blob: f1a940a110d2605a6c65e339cdeee988dd176cca [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/ti,cal.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
maintainers:
- Benoit Parrot <bparrot@ti.com>
description: |-
The Camera Adaptation Layer (CAL) is a key component for image capture
applications. The capture module provides the system interface and the
processing capability to connect CSI2 image-sensor modules to the
DRA72x device.
CAL supports 2 camera port nodes on MIPI bus.
properties:
compatible:
enum:
# for DRA72 controllers
- ti,dra72-cal
# for DRA72 controllers pre ES2.0
- ti,dra72-pre-es2-cal
# for DRA76 controllers
- ti,dra76-cal
# for AM654 controllers
- ti,am654-cal
reg:
minItems: 2
items:
- description: The CAL main register region
- description: The RX Core0 (DPHY0) register region
- description: The RX Core1 (DPHY1) register region
reg-names:
minItems: 2
items:
- const: cal_top
- const: cal_rx_core0
- const: cal_rx_core1
interrupts:
maxItems: 1
ti,camerrx-control:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to device control module
- description: offset to the control_camerarx_core register
description:
phandle to the device control module and offset to the
control_camerarx_core register
clocks:
maxItems: 1
clock-names:
const: fck
power-domains:
description:
List of phandle and PM domain specifier as documented in
Documentation/devicetree/bindings/power/power_domain.txt
maxItems: 1
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: 'CSI2 Port #0'
properties:
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
clock-lanes:
maxItems: 1
data-lanes:
minItems: 1
maxItems: 4
port@1:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: 'CSI2 Port #1'
properties:
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
clock-lanes:
maxItems: 1
data-lanes:
minItems: 1
maxItems: 4
required:
- port@0
required:
- compatible
- reg
- reg-names
- interrupts
- ti,camerrx-control
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
cal: cal@4845b000 {
compatible = "ti,dra72-cal";
reg = <0x4845B000 0x400>,
<0x4845B800 0x40>,
<0x4845B900 0x40>;
reg-names = "cal_top",
"cal_rx_core0",
"cal_rx_core1";
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
ti,camerrx-control = <&scm_conf 0xE94>;
ports {
#address-cells = <1>;
#size-cells = <0>;
csi2_0: port@0 {
reg = <0>;
csi2_phy0: endpoint {
remote-endpoint = <&csi2_cam0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
camera-sensor@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
AVDD-supply = <&reg_2p8v>;
DOVDD-supply = <&reg_1p8v>;
DVDD-supply = <&reg_1p5v>;
clocks = <&clk_ov5640_fixed>;
clock-names = "xclk";
port {
csi2_cam0: endpoint {
remote-endpoint = <&csi2_phy0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
...