| * Chipselect/Local Bus |
| |
| Properties: |
| - name : Should be localbus |
| - #address-cells : Should be either two or three. The first cell is the |
| chipselect number, and the remaining cells are the |
| offset into the chipselect. |
| - #size-cells : Either one or two, depending on how large each chipselect |
| can be. |
| - ranges : Each range corresponds to a single chipselect, and cover |
| the entire access window as configured. |
| |
| Example: |
| localbus@f0010100 { |
| compatible = "fsl,mpc8272-localbus", |
| "fsl,pq2-localbus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| reg = <0xf0010100 0x40>; |
| |
| ranges = <0x0 0x0 0xfe000000 0x02000000 |
| 0x1 0x0 0xf4500000 0x00008000 |
| 0x2 0x0 0xfd810000 0x00010000>; |
| |
| flash@0,0 { |
| compatible = "jedec-flash"; |
| reg = <0x0 0x0 0x2000000>; |
| bank-width = <4>; |
| device-width = <1>; |
| }; |
| |
| board-control@1,0 { |
| reg = <0x1 0x0 0x20>; |
| compatible = "fsl,mpc8272ads-bcsr"; |
| }; |
| |
| simple-periph@2,0 { |
| compatible = "fsl,elbc-gpcm-uio"; |
| reg = <0x2 0x0 0x10000>; |
| elbc-gpcm-br = <0xfd810800>; |
| elbc-gpcm-or = <0xffff09f7>; |
| }; |
| }; |
