blob: d6bb553a2c6f0417299315d2f6575545addb6610 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Lightning Mountain centralized DMA controllers.
maintainers:
- chuanhua.lei@intel.com
- mallikarjunax.reddy@intel.com
allOf:
- $ref: dma-controller.yaml#
properties:
compatible:
enum:
- intel,lgm-cdma
- intel,lgm-dma2tx
- intel,lgm-dma1rx
- intel,lgm-dma1tx
- intel,lgm-dma0tx
- intel,lgm-dma3
- intel,lgm-toe-dma30
- intel,lgm-toe-dma31
reg:
maxItems: 1
"#dma-cells":
const: 3
description:
The first cell is the peripheral's DMA request line.
The second cell is the peripheral's (port) number corresponding to the channel.
The third cell is the burst length of the channel.
dma-channels:
minimum: 1
maximum: 16
dma-channel-mask:
maxItems: 1
clocks:
maxItems: 1
resets:
maxItems: 1
reset-names:
items:
- const: ctrl
interrupts:
maxItems: 1
intel,dma-poll-cnt:
$ref: /schemas/types.yaml#/definitions/uint32
description:
DMA descriptor polling counter is used to control the poling mechanism
for the descriptor fetching for all channels.
intel,dma-byte-en:
type: boolean
description:
DMA byte enable is only valid for DMA write(RX).
Byte enable(1) means DMA write will be based on the number of dwords
instead of the whole burst.
intel,dma-drb:
type: boolean
description:
DMA descriptor read back to make sure data and desc synchronization.
intel,dma-dburst-wr:
type: boolean
description:
Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
It only applies to RX DMA and memcopy DMA.
required:
- compatible
- reg
additionalProperties: false
examples:
- |
dma0: dma-controller@e0e00000 {
compatible = "intel,lgm-cdma";
reg = <0xe0e00000 0x1000>;
#dma-cells = <3>;
dma-channels = <16>;
dma-channel-mask = <0xFFFF>;
interrupt-parent = <&ioapic1>;
interrupts = <82 1>;
resets = <&rcu0 0x30 0>;
reset-names = "ctrl";
clocks = <&cgu0 80>;
intel,dma-poll-cnt = <4>;
intel,dma-byte-en;
intel,dma-drb;
};
- |
dma3: dma-controller@ec800000 {
compatible = "intel,lgm-dma3";
reg = <0xec800000 0x1000>;
clocks = <&cgu0 71>;
resets = <&rcu0 0x10 9>;
#dma-cells = <3>;
intel,dma-poll-cnt = <16>;
intel,dma-byte-en;
intel,dma-dburst-wr;
};