| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. |
| |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: MediaTek mt76 wireless devices Generic Binding |
| |
| maintainers: |
| - Felix Fietkau <nbd@nbd.name> |
| - Lorenzo Bianconi <lorenzo@kernel.org> |
| - Ryder Lee <ryder.lee@mediatek.com> |
| |
| description: | |
| This node provides properties for configuring the MediaTek mt76xx |
| wireless device. The node is expected to be specified as a child |
| node of the PCI controller to which the wireless chip is connected. |
| Alternatively, it can specify the wireless part of the MT7628/MT7688 |
| or MT7622 SoC. |
| |
| allOf: |
| - $ref: ieee80211.yaml# |
| |
| properties: |
| compatible: |
| enum: |
| - mediatek,mt76 |
| - mediatek,mt7628-wmac |
| - mediatek,mt7622-wmac |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| power-domains: |
| maxItems: 1 |
| |
| mediatek,infracfg: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: |
| Phandle to the infrastructure bus fabric syscon node. |
| This property is MT7622 specific |
| |
| ieee80211-freq-limit: true |
| |
| mediatek,eeprom-data: |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| description: |
| EEPROM data embedded as array. |
| |
| mediatek,mtd-eeprom: |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| description: |
| Phandle to a MTD partition + offset containing EEPROM data |
| |
| big-endian: |
| $ref: /schemas/types.yaml#/definitions/flag |
| description: |
| Specify if the radio eeprom partition is written in big-endian |
| |
| mediatek,eeprom-merge-otp: |
| type: boolean |
| description: |
| Merge EEPROM data with OTP data. Can be used on boards where the flash |
| calibration data is generic and specific calibration data should be |
| pulled from the OTP ROM |
| |
| led: |
| type: object |
| $ref: /schemas/leds/common.yaml# |
| additionalProperties: false |
| properties: |
| led-sources: |
| maxItems: 1 |
| |
| power-limits: |
| type: object |
| additionalProperties: false |
| patternProperties: |
| "^r[0-9]+": |
| type: object |
| additionalProperties: false |
| properties: |
| regdomain: |
| $ref: /schemas/types.yaml#/definitions/string |
| description: |
| Regdomain refers to a legal regulatory region. Different |
| countries define different levels of allowable transmitter |
| power, time that a channel can be occupied, and different |
| available channels |
| enum: |
| - FCC |
| - ETSI |
| - JP |
| |
| patternProperties: |
| "^txpower-[256]g$": |
| type: object |
| additionalProperties: false |
| patternProperties: |
| "^b[0-9]+$": |
| type: object |
| additionalProperties: false |
| properties: |
| channels: |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| minItems: 2 |
| maxItems: 2 |
| description: |
| Pairs of first and last channel number of the selected |
| band |
| |
| rates-cck: |
| $ref: /schemas/types.yaml#/definitions/uint8-array |
| minItems: 4 |
| maxItems: 4 |
| description: |
| 4 half-dBm per-rate power limit values |
| |
| rates-ofdm: |
| $ref: /schemas/types.yaml#/definitions/uint8-array |
| minItems: 8 |
| maxItems: 8 |
| description: |
| 8 half-dBm per-rate power limit values |
| |
| rates-mcs: |
| $ref: /schemas/types.yaml#/definitions/uint8-matrix |
| description: |
| Sets of per-rate power limit values for 802.11n/802.11ac |
| rates for multiple channel bandwidth settings. |
| Each set starts with the number of channel bandwidth |
| settings for which the rate set applies, followed by |
| either 8 or 10 power limit values. The order of the |
| channel bandwidth settings is 20, 40, 80 and 160 MHz. |
| maxItems: 4 |
| items: |
| minItems: 9 |
| maxItems: 11 |
| |
| rates-ru: |
| $ref: /schemas/types.yaml#/definitions/uint8-matrix |
| description: |
| Sets of per-rate power limit values for 802.11ax rates |
| for multiple channel bandwidth or resource unit settings. |
| Each set starts with the number of channel bandwidth or |
| resource unit settings for which the rate set applies, |
| followed by 12 power limit values. The order of the |
| channel resource unit settings is RU26, RU52, RU106, |
| RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160. |
| items: |
| minItems: 13 |
| maxItems: 13 |
| |
| txs-delta: |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| description: |
| Half-dBm power delta for different numbers of antennas |
| |
| required: |
| - compatible |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| pcie0 { |
| #address-cells = <3>; |
| #size-cells = <2>; |
| wifi@0,0 { |
| compatible = "mediatek,mt76"; |
| reg = <0x0000 0 0 0 0>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| mediatek,mtd-eeprom = <&factory 0x8000>; |
| big-endian; |
| |
| led { |
| led-sources = <2>; |
| }; |
| |
| power-limits { |
| r0 { |
| regdomain = "FCC"; |
| txpower-5g { |
| b0 { |
| channels = <36 48>; |
| rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>; |
| rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>, |
| <3 22 22 22 22 22 22 22 22 22 22>; |
| rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>, |
| <4 20 20 20 20 20 20 20 20 20 20 20 20>; |
| }; |
| b1 { |
| channels = <100 181>; |
| rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>; |
| rates-mcs = /bits/ 8 <4 14 14 14 14 14 14 14 14 14 14>; |
| txs-delta = <12 9 6>; |
| rates-ru = /bits/ 8 <7 14 14 14 14 14 14 14 14 14 14 14 14>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| - | |
| wifi@10300000 { |
| compatible = "mediatek,mt7628-wmac"; |
| reg = <0x10300000 0x100000>; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <6>; |
| |
| mediatek,mtd-eeprom = <&factory 0x0>; |
| }; |
| |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| wifi@18000000 { |
| compatible = "mediatek,mt7622-wmac"; |
| reg = <0x10300000 0x100000>; |
| interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>; |
| |
| mediatek,infracfg = <&infracfg>; |
| |
| power-domains = <&scpsys 3>; |
| }; |
