blob: a3a2b71a452309394b2401aa1607a10b8fa1175c [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek Write Direct Memory Access
maintainers:
- Chun-Kuang Hu <chunkuang.hu@kernel.org>
- Philipp Zabel <p.zabel@pengutronix.de>
description: |
Mediatek Write Direct Memory Access(WDMA) component used to write
the data into DMA.
WDMA device node must be siblings to the central MMSYS_CONFIG node.
For a description of the MMSYS_CONFIG binding, see
Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
for details.
properties:
compatible:
oneOf:
- enum:
- mediatek,mt8173-disp-wdma
- items:
- const: mediatek,mt6795-disp-wdma
- const: mediatek,mt8173-disp-wdma
reg:
maxItems: 1
interrupts:
maxItems: 1
power-domains:
description: A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle. See
Documentation/devicetree/bindings/power/power-domain.yaml for details.
clocks:
items:
- description: WDMA Clock
iommus:
description:
This property should point to the respective IOMMU block with master port as argument,
see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
mediatek,gce-client-reg:
description: The register of client driver can be configured by gce with
4 arguments defined in this property, such as phandle of gce, subsys id,
register offset and size. Each GCE subsys id is mapping to a client
defined in the header include/dt-bindings/gce/<chip>-gce.h.
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
required:
- compatible
- reg
- interrupts
- power-domains
- clocks
- iommus
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/power/mt8173-power.h>
#include <dt-bindings/gce/mt8173-gce.h>
#include <dt-bindings/memory/mt8173-larb-port.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
wdma0: wdma@14011000 {
compatible = "mediatek,mt8173-disp-wdma";
reg = <0 0x14011000 0 0x1000>;
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
};
};