| /* |
| * Copyright (C) ST-Ericsson SA 2010 |
| * |
| * Author: Jayeeta Banerjee <jayeeta.banerjee@stericsson.com> |
| * Author: Sundar Iyer <sundar.iyer@stericsson.com> |
| * |
| * License Terms: GNU General Public License, version 2 |
| * |
| * TC35893 MFD Keypad Controller driver |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/input.h> |
| #include <linux/platform_device.h> |
| #include <linux/input/matrix_keypad.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/mfd/tc3589x.h> |
| |
| /* Maximum supported keypad matrix row/columns size */ |
| #define TC3589x_MAX_KPROW 8 |
| #define TC3589x_MAX_KPCOL 12 |
| |
| /* keypad related Constants */ |
| #define TC3589x_MAX_DEBOUNCE_SETTLE 0xFF |
| #define DEDICATED_KEY_VAL 0xFF |
| |
| /* Pull up/down masks */ |
| #define TC3589x_NO_PULL_MASK 0x0 |
| #define TC3589x_PULL_DOWN_MASK 0x1 |
| #define TC3589x_PULL_UP_MASK 0x2 |
| #define TC3589x_PULLUP_ALL_MASK 0xAA |
| #define TC3589x_IO_PULL_VAL(index, mask) ((mask)<<((index)%4)*2)) |
| |
| /* Bit masks for IOCFG register */ |
| #define IOCFG_BALLCFG 0x01 |
| #define IOCFG_IG 0x08 |
| |
| #define KP_EVCODE_COL_MASK 0x0F |
| #define KP_EVCODE_ROW_MASK 0x70 |
| #define KP_RELEASE_EVT_MASK 0x80 |
| |
| #define KP_ROW_SHIFT 4 |
| |
| #define KP_NO_VALID_KEY_MASK 0x7F |
| |
| /* bit masks for RESTCTRL register */ |
| #define TC3589x_KBDRST 0x2 |
| #define TC3589x_IRQRST 0x10 |
| #define TC3589x_RESET_ALL 0x1B |
| |
| /* KBDMFS register bit mask */ |
| #define TC3589x_KBDMFS_EN 0x1 |
| |
| /* CLKEN register bitmask */ |
| #define KPD_CLK_EN 0x1 |
| |
| /* RSTINTCLR register bit mask */ |
| #define IRQ_CLEAR 0x1 |
| |
| /* bit masks for keyboard interrupts*/ |
| #define TC3589x_EVT_LOSS_INT 0x8 |
| #define TC3589x_EVT_INT 0x4 |
| #define TC3589x_KBD_LOSS_INT 0x2 |
| #define TC3589x_KBD_INT 0x1 |
| |
| /* bit masks for keyboard interrupt clear*/ |
| #define TC3589x_EVT_INT_CLR 0x2 |
| #define TC3589x_KBD_INT_CLR 0x1 |
| |
| #define TC3589x_KBD_KEYMAP_SIZE 64 |
| |
| /** |
| * struct tc_keypad - data structure used by keypad driver |
| * @input: pointer to input device object |
| * @board: keypad platform device |
| * @krow: number of rows |
| * @kcol: number of coloumns |
| * @keymap: matrix scan code table for keycodes |
| */ |
| struct tc_keypad { |
| struct tc3589x *tc3589x; |
| struct input_dev *input; |
| const struct tc3589x_keypad_platform_data *board; |
| unsigned int krow; |
| unsigned int kcol; |
| unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE]; |
| bool keypad_stopped; |
| }; |
| |
| static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad) |
| { |
| int ret; |
| struct tc3589x *tc3589x = keypad->tc3589x; |
| u8 settle_time = keypad->board->settle_time; |
| u8 dbounce_period = keypad->board->debounce_period; |
| u8 rows = keypad->board->krow & 0xf; /* mask out the nibble */ |
| u8 column = keypad->board->kcol & 0xf; /* mask out the nibble */ |
| |
| /* validate platform configurations */ |
| if (keypad->board->kcol > TC3589x_MAX_KPCOL || |
| keypad->board->krow > TC3589x_MAX_KPROW || |
| keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE || |
| keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE) |
| return -EINVAL; |
| |
| /* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */ |
| ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE, |
| (rows << KP_ROW_SHIFT) | column); |
| if (ret < 0) |
| return ret; |
| |
| /* configure dedicated key config, no dedicated key selected */ |
| ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_LSB, DEDICATED_KEY_VAL); |
| if (ret < 0) |
| return ret; |
| |
| ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_MSB, DEDICATED_KEY_VAL); |
| if (ret < 0) |
| return ret; |
| |
| /* Configure settle time */ |
| ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, settle_time); |
| if (ret < 0) |
| return ret; |
| |
| /* Configure debounce time */ |
| ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, dbounce_period); |
| if (ret < 0) |
| return ret; |
| |
| /* Start of initialise keypad GPIOs */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_IOCFG, 0x0, IOCFG_IG); |
| if (ret < 0) |
| return ret; |
| |
| /* Configure pull-up resistors for all row GPIOs */ |
| ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_LSB, |
| TC3589x_PULLUP_ALL_MASK); |
| if (ret < 0) |
| return ret; |
| |
| ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_MSB, |
| TC3589x_PULLUP_ALL_MASK); |
| if (ret < 0) |
| return ret; |
| |
| /* Configure pull-up resistors for all column GPIOs */ |
| ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_LSB, |
| TC3589x_PULLUP_ALL_MASK); |
| if (ret < 0) |
| return ret; |
| |
| ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_MSB, |
| TC3589x_PULLUP_ALL_MASK); |
| if (ret < 0) |
| return ret; |
| |
| ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG2_LSB, |
| TC3589x_PULLUP_ALL_MASK); |
| |
| return ret; |
| } |
| |
| #define TC35893_DATA_REGS 4 |
| #define TC35893_KEYCODE_FIFO_EMPTY 0x7f |
| #define TC35893_KEYCODE_FIFO_CLEAR 0xff |
| #define TC35893_KEYPAD_ROW_SHIFT 0x3 |
| |
| static irqreturn_t tc3589x_keypad_irq(int irq, void *dev) |
| { |
| struct tc_keypad *keypad = dev; |
| struct tc3589x *tc3589x = keypad->tc3589x; |
| u8 i, row_index, col_index, kbd_code, up; |
| u8 code; |
| |
| for (i = 0; i < TC35893_DATA_REGS * 2; i++) { |
| kbd_code = tc3589x_reg_read(tc3589x, TC3589x_EVTCODE_FIFO); |
| |
| /* loop till fifo is empty and no more keys are pressed */ |
| if (kbd_code == TC35893_KEYCODE_FIFO_EMPTY || |
| kbd_code == TC35893_KEYCODE_FIFO_CLEAR) |
| continue; |
| |
| /* valid key is found */ |
| col_index = kbd_code & KP_EVCODE_COL_MASK; |
| row_index = (kbd_code & KP_EVCODE_ROW_MASK) >> KP_ROW_SHIFT; |
| code = MATRIX_SCAN_CODE(row_index, col_index, |
| TC35893_KEYPAD_ROW_SHIFT); |
| up = kbd_code & KP_RELEASE_EVT_MASK; |
| |
| input_event(keypad->input, EV_MSC, MSC_SCAN, code); |
| input_report_key(keypad->input, keypad->keymap[code], !up); |
| input_sync(keypad->input); |
| } |
| |
| /* clear IRQ */ |
| tc3589x_set_bits(tc3589x, TC3589x_KBDIC, |
| 0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR); |
| /* enable IRQ */ |
| tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, |
| 0x0, TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int tc3589x_keypad_enable(struct tc_keypad *keypad) |
| { |
| struct tc3589x *tc3589x = keypad->tc3589x; |
| int ret; |
| |
| /* pull the keypad module out of reset */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x0); |
| if (ret < 0) |
| return ret; |
| |
| /* configure KBDMFS */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMFS, 0x0, TC3589x_KBDMFS_EN); |
| if (ret < 0) |
| return ret; |
| |
| /* enable the keypad clock */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x0, KPD_CLK_EN); |
| if (ret < 0) |
| return ret; |
| |
| /* clear pending IRQs */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_RSTINTCLR, 0x0, 0x1); |
| if (ret < 0) |
| return ret; |
| |
| /* enable the IRQs */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, 0x0, |
| TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT); |
| if (ret < 0) |
| return ret; |
| |
| keypad->keypad_stopped = false; |
| |
| return ret; |
| } |
| |
| static int tc3589x_keypad_disable(struct tc_keypad *keypad) |
| { |
| struct tc3589x *tc3589x = keypad->tc3589x; |
| int ret; |
| |
| /* clear IRQ */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_KBDIC, |
| 0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR); |
| if (ret < 0) |
| return ret; |
| |
| /* disable all interrupts */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, |
| ~(TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT), 0x0); |
| if (ret < 0) |
| return ret; |
| |
| /* disable the keypad module */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x1, 0x0); |
| if (ret < 0) |
| return ret; |
| |
| /* put the keypad module into reset */ |
| ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x1); |
| |
| keypad->keypad_stopped = true; |
| |
| return ret; |
| } |
| |
| static int tc3589x_keypad_open(struct input_dev *input) |
| { |
| int error; |
| struct tc_keypad *keypad = input_get_drvdata(input); |
| |
| /* enable the keypad module */ |
| error = tc3589x_keypad_enable(keypad); |
| if (error < 0) { |
| dev_err(&input->dev, "failed to enable keypad module\n"); |
| return error; |
| } |
| |
| error = tc3589x_keypad_init_key_hardware(keypad); |
| if (error < 0) { |
| dev_err(&input->dev, "failed to configure keypad module\n"); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static void tc3589x_keypad_close(struct input_dev *input) |
| { |
| struct tc_keypad *keypad = input_get_drvdata(input); |
| |
| /* disable the keypad module */ |
| tc3589x_keypad_disable(keypad); |
| } |
| |
| static int __devinit tc3589x_keypad_probe(struct platform_device *pdev) |
| { |
| struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent); |
| struct tc_keypad *keypad; |
| struct input_dev *input; |
| const struct tc3589x_keypad_platform_data *plat; |
| int error, irq; |
| |
| plat = tc3589x->pdata->keypad; |
| if (!plat) { |
| dev_err(&pdev->dev, "invalid keypad platform data\n"); |
| return -EINVAL; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| keypad = kzalloc(sizeof(struct tc_keypad), GFP_KERNEL); |
| input = input_allocate_device(); |
| if (!keypad || !input) { |
| dev_err(&pdev->dev, "failed to allocate keypad memory\n"); |
| error = -ENOMEM; |
| goto err_free_mem; |
| } |
| |
| keypad->board = plat; |
| keypad->input = input; |
| keypad->tc3589x = tc3589x; |
| |
| input->id.bustype = BUS_I2C; |
| input->name = pdev->name; |
| input->dev.parent = &pdev->dev; |
| |
| input->keycode = keypad->keymap; |
| input->keycodesize = sizeof(keypad->keymap[0]); |
| input->keycodemax = ARRAY_SIZE(keypad->keymap); |
| |
| input->open = tc3589x_keypad_open; |
| input->close = tc3589x_keypad_close; |
| |
| input_set_drvdata(input, keypad); |
| |
| input_set_capability(input, EV_MSC, MSC_SCAN); |
| |
| __set_bit(EV_KEY, input->evbit); |
| if (!plat->no_autorepeat) |
| __set_bit(EV_REP, input->evbit); |
| |
| matrix_keypad_build_keymap(plat->keymap_data, 0x3, |
| input->keycode, input->keybit); |
| |
| error = request_threaded_irq(irq, NULL, |
| tc3589x_keypad_irq, plat->irqtype, |
| "tc3589x-keypad", keypad); |
| if (error < 0) { |
| dev_err(&pdev->dev, |
| "Could not allocate irq %d,error %d\n", |
| irq, error); |
| goto err_free_mem; |
| } |
| |
| error = input_register_device(input); |
| if (error) { |
| dev_err(&pdev->dev, "Could not register input device\n"); |
| goto err_free_irq; |
| } |
| |
| /* let platform decide if keypad is a wakeup source or not */ |
| device_init_wakeup(&pdev->dev, plat->enable_wakeup); |
| device_set_wakeup_capable(&pdev->dev, plat->enable_wakeup); |
| |
| platform_set_drvdata(pdev, keypad); |
| |
| return 0; |
| |
| err_free_irq: |
| free_irq(irq, keypad); |
| err_free_mem: |
| input_free_device(input); |
| kfree(keypad); |
| return error; |
| } |
| |
| static int __devexit tc3589x_keypad_remove(struct platform_device *pdev) |
| { |
| struct tc_keypad *keypad = platform_get_drvdata(pdev); |
| int irq = platform_get_irq(pdev, 0); |
| |
| if (!keypad->keypad_stopped) |
| tc3589x_keypad_disable(keypad); |
| |
| free_irq(irq, keypad); |
| |
| input_unregister_device(keypad->input); |
| |
| kfree(keypad); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int tc3589x_keypad_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct tc_keypad *keypad = platform_get_drvdata(pdev); |
| int irq = platform_get_irq(pdev, 0); |
| |
| /* keypad is already off; we do nothing */ |
| if (keypad->keypad_stopped) |
| return 0; |
| |
| /* if device is not a wakeup source, disable it for powersave */ |
| if (!device_may_wakeup(&pdev->dev)) |
| tc3589x_keypad_disable(keypad); |
| else |
| enable_irq_wake(irq); |
| |
| return 0; |
| } |
| |
| static int tc3589x_keypad_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct tc_keypad *keypad = platform_get_drvdata(pdev); |
| int irq = platform_get_irq(pdev, 0); |
| |
| if (!keypad->keypad_stopped) |
| return 0; |
| |
| /* enable the device to resume normal operations */ |
| if (!device_may_wakeup(&pdev->dev)) |
| tc3589x_keypad_enable(keypad); |
| else |
| disable_irq_wake(irq); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(tc3589x_keypad_dev_pm_ops, |
| tc3589x_keypad_suspend, tc3589x_keypad_resume); |
| |
| static struct platform_driver tc3589x_keypad_driver = { |
| .driver = { |
| .name = "tc3589x-keypad", |
| .owner = THIS_MODULE, |
| .pm = &tc3589x_keypad_dev_pm_ops, |
| }, |
| .probe = tc3589x_keypad_probe, |
| .remove = __devexit_p(tc3589x_keypad_remove), |
| }; |
| module_platform_driver(tc3589x_keypad_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer"); |
| MODULE_DESCRIPTION("TC35893 Keypad Driver"); |
| MODULE_ALIAS("platform:tc3589x-keypad"); |