| /* |
| * Copyright 2008 Advanced Micro Devices, Inc. |
| * Copyright 2008 Red Hat Inc. |
| * Copyright 2009 Christian König. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: Christian König |
| */ |
| #include <linux/hdmi.h> |
| #include <drm/drmP.h> |
| #include <drm/radeon_drm.h> |
| #include "radeon.h" |
| #include "radeon_asic.h" |
| #include "r600d.h" |
| #include "atom.h" |
| |
| /* |
| * HDMI color format |
| */ |
| enum r600_hdmi_color_format { |
| RGB = 0, |
| YCC_422 = 1, |
| YCC_444 = 2 |
| }; |
| |
| /* |
| * IEC60958 status bits |
| */ |
| enum r600_hdmi_iec_status_bits { |
| AUDIO_STATUS_DIG_ENABLE = 0x01, |
| AUDIO_STATUS_V = 0x02, |
| AUDIO_STATUS_VCFG = 0x04, |
| AUDIO_STATUS_EMPHASIS = 0x08, |
| AUDIO_STATUS_COPYRIGHT = 0x10, |
| AUDIO_STATUS_NONAUDIO = 0x20, |
| AUDIO_STATUS_PROFESSIONAL = 0x40, |
| AUDIO_STATUS_LEVEL = 0x80 |
| }; |
| |
| static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = { |
| /* 32kHz 44.1kHz 48kHz */ |
| /* Clock N CTS N CTS N CTS */ |
| { 25174, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */ |
| { 25200, 4096, 25200, 6272, 28000, 6144, 25200 }, /* 25.20 MHz */ |
| { 27000, 4096, 27000, 6272, 30000, 6144, 27000 }, /* 27.00 MHz */ |
| { 27027, 4096, 27027, 6272, 30030, 6144, 27027 }, /* 27.00*1.001 MHz */ |
| { 54000, 4096, 54000, 6272, 60000, 6144, 54000 }, /* 54.00 MHz */ |
| { 54054, 4096, 54054, 6272, 60060, 6144, 54054 }, /* 54.00*1.001 MHz */ |
| { 74175, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */ |
| { 74250, 4096, 74250, 6272, 82500, 6144, 74250 }, /* 74.25 MHz */ |
| { 148351, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */ |
| { 148500, 4096, 148500, 6272, 165000, 6144, 148500 }, /* 148.50 MHz */ |
| { 0, 4096, 0, 6272, 0, 6144, 0 } /* Other */ |
| }; |
| |
| /* |
| * calculate CTS value if it's not found in the table |
| */ |
| static void r600_hdmi_calc_cts(uint32_t clock, int *CTS, int N, int freq) |
| { |
| if (*CTS == 0) |
| *CTS = clock * N / (128 * freq) * 1000; |
| DRM_DEBUG("Using ACR timing N=%d CTS=%d for frequency %d\n", |
| N, *CTS, freq); |
| } |
| |
| struct radeon_hdmi_acr r600_hdmi_acr(uint32_t clock) |
| { |
| struct radeon_hdmi_acr res; |
| u8 i; |
| |
| for (i = 0; r600_hdmi_predefined_acr[i].clock != clock && |
| r600_hdmi_predefined_acr[i].clock != 0; i++) |
| ; |
| res = r600_hdmi_predefined_acr[i]; |
| |
| /* In case some CTS are missing */ |
| r600_hdmi_calc_cts(clock, &res.cts_32khz, res.n_32khz, 32000); |
| r600_hdmi_calc_cts(clock, &res.cts_44_1khz, res.n_44_1khz, 44100); |
| r600_hdmi_calc_cts(clock, &res.cts_48khz, res.n_48khz, 48000); |
| |
| return res; |
| } |
| |
| /* |
| * update the N and CTS parameters for a given pixel clock rate |
| */ |
| static void r600_hdmi_update_ACR(struct drm_encoder *encoder, uint32_t clock) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_hdmi_acr acr = r600_hdmi_acr(clock); |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| uint32_t offset = dig->afmt->offset; |
| |
| WREG32(HDMI0_ACR_32_0 + offset, HDMI0_ACR_CTS_32(acr.cts_32khz)); |
| WREG32(HDMI0_ACR_32_1 + offset, acr.n_32khz); |
| |
| WREG32(HDMI0_ACR_44_0 + offset, HDMI0_ACR_CTS_44(acr.cts_44_1khz)); |
| WREG32(HDMI0_ACR_44_1 + offset, acr.n_44_1khz); |
| |
| WREG32(HDMI0_ACR_48_0 + offset, HDMI0_ACR_CTS_48(acr.cts_48khz)); |
| WREG32(HDMI0_ACR_48_1 + offset, acr.n_48khz); |
| } |
| |
| /* |
| * build a HDMI Video Info Frame |
| */ |
| static void r600_hdmi_update_avi_infoframe(struct drm_encoder *encoder, |
| void *buffer, size_t size) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| uint32_t offset = dig->afmt->offset; |
| uint8_t *frame = buffer + 3; |
| uint8_t *header = buffer; |
| |
| WREG32(HDMI0_AVI_INFO0 + offset, |
| frame[0x0] | (frame[0x1] << 8) | (frame[0x2] << 16) | (frame[0x3] << 24)); |
| WREG32(HDMI0_AVI_INFO1 + offset, |
| frame[0x4] | (frame[0x5] << 8) | (frame[0x6] << 16) | (frame[0x7] << 24)); |
| WREG32(HDMI0_AVI_INFO2 + offset, |
| frame[0x8] | (frame[0x9] << 8) | (frame[0xA] << 16) | (frame[0xB] << 24)); |
| WREG32(HDMI0_AVI_INFO3 + offset, |
| frame[0xC] | (frame[0xD] << 8) | (header[1] << 24)); |
| } |
| |
| /* |
| * build a Audio Info Frame |
| */ |
| static void r600_hdmi_update_audio_infoframe(struct drm_encoder *encoder, |
| const void *buffer, size_t size) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| uint32_t offset = dig->afmt->offset; |
| const u8 *frame = buffer + 3; |
| |
| WREG32(HDMI0_AUDIO_INFO0 + offset, |
| frame[0x0] | (frame[0x1] << 8) | (frame[0x2] << 16) | (frame[0x3] << 24)); |
| WREG32(HDMI0_AUDIO_INFO1 + offset, |
| frame[0x4] | (frame[0x5] << 8) | (frame[0x6] << 16) | (frame[0x8] << 24)); |
| } |
| |
| /* |
| * test if audio buffer is filled enough to start playing |
| */ |
| static bool r600_hdmi_is_audio_buffer_filled(struct drm_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| uint32_t offset = dig->afmt->offset; |
| |
| return (RREG32(HDMI0_STATUS + offset) & 0x10) != 0; |
| } |
| |
| /* |
| * have buffer status changed since last call? |
| */ |
| int r600_hdmi_buffer_status_changed(struct drm_encoder *encoder) |
| { |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| int status, result; |
| |
| if (!dig->afmt || !dig->afmt->enabled) |
| return 0; |
| |
| status = r600_hdmi_is_audio_buffer_filled(encoder); |
| result = dig->afmt->last_buffer_filled_status != status; |
| dig->afmt->last_buffer_filled_status = status; |
| |
| return result; |
| } |
| |
| /* |
| * write the audio workaround status to the hardware |
| */ |
| static void r600_hdmi_audio_workaround(struct drm_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| uint32_t offset = dig->afmt->offset; |
| bool hdmi_audio_workaround = false; /* FIXME */ |
| u32 value; |
| |
| if (!hdmi_audio_workaround || |
| r600_hdmi_is_audio_buffer_filled(encoder)) |
| value = 0; /* disable workaround */ |
| else |
| value = HDMI0_AUDIO_TEST_EN; /* enable workaround */ |
| WREG32_P(HDMI0_AUDIO_PACKET_CONTROL + offset, |
| value, ~HDMI0_AUDIO_TEST_EN); |
| } |
| |
| void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| u32 base_rate = 24000; |
| u32 max_ratio = clock / base_rate; |
| u32 dto_phase; |
| u32 dto_modulo = clock; |
| u32 wallclock_ratio; |
| u32 dto_cntl; |
| |
| if (!dig || !dig->afmt) |
| return; |
| |
| if (max_ratio >= 8) { |
| dto_phase = 192 * 1000; |
| wallclock_ratio = 3; |
| } else if (max_ratio >= 4) { |
| dto_phase = 96 * 1000; |
| wallclock_ratio = 2; |
| } else if (max_ratio >= 2) { |
| dto_phase = 48 * 1000; |
| wallclock_ratio = 1; |
| } else { |
| dto_phase = 24 * 1000; |
| wallclock_ratio = 0; |
| } |
| |
| /* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT. |
| * doesn't matter which one you use. Just use the first one. |
| */ |
| /* XXX two dtos; generally use dto0 for hdmi */ |
| /* Express [24MHz / target pixel clock] as an exact rational |
| * number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE |
| * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator |
| */ |
| if (ASIC_IS_DCE32(rdev)) { |
| if (dig->dig_encoder == 0) { |
| dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK; |
| dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio); |
| WREG32(DCCG_AUDIO_DTO0_CNTL, dto_cntl); |
| WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase); |
| WREG32(DCCG_AUDIO_DTO0_MODULE, dto_modulo); |
| WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */ |
| } else { |
| dto_cntl = RREG32(DCCG_AUDIO_DTO1_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK; |
| dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio); |
| WREG32(DCCG_AUDIO_DTO1_CNTL, dto_cntl); |
| WREG32(DCCG_AUDIO_DTO1_PHASE, dto_phase); |
| WREG32(DCCG_AUDIO_DTO1_MODULE, dto_modulo); |
| WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */ |
| } |
| } else if (ASIC_IS_DCE3(rdev)) { |
| /* according to the reg specs, this should DCE3.2 only, but in |
| * practice it seems to cover DCE3.0/3.1 as well. |
| */ |
| if (dig->dig_encoder == 0) { |
| WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100); |
| WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100); |
| WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */ |
| } else { |
| WREG32(DCCG_AUDIO_DTO1_PHASE, base_rate * 100); |
| WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100); |
| WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */ |
| } |
| } else { |
| /* according to the reg specs, this should be DCE2.0 and DCE3.0/3.1 */ |
| WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) | |
| AUDIO_DTO_MODULE(clock / 10)); |
| } |
| } |
| |
| static void dce3_2_afmt_write_speaker_allocation(struct drm_encoder *encoder) |
| { |
| struct radeon_device *rdev = encoder->dev->dev_private; |
| struct drm_connector *connector; |
| struct radeon_connector *radeon_connector = NULL; |
| u32 tmp; |
| u8 *sadb; |
| int sad_count; |
| |
| list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) { |
| if (connector->encoder == encoder) { |
| radeon_connector = to_radeon_connector(connector); |
| break; |
| } |
| } |
| |
| if (!radeon_connector) { |
| DRM_ERROR("Couldn't find encoder's connector\n"); |
| return; |
| } |
| |
| sad_count = drm_edid_to_speaker_allocation(radeon_connector->edid, &sadb); |
| if (sad_count < 0) { |
| DRM_ERROR("Couldn't read Speaker Allocation Data Block: %d\n", sad_count); |
| return; |
| } |
| |
| /* program the speaker allocation */ |
| tmp = RREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER); |
| tmp &= ~(DP_CONNECTION | SPEAKER_ALLOCATION_MASK); |
| /* set HDMI mode */ |
| tmp |= HDMI_CONNECTION; |
| if (sad_count) |
| tmp |= SPEAKER_ALLOCATION(sadb[0]); |
| else |
| tmp |= SPEAKER_ALLOCATION(5); /* stereo */ |
| WREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER, tmp); |
| |
| kfree(sadb); |
| } |
| |
| static void dce3_2_afmt_write_sad_regs(struct drm_encoder *encoder) |
| { |
| struct radeon_device *rdev = encoder->dev->dev_private; |
| struct drm_connector *connector; |
| struct radeon_connector *radeon_connector = NULL; |
| struct cea_sad *sads; |
| int i, sad_count; |
| |
| static const u16 eld_reg_to_type[][2] = { |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR0, HDMI_AUDIO_CODING_TYPE_PCM }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR1, HDMI_AUDIO_CODING_TYPE_AC3 }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR2, HDMI_AUDIO_CODING_TYPE_MPEG1 }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR3, HDMI_AUDIO_CODING_TYPE_MP3 }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR4, HDMI_AUDIO_CODING_TYPE_MPEG2 }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR5, HDMI_AUDIO_CODING_TYPE_AAC_LC }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR6, HDMI_AUDIO_CODING_TYPE_DTS }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR7, HDMI_AUDIO_CODING_TYPE_ATRAC }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR9, HDMI_AUDIO_CODING_TYPE_EAC3 }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR10, HDMI_AUDIO_CODING_TYPE_DTS_HD }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR11, HDMI_AUDIO_CODING_TYPE_MLP }, |
| { AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR13, HDMI_AUDIO_CODING_TYPE_WMA_PRO }, |
| }; |
| |
| list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) { |
| if (connector->encoder == encoder) { |
| radeon_connector = to_radeon_connector(connector); |
| break; |
| } |
| } |
| |
| if (!radeon_connector) { |
| DRM_ERROR("Couldn't find encoder's connector\n"); |
| return; |
| } |
| |
| sad_count = drm_edid_to_sad(radeon_connector->edid, &sads); |
| if (sad_count < 0) { |
| DRM_ERROR("Couldn't read SADs: %d\n", sad_count); |
| return; |
| } |
| BUG_ON(!sads); |
| |
| for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) { |
| u32 value = 0; |
| int j; |
| |
| for (j = 0; j < sad_count; j++) { |
| struct cea_sad *sad = &sads[j]; |
| |
| if (sad->format == eld_reg_to_type[i][1]) { |
| value = MAX_CHANNELS(sad->channels) | |
| DESCRIPTOR_BYTE_2(sad->byte2) | |
| SUPPORTED_FREQUENCIES(sad->freq); |
| if (sad->format == HDMI_AUDIO_CODING_TYPE_PCM) |
| value |= SUPPORTED_FREQUENCIES_STEREO(sad->freq); |
| break; |
| } |
| } |
| WREG32(eld_reg_to_type[i][0], value); |
| } |
| |
| kfree(sads); |
| } |
| |
| /* |
| * update the info frames with the data from the current display mode |
| */ |
| void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mode) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE]; |
| struct hdmi_avi_infoframe frame; |
| uint32_t offset; |
| ssize_t err; |
| |
| if (!dig || !dig->afmt) |
| return; |
| |
| /* Silent, r600_hdmi_enable will raise WARN for us */ |
| if (!dig->afmt->enabled) |
| return; |
| offset = dig->afmt->offset; |
| |
| r600_audio_set_dto(encoder, mode->clock); |
| |
| WREG32(HDMI0_VBI_PACKET_CONTROL + offset, |
| HDMI0_NULL_SEND); /* send null packets when required */ |
| |
| WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000); |
| |
| if (ASIC_IS_DCE32(rdev)) { |
| WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset, |
| HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */ |
| HDMI0_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */ |
| WREG32(AFMT_AUDIO_PACKET_CONTROL + offset, |
| AFMT_AUDIO_SAMPLE_SEND | /* send audio packets */ |
| AFMT_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */ |
| } else { |
| WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset, |
| HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */ |
| HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */ |
| HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */ |
| HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */ |
| } |
| |
| if (ASIC_IS_DCE32(rdev)) { |
| dce3_2_afmt_write_speaker_allocation(encoder); |
| dce3_2_afmt_write_sad_regs(encoder); |
| } |
| |
| WREG32(HDMI0_ACR_PACKET_CONTROL + offset, |
| HDMI0_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */ |
| HDMI0_ACR_SOURCE); /* select SW CTS value */ |
| |
| WREG32(HDMI0_VBI_PACKET_CONTROL + offset, |
| HDMI0_NULL_SEND | /* send null packets when required */ |
| HDMI0_GC_SEND | /* send general control packets */ |
| HDMI0_GC_CONT); /* send general control packets every frame */ |
| |
| /* TODO: HDMI0_AUDIO_INFO_UPDATE */ |
| WREG32(HDMI0_INFOFRAME_CONTROL0 + offset, |
| HDMI0_AVI_INFO_SEND | /* enable AVI info frames */ |
| HDMI0_AVI_INFO_CONT | /* send AVI info frames every frame/field */ |
| HDMI0_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */ |
| HDMI0_AUDIO_INFO_CONT); /* send audio info frames every frame/field */ |
| |
| WREG32(HDMI0_INFOFRAME_CONTROL1 + offset, |
| HDMI0_AVI_INFO_LINE(2) | /* anything other than 0 */ |
| HDMI0_AUDIO_INFO_LINE(2)); /* anything other than 0 */ |
| |
| WREG32(HDMI0_GC + offset, 0); /* unset HDMI0_GC_AVMUTE */ |
| |
| err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode); |
| if (err < 0) { |
| DRM_ERROR("failed to setup AVI infoframe: %zd\n", err); |
| return; |
| } |
| |
| err = hdmi_avi_infoframe_pack(&frame, buffer, sizeof(buffer)); |
| if (err < 0) { |
| DRM_ERROR("failed to pack AVI infoframe: %zd\n", err); |
| return; |
| } |
| |
| r600_hdmi_update_avi_infoframe(encoder, buffer, sizeof(buffer)); |
| r600_hdmi_update_ACR(encoder, mode->clock); |
| |
| /* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */ |
| WREG32(HDMI0_RAMP_CONTROL0 + offset, 0x00FFFFFF); |
| WREG32(HDMI0_RAMP_CONTROL1 + offset, 0x007FFFFF); |
| WREG32(HDMI0_RAMP_CONTROL2 + offset, 0x00000001); |
| WREG32(HDMI0_RAMP_CONTROL3 + offset, 0x00000001); |
| |
| r600_hdmi_audio_workaround(encoder); |
| } |
| |
| /* |
| * update settings with current parameters from audio engine |
| */ |
| void r600_hdmi_update_audio_settings(struct drm_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| struct r600_audio_pin audio = r600_audio_status(rdev); |
| uint8_t buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AUDIO_INFOFRAME_SIZE]; |
| struct hdmi_audio_infoframe frame; |
| uint32_t offset; |
| uint32_t iec; |
| ssize_t err; |
| |
| if (!dig->afmt || !dig->afmt->enabled) |
| return; |
| offset = dig->afmt->offset; |
| |
| DRM_DEBUG("%s with %d channels, %d Hz sampling rate, %d bits per sample,\n", |
| r600_hdmi_is_audio_buffer_filled(encoder) ? "playing" : "stopped", |
| audio.channels, audio.rate, audio.bits_per_sample); |
| DRM_DEBUG("0x%02X IEC60958 status bits and 0x%02X category code\n", |
| (int)audio.status_bits, (int)audio.category_code); |
| |
| iec = 0; |
| if (audio.status_bits & AUDIO_STATUS_PROFESSIONAL) |
| iec |= 1 << 0; |
| if (audio.status_bits & AUDIO_STATUS_NONAUDIO) |
| iec |= 1 << 1; |
| if (audio.status_bits & AUDIO_STATUS_COPYRIGHT) |
| iec |= 1 << 2; |
| if (audio.status_bits & AUDIO_STATUS_EMPHASIS) |
| iec |= 1 << 3; |
| |
| iec |= HDMI0_60958_CS_CATEGORY_CODE(audio.category_code); |
| |
| switch (audio.rate) { |
| case 32000: |
| iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x3); |
| break; |
| case 44100: |
| iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x0); |
| break; |
| case 48000: |
| iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x2); |
| break; |
| case 88200: |
| iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0x8); |
| break; |
| case 96000: |
| iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xa); |
| break; |
| case 176400: |
| iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xc); |
| break; |
| case 192000: |
| iec |= HDMI0_60958_CS_SAMPLING_FREQUENCY(0xe); |
| break; |
| } |
| |
| WREG32(HDMI0_60958_0 + offset, iec); |
| |
| iec = 0; |
| switch (audio.bits_per_sample) { |
| case 16: |
| iec |= HDMI0_60958_CS_WORD_LENGTH(0x2); |
| break; |
| case 20: |
| iec |= HDMI0_60958_CS_WORD_LENGTH(0x3); |
| break; |
| case 24: |
| iec |= HDMI0_60958_CS_WORD_LENGTH(0xb); |
| break; |
| } |
| if (audio.status_bits & AUDIO_STATUS_V) |
| iec |= 0x5 << 16; |
| WREG32_P(HDMI0_60958_1 + offset, iec, ~0x5000f); |
| |
| err = hdmi_audio_infoframe_init(&frame); |
| if (err < 0) { |
| DRM_ERROR("failed to setup audio infoframe\n"); |
| return; |
| } |
| |
| frame.channels = audio.channels; |
| |
| err = hdmi_audio_infoframe_pack(&frame, buffer, sizeof(buffer)); |
| if (err < 0) { |
| DRM_ERROR("failed to pack audio infoframe\n"); |
| return; |
| } |
| |
| r600_hdmi_update_audio_infoframe(encoder, buffer, sizeof(buffer)); |
| r600_hdmi_audio_workaround(encoder); |
| } |
| |
| /* |
| * enable the HDMI engine |
| */ |
| void r600_hdmi_enable(struct drm_encoder *encoder, bool enable) |
| { |
| struct drm_device *dev = encoder->dev; |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); |
| struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; |
| u32 hdmi = HDMI0_ERROR_ACK; |
| |
| if (!dig || !dig->afmt) |
| return; |
| |
| /* Silent, r600_hdmi_enable will raise WARN for us */ |
| if (enable && dig->afmt->enabled) |
| return; |
| if (!enable && !dig->afmt->enabled) |
| return; |
| |
| if (enable) |
| dig->afmt->pin = r600_audio_get_pin(rdev); |
| else |
| dig->afmt->pin = NULL; |
| |
| /* Older chipsets require setting HDMI and routing manually */ |
| if (!ASIC_IS_DCE3(rdev)) { |
| if (enable) |
| hdmi |= HDMI0_ENABLE; |
| switch (radeon_encoder->encoder_id) { |
| case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1: |
| if (enable) { |
| WREG32_OR(AVIVO_TMDSA_CNTL, AVIVO_TMDSA_CNTL_HDMI_EN); |
| hdmi |= HDMI0_STREAM(HDMI0_STREAM_TMDSA); |
| } else { |
| WREG32_AND(AVIVO_TMDSA_CNTL, ~AVIVO_TMDSA_CNTL_HDMI_EN); |
| } |
| break; |
| case ENCODER_OBJECT_ID_INTERNAL_LVTM1: |
| if (enable) { |
| WREG32_OR(AVIVO_LVTMA_CNTL, AVIVO_LVTMA_CNTL_HDMI_EN); |
| hdmi |= HDMI0_STREAM(HDMI0_STREAM_LVTMA); |
| } else { |
| WREG32_AND(AVIVO_LVTMA_CNTL, ~AVIVO_LVTMA_CNTL_HDMI_EN); |
| } |
| break; |
| case ENCODER_OBJECT_ID_INTERNAL_DDI: |
| if (enable) { |
| WREG32_OR(DDIA_CNTL, DDIA_HDMI_EN); |
| hdmi |= HDMI0_STREAM(HDMI0_STREAM_DDIA); |
| } else { |
| WREG32_AND(DDIA_CNTL, ~DDIA_HDMI_EN); |
| } |
| break; |
| case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1: |
| if (enable) |
| hdmi |= HDMI0_STREAM(HDMI0_STREAM_DVOA); |
| break; |
| default: |
| dev_err(rdev->dev, "Invalid encoder for HDMI: 0x%X\n", |
| radeon_encoder->encoder_id); |
| break; |
| } |
| WREG32(HDMI0_CONTROL + dig->afmt->offset, hdmi); |
| } |
| |
| if (rdev->irq.installed) { |
| /* if irq is available use it */ |
| /* XXX: shouldn't need this on any asics. Double check DCE2/3 */ |
| if (enable) |
| radeon_irq_kms_enable_afmt(rdev, dig->afmt->id); |
| else |
| radeon_irq_kms_disable_afmt(rdev, dig->afmt->id); |
| } |
| |
| dig->afmt->enabled = enable; |
| |
| DRM_DEBUG("%sabling HDMI interface @ 0x%04X for encoder 0x%x\n", |
| enable ? "En" : "Dis", dig->afmt->offset, radeon_encoder->encoder_id); |
| } |
| |