blob: 640411518e4664aae241d9abdc2ea277470c2789 [file] [log] [blame]
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
/*
* rseq-x86.h
*
* (C) Copyright 2016-2018 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
*/
#include <stdint.h>
/*
* RSEQ_SIG is used with the following reserved undefined instructions, which
* trap in user-space:
*
* x86-32: 0f b9 3d 53 30 05 53 ud1 0x53053053,%edi
* x86-64: 0f b9 3d 53 30 05 53 ud1 0x53053053(%rip),%edi
*/
#define RSEQ_SIG 0x53053053
/*
* Due to a compiler optimization bug in gcc-8 with asm goto and TLS asm input
* operands, we cannot use "m" input operands, and rather pass the __rseq_abi
* address through a "r" input operand.
*/
/* Offset of cpu_id and rseq_cs fields in struct rseq. */
#define RSEQ_CPU_ID_OFFSET 4
#define RSEQ_CS_OFFSET 8
#ifdef __x86_64__
#define rseq_smp_mb() \
__asm__ __volatile__ ("lock; addl $0,-128(%%rsp)" ::: "memory", "cc")
#define rseq_smp_rmb() rseq_barrier()
#define rseq_smp_wmb() rseq_barrier()
#define rseq_smp_load_acquire(p) \
__extension__ ({ \
__typeof(*p) ____p1 = RSEQ_READ_ONCE(*p); \
rseq_barrier(); \
____p1; \
})
#define rseq_smp_acquire__after_ctrl_dep() rseq_smp_rmb()
#define rseq_smp_store_release(p, v) \
do { \
rseq_barrier(); \
RSEQ_WRITE_ONCE(*p, v); \
} while (0)
#ifdef RSEQ_SKIP_FASTPATH
#include "rseq-skip.h"
#else /* !RSEQ_SKIP_FASTPATH */
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \
".popsection\n\t" \
".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
".quad " __rseq_str(label) "b\n\t" \
".popsection\n\t"
#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
__RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
(post_commit_ip - start_ip), abort_ip)
/*
* Exit points of a rseq critical section consist of all instructions outside
* of the critical section where a critical section can either branch to or
* reach through the normal course of its execution. The abort IP and the
* post-commit IP are already part of the __rseq_cs section and should not be
* explicitly defined as additional exit points. Knowing all exit points is
* useful to assist debuggers stepping over the critical section.
*/
#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \
".popsection\n\t"
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
RSEQ_INJECT_ASM(1) \
"leaq " __rseq_str(cs_label) "(%%rip), %%rax\n\t" \
"movq %%rax, " __rseq_str(rseq_cs) "\n\t" \
__rseq_str(label) ":\n\t"
#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
RSEQ_INJECT_ASM(2) \
"cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \
"jnz " __rseq_str(label) "\n\t"
#define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \
".pushsection __rseq_failure, \"ax\"\n\t" \
/* Disassembler-friendly signature: ud1 <sig>(%rip),%edi. */ \
".byte 0x0f, 0xb9, 0x3d\n\t" \
".long " __rseq_str(RSEQ_SIG) "\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
"jmp %l[" __rseq_str(abort_label) "]\n\t" \
".popsection\n\t"
#define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \
".pushsection __rseq_failure, \"ax\"\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
"jmp %l[" __rseq_str(cmpfail_label) "]\n\t" \
".popsection\n\t"
static inline __attribute__((always_inline))
int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpq %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
/* final store */
"movq %[newv], %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(5)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
: "memory", "cc", "rax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
/*
* Compare @v against @expectnot. When it does _not_ match, load @v
* into @load, and store the content of *@v + voffp into @v.
*/
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
off_t voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movq %[v], %%rbx\n\t"
"cmpq %%rbx, %[expectnot]\n\t"
"je %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"movq %[v], %%rbx\n\t"
"cmpq %%rbx, %[expectnot]\n\t"
"je %l[error2]\n\t"
#endif
"movq %%rbx, %[load]\n\t"
"addq %[voffp], %%rbx\n\t"
"movq (%%rbx), %%rbx\n\t"
/* final store */
"movq %%rbx, %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(5)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
[voffp] "er" (voffp),
[load] "m" (*load)
: "memory", "cc", "rax", "rbx"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
static inline __attribute__((always_inline))
int rseq_addv(intptr_t *v, intptr_t count, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
#endif
/* final store */
"addq %[count], %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(4)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[count] "er" (count)
: "memory", "cc", "rax"
RSEQ_INJECT_CLOBBER
: abort
#ifdef RSEQ_COMPARE_TWICE
, error1
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
#endif
}
#define RSEQ_ARCH_HAS_OFFSET_DEREF_ADDV
/*
* pval = *(ptr+off)
* *pval += inc;
*/
static inline __attribute__((always_inline))
int rseq_offset_deref_addv(intptr_t *ptr, off_t off, intptr_t inc, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
#endif
/* get p+v */
"movq %[ptr], %%rbx\n\t"
"addq %[off], %%rbx\n\t"
/* get pv */
"movq (%%rbx), %%rcx\n\t"
/* *pv += inc */
"addq %[inc], (%%rcx)\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(4)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* final store input */
[ptr] "m" (*ptr),
[off] "er" (off),
[inc] "er" (inc)
: "memory", "cc", "rax", "rbx", "rcx"
RSEQ_INJECT_CLOBBER
: abort
#ifdef RSEQ_COMPARE_TWICE
, error1
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
#endif
}
static inline __attribute__((always_inline))
int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect,
intptr_t *v2, intptr_t newv2,
intptr_t newv, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpq %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
/* try store */
"movq %[newv2], %[v2]\n\t"
RSEQ_INJECT_ASM(5)
/* final store */
"movq %[newv], %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(6)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
: "memory", "cc", "rax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
/* x86-64 is TSO. */
static inline __attribute__((always_inline))
int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect,
intptr_t *v2, intptr_t newv2,
intptr_t newv, int cpu)
{
return rseq_cmpeqv_trystorev_storev(v, expect, v2, newv2, newv, cpu);
}
static inline __attribute__((always_inline))
int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect,
intptr_t *v2, intptr_t expect2,
intptr_t newv, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
"cmpq %[v2], %[expect2]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(5)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpq %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
"cmpq %[v2], %[expect2]\n\t"
"jnz %l[error3]\n\t"
#endif
/* final store */
"movq %[newv], %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(6)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
: "memory", "cc", "rax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2, error3
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("1st expected value comparison failed");
error3:
rseq_bug("2nd expected value comparison failed");
#endif
}
static inline __attribute__((always_inline))
int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect,
void *dst, void *src, size_t len,
intptr_t newv, int cpu)
{
uint64_t rseq_scratch[3];
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
"movq %[src], %[rseq_scratch0]\n\t"
"movq %[dst], %[rseq_scratch1]\n\t"
"movq %[len], %[rseq_scratch2]\n\t"
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz 5f\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f)
"cmpq %[v], %[expect]\n\t"
"jnz 7f\n\t"
#endif
/* try memcpy */
"test %[len], %[len]\n\t" \
"jz 333f\n\t" \
"222:\n\t" \
"movb (%[src]), %%al\n\t" \
"movb %%al, (%[dst])\n\t" \
"inc %[src]\n\t" \
"inc %[dst]\n\t" \
"dec %[len]\n\t" \
"jnz 222b\n\t" \
"333:\n\t" \
RSEQ_INJECT_ASM(5)
/* final store */
"movq %[newv], %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(6)
/* teardown */
"movq %[rseq_scratch2], %[len]\n\t"
"movq %[rseq_scratch1], %[dst]\n\t"
"movq %[rseq_scratch0], %[src]\n\t"
RSEQ_ASM_DEFINE_ABORT(4,
"movq %[rseq_scratch2], %[len]\n\t"
"movq %[rseq_scratch1], %[dst]\n\t"
"movq %[rseq_scratch0], %[src]\n\t",
abort)
RSEQ_ASM_DEFINE_CMPFAIL(5,
"movq %[rseq_scratch2], %[len]\n\t"
"movq %[rseq_scratch1], %[dst]\n\t"
"movq %[rseq_scratch0], %[src]\n\t",
cmpfail)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_CMPFAIL(6,
"movq %[rseq_scratch2], %[len]\n\t"
"movq %[rseq_scratch1], %[dst]\n\t"
"movq %[rseq_scratch0], %[src]\n\t",
error1)
RSEQ_ASM_DEFINE_CMPFAIL(7,
"movq %[rseq_scratch2], %[len]\n\t"
"movq %[rseq_scratch1], %[dst]\n\t"
"movq %[rseq_scratch0], %[src]\n\t",
error2)
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv),
/* try memcpy input */
[dst] "r" (dst),
[src] "r" (src),
[len] "r" (len),
[rseq_scratch0] "m" (rseq_scratch[0]),
[rseq_scratch1] "m" (rseq_scratch[1]),
[rseq_scratch2] "m" (rseq_scratch[2])
: "memory", "cc", "rax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
/* x86-64 is TSO. */
static inline __attribute__((always_inline))
int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect,
void *dst, void *src, size_t len,
intptr_t newv, int cpu)
{
return rseq_cmpeqv_trymemcpy_storev(v, expect, dst, src, len,
newv, cpu);
}
#endif /* !RSEQ_SKIP_FASTPATH */
#elif __i386__
#define rseq_smp_mb() \
__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
#define rseq_smp_rmb() \
__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
#define rseq_smp_wmb() \
__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
#define rseq_smp_load_acquire(p) \
__extension__ ({ \
__typeof(*p) ____p1 = RSEQ_READ_ONCE(*p); \
rseq_smp_mb(); \
____p1; \
})
#define rseq_smp_acquire__after_ctrl_dep() rseq_smp_rmb()
#define rseq_smp_store_release(p, v) \
do { \
rseq_smp_mb(); \
RSEQ_WRITE_ONCE(*p, v); \
} while (0)
#ifdef RSEQ_SKIP_FASTPATH
#include "rseq-skip.h"
#else /* !RSEQ_SKIP_FASTPATH */
/*
* Use eax as scratch register and take memory operands as input to
* lessen register pressure. Especially needed when compiling in O0.
*/
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \
".popsection\n\t" \
".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
".long " __rseq_str(label) "b, 0x0\n\t" \
".popsection\n\t"
#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
__RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
(post_commit_ip - start_ip), abort_ip)
/*
* Exit points of a rseq critical section consist of all instructions outside
* of the critical section where a critical section can either branch to or
* reach through the normal course of its execution. The abort IP and the
* post-commit IP are already part of the __rseq_cs section and should not be
* explicitly defined as additional exit points. Knowing all exit points is
* useful to assist debuggers stepping over the critical section.
*/
#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \
".popsection\n\t"
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
RSEQ_INJECT_ASM(1) \
"movl $" __rseq_str(cs_label) ", " __rseq_str(rseq_cs) "\n\t" \
__rseq_str(label) ":\n\t"
#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
RSEQ_INJECT_ASM(2) \
"cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \
"jnz " __rseq_str(label) "\n\t"
#define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \
".pushsection __rseq_failure, \"ax\"\n\t" \
/* Disassembler-friendly signature: ud1 <sig>,%edi. */ \
".byte 0x0f, 0xb9, 0x3d\n\t" \
".long " __rseq_str(RSEQ_SIG) "\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
"jmp %l[" __rseq_str(abort_label) "]\n\t" \
".popsection\n\t"
#define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \
".pushsection __rseq_failure, \"ax\"\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
"jmp %l[" __rseq_str(cmpfail_label) "]\n\t" \
".popsection\n\t"
static inline __attribute__((always_inline))
int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpl %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpl %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
/* final store */
"movl %[newv], %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(5)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
: "memory", "cc", "eax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
/*
* Compare @v against @expectnot. When it does _not_ match, load @v
* into @load, and store the content of *@v + voffp into @v.
*/
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
off_t voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[v], %%ebx\n\t"
"cmpl %%ebx, %[expectnot]\n\t"
"je %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"movl %[v], %%ebx\n\t"
"cmpl %%ebx, %[expectnot]\n\t"
"je %l[error2]\n\t"
#endif
"movl %%ebx, %[load]\n\t"
"addl %[voffp], %%ebx\n\t"
"movl (%%ebx), %%ebx\n\t"
/* final store */
"movl %%ebx, %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(5)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
[voffp] "ir" (voffp),
[load] "m" (*load)
: "memory", "cc", "eax", "ebx"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
static inline __attribute__((always_inline))
int rseq_addv(intptr_t *v, intptr_t count, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
#endif
/* final store */
"addl %[count], %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(4)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[count] "ir" (count)
: "memory", "cc", "eax"
RSEQ_INJECT_CLOBBER
: abort
#ifdef RSEQ_COMPARE_TWICE
, error1
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
#endif
}
static inline __attribute__((always_inline))
int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect,
intptr_t *v2, intptr_t newv2,
intptr_t newv, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpl %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpl %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
/* try store */
"movl %[newv2], %%eax\n\t"
"movl %%eax, %[v2]\n\t"
RSEQ_INJECT_ASM(5)
/* final store */
"movl %[newv], %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(6)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* try store input */
[v2] "m" (*v2),
[newv2] "m" (newv2),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
: "memory", "cc", "eax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
static inline __attribute__((always_inline))
int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect,
intptr_t *v2, intptr_t newv2,
intptr_t newv, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[expect], %%eax\n\t"
"cmpl %[v], %%eax\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"movl %[expect], %%eax\n\t"
"cmpl %[v], %%eax\n\t"
"jnz %l[error2]\n\t"
#endif
/* try store */
"movl %[newv2], %[v2]\n\t"
RSEQ_INJECT_ASM(5)
"lock; addl $0,-128(%%esp)\n\t"
/* final store */
"movl %[newv], %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(6)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
/* final store input */
[v] "m" (*v),
[expect] "m" (expect),
[newv] "r" (newv)
: "memory", "cc", "eax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
static inline __attribute__((always_inline))
int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect,
intptr_t *v2, intptr_t expect2,
intptr_t newv, int cpu)
{
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpl %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
"cmpl %[expect2], %[v2]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(5)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpl %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
"cmpl %[expect2], %[v2]\n\t"
"jnz %l[error3]\n\t"
#endif
"movl %[newv], %%eax\n\t"
/* final store */
"movl %%eax, %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(6)
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
[newv] "m" (newv)
: "memory", "cc", "eax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2, error3
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("1st expected value comparison failed");
error3:
rseq_bug("2nd expected value comparison failed");
#endif
}
/* TODO: implement a faster memcpy. */
static inline __attribute__((always_inline))
int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect,
void *dst, void *src, size_t len,
intptr_t newv, int cpu)
{
uint32_t rseq_scratch[3];
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
"movl %[src], %[rseq_scratch0]\n\t"
"movl %[dst], %[rseq_scratch1]\n\t"
"movl %[len], %[rseq_scratch2]\n\t"
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 5f\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 7f\n\t"
#endif
/* try memcpy */
"test %[len], %[len]\n\t" \
"jz 333f\n\t" \
"222:\n\t" \
"movb (%[src]), %%al\n\t" \
"movb %%al, (%[dst])\n\t" \
"inc %[src]\n\t" \
"inc %[dst]\n\t" \
"dec %[len]\n\t" \
"jnz 222b\n\t" \
"333:\n\t" \
RSEQ_INJECT_ASM(5)
"movl %[newv], %%eax\n\t"
/* final store */
"movl %%eax, %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(6)
/* teardown */
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t"
RSEQ_ASM_DEFINE_ABORT(4,
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t",
abort)
RSEQ_ASM_DEFINE_CMPFAIL(5,
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t",
cmpfail)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_CMPFAIL(6,
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t",
error1)
RSEQ_ASM_DEFINE_CMPFAIL(7,
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t",
error2)
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expect] "m" (expect),
[newv] "m" (newv),
/* try memcpy input */
[dst] "r" (dst),
[src] "r" (src),
[len] "r" (len),
[rseq_scratch0] "m" (rseq_scratch[0]),
[rseq_scratch1] "m" (rseq_scratch[1]),
[rseq_scratch2] "m" (rseq_scratch[2])
: "memory", "cc", "eax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
/* TODO: implement a faster memcpy. */
static inline __attribute__((always_inline))
int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect,
void *dst, void *src, size_t len,
intptr_t newv, int cpu)
{
uint32_t rseq_scratch[3];
RSEQ_INJECT_C(9)
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
"movl %[src], %[rseq_scratch0]\n\t"
"movl %[dst], %[rseq_scratch1]\n\t"
"movl %[len], %[rseq_scratch2]\n\t"
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 5f\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 7f\n\t"
#endif
/* try memcpy */
"test %[len], %[len]\n\t" \
"jz 333f\n\t" \
"222:\n\t" \
"movb (%[src]), %%al\n\t" \
"movb %%al, (%[dst])\n\t" \
"inc %[src]\n\t" \
"inc %[dst]\n\t" \
"dec %[len]\n\t" \
"jnz 222b\n\t" \
"333:\n\t" \
RSEQ_INJECT_ASM(5)
"lock; addl $0,-128(%%esp)\n\t"
"movl %[newv], %%eax\n\t"
/* final store */
"movl %%eax, %[v]\n\t"
"2:\n\t"
RSEQ_INJECT_ASM(6)
/* teardown */
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t"
RSEQ_ASM_DEFINE_ABORT(4,
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t",
abort)
RSEQ_ASM_DEFINE_CMPFAIL(5,
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t",
cmpfail)
#ifdef RSEQ_COMPARE_TWICE
RSEQ_ASM_DEFINE_CMPFAIL(6,
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t",
error1)
RSEQ_ASM_DEFINE_CMPFAIL(7,
"movl %[rseq_scratch2], %[len]\n\t"
"movl %[rseq_scratch1], %[dst]\n\t"
"movl %[rseq_scratch0], %[src]\n\t",
error2)
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expect] "m" (expect),
[newv] "m" (newv),
/* try memcpy input */
[dst] "r" (dst),
[src] "r" (src),
[len] "r" (len),
[rseq_scratch0] "m" (rseq_scratch[0]),
[rseq_scratch1] "m" (rseq_scratch[1]),
[rseq_scratch2] "m" (rseq_scratch[2])
: "memory", "cc", "eax"
RSEQ_INJECT_CLOBBER
: abort, cmpfail
#ifdef RSEQ_COMPARE_TWICE
, error1, error2
#endif
);
return 0;
abort:
RSEQ_INJECT_FAILED
return -1;
cmpfail:
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
rseq_bug("cpu_id comparison failed");
error2:
rseq_bug("expected value comparison failed");
#endif
}
#endif /* !RSEQ_SKIP_FASTPATH */
#endif