| // SPDX-License-Identifier: GPL-2.0 |
| |
| /* |
| * Architecture neutral utility routines for interacting with |
| * Hyper-V. This file is specifically for code that must be |
| * built-in to the kernel image when CONFIG_HYPERV is set |
| * (vs. being in a module) because it is called from architecture |
| * specific code under arch/. |
| * |
| * Copyright (C) 2021, Microsoft, Inc. |
| * |
| * Author : Michael Kelley <mikelley@microsoft.com> |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/acpi.h> |
| #include <linux/export.h> |
| #include <linux/bitfield.h> |
| #include <linux/cpumask.h> |
| #include <linux/sched/task_stack.h> |
| #include <linux/panic_notifier.h> |
| #include <linux/ptrace.h> |
| #include <linux/kdebug.h> |
| #include <linux/kmsg_dump.h> |
| #include <linux/slab.h> |
| #include <linux/dma-map-ops.h> |
| #include <asm/hyperv-tlfs.h> |
| #include <asm/mshyperv.h> |
| |
| /* |
| * hv_root_partition, ms_hyperv and hv_nested are defined here with other |
| * Hyper-V specific globals so they are shared across all architectures and are |
| * built only when CONFIG_HYPERV is defined. But on x86, |
| * ms_hyperv_init_platform() is built even when CONFIG_HYPERV is not |
| * defined, and it uses these three variables. So mark them as __weak |
| * here, allowing for an overriding definition in the module containing |
| * ms_hyperv_init_platform(). |
| */ |
| bool __weak hv_root_partition; |
| EXPORT_SYMBOL_GPL(hv_root_partition); |
| |
| bool __weak hv_nested; |
| EXPORT_SYMBOL_GPL(hv_nested); |
| |
| struct ms_hyperv_info __weak ms_hyperv; |
| EXPORT_SYMBOL_GPL(ms_hyperv); |
| |
| u32 *hv_vp_index; |
| EXPORT_SYMBOL_GPL(hv_vp_index); |
| |
| u32 hv_max_vp_index; |
| EXPORT_SYMBOL_GPL(hv_max_vp_index); |
| |
| void * __percpu *hyperv_pcpu_input_arg; |
| EXPORT_SYMBOL_GPL(hyperv_pcpu_input_arg); |
| |
| void * __percpu *hyperv_pcpu_output_arg; |
| EXPORT_SYMBOL_GPL(hyperv_pcpu_output_arg); |
| |
| static void hv_kmsg_dump_unregister(void); |
| |
| static struct ctl_table_header *hv_ctl_table_hdr; |
| |
| /* |
| * Hyper-V specific initialization and shutdown code that is |
| * common across all architectures. Called from architecture |
| * specific initialization functions. |
| */ |
| |
| void __init hv_common_free(void) |
| { |
| unregister_sysctl_table(hv_ctl_table_hdr); |
| hv_ctl_table_hdr = NULL; |
| |
| if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) |
| hv_kmsg_dump_unregister(); |
| |
| kfree(hv_vp_index); |
| hv_vp_index = NULL; |
| |
| free_percpu(hyperv_pcpu_output_arg); |
| hyperv_pcpu_output_arg = NULL; |
| |
| free_percpu(hyperv_pcpu_input_arg); |
| hyperv_pcpu_input_arg = NULL; |
| } |
| |
| /* |
| * Functions for allocating and freeing memory with size and |
| * alignment HV_HYP_PAGE_SIZE. These functions are needed because |
| * the guest page size may not be the same as the Hyper-V page |
| * size. We depend upon kmalloc() aligning power-of-two size |
| * allocations to the allocation size boundary, so that the |
| * allocated memory appears to Hyper-V as a page of the size |
| * it expects. |
| */ |
| |
| void *hv_alloc_hyperv_page(void) |
| { |
| BUILD_BUG_ON(PAGE_SIZE < HV_HYP_PAGE_SIZE); |
| |
| if (PAGE_SIZE == HV_HYP_PAGE_SIZE) |
| return (void *)__get_free_page(GFP_KERNEL); |
| else |
| return kmalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL); |
| } |
| EXPORT_SYMBOL_GPL(hv_alloc_hyperv_page); |
| |
| void *hv_alloc_hyperv_zeroed_page(void) |
| { |
| if (PAGE_SIZE == HV_HYP_PAGE_SIZE) |
| return (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO); |
| else |
| return kzalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL); |
| } |
| EXPORT_SYMBOL_GPL(hv_alloc_hyperv_zeroed_page); |
| |
| void hv_free_hyperv_page(unsigned long addr) |
| { |
| if (PAGE_SIZE == HV_HYP_PAGE_SIZE) |
| free_page(addr); |
| else |
| kfree((void *)addr); |
| } |
| EXPORT_SYMBOL_GPL(hv_free_hyperv_page); |
| |
| static void *hv_panic_page; |
| |
| /* |
| * Boolean to control whether to report panic messages over Hyper-V. |
| * |
| * It can be set via /proc/sys/kernel/hyperv_record_panic_msg |
| */ |
| static int sysctl_record_panic_msg = 1; |
| |
| /* |
| * sysctl option to allow the user to control whether kmsg data should be |
| * reported to Hyper-V on panic. |
| */ |
| static struct ctl_table hv_ctl_table[] = { |
| { |
| .procname = "hyperv_record_panic_msg", |
| .data = &sysctl_record_panic_msg, |
| .maxlen = sizeof(int), |
| .mode = 0644, |
| .proc_handler = proc_dointvec_minmax, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = SYSCTL_ONE |
| }, |
| {} |
| }; |
| |
| static int hv_die_panic_notify_crash(struct notifier_block *self, |
| unsigned long val, void *args); |
| |
| static struct notifier_block hyperv_die_report_block = { |
| .notifier_call = hv_die_panic_notify_crash, |
| }; |
| |
| static struct notifier_block hyperv_panic_report_block = { |
| .notifier_call = hv_die_panic_notify_crash, |
| }; |
| |
| /* |
| * The following callback works both as die and panic notifier; its |
| * goal is to provide panic information to the hypervisor unless the |
| * kmsg dumper is used [see hv_kmsg_dump()], which provides more |
| * information but isn't always available. |
| * |
| * Notice that both the panic/die report notifiers are registered only |
| * if we have the capability HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE set. |
| */ |
| static int hv_die_panic_notify_crash(struct notifier_block *self, |
| unsigned long val, void *args) |
| { |
| struct pt_regs *regs; |
| bool is_die; |
| |
| /* Don't notify Hyper-V unless we have a die oops event or panic. */ |
| if (self == &hyperv_panic_report_block) { |
| is_die = false; |
| regs = current_pt_regs(); |
| } else { /* die event */ |
| if (val != DIE_OOPS) |
| return NOTIFY_DONE; |
| |
| is_die = true; |
| regs = ((struct die_args *)args)->regs; |
| } |
| |
| /* |
| * Hyper-V should be notified only once about a panic/die. If we will |
| * be calling hv_kmsg_dump() later with kmsg data, don't do the |
| * notification here. |
| */ |
| if (!sysctl_record_panic_msg || !hv_panic_page) |
| hyperv_report_panic(regs, val, is_die); |
| |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * Callback from kmsg_dump. Grab as much as possible from the end of the kmsg |
| * buffer and call into Hyper-V to transfer the data. |
| */ |
| static void hv_kmsg_dump(struct kmsg_dumper *dumper, |
| enum kmsg_dump_reason reason) |
| { |
| struct kmsg_dump_iter iter; |
| size_t bytes_written; |
| |
| /* We are only interested in panics. */ |
| if (reason != KMSG_DUMP_PANIC || !sysctl_record_panic_msg) |
| return; |
| |
| /* |
| * Write dump contents to the page. No need to synchronize; panic should |
| * be single-threaded. |
| */ |
| kmsg_dump_rewind(&iter); |
| kmsg_dump_get_buffer(&iter, false, hv_panic_page, HV_HYP_PAGE_SIZE, |
| &bytes_written); |
| if (!bytes_written) |
| return; |
| /* |
| * P3 to contain the physical address of the panic page & P4 to |
| * contain the size of the panic data in that page. Rest of the |
| * registers are no-op when the NOTIFY_MSG flag is set. |
| */ |
| hv_set_register(HV_REGISTER_CRASH_P0, 0); |
| hv_set_register(HV_REGISTER_CRASH_P1, 0); |
| hv_set_register(HV_REGISTER_CRASH_P2, 0); |
| hv_set_register(HV_REGISTER_CRASH_P3, virt_to_phys(hv_panic_page)); |
| hv_set_register(HV_REGISTER_CRASH_P4, bytes_written); |
| |
| /* |
| * Let Hyper-V know there is crash data available along with |
| * the panic message. |
| */ |
| hv_set_register(HV_REGISTER_CRASH_CTL, |
| (HV_CRASH_CTL_CRASH_NOTIFY | |
| HV_CRASH_CTL_CRASH_NOTIFY_MSG)); |
| } |
| |
| static struct kmsg_dumper hv_kmsg_dumper = { |
| .dump = hv_kmsg_dump, |
| }; |
| |
| static void hv_kmsg_dump_unregister(void) |
| { |
| kmsg_dump_unregister(&hv_kmsg_dumper); |
| unregister_die_notifier(&hyperv_die_report_block); |
| atomic_notifier_chain_unregister(&panic_notifier_list, |
| &hyperv_panic_report_block); |
| |
| hv_free_hyperv_page((unsigned long)hv_panic_page); |
| hv_panic_page = NULL; |
| } |
| |
| static void hv_kmsg_dump_register(void) |
| { |
| int ret; |
| |
| hv_panic_page = hv_alloc_hyperv_zeroed_page(); |
| if (!hv_panic_page) { |
| pr_err("Hyper-V: panic message page memory allocation failed\n"); |
| return; |
| } |
| |
| ret = kmsg_dump_register(&hv_kmsg_dumper); |
| if (ret) { |
| pr_err("Hyper-V: kmsg dump register error 0x%x\n", ret); |
| hv_free_hyperv_page((unsigned long)hv_panic_page); |
| hv_panic_page = NULL; |
| } |
| } |
| |
| int __init hv_common_init(void) |
| { |
| int i; |
| |
| if (hv_is_isolation_supported()) |
| sysctl_record_panic_msg = 0; |
| |
| /* |
| * Hyper-V expects to get crash register data or kmsg when |
| * crash enlightment is available and system crashes. Set |
| * crash_kexec_post_notifiers to be true to make sure that |
| * calling crash enlightment interface before running kdump |
| * kernel. |
| */ |
| if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) { |
| u64 hyperv_crash_ctl; |
| |
| crash_kexec_post_notifiers = true; |
| pr_info("Hyper-V: enabling crash_kexec_post_notifiers\n"); |
| |
| /* |
| * Panic message recording (sysctl_record_panic_msg) |
| * is enabled by default in non-isolated guests and |
| * disabled by default in isolated guests; the panic |
| * message recording won't be available in isolated |
| * guests should the following registration fail. |
| */ |
| hv_ctl_table_hdr = register_sysctl("kernel", hv_ctl_table); |
| if (!hv_ctl_table_hdr) |
| pr_err("Hyper-V: sysctl table register error"); |
| |
| /* |
| * Register for panic kmsg callback only if the right |
| * capability is supported by the hypervisor. |
| */ |
| hyperv_crash_ctl = hv_get_register(HV_REGISTER_CRASH_CTL); |
| if (hyperv_crash_ctl & HV_CRASH_CTL_CRASH_NOTIFY_MSG) |
| hv_kmsg_dump_register(); |
| |
| register_die_notifier(&hyperv_die_report_block); |
| atomic_notifier_chain_register(&panic_notifier_list, |
| &hyperv_panic_report_block); |
| } |
| |
| /* |
| * Allocate the per-CPU state for the hypercall input arg. |
| * If this allocation fails, we will not be able to setup |
| * (per-CPU) hypercall input page and thus this failure is |
| * fatal on Hyper-V. |
| */ |
| hyperv_pcpu_input_arg = alloc_percpu(void *); |
| BUG_ON(!hyperv_pcpu_input_arg); |
| |
| /* Allocate the per-CPU state for output arg for root */ |
| if (hv_root_partition) { |
| hyperv_pcpu_output_arg = alloc_percpu(void *); |
| BUG_ON(!hyperv_pcpu_output_arg); |
| } |
| |
| hv_vp_index = kmalloc_array(num_possible_cpus(), sizeof(*hv_vp_index), |
| GFP_KERNEL); |
| if (!hv_vp_index) { |
| hv_common_free(); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < num_possible_cpus(); i++) |
| hv_vp_index[i] = VP_INVAL; |
| |
| return 0; |
| } |
| |
| /* |
| * Hyper-V specific initialization and die code for |
| * individual CPUs that is common across all architectures. |
| * Called by the CPU hotplug mechanism. |
| */ |
| |
| int hv_common_cpu_init(unsigned int cpu) |
| { |
| void **inputarg, **outputarg; |
| u64 msr_vp_index; |
| gfp_t flags; |
| int pgcount = hv_root_partition ? 2 : 1; |
| |
| /* hv_cpu_init() can be called with IRQs disabled from hv_resume() */ |
| flags = irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL; |
| |
| inputarg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg); |
| *inputarg = kmalloc(pgcount * HV_HYP_PAGE_SIZE, flags); |
| if (!(*inputarg)) |
| return -ENOMEM; |
| |
| if (hv_root_partition) { |
| outputarg = (void **)this_cpu_ptr(hyperv_pcpu_output_arg); |
| *outputarg = (char *)(*inputarg) + HV_HYP_PAGE_SIZE; |
| } |
| |
| msr_vp_index = hv_get_register(HV_REGISTER_VP_INDEX); |
| |
| hv_vp_index[cpu] = msr_vp_index; |
| |
| if (msr_vp_index > hv_max_vp_index) |
| hv_max_vp_index = msr_vp_index; |
| |
| return 0; |
| } |
| |
| int hv_common_cpu_die(unsigned int cpu) |
| { |
| unsigned long flags; |
| void **inputarg, **outputarg; |
| void *mem; |
| |
| local_irq_save(flags); |
| |
| inputarg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg); |
| mem = *inputarg; |
| *inputarg = NULL; |
| |
| if (hv_root_partition) { |
| outputarg = (void **)this_cpu_ptr(hyperv_pcpu_output_arg); |
| *outputarg = NULL; |
| } |
| |
| local_irq_restore(flags); |
| |
| kfree(mem); |
| |
| return 0; |
| } |
| |
| /* Bit mask of the extended capability to query: see HV_EXT_CAPABILITY_xxx */ |
| bool hv_query_ext_cap(u64 cap_query) |
| { |
| /* |
| * The address of the 'hv_extended_cap' variable will be used as an |
| * output parameter to the hypercall below and so it should be |
| * compatible with 'virt_to_phys'. Which means, it's address should be |
| * directly mapped. Use 'static' to keep it compatible; stack variables |
| * can be virtually mapped, making them incompatible with |
| * 'virt_to_phys'. |
| * Hypercall input/output addresses should also be 8-byte aligned. |
| */ |
| static u64 hv_extended_cap __aligned(8); |
| static bool hv_extended_cap_queried; |
| u64 status; |
| |
| /* |
| * Querying extended capabilities is an extended hypercall. Check if the |
| * partition supports extended hypercall, first. |
| */ |
| if (!(ms_hyperv.priv_high & HV_ENABLE_EXTENDED_HYPERCALLS)) |
| return false; |
| |
| /* Extended capabilities do not change at runtime. */ |
| if (hv_extended_cap_queried) |
| return hv_extended_cap & cap_query; |
| |
| status = hv_do_hypercall(HV_EXT_CALL_QUERY_CAPABILITIES, NULL, |
| &hv_extended_cap); |
| |
| /* |
| * The query extended capabilities hypercall should not fail under |
| * any normal circumstances. Avoid repeatedly making the hypercall, on |
| * error. |
| */ |
| hv_extended_cap_queried = true; |
| if (!hv_result_success(status)) { |
| pr_err("Hyper-V: Extended query capabilities hypercall failed 0x%llx\n", |
| status); |
| return false; |
| } |
| |
| return hv_extended_cap & cap_query; |
| } |
| EXPORT_SYMBOL_GPL(hv_query_ext_cap); |
| |
| void hv_setup_dma_ops(struct device *dev, bool coherent) |
| { |
| /* |
| * Hyper-V does not offer a vIOMMU in the guest |
| * VM, so pass 0/NULL for the IOMMU settings |
| */ |
| arch_setup_dma_ops(dev, 0, 0, NULL, coherent); |
| } |
| EXPORT_SYMBOL_GPL(hv_setup_dma_ops); |
| |
| bool hv_is_hibernation_supported(void) |
| { |
| return !hv_root_partition && acpi_sleep_state_supported(ACPI_STATE_S4); |
| } |
| EXPORT_SYMBOL_GPL(hv_is_hibernation_supported); |
| |
| /* |
| * Default function to read the Hyper-V reference counter, independent |
| * of whether Hyper-V enlightened clocks/timers are being used. But on |
| * architectures where it is used, Hyper-V enlightenment code in |
| * hyperv_timer.c may override this function. |
| */ |
| static u64 __hv_read_ref_counter(void) |
| { |
| return hv_get_register(HV_REGISTER_TIME_REF_COUNT); |
| } |
| |
| u64 (*hv_read_reference_counter)(void) = __hv_read_ref_counter; |
| EXPORT_SYMBOL_GPL(hv_read_reference_counter); |
| |
| /* These __weak functions provide default "no-op" behavior and |
| * may be overridden by architecture specific versions. Architectures |
| * for which the default "no-op" behavior is sufficient can leave |
| * them unimplemented and not be cluttered with a bunch of stub |
| * functions in arch-specific code. |
| */ |
| |
| bool __weak hv_is_isolation_supported(void) |
| { |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(hv_is_isolation_supported); |
| |
| bool __weak hv_isolation_type_snp(void) |
| { |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(hv_isolation_type_snp); |
| |
| void __weak hv_setup_vmbus_handler(void (*handler)(void)) |
| { |
| } |
| EXPORT_SYMBOL_GPL(hv_setup_vmbus_handler); |
| |
| void __weak hv_remove_vmbus_handler(void) |
| { |
| } |
| EXPORT_SYMBOL_GPL(hv_remove_vmbus_handler); |
| |
| void __weak hv_setup_kexec_handler(void (*handler)(void)) |
| { |
| } |
| EXPORT_SYMBOL_GPL(hv_setup_kexec_handler); |
| |
| void __weak hv_remove_kexec_handler(void) |
| { |
| } |
| EXPORT_SYMBOL_GPL(hv_remove_kexec_handler); |
| |
| void __weak hv_setup_crash_handler(void (*handler)(struct pt_regs *regs)) |
| { |
| } |
| EXPORT_SYMBOL_GPL(hv_setup_crash_handler); |
| |
| void __weak hv_remove_crash_handler(void) |
| { |
| } |
| EXPORT_SYMBOL_GPL(hv_remove_crash_handler); |
| |
| void __weak hyperv_cleanup(void) |
| { |
| } |
| EXPORT_SYMBOL_GPL(hyperv_cleanup); |
| |
| u64 __weak hv_ghcb_hypercall(u64 control, void *input, void *output, u32 input_size) |
| { |
| return HV_STATUS_INVALID_PARAMETER; |
| } |
| EXPORT_SYMBOL_GPL(hv_ghcb_hypercall); |