| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/iio/adc/qcom,spmi-iadc.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm's SPMI PMIC current ADC |
| |
| maintainers: |
| - Jonathan Cameron <jic23@kernel.org> |
| |
| description: | |
| QPNP PMIC current ADC (IADC) provides interface to clients to read current. |
| A 16 bit ADC is used for current measurements. IADC can measure the current |
| through an external resistor (channel 1) or internal (built-in) resistor |
| (channel 0). When using an external resistor it is to be described by |
| qcom,external-resistor-micro-ohms property. |
| |
| properties: |
| compatible: |
| items: |
| - enum: |
| - qcom,pm8226-iadc |
| - qcom,pm8941-iadc |
| - const: qcom,spmi-iadc |
| |
| reg: |
| description: IADC base address in the SPMI PMIC register map |
| maxItems: 1 |
| |
| qcom,external-resistor-micro-ohms: |
| description: |
| Sensor resistor value. If not defined value of 10000 micro Ohms |
| will be used. |
| |
| interrupts: |
| maxItems: 1 |
| description: |
| End of conversion interrupt. |
| |
| "#io-channel-cells": |
| const: 1 |
| |
| required: |
| - compatible |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| pmic { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| adc@3600 { |
| compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; |
| reg = <0x3600>; |
| interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; |
| qcom,external-resistor-micro-ohms = <10000>; |
| #io-channel-cells = <1>; |
| }; |
| }; |
| ... |
