| /* |
| * Second generation of pinmux driver for Amlogic Meson-AXG SoC. |
| * |
| * Copyright (c) 2017 Baylibre SAS. |
| * Author: Jerome Brunet <jbrunet@baylibre.com> |
| * |
| * Copyright (c) 2017 Amlogic, Inc. All rights reserved. |
| * Author: Xingyu Chen <xingyu.chen@amlogic.com> |
| * |
| * SPDX-License-Identifier: (GPL-2.0+ or MIT) |
| */ |
| |
| /* |
| * This new generation of pinctrl IP is mainly adopted by the |
| * Meson-AXG SoC and later series, which use 4-width continuous |
| * register bit to select the function for each pin. |
| * |
| * The value 0 is always selecting the GPIO mode, while other |
| * values (start from 1) for selecting the function mode. |
| */ |
| #include <linux/device.h> |
| #include <linux/regmap.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinmux.h> |
| |
| #include "pinctrl-meson.h" |
| #include "pinctrl-meson-axg-pmx.h" |
| |
| static int meson_axg_pmx_get_bank(struct meson_pinctrl *pc, |
| unsigned int pin, |
| struct meson_pmx_bank **bank) |
| { |
| int i; |
| struct meson_axg_pmx_data *pmx = pc->data->pmx_data; |
| |
| for (i = 0; i < pmx->num_pmx_banks; i++) |
| if (pin >= pmx->pmx_banks[i].first && |
| pin <= pmx->pmx_banks[i].last) { |
| *bank = &pmx->pmx_banks[i]; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int meson_pmx_calc_reg_and_offset(struct meson_pmx_bank *bank, |
| unsigned int pin, unsigned int *reg, |
| unsigned int *offset) |
| { |
| int shift; |
| |
| shift = pin - bank->first; |
| |
| *reg = bank->reg + (bank->offset + (shift << 2)) / 32; |
| *offset = (bank->offset + (shift << 2)) % 32; |
| |
| return 0; |
| } |
| |
| static int meson_axg_pmx_update_function(struct meson_pinctrl *pc, |
| unsigned int pin, unsigned int func) |
| { |
| int ret; |
| int reg; |
| int offset; |
| struct meson_pmx_bank *bank; |
| |
| ret = meson_axg_pmx_get_bank(pc, pin, &bank); |
| if (ret) |
| return ret; |
| |
| meson_pmx_calc_reg_and_offset(bank, pin, ®, &offset); |
| |
| ret = regmap_update_bits(pc->reg_mux, reg << 2, |
| 0xf << offset, (func & 0xf) << offset); |
| |
| return ret; |
| } |
| |
| static int meson_axg_pmx_set_mux(struct pinctrl_dev *pcdev, |
| unsigned int func_num, unsigned int group_num) |
| { |
| int i; |
| int ret; |
| struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev); |
| struct meson_pmx_func *func = &pc->data->funcs[func_num]; |
| struct meson_pmx_group *group = &pc->data->groups[group_num]; |
| struct meson_pmx_axg_data *pmx_data = |
| (struct meson_pmx_axg_data *)group->data; |
| |
| dev_dbg(pc->dev, "enable function %s, group %s\n", func->name, |
| group->name); |
| |
| for (i = 0; i < group->num_pins; i++) { |
| ret = meson_axg_pmx_update_function(pc, group->pins[i], |
| pmx_data->func); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int meson_axg_pmx_request_gpio(struct pinctrl_dev *pcdev, |
| struct pinctrl_gpio_range *range, unsigned int offset) |
| { |
| struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev); |
| |
| return meson_axg_pmx_update_function(pc, offset, 0); |
| } |
| |
| const struct pinmux_ops meson_axg_pmx_ops = { |
| .set_mux = meson_axg_pmx_set_mux, |
| .get_functions_count = meson_pmx_get_funcs_count, |
| .get_function_name = meson_pmx_get_func_name, |
| .get_function_groups = meson_pmx_get_groups, |
| .gpio_request_enable = meson_axg_pmx_request_gpio, |
| }; |
| EXPORT_SYMBOL_GPL(meson_axg_pmx_ops); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |