| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ST Random Number Generator Driver ST's Platforms |
| * |
| * Author: Pankaj Dev: <pankaj.dev@st.com> |
| * Lee Jones <lee.jones@linaro.org> |
| * |
| * Copyright (C) 2015 STMicroelectronics (R&D) Limited |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/hw_random.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| /* Registers */ |
| #define ST_RNG_STATUS_REG 0x20 |
| #define ST_RNG_DATA_REG 0x24 |
| |
| /* Registers fields */ |
| #define ST_RNG_STATUS_BAD_SEQUENCE BIT(0) |
| #define ST_RNG_STATUS_BAD_ALTERNANCE BIT(1) |
| #define ST_RNG_STATUS_FIFO_FULL BIT(5) |
| |
| #define ST_RNG_SAMPLE_SIZE 2 /* 2 Byte (16bit) samples */ |
| #define ST_RNG_FIFO_DEPTH 4 |
| #define ST_RNG_FIFO_SIZE (ST_RNG_FIFO_DEPTH * ST_RNG_SAMPLE_SIZE) |
| |
| /* |
| * Samples are documented to be available every 0.667us, so in theory |
| * the 4 sample deep FIFO should take 2.668us to fill. However, during |
| * thorough testing, it became apparent that filling the FIFO actually |
| * takes closer to 12us. We then multiply by 2 in order to account for |
| * the lack of udelay()'s reliability, suggested by Russell King. |
| */ |
| #define ST_RNG_FILL_FIFO_TIMEOUT (12 * 2) |
| |
| struct st_rng_data { |
| void __iomem *base; |
| struct clk *clk; |
| struct hwrng ops; |
| }; |
| |
| static int st_rng_read(struct hwrng *rng, void *data, size_t max, bool wait) |
| { |
| struct st_rng_data *ddata = (struct st_rng_data *)rng->priv; |
| u32 status; |
| int i; |
| |
| /* Wait until FIFO is full - max 4uS*/ |
| for (i = 0; i < ST_RNG_FILL_FIFO_TIMEOUT; i++) { |
| status = readl_relaxed(ddata->base + ST_RNG_STATUS_REG); |
| if (status & ST_RNG_STATUS_FIFO_FULL) |
| break; |
| udelay(1); |
| } |
| |
| if (i == ST_RNG_FILL_FIFO_TIMEOUT) |
| return 0; |
| |
| for (i = 0; i < ST_RNG_FIFO_SIZE && i < max; i += 2) |
| *(u16 *)(data + i) = |
| readl_relaxed(ddata->base + ST_RNG_DATA_REG); |
| |
| return i; /* No of bytes read */ |
| } |
| |
| static int st_rng_probe(struct platform_device *pdev) |
| { |
| struct st_rng_data *ddata; |
| struct clk *clk; |
| void __iomem *base; |
| int ret; |
| |
| ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); |
| if (!ddata) |
| return -ENOMEM; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) |
| return ret; |
| |
| ddata->ops.priv = (unsigned long)ddata; |
| ddata->ops.read = st_rng_read; |
| ddata->ops.name = pdev->name; |
| ddata->base = base; |
| ddata->clk = clk; |
| |
| dev_set_drvdata(&pdev->dev, ddata); |
| |
| ret = devm_hwrng_register(&pdev->dev, &ddata->ops); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to register HW RNG\n"); |
| clk_disable_unprepare(clk); |
| return ret; |
| } |
| |
| dev_info(&pdev->dev, "Successfully registered HW RNG\n"); |
| |
| return 0; |
| } |
| |
| static int st_rng_remove(struct platform_device *pdev) |
| { |
| struct st_rng_data *ddata = dev_get_drvdata(&pdev->dev); |
| |
| clk_disable_unprepare(ddata->clk); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id st_rng_match[] __maybe_unused = { |
| { .compatible = "st,rng" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, st_rng_match); |
| |
| static struct platform_driver st_rng_driver = { |
| .driver = { |
| .name = "st-hwrandom", |
| .of_match_table = of_match_ptr(st_rng_match), |
| }, |
| .probe = st_rng_probe, |
| .remove = st_rng_remove |
| }; |
| |
| module_platform_driver(st_rng_driver); |
| |
| MODULE_AUTHOR("Pankaj Dev <pankaj.dev@st.com>"); |
| MODULE_LICENSE("GPL v2"); |