| Kernel driver ir38064 |
| ===================== |
| |
| Supported chips: |
| |
| * Infineon IR38064 |
| |
| Prefix: 'ir38064' |
| Addresses scanned: - |
| |
| Datasheet: Publicly available at the Infineon webiste |
| https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca |
| |
| Authors: |
| - Maxim Sloyko <maxims@google.com> |
| - Patrick Venture <venture@google.com> |
| |
| Description |
| ----------- |
| |
| IR38064 is a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter. |
| |
| Usage Notes |
| ----------- |
| |
| This driver does not probe for PMBus devices. You will have to instantiate |
| devices explicitly. |
| |
| Sysfs attributes |
| ---------------- |
| |
| ======================= =========================== |
| curr1_label "iout1" |
| curr1_input Measured output current |
| curr1_crit Critical maximum current |
| curr1_crit_alarm Current critical high alarm |
| curr1_max Maximum current |
| curr1_max_alarm Current high alarm |
| |
| in1_label "vin" |
| in1_input Measured input voltage |
| in1_crit Critical maximum input voltage |
| in1_crit_alarm Input voltage critical high alarm |
| in1_min Minimum input voltage |
| in1_min_alarm Input voltage low alarm |
| |
| in2_label "vout1" |
| in2_input Measured output voltage |
| in2_lcrit Critical minimum output voltage |
| in2_lcrit_alarm Output voltage critical low alarm |
| in2_crit Critical maximum output voltage |
| in2_crit_alarm Output voltage critical high alarm |
| in2_max Maximum output voltage |
| in2_max_alarm Output voltage high alarm |
| in2_min Minimum output voltage |
| in2_min_alarm Output voltage low alarm |
| |
| power1_label "pout1" |
| power1_input Measured output power |
| |
| temp1_input Measured temperature |
| temp1_crit Critical high temperature |
| temp1_crit_alarm Chip temperature critical high alarm |
| temp1_max Maximum temperature |
| temp1_max_alarm Chip temperature high alarm |
| ======================= =========================== |
