| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol |
| |
| maintainers: |
| - Robert Chiras <robert.chiras@nxp.com> |
| |
| allOf: |
| - $ref: panel-common.yaml# |
| |
| properties: |
| compatible: |
| const: raydium,rm67191 |
| |
| reg: true |
| port: true |
| reset-gpios: true |
| width-mm: true |
| height-mm: true |
| |
| dsi-lanes: |
| description: Number of DSI lanes to be used must be <3> or <4> |
| enum: [3, 4] |
| |
| v3p3-supply: |
| description: phandle to 3.3V regulator that powers the VDD_3V3 pin |
| |
| v1p8-supply: |
| description: phandle to 1.8V regulator that powers the VDD_1V8 pin |
| |
| video-mode: |
| description: | |
| 0 - burst-mode |
| 1 - non-burst with sync event |
| 2 - non-burst with sync pulse |
| enum: [0, 1, 2] |
| |
| required: |
| - compatible |
| - reg |
| - dsi-lanes |
| - port |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| panel@0 { |
| compatible = "raydium,rm67191"; |
| reg = <0>; |
| reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| dsi-lanes = <4>; |
| width-mm = <68>; |
| height-mm = <121>; |
| video-mode = <1>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&mipi_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |
