| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * platform.c - DesignWare HS OTG Controller platform driver |
| * |
| * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The names of the above-listed copyright holders may not be used |
| * to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation; either version 2 of the License, or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS |
| * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/of_device.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_device.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_data/s3c-hsotg.h> |
| #include <linux/reset.h> |
| |
| #include <linux/usb/of.h> |
| |
| #include "core.h" |
| #include "hcd.h" |
| #include "debug.h" |
| |
| static const char dwc2_driver_name[] = "dwc2"; |
| |
| /* |
| * Check the dr_mode against the module configuration and hardware |
| * capabilities. |
| * |
| * The hardware, module, and dr_mode, can each be set to host, device, |
| * or otg. Check that all these values are compatible and adjust the |
| * value of dr_mode if possible. |
| * |
| * actual |
| * HW MOD dr_mode dr_mode |
| * ------------------------------ |
| * HST HST any : HST |
| * HST DEV any : --- |
| * HST OTG any : HST |
| * |
| * DEV HST any : --- |
| * DEV DEV any : DEV |
| * DEV OTG any : DEV |
| * |
| * OTG HST any : HST |
| * OTG DEV any : DEV |
| * OTG OTG any : dr_mode |
| */ |
| static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg) |
| { |
| enum usb_dr_mode mode; |
| |
| hsotg->dr_mode = usb_get_dr_mode(hsotg->dev); |
| if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN) |
| hsotg->dr_mode = USB_DR_MODE_OTG; |
| |
| mode = hsotg->dr_mode; |
| |
| if (dwc2_hw_is_device(hsotg)) { |
| if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) { |
| dev_err(hsotg->dev, |
| "Controller does not support host mode.\n"); |
| return -EINVAL; |
| } |
| mode = USB_DR_MODE_PERIPHERAL; |
| } else if (dwc2_hw_is_host(hsotg)) { |
| if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) { |
| dev_err(hsotg->dev, |
| "Controller does not support device mode.\n"); |
| return -EINVAL; |
| } |
| mode = USB_DR_MODE_HOST; |
| } else { |
| if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) |
| mode = USB_DR_MODE_HOST; |
| else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) |
| mode = USB_DR_MODE_PERIPHERAL; |
| } |
| |
| if (mode != hsotg->dr_mode) { |
| dev_warn(hsotg->dev, |
| "Configuration mismatch. dr_mode forced to %s\n", |
| mode == USB_DR_MODE_HOST ? "host" : "device"); |
| |
| hsotg->dr_mode = mode; |
| } |
| |
| return 0; |
| } |
| |
| static void __dwc2_disable_regulators(void *data) |
| { |
| struct dwc2_hsotg *hsotg = data; |
| |
| regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); |
| } |
| |
| static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) |
| { |
| struct platform_device *pdev = to_platform_device(hsotg->dev); |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), |
| hsotg->supplies); |
| if (ret) |
| return ret; |
| |
| ret = devm_add_action_or_reset(&pdev->dev, |
| __dwc2_disable_regulators, hsotg); |
| if (ret) |
| return ret; |
| |
| if (hsotg->clk) { |
| ret = clk_prepare_enable(hsotg->clk); |
| if (ret) |
| return ret; |
| } |
| |
| if (hsotg->uphy) { |
| ret = usb_phy_init(hsotg->uphy); |
| } else if (hsotg->plat && hsotg->plat->phy_init) { |
| ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); |
| } else { |
| ret = phy_power_on(hsotg->phy); |
| if (ret == 0) |
| ret = phy_init(hsotg->phy); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources |
| * @hsotg: The driver state |
| * |
| * A wrapper for platform code responsible for controlling |
| * low-level USB platform resources (phy, clock, regulators) |
| */ |
| int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) |
| { |
| int ret = __dwc2_lowlevel_hw_enable(hsotg); |
| |
| if (ret == 0) |
| hsotg->ll_hw_enabled = true; |
| return ret; |
| } |
| |
| static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) |
| { |
| struct platform_device *pdev = to_platform_device(hsotg->dev); |
| int ret = 0; |
| |
| if (hsotg->uphy) { |
| usb_phy_shutdown(hsotg->uphy); |
| } else if (hsotg->plat && hsotg->plat->phy_exit) { |
| ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); |
| } else { |
| ret = phy_exit(hsotg->phy); |
| if (ret == 0) |
| ret = phy_power_off(hsotg->phy); |
| } |
| if (ret) |
| return ret; |
| |
| if (hsotg->clk) |
| clk_disable_unprepare(hsotg->clk); |
| |
| return 0; |
| } |
| |
| /** |
| * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources |
| * @hsotg: The driver state |
| * |
| * A wrapper for platform code responsible for controlling |
| * low-level USB platform resources (phy, clock, regulators) |
| */ |
| int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) |
| { |
| int ret = __dwc2_lowlevel_hw_disable(hsotg); |
| |
| if (ret == 0) |
| hsotg->ll_hw_enabled = false; |
| return ret; |
| } |
| |
| static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) |
| { |
| int i, ret; |
| |
| hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2"); |
| if (IS_ERR(hsotg->reset)) { |
| ret = PTR_ERR(hsotg->reset); |
| dev_err(hsotg->dev, "error getting reset control %d\n", ret); |
| return ret; |
| } |
| |
| reset_control_deassert(hsotg->reset); |
| |
| hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc"); |
| if (IS_ERR(hsotg->reset_ecc)) { |
| ret = PTR_ERR(hsotg->reset_ecc); |
| dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret); |
| return ret; |
| } |
| |
| reset_control_deassert(hsotg->reset_ecc); |
| |
| /* |
| * Attempt to find a generic PHY, then look for an old style |
| * USB PHY and then fall back to pdata |
| */ |
| hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy"); |
| if (IS_ERR(hsotg->phy)) { |
| ret = PTR_ERR(hsotg->phy); |
| switch (ret) { |
| case -ENODEV: |
| case -ENOSYS: |
| hsotg->phy = NULL; |
| break; |
| case -EPROBE_DEFER: |
| return ret; |
| default: |
| dev_err(hsotg->dev, "error getting phy %d\n", ret); |
| return ret; |
| } |
| } |
| |
| if (!hsotg->phy) { |
| hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2); |
| if (IS_ERR(hsotg->uphy)) { |
| ret = PTR_ERR(hsotg->uphy); |
| switch (ret) { |
| case -ENODEV: |
| case -ENXIO: |
| hsotg->uphy = NULL; |
| break; |
| case -EPROBE_DEFER: |
| return ret; |
| default: |
| dev_err(hsotg->dev, "error getting usb phy %d\n", |
| ret); |
| return ret; |
| } |
| } |
| } |
| |
| hsotg->plat = dev_get_platdata(hsotg->dev); |
| |
| /* Clock */ |
| hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg"); |
| if (IS_ERR(hsotg->clk)) { |
| dev_err(hsotg->dev, "cannot get otg clock\n"); |
| return PTR_ERR(hsotg->clk); |
| } |
| |
| /* Regulators */ |
| for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) |
| hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i]; |
| |
| ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies), |
| hsotg->supplies); |
| if (ret) { |
| if (ret != -EPROBE_DEFER) |
| dev_err(hsotg->dev, "failed to request supplies: %d\n", |
| ret); |
| return ret; |
| } |
| return 0; |
| } |
| |
| /** |
| * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the |
| * DWC_otg driver |
| * |
| * @dev: Platform device |
| * |
| * This routine is called, for example, when the rmmod command is executed. The |
| * device may or may not be electrically present. If it is present, the driver |
| * stops device processing. Any resources used on behalf of this device are |
| * freed. |
| */ |
| static int dwc2_driver_remove(struct platform_device *dev) |
| { |
| struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); |
| |
| dwc2_debugfs_exit(hsotg); |
| if (hsotg->hcd_enabled) |
| dwc2_hcd_remove(hsotg); |
| if (hsotg->gadget_enabled) |
| dwc2_hsotg_remove(hsotg); |
| |
| dwc2_drd_exit(hsotg); |
| |
| if (hsotg->params.activate_stm_id_vb_detection) |
| regulator_disable(hsotg->usb33d); |
| |
| if (hsotg->ll_hw_enabled) |
| dwc2_lowlevel_hw_disable(hsotg); |
| |
| reset_control_assert(hsotg->reset); |
| reset_control_assert(hsotg->reset_ecc); |
| |
| return 0; |
| } |
| |
| /** |
| * dwc2_driver_shutdown() - Called on device shutdown |
| * |
| * @dev: Platform device |
| * |
| * In specific conditions (involving usb hubs) dwc2 devices can create a |
| * lot of interrupts, even to the point of overwhelming devices running |
| * at low frequencies. Some devices need to do special clock handling |
| * at shutdown-time which may bring the system clock below the threshold |
| * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs |
| * prevents reboots/poweroffs from getting stuck in such cases. |
| */ |
| static void dwc2_driver_shutdown(struct platform_device *dev) |
| { |
| struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); |
| |
| dwc2_disable_global_interrupts(hsotg); |
| synchronize_irq(hsotg->irq); |
| } |
| |
| /** |
| * dwc2_check_core_endianness() - Returns true if core and AHB have |
| * opposite endianness. |
| * @hsotg: Programming view of the DWC_otg controller. |
| */ |
| static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg) |
| { |
| u32 snpsid; |
| |
| snpsid = ioread32(hsotg->regs + GSNPSID); |
| if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID || |
| (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID || |
| (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID) |
| return false; |
| return true; |
| } |
| |
| /** |
| * Check core version |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| * |
| */ |
| int dwc2_check_core_version(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_hw_params *hw = &hsotg->hw_params; |
| |
| /* |
| * Attempt to ensure this device is really a DWC_otg Controller. |
| * Read and verify the GSNPSID register contents. The value should be |
| * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx |
| */ |
| |
| hw->snpsid = dwc2_readl(hsotg, GSNPSID); |
| if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID && |
| (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID && |
| (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) { |
| dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n", |
| hw->snpsid); |
| return -ENODEV; |
| } |
| |
| dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n", |
| hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, |
| hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); |
| return 0; |
| } |
| |
| /** |
| * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg |
| * driver |
| * |
| * @dev: Platform device |
| * |
| * This routine creates the driver components required to control the device |
| * (core, HCD, and PCD) and initializes the device. The driver components are |
| * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved |
| * in the device private data. This allows the driver to access the dwc2_hsotg |
| * structure on subsequent calls to driver methods for this device. |
| */ |
| static int dwc2_driver_probe(struct platform_device *dev) |
| { |
| struct dwc2_hsotg *hsotg; |
| struct resource *res; |
| int retval; |
| |
| hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); |
| if (!hsotg) |
| return -ENOMEM; |
| |
| hsotg->dev = &dev->dev; |
| |
| /* |
| * Use reasonable defaults so platforms don't have to provide these. |
| */ |
| if (!dev->dev.dma_mask) |
| dev->dev.dma_mask = &dev->dev.coherent_dma_mask; |
| retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); |
| if (retval) { |
| dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval); |
| return retval; |
| } |
| |
| hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res); |
| if (IS_ERR(hsotg->regs)) |
| return PTR_ERR(hsotg->regs); |
| |
| dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", |
| (unsigned long)res->start, hsotg->regs); |
| |
| retval = dwc2_lowlevel_hw_init(hsotg); |
| if (retval) |
| return retval; |
| |
| spin_lock_init(&hsotg->lock); |
| |
| hsotg->irq = platform_get_irq(dev, 0); |
| if (hsotg->irq < 0) |
| return hsotg->irq; |
| |
| dev_dbg(hsotg->dev, "registering common handler for irq%d\n", |
| hsotg->irq); |
| retval = devm_request_irq(hsotg->dev, hsotg->irq, |
| dwc2_handle_common_intr, IRQF_SHARED, |
| dev_name(hsotg->dev), hsotg); |
| if (retval) |
| return retval; |
| |
| hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus"); |
| if (IS_ERR(hsotg->vbus_supply)) { |
| retval = PTR_ERR(hsotg->vbus_supply); |
| hsotg->vbus_supply = NULL; |
| if (retval != -ENODEV) |
| return retval; |
| } |
| |
| retval = dwc2_lowlevel_hw_enable(hsotg); |
| if (retval) |
| return retval; |
| |
| hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg); |
| |
| retval = dwc2_get_dr_mode(hsotg); |
| if (retval) |
| goto error; |
| |
| hsotg->need_phy_for_wake = |
| of_property_read_bool(dev->dev.of_node, |
| "snps,need-phy-for-wake"); |
| |
| /* |
| * Before performing any core related operations |
| * check core version. |
| */ |
| retval = dwc2_check_core_version(hsotg); |
| if (retval) |
| goto error; |
| |
| /* |
| * Reset before dwc2_get_hwparams() then it could get power-on real |
| * reset value form registers. |
| */ |
| retval = dwc2_core_reset(hsotg, false); |
| if (retval) |
| goto error; |
| |
| /* Detect config values from hardware */ |
| retval = dwc2_get_hwparams(hsotg); |
| if (retval) |
| goto error; |
| |
| /* |
| * For OTG cores, set the force mode bits to reflect the value |
| * of dr_mode. Force mode bits should not be touched at any |
| * other time after this. |
| */ |
| dwc2_force_dr_mode(hsotg); |
| |
| retval = dwc2_init_params(hsotg); |
| if (retval) |
| goto error; |
| |
| if (hsotg->params.activate_stm_id_vb_detection) { |
| u32 ggpio; |
| |
| hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d"); |
| if (IS_ERR(hsotg->usb33d)) { |
| retval = PTR_ERR(hsotg->usb33d); |
| if (retval != -EPROBE_DEFER) |
| dev_err(hsotg->dev, |
| "failed to request usb33d supply: %d\n", |
| retval); |
| goto error; |
| } |
| retval = regulator_enable(hsotg->usb33d); |
| if (retval) { |
| dev_err(hsotg->dev, |
| "failed to enable usb33d supply: %d\n", retval); |
| goto error; |
| } |
| |
| ggpio = dwc2_readl(hsotg, GGPIO); |
| ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN; |
| ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN; |
| dwc2_writel(hsotg, ggpio, GGPIO); |
| } |
| |
| retval = dwc2_drd_init(hsotg); |
| if (retval) { |
| if (retval != -EPROBE_DEFER) |
| dev_err(hsotg->dev, "failed to initialize dual-role\n"); |
| goto error_init; |
| } |
| |
| if (hsotg->dr_mode != USB_DR_MODE_HOST) { |
| retval = dwc2_gadget_init(hsotg); |
| if (retval) |
| goto error_drd; |
| hsotg->gadget_enabled = 1; |
| } |
| |
| /* |
| * If we need PHY for wakeup we must be wakeup capable. |
| * When we have a device that can wake without the PHY we |
| * can adjust this condition. |
| */ |
| if (hsotg->need_phy_for_wake) |
| device_set_wakeup_capable(&dev->dev, true); |
| |
| hsotg->reset_phy_on_wake = |
| of_property_read_bool(dev->dev.of_node, |
| "snps,reset-phy-on-wake"); |
| if (hsotg->reset_phy_on_wake && !hsotg->phy) { |
| dev_warn(hsotg->dev, |
| "Quirk reset-phy-on-wake only supports generic PHYs\n"); |
| hsotg->reset_phy_on_wake = false; |
| } |
| |
| if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { |
| retval = dwc2_hcd_init(hsotg); |
| if (retval) { |
| if (hsotg->gadget_enabled) |
| dwc2_hsotg_remove(hsotg); |
| goto error_drd; |
| } |
| hsotg->hcd_enabled = 1; |
| } |
| |
| platform_set_drvdata(dev, hsotg); |
| hsotg->hibernated = 0; |
| |
| dwc2_debugfs_init(hsotg); |
| |
| /* Gadget code manages lowlevel hw on its own */ |
| if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) |
| dwc2_lowlevel_hw_disable(hsotg); |
| |
| #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ |
| IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) |
| /* Postponed adding a new gadget to the udc class driver list */ |
| if (hsotg->gadget_enabled) { |
| retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget); |
| if (retval) { |
| hsotg->gadget.udc = NULL; |
| dwc2_hsotg_remove(hsotg); |
| goto error_debugfs; |
| } |
| } |
| #endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ |
| return 0; |
| |
| #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ |
| IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) |
| error_debugfs: |
| dwc2_debugfs_exit(hsotg); |
| if (hsotg->hcd_enabled) |
| dwc2_hcd_remove(hsotg); |
| #endif |
| error_drd: |
| dwc2_drd_exit(hsotg); |
| |
| error_init: |
| if (hsotg->params.activate_stm_id_vb_detection) |
| regulator_disable(hsotg->usb33d); |
| error: |
| if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) |
| dwc2_lowlevel_hw_disable(hsotg); |
| return retval; |
| } |
| |
| static int __maybe_unused dwc2_suspend(struct device *dev) |
| { |
| struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); |
| bool is_device_mode = dwc2_is_device_mode(dwc2); |
| int ret = 0; |
| |
| if (is_device_mode) |
| dwc2_hsotg_suspend(dwc2); |
| |
| dwc2_drd_suspend(dwc2); |
| |
| if (dwc2->params.activate_stm_id_vb_detection) { |
| unsigned long flags; |
| u32 ggpio, gotgctl; |
| |
| /* |
| * Need to force the mode to the current mode to avoid Mode |
| * Mismatch Interrupt when ID detection will be disabled. |
| */ |
| dwc2_force_mode(dwc2, !is_device_mode); |
| |
| spin_lock_irqsave(&dwc2->lock, flags); |
| gotgctl = dwc2_readl(dwc2, GOTGCTL); |
| /* bypass debounce filter, enable overrides */ |
| gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS; |
| gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN; |
| /* Force A / B session if needed */ |
| if (gotgctl & GOTGCTL_ASESVLD) |
| gotgctl |= GOTGCTL_AVALOVAL; |
| if (gotgctl & GOTGCTL_BSESVLD) |
| gotgctl |= GOTGCTL_BVALOVAL; |
| dwc2_writel(dwc2, gotgctl, GOTGCTL); |
| spin_unlock_irqrestore(&dwc2->lock, flags); |
| |
| ggpio = dwc2_readl(dwc2, GGPIO); |
| ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN; |
| ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN; |
| dwc2_writel(dwc2, ggpio, GGPIO); |
| |
| regulator_disable(dwc2->usb33d); |
| } |
| |
| if (dwc2->ll_hw_enabled && |
| (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) { |
| ret = __dwc2_lowlevel_hw_disable(dwc2); |
| dwc2->phy_off_for_suspend = true; |
| } |
| |
| return ret; |
| } |
| |
| static int __maybe_unused dwc2_resume(struct device *dev) |
| { |
| struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) { |
| ret = __dwc2_lowlevel_hw_enable(dwc2); |
| if (ret) |
| return ret; |
| } |
| dwc2->phy_off_for_suspend = false; |
| |
| if (dwc2->params.activate_stm_id_vb_detection) { |
| unsigned long flags; |
| u32 ggpio, gotgctl; |
| |
| ret = regulator_enable(dwc2->usb33d); |
| if (ret) |
| return ret; |
| |
| ggpio = dwc2_readl(dwc2, GGPIO); |
| ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN; |
| ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN; |
| dwc2_writel(dwc2, ggpio, GGPIO); |
| |
| /* ID/VBUS detection startup time */ |
| usleep_range(5000, 7000); |
| |
| spin_lock_irqsave(&dwc2->lock, flags); |
| gotgctl = dwc2_readl(dwc2, GOTGCTL); |
| gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS; |
| gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | |
| GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL); |
| dwc2_writel(dwc2, gotgctl, GOTGCTL); |
| spin_unlock_irqrestore(&dwc2->lock, flags); |
| } |
| |
| /* Need to restore FORCEDEVMODE/FORCEHOSTMODE */ |
| dwc2_force_dr_mode(dwc2); |
| |
| dwc2_drd_resume(dwc2); |
| |
| if (dwc2_is_device_mode(dwc2)) |
| ret = dwc2_hsotg_resume(dwc2); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops dwc2_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume) |
| }; |
| |
| static struct platform_driver dwc2_platform_driver = { |
| .driver = { |
| .name = dwc2_driver_name, |
| .of_match_table = dwc2_of_match_table, |
| .pm = &dwc2_dev_pm_ops, |
| }, |
| .probe = dwc2_driver_probe, |
| .remove = dwc2_driver_remove, |
| .shutdown = dwc2_driver_shutdown, |
| }; |
| |
| module_platform_driver(dwc2_platform_driver); |
| |
| MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue"); |
| MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>"); |
| MODULE_LICENSE("Dual BSD/GPL"); |