| /* |
| * saa7191.c - Philips SAA7191 video decoder driver |
| * |
| * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org> |
| * Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/major.h> |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| |
| #include <linux/videodev2.h> |
| #include <linux/i2c.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/v4l2-i2c-drv.h> |
| |
| #include "saa7191.h" |
| |
| #define SAA7191_MODULE_VERSION "0.0.5" |
| |
| MODULE_DESCRIPTION("Philips SAA7191 video decoder driver"); |
| MODULE_VERSION(SAA7191_MODULE_VERSION); |
| MODULE_AUTHOR("Mikael Nousiainen <tmnousia@cc.hut.fi>"); |
| MODULE_LICENSE("GPL"); |
| |
| |
| // #define SAA7191_DEBUG |
| |
| #ifdef SAA7191_DEBUG |
| #define dprintk(x...) printk("SAA7191: " x); |
| #else |
| #define dprintk(x...) |
| #endif |
| |
| #define SAA7191_SYNC_COUNT 30 |
| #define SAA7191_SYNC_DELAY 100 /* milliseconds */ |
| |
| struct saa7191 { |
| struct v4l2_subdev sd; |
| |
| /* the register values are stored here as the actual |
| * I2C-registers are write-only */ |
| u8 reg[25]; |
| |
| int input; |
| v4l2_std_id norm; |
| }; |
| |
| static inline struct saa7191 *to_saa7191(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct saa7191, sd); |
| } |
| |
| static const u8 initseq[] = { |
| 0, /* Subaddress */ |
| |
| 0x50, /* (0x50) SAA7191_REG_IDEL */ |
| |
| /* 50 Hz signal timing */ |
| 0x30, /* (0x30) SAA7191_REG_HSYB */ |
| 0x00, /* (0x00) SAA7191_REG_HSYS */ |
| 0xe8, /* (0xe8) SAA7191_REG_HCLB */ |
| 0xb6, /* (0xb6) SAA7191_REG_HCLS */ |
| 0xf4, /* (0xf4) SAA7191_REG_HPHI */ |
| |
| /* control */ |
| SAA7191_LUMA_APER_1, /* (0x01) SAA7191_REG_LUMA - CVBS mode */ |
| 0x00, /* (0x00) SAA7191_REG_HUEC */ |
| 0xf8, /* (0xf8) SAA7191_REG_CKTQ */ |
| 0xf8, /* (0xf8) SAA7191_REG_CKTS */ |
| 0x90, /* (0x90) SAA7191_REG_PLSE */ |
| 0x90, /* (0x90) SAA7191_REG_SESE */ |
| 0x00, /* (0x00) SAA7191_REG_GAIN */ |
| SAA7191_STDC_NFEN | SAA7191_STDC_HRMV, /* (0x0c) SAA7191_REG_STDC |
| * - not SECAM, |
| * slow time constant */ |
| SAA7191_IOCK_OEDC | SAA7191_IOCK_OEHS | SAA7191_IOCK_OEVS |
| | SAA7191_IOCK_OEDY, /* (0x78) SAA7191_REG_IOCK |
| * - chroma from CVBS, GPSW1 & 2 off */ |
| SAA7191_CTL3_AUFD | SAA7191_CTL3_SCEN | SAA7191_CTL3_OFTS |
| | SAA7191_CTL3_YDEL0, /* (0x99) SAA7191_REG_CTL3 |
| * - automatic field detection */ |
| 0x00, /* (0x00) SAA7191_REG_CTL4 */ |
| 0x2c, /* (0x2c) SAA7191_REG_CHCV - PAL nominal value */ |
| 0x00, /* unused */ |
| 0x00, /* unused */ |
| |
| /* 60 Hz signal timing */ |
| 0x34, /* (0x34) SAA7191_REG_HS6B */ |
| 0x0a, /* (0x0a) SAA7191_REG_HS6S */ |
| 0xf4, /* (0xf4) SAA7191_REG_HC6B */ |
| 0xce, /* (0xce) SAA7191_REG_HC6S */ |
| 0xf4, /* (0xf4) SAA7191_REG_HP6I */ |
| }; |
| |
| /* SAA7191 register handling */ |
| |
| static u8 saa7191_read_reg(struct v4l2_subdev *sd, u8 reg) |
| { |
| return to_saa7191(sd)->reg[reg]; |
| } |
| |
| static int saa7191_read_status(struct v4l2_subdev *sd, u8 *value) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret; |
| |
| ret = i2c_master_recv(client, value, 1); |
| if (ret < 0) { |
| printk(KERN_ERR "SAA7191: saa7191_read_status(): read failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int saa7191_write_reg(struct v4l2_subdev *sd, u8 reg, u8 value) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| to_saa7191(sd)->reg[reg] = value; |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| /* the first byte of data must be the first subaddress number (register) */ |
| static int saa7191_write_block(struct v4l2_subdev *sd, |
| u8 length, const u8 *data) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct saa7191 *decoder = to_saa7191(sd); |
| int i; |
| int ret; |
| |
| for (i = 0; i < (length - 1); i++) { |
| decoder->reg[data[0] + i] = data[i + 1]; |
| } |
| |
| ret = i2c_master_send(client, data, length); |
| if (ret < 0) { |
| printk(KERN_ERR "SAA7191: saa7191_write_block(): " |
| "write failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* Helper functions */ |
| |
| static int saa7191_s_routing(struct v4l2_subdev *sd, |
| const struct v4l2_routing *route) |
| { |
| struct saa7191 *decoder = to_saa7191(sd); |
| u8 luma = saa7191_read_reg(sd, SAA7191_REG_LUMA); |
| u8 iock = saa7191_read_reg(sd, SAA7191_REG_IOCK); |
| int err; |
| |
| switch (route->input) { |
| case SAA7191_INPUT_COMPOSITE: /* Set Composite input */ |
| iock &= ~(SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW1 |
| | SAA7191_IOCK_GPSW2); |
| /* Chrominance trap active */ |
| luma &= ~SAA7191_LUMA_BYPS; |
| break; |
| case SAA7191_INPUT_SVIDEO: /* Set S-Video input */ |
| iock |= SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW2; |
| /* Chrominance trap bypassed */ |
| luma |= SAA7191_LUMA_BYPS; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| err = saa7191_write_reg(sd, SAA7191_REG_LUMA, luma); |
| if (err) |
| return -EIO; |
| err = saa7191_write_reg(sd, SAA7191_REG_IOCK, iock); |
| if (err) |
| return -EIO; |
| |
| decoder->input = route->input; |
| |
| return 0; |
| } |
| |
| static int saa7191_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) |
| { |
| struct saa7191 *decoder = to_saa7191(sd); |
| u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC); |
| u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3); |
| u8 chcv = saa7191_read_reg(sd, SAA7191_REG_CHCV); |
| int err; |
| |
| if (norm & V4L2_STD_PAL) { |
| stdc &= ~SAA7191_STDC_SECS; |
| ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL); |
| chcv = SAA7191_CHCV_PAL; |
| } else if (norm & V4L2_STD_NTSC) { |
| stdc &= ~SAA7191_STDC_SECS; |
| ctl3 &= ~SAA7191_CTL3_AUFD; |
| ctl3 |= SAA7191_CTL3_FSEL; |
| chcv = SAA7191_CHCV_NTSC; |
| } else if (norm & V4L2_STD_SECAM) { |
| stdc |= SAA7191_STDC_SECS; |
| ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL); |
| chcv = SAA7191_CHCV_PAL; |
| } else { |
| return -EINVAL; |
| } |
| |
| err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3); |
| if (err) |
| return -EIO; |
| err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc); |
| if (err) |
| return -EIO; |
| err = saa7191_write_reg(sd, SAA7191_REG_CHCV, chcv); |
| if (err) |
| return -EIO; |
| |
| decoder->norm = norm; |
| |
| dprintk("ctl3: %02x stdc: %02x chcv: %02x\n", ctl3, |
| stdc, chcv); |
| dprintk("norm: %llx\n", norm); |
| |
| return 0; |
| } |
| |
| static int saa7191_wait_for_signal(struct v4l2_subdev *sd, u8 *status) |
| { |
| int i = 0; |
| |
| dprintk("Checking for signal...\n"); |
| |
| for (i = 0; i < SAA7191_SYNC_COUNT; i++) { |
| if (saa7191_read_status(sd, status)) |
| return -EIO; |
| |
| if (((*status) & SAA7191_STATUS_HLCK) == 0) { |
| dprintk("Signal found\n"); |
| return 0; |
| } |
| |
| msleep(SAA7191_SYNC_DELAY); |
| } |
| |
| dprintk("No signal\n"); |
| |
| return -EBUSY; |
| } |
| |
| static int saa7191_querystd(struct v4l2_subdev *sd, v4l2_std_id *norm) |
| { |
| struct saa7191 *decoder = to_saa7191(sd); |
| u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC); |
| u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3); |
| u8 status; |
| v4l2_std_id old_norm = decoder->norm; |
| int err = 0; |
| |
| dprintk("SAA7191 extended signal auto-detection...\n"); |
| |
| *norm = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM; |
| stdc &= ~SAA7191_STDC_SECS; |
| ctl3 &= ~(SAA7191_CTL3_FSEL); |
| |
| err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc); |
| if (err) { |
| err = -EIO; |
| goto out; |
| } |
| err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3); |
| if (err) { |
| err = -EIO; |
| goto out; |
| } |
| |
| ctl3 |= SAA7191_CTL3_AUFD; |
| err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3); |
| if (err) { |
| err = -EIO; |
| goto out; |
| } |
| |
| msleep(SAA7191_SYNC_DELAY); |
| |
| err = saa7191_wait_for_signal(sd, &status); |
| if (err) |
| goto out; |
| |
| if (status & SAA7191_STATUS_FIDT) { |
| /* 60Hz signal -> NTSC */ |
| dprintk("60Hz signal: NTSC\n"); |
| *norm = V4L2_STD_NTSC; |
| return 0; |
| } |
| |
| /* 50Hz signal */ |
| dprintk("50Hz signal: Trying PAL...\n"); |
| |
| /* try PAL first */ |
| err = saa7191_s_std(sd, V4L2_STD_PAL); |
| if (err) |
| goto out; |
| |
| msleep(SAA7191_SYNC_DELAY); |
| |
| err = saa7191_wait_for_signal(sd, &status); |
| if (err) |
| goto out; |
| |
| /* not 50Hz ? */ |
| if (status & SAA7191_STATUS_FIDT) { |
| dprintk("No 50Hz signal\n"); |
| saa7191_s_std(sd, old_norm); |
| return -EAGAIN; |
| } |
| |
| if (status & SAA7191_STATUS_CODE) { |
| dprintk("PAL\n"); |
| *norm = V4L2_STD_PAL; |
| return saa7191_s_std(sd, old_norm); |
| } |
| |
| dprintk("No color detected with PAL - Trying SECAM...\n"); |
| |
| /* no color detected ? -> try SECAM */ |
| err = saa7191_s_std(sd, V4L2_STD_SECAM); |
| if (err) |
| goto out; |
| |
| msleep(SAA7191_SYNC_DELAY); |
| |
| err = saa7191_wait_for_signal(sd, &status); |
| if (err) |
| goto out; |
| |
| /* not 50Hz ? */ |
| if (status & SAA7191_STATUS_FIDT) { |
| dprintk("No 50Hz signal\n"); |
| err = -EAGAIN; |
| goto out; |
| } |
| |
| if (status & SAA7191_STATUS_CODE) { |
| /* Color detected -> SECAM */ |
| dprintk("SECAM\n"); |
| *norm = V4L2_STD_SECAM; |
| return saa7191_s_std(sd, old_norm); |
| } |
| |
| dprintk("No color detected with SECAM - Going back to PAL.\n"); |
| |
| out: |
| return saa7191_s_std(sd, old_norm); |
| } |
| |
| static int saa7191_autodetect_norm(struct v4l2_subdev *sd) |
| { |
| u8 status; |
| |
| dprintk("SAA7191 signal auto-detection...\n"); |
| |
| dprintk("Reading status...\n"); |
| |
| if (saa7191_read_status(sd, &status)) |
| return -EIO; |
| |
| dprintk("Checking for signal...\n"); |
| |
| /* no signal ? */ |
| if (status & SAA7191_STATUS_HLCK) { |
| dprintk("No signal\n"); |
| return -EBUSY; |
| } |
| |
| dprintk("Signal found\n"); |
| |
| if (status & SAA7191_STATUS_FIDT) { |
| /* 60hz signal -> NTSC */ |
| dprintk("NTSC\n"); |
| return saa7191_s_std(sd, V4L2_STD_NTSC); |
| } else { |
| /* 50hz signal -> PAL */ |
| dprintk("PAL\n"); |
| return saa7191_s_std(sd, V4L2_STD_PAL); |
| } |
| } |
| |
| static int saa7191_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| u8 reg; |
| int ret = 0; |
| |
| switch (ctrl->id) { |
| case SAA7191_CONTROL_BANDPASS: |
| case SAA7191_CONTROL_BANDPASS_WEIGHT: |
| case SAA7191_CONTROL_CORING: |
| reg = saa7191_read_reg(sd, SAA7191_REG_LUMA); |
| switch (ctrl->id) { |
| case SAA7191_CONTROL_BANDPASS: |
| ctrl->value = ((s32)reg & SAA7191_LUMA_BPSS_MASK) |
| >> SAA7191_LUMA_BPSS_SHIFT; |
| break; |
| case SAA7191_CONTROL_BANDPASS_WEIGHT: |
| ctrl->value = ((s32)reg & SAA7191_LUMA_APER_MASK) |
| >> SAA7191_LUMA_APER_SHIFT; |
| break; |
| case SAA7191_CONTROL_CORING: |
| ctrl->value = ((s32)reg & SAA7191_LUMA_CORI_MASK) |
| >> SAA7191_LUMA_CORI_SHIFT; |
| break; |
| } |
| break; |
| case SAA7191_CONTROL_FORCE_COLOUR: |
| case SAA7191_CONTROL_CHROMA_GAIN: |
| reg = saa7191_read_reg(sd, SAA7191_REG_GAIN); |
| if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR) |
| ctrl->value = ((s32)reg & SAA7191_GAIN_COLO) ? 1 : 0; |
| else |
| ctrl->value = ((s32)reg & SAA7191_GAIN_LFIS_MASK) |
| >> SAA7191_GAIN_LFIS_SHIFT; |
| break; |
| case V4L2_CID_HUE: |
| reg = saa7191_read_reg(sd, SAA7191_REG_HUEC); |
| if (reg < 0x80) |
| reg += 0x80; |
| else |
| reg -= 0x80; |
| ctrl->value = (s32)reg; |
| break; |
| case SAA7191_CONTROL_VTRC: |
| reg = saa7191_read_reg(sd, SAA7191_REG_STDC); |
| ctrl->value = ((s32)reg & SAA7191_STDC_VTRC) ? 1 : 0; |
| break; |
| case SAA7191_CONTROL_LUMA_DELAY: |
| reg = saa7191_read_reg(sd, SAA7191_REG_CTL3); |
| ctrl->value = ((s32)reg & SAA7191_CTL3_YDEL_MASK) |
| >> SAA7191_CTL3_YDEL_SHIFT; |
| if (ctrl->value >= 4) |
| ctrl->value -= 8; |
| break; |
| case SAA7191_CONTROL_VNR: |
| reg = saa7191_read_reg(sd, SAA7191_REG_CTL4); |
| ctrl->value = ((s32)reg & SAA7191_CTL4_VNOI_MASK) |
| >> SAA7191_CTL4_VNOI_SHIFT; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int saa7191_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| u8 reg; |
| int ret = 0; |
| |
| switch (ctrl->id) { |
| case SAA7191_CONTROL_BANDPASS: |
| case SAA7191_CONTROL_BANDPASS_WEIGHT: |
| case SAA7191_CONTROL_CORING: |
| reg = saa7191_read_reg(sd, SAA7191_REG_LUMA); |
| switch (ctrl->id) { |
| case SAA7191_CONTROL_BANDPASS: |
| reg &= ~SAA7191_LUMA_BPSS_MASK; |
| reg |= (ctrl->value << SAA7191_LUMA_BPSS_SHIFT) |
| & SAA7191_LUMA_BPSS_MASK; |
| break; |
| case SAA7191_CONTROL_BANDPASS_WEIGHT: |
| reg &= ~SAA7191_LUMA_APER_MASK; |
| reg |= (ctrl->value << SAA7191_LUMA_APER_SHIFT) |
| & SAA7191_LUMA_APER_MASK; |
| break; |
| case SAA7191_CONTROL_CORING: |
| reg &= ~SAA7191_LUMA_CORI_MASK; |
| reg |= (ctrl->value << SAA7191_LUMA_CORI_SHIFT) |
| & SAA7191_LUMA_CORI_MASK; |
| break; |
| } |
| ret = saa7191_write_reg(sd, SAA7191_REG_LUMA, reg); |
| break; |
| case SAA7191_CONTROL_FORCE_COLOUR: |
| case SAA7191_CONTROL_CHROMA_GAIN: |
| reg = saa7191_read_reg(sd, SAA7191_REG_GAIN); |
| if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR) { |
| if (ctrl->value) |
| reg |= SAA7191_GAIN_COLO; |
| else |
| reg &= ~SAA7191_GAIN_COLO; |
| } else { |
| reg &= ~SAA7191_GAIN_LFIS_MASK; |
| reg |= (ctrl->value << SAA7191_GAIN_LFIS_SHIFT) |
| & SAA7191_GAIN_LFIS_MASK; |
| } |
| ret = saa7191_write_reg(sd, SAA7191_REG_GAIN, reg); |
| break; |
| case V4L2_CID_HUE: |
| reg = ctrl->value & 0xff; |
| if (reg < 0x80) |
| reg += 0x80; |
| else |
| reg -= 0x80; |
| ret = saa7191_write_reg(sd, SAA7191_REG_HUEC, reg); |
| break; |
| case SAA7191_CONTROL_VTRC: |
| reg = saa7191_read_reg(sd, SAA7191_REG_STDC); |
| if (ctrl->value) |
| reg |= SAA7191_STDC_VTRC; |
| else |
| reg &= ~SAA7191_STDC_VTRC; |
| ret = saa7191_write_reg(sd, SAA7191_REG_STDC, reg); |
| break; |
| case SAA7191_CONTROL_LUMA_DELAY: { |
| s32 value = ctrl->value; |
| if (value < 0) |
| value += 8; |
| reg = saa7191_read_reg(sd, SAA7191_REG_CTL3); |
| reg &= ~SAA7191_CTL3_YDEL_MASK; |
| reg |= (value << SAA7191_CTL3_YDEL_SHIFT) |
| & SAA7191_CTL3_YDEL_MASK; |
| ret = saa7191_write_reg(sd, SAA7191_REG_CTL3, reg); |
| break; |
| } |
| case SAA7191_CONTROL_VNR: |
| reg = saa7191_read_reg(sd, SAA7191_REG_CTL4); |
| reg &= ~SAA7191_CTL4_VNOI_MASK; |
| reg |= (ctrl->value << SAA7191_CTL4_VNOI_SHIFT) |
| & SAA7191_CTL4_VNOI_MASK; |
| ret = saa7191_write_reg(sd, SAA7191_REG_CTL4, reg); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| /* I2C-interface */ |
| |
| static int saa7191_g_input_status(struct v4l2_subdev *sd, u32 *status) |
| { |
| u8 status_reg; |
| int res = V4L2_IN_ST_NO_SIGNAL; |
| |
| if (saa7191_read_status(sd, &status_reg)) |
| return -EIO; |
| if ((status_reg & SAA7191_STATUS_HLCK) == 0) |
| res = 0; |
| if (!(status_reg & SAA7191_STATUS_CODE)) |
| res |= V4L2_IN_ST_NO_COLOR; |
| *status = res; |
| return 0; |
| } |
| |
| |
| static int saa7191_g_chip_ident(struct v4l2_subdev *sd, |
| struct v4l2_dbg_chip_ident *chip) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7191, 0); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct v4l2_subdev_core_ops saa7191_core_ops = { |
| .g_chip_ident = saa7191_g_chip_ident, |
| .g_ctrl = saa7191_g_ctrl, |
| .s_ctrl = saa7191_s_ctrl, |
| }; |
| |
| static const struct v4l2_subdev_tuner_ops saa7191_tuner_ops = { |
| .s_std = saa7191_s_std, |
| }; |
| |
| static const struct v4l2_subdev_video_ops saa7191_video_ops = { |
| .s_routing = saa7191_s_routing, |
| .querystd = saa7191_querystd, |
| .g_input_status = saa7191_g_input_status, |
| }; |
| |
| static const struct v4l2_subdev_ops saa7191_ops = { |
| .core = &saa7191_core_ops, |
| .video = &saa7191_video_ops, |
| }; |
| |
| static int saa7191_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int err = 0; |
| struct saa7191 *decoder; |
| struct v4l2_subdev *sd; |
| |
| v4l_info(client, "chip found @ 0x%x (%s)\n", |
| client->addr << 1, client->adapter->name); |
| |
| decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); |
| if (!decoder) |
| return -ENOMEM; |
| |
| sd = &decoder->sd; |
| v4l2_i2c_subdev_init(sd, client, &saa7191_ops); |
| |
| err = saa7191_write_block(sd, sizeof(initseq), initseq); |
| if (err) { |
| printk(KERN_ERR "SAA7191 initialization failed\n"); |
| kfree(decoder); |
| return err; |
| } |
| |
| printk(KERN_INFO "SAA7191 initialized\n"); |
| |
| decoder->input = SAA7191_INPUT_COMPOSITE; |
| decoder->norm = V4L2_STD_PAL; |
| |
| err = saa7191_autodetect_norm(sd); |
| if (err && (err != -EBUSY)) |
| printk(KERN_ERR "SAA7191: Signal auto-detection failed\n"); |
| |
| return 0; |
| } |
| |
| static int saa7191_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| |
| v4l2_device_unregister_subdev(sd); |
| kfree(to_saa7191(sd)); |
| return 0; |
| } |
| |
| static const struct i2c_device_id saa7191_id[] = { |
| { "saa7191", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, saa7191_id); |
| |
| static struct v4l2_i2c_driver_data v4l2_i2c_data = { |
| .name = "saa7191", |
| .probe = saa7191_probe, |
| .remove = saa7191_remove, |
| .id_table = saa7191_id, |
| }; |