| /* |
| * Copyright 2019 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #define SWSMU_CODE_LAYER_L2 |
| |
| #include <linux/firmware.h> |
| #include "amdgpu.h" |
| #include "amdgpu_smu.h" |
| #include "atomfirmware.h" |
| #include "amdgpu_atomfirmware.h" |
| #include "amdgpu_atombios.h" |
| #include "smu_v11_0.h" |
| #include "smu11_driver_if_arcturus.h" |
| #include "soc15_common.h" |
| #include "atom.h" |
| #include "power_state.h" |
| #include "arcturus_ppt.h" |
| #include "smu_v11_0_pptable.h" |
| #include "arcturus_ppsmc.h" |
| #include "nbio/nbio_7_4_offset.h" |
| #include "nbio/nbio_7_4_sh_mask.h" |
| #include "thm/thm_11_0_2_offset.h" |
| #include "thm/thm_11_0_2_sh_mask.h" |
| #include "amdgpu_xgmi.h" |
| #include <linux/i2c.h> |
| #include <linux/pci.h> |
| #include "amdgpu_ras.h" |
| #include "smu_cmn.h" |
| |
| /* |
| * DO NOT use these for err/warn/info/debug messages. |
| * Use dev_err, dev_warn, dev_info and dev_dbg instead. |
| * They are more MGPU friendly. |
| */ |
| #undef pr_err |
| #undef pr_warn |
| #undef pr_info |
| #undef pr_debug |
| |
| #define to_amdgpu_device(x) (container_of(x, struct amdgpu_device, pm.smu_i2c)) |
| |
| #define ARCTURUS_FEA_MAP(smu_feature, arcturus_feature) \ |
| [smu_feature] = {1, (arcturus_feature)} |
| |
| #define SMU_FEATURES_LOW_MASK 0x00000000FFFFFFFF |
| #define SMU_FEATURES_LOW_SHIFT 0 |
| #define SMU_FEATURES_HIGH_MASK 0xFFFFFFFF00000000 |
| #define SMU_FEATURES_HIGH_SHIFT 32 |
| |
| #define SMC_DPM_FEATURE ( \ |
| FEATURE_DPM_PREFETCHER_MASK | \ |
| FEATURE_DPM_GFXCLK_MASK | \ |
| FEATURE_DPM_UCLK_MASK | \ |
| FEATURE_DPM_SOCCLK_MASK | \ |
| FEATURE_DPM_MP0CLK_MASK | \ |
| FEATURE_DPM_FCLK_MASK | \ |
| FEATURE_DPM_XGMI_MASK) |
| |
| /* possible frequency drift (1Mhz) */ |
| #define EPSILON 1 |
| |
| #define smnPCIE_ESM_CTRL 0x111003D0 |
| |
| static const struct cmn2asic_msg_mapping arcturus_message_map[SMU_MSG_MAX_COUNT] = { |
| MSG_MAP(TestMessage, PPSMC_MSG_TestMessage, 0), |
| MSG_MAP(GetSmuVersion, PPSMC_MSG_GetSmuVersion, 1), |
| MSG_MAP(GetDriverIfVersion, PPSMC_MSG_GetDriverIfVersion, 1), |
| MSG_MAP(SetAllowedFeaturesMaskLow, PPSMC_MSG_SetAllowedFeaturesMaskLow, 0), |
| MSG_MAP(SetAllowedFeaturesMaskHigh, PPSMC_MSG_SetAllowedFeaturesMaskHigh, 0), |
| MSG_MAP(EnableAllSmuFeatures, PPSMC_MSG_EnableAllSmuFeatures, 0), |
| MSG_MAP(DisableAllSmuFeatures, PPSMC_MSG_DisableAllSmuFeatures, 0), |
| MSG_MAP(EnableSmuFeaturesLow, PPSMC_MSG_EnableSmuFeaturesLow, 1), |
| MSG_MAP(EnableSmuFeaturesHigh, PPSMC_MSG_EnableSmuFeaturesHigh, 1), |
| MSG_MAP(DisableSmuFeaturesLow, PPSMC_MSG_DisableSmuFeaturesLow, 0), |
| MSG_MAP(DisableSmuFeaturesHigh, PPSMC_MSG_DisableSmuFeaturesHigh, 0), |
| MSG_MAP(GetEnabledSmuFeaturesLow, PPSMC_MSG_GetEnabledSmuFeaturesLow, 0), |
| MSG_MAP(GetEnabledSmuFeaturesHigh, PPSMC_MSG_GetEnabledSmuFeaturesHigh, 0), |
| MSG_MAP(SetDriverDramAddrHigh, PPSMC_MSG_SetDriverDramAddrHigh, 1), |
| MSG_MAP(SetDriverDramAddrLow, PPSMC_MSG_SetDriverDramAddrLow, 1), |
| MSG_MAP(SetToolsDramAddrHigh, PPSMC_MSG_SetToolsDramAddrHigh, 0), |
| MSG_MAP(SetToolsDramAddrLow, PPSMC_MSG_SetToolsDramAddrLow, 0), |
| MSG_MAP(TransferTableSmu2Dram, PPSMC_MSG_TransferTableSmu2Dram, 1), |
| MSG_MAP(TransferTableDram2Smu, PPSMC_MSG_TransferTableDram2Smu, 0), |
| MSG_MAP(UseDefaultPPTable, PPSMC_MSG_UseDefaultPPTable, 0), |
| MSG_MAP(UseBackupPPTable, PPSMC_MSG_UseBackupPPTable, 0), |
| MSG_MAP(SetSystemVirtualDramAddrHigh, PPSMC_MSG_SetSystemVirtualDramAddrHigh, 0), |
| MSG_MAP(SetSystemVirtualDramAddrLow, PPSMC_MSG_SetSystemVirtualDramAddrLow, 0), |
| MSG_MAP(EnterBaco, PPSMC_MSG_EnterBaco, 0), |
| MSG_MAP(ExitBaco, PPSMC_MSG_ExitBaco, 0), |
| MSG_MAP(ArmD3, PPSMC_MSG_ArmD3, 0), |
| MSG_MAP(SetSoftMinByFreq, PPSMC_MSG_SetSoftMinByFreq, 0), |
| MSG_MAP(SetSoftMaxByFreq, PPSMC_MSG_SetSoftMaxByFreq, 0), |
| MSG_MAP(SetHardMinByFreq, PPSMC_MSG_SetHardMinByFreq, 0), |
| MSG_MAP(SetHardMaxByFreq, PPSMC_MSG_SetHardMaxByFreq, 0), |
| MSG_MAP(GetMinDpmFreq, PPSMC_MSG_GetMinDpmFreq, 0), |
| MSG_MAP(GetMaxDpmFreq, PPSMC_MSG_GetMaxDpmFreq, 0), |
| MSG_MAP(GetDpmFreqByIndex, PPSMC_MSG_GetDpmFreqByIndex, 1), |
| MSG_MAP(SetWorkloadMask, PPSMC_MSG_SetWorkloadMask, 1), |
| MSG_MAP(SetDfSwitchType, PPSMC_MSG_SetDfSwitchType, 0), |
| MSG_MAP(GetVoltageByDpm, PPSMC_MSG_GetVoltageByDpm, 0), |
| MSG_MAP(GetVoltageByDpmOverdrive, PPSMC_MSG_GetVoltageByDpmOverdrive, 0), |
| MSG_MAP(SetPptLimit, PPSMC_MSG_SetPptLimit, 0), |
| MSG_MAP(GetPptLimit, PPSMC_MSG_GetPptLimit, 1), |
| MSG_MAP(PowerUpVcn0, PPSMC_MSG_PowerUpVcn0, 0), |
| MSG_MAP(PowerDownVcn0, PPSMC_MSG_PowerDownVcn0, 0), |
| MSG_MAP(PowerUpVcn1, PPSMC_MSG_PowerUpVcn1, 0), |
| MSG_MAP(PowerDownVcn1, PPSMC_MSG_PowerDownVcn1, 0), |
| MSG_MAP(PrepareMp1ForUnload, PPSMC_MSG_PrepareMp1ForUnload, 0), |
| MSG_MAP(PrepareMp1ForReset, PPSMC_MSG_PrepareMp1ForReset, 0), |
| MSG_MAP(PrepareMp1ForShutdown, PPSMC_MSG_PrepareMp1ForShutdown, 0), |
| MSG_MAP(SoftReset, PPSMC_MSG_SoftReset, 0), |
| MSG_MAP(RunAfllBtc, PPSMC_MSG_RunAfllBtc, 0), |
| MSG_MAP(RunDcBtc, PPSMC_MSG_RunDcBtc, 0), |
| MSG_MAP(DramLogSetDramAddrHigh, PPSMC_MSG_DramLogSetDramAddrHigh, 0), |
| MSG_MAP(DramLogSetDramAddrLow, PPSMC_MSG_DramLogSetDramAddrLow, 0), |
| MSG_MAP(DramLogSetDramSize, PPSMC_MSG_DramLogSetDramSize, 0), |
| MSG_MAP(GetDebugData, PPSMC_MSG_GetDebugData, 0), |
| MSG_MAP(WaflTest, PPSMC_MSG_WaflTest, 0), |
| MSG_MAP(SetXgmiMode, PPSMC_MSG_SetXgmiMode, 0), |
| MSG_MAP(SetMemoryChannelEnable, PPSMC_MSG_SetMemoryChannelEnable, 0), |
| MSG_MAP(DFCstateControl, PPSMC_MSG_DFCstateControl, 0), |
| MSG_MAP(GmiPwrDnControl, PPSMC_MSG_GmiPwrDnControl, 0), |
| MSG_MAP(ReadSerialNumTop32, PPSMC_MSG_ReadSerialNumTop32, 1), |
| MSG_MAP(ReadSerialNumBottom32, PPSMC_MSG_ReadSerialNumBottom32, 1), |
| }; |
| |
| static const struct cmn2asic_mapping arcturus_clk_map[SMU_CLK_COUNT] = { |
| CLK_MAP(GFXCLK, PPCLK_GFXCLK), |
| CLK_MAP(SCLK, PPCLK_GFXCLK), |
| CLK_MAP(SOCCLK, PPCLK_SOCCLK), |
| CLK_MAP(FCLK, PPCLK_FCLK), |
| CLK_MAP(UCLK, PPCLK_UCLK), |
| CLK_MAP(MCLK, PPCLK_UCLK), |
| CLK_MAP(DCLK, PPCLK_DCLK), |
| CLK_MAP(VCLK, PPCLK_VCLK), |
| }; |
| |
| static const struct cmn2asic_mapping arcturus_feature_mask_map[SMU_FEATURE_COUNT] = { |
| FEA_MAP(DPM_PREFETCHER), |
| FEA_MAP(DPM_GFXCLK), |
| FEA_MAP(DPM_UCLK), |
| FEA_MAP(DPM_SOCCLK), |
| FEA_MAP(DPM_FCLK), |
| FEA_MAP(DPM_MP0CLK), |
| ARCTURUS_FEA_MAP(SMU_FEATURE_XGMI_BIT, FEATURE_DPM_XGMI_BIT), |
| FEA_MAP(DS_GFXCLK), |
| FEA_MAP(DS_SOCCLK), |
| FEA_MAP(DS_LCLK), |
| FEA_MAP(DS_FCLK), |
| FEA_MAP(DS_UCLK), |
| FEA_MAP(GFX_ULV), |
| ARCTURUS_FEA_MAP(SMU_FEATURE_VCN_PG_BIT, FEATURE_DPM_VCN_BIT), |
| FEA_MAP(RSMU_SMN_CG), |
| FEA_MAP(WAFL_CG), |
| FEA_MAP(PPT), |
| FEA_MAP(TDC), |
| FEA_MAP(APCC_PLUS), |
| FEA_MAP(VR0HOT), |
| FEA_MAP(VR1HOT), |
| FEA_MAP(FW_CTF), |
| FEA_MAP(FAN_CONTROL), |
| FEA_MAP(THERMAL), |
| FEA_MAP(OUT_OF_BAND_MONITOR), |
| FEA_MAP(TEMP_DEPENDENT_VMIN), |
| }; |
| |
| static const struct cmn2asic_mapping arcturus_table_map[SMU_TABLE_COUNT] = { |
| TAB_MAP(PPTABLE), |
| TAB_MAP(AVFS), |
| TAB_MAP(AVFS_PSM_DEBUG), |
| TAB_MAP(AVFS_FUSE_OVERRIDE), |
| TAB_MAP(PMSTATUSLOG), |
| TAB_MAP(SMU_METRICS), |
| TAB_MAP(DRIVER_SMU_CONFIG), |
| TAB_MAP(OVERDRIVE), |
| TAB_MAP(I2C_COMMANDS), |
| TAB_MAP(ACTIVITY_MONITOR_COEFF), |
| }; |
| |
| static const struct cmn2asic_mapping arcturus_pwr_src_map[SMU_POWER_SOURCE_COUNT] = { |
| PWR_MAP(AC), |
| PWR_MAP(DC), |
| }; |
| |
| static const struct cmn2asic_mapping arcturus_workload_map[PP_SMC_POWER_PROFILE_COUNT] = { |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT, WORKLOAD_PPLIB_DEFAULT_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_POWERSAVING, WORKLOAD_PPLIB_POWER_SAVING_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_VIDEO, WORKLOAD_PPLIB_VIDEO_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_COMPUTE, WORKLOAD_PPLIB_COMPUTE_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_CUSTOM, WORKLOAD_PPLIB_CUSTOM_BIT), |
| }; |
| |
| static int arcturus_tables_init(struct smu_context *smu) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *tables = smu_table->tables; |
| |
| SMU_TABLE_INIT(tables, SMU_TABLE_PPTABLE, sizeof(PPTable_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| |
| SMU_TABLE_INIT(tables, SMU_TABLE_PMSTATUSLOG, SMU11_TOOL_SIZE, |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| |
| SMU_TABLE_INIT(tables, SMU_TABLE_SMU_METRICS, sizeof(SmuMetrics_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| |
| SMU_TABLE_INIT(tables, SMU_TABLE_I2C_COMMANDS, sizeof(SwI2cRequest_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| |
| SMU_TABLE_INIT(tables, SMU_TABLE_ACTIVITY_MONITOR_COEFF, |
| sizeof(DpmActivityMonitorCoeffInt_t), PAGE_SIZE, |
| AMDGPU_GEM_DOMAIN_VRAM); |
| |
| smu_table->metrics_table = kzalloc(sizeof(SmuMetrics_t), GFP_KERNEL); |
| if (!smu_table->metrics_table) |
| return -ENOMEM; |
| smu_table->metrics_time = 0; |
| |
| smu_table->gpu_metrics_table_size = sizeof(struct gpu_metrics_v1_0); |
| smu_table->gpu_metrics_table = kzalloc(smu_table->gpu_metrics_table_size, GFP_KERNEL); |
| if (!smu_table->gpu_metrics_table) { |
| kfree(smu_table->metrics_table); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static int arcturus_allocate_dpm_context(struct smu_context *smu) |
| { |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| |
| smu_dpm->dpm_context = kzalloc(sizeof(struct smu_11_0_dpm_context), |
| GFP_KERNEL); |
| if (!smu_dpm->dpm_context) |
| return -ENOMEM; |
| smu_dpm->dpm_context_size = sizeof(struct smu_11_0_dpm_context); |
| |
| smu_dpm->dpm_current_power_state = kzalloc(sizeof(struct smu_power_state), |
| GFP_KERNEL); |
| if (!smu_dpm->dpm_current_power_state) |
| return -ENOMEM; |
| |
| smu_dpm->dpm_request_power_state = kzalloc(sizeof(struct smu_power_state), |
| GFP_KERNEL); |
| if (!smu_dpm->dpm_request_power_state) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int arcturus_init_smc_tables(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| ret = arcturus_tables_init(smu); |
| if (ret) |
| return ret; |
| |
| ret = arcturus_allocate_dpm_context(smu); |
| if (ret) |
| return ret; |
| |
| return smu_v11_0_init_smc_tables(smu); |
| } |
| |
| static int |
| arcturus_get_allowed_feature_mask(struct smu_context *smu, |
| uint32_t *feature_mask, uint32_t num) |
| { |
| if (num > 2) |
| return -EINVAL; |
| |
| /* pptable will handle the features to enable */ |
| memset(feature_mask, 0xFF, sizeof(uint32_t) * num); |
| |
| return 0; |
| } |
| |
| static int arcturus_set_default_dpm_table(struct smu_context *smu) |
| { |
| struct smu_11_0_dpm_context *dpm_context = smu->smu_dpm.dpm_context; |
| PPTable_t *driver_ppt = smu->smu_table.driver_pptable; |
| struct smu_11_0_dpm_table *dpm_table = NULL; |
| int ret = 0; |
| |
| /* socclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.soc_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_SOCCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_SOCCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_SOCCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.socclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* gfxclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.gfx_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_GFXCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_GFXCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_GFXCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.gfxclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* memclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.uclk_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_UCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_UCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.uclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* fclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.fclk_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_FCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_FCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_FCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.fclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| return 0; |
| } |
| |
| static int arcturus_check_powerplay_table(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| struct smu_baco_context *smu_baco = &smu->smu_baco; |
| |
| if (powerplay_table->platform_caps & SMU_11_0_PP_PLATFORM_CAP_BACO || |
| powerplay_table->platform_caps & SMU_11_0_PP_PLATFORM_CAP_MACO) |
| smu_baco->platform_support = true; |
| |
| table_context->thermal_controller_type = |
| powerplay_table->thermal_controller_type; |
| |
| return 0; |
| } |
| |
| static int arcturus_store_powerplay_table(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| |
| memcpy(table_context->driver_pptable, &powerplay_table->smc_pptable, |
| sizeof(PPTable_t)); |
| |
| return 0; |
| } |
| |
| static int arcturus_append_powerplay_table(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *smc_pptable = table_context->driver_pptable; |
| struct atom_smc_dpm_info_v4_6 *smc_dpm_table; |
| int index, ret; |
| |
| index = get_index_into_master_table(atom_master_list_of_data_tables_v2_1, |
| smc_dpm_info); |
| |
| ret = amdgpu_atombios_get_data_table(smu->adev, index, NULL, NULL, NULL, |
| (uint8_t **)&smc_dpm_table); |
| if (ret) |
| return ret; |
| |
| dev_info(smu->adev->dev, "smc_dpm_info table revision(format.content): %d.%d\n", |
| smc_dpm_table->table_header.format_revision, |
| smc_dpm_table->table_header.content_revision); |
| |
| if ((smc_dpm_table->table_header.format_revision == 4) && |
| (smc_dpm_table->table_header.content_revision == 6)) |
| memcpy(&smc_pptable->MaxVoltageStepGfx, |
| &smc_dpm_table->maxvoltagestepgfx, |
| sizeof(*smc_dpm_table) - offsetof(struct atom_smc_dpm_info_v4_6, maxvoltagestepgfx)); |
| |
| return 0; |
| } |
| |
| static int arcturus_setup_pptable(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| ret = smu_v11_0_setup_pptable(smu); |
| if (ret) |
| return ret; |
| |
| ret = arcturus_store_powerplay_table(smu); |
| if (ret) |
| return ret; |
| |
| ret = arcturus_append_powerplay_table(smu); |
| if (ret) |
| return ret; |
| |
| ret = arcturus_check_powerplay_table(smu); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| static int arcturus_run_btc(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| ret = smu_cmn_send_smc_msg(smu, SMU_MSG_RunAfllBtc, NULL); |
| if (ret) { |
| dev_err(smu->adev->dev, "RunAfllBtc failed!\n"); |
| return ret; |
| } |
| |
| return smu_cmn_send_smc_msg(smu, SMU_MSG_RunDcBtc, NULL); |
| } |
| |
| static int arcturus_populate_umd_state_clk(struct smu_context *smu) |
| { |
| struct smu_11_0_dpm_context *dpm_context = |
| smu->smu_dpm.dpm_context; |
| struct smu_11_0_dpm_table *gfx_table = |
| &dpm_context->dpm_tables.gfx_table; |
| struct smu_11_0_dpm_table *mem_table = |
| &dpm_context->dpm_tables.uclk_table; |
| struct smu_11_0_dpm_table *soc_table = |
| &dpm_context->dpm_tables.soc_table; |
| struct smu_umd_pstate_table *pstate_table = |
| &smu->pstate_table; |
| |
| pstate_table->gfxclk_pstate.min = gfx_table->min; |
| pstate_table->gfxclk_pstate.peak = gfx_table->max; |
| |
| pstate_table->uclk_pstate.min = mem_table->min; |
| pstate_table->uclk_pstate.peak = mem_table->max; |
| |
| pstate_table->socclk_pstate.min = soc_table->min; |
| pstate_table->socclk_pstate.peak = soc_table->max; |
| |
| if (gfx_table->count > ARCTURUS_UMD_PSTATE_GFXCLK_LEVEL && |
| mem_table->count > ARCTURUS_UMD_PSTATE_MCLK_LEVEL && |
| soc_table->count > ARCTURUS_UMD_PSTATE_SOCCLK_LEVEL) { |
| pstate_table->gfxclk_pstate.standard = |
| gfx_table->dpm_levels[ARCTURUS_UMD_PSTATE_GFXCLK_LEVEL].value; |
| pstate_table->uclk_pstate.standard = |
| mem_table->dpm_levels[ARCTURUS_UMD_PSTATE_MCLK_LEVEL].value; |
| pstate_table->socclk_pstate.standard = |
| soc_table->dpm_levels[ARCTURUS_UMD_PSTATE_SOCCLK_LEVEL].value; |
| } else { |
| pstate_table->gfxclk_pstate.standard = |
| pstate_table->gfxclk_pstate.min; |
| pstate_table->uclk_pstate.standard = |
| pstate_table->uclk_pstate.min; |
| pstate_table->socclk_pstate.standard = |
| pstate_table->socclk_pstate.min; |
| } |
| |
| return 0; |
| } |
| |
| static int arcturus_get_clk_table(struct smu_context *smu, |
| struct pp_clock_levels_with_latency *clocks, |
| struct smu_11_0_dpm_table *dpm_table) |
| { |
| int i, count; |
| |
| count = (dpm_table->count > MAX_NUM_CLOCKS) ? MAX_NUM_CLOCKS : dpm_table->count; |
| clocks->num_levels = count; |
| |
| for (i = 0; i < count; i++) { |
| clocks->data[i].clocks_in_khz = |
| dpm_table->dpm_levels[i].value * 1000; |
| clocks->data[i].latency_in_us = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int arcturus_freqs_in_same_level(int32_t frequency1, |
| int32_t frequency2) |
| { |
| return (abs(frequency1 - frequency2) <= EPSILON); |
| } |
| |
| static int arcturus_get_smu_metrics_data(struct smu_context *smu, |
| MetricsMember_t member, |
| uint32_t *value) |
| { |
| struct smu_table_context *smu_table= &smu->smu_table; |
| SmuMetrics_t *metrics = (SmuMetrics_t *)smu_table->metrics_table; |
| int ret = 0; |
| |
| mutex_lock(&smu->metrics_lock); |
| |
| ret = smu_cmn_get_metrics_table_locked(smu, |
| NULL, |
| false); |
| if (ret) { |
| mutex_unlock(&smu->metrics_lock); |
| return ret; |
| } |
| |
| switch (member) { |
| case METRICS_CURR_GFXCLK: |
| *value = metrics->CurrClock[PPCLK_GFXCLK]; |
| break; |
| case METRICS_CURR_SOCCLK: |
| *value = metrics->CurrClock[PPCLK_SOCCLK]; |
| break; |
| case METRICS_CURR_UCLK: |
| *value = metrics->CurrClock[PPCLK_UCLK]; |
| break; |
| case METRICS_CURR_VCLK: |
| *value = metrics->CurrClock[PPCLK_VCLK]; |
| break; |
| case METRICS_CURR_DCLK: |
| *value = metrics->CurrClock[PPCLK_DCLK]; |
| break; |
| case METRICS_CURR_FCLK: |
| *value = metrics->CurrClock[PPCLK_FCLK]; |
| break; |
| case METRICS_AVERAGE_GFXCLK: |
| *value = metrics->AverageGfxclkFrequency; |
| break; |
| case METRICS_AVERAGE_SOCCLK: |
| *value = metrics->AverageSocclkFrequency; |
| break; |
| case METRICS_AVERAGE_UCLK: |
| *value = metrics->AverageUclkFrequency; |
| break; |
| case METRICS_AVERAGE_VCLK: |
| *value = metrics->AverageVclkFrequency; |
| break; |
| case METRICS_AVERAGE_DCLK: |
| *value = metrics->AverageDclkFrequency; |
| break; |
| case METRICS_AVERAGE_GFXACTIVITY: |
| *value = metrics->AverageGfxActivity; |
| break; |
| case METRICS_AVERAGE_MEMACTIVITY: |
| *value = metrics->AverageUclkActivity; |
| break; |
| case METRICS_AVERAGE_VCNACTIVITY: |
| *value = metrics->VcnActivityPercentage; |
| break; |
| case METRICS_AVERAGE_SOCKETPOWER: |
| *value = metrics->AverageSocketPower << 8; |
| break; |
| case METRICS_TEMPERATURE_EDGE: |
| *value = metrics->TemperatureEdge * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_HOTSPOT: |
| *value = metrics->TemperatureHotspot * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_MEM: |
| *value = metrics->TemperatureHBM * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRGFX: |
| *value = metrics->TemperatureVrGfx * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRSOC: |
| *value = metrics->TemperatureVrSoc * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRMEM: |
| *value = metrics->TemperatureVrMem * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_THROTTLER_STATUS: |
| *value = metrics->ThrottlerStatus; |
| break; |
| case METRICS_CURR_FANSPEED: |
| *value = metrics->CurrFanSpeed; |
| break; |
| default: |
| *value = UINT_MAX; |
| break; |
| } |
| |
| mutex_unlock(&smu->metrics_lock); |
| |
| return ret; |
| } |
| |
| static int arcturus_get_current_clk_freq_by_table(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| uint32_t *value) |
| { |
| MetricsMember_t member_type; |
| int clk_id = 0; |
| |
| if (!value) |
| return -EINVAL; |
| |
| clk_id = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_CLK, |
| clk_type); |
| if (clk_id < 0) |
| return -EINVAL; |
| |
| switch (clk_id) { |
| case PPCLK_GFXCLK: |
| /* |
| * CurrClock[clk_id] can provide accurate |
| * output only when the dpm feature is enabled. |
| * We can use Average_* for dpm disabled case. |
| * But this is available for gfxclk/uclk/socclk/vclk/dclk. |
| */ |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_GFXCLK_BIT)) |
| member_type = METRICS_CURR_GFXCLK; |
| else |
| member_type = METRICS_AVERAGE_GFXCLK; |
| break; |
| case PPCLK_UCLK: |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) |
| member_type = METRICS_CURR_UCLK; |
| else |
| member_type = METRICS_AVERAGE_UCLK; |
| break; |
| case PPCLK_SOCCLK: |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_SOCCLK_BIT)) |
| member_type = METRICS_CURR_SOCCLK; |
| else |
| member_type = METRICS_AVERAGE_SOCCLK; |
| break; |
| case PPCLK_VCLK: |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) |
| member_type = METRICS_CURR_VCLK; |
| else |
| member_type = METRICS_AVERAGE_VCLK; |
| break; |
| case PPCLK_DCLK: |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) |
| member_type = METRICS_CURR_DCLK; |
| else |
| member_type = METRICS_AVERAGE_DCLK; |
| break; |
| case PPCLK_FCLK: |
| member_type = METRICS_CURR_FCLK; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return arcturus_get_smu_metrics_data(smu, |
| member_type, |
| value); |
| } |
| |
| static int arcturus_print_clk_levels(struct smu_context *smu, |
| enum smu_clk_type type, char *buf) |
| { |
| int i, now, size = 0; |
| int ret = 0; |
| struct pp_clock_levels_with_latency clocks; |
| struct smu_11_0_dpm_table *single_dpm_table; |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| struct smu_11_0_dpm_context *dpm_context = NULL; |
| |
| if (amdgpu_ras_intr_triggered()) |
| return snprintf(buf, PAGE_SIZE, "unavailable\n"); |
| |
| dpm_context = smu_dpm->dpm_context; |
| |
| switch (type) { |
| case SMU_SCLK: |
| ret = arcturus_get_current_clk_freq_by_table(smu, SMU_GFXCLK, &now); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to get current gfx clk Failed!"); |
| return ret; |
| } |
| |
| single_dpm_table = &(dpm_context->dpm_tables.gfx_table); |
| ret = arcturus_get_clk_table(smu, &clocks, single_dpm_table); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to get gfx clk levels Failed!"); |
| return ret; |
| } |
| |
| /* |
| * For DPM disabled case, there will be only one clock level. |
| * And it's safe to assume that is always the current clock. |
| */ |
| for (i = 0; i < clocks.num_levels; i++) |
| size += sprintf(buf + size, "%d: %uMhz %s\n", i, |
| clocks.data[i].clocks_in_khz / 1000, |
| (clocks.num_levels == 1) ? "*" : |
| (arcturus_freqs_in_same_level( |
| clocks.data[i].clocks_in_khz / 1000, |
| now) ? "*" : "")); |
| break; |
| |
| case SMU_MCLK: |
| ret = arcturus_get_current_clk_freq_by_table(smu, SMU_UCLK, &now); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to get current mclk Failed!"); |
| return ret; |
| } |
| |
| single_dpm_table = &(dpm_context->dpm_tables.uclk_table); |
| ret = arcturus_get_clk_table(smu, &clocks, single_dpm_table); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to get memory clk levels Failed!"); |
| return ret; |
| } |
| |
| for (i = 0; i < clocks.num_levels; i++) |
| size += sprintf(buf + size, "%d: %uMhz %s\n", |
| i, clocks.data[i].clocks_in_khz / 1000, |
| (clocks.num_levels == 1) ? "*" : |
| (arcturus_freqs_in_same_level( |
| clocks.data[i].clocks_in_khz / 1000, |
| now) ? "*" : "")); |
| break; |
| |
| case SMU_SOCCLK: |
| ret = arcturus_get_current_clk_freq_by_table(smu, SMU_SOCCLK, &now); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to get current socclk Failed!"); |
| return ret; |
| } |
| |
| single_dpm_table = &(dpm_context->dpm_tables.soc_table); |
| ret = arcturus_get_clk_table(smu, &clocks, single_dpm_table); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to get socclk levels Failed!"); |
| return ret; |
| } |
| |
| for (i = 0; i < clocks.num_levels; i++) |
| size += sprintf(buf + size, "%d: %uMhz %s\n", |
| i, clocks.data[i].clocks_in_khz / 1000, |
| (clocks.num_levels == 1) ? "*" : |
| (arcturus_freqs_in_same_level( |
| clocks.data[i].clocks_in_khz / 1000, |
| now) ? "*" : "")); |
| break; |
| |
| case SMU_FCLK: |
| ret = arcturus_get_current_clk_freq_by_table(smu, SMU_FCLK, &now); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to get current fclk Failed!"); |
| return ret; |
| } |
| |
| single_dpm_table = &(dpm_context->dpm_tables.fclk_table); |
| ret = arcturus_get_clk_table(smu, &clocks, single_dpm_table); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to get fclk levels Failed!"); |
| return ret; |
| } |
| |
| for (i = 0; i < single_dpm_table->count; i++) |
| size += sprintf(buf + size, "%d: %uMhz %s\n", |
| i, single_dpm_table->dpm_levels[i].value, |
| (clocks.num_levels == 1) ? "*" : |
| (arcturus_freqs_in_same_level( |
| clocks.data[i].clocks_in_khz / 1000, |
| now) ? "*" : "")); |
| break; |
| |
| default: |
| break; |
| } |
| |
| return size; |
| } |
| |
| static int arcturus_upload_dpm_level(struct smu_context *smu, |
| bool max, |
| uint32_t feature_mask, |
| uint32_t level) |
| { |
| struct smu_11_0_dpm_context *dpm_context = |
| smu->smu_dpm.dpm_context; |
| uint32_t freq; |
| int ret = 0; |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_GFXCLK_BIT) && |
| (feature_mask & FEATURE_DPM_GFXCLK_MASK)) { |
| freq = dpm_context->dpm_tables.gfx_table.dpm_levels[level].value; |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| (max ? SMU_MSG_SetSoftMaxByFreq : SMU_MSG_SetSoftMinByFreq), |
| (PPCLK_GFXCLK << 16) | (freq & 0xffff), |
| NULL); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to set soft %s gfxclk !\n", |
| max ? "max" : "min"); |
| return ret; |
| } |
| } |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT) && |
| (feature_mask & FEATURE_DPM_UCLK_MASK)) { |
| freq = dpm_context->dpm_tables.uclk_table.dpm_levels[level].value; |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| (max ? SMU_MSG_SetSoftMaxByFreq : SMU_MSG_SetSoftMinByFreq), |
| (PPCLK_UCLK << 16) | (freq & 0xffff), |
| NULL); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to set soft %s memclk !\n", |
| max ? "max" : "min"); |
| return ret; |
| } |
| } |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_SOCCLK_BIT) && |
| (feature_mask & FEATURE_DPM_SOCCLK_MASK)) { |
| freq = dpm_context->dpm_tables.soc_table.dpm_levels[level].value; |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| (max ? SMU_MSG_SetSoftMaxByFreq : SMU_MSG_SetSoftMinByFreq), |
| (PPCLK_SOCCLK << 16) | (freq & 0xffff), |
| NULL); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to set soft %s socclk !\n", |
| max ? "max" : "min"); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int arcturus_force_clk_levels(struct smu_context *smu, |
| enum smu_clk_type type, uint32_t mask) |
| { |
| struct smu_11_0_dpm_context *dpm_context = smu->smu_dpm.dpm_context; |
| struct smu_11_0_dpm_table *single_dpm_table = NULL; |
| uint32_t soft_min_level, soft_max_level; |
| uint32_t smu_version; |
| int ret = 0; |
| |
| ret = smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to get smu version!\n"); |
| return ret; |
| } |
| |
| if ((smu_version >= 0x361200) && |
| (smu_version <= 0x361a00)) { |
| dev_err(smu->adev->dev, "Forcing clock level is not supported with " |
| "54.18 - 54.26(included) SMU firmwares\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| soft_min_level = mask ? (ffs(mask) - 1) : 0; |
| soft_max_level = mask ? (fls(mask) - 1) : 0; |
| |
| switch (type) { |
| case SMU_SCLK: |
| single_dpm_table = &(dpm_context->dpm_tables.gfx_table); |
| if (soft_max_level >= single_dpm_table->count) { |
| dev_err(smu->adev->dev, "Clock level specified %d is over max allowed %d\n", |
| soft_max_level, single_dpm_table->count - 1); |
| ret = -EINVAL; |
| break; |
| } |
| |
| ret = arcturus_upload_dpm_level(smu, |
| false, |
| FEATURE_DPM_GFXCLK_MASK, |
| soft_min_level); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to upload boot level to lowest!\n"); |
| break; |
| } |
| |
| ret = arcturus_upload_dpm_level(smu, |
| true, |
| FEATURE_DPM_GFXCLK_MASK, |
| soft_max_level); |
| if (ret) |
| dev_err(smu->adev->dev, "Failed to upload dpm max level to highest!\n"); |
| |
| break; |
| |
| case SMU_MCLK: |
| case SMU_SOCCLK: |
| case SMU_FCLK: |
| /* |
| * Should not arrive here since Arcturus does not |
| * support mclk/socclk/fclk softmin/softmax settings |
| */ |
| ret = -EINVAL; |
| break; |
| |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int arcturus_get_thermal_temperature_range(struct smu_context *smu, |
| struct smu_temperature_range *range) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| |
| if (!range) |
| return -EINVAL; |
| |
| memcpy(range, &smu11_thermal_policy[0], sizeof(struct smu_temperature_range)); |
| |
| range->max = pptable->TedgeLimit * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->edge_emergency_max = (pptable->TedgeLimit + CTF_OFFSET_EDGE) * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->hotspot_crit_max = pptable->ThotspotLimit * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->hotspot_emergency_max = (pptable->ThotspotLimit + CTF_OFFSET_HOTSPOT) * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->mem_crit_max = pptable->TmemLimit * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->mem_emergency_max = (pptable->TmemLimit + CTF_OFFSET_MEM)* |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->software_shutdown_temp = powerplay_table->software_shutdown_temp; |
| |
| return 0; |
| } |
| |
| static int arcturus_get_current_activity_percent(struct smu_context *smu, |
| enum amd_pp_sensors sensor, |
| uint32_t *value) |
| { |
| int ret = 0; |
| |
| if (!value) |
| return -EINVAL; |
| |
| switch (sensor) { |
| case AMDGPU_PP_SENSOR_GPU_LOAD: |
| ret = arcturus_get_smu_metrics_data(smu, |
| METRICS_AVERAGE_GFXACTIVITY, |
| value); |
| break; |
| case AMDGPU_PP_SENSOR_MEM_LOAD: |
| ret = arcturus_get_smu_metrics_data(smu, |
| METRICS_AVERAGE_MEMACTIVITY, |
| value); |
| break; |
| default: |
| dev_err(smu->adev->dev, "Invalid sensor for retrieving clock activity\n"); |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int arcturus_get_gpu_power(struct smu_context *smu, uint32_t *value) |
| { |
| if (!value) |
| return -EINVAL; |
| |
| return arcturus_get_smu_metrics_data(smu, |
| METRICS_AVERAGE_SOCKETPOWER, |
| value); |
| } |
| |
| static int arcturus_thermal_get_temperature(struct smu_context *smu, |
| enum amd_pp_sensors sensor, |
| uint32_t *value) |
| { |
| int ret = 0; |
| |
| if (!value) |
| return -EINVAL; |
| |
| switch (sensor) { |
| case AMDGPU_PP_SENSOR_HOTSPOT_TEMP: |
| ret = arcturus_get_smu_metrics_data(smu, |
| METRICS_TEMPERATURE_HOTSPOT, |
| value); |
| break; |
| case AMDGPU_PP_SENSOR_EDGE_TEMP: |
| ret = arcturus_get_smu_metrics_data(smu, |
| METRICS_TEMPERATURE_EDGE, |
| value); |
| break; |
| case AMDGPU_PP_SENSOR_MEM_TEMP: |
| ret = arcturus_get_smu_metrics_data(smu, |
| METRICS_TEMPERATURE_MEM, |
| value); |
| break; |
| default: |
| dev_err(smu->adev->dev, "Invalid sensor for retrieving temp\n"); |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int arcturus_read_sensor(struct smu_context *smu, |
| enum amd_pp_sensors sensor, |
| void *data, uint32_t *size) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *pptable = table_context->driver_pptable; |
| int ret = 0; |
| |
| if (amdgpu_ras_intr_triggered()) |
| return 0; |
| |
| if (!data || !size) |
| return -EINVAL; |
| |
| mutex_lock(&smu->sensor_lock); |
| switch (sensor) { |
| case AMDGPU_PP_SENSOR_MAX_FAN_RPM: |
| *(uint32_t *)data = pptable->FanMaximumRpm; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_MEM_LOAD: |
| case AMDGPU_PP_SENSOR_GPU_LOAD: |
| ret = arcturus_get_current_activity_percent(smu, |
| sensor, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GPU_POWER: |
| ret = arcturus_get_gpu_power(smu, (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_HOTSPOT_TEMP: |
| case AMDGPU_PP_SENSOR_EDGE_TEMP: |
| case AMDGPU_PP_SENSOR_MEM_TEMP: |
| ret = arcturus_thermal_get_temperature(smu, sensor, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GFX_MCLK: |
| ret = arcturus_get_current_clk_freq_by_table(smu, SMU_UCLK, (uint32_t *)data); |
| /* the output clock frequency in 10K unit */ |
| *(uint32_t *)data *= 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GFX_SCLK: |
| ret = arcturus_get_current_clk_freq_by_table(smu, SMU_GFXCLK, (uint32_t *)data); |
| *(uint32_t *)data *= 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_VDDGFX: |
| ret = smu_v11_0_get_gfx_vdd(smu, (uint32_t *)data); |
| *size = 4; |
| break; |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| mutex_unlock(&smu->sensor_lock); |
| |
| return ret; |
| } |
| |
| static int arcturus_get_fan_speed_rpm(struct smu_context *smu, |
| uint32_t *speed) |
| { |
| if (!speed) |
| return -EINVAL; |
| |
| switch (smu_v11_0_get_fan_control_mode(smu)) { |
| case AMD_FAN_CTRL_AUTO: |
| return arcturus_get_smu_metrics_data(smu, |
| METRICS_CURR_FANSPEED, |
| speed); |
| default: |
| return smu_v11_0_get_fan_speed_rpm(smu, speed); |
| } |
| } |
| |
| static int arcturus_get_fan_parameters(struct smu_context *smu) |
| { |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| |
| smu->fan_max_rpm = pptable->FanMaximumRpm; |
| |
| return 0; |
| } |
| |
| static int arcturus_get_power_limit(struct smu_context *smu) |
| { |
| struct smu_11_0_powerplay_table *powerplay_table = |
| (struct smu_11_0_powerplay_table *)smu->smu_table.power_play_table; |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| uint32_t power_limit, od_percent; |
| |
| if (smu_v11_0_get_current_power_limit(smu, &power_limit)) { |
| /* the last hope to figure out the ppt limit */ |
| if (!pptable) { |
| dev_err(smu->adev->dev, "Cannot get PPT limit due to pptable missing!"); |
| return -EINVAL; |
| } |
| power_limit = |
| pptable->SocketPowerLimitAc[PPT_THROTTLER_PPT0]; |
| } |
| smu->current_power_limit = power_limit; |
| |
| if (smu->od_enabled) { |
| od_percent = le32_to_cpu(powerplay_table->overdrive_table.max[SMU_11_0_ODSETTING_POWERPERCENTAGE]); |
| |
| dev_dbg(smu->adev->dev, "ODSETTING_POWERPERCENTAGE: %d (default: %d)\n", od_percent, power_limit); |
| |
| power_limit *= (100 + od_percent); |
| power_limit /= 100; |
| } |
| smu->max_power_limit = power_limit; |
| |
| return 0; |
| } |
| |
| static int arcturus_get_power_profile_mode(struct smu_context *smu, |
| char *buf) |
| { |
| DpmActivityMonitorCoeffInt_t activity_monitor; |
| static const char *profile_name[] = { |
| "BOOTUP_DEFAULT", |
| "3D_FULL_SCREEN", |
| "POWER_SAVING", |
| "VIDEO", |
| "VR", |
| "COMPUTE", |
| "CUSTOM"}; |
| static const char *title[] = { |
| "PROFILE_INDEX(NAME)", |
| "CLOCK_TYPE(NAME)", |
| "FPS", |
| "UseRlcBusy", |
| "MinActiveFreqType", |
| "MinActiveFreq", |
| "BoosterFreqType", |
| "BoosterFreq", |
| "PD_Data_limit_c", |
| "PD_Data_error_coeff", |
| "PD_Data_error_rate_coeff"}; |
| uint32_t i, size = 0; |
| int16_t workload_type = 0; |
| int result = 0; |
| uint32_t smu_version; |
| |
| if (!buf) |
| return -EINVAL; |
| |
| result = smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (result) |
| return result; |
| |
| if (smu_version >= 0x360d00) |
| size += sprintf(buf + size, "%16s %s %s %s %s %s %s %s %s %s %s\n", |
| title[0], title[1], title[2], title[3], title[4], title[5], |
| title[6], title[7], title[8], title[9], title[10]); |
| else |
| size += sprintf(buf + size, "%16s\n", |
| title[0]); |
| |
| for (i = 0; i <= PP_SMC_POWER_PROFILE_CUSTOM; i++) { |
| /* |
| * Conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT |
| * Not all profile modes are supported on arcturus. |
| */ |
| workload_type = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_WORKLOAD, |
| i); |
| if (workload_type < 0) |
| continue; |
| |
| if (smu_version >= 0x360d00) { |
| result = smu_cmn_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, |
| workload_type, |
| (void *)(&activity_monitor), |
| false); |
| if (result) { |
| dev_err(smu->adev->dev, "[%s] Failed to get activity monitor!", __func__); |
| return result; |
| } |
| } |
| |
| size += sprintf(buf + size, "%2d %14s%s\n", |
| i, profile_name[i], (i == smu->power_profile_mode) ? "*" : " "); |
| |
| if (smu_version >= 0x360d00) { |
| size += sprintf(buf + size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 0, |
| "GFXCLK", |
| activity_monitor.Gfx_FPS, |
| activity_monitor.Gfx_UseRlcBusy, |
| activity_monitor.Gfx_MinActiveFreqType, |
| activity_monitor.Gfx_MinActiveFreq, |
| activity_monitor.Gfx_BoosterFreqType, |
| activity_monitor.Gfx_BoosterFreq, |
| activity_monitor.Gfx_PD_Data_limit_c, |
| activity_monitor.Gfx_PD_Data_error_coeff, |
| activity_monitor.Gfx_PD_Data_error_rate_coeff); |
| |
| size += sprintf(buf + size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 1, |
| "UCLK", |
| activity_monitor.Mem_FPS, |
| activity_monitor.Mem_UseRlcBusy, |
| activity_monitor.Mem_MinActiveFreqType, |
| activity_monitor.Mem_MinActiveFreq, |
| activity_monitor.Mem_BoosterFreqType, |
| activity_monitor.Mem_BoosterFreq, |
| activity_monitor.Mem_PD_Data_limit_c, |
| activity_monitor.Mem_PD_Data_error_coeff, |
| activity_monitor.Mem_PD_Data_error_rate_coeff); |
| } |
| } |
| |
| return size; |
| } |
| |
| static int arcturus_set_power_profile_mode(struct smu_context *smu, |
| long *input, |
| uint32_t size) |
| { |
| DpmActivityMonitorCoeffInt_t activity_monitor; |
| int workload_type = 0; |
| uint32_t profile_mode = input[size]; |
| int ret = 0; |
| uint32_t smu_version; |
| |
| if (profile_mode > PP_SMC_POWER_PROFILE_CUSTOM) { |
| dev_err(smu->adev->dev, "Invalid power profile mode %d\n", profile_mode); |
| return -EINVAL; |
| } |
| |
| ret = smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (ret) |
| return ret; |
| |
| if ((profile_mode == PP_SMC_POWER_PROFILE_CUSTOM) && |
| (smu_version >=0x360d00)) { |
| ret = smu_cmn_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, |
| WORKLOAD_PPLIB_CUSTOM_BIT, |
| (void *)(&activity_monitor), |
| false); |
| if (ret) { |
| dev_err(smu->adev->dev, "[%s] Failed to get activity monitor!", __func__); |
| return ret; |
| } |
| |
| switch (input[0]) { |
| case 0: /* Gfxclk */ |
| activity_monitor.Gfx_FPS = input[1]; |
| activity_monitor.Gfx_UseRlcBusy = input[2]; |
| activity_monitor.Gfx_MinActiveFreqType = input[3]; |
| activity_monitor.Gfx_MinActiveFreq = input[4]; |
| activity_monitor.Gfx_BoosterFreqType = input[5]; |
| activity_monitor.Gfx_BoosterFreq = input[6]; |
| activity_monitor.Gfx_PD_Data_limit_c = input[7]; |
| activity_monitor.Gfx_PD_Data_error_coeff = input[8]; |
| activity_monitor.Gfx_PD_Data_error_rate_coeff = input[9]; |
| break; |
| case 1: /* Uclk */ |
| activity_monitor.Mem_FPS = input[1]; |
| activity_monitor.Mem_UseRlcBusy = input[2]; |
| activity_monitor.Mem_MinActiveFreqType = input[3]; |
| activity_monitor.Mem_MinActiveFreq = input[4]; |
| activity_monitor.Mem_BoosterFreqType = input[5]; |
| activity_monitor.Mem_BoosterFreq = input[6]; |
| activity_monitor.Mem_PD_Data_limit_c = input[7]; |
| activity_monitor.Mem_PD_Data_error_coeff = input[8]; |
| activity_monitor.Mem_PD_Data_error_rate_coeff = input[9]; |
| break; |
| } |
| |
| ret = smu_cmn_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, |
| WORKLOAD_PPLIB_CUSTOM_BIT, |
| (void *)(&activity_monitor), |
| true); |
| if (ret) { |
| dev_err(smu->adev->dev, "[%s] Failed to set activity monitor!", __func__); |
| return ret; |
| } |
| } |
| |
| /* |
| * Conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT |
| * Not all profile modes are supported on arcturus. |
| */ |
| workload_type = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_WORKLOAD, |
| profile_mode); |
| if (workload_type < 0) { |
| dev_err(smu->adev->dev, "Unsupported power profile mode %d on arcturus\n", profile_mode); |
| return -EINVAL; |
| } |
| |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_SetWorkloadMask, |
| 1 << workload_type, |
| NULL); |
| if (ret) { |
| dev_err(smu->adev->dev, "Fail to set workload type %d\n", workload_type); |
| return ret; |
| } |
| |
| smu->power_profile_mode = profile_mode; |
| |
| return 0; |
| } |
| |
| static int arcturus_set_performance_level(struct smu_context *smu, |
| enum amd_dpm_forced_level level) |
| { |
| uint32_t smu_version; |
| int ret; |
| |
| ret = smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to get smu version!\n"); |
| return ret; |
| } |
| |
| switch (level) { |
| case AMD_DPM_FORCED_LEVEL_HIGH: |
| case AMD_DPM_FORCED_LEVEL_LOW: |
| case AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD: |
| case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK: |
| case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_MCLK: |
| case AMD_DPM_FORCED_LEVEL_PROFILE_PEAK: |
| if ((smu_version >= 0x361200) && |
| (smu_version <= 0x361a00)) { |
| dev_err(smu->adev->dev, "Forcing clock level is not supported with " |
| "54.18 - 54.26(included) SMU firmwares\n"); |
| return -EOPNOTSUPP; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return smu_v11_0_set_performance_level(smu, level); |
| } |
| |
| static void arcturus_dump_pptable(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *pptable = table_context->driver_pptable; |
| int i; |
| |
| dev_info(smu->adev->dev, "Dumped PPTable:\n"); |
| |
| dev_info(smu->adev->dev, "Version = 0x%08x\n", pptable->Version); |
| |
| dev_info(smu->adev->dev, "FeaturesToRun[0] = 0x%08x\n", pptable->FeaturesToRun[0]); |
| dev_info(smu->adev->dev, "FeaturesToRun[1] = 0x%08x\n", pptable->FeaturesToRun[1]); |
| |
| for (i = 0; i < PPT_THROTTLER_COUNT; i++) { |
| dev_info(smu->adev->dev, "SocketPowerLimitAc[%d] = %d\n", i, pptable->SocketPowerLimitAc[i]); |
| dev_info(smu->adev->dev, "SocketPowerLimitAcTau[%d] = %d\n", i, pptable->SocketPowerLimitAcTau[i]); |
| } |
| |
| dev_info(smu->adev->dev, "TdcLimitSoc = %d\n", pptable->TdcLimitSoc); |
| dev_info(smu->adev->dev, "TdcLimitSocTau = %d\n", pptable->TdcLimitSocTau); |
| dev_info(smu->adev->dev, "TdcLimitGfx = %d\n", pptable->TdcLimitGfx); |
| dev_info(smu->adev->dev, "TdcLimitGfxTau = %d\n", pptable->TdcLimitGfxTau); |
| |
| dev_info(smu->adev->dev, "TedgeLimit = %d\n", pptable->TedgeLimit); |
| dev_info(smu->adev->dev, "ThotspotLimit = %d\n", pptable->ThotspotLimit); |
| dev_info(smu->adev->dev, "TmemLimit = %d\n", pptable->TmemLimit); |
| dev_info(smu->adev->dev, "Tvr_gfxLimit = %d\n", pptable->Tvr_gfxLimit); |
| dev_info(smu->adev->dev, "Tvr_memLimit = %d\n", pptable->Tvr_memLimit); |
| dev_info(smu->adev->dev, "Tvr_socLimit = %d\n", pptable->Tvr_socLimit); |
| dev_info(smu->adev->dev, "FitLimit = %d\n", pptable->FitLimit); |
| |
| dev_info(smu->adev->dev, "PpmPowerLimit = %d\n", pptable->PpmPowerLimit); |
| dev_info(smu->adev->dev, "PpmTemperatureThreshold = %d\n", pptable->PpmTemperatureThreshold); |
| |
| dev_info(smu->adev->dev, "ThrottlerControlMask = %d\n", pptable->ThrottlerControlMask); |
| |
| dev_info(smu->adev->dev, "UlvVoltageOffsetGfx = %d\n", pptable->UlvVoltageOffsetGfx); |
| dev_info(smu->adev->dev, "UlvPadding = 0x%08x\n", pptable->UlvPadding); |
| |
| dev_info(smu->adev->dev, "UlvGfxclkBypass = %d\n", pptable->UlvGfxclkBypass); |
| dev_info(smu->adev->dev, "Padding234[0] = 0x%02x\n", pptable->Padding234[0]); |
| dev_info(smu->adev->dev, "Padding234[1] = 0x%02x\n", pptable->Padding234[1]); |
| dev_info(smu->adev->dev, "Padding234[2] = 0x%02x\n", pptable->Padding234[2]); |
| |
| dev_info(smu->adev->dev, "MinVoltageGfx = %d\n", pptable->MinVoltageGfx); |
| dev_info(smu->adev->dev, "MinVoltageSoc = %d\n", pptable->MinVoltageSoc); |
| dev_info(smu->adev->dev, "MaxVoltageGfx = %d\n", pptable->MaxVoltageGfx); |
| dev_info(smu->adev->dev, "MaxVoltageSoc = %d\n", pptable->MaxVoltageSoc); |
| |
| dev_info(smu->adev->dev, "LoadLineResistanceGfx = %d\n", pptable->LoadLineResistanceGfx); |
| dev_info(smu->adev->dev, "LoadLineResistanceSoc = %d\n", pptable->LoadLineResistanceSoc); |
| |
| dev_info(smu->adev->dev, "[PPCLK_GFXCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_GFXCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].padding, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_GFXCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_VCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_VCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_VCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_VCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_VCLK].padding, |
| pptable->DpmDescriptor[PPCLK_VCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_VCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_VCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_VCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_VCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_VCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_VCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_DCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_DCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_DCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_DCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_DCLK].padding, |
| pptable->DpmDescriptor[PPCLK_DCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_DCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_DCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_DCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_DCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_DCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_DCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_SOCCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_SOCCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].padding, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_SOCCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_UCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_UCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_UCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_UCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_UCLK].padding, |
| pptable->DpmDescriptor[PPCLK_UCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_UCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_UCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_UCLK].Padding16); |
| |
| dev_info(smu->adev->dev, "[PPCLK_FCLK]\n" |
| " .VoltageMode = 0x%02x\n" |
| " .SnapToDiscrete = 0x%02x\n" |
| " .NumDiscreteLevels = 0x%02x\n" |
| " .padding = 0x%02x\n" |
| " .ConversionToAvfsClk{m = 0x%08x b = 0x%08x}\n" |
| " .SsCurve {a = 0x%08x b = 0x%08x c = 0x%08x}\n" |
| " .SsFmin = 0x%04x\n" |
| " .Padding_16 = 0x%04x\n", |
| pptable->DpmDescriptor[PPCLK_FCLK].VoltageMode, |
| pptable->DpmDescriptor[PPCLK_FCLK].SnapToDiscrete, |
| pptable->DpmDescriptor[PPCLK_FCLK].NumDiscreteLevels, |
| pptable->DpmDescriptor[PPCLK_FCLK].padding, |
| pptable->DpmDescriptor[PPCLK_FCLK].ConversionToAvfsClk.m, |
| pptable->DpmDescriptor[PPCLK_FCLK].ConversionToAvfsClk.b, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsCurve.a, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsCurve.b, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsCurve.c, |
| pptable->DpmDescriptor[PPCLK_FCLK].SsFmin, |
| pptable->DpmDescriptor[PPCLK_FCLK].Padding16); |
| |
| |
| dev_info(smu->adev->dev, "FreqTableGfx\n"); |
| for (i = 0; i < NUM_GFXCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = %d\n", i, pptable->FreqTableGfx[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableVclk\n"); |
| for (i = 0; i < NUM_VCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = %d\n", i, pptable->FreqTableVclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableDclk\n"); |
| for (i = 0; i < NUM_DCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = %d\n", i, pptable->FreqTableDclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableSocclk\n"); |
| for (i = 0; i < NUM_SOCCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = %d\n", i, pptable->FreqTableSocclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableUclk\n"); |
| for (i = 0; i < NUM_UCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = %d\n", i, pptable->FreqTableUclk[i]); |
| |
| dev_info(smu->adev->dev, "FreqTableFclk\n"); |
| for (i = 0; i < NUM_FCLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%02d] = %d\n", i, pptable->FreqTableFclk[i]); |
| |
| dev_info(smu->adev->dev, "Mp0clkFreq\n"); |
| for (i = 0; i < NUM_MP0CLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = %d\n", i, pptable->Mp0clkFreq[i]); |
| |
| dev_info(smu->adev->dev, "Mp0DpmVoltage\n"); |
| for (i = 0; i < NUM_MP0CLK_DPM_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = %d\n", i, pptable->Mp0DpmVoltage[i]); |
| |
| dev_info(smu->adev->dev, "GfxclkFidle = 0x%x\n", pptable->GfxclkFidle); |
| dev_info(smu->adev->dev, "GfxclkSlewRate = 0x%x\n", pptable->GfxclkSlewRate); |
| dev_info(smu->adev->dev, "Padding567[0] = 0x%x\n", pptable->Padding567[0]); |
| dev_info(smu->adev->dev, "Padding567[1] = 0x%x\n", pptable->Padding567[1]); |
| dev_info(smu->adev->dev, "Padding567[2] = 0x%x\n", pptable->Padding567[2]); |
| dev_info(smu->adev->dev, "Padding567[3] = 0x%x\n", pptable->Padding567[3]); |
| dev_info(smu->adev->dev, "GfxclkDsMaxFreq = %d\n", pptable->GfxclkDsMaxFreq); |
| dev_info(smu->adev->dev, "GfxclkSource = 0x%x\n", pptable->GfxclkSource); |
| dev_info(smu->adev->dev, "Padding456 = 0x%x\n", pptable->Padding456); |
| |
| dev_info(smu->adev->dev, "EnableTdpm = %d\n", pptable->EnableTdpm); |
| dev_info(smu->adev->dev, "TdpmHighHystTemperature = %d\n", pptable->TdpmHighHystTemperature); |
| dev_info(smu->adev->dev, "TdpmLowHystTemperature = %d\n", pptable->TdpmLowHystTemperature); |
| dev_info(smu->adev->dev, "GfxclkFreqHighTempLimit = %d\n", pptable->GfxclkFreqHighTempLimit); |
| |
| dev_info(smu->adev->dev, "FanStopTemp = %d\n", pptable->FanStopTemp); |
| dev_info(smu->adev->dev, "FanStartTemp = %d\n", pptable->FanStartTemp); |
| |
| dev_info(smu->adev->dev, "FanGainEdge = %d\n", pptable->FanGainEdge); |
| dev_info(smu->adev->dev, "FanGainHotspot = %d\n", pptable->FanGainHotspot); |
| dev_info(smu->adev->dev, "FanGainVrGfx = %d\n", pptable->FanGainVrGfx); |
| dev_info(smu->adev->dev, "FanGainVrSoc = %d\n", pptable->FanGainVrSoc); |
| dev_info(smu->adev->dev, "FanGainVrMem = %d\n", pptable->FanGainVrMem); |
| dev_info(smu->adev->dev, "FanGainHbm = %d\n", pptable->FanGainHbm); |
| |
| dev_info(smu->adev->dev, "FanPwmMin = %d\n", pptable->FanPwmMin); |
| dev_info(smu->adev->dev, "FanAcousticLimitRpm = %d\n", pptable->FanAcousticLimitRpm); |
| dev_info(smu->adev->dev, "FanThrottlingRpm = %d\n", pptable->FanThrottlingRpm); |
| dev_info(smu->adev->dev, "FanMaximumRpm = %d\n", pptable->FanMaximumRpm); |
| dev_info(smu->adev->dev, "FanTargetTemperature = %d\n", pptable->FanTargetTemperature); |
| dev_info(smu->adev->dev, "FanTargetGfxclk = %d\n", pptable->FanTargetGfxclk); |
| dev_info(smu->adev->dev, "FanZeroRpmEnable = %d\n", pptable->FanZeroRpmEnable); |
| dev_info(smu->adev->dev, "FanTachEdgePerRev = %d\n", pptable->FanTachEdgePerRev); |
| dev_info(smu->adev->dev, "FanTempInputSelect = %d\n", pptable->FanTempInputSelect); |
| |
| dev_info(smu->adev->dev, "FuzzyFan_ErrorSetDelta = %d\n", pptable->FuzzyFan_ErrorSetDelta); |
| dev_info(smu->adev->dev, "FuzzyFan_ErrorRateSetDelta = %d\n", pptable->FuzzyFan_ErrorRateSetDelta); |
| dev_info(smu->adev->dev, "FuzzyFan_PwmSetDelta = %d\n", pptable->FuzzyFan_PwmSetDelta); |
| dev_info(smu->adev->dev, "FuzzyFan_Reserved = %d\n", pptable->FuzzyFan_Reserved); |
| |
| dev_info(smu->adev->dev, "OverrideAvfsGb[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->OverrideAvfsGb[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "OverrideAvfsGb[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->OverrideAvfsGb[AVFS_VOLTAGE_SOC]); |
| dev_info(smu->adev->dev, "Padding8_Avfs[0] = %d\n", pptable->Padding8_Avfs[0]); |
| dev_info(smu->adev->dev, "Padding8_Avfs[1] = %d\n", pptable->Padding8_Avfs[1]); |
| |
| dev_info(smu->adev->dev, "dBtcGbGfxPll{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->dBtcGbGfxPll.a, |
| pptable->dBtcGbGfxPll.b, |
| pptable->dBtcGbGfxPll.c); |
| dev_info(smu->adev->dev, "dBtcGbGfxAfll{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->dBtcGbGfxAfll.a, |
| pptable->dBtcGbGfxAfll.b, |
| pptable->dBtcGbGfxAfll.c); |
| dev_info(smu->adev->dev, "dBtcGbSoc{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->dBtcGbSoc.a, |
| pptable->dBtcGbSoc.b, |
| pptable->dBtcGbSoc.c); |
| |
| dev_info(smu->adev->dev, "qAgingGb[AVFS_VOLTAGE_GFX]{m = 0x%x b = 0x%x}\n", |
| pptable->qAgingGb[AVFS_VOLTAGE_GFX].m, |
| pptable->qAgingGb[AVFS_VOLTAGE_GFX].b); |
| dev_info(smu->adev->dev, "qAgingGb[AVFS_VOLTAGE_SOC]{m = 0x%x b = 0x%x}\n", |
| pptable->qAgingGb[AVFS_VOLTAGE_SOC].m, |
| pptable->qAgingGb[AVFS_VOLTAGE_SOC].b); |
| |
| dev_info(smu->adev->dev, "qStaticVoltageOffset[AVFS_VOLTAGE_GFX]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_GFX].a, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_GFX].b, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_GFX].c); |
| dev_info(smu->adev->dev, "qStaticVoltageOffset[AVFS_VOLTAGE_SOC]{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_SOC].a, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_SOC].b, |
| pptable->qStaticVoltageOffset[AVFS_VOLTAGE_SOC].c); |
| |
| dev_info(smu->adev->dev, "DcTol[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcTol[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcTol[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcTol[AVFS_VOLTAGE_SOC]); |
| |
| dev_info(smu->adev->dev, "DcBtcEnabled[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcEnabled[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcEnabled[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcEnabled[AVFS_VOLTAGE_SOC]); |
| dev_info(smu->adev->dev, "Padding8_GfxBtc[0] = 0x%x\n", pptable->Padding8_GfxBtc[0]); |
| dev_info(smu->adev->dev, "Padding8_GfxBtc[1] = 0x%x\n", pptable->Padding8_GfxBtc[1]); |
| |
| dev_info(smu->adev->dev, "DcBtcMin[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcMin[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcMin[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcMin[AVFS_VOLTAGE_SOC]); |
| dev_info(smu->adev->dev, "DcBtcMax[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcMax[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcMax[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcMax[AVFS_VOLTAGE_SOC]); |
| |
| dev_info(smu->adev->dev, "DcBtcGb[AVFS_VOLTAGE_GFX] = 0x%x\n", pptable->DcBtcGb[AVFS_VOLTAGE_GFX]); |
| dev_info(smu->adev->dev, "DcBtcGb[AVFS_VOLTAGE_SOC] = 0x%x\n", pptable->DcBtcGb[AVFS_VOLTAGE_SOC]); |
| |
| dev_info(smu->adev->dev, "XgmiDpmPstates\n"); |
| for (i = 0; i < NUM_XGMI_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = %d\n", i, pptable->XgmiDpmPstates[i]); |
| dev_info(smu->adev->dev, "XgmiDpmSpare[0] = 0x%02x\n", pptable->XgmiDpmSpare[0]); |
| dev_info(smu->adev->dev, "XgmiDpmSpare[1] = 0x%02x\n", pptable->XgmiDpmSpare[1]); |
| |
| dev_info(smu->adev->dev, "VDDGFX_TVmin = %d\n", pptable->VDDGFX_TVmin); |
| dev_info(smu->adev->dev, "VDDSOC_TVmin = %d\n", pptable->VDDSOC_TVmin); |
| dev_info(smu->adev->dev, "VDDGFX_Vmin_HiTemp = %d\n", pptable->VDDGFX_Vmin_HiTemp); |
| dev_info(smu->adev->dev, "VDDGFX_Vmin_LoTemp = %d\n", pptable->VDDGFX_Vmin_LoTemp); |
| dev_info(smu->adev->dev, "VDDSOC_Vmin_HiTemp = %d\n", pptable->VDDSOC_Vmin_HiTemp); |
| dev_info(smu->adev->dev, "VDDSOC_Vmin_LoTemp = %d\n", pptable->VDDSOC_Vmin_LoTemp); |
| dev_info(smu->adev->dev, "VDDGFX_TVminHystersis = %d\n", pptable->VDDGFX_TVminHystersis); |
| dev_info(smu->adev->dev, "VDDSOC_TVminHystersis = %d\n", pptable->VDDSOC_TVminHystersis); |
| |
| dev_info(smu->adev->dev, "DebugOverrides = 0x%x\n", pptable->DebugOverrides); |
| dev_info(smu->adev->dev, "ReservedEquation0{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation0.a, |
| pptable->ReservedEquation0.b, |
| pptable->ReservedEquation0.c); |
| dev_info(smu->adev->dev, "ReservedEquation1{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation1.a, |
| pptable->ReservedEquation1.b, |
| pptable->ReservedEquation1.c); |
| dev_info(smu->adev->dev, "ReservedEquation2{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation2.a, |
| pptable->ReservedEquation2.b, |
| pptable->ReservedEquation2.c); |
| dev_info(smu->adev->dev, "ReservedEquation3{a = 0x%x b = 0x%x c = 0x%x}\n", |
| pptable->ReservedEquation3.a, |
| pptable->ReservedEquation3.b, |
| pptable->ReservedEquation3.c); |
| |
| dev_info(smu->adev->dev, "MinVoltageUlvGfx = %d\n", pptable->MinVoltageUlvGfx); |
| dev_info(smu->adev->dev, "PaddingUlv = %d\n", pptable->PaddingUlv); |
| |
| dev_info(smu->adev->dev, "TotalPowerConfig = %d\n", pptable->TotalPowerConfig); |
| dev_info(smu->adev->dev, "TotalPowerSpare1 = %d\n", pptable->TotalPowerSpare1); |
| dev_info(smu->adev->dev, "TotalPowerSpare2 = %d\n", pptable->TotalPowerSpare2); |
| |
| dev_info(smu->adev->dev, "PccThresholdLow = %d\n", pptable->PccThresholdLow); |
| dev_info(smu->adev->dev, "PccThresholdHigh = %d\n", pptable->PccThresholdHigh); |
| |
| dev_info(smu->adev->dev, "Board Parameters:\n"); |
| dev_info(smu->adev->dev, "MaxVoltageStepGfx = 0x%x\n", pptable->MaxVoltageStepGfx); |
| dev_info(smu->adev->dev, "MaxVoltageStepSoc = 0x%x\n", pptable->MaxVoltageStepSoc); |
| |
| dev_info(smu->adev->dev, "VddGfxVrMapping = 0x%x\n", pptable->VddGfxVrMapping); |
| dev_info(smu->adev->dev, "VddSocVrMapping = 0x%x\n", pptable->VddSocVrMapping); |
| dev_info(smu->adev->dev, "VddMemVrMapping = 0x%x\n", pptable->VddMemVrMapping); |
| dev_info(smu->adev->dev, "BoardVrMapping = 0x%x\n", pptable->BoardVrMapping); |
| |
| dev_info(smu->adev->dev, "GfxUlvPhaseSheddingMask = 0x%x\n", pptable->GfxUlvPhaseSheddingMask); |
| dev_info(smu->adev->dev, "ExternalSensorPresent = 0x%x\n", pptable->ExternalSensorPresent); |
| |
| dev_info(smu->adev->dev, "GfxMaxCurrent = 0x%x\n", pptable->GfxMaxCurrent); |
| dev_info(smu->adev->dev, "GfxOffset = 0x%x\n", pptable->GfxOffset); |
| dev_info(smu->adev->dev, "Padding_TelemetryGfx = 0x%x\n", pptable->Padding_TelemetryGfx); |
| |
| dev_info(smu->adev->dev, "SocMaxCurrent = 0x%x\n", pptable->SocMaxCurrent); |
| dev_info(smu->adev->dev, "SocOffset = 0x%x\n", pptable->SocOffset); |
| dev_info(smu->adev->dev, "Padding_TelemetrySoc = 0x%x\n", pptable->Padding_TelemetrySoc); |
| |
| dev_info(smu->adev->dev, "MemMaxCurrent = 0x%x\n", pptable->MemMaxCurrent); |
| dev_info(smu->adev->dev, "MemOffset = 0x%x\n", pptable->MemOffset); |
| dev_info(smu->adev->dev, "Padding_TelemetryMem = 0x%x\n", pptable->Padding_TelemetryMem); |
| |
| dev_info(smu->adev->dev, "BoardMaxCurrent = 0x%x\n", pptable->BoardMaxCurrent); |
| dev_info(smu->adev->dev, "BoardOffset = 0x%x\n", pptable->BoardOffset); |
| dev_info(smu->adev->dev, "Padding_TelemetryBoardInput = 0x%x\n", pptable->Padding_TelemetryBoardInput); |
| |
| dev_info(smu->adev->dev, "VR0HotGpio = %d\n", pptable->VR0HotGpio); |
| dev_info(smu->adev->dev, "VR0HotPolarity = %d\n", pptable->VR0HotPolarity); |
| dev_info(smu->adev->dev, "VR1HotGpio = %d\n", pptable->VR1HotGpio); |
| dev_info(smu->adev->dev, "VR1HotPolarity = %d\n", pptable->VR1HotPolarity); |
| |
| dev_info(smu->adev->dev, "PllGfxclkSpreadEnabled = %d\n", pptable->PllGfxclkSpreadEnabled); |
| dev_info(smu->adev->dev, "PllGfxclkSpreadPercent = %d\n", pptable->PllGfxclkSpreadPercent); |
| dev_info(smu->adev->dev, "PllGfxclkSpreadFreq = %d\n", pptable->PllGfxclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "UclkSpreadEnabled = %d\n", pptable->UclkSpreadEnabled); |
| dev_info(smu->adev->dev, "UclkSpreadPercent = %d\n", pptable->UclkSpreadPercent); |
| dev_info(smu->adev->dev, "UclkSpreadFreq = %d\n", pptable->UclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "FclkSpreadEnabled = %d\n", pptable->FclkSpreadEnabled); |
| dev_info(smu->adev->dev, "FclkSpreadPercent = %d\n", pptable->FclkSpreadPercent); |
| dev_info(smu->adev->dev, "FclkSpreadFreq = %d\n", pptable->FclkSpreadFreq); |
| |
| dev_info(smu->adev->dev, "FllGfxclkSpreadEnabled = %d\n", pptable->FllGfxclkSpreadEnabled); |
| dev_info(smu->adev->dev, "FllGfxclkSpreadPercent = %d\n", pptable->FllGfxclkSpreadPercent); |
| dev_info(smu->adev->dev, "FllGfxclkSpreadFreq = %d\n", pptable->FllGfxclkSpreadFreq); |
| |
| for (i = 0; i < NUM_I2C_CONTROLLERS; i++) { |
| dev_info(smu->adev->dev, "I2cControllers[%d]:\n", i); |
| dev_info(smu->adev->dev, " .Enabled = %d\n", |
| pptable->I2cControllers[i].Enabled); |
| dev_info(smu->adev->dev, " .SlaveAddress = 0x%x\n", |
| pptable->I2cControllers[i].SlaveAddress); |
| dev_info(smu->adev->dev, " .ControllerPort = %d\n", |
| pptable->I2cControllers[i].ControllerPort); |
| dev_info(smu->adev->dev, " .ControllerName = %d\n", |
| pptable->I2cControllers[i].ControllerName); |
| dev_info(smu->adev->dev, " .ThermalThrottler = %d\n", |
| pptable->I2cControllers[i].ThermalThrotter); |
| dev_info(smu->adev->dev, " .I2cProtocol = %d\n", |
| pptable->I2cControllers[i].I2cProtocol); |
| dev_info(smu->adev->dev, " .Speed = %d\n", |
| pptable->I2cControllers[i].Speed); |
| } |
| |
| dev_info(smu->adev->dev, "MemoryChannelEnabled = %d\n", pptable->MemoryChannelEnabled); |
| dev_info(smu->adev->dev, "DramBitWidth = %d\n", pptable->DramBitWidth); |
| |
| dev_info(smu->adev->dev, "TotalBoardPower = %d\n", pptable->TotalBoardPower); |
| |
| dev_info(smu->adev->dev, "XgmiLinkSpeed\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = %d\n", i, pptable->XgmiLinkSpeed[i]); |
| dev_info(smu->adev->dev, "XgmiLinkWidth\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = %d\n", i, pptable->XgmiLinkWidth[i]); |
| dev_info(smu->adev->dev, "XgmiFclkFreq\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = %d\n", i, pptable->XgmiFclkFreq[i]); |
| dev_info(smu->adev->dev, "XgmiSocVoltage\n"); |
| for (i = 0; i < NUM_XGMI_PSTATE_LEVELS; i++) |
| dev_info(smu->adev->dev, " .[%d] = %d\n", i, pptable->XgmiSocVoltage[i]); |
| |
| } |
| |
| static bool arcturus_is_dpm_running(struct smu_context *smu) |
| { |
| int ret = 0; |
| uint32_t feature_mask[2]; |
| uint64_t feature_enabled; |
| |
| ret = smu_cmn_get_enabled_mask(smu, feature_mask, 2); |
| if (ret) |
| return false; |
| |
| feature_enabled = (uint64_t)feature_mask[1] << 32 | feature_mask[0]; |
| |
| return !!(feature_enabled & SMC_DPM_FEATURE); |
| } |
| |
| static int arcturus_dpm_set_vcn_enable(struct smu_context *smu, bool enable) |
| { |
| int ret = 0; |
| |
| if (enable) { |
| if (!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { |
| ret = smu_cmn_feature_set_enabled(smu, SMU_FEATURE_VCN_PG_BIT, 1); |
| if (ret) { |
| dev_err(smu->adev->dev, "[EnableVCNDPM] failed!\n"); |
| return ret; |
| } |
| } |
| } else { |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { |
| ret = smu_cmn_feature_set_enabled(smu, SMU_FEATURE_VCN_PG_BIT, 0); |
| if (ret) { |
| dev_err(smu->adev->dev, "[DisableVCNDPM] failed!\n"); |
| return ret; |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void arcturus_fill_i2c_req(SwI2cRequest_t *req, bool write, |
| uint8_t address, uint32_t numbytes, |
| uint8_t *data) |
| { |
| int i; |
| |
| req->I2CcontrollerPort = 0; |
| req->I2CSpeed = 2; |
| req->SlaveAddress = address; |
| req->NumCmds = numbytes; |
| |
| for (i = 0; i < numbytes; i++) { |
| SwI2cCmd_t *cmd = &req->SwI2cCmds[i]; |
| |
| /* First 2 bytes are always write for lower 2b EEPROM address */ |
| if (i < 2) |
| cmd->Cmd = 1; |
| else |
| cmd->Cmd = write; |
| |
| |
| /* Add RESTART for read after address filled */ |
| cmd->CmdConfig |= (i == 2 && !write) ? CMDCONFIG_RESTART_MASK : 0; |
| |
| /* Add STOP in the end */ |
| cmd->CmdConfig |= (i == (numbytes - 1)) ? CMDCONFIG_STOP_MASK : 0; |
| |
| /* Fill with data regardless if read or write to simplify code */ |
| cmd->RegisterAddr = data[i]; |
| } |
| } |
| |
| static int arcturus_i2c_read_data(struct i2c_adapter *control, |
| uint8_t address, |
| uint8_t *data, |
| uint32_t numbytes) |
| { |
| uint32_t i, ret = 0; |
| SwI2cRequest_t req; |
| struct amdgpu_device *adev = to_amdgpu_device(control); |
| struct smu_table_context *smu_table = &adev->smu.smu_table; |
| struct smu_table *table = &smu_table->driver_table; |
| |
| if (numbytes > MAX_SW_I2C_COMMANDS) { |
| dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n", |
| numbytes, MAX_SW_I2C_COMMANDS); |
| return -EINVAL; |
| } |
| |
| memset(&req, 0, sizeof(req)); |
| arcturus_fill_i2c_req(&req, false, address, numbytes, data); |
| |
| mutex_lock(&adev->smu.mutex); |
| /* Now read data starting with that address */ |
| ret = smu_cmn_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req, |
| true); |
| mutex_unlock(&adev->smu.mutex); |
| |
| if (!ret) { |
| SwI2cRequest_t *res = (SwI2cRequest_t *)table->cpu_addr; |
| |
| /* Assume SMU fills res.SwI2cCmds[i].Data with read bytes */ |
| for (i = 0; i < numbytes; i++) |
| data[i] = res->SwI2cCmds[i].Data; |
| |
| dev_dbg(adev->dev, "arcturus_i2c_read_data, address = %x, bytes = %d, data :", |
| (uint16_t)address, numbytes); |
| |
| print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, |
| 8, 1, data, numbytes, false); |
| } else |
| dev_err(adev->dev, "arcturus_i2c_read_data - error occurred :%x", ret); |
| |
| return ret; |
| } |
| |
| static int arcturus_i2c_write_data(struct i2c_adapter *control, |
| uint8_t address, |
| uint8_t *data, |
| uint32_t numbytes) |
| { |
| uint32_t ret; |
| SwI2cRequest_t req; |
| struct amdgpu_device *adev = to_amdgpu_device(control); |
| |
| if (numbytes > MAX_SW_I2C_COMMANDS) { |
| dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n", |
| numbytes, MAX_SW_I2C_COMMANDS); |
| return -EINVAL; |
| } |
| |
| memset(&req, 0, sizeof(req)); |
| arcturus_fill_i2c_req(&req, true, address, numbytes, data); |
| |
| mutex_lock(&adev->smu.mutex); |
| ret = smu_cmn_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req, true); |
| mutex_unlock(&adev->smu.mutex); |
| |
| if (!ret) { |
| dev_dbg(adev->dev, "arcturus_i2c_write(), address = %x, bytes = %d , data: ", |
| (uint16_t)address, numbytes); |
| |
| print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, |
| 8, 1, data, numbytes, false); |
| /* |
| * According to EEPROM spec there is a MAX of 10 ms required for |
| * EEPROM to flush internal RX buffer after STOP was issued at the |
| * end of write transaction. During this time the EEPROM will not be |
| * responsive to any more commands - so wait a bit more. |
| */ |
| msleep(10); |
| |
| } else |
| dev_err(adev->dev, "arcturus_i2c_write- error occurred :%x", ret); |
| |
| return ret; |
| } |
| |
| static int arcturus_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msgs, int num) |
| { |
| uint32_t i, j, ret, data_size, data_chunk_size, next_eeprom_addr = 0; |
| uint8_t *data_ptr, data_chunk[MAX_SW_I2C_COMMANDS] = { 0 }; |
| |
| for (i = 0; i < num; i++) { |
| /* |
| * SMU interface allows at most MAX_SW_I2C_COMMANDS bytes of data at |
| * once and hence the data needs to be spliced into chunks and sent each |
| * chunk separately |
| */ |
| data_size = msgs[i].len - 2; |
| data_chunk_size = MAX_SW_I2C_COMMANDS - 2; |
| next_eeprom_addr = (msgs[i].buf[0] << 8 & 0xff00) | (msgs[i].buf[1] & 0xff); |
| data_ptr = msgs[i].buf + 2; |
| |
| for (j = 0; j < data_size / data_chunk_size; j++) { |
| /* Insert the EEPROM dest addess, bits 0-15 */ |
| data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff); |
| data_chunk[1] = (next_eeprom_addr & 0xff); |
| |
| if (msgs[i].flags & I2C_M_RD) { |
| ret = arcturus_i2c_read_data(i2c_adap, |
| (uint8_t)msgs[i].addr, |
| data_chunk, MAX_SW_I2C_COMMANDS); |
| |
| memcpy(data_ptr, data_chunk + 2, data_chunk_size); |
| } else { |
| |
| memcpy(data_chunk + 2, data_ptr, data_chunk_size); |
| |
| ret = arcturus_i2c_write_data(i2c_adap, |
| (uint8_t)msgs[i].addr, |
| data_chunk, MAX_SW_I2C_COMMANDS); |
| } |
| |
| if (ret) { |
| num = -EIO; |
| goto fail; |
| } |
| |
| next_eeprom_addr += data_chunk_size; |
| data_ptr += data_chunk_size; |
| } |
| |
| if (data_size % data_chunk_size) { |
| data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff); |
| data_chunk[1] = (next_eeprom_addr & 0xff); |
| |
| if (msgs[i].flags & I2C_M_RD) { |
| ret = arcturus_i2c_read_data(i2c_adap, |
| (uint8_t)msgs[i].addr, |
| data_chunk, (data_size % data_chunk_size) + 2); |
| |
| memcpy(data_ptr, data_chunk + 2, data_size % data_chunk_size); |
| } else { |
| memcpy(data_chunk + 2, data_ptr, data_size % data_chunk_size); |
| |
| ret = arcturus_i2c_write_data(i2c_adap, |
| (uint8_t)msgs[i].addr, |
| data_chunk, (data_size % data_chunk_size) + 2); |
| } |
| |
| if (ret) { |
| num = -EIO; |
| goto fail; |
| } |
| } |
| } |
| |
| fail: |
| return num; |
| } |
| |
| static u32 arcturus_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| |
| static const struct i2c_algorithm arcturus_i2c_algo = { |
| .master_xfer = arcturus_i2c_xfer, |
| .functionality = arcturus_i2c_func, |
| }; |
| |
| static int arcturus_i2c_control_init(struct smu_context *smu, struct i2c_adapter *control) |
| { |
| struct amdgpu_device *adev = to_amdgpu_device(control); |
| int res; |
| |
| control->owner = THIS_MODULE; |
| control->class = I2C_CLASS_SPD; |
| control->dev.parent = &adev->pdev->dev; |
| control->algo = &arcturus_i2c_algo; |
| snprintf(control->name, sizeof(control->name), "AMDGPU SMU"); |
| |
| res = i2c_add_adapter(control); |
| if (res) |
| DRM_ERROR("Failed to register hw i2c, err: %d\n", res); |
| |
| return res; |
| } |
| |
| static void arcturus_i2c_control_fini(struct smu_context *smu, struct i2c_adapter *control) |
| { |
| i2c_del_adapter(control); |
| } |
| |
| static void arcturus_get_unique_id(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t top32 = 0, bottom32 = 0, smu_version; |
| uint64_t id; |
| |
| if (smu_cmn_get_smc_version(smu, NULL, &smu_version)) { |
| dev_warn(adev->dev, "Failed to get smu version, cannot get unique_id or serial_number\n"); |
| return; |
| } |
| |
| /* PPSMC_MSG_ReadSerial* is supported by 54.23.0 and onwards */ |
| if (smu_version < 0x361700) { |
| dev_warn(adev->dev, "ReadSerial is only supported by PMFW 54.23.0 and onwards\n"); |
| return; |
| } |
| |
| /* Get the SN to turn into a Unique ID */ |
| smu_cmn_send_smc_msg(smu, SMU_MSG_ReadSerialNumTop32, &top32); |
| smu_cmn_send_smc_msg(smu, SMU_MSG_ReadSerialNumBottom32, &bottom32); |
| |
| id = ((uint64_t)bottom32 << 32) | top32; |
| adev->unique_id = id; |
| /* For Arcturus-and-later, unique_id == serial_number, so convert it to a |
| * 16-digit HEX string for convenience and backwards-compatibility |
| */ |
| sprintf(adev->serial, "%llx", id); |
| } |
| |
| static bool arcturus_is_baco_supported(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t val; |
| |
| if (!smu_v11_0_baco_is_support(smu) || amdgpu_sriov_vf(adev)) |
| return false; |
| |
| val = RREG32_SOC15(NBIO, 0, mmRCC_BIF_STRAP0); |
| return (val & RCC_BIF_STRAP0__STRAP_PX_CAPABLE_MASK) ? true : false; |
| } |
| |
| static int arcturus_set_df_cstate(struct smu_context *smu, |
| enum pp_df_cstate state) |
| { |
| uint32_t smu_version; |
| int ret; |
| |
| ret = smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to get smu version!\n"); |
| return ret; |
| } |
| |
| /* PPSMC_MSG_DFCstateControl is supported by 54.15.0 and onwards */ |
| if (smu_version < 0x360F00) { |
| dev_err(smu->adev->dev, "DFCstateControl is only supported by PMFW 54.15.0 and onwards\n"); |
| return -EINVAL; |
| } |
| |
| return smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_DFCstateControl, state, NULL); |
| } |
| |
| static int arcturus_allow_xgmi_power_down(struct smu_context *smu, bool en) |
| { |
| uint32_t smu_version; |
| int ret; |
| |
| ret = smu_cmn_get_smc_version(smu, NULL, &smu_version); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to get smu version!\n"); |
| return ret; |
| } |
| |
| /* PPSMC_MSG_GmiPwrDnControl is supported by 54.23.0 and onwards */ |
| if (smu_version < 0x00361700) { |
| dev_err(smu->adev->dev, "XGMI power down control is only supported by PMFW 54.23.0 and onwards\n"); |
| return -EINVAL; |
| } |
| |
| if (en) |
| return smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_GmiPwrDnControl, |
| 1, |
| NULL); |
| |
| return smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_GmiPwrDnControl, |
| 0, |
| NULL); |
| } |
| |
| static const struct throttling_logging_label { |
| uint32_t feature_mask; |
| const char *label; |
| } logging_label[] = { |
| {(1U << THROTTLER_TEMP_HOTSPOT_BIT), "GPU"}, |
| {(1U << THROTTLER_TEMP_MEM_BIT), "HBM"}, |
| {(1U << THROTTLER_TEMP_VR_GFX_BIT), "VR of GFX rail"}, |
| {(1U << THROTTLER_TEMP_VR_MEM_BIT), "VR of HBM rail"}, |
| {(1U << THROTTLER_TEMP_VR_SOC_BIT), "VR of SOC rail"}, |
| {(1U << THROTTLER_VRHOT0_BIT), "VR0 HOT"}, |
| {(1U << THROTTLER_VRHOT1_BIT), "VR1 HOT"}, |
| }; |
| static void arcturus_log_thermal_throttling_event(struct smu_context *smu) |
| { |
| int ret; |
| int throttler_idx, throtting_events = 0, buf_idx = 0; |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t throttler_status; |
| char log_buf[256]; |
| |
| ret = arcturus_get_smu_metrics_data(smu, |
| METRICS_THROTTLER_STATUS, |
| &throttler_status); |
| if (ret) |
| return; |
| |
| memset(log_buf, 0, sizeof(log_buf)); |
| for (throttler_idx = 0; throttler_idx < ARRAY_SIZE(logging_label); |
| throttler_idx++) { |
| if (throttler_status & logging_label[throttler_idx].feature_mask) { |
| throtting_events++; |
| buf_idx += snprintf(log_buf + buf_idx, |
| sizeof(log_buf) - buf_idx, |
| "%s%s", |
| throtting_events > 1 ? " and " : "", |
| logging_label[throttler_idx].label); |
| if (buf_idx >= sizeof(log_buf)) { |
| dev_err(adev->dev, "buffer overflow!\n"); |
| log_buf[sizeof(log_buf) - 1] = '\0'; |
| break; |
| } |
| } |
| } |
| |
| dev_warn(adev->dev, "WARN: GPU thermal throttling temperature reached, expect performance decrease. %s.\n", |
| log_buf); |
| kgd2kfd_smi_event_throttle(smu->adev->kfd.dev, throttler_status); |
| } |
| |
| static int arcturus_get_current_pcie_link_speed(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t esm_ctrl; |
| |
| /* TODO: confirm this on real target */ |
| esm_ctrl = RREG32_PCIE(smnPCIE_ESM_CTRL); |
| if ((esm_ctrl >> 15) & 0x1FFFF) |
| return (((esm_ctrl >> 8) & 0x3F) + 128); |
| |
| return smu_v11_0_get_current_pcie_link_speed(smu); |
| } |
| |
| static ssize_t arcturus_get_gpu_metrics(struct smu_context *smu, |
| void **table) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct gpu_metrics_v1_0 *gpu_metrics = |
| (struct gpu_metrics_v1_0 *)smu_table->gpu_metrics_table; |
| SmuMetrics_t metrics; |
| int ret = 0; |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| &metrics, |
| true); |
| if (ret) |
| return ret; |
| |
| smu_v11_0_init_gpu_metrics_v1_0(gpu_metrics); |
| |
| gpu_metrics->temperature_edge = metrics.TemperatureEdge; |
| gpu_metrics->temperature_hotspot = metrics.TemperatureHotspot; |
| gpu_metrics->temperature_mem = metrics.TemperatureHBM; |
| gpu_metrics->temperature_vrgfx = metrics.TemperatureVrGfx; |
| gpu_metrics->temperature_vrsoc = metrics.TemperatureVrSoc; |
| gpu_metrics->temperature_vrmem = metrics.TemperatureVrMem; |
| |
| gpu_metrics->average_gfx_activity = metrics.AverageGfxActivity; |
| gpu_metrics->average_umc_activity = metrics.AverageUclkActivity; |
| gpu_metrics->average_mm_activity = metrics.VcnActivityPercentage; |
| |
| gpu_metrics->average_socket_power = metrics.AverageSocketPower; |
| gpu_metrics->energy_accumulator = metrics.EnergyAccumulator; |
| |
| gpu_metrics->average_gfxclk_frequency = metrics.AverageGfxclkFrequency; |
| gpu_metrics->average_socclk_frequency = metrics.AverageSocclkFrequency; |
| gpu_metrics->average_uclk_frequency = metrics.AverageUclkFrequency; |
| gpu_metrics->average_vclk0_frequency = metrics.AverageVclkFrequency; |
| gpu_metrics->average_dclk0_frequency = metrics.AverageDclkFrequency; |
| |
| gpu_metrics->current_gfxclk = metrics.CurrClock[PPCLK_GFXCLK]; |
| gpu_metrics->current_socclk = metrics.CurrClock[PPCLK_SOCCLK]; |
| gpu_metrics->current_uclk = metrics.CurrClock[PPCLK_UCLK]; |
| gpu_metrics->current_vclk0 = metrics.CurrClock[PPCLK_VCLK]; |
| gpu_metrics->current_dclk0 = metrics.CurrClock[PPCLK_DCLK]; |
| |
| gpu_metrics->throttle_status = metrics.ThrottlerStatus; |
| |
| gpu_metrics->current_fan_speed = metrics.CurrFanSpeed; |
| |
| gpu_metrics->pcie_link_width = |
| smu_v11_0_get_current_pcie_link_width(smu); |
| gpu_metrics->pcie_link_speed = |
| arcturus_get_current_pcie_link_speed(smu); |
| |
| *table = (void *)gpu_metrics; |
| |
| return sizeof(struct gpu_metrics_v1_0); |
| } |
| |
| static const struct pptable_funcs arcturus_ppt_funcs = { |
| /* init dpm */ |
| .get_allowed_feature_mask = arcturus_get_allowed_feature_mask, |
| /* btc */ |
| .run_btc = arcturus_run_btc, |
| /* dpm/clk tables */ |
| .set_default_dpm_table = arcturus_set_default_dpm_table, |
| .populate_umd_state_clk = arcturus_populate_umd_state_clk, |
| .get_thermal_temperature_range = arcturus_get_thermal_temperature_range, |
| .print_clk_levels = arcturus_print_clk_levels, |
| .force_clk_levels = arcturus_force_clk_levels, |
| .read_sensor = arcturus_read_sensor, |
| .get_fan_speed_rpm = arcturus_get_fan_speed_rpm, |
| .get_power_profile_mode = arcturus_get_power_profile_mode, |
| .set_power_profile_mode = arcturus_set_power_profile_mode, |
| .set_performance_level = arcturus_set_performance_level, |
| /* debug (internal used) */ |
| .dump_pptable = arcturus_dump_pptable, |
| .get_power_limit = arcturus_get_power_limit, |
| .is_dpm_running = arcturus_is_dpm_running, |
| .dpm_set_vcn_enable = arcturus_dpm_set_vcn_enable, |
| .i2c_init = arcturus_i2c_control_init, |
| .i2c_fini = arcturus_i2c_control_fini, |
| .get_unique_id = arcturus_get_unique_id, |
| .init_microcode = smu_v11_0_init_microcode, |
| .load_microcode = smu_v11_0_load_microcode, |
| .fini_microcode = smu_v11_0_fini_microcode, |
| .init_smc_tables = arcturus_init_smc_tables, |
| .fini_smc_tables = smu_v11_0_fini_smc_tables, |
| .init_power = smu_v11_0_init_power, |
| .fini_power = smu_v11_0_fini_power, |
| .check_fw_status = smu_v11_0_check_fw_status, |
| /* pptable related */ |
| .setup_pptable = arcturus_setup_pptable, |
| .get_vbios_bootup_values = smu_v11_0_get_vbios_bootup_values, |
| .check_fw_version = smu_v11_0_check_fw_version, |
| .write_pptable = smu_cmn_write_pptable, |
| .set_driver_table_location = smu_v11_0_set_driver_table_location, |
| .set_tool_table_location = smu_v11_0_set_tool_table_location, |
| .notify_memory_pool_location = smu_v11_0_notify_memory_pool_location, |
| .system_features_control = smu_v11_0_system_features_control, |
| .send_smc_msg_with_param = smu_cmn_send_smc_msg_with_param, |
| .send_smc_msg = smu_cmn_send_smc_msg, |
| .init_display_count = NULL, |
| .set_allowed_mask = smu_v11_0_set_allowed_mask, |
| .get_enabled_mask = smu_cmn_get_enabled_mask, |
| .feature_is_enabled = smu_cmn_feature_is_enabled, |
| .disable_all_features_with_exception = smu_cmn_disable_all_features_with_exception, |
| .notify_display_change = NULL, |
| .set_power_limit = smu_v11_0_set_power_limit, |
| .init_max_sustainable_clocks = smu_v11_0_init_max_sustainable_clocks, |
| .enable_thermal_alert = smu_v11_0_enable_thermal_alert, |
| .disable_thermal_alert = smu_v11_0_disable_thermal_alert, |
| .set_min_dcef_deep_sleep = NULL, |
| .display_clock_voltage_request = smu_v11_0_display_clock_voltage_request, |
| .get_fan_control_mode = smu_v11_0_get_fan_control_mode, |
| .set_fan_control_mode = smu_v11_0_set_fan_control_mode, |
| .set_fan_speed_rpm = smu_v11_0_set_fan_speed_rpm, |
| .set_xgmi_pstate = smu_v11_0_set_xgmi_pstate, |
| .gfx_off_control = smu_v11_0_gfx_off_control, |
| .register_irq_handler = smu_v11_0_register_irq_handler, |
| .set_azalia_d3_pme = smu_v11_0_set_azalia_d3_pme, |
| .get_max_sustainable_clocks_by_dc = smu_v11_0_get_max_sustainable_clocks_by_dc, |
| .baco_is_support= arcturus_is_baco_supported, |
| .baco_get_state = smu_v11_0_baco_get_state, |
| .baco_set_state = smu_v11_0_baco_set_state, |
| .baco_enter = smu_v11_0_baco_enter, |
| .baco_exit = smu_v11_0_baco_exit, |
| .get_dpm_ultimate_freq = smu_v11_0_get_dpm_ultimate_freq, |
| .set_soft_freq_limited_range = smu_v11_0_set_soft_freq_limited_range, |
| .set_df_cstate = arcturus_set_df_cstate, |
| .allow_xgmi_power_down = arcturus_allow_xgmi_power_down, |
| .log_thermal_throttling_event = arcturus_log_thermal_throttling_event, |
| .get_pp_feature_mask = smu_cmn_get_pp_feature_mask, |
| .set_pp_feature_mask = smu_cmn_set_pp_feature_mask, |
| .get_gpu_metrics = arcturus_get_gpu_metrics, |
| .gfx_ulv_control = smu_v11_0_gfx_ulv_control, |
| .deep_sleep_control = smu_v11_0_deep_sleep_control, |
| .get_fan_parameters = arcturus_get_fan_parameters, |
| .interrupt_work = smu_v11_0_interrupt_work, |
| }; |
| |
| void arcturus_set_ppt_funcs(struct smu_context *smu) |
| { |
| smu->ppt_funcs = &arcturus_ppt_funcs; |
| smu->message_map = arcturus_message_map; |
| smu->clock_map = arcturus_clk_map; |
| smu->feature_map = arcturus_feature_mask_map; |
| smu->table_map = arcturus_table_map; |
| smu->pwr_src_map = arcturus_pwr_src_map; |
| smu->workload_map = arcturus_workload_map; |
| } |