| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018 MediaTek Inc. |
| * |
| * Author: Sean Wang <sean.wang@mediatek.com> |
| * |
| */ |
| |
| #include <dt-bindings/pinctrl/mt65xx.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_irq.h> |
| |
| #include "mtk-eint.h" |
| #include "pinctrl-mtk-common-v2.h" |
| |
| /** |
| * struct mtk_drive_desc - the structure that holds the information |
| * of the driving current |
| * @min: the minimum current of this group |
| * @max: the maximum current of this group |
| * @step: the step current of this group |
| * @scal: the weight factor |
| * |
| * formula: output = ((input) / step - 1) * scal |
| */ |
| struct mtk_drive_desc { |
| u8 min; |
| u8 max; |
| u8 step; |
| u8 scal; |
| }; |
| |
| /* The groups of drive strength */ |
| static const struct mtk_drive_desc mtk_drive[] = { |
| [DRV_GRP0] = { 4, 16, 4, 1 }, |
| [DRV_GRP1] = { 4, 16, 4, 2 }, |
| [DRV_GRP2] = { 2, 8, 2, 1 }, |
| [DRV_GRP3] = { 2, 8, 2, 2 }, |
| [DRV_GRP4] = { 2, 16, 2, 1 }, |
| }; |
| |
| static void mtk_w32(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 val) |
| { |
| writel_relaxed(val, pctl->base[i] + reg); |
| } |
| |
| static u32 mtk_r32(struct mtk_pinctrl *pctl, u8 i, u32 reg) |
| { |
| return readl_relaxed(pctl->base[i] + reg); |
| } |
| |
| void mtk_rmw(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 mask, u32 set) |
| { |
| u32 val; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pctl->lock, flags); |
| |
| val = mtk_r32(pctl, i, reg); |
| val &= ~mask; |
| val |= set; |
| mtk_w32(pctl, i, reg, val); |
| |
| spin_unlock_irqrestore(&pctl->lock, flags); |
| } |
| |
| static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| int field, struct mtk_pin_field *pfd) |
| { |
| const struct mtk_pin_field_calc *c; |
| const struct mtk_pin_reg_calc *rc; |
| int start = 0, end, check; |
| bool found = false; |
| u32 bits; |
| |
| if (hw->soc->reg_cal && hw->soc->reg_cal[field].range) { |
| rc = &hw->soc->reg_cal[field]; |
| } else { |
| dev_dbg(hw->dev, |
| "Not support field %d for this soc\n", field); |
| return -ENOTSUPP; |
| } |
| |
| end = rc->nranges - 1; |
| |
| while (start <= end) { |
| check = (start + end) >> 1; |
| if (desc->number >= rc->range[check].s_pin |
| && desc->number <= rc->range[check].e_pin) { |
| found = true; |
| break; |
| } else if (start == end) |
| break; |
| else if (desc->number < rc->range[check].s_pin) |
| end = check - 1; |
| else |
| start = check + 1; |
| } |
| |
| if (!found) { |
| dev_dbg(hw->dev, "Not support field %d for pin = %d (%s)\n", |
| field, desc->number, desc->name); |
| return -ENOTSUPP; |
| } |
| |
| c = rc->range + check; |
| |
| if (c->i_base > hw->nbase - 1) { |
| dev_err(hw->dev, |
| "Invalid base for field %d for pin = %d (%s)\n", |
| field, desc->number, desc->name); |
| return -EINVAL; |
| } |
| |
| /* Calculated bits as the overall offset the pin is located at, |
| * if c->fixed is held, that determines the all the pins in the |
| * range use the same field with the s_pin. |
| */ |
| bits = c->fixed ? c->s_bit : c->s_bit + |
| (desc->number - c->s_pin) * (c->x_bits); |
| |
| /* Fill pfd from bits. For example 32-bit register applied is assumed |
| * when c->sz_reg is equal to 32. |
| */ |
| pfd->index = c->i_base; |
| pfd->offset = c->s_addr + c->x_addrs * (bits / c->sz_reg); |
| pfd->bitpos = bits % c->sz_reg; |
| pfd->mask = (1 << c->x_bits) - 1; |
| |
| /* pfd->next is used for indicating that bit wrapping-around happens |
| * which requires the manipulation for bit 0 starting in the next |
| * register to form the complete field read/write. |
| */ |
| pfd->next = pfd->bitpos + c->x_bits > c->sz_reg ? c->x_addrs : 0; |
| |
| return 0; |
| } |
| |
| static int mtk_hw_pin_field_get(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| int field, struct mtk_pin_field *pfd) |
| { |
| if (field < 0 || field >= PINCTRL_PIN_REG_MAX) { |
| dev_err(hw->dev, "Invalid Field %d\n", field); |
| return -EINVAL; |
| } |
| |
| return mtk_hw_pin_field_lookup(hw, desc, field, pfd); |
| } |
| |
| static void mtk_hw_bits_part(struct mtk_pin_field *pf, int *h, int *l) |
| { |
| *l = 32 - pf->bitpos; |
| *h = get_count_order(pf->mask) - *l; |
| } |
| |
| static void mtk_hw_write_cross_field(struct mtk_pinctrl *hw, |
| struct mtk_pin_field *pf, int value) |
| { |
| int nbits_l, nbits_h; |
| |
| mtk_hw_bits_part(pf, &nbits_h, &nbits_l); |
| |
| mtk_rmw(hw, pf->index, pf->offset, pf->mask << pf->bitpos, |
| (value & pf->mask) << pf->bitpos); |
| |
| mtk_rmw(hw, pf->index, pf->offset + pf->next, BIT(nbits_h) - 1, |
| (value & pf->mask) >> nbits_l); |
| } |
| |
| static void mtk_hw_read_cross_field(struct mtk_pinctrl *hw, |
| struct mtk_pin_field *pf, int *value) |
| { |
| int nbits_l, nbits_h, h, l; |
| |
| mtk_hw_bits_part(pf, &nbits_h, &nbits_l); |
| |
| l = (mtk_r32(hw, pf->index, pf->offset) |
| >> pf->bitpos) & (BIT(nbits_l) - 1); |
| h = (mtk_r32(hw, pf->index, pf->offset + pf->next)) |
| & (BIT(nbits_h) - 1); |
| |
| *value = (h << nbits_l) | l; |
| } |
| |
| int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc, |
| int field, int value) |
| { |
| struct mtk_pin_field pf; |
| int err; |
| |
| err = mtk_hw_pin_field_get(hw, desc, field, &pf); |
| if (err) |
| return err; |
| |
| if (value < 0 || value > pf.mask) |
| return -EINVAL; |
| |
| if (!pf.next) |
| mtk_rmw(hw, pf.index, pf.offset, pf.mask << pf.bitpos, |
| (value & pf.mask) << pf.bitpos); |
| else |
| mtk_hw_write_cross_field(hw, &pf, value); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_hw_set_value); |
| |
| int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc, |
| int field, int *value) |
| { |
| struct mtk_pin_field pf; |
| int err; |
| |
| err = mtk_hw_pin_field_get(hw, desc, field, &pf); |
| if (err) |
| return err; |
| |
| if (!pf.next) |
| *value = (mtk_r32(hw, pf.index, pf.offset) |
| >> pf.bitpos) & pf.mask; |
| else |
| mtk_hw_read_cross_field(hw, &pf, value); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_hw_get_value); |
| |
| static int mtk_xt_find_eint_num(struct mtk_pinctrl *hw, unsigned long eint_n) |
| { |
| const struct mtk_pin_desc *desc; |
| int i = 0; |
| |
| desc = (const struct mtk_pin_desc *)hw->soc->pins; |
| |
| while (i < hw->soc->npins) { |
| if (desc[i].eint.eint_n == eint_n) |
| return desc[i].number; |
| i++; |
| } |
| |
| return EINT_NA; |
| } |
| |
| /* |
| * Virtual GPIO only used inside SOC and not being exported to outside SOC. |
| * Some modules use virtual GPIO as eint (e.g. pmif or usb). |
| * In MTK platform, external interrupt (EINT) and GPIO is 1-1 mapping |
| * and we can set GPIO as eint. |
| * But some modules use specific eint which doesn't have real GPIO pin. |
| * So we use virtual GPIO to map it. |
| */ |
| |
| bool mtk_is_virt_gpio(struct mtk_pinctrl *hw, unsigned int gpio_n) |
| { |
| const struct mtk_pin_desc *desc; |
| bool virt_gpio = false; |
| |
| desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n]; |
| |
| /* if the GPIO is not supported for eint mode */ |
| if (desc->eint.eint_m == NO_EINT_SUPPORT) |
| return virt_gpio; |
| |
| if (desc->funcs && !desc->funcs[desc->eint.eint_m].name) |
| virt_gpio = true; |
| |
| return virt_gpio; |
| } |
| EXPORT_SYMBOL_GPL(mtk_is_virt_gpio); |
| |
| static int mtk_xt_get_gpio_n(void *data, unsigned long eint_n, |
| unsigned int *gpio_n, |
| struct gpio_chip **gpio_chip) |
| { |
| struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data; |
| const struct mtk_pin_desc *desc; |
| |
| desc = (const struct mtk_pin_desc *)hw->soc->pins; |
| *gpio_chip = &hw->chip; |
| |
| /* Be greedy to guess first gpio_n is equal to eint_n */ |
| if (desc[eint_n].eint.eint_n == eint_n) |
| *gpio_n = eint_n; |
| else |
| *gpio_n = mtk_xt_find_eint_num(hw, eint_n); |
| |
| return *gpio_n == EINT_NA ? -EINVAL : 0; |
| } |
| |
| static int mtk_xt_get_gpio_state(void *data, unsigned long eint_n) |
| { |
| struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data; |
| const struct mtk_pin_desc *desc; |
| struct gpio_chip *gpio_chip; |
| unsigned int gpio_n; |
| int value, err; |
| |
| err = mtk_xt_get_gpio_n(hw, eint_n, &gpio_n, &gpio_chip); |
| if (err) |
| return err; |
| |
| desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n]; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value); |
| if (err) |
| return err; |
| |
| return !!value; |
| } |
| |
| static int mtk_xt_set_gpio_as_eint(void *data, unsigned long eint_n) |
| { |
| struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data; |
| const struct mtk_pin_desc *desc; |
| struct gpio_chip *gpio_chip; |
| unsigned int gpio_n; |
| int err; |
| |
| err = mtk_xt_get_gpio_n(hw, eint_n, &gpio_n, &gpio_chip); |
| if (err) |
| return err; |
| |
| if (mtk_is_virt_gpio(hw, gpio_n)) |
| return 0; |
| |
| desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n]; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE, |
| desc->eint.eint_m); |
| if (err) |
| return err; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, MTK_INPUT); |
| if (err) |
| return err; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, MTK_ENABLE); |
| /* SMT is supposed to be supported by every real GPIO and doesn't |
| * support virtual GPIOs, so the extra condition err != -ENOTSUPP |
| * is just for adding EINT support to these virtual GPIOs. It should |
| * add an extra flag in the pin descriptor when more pins with |
| * distinctive characteristic come out. |
| */ |
| if (err && err != -ENOTSUPP) |
| return err; |
| |
| return 0; |
| } |
| |
| static const struct mtk_eint_xt mtk_eint_xt = { |
| .get_gpio_n = mtk_xt_get_gpio_n, |
| .get_gpio_state = mtk_xt_get_gpio_state, |
| .set_gpio_as_eint = mtk_xt_set_gpio_as_eint, |
| }; |
| |
| int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| int ret; |
| |
| if (!IS_ENABLED(CONFIG_EINT_MTK)) |
| return 0; |
| |
| if (!of_property_read_bool(np, "interrupt-controller")) |
| return -ENODEV; |
| |
| hw->eint = devm_kzalloc(hw->dev, sizeof(*hw->eint), GFP_KERNEL); |
| if (!hw->eint) |
| return -ENOMEM; |
| |
| hw->eint->base = devm_platform_ioremap_resource_byname(pdev, "eint"); |
| if (IS_ERR(hw->eint->base)) { |
| ret = PTR_ERR(hw->eint->base); |
| goto err_free_eint; |
| } |
| |
| hw->eint->irq = irq_of_parse_and_map(np, 0); |
| if (!hw->eint->irq) { |
| ret = -EINVAL; |
| goto err_free_eint; |
| } |
| |
| if (!hw->soc->eint_hw) { |
| ret = -ENODEV; |
| goto err_free_eint; |
| } |
| |
| hw->eint->dev = &pdev->dev; |
| hw->eint->hw = hw->soc->eint_hw; |
| hw->eint->pctl = hw; |
| hw->eint->gpio_xlate = &mtk_eint_xt; |
| |
| return mtk_eint_do_init(hw->eint); |
| |
| err_free_eint: |
| devm_kfree(hw->dev, hw->eint); |
| hw->eint = NULL; |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(mtk_build_eint); |
| |
| /* Revision 0 */ |
| int mtk_pinconf_bias_disable_set(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc) |
| { |
| int err; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PU, |
| MTK_DISABLE); |
| if (err) |
| return err; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD, |
| MTK_DISABLE); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_set); |
| |
| int mtk_pinconf_bias_disable_get(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, int *res) |
| { |
| int v, v2; |
| int err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &v); |
| if (err) |
| return err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &v2); |
| if (err) |
| return err; |
| |
| if (v == MTK_ENABLE || v2 == MTK_ENABLE) |
| return -EINVAL; |
| |
| *res = 1; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_get); |
| |
| int mtk_pinconf_bias_set(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, bool pullup) |
| { |
| int err, arg; |
| |
| arg = pullup ? 1 : 2; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PU, arg & 1); |
| if (err) |
| return err; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD, |
| !!(arg & 2)); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set); |
| |
| int mtk_pinconf_bias_get(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, bool pullup, int *res) |
| { |
| int reg, err, v; |
| |
| reg = pullup ? PINCTRL_PIN_REG_PU : PINCTRL_PIN_REG_PD; |
| |
| err = mtk_hw_get_value(hw, desc, reg, &v); |
| if (err) |
| return err; |
| |
| if (!v) |
| return -EINVAL; |
| |
| *res = 1; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get); |
| |
| /* Revision 1 */ |
| int mtk_pinconf_bias_disable_set_rev1(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc) |
| { |
| return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLEN, |
| MTK_DISABLE); |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_set_rev1); |
| |
| int mtk_pinconf_bias_disable_get_rev1(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, int *res) |
| { |
| int v, err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLEN, &v); |
| if (err) |
| return err; |
| |
| if (v == MTK_ENABLE) |
| return -EINVAL; |
| |
| *res = 1; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_disable_get_rev1); |
| |
| int mtk_pinconf_bias_set_rev1(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, bool pullup) |
| { |
| int err, arg; |
| |
| arg = pullup ? MTK_PULLUP : MTK_PULLDOWN; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLEN, |
| MTK_ENABLE); |
| if (err) |
| return err; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, arg); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_rev1); |
| |
| int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, bool pullup, |
| int *res) |
| { |
| int err, v; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLEN, &v); |
| if (err) |
| return err; |
| |
| if (v == MTK_DISABLE) |
| return -EINVAL; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, &v); |
| if (err) |
| return err; |
| |
| if (pullup ^ (v == MTK_PULLUP)) |
| return -EINVAL; |
| |
| *res = 1; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_rev1); |
| |
| /* Combo for the following pull register type: |
| * 1. PU + PD |
| * 2. PULLSEL + PULLEN |
| * 3. PUPD + R0 + R1 |
| */ |
| static int mtk_pinconf_bias_set_pu_pd(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| u32 pullup, u32 arg) |
| { |
| int err, pu, pd; |
| |
| if (arg == MTK_DISABLE) { |
| pu = 0; |
| pd = 0; |
| } else if ((arg == MTK_ENABLE) && pullup) { |
| pu = 1; |
| pd = 0; |
| } else if ((arg == MTK_ENABLE) && !pullup) { |
| pu = 0; |
| pd = 1; |
| } else { |
| err = -EINVAL; |
| goto out; |
| } |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PU, pu); |
| if (err) |
| goto out; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD, pd); |
| |
| out: |
| return err; |
| } |
| |
| static int mtk_pinconf_bias_set_pullsel_pullen(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| u32 pullup, u32 arg) |
| { |
| int err, enable; |
| |
| if (arg == MTK_DISABLE) |
| enable = 0; |
| else if (arg == MTK_ENABLE) |
| enable = 1; |
| else { |
| err = -EINVAL; |
| goto out; |
| } |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLEN, enable); |
| if (err) |
| goto out; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, pullup); |
| |
| out: |
| return err; |
| } |
| |
| static int mtk_pinconf_bias_set_pupd_r1_r0(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| u32 pullup, u32 arg) |
| { |
| int err, r0, r1; |
| |
| if ((arg == MTK_DISABLE) || (arg == MTK_PUPD_SET_R1R0_00)) { |
| pullup = 0; |
| r0 = 0; |
| r1 = 0; |
| } else if (arg == MTK_PUPD_SET_R1R0_01) { |
| r0 = 1; |
| r1 = 0; |
| } else if (arg == MTK_PUPD_SET_R1R0_10) { |
| r0 = 0; |
| r1 = 1; |
| } else if (arg == MTK_PUPD_SET_R1R0_11) { |
| r0 = 1; |
| r1 = 1; |
| } else { |
| err = -EINVAL; |
| goto out; |
| } |
| |
| /* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */ |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PUPD, !pullup); |
| if (err) |
| goto out; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R0, r0); |
| if (err) |
| goto out; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R1, r1); |
| |
| out: |
| return err; |
| } |
| |
| static int mtk_pinconf_bias_get_pu_pd(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| u32 *pullup, u32 *enable) |
| { |
| int err, pu, pd; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &pu); |
| if (err) |
| goto out; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd); |
| if (err) |
| goto out; |
| |
| if (pu == 0 && pd == 0) { |
| *pullup = 0; |
| *enable = MTK_DISABLE; |
| } else if (pu == 1 && pd == 0) { |
| *pullup = 1; |
| *enable = MTK_ENABLE; |
| } else if (pu == 0 && pd == 1) { |
| *pullup = 0; |
| *enable = MTK_ENABLE; |
| } else |
| err = -EINVAL; |
| |
| out: |
| return err; |
| } |
| |
| static int mtk_pinconf_bias_get_pullsel_pullen(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| u32 *pullup, u32 *enable) |
| { |
| int err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, pullup); |
| if (err) |
| goto out; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLEN, enable); |
| |
| out: |
| return err; |
| } |
| |
| static int mtk_pinconf_bias_get_pupd_r1_r0(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| u32 *pullup, u32 *enable) |
| { |
| int err, r0, r1; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PUPD, pullup); |
| if (err) |
| goto out; |
| /* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */ |
| *pullup = !(*pullup); |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R0, &r0); |
| if (err) |
| goto out; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R1, &r1); |
| if (err) |
| goto out; |
| |
| if ((r1 == 0) && (r0 == 0)) |
| *enable = MTK_PUPD_SET_R1R0_00; |
| else if ((r1 == 0) && (r0 == 1)) |
| *enable = MTK_PUPD_SET_R1R0_01; |
| else if ((r1 == 1) && (r0 == 0)) |
| *enable = MTK_PUPD_SET_R1R0_10; |
| else if ((r1 == 1) && (r0 == 1)) |
| *enable = MTK_PUPD_SET_R1R0_11; |
| else |
| err = -EINVAL; |
| |
| out: |
| return err; |
| } |
| |
| int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| u32 pullup, u32 arg) |
| { |
| int err; |
| |
| err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg); |
| if (!err) |
| goto out; |
| |
| err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc, pullup, arg); |
| if (!err) |
| goto out; |
| |
| err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg); |
| |
| out: |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo); |
| |
| int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, |
| u32 *pullup, u32 *enable) |
| { |
| int err; |
| |
| err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable); |
| if (!err) |
| goto out; |
| |
| err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc, pullup, enable); |
| if (!err) |
| goto out; |
| |
| err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable); |
| |
| out: |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_combo); |
| |
| /* Revision 0 */ |
| int mtk_pinconf_drive_set(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, u32 arg) |
| { |
| const struct mtk_drive_desc *tb; |
| int err = -ENOTSUPP; |
| |
| tb = &mtk_drive[desc->drv_n]; |
| /* 4mA when (e8, e4) = (0, 0) |
| * 8mA when (e8, e4) = (0, 1) |
| * 12mA when (e8, e4) = (1, 0) |
| * 16mA when (e8, e4) = (1, 1) |
| */ |
| if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) { |
| arg = (arg / tb->step - 1) * tb->scal; |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_E4, |
| arg & 0x1); |
| if (err) |
| return err; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_E8, |
| (arg & 0x2) >> 1); |
| if (err) |
| return err; |
| } |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_drive_set); |
| |
| int mtk_pinconf_drive_get(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, int *val) |
| { |
| const struct mtk_drive_desc *tb; |
| int err, val1, val2; |
| |
| tb = &mtk_drive[desc->drv_n]; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_E4, &val1); |
| if (err) |
| return err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_E8, &val2); |
| if (err) |
| return err; |
| |
| /* 4mA when (e8, e4) = (0, 0); 8mA when (e8, e4) = (0, 1) |
| * 12mA when (e8, e4) = (1, 0); 16mA when (e8, e4) = (1, 1) |
| */ |
| *val = (((val2 << 1) + val1) / tb->scal + 1) * tb->step; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_drive_get); |
| |
| /* Revision 1 */ |
| int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, u32 arg) |
| { |
| const struct mtk_drive_desc *tb; |
| int err = -ENOTSUPP; |
| |
| tb = &mtk_drive[desc->drv_n]; |
| |
| if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) { |
| arg = (arg / tb->step - 1) * tb->scal; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV, |
| arg); |
| if (err) |
| return err; |
| } |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_drive_set_rev1); |
| |
| int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, int *val) |
| { |
| const struct mtk_drive_desc *tb; |
| int err, val1; |
| |
| tb = &mtk_drive[desc->drv_n]; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, &val1); |
| if (err) |
| return err; |
| |
| *val = ((val1 & 0x7) / tb->scal + 1) * tb->step; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_drive_get_rev1); |
| |
| int mtk_pinconf_drive_set_raw(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, u32 arg) |
| { |
| return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV, arg); |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_drive_set_raw); |
| |
| int mtk_pinconf_drive_get_raw(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, int *val) |
| { |
| return mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, val); |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_drive_get_raw); |
| |
| int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, bool pullup, |
| u32 arg) |
| { |
| int err; |
| |
| /* 10K off & 50K (75K) off, when (R0, R1) = (0, 0); |
| * 10K off & 50K (75K) on, when (R0, R1) = (0, 1); |
| * 10K on & 50K (75K) off, when (R0, R1) = (1, 0); |
| * 10K on & 50K (75K) on, when (R0, R1) = (1, 1) |
| */ |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R0, arg & 1); |
| if (err) |
| return 0; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R1, |
| !!(arg & 2)); |
| if (err) |
| return 0; |
| |
| arg = pullup ? 0 : 1; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PUPD, arg); |
| |
| /* If PUPD register is not supported for that pin, let's fallback to |
| * general bias control. |
| */ |
| if (err == -ENOTSUPP) { |
| if (hw->soc->bias_set) { |
| err = hw->soc->bias_set(hw, desc, pullup); |
| if (err) |
| return err; |
| } else { |
| err = mtk_pinconf_bias_set_rev1(hw, desc, pullup); |
| if (err) |
| err = mtk_pinconf_bias_set(hw, desc, pullup); |
| } |
| } |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_adv_pull_set); |
| |
| int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, bool pullup, |
| u32 *val) |
| { |
| u32 t, t2; |
| int err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PUPD, &t); |
| |
| /* If PUPD register is not supported for that pin, let's fallback to |
| * general bias control. |
| */ |
| if (err == -ENOTSUPP) { |
| if (hw->soc->bias_get) { |
| err = hw->soc->bias_get(hw, desc, pullup, val); |
| if (err) |
| return err; |
| } else { |
| return -ENOTSUPP; |
| } |
| } else { |
| /* t == 0 supposes PULLUP for the customized PULL setup */ |
| if (err) |
| return err; |
| |
| if (pullup ^ !t) |
| return -EINVAL; |
| } |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R0, &t); |
| if (err) |
| return err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R1, &t2); |
| if (err) |
| return err; |
| |
| *val = (t | t2 << 1) & 0x7; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_adv_pull_get); |
| |
| int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, u32 arg) |
| { |
| int err; |
| int en = arg & 1; |
| int e0 = !!(arg & 2); |
| int e1 = !!(arg & 4); |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, en); |
| if (err) |
| return err; |
| |
| if (!en) |
| return err; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, e0); |
| if (err) |
| return err; |
| |
| err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, e1); |
| if (err) |
| return err; |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_set); |
| |
| int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, u32 *val) |
| { |
| u32 en, e0, e1; |
| int err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en); |
| if (err) |
| return err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0); |
| if (err) |
| return err; |
| |
| err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1); |
| if (err) |
| return err; |
| |
| *val = (en | e0 << 1 | e1 << 2) & 0x7; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_get); |
| |
| int mtk_pinconf_adv_drive_set_raw(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, u32 arg) |
| { |
| return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_ADV, arg); |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_set_raw); |
| |
| int mtk_pinconf_adv_drive_get_raw(struct mtk_pinctrl *hw, |
| const struct mtk_pin_desc *desc, u32 *val) |
| { |
| return mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_ADV, val); |
| } |
| EXPORT_SYMBOL_GPL(mtk_pinconf_adv_drive_get_raw); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); |
| MODULE_DESCRIPTION("Pin configuration library module for mediatek SoCs"); |