| /* |
| * Copyright (c) 2012 Intel Corporation. All rights reserved. |
| * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved. |
| * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| /* |
| * This file is conditionally built on x86_64 only. Otherwise weak symbol |
| * versions of the functions exported from here are used. |
| */ |
| |
| #include <linux/pci.h> |
| #include <asm/mtrr.h> |
| #include <asm/processor.h> |
| |
| #include "qib.h" |
| |
| /** |
| * qib_enable_wc - enable write combining for MMIO writes to the device |
| * @dd: qlogic_ib device |
| * |
| * This routine is x86_64-specific; it twiddles the CPU's MTRRs to enable |
| * write combining. |
| */ |
| int qib_enable_wc(struct qib_devdata *dd) |
| { |
| int ret = 0; |
| u64 pioaddr, piolen; |
| unsigned bits; |
| const unsigned long addr = pci_resource_start(dd->pcidev, 0); |
| const size_t len = pci_resource_len(dd->pcidev, 0); |
| |
| /* |
| * Set the PIO buffers to be WCCOMB, so we get HT bursts to the |
| * chip. Linux (possibly the hardware) requires it to be on a power |
| * of 2 address matching the length (which has to be a power of 2). |
| * For rev1, that means the base address, for rev2, it will be just |
| * the PIO buffers themselves. |
| * For chips with two sets of buffers, the calculations are |
| * somewhat more complicated; we need to sum, and the piobufbase |
| * register has both offsets, 2K in low 32 bits, 4K in high 32 bits. |
| * The buffers are still packed, so a single range covers both. |
| */ |
| if (dd->piobcnt2k && dd->piobcnt4k) { |
| /* 2 sizes for chip */ |
| unsigned long pio2kbase, pio4kbase; |
| |
| pio2kbase = dd->piobufbase & 0xffffffffUL; |
| pio4kbase = (dd->piobufbase >> 32) & 0xffffffffUL; |
| if (pio2kbase < pio4kbase) { |
| /* all current chips */ |
| pioaddr = addr + pio2kbase; |
| piolen = pio4kbase - pio2kbase + |
| dd->piobcnt4k * dd->align4k; |
| } else { |
| pioaddr = addr + pio4kbase; |
| piolen = pio2kbase - pio4kbase + |
| dd->piobcnt2k * dd->palign; |
| } |
| } else { /* single buffer size (2K, currently) */ |
| pioaddr = addr + dd->piobufbase; |
| piolen = dd->piobcnt2k * dd->palign + |
| dd->piobcnt4k * dd->align4k; |
| } |
| |
| for (bits = 0; !(piolen & (1ULL << bits)); bits++) |
| ; /* do nothing */ |
| |
| if (piolen != (1ULL << bits)) { |
| piolen >>= bits; |
| while (piolen >>= 1) |
| bits++; |
| piolen = 1ULL << (bits + 1); |
| } |
| if (pioaddr & (piolen - 1)) { |
| u64 atmp = pioaddr & ~(piolen - 1); |
| |
| if (atmp < addr || (atmp + piolen) > (addr + len)) { |
| qib_dev_err(dd, |
| "No way to align address/size (%llx/%llx), no WC mtrr\n", |
| (unsigned long long) atmp, |
| (unsigned long long) piolen << 1); |
| ret = -ENODEV; |
| } else { |
| pioaddr = atmp; |
| piolen <<= 1; |
| } |
| } |
| |
| if (!ret) { |
| dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen); |
| if (dd->wc_cookie < 0) |
| /* use error from routine */ |
| ret = dd->wc_cookie; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * qib_disable_wc - disable write combining for MMIO writes to the device |
| * @dd: qlogic_ib device |
| */ |
| void qib_disable_wc(struct qib_devdata *dd) |
| { |
| arch_phys_wc_del(dd->wc_cookie); |
| } |
| |
| /** |
| * qib_unordered_wc - indicate whether write combining is ordered |
| * |
| * Because our performance depends on our ability to do write combining mmio |
| * writes in the most efficient way, we need to know if we are on an Intel |
| * or AMD x86_64 processor. AMD x86_64 processors flush WC buffers out in |
| * the order completed, and so no special flushing is required to get |
| * correct ordering. Intel processors, however, will flush write buffers |
| * out in "random" orders, and so explicit ordering is needed at times. |
| */ |
| int qib_unordered_wc(void) |
| { |
| return boot_cpu_data.x86_vendor != X86_VENDOR_AMD; |
| } |