } |
| |
| static int |
| mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc, |
| struct hw_perf_event *hwc) |
| { |
| int i; |
| |
| /* |
| * We only need to care the counter mask. The range has been |
| * checked definitely. |
| */ |
| unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff; |
| |
| for (i = mipspmu->num_counters - 1; i >= 0; i--) { |
| /* |
| * Note that some MIPS perf events can be counted by both |
| * even and odd counters, wheresas many other are only by |
| * even _or_ odd counters. This introduces an issue that |
| * when the former kind of event takes the counter the |
| * latter kind of event wants to use, then the "counter |
| * allocation" for the latter event will fail. In fact if |
| * they can be dynamically swapped, they both feel happy. |
| * But here we leave this issue alone for now. |
| */ |
| if (test_bit(i, &cntr_mask) && |
| !test_and_set_bit(i, cpuc->used_mask)) |
| return i; |
| } |
| |
| return -EAGAIN; |
| } |
| |
| static void |
| mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx) |
| { |
| struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); |
| unsigned long flags; |
| |
| WARN_ON(idx < 0 || idx >= mipspmu->num_counters); |
| |
| local_irq_save(flags); |
| cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) | |
| (evt->config_base & M_PERFCTL_CONFIG_MASK) | |
| /* Make sure interrupt enabled. */ |
| M_PERFCTL_INTERRUPT_ENABLE; |
| /* |
| * We do not actually let the counter run. Leave it until start(). |
| */ |
| local_irq_restore(flags); |
| } |
| |
| static void |
| mipsxx_pmu_disable_event(int idx) |
| { |
| struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); |
| unsigned long flags; |
| |
| WARN_ON(idx < 0 || idx >= mipspmu->num_counters); |
| |
| local_irq_save(flags); |
| cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) & |
| ~M_PERFCTL_COUNT_EVENT_WHENEVER; |
| mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]); |
| local_irq_restore(flags); |
| } |
| |
| /* 24K */ |
| #define IS_UNSUPPORTED_24K_EVENT(r, b) \ |
| ((b) == 12 || (r) == 151 || (r) == 152 || (b) == 26 || \ |
| (b) == 27 || (r) == 28 || (r) == 158 || (b) == 31 || \ |
| (b) == 32 || (b) == 34 || (b) == 36 || (r) == 168 || \ |
| (r) == 172 || (b) == 47 || ((b) >= 56 && (b) <= 63) || \ |
| ((b) >= 68 && (b) <= 127)) |
| #define IS_BOTH_COUNTERS_24K_EVENT(b) \ |
| ((b) == 0 || (b) == 1 || (b) == 11) |
| |
| /* 34K */ |
| #define IS_UNSUPPORTED_34K_EVENT(r, b) \ |
| ((b) == 12 || (r) == 27 || (r) == 158 || (b) == 36 || \ |
| (b) == 38 || (r) == 175 || ((b) >= 56 && (b) <= 63) || \ |
| ((b) >= 68 && (b) <= 127)) |
| #define IS_BOTH_COUNTERS_34K_EVENT(b) \ |
| ((b) == 0 || (b) == 1 || (b) == 11) |
| #ifdef CONFIG_MIPS_MT_SMP |
| #define IS_RANGE_P_34K_EVENT(r, b) \ |
| ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \ |
| (b) == 25 || (b) == 39 || (r) == 44 || (r) == 174 || \ |
| (r) == 176 || ((b) >= 50 && (b) <= 55) || \ |
| ((b) >= 64 && (b) <= 67)) |
| #define IS_RANGE_V_34K_EVENT(r) ((r) == 47) |
| #endif |
| |
| /* 74K */ |
| #define IS_UNSUPPORTED_74K_EVENT(r, b) \ |
| ((r) == 5 || ((r) >= 135 && (r) <= 137) || \ |
| ((b) >= 10 && (b) <= 12) || (b) == 22 || (b) == 27 || \ |
| (b) == 33 || (b) == 34 || ((b) >= 47 && (b) <= 49) || \ |
| (r) == 178 || (b) == 55 || (b) == 57 || (b) == 60 || \ |
| (b) == 61 || (r) == 62 || (r) == 191 || \ |
| ((b) >= 64 && (b) <= 127)) |
| #define IS_BOTH_COUNTERS_74K_EVENT(b) \ |
| ((b) == 0 || (b) == 1) |
| |
| /* 1004K */ |
| #define IS_UNSUPPORTED_1004K_EVENT(r, b) \ |
| ((b) == 12 || (r) == 27 || (r) == 158 || (b) == 38 || \ |
| (r) == 175 || (b) == 63 || ((b) >= 68 && (b) <= 127)) |
| #define IS_BOTH_COUNTERS_1004K_EVENT(b) \ |
| ((b) == 0 || (b) == 1 || (b) == 11) |
| #ifdef CONFIG_MIPS_MT_SMP |
| #define IS_RANGE_P_1004K_EVENT(r, b) \ |
| ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \ |
| (b) == 25 || (b) == 36 || (b) == 39 || (r) == 44 || \ |
| (r) == 174 || (r) == 176 || ((b) >= 50 && (b) <= 59) || \ |
| (r) == 188 || (b) == 61 || (b) == 62 || \ |
| ((b) >= 64 && (b) <= 67)) |
| #define IS_RANGE_V_1004K_EVENT(r) ((r) == 47) |
| #endif |
| |
| /* |
| * User can use 0-255 raw events, where 0-127 for the events of even |
| * counters, and 128-255 for odd counters. Note that bit 7 is used to |
| * indicate the parity. So, for example, when user wants to take the |
| * Event Num of 15 for odd counters (by referring to the user manual), |
| * then 128 needs to be added to 15 as the input for the event config, |
| * i.e., 143 (0x8F) to be used. |
| */ |
| static const struct mips_perf_event * |
| mipsxx_pmu_map_raw_event(u64 config) |
| { |
| unsigned int raw_id = config & 0xff; |
| unsigned int base_id = raw_id & 0x7f; |
| |
| switch (current_cpu_type()) { |
| case CPU_24K: |
| if (IS_UNSUPPORTED_24K_EVENT(raw_id, base_id)) |
| return ERR_PTR(-EOPNOTSUPP); |
| raw_event.event_id = base_id; |
| if (IS_BOTH_COUNTERS_24K_EVENT(base_id)) |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; |
| else |
| raw_event.cntr_mask = |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; |
| #ifdef CONFIG_MIPS_MT_SMP |
| /* |
| * This is actually doing nothing. Non-multithreading |
| * CPUs will not check and calculate the range. |
| */ |
| raw_event.range = P; |
| #endif |
| break; |
| case CPU_34K: |
| if (IS_UNSUPPORTED_34K_EVENT(raw_id, base_id)) |
| return ERR_PTR(-EOPNOTSUPP); |
| raw_event.event_id = base_id; |
| if (IS_BOTH_COUNTERS_34K_EVENT(base_id)) |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; |
| else |
| raw_event.cntr_mask = |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; |
| #ifdef CONFIG_MIPS_MT_SMP |
| if (IS_RANGE_P_34K_EVENT(raw_id, base_id)) |
| raw_event.range = P; |
| else if (unlikely(IS_RANGE_V_34K_EVENT(raw_id))) |
| raw_event.range = V; |
| else |
| raw_event.range = T; |
| #endif |
| break; |
| case CPU_74K: |
| if (IS_UNSUPPORTED_74K_EVENT(raw_id, base_id)) |
| return ERR_PTR(-EOPNOTSUPP); |
| raw_event.event_id = base_id; |
| if (IS_BOTH_COUNTERS_74K_EVENT(base_id)) |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; |
| else |
| raw_event.cntr_mask = |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; |
| #ifdef CONFIG_MIPS_MT_SMP |
| raw_event.range = P; |
| #endif |
| break; |
| case CPU_1004K: |
| if (IS_UNSUPPORTED_1004K_EVENT(raw_id, base_id)) |
| return ERR_PTR(-EOPNOTSUPP); |
| raw_event.event_id = base_id; |
| if (IS_BOTH_COUNTERS_1004K_EVENT(base_id)) |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; |
| else |
| raw_event.cntr_mask = |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; |
| #ifdef CONFIG_MIPS_MT_SMP |
| if (IS_RANGE_P_1004K_EVENT(raw_id, base_id)) |
| raw_event.range = P; |
| else if (unlikely(IS_RANGE_V_1004K_EVENT(raw_id))) |
| raw_event.range = V; |
| else |
| raw_event.range = T; |
| #endif |
| break; |
| } |
| |
| return &raw_event; |
| } |
| |
| static struct mips_pmu mipsxxcore_pmu = { |
| .handle_irq = mipsxx_pmu_handle_irq, |
| .handle_shared_irq = mipsxx_pmu_handle_shared_irq, |
| .start = mipsxx_pmu_start, |
| .stop = mipsxx_pmu_stop, |
| .alloc_counter = mipsxx_pmu_alloc_counter, |
| .read_counter = mipsxx_pmu_read_counter, |
| .write_counter = mipsxx_pmu_write_counter, |
| .enable_event = mipsxx_pmu_enable_event, |
| .disable_event = mipsxx_pmu_disable_event, |
| .map_raw_event = mipsxx_pmu_map_raw_event, |
| .general_event_map = &mipsxxcore_event_map, |
| .cache_event_map = &mipsxxcore_cache_map, |
| }; |
| |
| static struct mips_pmu mipsxx74Kcore_pmu = { |
| .handle_irq = mipsxx_pmu_handle_irq, |
| .handle_shared_irq = mipsxx_pmu_handle_shared_irq, |
| .start = mipsxx_pmu_start, |
| .stop = mipsxx_pmu_stop, |
| .alloc_counter = mipsxx_pmu_alloc_counter, |
| .read_counter = mipsxx_pmu_read_counter, |
| .write_counter = mipsxx_pmu_write_counter, |
| .enable_event = mipsxx_pmu_enable_event, |
| .disable_event = mipsxx_pmu_disable_event, |
| .map_raw_event = mipsxx_pmu_map_raw_event, |
| .general_event_map = &mipsxx74Kcore_event_map, |
| .cache_event_map = &mipsxx74Kcore_cache_map, |
| }; |
| |
| static int __init |
| init_hw_perf_events(void) |
| { |
| int counters, irq; |
| |
| pr_info("Performance counters: "); |
| |
| counters = n_counters(); |
| if (counters == 0) { |
| pr_cont("No available PMU.\n"); |
| return -ENODEV; |
| } |
| |
| #ifdef CONFIG_MIPS_MT_SMP |
| cpu_has_mipsmt_pertccounters = read_c0_config7() & (1<<19); |
| if (!cpu_has_mipsmt_pertccounters) |
| counters = counters_total_to_per_cpu(counters); |
| #endif |
| |
| #ifdef MSC01E_INT_BASE |
| if (cpu_has_veic) { |
| /* |
| * Using platform specific interrupt controller defines. |
| */ |
| irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR; |
| } else { |
| #endif |
| if (cp0_perfcount_irq >= 0) |
| irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; |
| else |
| irq = -1; |
| #ifdef MSC01E_INT_BASE |
| } |
| #endif |
| |
| on_each_cpu(reset_counters, (void *)(long)counters, 1); |
| |
| switch (current_cpu_type()) { |
| case CPU_24K: |
| mipsxxcore_pmu.name = "mips/24K"; |
| mipsxxcore_pmu.num_counters = counters; |
| mipsxxcore_pmu.irq = irq; |
| mipspmu = &mipsxxcore_pmu; |
| break; |
| case CPU_34K: |
| mipsxxcore_pmu.name = "mips/34K"; |
| mipsxxcore_pmu.num_counters = counters; |
| mipsxxcore_pmu.irq = irq; |
| mipspmu = &mipsxxcore_pmu; |
| break; |
| case CPU_74K: |
| mipsxx74Kcore_pmu.name = "mips/74K"; |
| mipsxx74Kcore_pmu.num_counters = counters; |
| mipsxx74Kcore_pmu.irq = irq; |
| mipspmu = &mipsxx74Kcore_pmu; |
| break; |
| case CPU_1004K: |
| mipsxxcore_pmu.name = "mips/1004K"; |
| mipsxxcore_pmu.num_counters = counters; |
| mipsxxcore_pmu.irq = irq; |
| mipspmu = &mipsxxcore_pmu; |
| break; |
| default: |
| pr_cont("Either hardware does not support performance " |
| "counters, or not yet implemented.\n"); |
| return -ENODEV; |
| } |
| |
| if (mipspmu) |
| pr_cont("%s PMU enabled, %d counters available to each " |
| "CPU, irq %d%s\n", mipspmu->name, counters, irq, |
| irq < 0 ? " (share with timer interrupt)" : ""); |
| |
| perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW); |
| |
| return 0; |
| } |
| early_initcall(init_hw_perf_events); |
| |
| #endif /* defined(CONFIG_CPU_MIPS32)... */ |