blob: 8137618237ce739f827b1230356dc546fafcd39b [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DPU on SC7180
maintainers:
- Krishna Manikandan <quic_mkrishn@quicinc.com>
$ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
enum:
- qcom,sc7180-dpu
- qcom,sm6125-dpu
- qcom,sm6350-dpu
- qcom,sm6375-dpu
reg:
items:
- description: Address offset and size for mdp register set
- description: Address offset and size for vbif register set
reg-names:
items:
- const: mdp
- const: vbif
clocks:
minItems: 6
items:
- description: Display hf axi clock
- description: Display ahb clock
- description: Display rotator clock
- description: Display lut clock
- description: Display core clock
- description: Display vsync clock
- description: Display core throttle clock
clock-names:
minItems: 6
items:
- const: bus
- const: iface
- const: rot
- const: lut
- const: core
- const: vsync
- const: throttle
required:
- compatible
- reg
- reg-names
- clocks
- clock-names
unevaluatedProperties: false
allOf:
- if:
properties:
compatible:
enum:
- qcom,sm6375-dpu
- qcom,sm6125-dpu
then:
properties:
clocks:
minItems: 7
clock-names:
minItems: 7
examples:
- |
#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
#include <dt-bindings/power/qcom-rpmpd.h>
display-controller@ae01000 {
compatible = "qcom,sc7180-dpu";
reg = <0x0ae01000 0x8f000>,
<0x0aeb0000 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_ROT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "bus", "iface", "rot", "lut", "core",
"vsync";
interrupt-parent = <&mdss>;
interrupts = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&mdp_opp_table>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@2 {
reg = <2>;
endpoint {
remote-endpoint = <&dp_in>;
};
};
};
};
...