blob: 380cea311a2be685cc793ce71046ee1022b848a6 [file] [log] [blame]
/*
* Copyright 2012 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Alex Deucher
*/
#ifndef CIK_H
#define CIK_H
#define BONAIRE_GB_ADDR_CONFIG_GOLDEN 0x12010001
#define CIK_RB_BITMAP_WIDTH_PER_SH 2
/* DIDT IND registers */
#define DIDT_SQ_CTRL0 0x0
# define DIDT_CTRL_EN (1 << 0)
#define DIDT_DB_CTRL0 0x20
#define DIDT_TD_CTRL0 0x40
#define DIDT_TCP_CTRL0 0x60
/* SMC IND registers */
#define DPM_TABLE_475 0x3F768
# define SamuBootLevel(x) ((x) << 0)
# define SamuBootLevel_MASK 0x000000ff
# define SamuBootLevel_SHIFT 0
# define AcpBootLevel(x) ((x) << 8)
# define AcpBootLevel_MASK 0x0000ff00
# define AcpBootLevel_SHIFT 8
# define VceBootLevel(x) ((x) << 16)
# define VceBootLevel_MASK 0x00ff0000
# define VceBootLevel_SHIFT 16
# define UvdBootLevel(x) ((x) << 24)
# define UvdBootLevel_MASK 0xff000000
# define UvdBootLevel_SHIFT 24
#define FIRMWARE_FLAGS 0x3F800
# define INTERRUPTS_ENABLED (1 << 0)
#define NB_DPM_CONFIG_1 0x3F9E8
# define Dpm0PgNbPsLo(x) ((x) << 0)
# define Dpm0PgNbPsLo_MASK 0x000000ff
# define Dpm0PgNbPsLo_SHIFT 0
# define Dpm0PgNbPsHi(x) ((x) << 8)
# define Dpm0PgNbPsHi_MASK 0x0000ff00
# define Dpm0PgNbPsHi_SHIFT 8
# define DpmXNbPsLo(x) ((x) << 16)
# define DpmXNbPsLo_MASK 0x00ff0000
# define DpmXNbPsLo_SHIFT 16
# define DpmXNbPsHi(x) ((x) << 24)
# define DpmXNbPsHi_MASK 0xff000000
# define DpmXNbPsHi_SHIFT 24
#define SMC_SYSCON_RESET_CNTL 0x80000000
# define RST_REG (1 << 0)
#define SMC_SYSCON_CLOCK_CNTL_0 0x80000004
# define CK_DISABLE (1 << 0)
# define CKEN (1 << 24)
#define SMC_SYSCON_MISC_CNTL 0x80000010
#define SMC_SYSCON_MSG_ARG_0 0x80000068
#define SMC_PC_C 0x80000370
#define SMC_SCRATCH9 0x80000424
#define RCU_UC_EVENTS 0xC0000004
# define BOOT_SEQ_DONE (1 << 7)
#define GENERAL_PWRMGT 0xC0200000
# define GLOBAL_PWRMGT_EN (1 << 0)
# define STATIC_PM_EN (1 << 1)
# define THERMAL_PROTECTION_DIS (1 << 2)
# define THERMAL_PROTECTION_TYPE (1 << 3)
# define SW_SMIO_INDEX(x) ((x) << 6)
# define SW_SMIO_INDEX_MASK (1 << 6)
# define SW_SMIO_INDEX_SHIFT 6
# define VOLT_PWRMGT_EN (1 << 10)
# define GPU_COUNTER_CLK (1 << 15)
# define DYN_SPREAD_SPECTRUM_EN (1 << 23)
#define CNB_PWRMGT_CNTL 0xC0200004
# define GNB_SLOW_MODE(x) ((x) << 0)
# define GNB_SLOW_MODE_MASK (3 << 0)
# define GNB_SLOW_MODE_SHIFT 0
# define GNB_SLOW (1 << 2)
# define FORCE_NB_PS1 (1 << 3)
# define DPM_ENABLED (1 << 4)
#define SCLK_PWRMGT_CNTL 0xC0200008
# define SCLK_PWRMGT_OFF (1 << 0)
# define RESET_BUSY_CNT (1 << 4)
# define RESET_SCLK_CNT (1 << 5)
# define DYNAMIC_PM_EN (1 << 21)
#define TARGET_AND_CURRENT_PROFILE_INDEX 0xC0200014
# define CURRENT_STATE_MASK (0xf << 4)
# define CURRENT_STATE_SHIFT 4
# define CURR_MCLK_INDEX_MASK (0xf << 8)
# define CURR_MCLK_INDEX_SHIFT 8
# define CURR_SCLK_INDEX_MASK (0x1f << 16)
# define CURR_SCLK_INDEX_SHIFT 16
#define CG_SSP 0xC0200044
# define SST(x) ((x) << 0)
# define SST_MASK (0xffff << 0)
# define SSTU(x) ((x) << 16)
# define SSTU_MASK (0xf << 16)
#define CG_DISPLAY_GAP_CNTL 0xC0200060
# define DISP_GAP(x) ((x) << 0)
# define DISP_GAP_MASK (3 << 0)
# define VBI_TIMER_COUNT(x) ((x) << 4)
# define VBI_TIMER_COUNT_MASK (0x3fff << 4)
# define VBI_TIMER_UNIT(x) ((x) << 20)
# define VBI_TIMER_UNIT_MASK (7 << 20)
# define DISP_GAP_MCHG(x) ((x) << 24)
# define DISP_GAP_MCHG_MASK (3 << 24)
#define SMU_VOLTAGE_STATUS 0xC0200094
# define SMU_VOLTAGE_CURRENT_LEVEL_MASK (0xff << 1)
# define SMU_VOLTAGE_CURRENT_LEVEL_SHIFT 1
#define TARGET_AND_CURRENT_PROFILE_INDEX_1 0xC02000F0
# define CURR_PCIE_INDEX_MASK (0xf << 24)
# define CURR_PCIE_INDEX_SHIFT 24
#define CG_ULV_PARAMETER 0xC0200158
#define CG_FTV_0 0xC02001A8
#define CG_FTV_1 0xC02001AC
#define CG_FTV_2 0xC02001B0
#define CG_FTV_3 0xC02001B4
#define CG_FTV_4 0xC02001B8
#define CG_FTV_5 0xC02001BC
#define CG_FTV_6 0xC02001C0
#define CG_FTV_7 0xC02001C4
#define CG_DISPLAY_GAP_CNTL2 0xC0200230
#define LCAC_SX0_OVR_SEL 0xC0400D04
#define LCAC_SX0_OVR_VAL 0xC0400D08
#define LCAC_MC0_CNTL 0xC0400D30
#define LCAC_MC0_OVR_SEL 0xC0400D34
#define LCAC_MC0_OVR_VAL 0xC0400D38
#define LCAC_MC1_CNTL 0xC0400D3C
#define LCAC_MC1_OVR_SEL 0xC0400D40
#define LCAC_MC1_OVR_VAL 0xC0400D44
#define LCAC_MC2_OVR_SEL 0xC0400D4C
#define LCAC_MC2_OVR_VAL 0xC0400D50
#define LCAC_MC3_OVR_SEL 0xC0400D58
#define LCAC_MC3_OVR_VAL 0xC0400D5C
#define LCAC_CPL_CNTL 0xC0400D80
#define LCAC_CPL_OVR_SEL 0xC0400D84
#define LCAC_CPL_OVR_VAL 0xC0400D88
/* dGPU */
#define CG_THERMAL_CTRL 0xC0300004
#define DPM_EVENT_SRC(x) ((x) << 0)
#define DPM_EVENT_SRC_MASK (7 << 0)
#define DIG_THERM_DPM(x) ((x) << 14)
#define DIG_THERM_DPM_MASK 0x003FC000
#define DIG_THERM_DPM_SHIFT 14
#define CG_THERMAL_INT 0xC030000C
#define CI_DIG_THERM_INTH(x) ((x) << 8)
#define CI_DIG_THERM_INTH_MASK 0x0000FF00
#define CI_DIG_THERM_INTH_SHIFT 8
#define CI_DIG_THERM_INTL(x) ((x) << 16)
#define CI_DIG_THERM_INTL_MASK 0x00FF0000
#define CI_DIG_THERM_INTL_SHIFT 16
#define THERM_INT_MASK_HIGH (1 << 24)
#define THERM_INT_MASK_LOW (1 << 25)
#define CG_MULT_THERMAL_STATUS 0xC0300014
#define ASIC_MAX_TEMP(x) ((x) << 0)
#define ASIC_MAX_TEMP_MASK 0x000001ff
#define ASIC_MAX_TEMP_SHIFT 0
#define CTF_TEMP(x) ((x) << 9)
#define CTF_TEMP_MASK 0x0003fe00
#define CTF_TEMP_SHIFT 9
#define CG_SPLL_FUNC_CNTL 0xC0500140
#define SPLL_RESET (1 << 0)
#define SPLL_PWRON (1 << 1)
#define SPLL_BYPASS_EN (1 << 3)
#define SPLL_REF_DIV(x) ((x) << 5)
#define SPLL_REF_DIV_MASK (0x3f << 5)
#define SPLL_PDIV_A(x) ((x) << 20)
#define SPLL_PDIV_A_MASK (0x7f << 20)
#define SPLL_PDIV_A_SHIFT 20
#define CG_SPLL_FUNC_CNTL_2 0xC0500144
#define SCLK_MUX_SEL(x) ((x) << 0)
#define SCLK_MUX_SEL_MASK (0x1ff << 0)
#define CG_SPLL_FUNC_CNTL_3 0xC0500148
#define SPLL_FB_DIV(x) ((x) << 0)
#define SPLL_FB_DIV_MASK (0x3ffffff << 0)
#define SPLL_FB_DIV_SHIFT 0
#define SPLL_DITHEN (1 << 28)
#define CG_SPLL_FUNC_CNTL_4 0xC050014C
#define CG_SPLL_SPREAD_SPECTRUM 0xC0500164
#define SSEN (1 << 0)
#define CLK_S(x) ((x) << 4)
#define CLK_S_MASK (0xfff << 4)
#define CLK_S_SHIFT 4
#define CG_SPLL_SPREAD_SPECTRUM_2 0xC0500168
#define CLK_V(x) ((x) << 0)
#define CLK_V_MASK (0x3ffffff << 0)
#define CLK_V_SHIFT 0
#define MPLL_BYPASSCLK_SEL 0xC050019C
# define MPLL_CLKOUT_SEL(x) ((x) << 8)
# define MPLL_CLKOUT_SEL_MASK 0xFF00
#define CG_CLKPIN_CNTL 0xC05001A0
# define XTALIN_DIVIDE (1 << 1)
# define BCLK_AS_XCLK (1 << 2)
#define CG_CLKPIN_CNTL_2 0xC05001A4
# define FORCE_BIF_REFCLK_EN (1 << 3)
# define MUX_TCLK_TO_XCLK (1 << 8)
#define THM_CLK_CNTL 0xC05001A8
# define CMON_CLK_SEL(x) ((x) << 0)
# define CMON_CLK_SEL_MASK 0xFF
# define TMON_CLK_SEL(x) ((x) << 8)
# define TMON_CLK_SEL_MASK 0xFF00
#define MISC_CLK_CTRL 0xC05001AC
# define DEEP_SLEEP_CLK_SEL(x) ((x) << 0)
# define DEEP_SLEEP_CLK_SEL_MASK 0xFF
# define ZCLK_SEL(x) ((x) << 8)
# define ZCLK_SEL_MASK 0xFF00
/* KV/KB */
#define CG_THERMAL_INT_CTRL 0xC2100028
#define DIG_THERM_INTH(x) ((x) << 0)
#define DIG_THERM_INTH_MASK 0x000000FF
#define DIG_THERM_INTH_SHIFT 0
#define DIG_THERM_INTL(x) ((x) << 8)
#define DIG_THERM_INTL_MASK 0x0000FF00
#define DIG_THERM_INTL_SHIFT 8
#define THERM_INTH_MASK (1 << 24)
#define THERM_INTL_MASK (1 << 25)
/* PCIE registers idx/data 0x38/0x3c */
#define PB0_PIF_PWRDOWN_0 0x1100012 /* PCIE */
# define PLL_POWER_STATE_IN_TXS2_0(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_0_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_0_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_0(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_0_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_0_SHIFT 10
# define PLL_RAMP_UP_TIME_0(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_0_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_0_SHIFT 24
#define PB0_PIF_PWRDOWN_1 0x1100013 /* PCIE */
# define PLL_POWER_STATE_IN_TXS2_1(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_1_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_1_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_1(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_1_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_1_SHIFT 10
# define PLL_RAMP_UP_TIME_1(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_1_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_1_SHIFT 24
#define PCIE_CNTL2 0x1001001c /* PCIE */
# define SLV_MEM_LS_EN (1 << 16)
# define SLV_MEM_AGGRESSIVE_LS_EN (1 << 17)
# define MST_MEM_LS_EN (1 << 18)
# define REPLAY_MEM_LS_EN (1 << 19)
#define PCIE_LC_STATUS1 0x1400028 /* PCIE */
# define LC_REVERSE_RCVR (1 << 0)
# define LC_REVERSE_XMIT (1 << 1)
# define LC_OPERATING_LINK_WIDTH_MASK (0x7 << 2)
# define LC_OPERATING_LINK_WIDTH_SHIFT 2
# define LC_DETECTED_LINK_WIDTH_MASK (0x7 << 5)
# define LC_DETECTED_LINK_WIDTH_SHIFT 5
#define PCIE_P_CNTL 0x1400040 /* PCIE */
# define P_IGNORE_EDB_ERR (1 << 6)
#define PB1_PIF_PWRDOWN_0 0x2100012 /* PCIE */
#define PB1_PIF_PWRDOWN_1 0x2100013 /* PCIE */
#define PCIE_LC_CNTL 0x100100A0 /* PCIE */
# define LC_L0S_INACTIVITY(x) ((x) << 8)
# define LC_L0S_INACTIVITY_MASK (0xf << 8)
# define LC_L0S_INACTIVITY_SHIFT 8
# define LC_L1_INACTIVITY(x) ((x) << 12)
# define LC_L1_INACTIVITY_MASK (0xf << 12)
# define LC_L1_INACTIVITY_SHIFT 12
# define LC_PMI_TO_L1_DIS (1 << 16)
# define LC_ASPM_TO_L1_DIS (1 << 24)
#define PCIE_LC_LINK_WIDTH_CNTL 0x100100A2 /* PCIE */
# define LC_LINK_WIDTH_SHIFT 0
# define LC_LINK_WIDTH_MASK 0x7
# define LC_LINK_WIDTH_X0 0
# define LC_LINK_WIDTH_X1 1
# define LC_LINK_WIDTH_X2 2
# define LC_LINK_WIDTH_X4 3
# define LC_LINK_WIDTH_X8 4
# define LC_LINK_WIDTH_X16 6
# define LC_LINK_WIDTH_RD_SHIFT 4
# define LC_LINK_WIDTH_RD_MASK 0x70
# define LC_RECONFIG_ARC_MISSING_ESCAPE (1 << 7)
# define LC_RECONFIG_NOW (1 << 8)
# define LC_RENEGOTIATION_SUPPORT (1 << 9)
# define LC_RENEGOTIATE_EN (1 << 10)
# define LC_SHORT_RECONFIG_EN (1 << 11)
# define LC_UPCONFIGURE_SUPPORT (1 << 12)
# define LC_UPCONFIGURE_DIS (1 << 13)
# define LC_DYN_LANES_PWR_STATE(x) ((x) << 21)
# define LC_DYN_LANES_PWR_STATE_MASK (0x3 << 21)
# define LC_DYN_LANES_PWR_STATE_SHIFT 21
#define PCIE_LC_N_FTS_CNTL 0x100100a3 /* PCIE */
# define LC_XMIT_N_FTS(x) ((x) << 0)
# define LC_XMIT_N_FTS_MASK (0xff << 0)
# define LC_XMIT_N_FTS_SHIFT 0
# define LC_XMIT_N_FTS_OVERRIDE_EN (1 << 8)
# define LC_N_FTS_MASK (0xff << 24)
#define PCIE_LC_SPEED_CNTL 0x100100A4 /* PCIE */
# define LC_GEN2_EN_STRAP (1 << 0)
# define LC_GEN3_EN_STRAP (1 << 1)
# define LC_TARGET_LINK_SPEED_OVERRIDE_EN (1 << 2)
# define LC_TARGET_LINK_SPEED_OVERRIDE_MASK (0x3 << 3)
# define LC_TARGET_LINK_SPEED_OVERRIDE_SHIFT 3
# define LC_FORCE_EN_SW_SPEED_CHANGE (1 << 5)
# define LC_FORCE_DIS_SW_SPEED_CHANGE (1 << 6)
# define LC_FORCE_EN_HW_SPEED_CHANGE (1 << 7)
# define LC_FORCE_DIS_HW_SPEED_CHANGE (1 << 8)
# define LC_INITIATE_LINK_SPEED_CHANGE (1 << 9)
# define LC_SPEED_CHANGE_ATTEMPTS_ALLOWED_MASK (0x3 << 10)
# define LC_SPEED_CHANGE_ATTEMPTS_ALLOWED_SHIFT 10
# define LC_CURRENT_DATA_RATE_MASK (0x3 << 13) /* 0/1/2 = gen1/2/3 */
# define LC_CURRENT_DATA_RATE_SHIFT 13
# define LC_CLR_FAILED_SPD_CHANGE_CNT (1 << 16)
# define LC_OTHER_SIDE_EVER_SENT_GEN2 (1 << 18)
# define LC_OTHER_SIDE_SUPPORTS_GEN2 (1 << 19)
# define LC_OTHER_SIDE_EVER_SENT_GEN3 (1 << 20)
# define LC_OTHER_SIDE_SUPPORTS_GEN3 (1 << 21)
#define PCIE_LC_CNTL2 0x100100B1 /* PCIE */
# define LC_ALLOW_PDWN_IN_L1 (1 << 17)
# define LC_ALLOW_PDWN_IN_L23 (1 << 18)
#define PCIE_LC_CNTL3 0x100100B5 /* PCIE */
# define LC_GO_TO_RECOVERY (1 << 30)
#define PCIE_LC_CNTL4 0x100100B6 /* PCIE */
# define LC_REDO_EQ (1 << 5)
# define LC_SET_QUIESCE (1 << 13)
/* direct registers */
#define PCIE_INDEX 0x38
#define PCIE_DATA 0x3C
#define SMC_IND_INDEX_0 0x200
#define SMC_IND_DATA_0 0x204
#define SMC_IND_ACCESS_CNTL 0x240
#define AUTO_INCREMENT_IND_0 (1 << 0)
#define SMC_MESSAGE_0 0x250
#define SMC_MSG_MASK 0xffff
#define SMC_RESP_0 0x254
#define SMC_RESP_MASK 0xffff
#define SMC_MSG_ARG_0 0x290
#define VGA_HDP_CONTROL 0x328
#define VGA_MEMORY_DISABLE (1 << 4)
#define DMIF_ADDR_CALC 0xC00
#define PIPE0_DMIF_BUFFER_CONTROL 0x0ca0
# define DMIF_BUFFERS_ALLOCATED(x) ((x) << 0)
# define DMIF_BUFFERS_ALLOCATED_COMPLETED (1 << 4)
#define SRBM_GFX_CNTL 0xE44
#define PIPEID(x) ((x) << 0)
#define MEID(x) ((x) << 2)
#define VMID(x) ((x) << 4)
#define QUEUEID(x) ((x) << 8)
#define SRBM_STATUS2 0xE4C
#define SDMA_BUSY (1 << 5)
#define SDMA1_BUSY (1 << 6)
#define SRBM_STATUS 0xE50
#define UVD_RQ_PENDING (1 << 1)
#define GRBM_RQ_PENDING (1 << 5)
#define VMC_BUSY (1 << 8)
#define MCB_BUSY (1 << 9)
#define MCB_NON_DISPLAY_BUSY (1 << 10)
#define MCC_BUSY (1 << 11)
#define MCD_BUSY (1 << 12)
#define SEM_BUSY (1 << 14)
#define IH_BUSY (1 << 17)
#define UVD_BUSY (1 << 19)
#define SRBM_SOFT_RESET 0xE60
#define SOFT_RESET_BIF (1 << 1)
#define SOFT_RESET_R0PLL (1 << 4)
#define SOFT_RESET_DC (1 << 5)
#define SOFT_RESET_SDMA1 (1 << 6)
#define SOFT_RESET_GRBM (1 << 8)
#define SOFT_RESET_HDP (1 << 9)
#define SOFT_RESET_IH (1 << 10)
#define SOFT_RESET_MC (1 << 11)
#define SOFT_RESET_ROM (1 << 14)
#define SOFT_RESET_SEM (1 << 15)
#define SOFT_RESET_VMC (1 << 17)
#define SOFT_RESET_SDMA (1 << 20)
#define SOFT_RESET_TST (1 << 21)
#define SOFT_RESET_REGBB (1 << 22)
#define SOFT_RESET_ORB (1 << 23)
#define SOFT_RESET_VCE (1 << 24)
#define VM_L2_CNTL 0x1400
#define ENABLE_L2_CACHE (1 << 0)
#define ENABLE_L2_FRAGMENT_PROCESSING (1 << 1)
#define L2_CACHE_PTE_ENDIAN_SWAP_MODE(x) ((x) << 2)
#define L2_CACHE_PDE_ENDIAN_SWAP_MODE(x) ((x) << 4)
#define ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE (1 << 9)
#define ENABLE_L2_PDE0_CACHE_LRU_UPDATE_BY_WRITE (1 << 10)
#define EFFECTIVE_L2_QUEUE_SIZE(x) (((x) & 7) << 15)
#define CONTEXT1_IDENTITY_ACCESS_MODE(x) (((x) & 3) << 19)
#define VM_L2_CNTL2 0x1404
#define INVALIDATE_ALL_L1_TLBS (1 << 0)
#define INVALIDATE_L2_CACHE (1 << 1)
#define INVALIDATE_CACHE_MODE(x) ((x) << 26)
#define INVALIDATE_PTE_AND_PDE_CACHES 0
#define INVALIDATE_ONLY_PTE_CACHES 1
#define INVALIDATE_ONLY_PDE_CACHES 2
#define VM_L2_CNTL3 0x1408
#define BANK_SELECT(x) ((x) << 0)
#define L2_CACHE_UPDATE_MODE(x) ((x) << 6)
#define L2_CACHE_BIGK_FRAGMENT_SIZE(x) ((x) << 15)
#define L2_CACHE_BIGK_ASSOCIATIVITY (1 << 20)
#define VM_L2_STATUS 0x140C
#define L2_BUSY (1 << 0)
#define VM_CONTEXT0_CNTL 0x1410
#define ENABLE_CONTEXT (1 << 0)
#define PAGE_TABLE_DEPTH(x) (((x) & 3) << 1)
#define RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 3)
#define RANGE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 4)
#define DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 6)
#define DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 7)
#define PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 9)
#define PDE0_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 10)
#define VALID_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 12)
#define VALID_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 13)
#define READ_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 15)
#define READ_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 16)
#define WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 18)
#define WRITE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 19)
#define VM_CONTEXT1_CNTL 0x1414
#define VM_CONTEXT0_CNTL2 0x1430
#define VM_CONTEXT1_CNTL2 0x1434
#define VM_CONTEXT8_PAGE_TABLE_BASE_ADDR 0x1438
#define VM_CONTEXT9_PAGE_TABLE_BASE_ADDR 0x143c
#define VM_CONTEXT10_PAGE_TABLE_BASE_ADDR 0x1440
#define VM_CONTEXT11_PAGE_TABLE_BASE_ADDR 0x1444
#define VM_CONTEXT12_PAGE_TABLE_BASE_ADDR 0x1448
#define VM_CONTEXT13_PAGE_TABLE_BASE_ADDR 0x144c
#define VM_CONTEXT14_PAGE_TABLE_BASE_ADDR 0x1450
#define VM_CONTEXT15_PAGE_TABLE_BASE_ADDR 0x1454
#define VM_INVALIDATE_REQUEST 0x1478
#define VM_INVALIDATE_RESPONSE 0x147c
#define VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x14DC
#define PROTECTIONS_MASK (0xf << 0)
#define PROTECTIONS_SHIFT 0
/* bit 0: range
* bit 1: pde0
* bit 2: valid
* bit 3: read
* bit 4: write
*/
#define MEMORY_CLIENT_ID_MASK (0xff << 12)
#define MEMORY_CLIENT_ID_SHIFT 12
#define MEMORY_CLIENT_RW_MASK (1 << 24)
#define MEMORY_CLIENT_RW_SHIFT 24
#define FAULT_VMID_MASK (0xf << 25)
#define FAULT_VMID_SHIFT 25
#define VM_CONTEXT1_PROTECTION_FAULT_MCCLIENT 0x14E4
#define VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x14FC
#define VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR 0x1518
#define VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR 0x151c
#define VM_CONTEXT0_PAGE_TABLE_BASE_ADDR 0x153c
#define VM_CONTEXT1_PAGE_TABLE_BASE_ADDR 0x1540
#define VM_CONTEXT2_PAGE_TABLE_BASE_ADDR 0x1544
#define VM_CONTEXT3_PAGE_TABLE_BASE_ADDR 0x1548
#define VM_CONTEXT4_PAGE_TABLE_BASE_ADDR 0x154c
#define VM_CONTEXT5_PAGE_TABLE_BASE_ADDR 0x1550
#define VM_CONTEXT6_PAGE_TABLE_BASE_ADDR 0x1554
#define VM_CONTEXT7_PAGE_TABLE_BASE_ADDR 0x1558
#define VM_CONTEXT0_PAGE_TABLE_START_ADDR 0x155c
#define VM_CONTEXT1_PAGE_TABLE_START_ADDR 0x1560
#define VM_CONTEXT0_PAGE_TABLE_END_ADDR 0x157C
#define VM_CONTEXT1_PAGE_TABLE_END_ADDR 0x1580
#define VM_L2_CG 0x15c0
#define MC_CG_ENABLE (1 << 18)
#define MC_LS_ENABLE (1 << 19)
#define MC_SHARED_CHMAP 0x2004
#define NOOFCHAN_SHIFT 12
#define NOOFCHAN_MASK 0x0000f000
#define MC_SHARED_CHREMAP 0x2008
#define CHUB_CONTROL 0x1864
#define BYPASS_VM (1 << 0)
#define MC_VM_FB_LOCATION 0x2024
#define MC_VM_AGP_TOP 0x2028
#define MC_VM_AGP_BOT 0x202C
#define MC_VM_AGP_BASE 0x2030
#define MC_VM_SYSTEM_APERTURE_LOW_ADDR 0x2034
#define MC_VM_SYSTEM_APERTURE_HIGH_ADDR 0x2038
#define MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR 0x203C
#define MC_VM_MX_L1_TLB_CNTL 0x2064
#define ENABLE_L1_TLB (1 << 0)
#define ENABLE_L1_FRAGMENT_PROCESSING (1 << 1)
#define SYSTEM_ACCESS_MODE_PA_ONLY (0 << 3)
#define SYSTEM_ACCESS_MODE_USE_SYS_MAP (1 << 3)
#define SYSTEM_ACCESS_MODE_IN_SYS (2 << 3)
#define SYSTEM_ACCESS_MODE_NOT_IN_SYS (3 << 3)
#define SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU (0 << 5)
#define ENABLE_ADVANCED_DRIVER_MODEL (1 << 6)
#define MC_VM_FB_OFFSET 0x2068
#define MC_SHARED_BLACKOUT_CNTL 0x20ac
#define MC_HUB_MISC_HUB_CG 0x20b8
#define MC_HUB_MISC_VM_CG 0x20bc
#define MC_HUB_MISC_SIP_CG 0x20c0
#define MC_XPB_CLK_GAT 0x2478
#define MC_CITF_MISC_RD_CG 0x2648
#define MC_CITF_MISC_WR_CG 0x264c
#define MC_CITF_MISC_VM_CG 0x2650
#define MC_ARB_RAMCFG 0x2760
#define NOOFBANK_SHIFT 0
#define NOOFBANK_MASK 0x00000003
#define NOOFRANK_SHIFT 2
#define NOOFRANK_MASK 0x00000004
#define NOOFROWS_SHIFT 3
#define NOOFROWS_MASK 0x00000038
#define NOOFCOLS_SHIFT 6
#define NOOFCOLS_MASK 0x000000C0
#define CHANSIZE_SHIFT 8
#define CHANSIZE_MASK 0x00000100
#define NOOFGROUPS_SHIFT 12
#define NOOFGROUPS_MASK 0x00001000
#define MC_ARB_DRAM_TIMING 0x2774
#define MC_ARB_DRAM_TIMING2 0x2778
#define MC_ARB_BURST_TIME 0x2808
#define STATE0(x) ((x) << 0)
#define STATE0_MASK (0x1f << 0)
#define STATE0_SHIFT 0
#define STATE1(x) ((x) << 5)
#define STATE1_MASK (0x1f << 5)
#define STATE1_SHIFT 5
#define STATE2(x) ((x) << 10)
#define STATE2_MASK (0x1f << 10)
#define STATE2_SHIFT 10
#define STATE3(x) ((x) << 15)
#define STATE3_MASK (0x1f << 15)
#define STATE3_SHIFT 15
#define MC_SEQ_RAS_TIMING 0x28a0
#define MC_SEQ_CAS_TIMING 0x28a4
#define MC_SEQ_MISC_TIMING 0x28a8
#define MC_SEQ_MISC_TIMING2 0x28ac
#define MC_SEQ_PMG_TIMING 0x28b0
#define MC_SEQ_RD_CTL_D0 0x28b4
#define MC_SEQ_RD_CTL_D1 0x28b8
#define MC_SEQ_WR_CTL_D0 0x28bc
#define MC_SEQ_WR_CTL_D1 0x28c0
#define MC_SEQ_SUP_CNTL 0x28c8
#define RUN_MASK (1 << 0)
#define MC_SEQ_SUP_PGM 0x28cc
#define MC_PMG_AUTO_CMD 0x28d0
#define MC_SEQ_TRAIN_WAKEUP_CNTL 0x28e8
#define TRAIN_DONE_D0 (1 << 30)
#define TRAIN_DONE_D1 (1 << 31)
#define MC_IO_PAD_CNTL_D0 0x29d0
#define MEM_FALL_OUT_CMD (1 << 8)
#define MC_SEQ_MISC0 0x2a00
#define MC_SEQ_MISC0_VEN_ID_SHIFT 8
#define MC_SEQ_MISC0_VEN_ID_MASK 0x00000f00
#define MC_SEQ_MISC0_VEN_ID_VALUE 3
#define MC_SEQ_MISC0_REV_ID_SHIFT 12
#define MC_SEQ_MISC0_REV_ID_MASK 0x0000f000
#define MC_SEQ_MISC0_REV_ID_VALUE 1
#define MC_SEQ_MISC0_GDDR5_SHIFT 28
#define MC_SEQ_MISC0_GDDR5_MASK 0xf0000000
#define MC_SEQ_MISC0_GDDR5_VALUE 5
#define MC_SEQ_MISC1 0x2a04
#define MC_SEQ_RESERVE_M 0x2a08
#define MC_PMG_CMD_EMRS 0x2a0c
#define MC_SEQ_IO_DEBUG_INDEX 0x2a44
#define MC_SEQ_IO_DEBUG_DATA 0x2a48
#define MC_SEQ_MISC5 0x2a54
#define MC_SEQ_MISC6 0x2a58
#define MC_SEQ_MISC7 0x2a64
#define MC_SEQ_RAS_TIMING_LP 0x2a6c
#define MC_SEQ_CAS_TIMING_LP 0x2a70
#define MC_SEQ_MISC_TIMING_LP 0x2a74
#define MC_SEQ_MISC_TIMING2_LP 0x2a78
#define MC_SEQ_WR_CTL_D0_LP 0x2a7c
#define MC_SEQ_WR_CTL_D1_LP 0x2a80
#define MC_SEQ_PMG_CMD_EMRS_LP 0x2a84
#define MC_SEQ_PMG_CMD_MRS_LP 0x2a88
#define MC_PMG_CMD_MRS 0x2aac
#define MC_SEQ_RD_CTL_D0_LP 0x2b1c
#define MC_SEQ_RD_CTL_D1_LP 0x2b20
#define MC_PMG_CMD_MRS1 0x2b44
#define MC_SEQ_PMG_CMD_MRS1_LP 0x2b48
#define MC_SEQ_PMG_TIMING_LP 0x2b4c
#define MC_SEQ_WR_CTL_2 0x2b54
#define MC_SEQ_WR_CTL_2_LP 0x2b58
#define MC_PMG_CMD_MRS2 0x2b5c
#define MC_SEQ_PMG_CMD_MRS2_LP 0x2b60
#define MCLK_PWRMGT_CNTL 0x2ba0
# define DLL_SPEED(x) ((x) << 0)
# define DLL_SPEED_MASK (0x1f << 0)
# define DLL_READY (1 << 6)
# define MC_INT_CNTL (1 << 7)
# define MRDCK0_PDNB (1 << 8)
# define MRDCK1_PDNB (1 << 9)
# define MRDCK0_RESET (1 << 16)
# define MRDCK1_RESET (1 << 17)
# define DLL_READY_READ (1 << 24)
#define DLL_CNTL 0x2ba4
# define MRDCK0_BYPASS (1 << 24)
# define MRDCK1_BYPASS (1 << 25)
#define MPLL_FUNC_CNTL 0x2bb4
#define BWCTRL(x) ((x) << 20)
#define BWCTRL_MASK (0xff << 20)
#define MPLL_FUNC_CNTL_1 0x2bb8
#define VCO_MODE(x) ((x) << 0)
#define VCO_MODE_MASK (3 << 0)
#define CLKFRAC(x) ((x) << 4)
#define CLKFRAC_MASK (0xfff << 4)
#define CLKF(x) ((x) << 16)
#define CLKF_MASK (0xfff << 16)
#define MPLL_FUNC_CNTL_2 0x2bbc
#define MPLL_AD_FUNC_CNTL 0x2bc0
#define YCLK_POST_DIV(x) ((x) << 0)
#define YCLK_POST_DIV_MASK (7 << 0)
#define MPLL_DQ_FUNC_CNTL 0x2bc4
#define YCLK_SEL(x) ((x) << 4)
#define YCLK_SEL_MASK (1 << 4)
#define MPLL_SS1 0x2bcc
#define CLKV(x) ((x) << 0)
#define CLKV_MASK (0x3ffffff << 0)
#define MPLL_SS2 0x2bd0
#define CLKS(x) ((x) << 0)
#define CLKS_MASK (0xfff << 0)
#define HDP_HOST_PATH_CNTL 0x2C00
#define CLOCK_GATING_DIS (1 << 23)
#define HDP_NONSURFACE_BASE 0x2C04
#define HDP_NONSURFACE_INFO 0x2C08
#define HDP_NONSURFACE_SIZE 0x2C0C
#define HDP_ADDR_CONFIG 0x2F48
#define HDP_MISC_CNTL 0x2F4C
#define HDP_FLUSH_INVALIDATE_CACHE (1 << 0)
#define HDP_MEM_POWER_LS 0x2F50
#define HDP_LS_ENABLE (1 << 0)
#define ATC_MISC_CG 0x3350
#define MC_SEQ_CNTL_3 0x3600
# define CAC_EN (1 << 31)
#define MC_SEQ_G5PDX_CTRL 0x3604
#define MC_SEQ_G5PDX_CTRL_LP 0x3608
#define MC_SEQ_G5PDX_CMD0 0x360c
#define MC_SEQ_G5PDX_CMD0_LP 0x3610
#define MC_SEQ_G5PDX_CMD1 0x3614
#define MC_SEQ_G5PDX_CMD1_LP 0x3618
#define MC_SEQ_PMG_DVS_CTL 0x3628
#define MC_SEQ_PMG_DVS_CTL_LP 0x362c
#define MC_SEQ_PMG_DVS_CMD 0x3630
#define MC_SEQ_PMG_DVS_CMD_LP 0x3634
#define MC_SEQ_DLL_STBY 0x3638
#define MC_SEQ_DLL_STBY_LP 0x363c
#define IH_RB_CNTL 0x3e00
# define IH_RB_ENABLE (1 << 0)
# define IH_RB_SIZE(x) ((x) << 1) /* log2 */
# define IH_RB_FULL_DRAIN_ENABLE (1 << 6)
# define IH_WPTR_WRITEBACK_ENABLE (1 << 8)
# define IH_WPTR_WRITEBACK_TIMER(x) ((x) << 9) /* log2 */
# define IH_WPTR_OVERFLOW_ENABLE (1 << 16)
# define IH_WPTR_OVERFLOW_CLEAR (1 << 31)
#define IH_RB_BASE 0x3e04
#define IH_RB_RPTR 0x3e08
#define IH_RB_WPTR 0x3e0c
# define RB_OVERFLOW (1 << 0)
# define WPTR_OFFSET_MASK 0x3fffc
#define IH_RB_WPTR_ADDR_HI 0x3e10
#define IH_RB_WPTR_ADDR_LO 0x3e14
#define IH_CNTL 0x3e18
# define ENABLE_INTR (1 << 0)
# define IH_MC_SWAP(x) ((x) << 1)
# define IH_MC_SWAP_NONE 0
# define IH_MC_SWAP_16BIT 1
# define IH_MC_SWAP_32BIT 2
# define IH_MC_SWAP_64BIT 3
# define RPTR_REARM (1 << 4)
# define MC_WRREQ_CREDIT(x) ((x) << 15)
# define MC_WR_CLEAN_CNT(x) ((x) << 20)
# define MC_VMID(x) ((x) << 25)
#define BIF_LNCNT_RESET 0x5220
# define RESET_LNCNT_EN (1 << 0)
#define CONFIG_MEMSIZE 0x5428
#define INTERRUPT_CNTL 0x5468
# define IH_DUMMY_RD_OVERRIDE (1 << 0)
# define IH_DUMMY_RD_EN (1 << 1)
# define IH_REQ_NONSNOOP_EN (1 << 3)
# define GEN_IH_INT_EN (1 << 8)
#define INTERRUPT_CNTL2 0x546c
#define HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480
#define BIF_FB_EN 0x5490
#define FB_READ_EN (1 << 0)
#define FB_WRITE_EN (1 << 1)
#define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0
#define GPU_HDP_FLUSH_REQ 0x54DC
#define GPU_HDP_FLUSH_DONE 0x54E0
#define CP0 (1 << 0)
#define CP1 (1 << 1)
#define CP2 (1 << 2)
#define CP3 (1 << 3)
#define CP4 (1 << 4)
#define CP5 (1 << 5)
#define CP6 (1 << 6)
#define CP7 (1 << 7)
#define CP8 (1 << 8)
#define CP9 (1 << 9)
#define SDMA0 (1 << 10)
#define SDMA1 (1 << 11)
/* 0x6b04, 0x7704, 0x10304, 0x10f04, 0x11b04, 0x12704 */
#define LB_MEMORY_CTRL 0x6b04
#define LB_MEMORY_SIZE(x) ((x) << 0)
#define LB_MEMORY_CONFIG(x) ((x) << 20)
#define DPG_WATERMARK_MASK_CONTROL 0x6cc8
# define LATENCY_WATERMARK_MASK(x) ((x) << 8)
#define DPG_PIPE_LATENCY_CONTROL 0x6ccc
# define LATENCY_LOW_WATERMARK(x) ((x) << 0)
# define LATENCY_HIGH_WATERMARK(x) ((x) << 16)
/* 0x6b24, 0x7724, 0x10324, 0x10f24, 0x11b24, 0x12724 */
#define LB_VLINE_STATUS 0x6b24
# define VLINE_OCCURRED (1 << 0)
# define VLINE_ACK (1 << 4)
# define VLINE_STAT (1 << 12)
# define VLINE_INTERRUPT (1 << 16)
# define VLINE_INTERRUPT_TYPE (1 << 17)
/* 0x6b2c, 0x772c, 0x1032c, 0x10f2c, 0x11b2c, 0x1272c */
#define LB_VBLANK_STATUS 0x6b2c
# define VBLANK_OCCURRED (1 << 0)
# define VBLANK_ACK (1 << 4)
# define VBLANK_STAT (1 << 12)
# define VBLANK_INTERRUPT (1 << 16)
# define VBLANK_INTERRUPT_TYPE (1 << 17)
/* 0x6b20, 0x7720, 0x10320, 0x10f20, 0x11b20, 0x12720 */
#define LB_INTERRUPT_MASK 0x6b20
# define VBLANK_INTERRUPT_MASK (1 << 0)
# define VLINE_INTERRUPT_MASK (1 << 4)
# define VLINE2_INTERRUPT_MASK (1 << 8)
#define DISP_INTERRUPT_STATUS 0x60f4
# define LB_D1_VLINE_INTERRUPT (1 << 2)
# define LB_D1_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD1_INTERRUPT (1 << 17)
# define DC_HPD1_RX_INTERRUPT (1 << 18)
# define DACA_AUTODETECT_INTERRUPT (1 << 22)
# define DACB_AUTODETECT_INTERRUPT (1 << 23)
# define DC_I2C_SW_DONE_INTERRUPT (1 << 24)
# define DC_I2C_HW_DONE_INTERRUPT (1 << 25)
#define DISP_INTERRUPT_STATUS_CONTINUE 0x60f8
# define LB_D2_VLINE_INTERRUPT (1 << 2)
# define LB_D2_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD2_INTERRUPT (1 << 17)
# define DC_HPD2_RX_INTERRUPT (1 << 18)
# define DISP_TIMER_INTERRUPT (1 << 24)
#define DISP_INTERRUPT_STATUS_CONTINUE2 0x60fc
# define LB_D3_VLINE_INTERRUPT (1 << 2)
# define LB_D3_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD3_INTERRUPT (1 << 17)
# define DC_HPD3_RX_INTERRUPT (1 << 18)
#define DISP_INTERRUPT_STATUS_CONTINUE3 0x6100
# define LB_D4_VLINE_INTERRUPT (1 << 2)
# define LB_D4_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD4_INTERRUPT (1 << 17)
# define DC_HPD4_RX_INTERRUPT (1 << 18)
#define DISP_INTERRUPT_STATUS_CONTINUE4 0x614c
# define LB_D5_VLINE_INTERRUPT (1 << 2)
# define LB_D5_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD5_INTERRUPT (1 << 17)
# define DC_HPD5_RX_INTERRUPT (1 << 18)
#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6150
# define LB_D6_VLINE_INTERRUPT (1 << 2)
# define LB_D6_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD6_INTERRUPT (1 << 17)
# define DC_HPD6_RX_INTERRUPT (1 << 18)
#define DISP_INTERRUPT_STATUS_CONTINUE6 0x6780
#define DAC_AUTODETECT_INT_CONTROL 0x67c8
#define DC_HPD1_INT_STATUS 0x601c
#define DC_HPD2_INT_STATUS 0x6028
#define DC_HPD3_INT_STATUS 0x6034
#define DC_HPD4_INT_STATUS 0x6040
#define DC_HPD5_INT_STATUS 0x604c
#define DC_HPD6_INT_STATUS 0x6058
# define DC_HPDx_INT_STATUS (1 << 0)
# define DC_HPDx_SENSE (1 << 1)
# define DC_HPDx_SENSE_DELAYED (1 << 4)
# define DC_HPDx_RX_INT_STATUS (1 << 8)
#define DC_HPD1_INT_CONTROL 0x6020
#define DC_HPD2_INT_CONTROL 0x602c
#define DC_HPD3_INT_CONTROL 0x6038
#define DC_HPD4_INT_CONTROL 0x6044
#define DC_HPD5_INT_CONTROL 0x6050
#define DC_HPD6_INT_CONTROL 0x605c
# define DC_HPDx_INT_ACK (1 << 0)
# define DC_HPDx_INT_POLARITY (1 << 8)
# define DC_HPDx_INT_EN (1 << 16)
# define DC_HPDx_RX_INT_ACK (1 << 20)
# define DC_HPDx_RX_INT_EN (1 << 24)
#define DC_HPD1_CONTROL 0x6024
#define DC_HPD2_CONTROL 0x6030
#define DC_HPD3_CONTROL 0x603c
#define DC_HPD4_CONTROL 0x6048
#define DC_HPD5_CONTROL 0x6054
#define DC_HPD6_CONTROL 0x6060
# define DC_HPDx_CONNECTION_TIMER(x) ((x) << 0)
# define DC_HPDx_RX_INT_TIMER(x) ((x) << 16)
# define DC_HPDx_EN (1 << 28)
#define DPG_PIPE_STUTTER_CONTROL 0x6cd4
# define STUTTER_ENABLE (1 << 0)
/* DCE8 FMT blocks */
#define FMT_DYNAMIC_EXP_CNTL 0x6fb4
# define FMT_DYNAMIC_EXP_EN (1 << 0)
# define FMT_DYNAMIC_EXP_MODE (1 << 4)
/* 0 = 10bit -> 12bit, 1 = 8bit -> 12bit */
#define FMT_CONTROL 0x6fb8
# define FMT_PIXEL_ENCODING (1 << 16)
/* 0 = RGB 4:4:4 or YCbCr 4:4:4, 1 = YCbCr 4:2:2 */
#define FMT_BIT_DEPTH_CONTROL 0x6fc8
# define FMT_TRUNCATE_EN (1 << 0)
# define FMT_TRUNCATE_MODE (1 << 1)
# define FMT_TRUNCATE_DEPTH(x) ((x) << 4) /* 0 - 18bpp, 1 - 24bpp, 2 - 30bpp */
# define FMT_SPATIAL_DITHER_EN (1 << 8)
# define FMT_SPATIAL_DITHER_MODE(x) ((x) << 9)
# define FMT_SPATIAL_DITHER_DEPTH(x) ((x) << 11) /* 0 - 18bpp, 1 - 24bpp, 2 - 30bpp */
# define FMT_FRAME_RANDOM_ENABLE (1 << 13)
# define FMT_RGB_RANDOM_ENABLE (1 << 14)
# define FMT_HIGHPASS_RANDOM_ENABLE (1 << 15)
# define FMT_TEMPORAL_DITHER_EN (1 << 16)
# define FMT_TEMPORAL_DITHER_DEPTH(x) ((x) << 17) /* 0 - 18bpp, 1 - 24bpp, 2 - 30bpp */
# define FMT_TEMPORAL_DITHER_OFFSET(x) ((x) << 21)
# define FMT_TEMPORAL_LEVEL (1 << 24)
# define FMT_TEMPORAL_DITHER_RESET (1 << 25)
# define FMT_25FRC_SEL(x) ((x) << 26)
# define FMT_50FRC_SEL(x) ((x) << 28)
# define FMT_75FRC_SEL(x) ((x) << 30)
#define FMT_CLAMP_CONTROL 0x6fe4
# define FMT_CLAMP_DATA_EN (1 << 0)
# define FMT_CLAMP_COLOR_FORMAT(x) ((x) << 16)
# define FMT_CLAMP_6BPC 0
# define FMT_CLAMP_8BPC 1
# define FMT_CLAMP_10BPC 2
#define GRBM_CNTL 0x8000
#define GRBM_READ_TIMEOUT(x) ((x) << 0)
#define GRBM_STATUS2 0x8008
#define ME0PIPE1_CMDFIFO_AVAIL_MASK 0x0000000F
#define ME0PIPE1_CF_RQ_PENDING (1 << 4)
#define ME0PIPE1_PF_RQ_PENDING (1 << 5)
#define ME1PIPE0_RQ_PENDING (1 << 6)
#define ME1PIPE1_RQ_PENDING (1 << 7)
#define ME1PIPE2_RQ_PENDING (1 << 8)
#define ME1PIPE3_RQ_PENDING (1 << 9)
#define ME2PIPE0_RQ_PENDING (1 << 10)
#define ME2PIPE1_RQ_PENDING (1 << 11)
#define ME2PIPE2_RQ_PENDING (1 << 12)
#define ME2PIPE3_RQ_PENDING (1 << 13)
#define RLC_RQ_PENDING (1 << 14)
#define RLC_BUSY (1 << 24)
#define TC_BUSY (1 << 25)
#define CPF_BUSY (1 << 28)
#define CPC_BUSY (1 << 29)
#define CPG_BUSY (1 << 30)
#define GRBM_STATUS 0x8010
#define ME0PIPE0_CMDFIFO_AVAIL_MASK 0x0000000F
#define SRBM_RQ_PENDING (1 << 5)
#define ME0PIPE0_CF_RQ_PENDING (1 << 7)
#define ME0PIPE0_PF_RQ_PENDING (1 << 8)
#define GDS_DMA_RQ_PENDING (1 << 9)
#define DB_CLEAN (1 << 12)
#define CB_CLEAN (1 << 13)
#define TA_BUSY (1 << 14)
#define GDS_BUSY (1 << 15)
#define WD_BUSY_NO_DMA (1 << 16)
#define VGT_BUSY (1 << 17)
#define IA_BUSY_NO_DMA (1 << 18)
#define IA_BUSY (1 << 19)
#define SX_BUSY (1 << 20)
#define WD_BUSY (1 << 21)
#define SPI_BUSY (1 << 22)
#define BCI_BUSY (1 << 23)
#define SC_BUSY (1 << 24)
#define PA_BUSY (1 << 25)
#define DB_BUSY (1 << 26)
#define CP_COHERENCY_BUSY (1 << 28)
#define CP_BUSY (1 << 29)
#define CB_BUSY (1 << 30)
#define GUI_ACTIVE (1 << 31)
#define GRBM_STATUS_SE0 0x8014
#define GRBM_STATUS_SE1 0x8018
#define GRBM_STATUS_SE2 0x8038
#define GRBM_STATUS_SE3 0x803C
#define SE_DB_CLEAN (1 << 1)
#define SE_CB_CLEAN (1 << 2)
#define SE_BCI_BUSY (1 << 22)
#define SE_VGT_BUSY (1 << 23)
#define SE_PA_BUSY (1 << 24)
#define SE_TA_BUSY (1 << 25)
#define SE_SX_BUSY (1 << 26)
#define SE_SPI_BUSY (1 << 27)
#define SE_SC_BUSY (1 << 29)
#define SE_DB_BUSY (1 << 30)
#define SE_CB_BUSY (1 << 31)
#define GRBM_SOFT_RESET 0x8020
#define SOFT_RESET_CP (1 << 0) /* All CP blocks */
#define SOFT_RESET_RLC (1 << 2) /* RLC */
#define SOFT_RESET_GFX (1 << 16) /* GFX */
#define SOFT_RESET_CPF (1 << 17) /* CP fetcher shared by gfx and compute */
#define SOFT_RESET_CPC (1 << 18) /* CP Compute (MEC1/2) */
#define SOFT_RESET_CPG (1 << 19) /* CP GFX (PFP, ME, CE) */
#define GRBM_INT_CNTL 0x8060
# define RDERR_INT_ENABLE (1 << 0)
# define GUI_IDLE_INT_ENABLE (1 << 19)
#define CP_CPC_STATUS 0x8210
#define CP_CPC_BUSY_STAT 0x8214
#define CP_CPC_STALLED_STAT1 0x8218
#define CP_CPF_STATUS 0x821c
#define CP_CPF_BUSY_STAT 0x8220
#define CP_CPF_STALLED_STAT1 0x8224
#define CP_MEC_CNTL 0x8234
#define MEC_ME2_HALT (1 << 28)
#define MEC_ME1_HALT (1 << 30)
#define CP_MEC_CNTL 0x8234
#define MEC_ME2_HALT (1 << 28)
#define MEC_ME1_HALT (1 << 30)
#define CP_STALLED_STAT3 0x8670
#define CP_STALLED_STAT1 0x8674
#define CP_STALLED_STAT2 0x8678
#define CP_STAT 0x8680
#define CP_ME_CNTL 0x86D8
#define CP_CE_HALT (1 << 24)
#define CP_PFP_HALT (1 << 26)
#define CP_ME_HALT (1 << 28)
#define CP_RB0_RPTR 0x8700
#define CP_RB_WPTR_DELAY 0x8704
#define CP_RB_WPTR_POLL_CNTL 0x8708
#define IDLE_POLL_COUNT(x) ((x) << 16)
#define IDLE_POLL_COUNT_MASK (0xffff << 16)
#define CP_MEQ_THRESHOLDS 0x8764
#define MEQ1_START(x) ((x) << 0)
#define MEQ2_START(x) ((x) << 8)
#define VGT_VTX_VECT_EJECT_REG 0x88B0
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x) << 0)
#define VC_ONLY 0
#define TC_ONLY 1
#define VC_AND_TC 2
#define AUTO_INVLD_EN(x) ((x) << 6)
#define NO_AUTO 0
#define ES_AUTO 1
#define GS_AUTO 2
#define ES_AND_GS_AUTO 3
#define VGT_GS_VERTEX_REUSE 0x88D4
#define CC_GC_SHADER_ARRAY_CONFIG 0x89bc
#define INACTIVE_CUS_MASK 0xFFFF0000
#define INACTIVE_CUS_SHIFT 16
#define GC_USER_SHADER_ARRAY_CONFIG 0x89c0
#define PA_CL_ENHANCE 0x8A14
#define CLIP_VTX_REORDER_ENA (1 << 0)
#define NUM_CLIP_SEQ(x) ((x) << 1)
#define PA_SC_FORCE_EOV_MAX_CNTS 0x8B24
#define FORCE_EOV_MAX_CLK_CNT(x) ((x) << 0)
#define FORCE_EOV_MAX_REZ_CNT(x) ((x) << 16)
#define PA_SC_FIFO_SIZE 0x8BCC
#define SC_FRONTEND_PRIM_FIFO_SIZE(x) ((x) << 0)
#define SC_BACKEND_PRIM_FIFO_SIZE(x) ((x) << 6)
#define SC_HIZ_TILE_FIFO_SIZE(x) ((x) << 15)
#define SC_EARLYZ_TILE_FIFO_SIZE(x) ((x) << 23)
#define PA_SC_ENHANCE 0x8BF0
#define ENABLE_PA_SC_OUT_OF_ORDER (1 << 0)
#define DISABLE_PA_SC_GUIDANCE (1 << 13)
#define SQ_CONFIG 0x8C00
#define SH_MEM_BASES 0x8C28
/* if PTR32, these are the bases for scratch and lds */
#define PRIVATE_BASE(x) ((x) << 0) /* scratch */
#define SHARED_BASE(x) ((x) << 16) /* LDS */
#define SH_MEM_APE1_BASE 0x8C2C
/* if PTR32, this is the base location of GPUVM */
#define SH_MEM_APE1_LIMIT 0x8C30
/* if PTR32, this is the upper limit of GPUVM */
#define SH_MEM_CONFIG 0x8C34
#define PTR32 (1 << 0)
#define ALIGNMENT_MODE(x) ((x) << 2)
#define SH_MEM_ALIGNMENT_MODE_DWORD 0
#define SH_MEM_ALIGNMENT_MODE_DWORD_STRICT 1
#define SH_MEM_ALIGNMENT_MODE_STRICT 2
#define SH_MEM_ALIGNMENT_MODE_UNALIGNED 3
#define DEFAULT_MTYPE(x) ((x) << 4)
#define APE1_MTYPE(x) ((x) << 7)
#define SX_DEBUG_1 0x9060
#define SPI_CONFIG_CNTL 0x9100
#define SPI_CONFIG_CNTL_1 0x913C
#define VTX_DONE_DELAY(x) ((x) << 0)
#define INTERP_ONE_PRIM_PER_ROW (1 << 4)
#define TA_CNTL_AUX 0x9508
#define DB_DEBUG 0x9830
#define DB_DEBUG2 0x9834
#define DB_DEBUG3 0x9838
#define CC_RB_BACKEND_DISABLE 0x98F4
#define BACKEND_DISABLE(x) ((x) << 16)
#define GB_ADDR_CONFIG 0x98F8
#define NUM_PIPES(x) ((x) << 0)
#define NUM_PIPES_MASK 0x00000007
#define NUM_PIPES_SHIFT 0
#define PIPE_INTERLEAVE_SIZE(x) ((x) << 4)
#define PIPE_INTERLEAVE_SIZE_MASK 0x00000070
#define PIPE_INTERLEAVE_SIZE_SHIFT 4
#define NUM_SHADER_ENGINES(x) ((x) << 12)
#define NUM_SHADER_ENGINES_MASK 0x00003000
#define NUM_SHADER_ENGINES_SHIFT 12
#define SHADER_ENGINE_TILE_SIZE(x) ((x) << 16)
#define SHADER_ENGINE_TILE_SIZE_MASK 0x00070000
#define SHADER_ENGINE_TILE_SIZE_SHIFT 16
#define ROW_SIZE(x) ((x) << 28)
#define ROW_SIZE_MASK 0x30000000
#define ROW_SIZE_SHIFT 28
#define GB_TILE_MODE0 0x9910
# define ARRAY_MODE(x) ((x) << 2)
# define ARRAY_LINEAR_GENERAL 0
# define ARRAY_LINEAR_ALIGNED 1
# define ARRAY_1D_TILED_THIN1 2
# define ARRAY_2D_TILED_THIN1 4
# define ARRAY_PRT_TILED_THIN1 5
# define ARRAY_PRT_2D_TILED_THIN1 6
# define PIPE_CONFIG(x) ((x) << 6)
# define ADDR_SURF_P2 0
# define ADDR_SURF_P4_8x16 4
# define ADDR_SURF_P4_16x16 5
# define ADDR_SURF_P4_16x32 6
# define ADDR_SURF_P4_32x32 7
# define ADDR_SURF_P8_16x16_8x16 8
# define ADDR_SURF_P8_16x32_8x16 9
# define ADDR_SURF_P8_32x32_8x16 10
# define ADDR_SURF_P8_16x32_16x16 11
# define ADDR_SURF_P8_32x32_16x16 12
# define ADDR_SURF_P8_32x32_16x32 13
# define ADDR_SURF_P8_32x64_32x32 14
# define TILE_SPLIT(x) ((x) << 11)
# define ADDR_SURF_TILE_SPLIT_64B 0
# define ADDR_SURF_TILE_SPLIT_128B 1
# define ADDR_SURF_TILE_SPLIT_256B 2
# define ADDR_SURF_TILE_SPLIT_512B 3
# define ADDR_SURF_TILE_SPLIT_1KB 4
# define ADDR_SURF_TILE_SPLIT_2KB 5
# define ADDR_SURF_TILE_SPLIT_4KB 6
# define MICRO_TILE_MODE_NEW(x) ((x) << 22)
# define ADDR_SURF_DISPLAY_MICRO_TILING 0
# define ADDR_SURF_THIN_MICRO_TILING 1
# define ADDR_SURF_DEPTH_MICRO_TILING 2
# define ADDR_SURF_ROTATED_MICRO_TILING 3
# define SAMPLE_SPLIT(x) ((x) << 25)
# define ADDR_SURF_SAMPLE_SPLIT_1 0
# define ADDR_SURF_SAMPLE_SPLIT_2 1
# define ADDR_SURF_SAMPLE_SPLIT_4 2
# define ADDR_SURF_SAMPLE_SPLIT_8 3
#define GB_MACROTILE_MODE0 0x9990
# define BANK_WIDTH(x) ((x) << 0)
# define ADDR_SURF_BANK_WIDTH_1 0
# define ADDR_SURF_BANK_WIDTH_2 1
# define ADDR_SURF_BANK_WIDTH_4 2
# define ADDR_SURF_BANK_WIDTH_8 3
# define BANK_HEIGHT(x) ((x) << 2)
# define ADDR_SURF_BANK_HEIGHT_1 0
# define ADDR_SURF_BANK_HEIGHT_2 1
# define ADDR_SURF_BANK_HEIGHT_4 2
# define ADDR_SURF_BANK_HEIGHT_8 3
# define MACRO_TILE_ASPECT(x) ((x) << 4)
# define ADDR_SURF_MACRO_ASPECT_1 0
# define ADDR_SURF_MACRO_ASPECT_2 1
# define ADDR_SURF_MACRO_ASPECT_4 2
# define ADDR_SURF_MACRO_ASPECT_8 3
# define NUM_BANKS(x) ((x) << 6)
# define ADDR_SURF_2_BANK 0
# define ADDR_SURF_4_BANK 1
# define ADDR_SURF_8_BANK 2
# define ADDR_SURF_16_BANK 3
#define CB_HW_CONTROL 0x9A10
#define GC_USER_RB_BACKEND_DISABLE 0x9B7C
#define BACKEND_DISABLE_MASK 0x00FF0000
#define BACKEND_DISABLE_SHIFT 16
#define TCP_CHAN_STEER_LO 0xac0c
#define TCP_CHAN_STEER_HI 0xac10
#define TC_CFG_L1_LOAD_POLICY0 0xAC68
#define TC_CFG_L1_LOAD_POLICY1 0xAC6C
#define TC_CFG_L1_STORE_POLICY 0xAC70
#define TC_CFG_L2_LOAD_POLICY0 0xAC74
#define TC_CFG_L2_LOAD_POLICY1 0xAC78
#define TC_CFG_L2_STORE_POLICY0 0xAC7C
#define TC_CFG_L2_STORE_POLICY1 0xAC80
#define TC_CFG_L2_ATOMIC_POLICY 0xAC84
#define TC_CFG_L1_VOLATILE 0xAC88
#define TC_CFG_L2_VOLATILE 0xAC8C
#define CP_RB0_BASE 0xC100
#define CP_RB0_CNTL 0xC104
#define RB_BUFSZ(x) ((x) << 0)
#define RB_BLKSZ(x) ((x) << 8)
#define BUF_SWAP_32BIT (2 << 16)
#define RB_NO_UPDATE (1 << 27)
#define RB_RPTR_WR_ENA (1 << 31)
#define CP_RB0_RPTR_ADDR 0xC10C
#define RB_RPTR_SWAP_32BIT (2 << 0)
#define CP_RB0_RPTR_ADDR_HI 0xC110
#define CP_RB0_WPTR 0xC114
#define CP_DEVICE_ID 0xC12C
#define CP_ENDIAN_SWAP 0xC140
#define CP_RB_VMID 0xC144
#define CP_PFP_UCODE_ADDR 0xC150
#define CP_PFP_UCODE_DATA 0xC154
#define CP_ME_RAM_RADDR 0xC158
#define CP_ME_RAM_WADDR 0xC15C
#define CP_ME_RAM_DATA 0xC160
#define CP_CE_UCODE_ADDR 0xC168
#define CP_CE_UCODE_DATA 0xC16C
#define CP_MEC_ME1_UCODE_ADDR 0xC170
#define CP_MEC_ME1_UCODE_DATA 0xC174
#define CP_MEC_ME2_UCODE_ADDR 0xC178
#define CP_MEC_ME2_UCODE_DATA 0xC17C
#define CP_INT_CNTL_RING0 0xC1A8
# define CNTX_BUSY_INT_ENABLE (1 << 19)
# define CNTX_EMPTY_INT_ENABLE (1 << 20)
# define PRIV_INSTR_INT_ENABLE (1 << 22)
# define PRIV_REG_INT_ENABLE (1 << 23)
# define TIME_STAMP_INT_ENABLE (1 << 26)
# define CP_RINGID2_INT_ENABLE (1 << 29)
# define CP_RINGID1_INT_ENABLE (1 << 30)
# define CP_RINGID0_INT_ENABLE (1 << 31)
#define CP_INT_STATUS_RING0 0xC1B4
# define PRIV_INSTR_INT_STAT (1 << 22)
# define PRIV_REG_INT_STAT (1 << 23)
# define TIME_STAMP_INT_STAT (1 << 26)
# define CP_RINGID2_INT_STAT (1 << 29)
# define CP_RINGID1_INT_STAT (1 << 30)
# define CP_RINGID0_INT_STAT (1 << 31)
#define CP_MEM_SLP_CNTL 0xC1E4
# define CP_MEM_LS_EN (1 << 0)
#define CP_CPF_DEBUG 0xC200
#define CP_PQ_WPTR_POLL_CNTL 0xC20C
#define WPTR_POLL_EN (1 << 31)
#define CP_ME1_PIPE0_INT_CNTL 0xC214
#define CP_ME1_PIPE1_INT_CNTL 0xC218
#define CP_ME1_PIPE2_INT_CNTL 0xC21C
#define CP_ME1_PIPE3_INT_CNTL 0xC220
#define CP_ME2_PIPE0_INT_CNTL 0xC224
#define CP_ME2_PIPE1_INT_CNTL 0xC228
#define CP_ME2_PIPE2_INT_CNTL 0xC22C
#define CP_ME2_PIPE3_INT_CNTL 0xC230
# define DEQUEUE_REQUEST_INT_ENABLE (1 << 13)
# define WRM_POLL_TIMEOUT_INT_ENABLE (1 << 17)
# define PRIV_REG_INT_ENABLE (1 << 23)
# define TIME_STAMP_INT_ENABLE (1 << 26)
# define GENERIC2_INT_ENABLE (1 << 29)
# define GENERIC1_INT_ENABLE (1 << 30)
# define GENERIC0_INT_ENABLE (1 << 31)
#define CP_ME1_PIPE0_INT_STATUS 0xC214
#define CP_ME1_PIPE1_INT_STATUS 0xC218
#define CP_ME1_PIPE2_INT_STATUS 0xC21C
#define CP_ME1_PIPE3_INT_STATUS 0xC220
#define CP_ME2_PIPE0_INT_STATUS 0xC224
#define CP_ME2_PIPE1_INT_STATUS 0xC228
#define CP_ME2_PIPE2_INT_STATUS 0xC22C
#define CP_ME2_PIPE3_INT_STATUS 0xC230
# define DEQUEUE_REQUEST_INT_STATUS (1 << 13)
# define WRM_POLL_TIMEOUT_INT_STATUS (1 << 17)
# define PRIV_REG_INT_STATUS (1 << 23)
# define TIME_STAMP_INT_STATUS (1 << 26)
# define GENERIC2_INT_STATUS (1 << 29)
# define GENERIC1_INT_STATUS (1 << 30)
# define GENERIC0_INT_STATUS (1 << 31)
#define CP_MAX_CONTEXT 0xC2B8
#define CP_RB0_BASE_HI 0xC2C4
#define RLC_CNTL 0xC300
# define RLC_ENABLE (1 << 0)
#define RLC_MC_CNTL 0xC30C
#define RLC_MEM_SLP_CNTL 0xC318
# define RLC_MEM_LS_EN (1 << 0)
#define RLC_LB_CNTR_MAX 0xC348
#define RLC_LB_CNTL 0xC364
# define LOAD_BALANCE_ENABLE (1 << 0)
#define RLC_LB_CNTR_INIT 0xC36C
#define RLC_SAVE_AND_RESTORE_BASE 0xC374
#define RLC_DRIVER_DMA_STATUS 0xC378 /* dGPU */
#define RLC_CP_TABLE_RESTORE 0xC378 /* APU */
#define RLC_PG_DELAY_2 0xC37C
#define RLC_GPM_UCODE_ADDR 0xC388
#define RLC_GPM_UCODE_DATA 0xC38C
#define RLC_GPU_CLOCK_COUNT_LSB 0xC390
#define RLC_GPU_CLOCK_COUNT_MSB 0xC394
#define RLC_CAPTURE_GPU_CLOCK_COUNT 0xC398
#define RLC_UCODE_CNTL 0xC39C
#define RLC_GPM_STAT 0xC400
# define RLC_GPM_BUSY (1 << 0)
# define GFX_POWER_STATUS (1 << 1)
# define GFX_CLOCK_STATUS (1 << 2)
#define RLC_PG_CNTL 0xC40C
# define GFX_PG_ENABLE (1 << 0)
# define GFX_PG_SRC (1 << 1)
# define DYN_PER_CU_PG_ENABLE (1 << 2)
# define STATIC_PER_CU_PG_ENABLE (1 << 3)
# define DISABLE_GDS_PG (1 << 13)
# define DISABLE_CP_PG (1 << 15)
# define SMU_CLK_SLOWDOWN_ON_PU_ENABLE (1 << 17)
# define SMU_CLK_SLOWDOWN_ON_PD_ENABLE (1 << 18)
#define RLC_CGTT_MGCG_OVERRIDE 0xC420
#define RLC_CGCG_CGLS_CTRL 0xC424
# define CGCG_EN (1 << 0)
# define CGLS_EN (1 << 1)
#define RLC_PG_DELAY 0xC434
#define RLC_LB_INIT_CU_MASK 0xC43C
#define RLC_LB_PARAMS 0xC444
#define RLC_PG_AO_CU_MASK 0xC44C
#define RLC_MAX_PG_CU 0xC450
# define MAX_PU_CU(x) ((x) << 0)
# define MAX_PU_CU_MASK (0xff << 0)
#define RLC_AUTO_PG_CTRL 0xC454
# define AUTO_PG_EN (1 << 0)
# define GRBM_REG_SGIT(x) ((x) << 3)
# define GRBM_REG_SGIT_MASK (0xffff << 3)
#define RLC_SERDES_WR_CU_MASTER_MASK 0xC474
#define RLC_SERDES_WR_NONCU_MASTER_MASK 0xC478
#define RLC_SERDES_WR_CTRL 0xC47C
#define BPM_ADDR(x) ((x) << 0)
#define BPM_ADDR_MASK (0xff << 0)
#define CGLS_ENABLE (1 << 16)
#define CGCG_OVERRIDE_0 (1 << 20)
#define MGCG_OVERRIDE_0 (1 << 22)
#define MGCG_OVERRIDE_1 (1 << 23)
#define RLC_SERDES_CU_MASTER_BUSY 0xC484
#define RLC_SERDES_NONCU_MASTER_BUSY 0xC488
# define SE_MASTER_BUSY_MASK 0x0000ffff
# define GC_MASTER_BUSY (1 << 16)
# define TC0_MASTER_BUSY (1 << 17)
# define TC1_MASTER_BUSY (1 << 18)
#define RLC_GPM_SCRATCH_ADDR 0xC4B0
#define RLC_GPM_SCRATCH_DATA 0xC4B4
#define RLC_GPR_REG2 0xC4E8
#define REQ 0x00000001
#define MESSAGE(x) ((x) << 1)
#define MESSAGE_MASK 0x0000001e
#define MSG_ENTER_RLC_SAFE_MODE 1
#define MSG_EXIT_RLC_SAFE_MODE 0
#define CP_HPD_EOP_BASE_ADDR 0xC904
#define CP_HPD_EOP_BASE_ADDR_HI 0xC908
#define CP_HPD_EOP_VMID 0xC90C
#define CP_HPD_EOP_CONTROL 0xC910
#define EOP_SIZE(x) ((x) << 0)
#define EOP_SIZE_MASK (0x3f << 0)
#define CP_MQD_BASE_ADDR 0xC914
#define CP_MQD_BASE_ADDR_HI 0xC918
#define CP_HQD_ACTIVE 0xC91C
#define CP_HQD_VMID 0xC920
#define CP_HQD_PQ_BASE 0xC934
#define CP_HQD_PQ_BASE_HI 0xC938
#define CP_HQD_PQ_RPTR 0xC93C
#define CP_HQD_PQ_RPTR_REPORT_ADDR 0xC940
#define CP_HQD_PQ_RPTR_REPORT_ADDR_HI 0xC944
#define CP_HQD_PQ_WPTR_POLL_ADDR 0xC948
#define CP_HQD_PQ_WPTR_POLL_ADDR_HI 0xC94C
#define CP_HQD_PQ_DOORBELL_CONTROL 0xC950
#define DOORBELL_OFFSET(x) ((x) << 2)
#define DOORBELL_OFFSET_MASK (0x1fffff << 2)
#define DOORBELL_SOURCE (1 << 28)
#define DOORBELL_SCHD_HIT (1 << 29)
#define DOORBELL_EN (1 << 30)
#define DOORBELL_HIT (1 << 31)
#define CP_HQD_PQ_WPTR 0xC954
#define CP_HQD_PQ_CONTROL 0xC958
#define QUEUE_SIZE(x) ((x) << 0)
#define QUEUE_SIZE_MASK (0x3f << 0)
#define RPTR_BLOCK_SIZE(x) ((x) << 8)
#define RPTR_BLOCK_SIZE_MASK (0x3f << 8)
#define PQ_VOLATILE (1 << 26)
#define NO_UPDATE_RPTR (1 << 27)
#define UNORD_DISPATCH (1 << 28)
#define ROQ_PQ_IB_FLIP (1 << 29)
#define PRIV_STATE (1 << 30)
#define KMD_QUEUE (1 << 31)
#define CP_HQD_DEQUEUE_REQUEST 0xC974
#define CP_MQD_CONTROL 0xC99C
#define MQD_VMID(x) ((x) << 0)
#define MQD_VMID_MASK (0xf << 0)
#define DB_RENDER_CONTROL 0x28000
#define PA_SC_RASTER_CONFIG 0x28350
# define RASTER_CONFIG_RB_MAP_0 0
# define RASTER_CONFIG_RB_MAP_1 1
# define RASTER_CONFIG_RB_MAP_2 2
# define RASTER_CONFIG_RB_MAP_3 3
#define VGT_EVENT_INITIATOR 0x28a90
# define SAMPLE_STREAMOUTSTATS1 (1 << 0)
# define SAMPLE_STREAMOUTSTATS2 (2 << 0)
# define SAMPLE_STREAMOUTSTATS3 (3 << 0)
# define CACHE_FLUSH_TS (4 << 0)
# define CACHE_FLUSH (6 << 0)
# define CS_PARTIAL_FLUSH (7 << 0)
# define VGT_STREAMOUT_RESET (10 << 0)
# define END_OF_PIPE_INCR_DE (11 << 0)
# define END_OF_PIPE_IB_END (12 << 0)
# define RST_PIX_CNT (13 << 0)
# define VS_PARTIAL_FLUSH (15 << 0)
# define PS_PARTIAL_FLUSH (16 << 0)
# define CACHE_FLUSH_AND_INV_TS_EVENT (20 << 0)
# define ZPASS_DONE (21 << 0)
# define CACHE_FLUSH_AND_INV_EVENT (22 << 0)
# define PERFCOUNTER_START (23 << 0)
# define PERFCOUNTER_STOP (24 << 0)
# define PIPELINESTAT_START (25 << 0)
# define PIPELINESTAT_STOP (26 << 0)
# define PERFCOUNTER_SAMPLE (27 << 0)
# define SAMPLE_PIPELINESTAT (30 << 0)
# define SO_VGT_STREAMOUT_FLUSH (31 << 0)
# define SAMPLE_STREAMOUTSTATS (32 << 0)
# define RESET_VTX_CNT (33 << 0)
# define VGT_FLUSH (36 << 0)
# define BOTTOM_OF_PIPE_TS (40 << 0)
# define DB_CACHE_FLUSH_AND_INV (42 << 0)
# define FLUSH_AND_INV_DB_DATA_TS (43 << 0)
# define FLUSH_AND_INV_DB_META (44 << 0)
# define FLUSH_AND_INV_CB_DATA_TS (45 << 0)
# define FLUSH_AND_INV_CB_META (46 << 0)
# define CS_DONE (47 << 0)
# define PS_DONE (48 << 0)
# define FLUSH_AND_INV_CB_PIXEL_DATA (49 << 0)
# define THREAD_TRACE_START (51 << 0)
# define THREAD_TRACE_STOP (52 << 0)
# define THREAD_TRACE_FLUSH (54 << 0)
# define THREAD_TRACE_FINISH (55 << 0)
# define PIXEL_PIPE_STAT_CONTROL (56 << 0)
# define PIXEL_PIPE_STAT_DUMP (57 << 0)
# define PIXEL_PIPE_STAT_RESET (58 << 0)
#define SCRATCH_REG0 0x30100
#define SCRATCH_REG1 0x30104
#define SCRATCH_REG2 0x30108
#define SCRATCH_REG3 0x3010C
#define SCRATCH_REG4 0x30110
#define SCRATCH_REG5 0x30114
#define SCRATCH_REG6 0x30118
#define SCRATCH_REG7 0x3011C
#define SCRATCH_UMSK 0x30140
#define SCRATCH_ADDR 0x30144
#define CP_SEM_WAIT_TIMER 0x301BC
#define CP_SEM_INCOMPLETE_TIMER_CNTL 0x301C8
#define CP_WAIT_REG_MEM_TIMEOUT 0x301D0
#define GRBM_GFX_INDEX 0x30800
#define INSTANCE_INDEX(x) ((x) << 0)
#define SH_INDEX(x) ((x) << 8)
#define SE_INDEX(x) ((x) << 16)
#define SH_BROADCAST_WRITES (1 << 29)
#define INSTANCE_BROADCAST_WRITES (1 << 30)
#define SE_BROADCAST_WRITES (1 << 31)
#define VGT_ESGS_RING_SIZE 0x30900
#define VGT_GSVS_RING_SIZE 0x30904
#define VGT_PRIMITIVE_TYPE 0x30908
#define VGT_INDEX_TYPE 0x3090C
#define VGT_NUM_INDICES 0x30930
#define VGT_NUM_INSTANCES 0x30934
#define VGT_TF_RING_SIZE 0x30938
#define VGT_HS_OFFCHIP_PARAM 0x3093C
#define VGT_TF_MEMORY_BASE 0x30940
#define PA_SU_LINE_STIPPLE_VALUE 0x30a00
#define PA_SC_LINE_STIPPLE_STATE 0x30a04
#define SQC_CACHES 0x30d20
#define CP_PERFMON_CNTL 0x36020
#define CGTS_SM_CTRL_REG 0x3c000
#define SM_MODE(x) ((x) << 17)
#define SM_MODE_MASK (0x7 << 17)
#define SM_MODE_ENABLE (1 << 20)
#define CGTS_OVERRIDE (1 << 21)
#define CGTS_LS_OVERRIDE (1 << 22)
#define ON_MONITOR_ADD_EN (1 << 23)
#define ON_MONITOR_ADD(x) ((x) << 24)
#define ON_MONITOR_ADD_MASK (0xff << 24)
#define CGTS_TCC_DISABLE 0x3c00c
#define CGTS_USER_TCC_DISABLE 0x3c010
#define TCC_DISABLE_MASK 0xFFFF0000
#define TCC_DISABLE_SHIFT 16
#define CB_CGTT_SCLK_CTRL 0x3c2a0
/*
* PM4
*/
#define PACKET_TYPE0 0
#define PACKET_TYPE1 1
#define PACKET_TYPE2 2
#define PACKET_TYPE3 3
#define CP_PACKET_GET_TYPE(h) (((h) >> 30) & 3)
#define CP_PACKET_GET_COUNT(h) (((h) >> 16) & 0x3FFF)
#define CP_PACKET0_GET_REG(h) (((h) & 0xFFFF) << 2)
#define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF)
#define PACKET0(reg, n) ((PACKET_TYPE0 << 30) | \
(((reg) >> 2) & 0xFFFF) | \
((n) & 0x3FFF) << 16)
#define CP_PACKET2 0x80000000
#define PACKET2_PAD_SHIFT 0
#define PACKET2_PAD_MASK (0x3fffffff << 0)
#define PACKET2(v) (CP_PACKET2 | REG_SET(PACKET2_PAD, (v)))
#define PACKET3(op, n) ((PACKET_TYPE3 << 30) | \
(((op) & 0xFF) << 8) | \
((n) & 0x3FFF) << 16)
#define PACKET3_COMPUTE(op, n) (PACKET3(op, n) | 1 << 1)
/* Packet 3 types */
#define PACKET3_NOP 0x10
#define PACKET3_SET_BASE 0x11
#define PACKET3_BASE_INDEX(x) ((x) << 0)
#define CE_PARTITION_BASE 3
#define PACKET3_CLEAR_STATE 0x12
#define PACKET3_INDEX_BUFFER_SIZE 0x13
#define PACKET3_DISPATCH_DIRECT 0x15
#define PACKET3_DISPATCH_INDIRECT 0x16
#define PACKET3_ATOMIC_GDS 0x1D
#define PACKET3_ATOMIC_MEM 0x1E
#define PACKET3_OCCLUSION_QUERY 0x1F
#define PACKET3_SET_PREDICATION 0x20
#define PACKET3_REG_RMW 0x21
#define PACKET3_COND_EXEC 0x22
#define PACKET3_PRED_EXEC 0x23
#define PACKET3_DRAW_INDIRECT 0x24
#define PACKET3_DRAW_INDEX_INDIRECT 0x25
#define PACKET3_INDEX_BASE 0x26
#define PACKET3_DRAW_INDEX_2 0x27
#define PACKET3_CONTEXT_CONTROL 0x28
#define PACKET3_INDEX_TYPE 0x2A
#define PACKET3_DRAW_INDIRECT_MULTI 0x2C
#define PACKET3_DRAW_INDEX_AUTO 0x2D
#define PACKET3_NUM_INSTANCES 0x2F
#define PACKET3_DRAW_INDEX_MULTI_AUTO 0x30
#define PACKET3_INDIRECT_BUFFER_CONST 0x33
#define PACKET3_STRMOUT_BUFFER_UPDATE 0x34
#define PACKET3_DRAW_INDEX_OFFSET_2 0x35
#define PACKET3_DRAW_PREAMBLE 0x36
#define PACKET3_WRITE_DATA 0x37
#define WRITE_DATA_DST_SEL(x) ((x) << 8)
/* 0 - register
* 1 - memory (sync - via GRBM)
* 2 - gl2
* 3 - gds
* 4 - reserved
* 5 - memory (async - direct)
*/
#define WR_ONE_ADDR (1 << 16)
#define WR_CONFIRM (1 << 20)
#define WRITE_DATA_CACHE_POLICY(x) ((x) << 25)
/* 0 - LRU
* 1 - Stream
*/
#define WRITE_DATA_ENGINE_SEL(x) ((x) << 30)
/* 0 - me
* 1 - pfp
* 2 - ce
*/
#define PACKET3_DRAW_INDEX_INDIRECT_MULTI 0x38
#define PACKET3_MEM_SEMAPHORE 0x39
# define PACKET3_SEM_USE_MAILBOX (0x1 << 16)
# define PACKET3_SEM_SEL_SIGNAL_TYPE (0x1 << 20) /* 0 = increment, 1 = write 1 */
# define PACKET3_SEM_CLIENT_CODE ((x) << 24) /* 0 = CP, 1 = CB, 2 = DB */
# define PACKET3_SEM_SEL_SIGNAL (0x6 << 29)
# define PACKET3_SEM_SEL_WAIT (0x7 << 29)
#define PACKET3_COPY_DW 0x3B
#define PACKET3_WAIT_REG_MEM 0x3C
#define WAIT_REG_MEM_FUNCTION(x) ((x) << 0)
/* 0 - always
* 1 - <
* 2 - <=
* 3 - ==
* 4 - !=
* 5 - >=
* 6 - >
*/
#define WAIT_REG_MEM_MEM_SPACE(x) ((x) << 4)
/* 0 - reg
* 1 - mem
*/
#define WAIT_REG_MEM_OPERATION(x) ((x) << 6)
/* 0 - wait_reg_mem
* 1 - wr_wait_wr_reg
*/
#define WAIT_REG_MEM_ENGINE(x) ((x) << 8)
/* 0 - me
* 1 - pfp
*/
#define PACKET3_INDIRECT_BUFFER 0x3F
#define INDIRECT_BUFFER_TCL2_VOLATILE (1 << 22)
#define INDIRECT_BUFFER_VALID (1 << 23)
#define INDIRECT_BUFFER_CACHE_POLICY(x) ((x) << 28)
/* 0 - LRU
* 1 - Stream
* 2 - Bypass
*/
#define PACKET3_COPY_DATA 0x40
#define PACKET3_PFP_SYNC_ME 0x42
#define PACKET3_SURFACE_SYNC 0x43
# define PACKET3_DEST_BASE_0_ENA (1 << 0)
# define PACKET3_DEST_BASE_1_ENA (1 << 1)
# define PACKET3_CB0_DEST_BASE_ENA (1 << 6)
# define PACKET3_CB1_DEST_BASE_ENA (1 << 7)
# define PACKET3_CB2_DEST_BASE_ENA (1 << 8)
# define PACKET3_CB3_DEST_BASE_ENA (1 << 9)
# define PACKET3_CB4_DEST_BASE_ENA (1 << 10)
# define PACKET3_CB5_DEST_BASE_ENA (1 << 11)
# define PACKET3_CB6_DEST_BASE_ENA (1 << 12)
# define PACKET3_CB7_DEST_BASE_ENA (1 << 13)
# define PACKET3_DB_DEST_BASE_ENA (1 << 14)
# define PACKET3_TCL1_VOL_ACTION_ENA (1 << 15)
# define PACKET3_TC_VOL_ACTION_ENA (1 << 16) /* L2 */
# define PACKET3_TC_WB_ACTION_ENA (1 << 18) /* L2 */
# define PACKET3_DEST_BASE_2_ENA (1 << 19)
# define PACKET3_DEST_BASE_3_ENA (1 << 21)
# define PACKET3_TCL1_ACTION_ENA (1 << 22)
# define PACKET3_TC_ACTION_ENA (1 << 23) /* L2 */
# define PACKET3_CB_ACTION_ENA (1 << 25)
# define PACKET3_DB_ACTION_ENA (1 << 26)
# define PACKET3_SH_KCACHE_ACTION_ENA (1 << 27)
# define PACKET3_SH_KCACHE_VOL_ACTION_ENA (1 << 28)
# define PACKET3_SH_ICACHE_ACTION_ENA (1 << 29)
#define PACKET3_COND_WRITE 0x45
#define PACKET3_EVENT_WRITE 0x46
#define EVENT_TYPE(x) ((x) << 0)
#define EVENT_INDEX(x) ((x) << 8)
/* 0 - any non-TS event
* 1 - ZPASS_DONE, PIXEL_PIPE_STAT_*
* 2 - SAMPLE_PIPELINESTAT
* 3 - SAMPLE_STREAMOUTSTAT*
* 4 - *S_PARTIAL_FLUSH
* 5 - EOP events
* 6 - EOS events
*/
#define PACKET3_EVENT_WRITE_EOP 0x47
#define EOP_TCL1_VOL_ACTION_EN (1 << 12)
#define EOP_TC_VOL_ACTION_EN (1 << 13) /* L2 */
#define EOP_TC_WB_ACTION_EN (1 << 15) /* L2 */
#define EOP_TCL1_ACTION_EN (1 << 16)
#define EOP_TC_ACTION_EN (1 << 17) /* L2 */
#define EOP_CACHE_POLICY(x) ((x) << 25)
/* 0 - LRU
* 1 - Stream
* 2 - Bypass
*/
#define EOP_TCL2_VOLATILE (1 << 27)
#define DATA_SEL(x) ((x) << 29)
/* 0 - discard
* 1 - send low 32bit data
* 2 - send 64bit data
* 3 - send 64bit GPU counter value
* 4 - send 64bit sys counter value
*/
#define INT_SEL(x) ((x) << 24)
/* 0 - none
* 1 - interrupt only (DATA_SEL = 0)
* 2 - interrupt when data write is confirmed
*/
#define DST_SEL(x) ((x) << 16)
/* 0 - MC
* 1 - TC/L2
*/
#define PACKET3_EVENT_WRITE_EOS 0x48
#define PACKET3_RELEASE_MEM 0x49
#define PACKET3_PREAMBLE_CNTL 0x4A
# define PACKET3_PREAMBLE_BEGIN_CLEAR_STATE (2 << 28)
# define PACKET3_PREAMBLE_END_CLEAR_STATE (3 << 28)
#define PACKET3_DMA_DATA 0x50
/* 1. header
* 2. CONTROL
* 3. SRC_ADDR_LO or DATA [31:0]
* 4. SRC_ADDR_HI [31:0]
* 5. DST_ADDR_LO [31:0]
* 6. DST_ADDR_HI [7:0]
* 7. COMMAND [30:21] | BYTE_COUNT [20:0]
*/
/* CONTROL */
# define PACKET3_DMA_DATA_ENGINE(x) ((x) << 0)
/* 0 - ME
* 1 - PFP
*/
# define PACKET3_DMA_DATA_SRC_CACHE_POLICY(x) ((x) << 13)
/* 0 - LRU
* 1 - Stream
* 2 - Bypass
*/
# define PACKET3_DMA_DATA_SRC_VOLATILE (1 << 15)
# define PACKET3_DMA_DATA_DST_SEL(x) ((x) << 20)
/* 0 - DST_ADDR using DAS
* 1 - GDS
* 3 - DST_ADDR using L2
*/
# define PACKET3_DMA_DATA_DST_CACHE_POLICY(x) ((x) << 25)
/* 0 - LRU
* 1 - Stream
* 2 - Bypass
*/
# define PACKET3_DMA_DATA_DST_VOLATILE (1 << 27)
# define PACKET3_DMA_DATA_SRC_SEL(x) ((x) << 29)
/* 0 - SRC_ADDR using SAS
* 1 - GDS
* 2 - DATA
* 3 - SRC_ADDR using L2
*/
# define PACKET3_DMA_DATA_CP_SYNC (1 << 31)
/* COMMAND */
# define PACKET3_DMA_DATA_DIS_WC (1 << 21)
# define PACKET3_DMA_DATA_CMD_SRC_SWAP(x) ((x) << 22)
/* 0 - none
* 1 - 8 in 16
* 2 - 8 in 32
* 3 - 8 in 64
*/
# define PACKET3_DMA_DATA_CMD_DST_SWAP(x) ((x) << 24)
/* 0 - none
* 1 - 8 in 16
* 2 - 8 in 32
* 3 - 8 in 64
*/
# define PACKET3_DMA_DATA_CMD_SAS (1 << 26)
/* 0 - memory
* 1 - register
*/
# define PACKET3_DMA_DATA_CMD_DAS (1 << 27)
/* 0 - memory
* 1 - register
*/
# define PACKET3_DMA_DATA_CMD_SAIC (1 << 28)
# define PACKET3_DMA_DATA_CMD_DAIC (1 << 29)
# define PACKET3_DMA_DATA_CMD_RAW_WAIT (1 << 30)
#define PACKET3_AQUIRE_MEM 0x58
#define PACKET3_REWIND 0x59
#define PACKET3_LOAD_UCONFIG_REG 0x5E
#define PACKET3_LOAD_SH_REG 0x5F
#define PACKET3_LOAD_CONFIG_REG 0x60
#define PACKET3_LOAD_CONTEXT_REG 0x61
#define PACKET3_SET_CONFIG_REG 0x68
#define PACKET3_SET_CONFIG_REG_START 0x00008000
#define PACKET3_SET_CONFIG_REG_END 0x0000b000
#define PACKET3_SET_CONTEXT_REG 0x69
#define PACKET3_SET_CONTEXT_REG_START 0x00028000
#define PACKET3_SET_CONTEXT_REG_END 0x00029000
#define PACKET3_SET_CONTEXT_REG_INDIRECT 0x73
#define PACKET3_SET_SH_REG 0x76
#define PACKET3_SET_SH_REG_START 0x0000b000
#define PACKET3_SET_SH_REG_END 0x0000c000
#define PACKET3_SET_SH_REG_OFFSET 0x77
#define PACKET3_SET_QUEUE_REG 0x78
#define PACKET3_SET_UCONFIG_REG 0x79
#define PACKET3_SET_UCONFIG_REG_START 0x00030000
#define PACKET3_SET_UCONFIG_REG_END 0x00031000
#define PACKET3_SCRATCH_RAM_WRITE 0x7D
#define PACKET3_SCRATCH_RAM_READ 0x7E
#define PACKET3_LOAD_CONST_RAM 0x80
#define PACKET3_WRITE_CONST_RAM 0x81
#define PACKET3_DUMP_CONST_RAM 0x83
#define PACKET3_INCREMENT_CE_COUNTER 0x84
#define PACKET3_INCREMENT_DE_COUNTER 0x85
#define PACKET3_WAIT_ON_CE_COUNTER 0x86
#define PACKET3_WAIT_ON_DE_COUNTER_DIFF 0x88
#define PACKET3_SWITCH_BUFFER 0x8B
/* SDMA - first instance at 0xd000, second at 0xd800 */
#define SDMA0_REGISTER_OFFSET 0x0 /* not a register */
#define SDMA1_REGISTER_OFFSET 0x800 /* not a register */
#define SDMA0_UCODE_ADDR 0xD000
#define SDMA0_UCODE_DATA 0xD004
#define SDMA0_POWER_CNTL 0xD008
#define SDMA0_CLK_CTRL 0xD00C
#define SDMA0_CNTL 0xD010
# define TRAP_ENABLE (1 << 0)
# define SEM_INCOMPLETE_INT_ENABLE (1 << 1)
# define SEM_WAIT_INT_ENABLE (1 << 2)
# define DATA_SWAP_ENABLE (1 << 3)
# define FENCE_SWAP_ENABLE (1 << 4)
# define AUTO_CTXSW_ENABLE (1 << 18)
# define CTXEMPTY_INT_ENABLE (1 << 28)
#define SDMA0_TILING_CONFIG 0xD018
#define SDMA0_SEM_INCOMPLETE_TIMER_CNTL 0xD020
#define SDMA0_SEM_WAIT_FAIL_TIMER_CNTL 0xD024
#define SDMA0_STATUS_REG 0xd034
# define SDMA_IDLE (1 << 0)
#define SDMA0_ME_CNTL 0xD048
# define SDMA_HALT (1 << 0)
#define SDMA0_GFX_RB_CNTL 0xD200
# define SDMA_RB_ENABLE (1 << 0)
# define SDMA_RB_SIZE(x) ((x) << 1) /* log2 */
# define SDMA_RB_SWAP_ENABLE (1 << 9) /* 8IN32 */
# define SDMA_RPTR_WRITEBACK_ENABLE (1 << 12)
# define SDMA_RPTR_WRITEBACK_SWAP_ENABLE (1 << 13) /* 8IN32 */
# define SDMA_RPTR_WRITEBACK_TIMER(x) ((x) << 16) /* log2 */
#define SDMA0_GFX_RB_BASE 0xD204
#define SDMA0_GFX_RB_BASE_HI 0xD208
#define SDMA0_GFX_RB_RPTR 0xD20C
#define SDMA0_GFX_RB_WPTR 0xD210
#define SDMA0_GFX_RB_RPTR_ADDR_HI 0xD220
#define SDMA0_GFX_RB_RPTR_ADDR_LO 0xD224
#define SDMA0_GFX_IB_CNTL 0xD228
# define SDMA_IB_ENABLE (1 << 0)
# define SDMA_IB_SWAP_ENABLE (1 << 4)
# define SDMA_SWITCH_INSIDE_IB (1 << 8)
# define SDMA_CMD_VMID(x) ((x) << 16)
#define SDMA0_GFX_VIRTUAL_ADDR 0xD29C
#define SDMA0_GFX_APE1_CNTL 0xD2A0
#define SDMA_PACKET(op, sub_op, e) ((((e) & 0xFFFF) << 16) | \
(((sub_op) & 0xFF) << 8) | \
(((op) & 0xFF) << 0))
/* sDMA opcodes */
#define SDMA_OPCODE_NOP 0
#define SDMA_OPCODE_COPY 1
# define SDMA_COPY_SUB_OPCODE_LINEAR 0
# define SDMA_COPY_SUB_OPCODE_TILED 1
# define SDMA_COPY_SUB_OPCODE_SOA 3
# define SDMA_COPY_SUB_OPCODE_LINEAR_SUB_WINDOW 4
# define SDMA_COPY_SUB_OPCODE_TILED_SUB_WINDOW 5
# define SDMA_COPY_SUB_OPCODE_T2T_SUB_WINDOW 6
#define SDMA_OPCODE_WRITE 2
# define SDMA_WRITE_SUB_OPCODE_LINEAR 0
# define SDMA_WRTIE_SUB_OPCODE_TILED 1
#define SDMA_OPCODE_INDIRECT_BUFFER 4
#define SDMA_OPCODE_FENCE 5
#define SDMA_OPCODE_TRAP 6
#define SDMA_OPCODE_SEMAPHORE 7
# define SDMA_SEMAPHORE_EXTRA_O (1 << 13)
/* 0 - increment
* 1 - write 1
*/
# define SDMA_SEMAPHORE_EXTRA_S (1 << 14)
/* 0 - wait
* 1 - signal
*/
# define SDMA_SEMAPHORE_EXTRA_M (1 << 15)
/* mailbox */
#define SDMA_OPCODE_POLL_REG_MEM 8
# define SDMA_POLL_REG_MEM_EXTRA_OP(x) ((x) << 10)
/* 0 - wait_reg_mem
* 1 - wr_wait_wr_reg
*/
# define SDMA_POLL_REG_MEM_EXTRA_FUNC(x) ((x) << 12)
/* 0 - always
* 1 - <
* 2 - <=
* 3 - ==
* 4 - !=
* 5 - >=
* 6 - >
*/
# define SDMA_POLL_REG_MEM_EXTRA_M (1 << 15)
/* 0 = register
* 1 = memory
*/
#define SDMA_OPCODE_COND_EXEC 9
#define SDMA_OPCODE_CONSTANT_FILL 11
# define SDMA_CONSTANT_FILL_EXTRA_SIZE(x) ((x) << 14)
/* 0 = byte fill
* 2 = DW fill
*/
#define SDMA_OPCODE_GENERATE_PTE_PDE 12
#define SDMA_OPCODE_TIMESTAMP 13
# define SDMA_TIMESTAMP_SUB_OPCODE_SET_LOCAL 0
# define SDMA_TIMESTAMP_SUB_OPCODE_GET_LOCAL 1
# define SDMA_TIMESTAMP_SUB_OPCODE_GET_GLOBAL 2
#define SDMA_OPCODE_SRBM_WRITE 14
# define SDMA_SRBM_WRITE_EXTRA_BYTE_ENABLE(x) ((x) << 12)
/* byte mask */
/* UVD */
#define UVD_UDEC_ADDR_CONFIG 0xef4c
#define UVD_UDEC_DB_ADDR_CONFIG 0xef50
#define UVD_UDEC_DBW_ADDR_CONFIG 0xef54
#define UVD_LMI_EXT40_ADDR 0xf498
#define UVD_LMI_ADDR_EXT 0xf594
#define UVD_VCPU_CACHE_OFFSET0 0xf608
#define UVD_VCPU_CACHE_SIZE0 0xf60c
#define UVD_VCPU_CACHE_OFFSET1 0xf610
#define UVD_VCPU_CACHE_SIZE1 0xf614
#define UVD_VCPU_CACHE_OFFSET2 0xf618
#define UVD_VCPU_CACHE_SIZE2 0xf61c
#define UVD_RBC_RB_RPTR 0xf690
#define UVD_RBC_RB_WPTR 0xf694
#define UVD_CGC_CTRL 0xF4B0
# define DCM (1 << 0)
# define CG_DT(x) ((x) << 2)
# define CG_DT_MASK (0xf << 2)
# define CLK_OD(x) ((x) << 6)
# define CLK_OD_MASK (0x1f << 6)
/* UVD clocks */
#define CG_DCLK_CNTL 0xC050009C
# define DCLK_DIVIDER_MASK 0x7f
# define DCLK_DIR_CNTL_EN (1 << 8)
#define CG_DCLK_STATUS 0xC05000A0
# define DCLK_STATUS (1 << 0)
#define CG_VCLK_CNTL 0xC05000A4
#define CG_VCLK_STATUS 0xC05000A8
/* UVD CTX indirect */
#define UVD_CGC_MEM_CTRL 0xC0
#endif