| .. SPDX-License-Identifier: GPL-2.0 |
| |
| Index Nodes |
| ----------- |
| |
| In a regular UNIX filesystem, the inode stores all the metadata |
| pertaining to the file (time stamps, block maps, extended attributes, |
| etc), not the directory entry. To find the information associated with a |
| file, one must traverse the directory files to find the directory entry |
| associated with a file, then load the inode to find the metadata for |
| that file. ext4 appears to cheat (for performance reasons) a little bit |
| by storing a copy of the file type (normally stored in the inode) in the |
| directory entry. (Compare all this to FAT, which stores all the file |
| information directly in the directory entry, but does not support hard |
| links and is in general more seek-happy than ext4 due to its simpler |
| block allocator and extensive use of linked lists.) |
| |
| The inode table is a linear array of ``struct ext4_inode``. The table is |
| sized to have enough blocks to store at least |
| ``sb.s_inode_size * sb.s_inodes_per_group`` bytes. The number of the |
| block group containing an inode can be calculated as |
| ``(inode_number - 1) / sb.s_inodes_per_group``, and the offset into the |
| group's table is ``(inode_number - 1) % sb.s_inodes_per_group``. There |
| is no inode 0. |
| |
| The inode checksum is calculated against the FS UUID, the inode number, |
| and the inode structure itself. |
| |
| The inode table entry is laid out in ``struct ext4_inode``. |
| |
| .. list-table:: |
| :widths: 8 8 24 40 |
| :header-rows: 1 |
| :class: longtable |
| |
| * - Offset |
| - Size |
| - Name |
| - Description |
| * - 0x0 |
| - \_\_le16 |
| - i\_mode |
| - File mode. See the table i_mode_ below. |
| * - 0x2 |
| - \_\_le16 |
| - i\_uid |
| - Lower 16-bits of Owner UID. |
| * - 0x4 |
| - \_\_le32 |
| - i\_size\_lo |
| - Lower 32-bits of size in bytes. |
| * - 0x8 |
| - \_\_le32 |
| - i\_atime |
| - Last access time, in seconds since the epoch. However, if the EA\_INODE |
| inode flag is set, this inode stores an extended attribute value and |
| this field contains the checksum of the value. |
| * - 0xC |
| - \_\_le32 |
| - i\_ctime |
| - Last inode change time, in seconds since the epoch. However, if the |
| EA\_INODE inode flag is set, this inode stores an extended attribute |
| value and this field contains the lower 32 bits of the attribute value's |
| reference count. |
| * - 0x10 |
| - \_\_le32 |
| - i\_mtime |
| - Last data modification time, in seconds since the epoch. However, if the |
| EA\_INODE inode flag is set, this inode stores an extended attribute |
| value and this field contains the number of the inode that owns the |
| extended attribute. |
| * - 0x14 |
| - \_\_le32 |
| - i\_dtime |
| - Deletion Time, in seconds since the epoch. |
| * - 0x18 |
| - \_\_le16 |
| - i\_gid |
| - Lower 16-bits of GID. |
| * - 0x1A |
| - \_\_le16 |
| - i\_links\_count |
| - Hard link count. Normally, ext4 does not permit an inode to have more |
| than 65,000 hard links. This applies to files as well as directories, |
| which means that there cannot be more than 64,998 subdirectories in a |
| directory (each subdirectory's '..' entry counts as a hard link, as does |
| the '.' entry in the directory itself). With the DIR\_NLINK feature |
| enabled, ext4 supports more than 64,998 subdirectories by setting this |
| field to 1 to indicate that the number of hard links is not known. |
| * - 0x1C |
| - \_\_le32 |
| - i\_blocks\_lo |
| - Lower 32-bits of “block” count. If the huge\_file feature flag is not |
| set on the filesystem, the file consumes ``i_blocks_lo`` 512-byte blocks |
| on disk. If huge\_file is set and EXT4\_HUGE\_FILE\_FL is NOT set in |
| ``inode.i_flags``, then the file consumes ``i_blocks_lo + (i_blocks_hi |
| << 32)`` 512-byte blocks on disk. If huge\_file is set and |
| EXT4\_HUGE\_FILE\_FL IS set in ``inode.i_flags``, then this file |
| consumes (``i_blocks_lo + i_blocks_hi`` << 32) filesystem blocks on |
| disk. |
| * - 0x20 |
| - \_\_le32 |
| - i\_flags |
| - Inode flags. See the table i_flags_ below. |
| * - 0x24 |
| - 4 bytes |
| - i\_osd1 |
| - See the table i_osd1_ for more details. |
| * - 0x28 |
| - 60 bytes |
| - i\_block[EXT4\_N\_BLOCKS=15] |
| - Block map or extent tree. See the section “The Contents of inode.i\_block”. |
| * - 0x64 |
| - \_\_le32 |
| - i\_generation |
| - File version (for NFS). |
| * - 0x68 |
| - \_\_le32 |
| - i\_file\_acl\_lo |
| - Lower 32-bits of extended attribute block. ACLs are of course one of |
| many possible extended attributes; I think the name of this field is a |
| result of the first use of extended attributes being for ACLs. |
| * - 0x6C |
| - \_\_le32 |
| - i\_size\_high / i\_dir\_acl |
| - Upper 32-bits of file/directory size. In ext2/3 this field was named |
| i\_dir\_acl, though it was usually set to zero and never used. |
| * - 0x70 |
| - \_\_le32 |
| - i\_obso\_faddr |
| - (Obsolete) fragment address. |
| * - 0x74 |
| - 12 bytes |
| - i\_osd2 |
| - See the table i_osd2_ for more details. |
| * - 0x80 |
| - \_\_le16 |
| - i\_extra\_isize |
| - Size of this inode - 128. Alternately, the size of the extended inode |
| fields beyond the original ext2 inode, including this field. |
| * - 0x82 |
| - \_\_le16 |
| - i\_checksum\_hi |
| - Upper 16-bits of the inode checksum. |
| * - 0x84 |
| - \_\_le32 |
| - i\_ctime\_extra |
| - Extra change time bits. This provides sub-second precision. See Inode |
| Timestamps section. |
| * - 0x88 |
| - \_\_le32 |
| - i\_mtime\_extra |
| - Extra modification time bits. This provides sub-second precision. |
| * - 0x8C |
| - \_\_le32 |
| - i\_atime\_extra |
| - Extra access time bits. This provides sub-second precision. |
| * - 0x90 |
| - \_\_le32 |
| - i\_crtime |
| - File creation time, in seconds since the epoch. |
| * - 0x94 |
| - \_\_le32 |
| - i\_crtime\_extra |
| - Extra file creation time bits. This provides sub-second precision. |
| * - 0x98 |
| - \_\_le32 |
| - i\_version\_hi |
| - Upper 32-bits for version number. |
| * - 0x9C |
| - \_\_le32 |
| - i\_projid |
| - Project ID. |
| |
| .. _i_mode: |
| |
| The ``i_mode`` value is a combination of the following flags: |
| |
| .. list-table:: |
| :widths: 16 64 |
| :header-rows: 1 |
| |
| * - Value |
| - Description |
| * - 0x1 |
| - S\_IXOTH (Others may execute) |
| * - 0x2 |
| - S\_IWOTH (Others may write) |
| * - 0x4 |
| - S\_IROTH (Others may read) |
| * - 0x8 |
| - S\_IXGRP (Group members may execute) |
| * - 0x10 |
| - S\_IWGRP (Group members may write) |
| * - 0x20 |
| - S\_IRGRP (Group members may read) |
| * - 0x40 |
| - S\_IXUSR (Owner may execute) |
| * - 0x80 |
| - S\_IWUSR (Owner may write) |
| * - 0x100 |
| - S\_IRUSR (Owner may read) |
| * - 0x200 |
| - S\_ISVTX (Sticky bit) |
| * - 0x400 |
| - S\_ISGID (Set GID) |
| * - 0x800 |
| - S\_ISUID (Set UID) |
| * - |
| - These are mutually-exclusive file types: |
| * - 0x1000 |
| - S\_IFIFO (FIFO) |
| * - 0x2000 |
| - S\_IFCHR (Character device) |
| * - 0x4000 |
| - S\_IFDIR (Directory) |
| * - 0x6000 |
| - S\_IFBLK (Block device) |
| * - 0x8000 |
| - S\_IFREG (Regular file) |
| * - 0xA000 |
| - S\_IFLNK (Symbolic link) |
| * - 0xC000 |
| - S\_IFSOCK (Socket) |
| |
| .. _i_flags: |
| |
| The ``i_flags`` field is a combination of these values: |
| |
| .. list-table:: |
| :widths: 16 64 |
| :header-rows: 1 |
| |
| * - Value |
| - Description |
| * - 0x1 |
| - This file requires secure deletion (EXT4\_SECRM\_FL). (not implemented) |
| * - 0x2 |
| - This file should be preserved, should undeletion be desired |
| (EXT4\_UNRM\_FL). (not implemented) |
| * - 0x4 |
| - File is compressed (EXT4\_COMPR\_FL). (not really implemented) |
| * - 0x8 |
| - All writes to the file must be synchronous (EXT4\_SYNC\_FL). |
| * - 0x10 |
| - File is immutable (EXT4\_IMMUTABLE\_FL). |
| * - 0x20 |
| - File can only be appended (EXT4\_APPEND\_FL). |
| * - 0x40 |
| - The dump(1) utility should not dump this file (EXT4\_NODUMP\_FL). |
| * - 0x80 |
| - Do not update access time (EXT4\_NOATIME\_FL). |
| * - 0x100 |
| - Dirty compressed file (EXT4\_DIRTY\_FL). (not used) |
| * - 0x200 |
| - File has one or more compressed clusters (EXT4\_COMPRBLK\_FL). (not used) |
| * - 0x400 |
| - Do not compress file (EXT4\_NOCOMPR\_FL). (not used) |
| * - 0x800 |
| - Encrypted inode (EXT4\_ENCRYPT\_FL). This bit value previously was |
| EXT4\_ECOMPR\_FL (compression error), which was never used. |
| * - 0x1000 |
| - Directory has hashed indexes (EXT4\_INDEX\_FL). |
| * - 0x2000 |
| - AFS magic directory (EXT4\_IMAGIC\_FL). |
| * - 0x4000 |
| - File data must always be written through the journal |
| (EXT4\_JOURNAL\_DATA\_FL). |
| * - 0x8000 |
| - File tail should not be merged (EXT4\_NOTAIL\_FL). (not used by ext4) |
| * - 0x10000 |
| - All directory entry data should be written synchronously (see |
| ``dirsync``) (EXT4\_DIRSYNC\_FL). |
| * - 0x20000 |
| - Top of directory hierarchy (EXT4\_TOPDIR\_FL). |
| * - 0x40000 |
| - This is a huge file (EXT4\_HUGE\_FILE\_FL). |
| * - 0x80000 |
| - Inode uses extents (EXT4\_EXTENTS\_FL). |
| * - 0x100000 |
| - Verity protected file (EXT4\_VERITY\_FL). |
| * - 0x200000 |
| - Inode stores a large extended attribute value in its data blocks |
| (EXT4\_EA\_INODE\_FL). |
| * - 0x400000 |
| - This file has blocks allocated past EOF (EXT4\_EOFBLOCKS\_FL). |
| (deprecated) |
| * - 0x01000000 |
| - Inode is a snapshot (``EXT4_SNAPFILE_FL``). (not in mainline) |
| * - 0x04000000 |
| - Snapshot is being deleted (``EXT4_SNAPFILE_DELETED_FL``). (not in |
| mainline) |
| * - 0x08000000 |
| - Snapshot shrink has completed (``EXT4_SNAPFILE_SHRUNK_FL``). (not in |
| mainline) |
| * - 0x10000000 |
| - Inode has inline data (EXT4\_INLINE\_DATA\_FL). |
| * - 0x20000000 |
| - Create children with the same project ID (EXT4\_PROJINHERIT\_FL). |
| * - 0x80000000 |
| - Reserved for ext4 library (EXT4\_RESERVED\_FL). |
| * - |
| - Aggregate flags: |
| * - 0x705BDFFF |
| - User-visible flags. |
| * - 0x604BC0FF |
| - User-modifiable flags. Note that while EXT4\_JOURNAL\_DATA\_FL and |
| EXT4\_EXTENTS\_FL can be set with setattr, they are not in the kernel's |
| EXT4\_FL\_USER\_MODIFIABLE mask, since it needs to handle the setting of |
| these flags in a special manner and they are masked out of the set of |
| flags that are saved directly to i\_flags. |
| |
| .. _i_osd1: |
| |
| The ``osd1`` field has multiple meanings depending on the creator: |
| |
| Linux: |
| |
| .. list-table:: |
| :widths: 8 8 24 40 |
| :header-rows: 1 |
| |
| * - Offset |
| - Size |
| - Name |
| - Description |
| * - 0x0 |
| - \_\_le32 |
| - l\_i\_version |
| - Inode version. However, if the EA\_INODE inode flag is set, this inode |
| stores an extended attribute value and this field contains the upper 32 |
| bits of the attribute value's reference count. |
| |
| Hurd: |
| |
| .. list-table:: |
| :widths: 8 8 24 40 |
| :header-rows: 1 |
| |
| * - Offset |
| - Size |
| - Name |
| - Description |
| * - 0x0 |
| - \_\_le32 |
| - h\_i\_translator |
| - ?? |
| |
| Masix: |
| |
| .. list-table:: |
| :widths: 8 8 24 40 |
| :header-rows: 1 |
| |
| * - Offset |
| - Size |
| - Name |
| - Description |
| * - 0x0 |
| - \_\_le32 |
| - m\_i\_reserved |
| - ?? |
| |
| .. _i_osd2: |
| |
| The ``osd2`` field has multiple meanings depending on the filesystem creator: |
| |
| Linux: |
| |
| .. list-table:: |
| :widths: 8 8 24 40 |
| :header-rows: 1 |
| |
| * - Offset |
| - Size |
| - Name |
| - Description |
| * - 0x0 |
| - \_\_le16 |
| - l\_i\_blocks\_high |
| - Upper 16-bits of the block count. Please see the note attached to |
| i\_blocks\_lo. |
| * - 0x2 |
| - \_\_le16 |
| - l\_i\_file\_acl\_high |
| - Upper 16-bits of the extended attribute block (historically, the file |
| ACL location). See the Extended Attributes section below. |
| * - 0x4 |
| - \_\_le16 |
| - l\_i\_uid\_high |
| - Upper 16-bits of the Owner UID. |
| * - 0x6 |
| - \_\_le16 |
| - l\_i\_gid\_high |
| - Upper 16-bits of the GID. |
| * - 0x8 |
| - \_\_le16 |
| - l\_i\_checksum\_lo |
| - Lower 16-bits of the inode checksum. |
| * - 0xA |
| - \_\_le16 |
| - l\_i\_reserved |
| - Unused. |
| |
| Hurd: |
| |
| .. list-table:: |
| :widths: 8 8 24 40 |
| :header-rows: 1 |
| |
| * - Offset |
| - Size |
| - Name |
| - Description |
| * - 0x0 |
| - \_\_le16 |
| - h\_i\_reserved1 |
| - ?? |
| * - 0x2 |
| - \_\_u16 |
| - h\_i\_mode\_high |
| - Upper 16-bits of the file mode. |
| * - 0x4 |
| - \_\_le16 |
| - h\_i\_uid\_high |
| - Upper 16-bits of the Owner UID. |
| * - 0x6 |
| - \_\_le16 |
| - h\_i\_gid\_high |
| - Upper 16-bits of the GID. |
| * - 0x8 |
| - \_\_u32 |
| - h\_i\_author |
| - Author code? |
| |
| Masix: |
| |
| .. list-table:: |
| :widths: 8 8 24 40 |
| :header-rows: 1 |
| |
| * - Offset |
| - Size |
| - Name |
| - Description |
| * - 0x0 |
| - \_\_le16 |
| - h\_i\_reserved1 |
| - ?? |
| * - 0x2 |
| - \_\_u16 |
| - m\_i\_file\_acl\_high |
| - Upper 16-bits of the extended attribute block (historically, the file |
| ACL location). |
| * - 0x4 |
| - \_\_u32 |
| - m\_i\_reserved2[2] |
| - ?? |
| |
| Inode Size |
| ~~~~~~~~~~ |
| |
| In ext2 and ext3, the inode structure size was fixed at 128 bytes |
| (``EXT2_GOOD_OLD_INODE_SIZE``) and each inode had a disk record size of |
| 128 bytes. Starting with ext4, it is possible to allocate a larger |
| on-disk inode at format time for all inodes in the filesystem to provide |
| space beyond the end of the original ext2 inode. The on-disk inode |
| record size is recorded in the superblock as ``s_inode_size``. The |
| number of bytes actually used by struct ext4\_inode beyond the original |
| 128-byte ext2 inode is recorded in the ``i_extra_isize`` field for each |
| inode, which allows struct ext4\_inode to grow for a new kernel without |
| having to upgrade all of the on-disk inodes. Access to fields beyond |
| EXT2\_GOOD\_OLD\_INODE\_SIZE should be verified to be within |
| ``i_extra_isize``. By default, ext4 inode records are 256 bytes, and (as |
| of August 2019) the inode structure is 160 bytes |
| (``i_extra_isize = 32``). The extra space between the end of the inode |
| structure and the end of the inode record can be used to store extended |
| attributes. Each inode record can be as large as the filesystem block |
| size, though this is not terribly efficient. |
| |
| Finding an Inode |
| ~~~~~~~~~~~~~~~~ |
| |
| Each block group contains ``sb->s_inodes_per_group`` inodes. Because |
| inode 0 is defined not to exist, this formula can be used to find the |
| block group that an inode lives in: |
| ``bg = (inode_num - 1) / sb->s_inodes_per_group``. The particular inode |
| can be found within the block group's inode table at |
| ``index = (inode_num - 1) % sb->s_inodes_per_group``. To get the byte |
| address within the inode table, use |
| ``offset = index * sb->s_inode_size``. |
| |
| Inode Timestamps |
| ~~~~~~~~~~~~~~~~ |
| |
| Four timestamps are recorded in the lower 128 bytes of the inode |
| structure -- inode change time (ctime), access time (atime), data |
| modification time (mtime), and deletion time (dtime). The four fields |
| are 32-bit signed integers that represent seconds since the Unix epoch |
| (1970-01-01 00:00:00 GMT), which means that the fields will overflow in |
| January 2038. If the filesystem does not have orphan_file feature, inodes |
| that are not linked from any directory but are still open (orphan inodes) have |
| the dtime field overloaded for use with the orphan list. The superblock field |
| ``s_last_orphan`` points to the first inode in the orphan list; dtime is then |
| the number of the next orphaned inode, or zero if there are no more orphans. |
| |
| If the inode structure size ``sb->s_inode_size`` is larger than 128 |
| bytes and the ``i_inode_extra`` field is large enough to encompass the |
| respective ``i_[cma]time_extra`` field, the ctime, atime, and mtime |
| inode fields are widened to 64 bits. Within this “extra” 32-bit field, |
| the lower two bits are used to extend the 32-bit seconds field to be 34 |
| bit wide; the upper 30 bits are used to provide nanosecond timestamp |
| accuracy. Therefore, timestamps should not overflow until May 2446. |
| dtime was not widened. There is also a fifth timestamp to record inode |
| creation time (crtime); this field is 64-bits wide and decoded in the |
| same manner as 64-bit [cma]time. Neither crtime nor dtime are accessible |
| through the regular stat() interface, though debugfs will report them. |
| |
| We use the 32-bit signed time value plus (2^32 \* (extra epoch bits)). |
| In other words: |
| |
| .. list-table:: |
| :widths: 20 20 20 20 20 |
| :header-rows: 1 |
| |
| * - Extra epoch bits |
| - MSB of 32-bit time |
| - Adjustment for signed 32-bit to 64-bit tv\_sec |
| - Decoded 64-bit tv\_sec |
| - valid time range |
| * - 0 0 |
| - 1 |
| - 0 |
| - ``-0x80000000 - -0x00000001`` |
| - 1901-12-13 to 1969-12-31 |
| * - 0 0 |
| - 0 |
| - 0 |
| - ``0x000000000 - 0x07fffffff`` |
| - 1970-01-01 to 2038-01-19 |
| * - 0 1 |
| - 1 |
| - 0x100000000 |
| - ``0x080000000 - 0x0ffffffff`` |
| - 2038-01-19 to 2106-02-07 |
| * - 0 1 |
| - 0 |
| - 0x100000000 |
| - ``0x100000000 - 0x17fffffff`` |
| - 2106-02-07 to 2174-02-25 |
| * - 1 0 |
| - 1 |
| - 0x200000000 |
| - ``0x180000000 - 0x1ffffffff`` |
| - 2174-02-25 to 2242-03-16 |
| * - 1 0 |
| - 0 |
| - 0x200000000 |
| - ``0x200000000 - 0x27fffffff`` |
| - 2242-03-16 to 2310-04-04 |
| * - 1 1 |
| - 1 |
| - 0x300000000 |
| - ``0x280000000 - 0x2ffffffff`` |
| - 2310-04-04 to 2378-04-22 |
| * - 1 1 |
| - 0 |
| - 0x300000000 |
| - ``0x300000000 - 0x37fffffff`` |
| - 2378-04-22 to 2446-05-10 |
| |
| This is a somewhat odd encoding since there are effectively seven times |
| as many positive values as negative values. There have also been |
| long-standing bugs decoding and encoding dates beyond 2038, which don't |
| seem to be fixed as of kernel 3.12 and e2fsprogs 1.42.8. 64-bit kernels |
| incorrectly use the extra epoch bits 1,1 for dates between 1901 and |
| 1970. At some point the kernel will be fixed and e2fsck will fix this |
| situation, assuming that it is run before 2310. |
