| /* SPDX-License-Identifier: LGPL-2.1 */ |
| #ifndef _COMMON_SMB2PDU_H |
| #define _COMMON_SMB2PDU_H |
| |
| /* |
| * Note that, due to trying to use names similar to the protocol specifications, |
| * there are many mixed case field names in the structures below. Although |
| * this does not match typical Linux kernel style, it is necessary to be |
| * able to match against the protocol specfication. |
| * |
| * SMB2 commands |
| * Some commands have minimal (wct=0,bcc=0), or uninteresting, responses |
| * (ie no useful data other than the SMB error code itself) and are marked such. |
| * Knowing this helps avoid response buffer allocations and copy in some cases. |
| */ |
| |
| /* List of commands in host endian */ |
| #define SMB2_NEGOTIATE_HE 0x0000 |
| #define SMB2_SESSION_SETUP_HE 0x0001 |
| #define SMB2_LOGOFF_HE 0x0002 /* trivial request/resp */ |
| #define SMB2_TREE_CONNECT_HE 0x0003 |
| #define SMB2_TREE_DISCONNECT_HE 0x0004 /* trivial req/resp */ |
| #define SMB2_CREATE_HE 0x0005 |
| #define SMB2_CLOSE_HE 0x0006 |
| #define SMB2_FLUSH_HE 0x0007 /* trivial resp */ |
| #define SMB2_READ_HE 0x0008 |
| #define SMB2_WRITE_HE 0x0009 |
| #define SMB2_LOCK_HE 0x000A |
| #define SMB2_IOCTL_HE 0x000B |
| #define SMB2_CANCEL_HE 0x000C |
| #define SMB2_ECHO_HE 0x000D |
| #define SMB2_QUERY_DIRECTORY_HE 0x000E |
| #define SMB2_CHANGE_NOTIFY_HE 0x000F |
| #define SMB2_QUERY_INFO_HE 0x0010 |
| #define SMB2_SET_INFO_HE 0x0011 |
| #define SMB2_OPLOCK_BREAK_HE 0x0012 |
| |
| /* The same list in little endian */ |
| #define SMB2_NEGOTIATE cpu_to_le16(SMB2_NEGOTIATE_HE) |
| #define SMB2_SESSION_SETUP cpu_to_le16(SMB2_SESSION_SETUP_HE) |
| #define SMB2_LOGOFF cpu_to_le16(SMB2_LOGOFF_HE) |
| #define SMB2_TREE_CONNECT cpu_to_le16(SMB2_TREE_CONNECT_HE) |
| #define SMB2_TREE_DISCONNECT cpu_to_le16(SMB2_TREE_DISCONNECT_HE) |
| #define SMB2_CREATE cpu_to_le16(SMB2_CREATE_HE) |
| #define SMB2_CLOSE cpu_to_le16(SMB2_CLOSE_HE) |
| #define SMB2_FLUSH cpu_to_le16(SMB2_FLUSH_HE) |
| #define SMB2_READ cpu_to_le16(SMB2_READ_HE) |
| #define SMB2_WRITE cpu_to_le16(SMB2_WRITE_HE) |
| #define SMB2_LOCK cpu_to_le16(SMB2_LOCK_HE) |
| #define SMB2_IOCTL cpu_to_le16(SMB2_IOCTL_HE) |
| #define SMB2_CANCEL cpu_to_le16(SMB2_CANCEL_HE) |
| #define SMB2_ECHO cpu_to_le16(SMB2_ECHO_HE) |
| #define SMB2_QUERY_DIRECTORY cpu_to_le16(SMB2_QUERY_DIRECTORY_HE) |
| #define SMB2_CHANGE_NOTIFY cpu_to_le16(SMB2_CHANGE_NOTIFY_HE) |
| #define SMB2_QUERY_INFO cpu_to_le16(SMB2_QUERY_INFO_HE) |
| #define SMB2_SET_INFO cpu_to_le16(SMB2_SET_INFO_HE) |
| #define SMB2_OPLOCK_BREAK cpu_to_le16(SMB2_OPLOCK_BREAK_HE) |
| |
| #define SMB2_INTERNAL_CMD cpu_to_le16(0xFFFF) |
| |
| #define NUMBER_OF_SMB2_COMMANDS 0x0013 |
| |
| /* |
| * Size of the session key (crypto key encrypted with the password |
| */ |
| #define SMB2_NTLMV2_SESSKEY_SIZE 16 |
| #define SMB2_SIGNATURE_SIZE 16 |
| #define SMB2_HMACSHA256_SIZE 32 |
| #define SMB2_CMACAES_SIZE 16 |
| #define SMB3_GCM128_CRYPTKEY_SIZE 16 |
| #define SMB3_GCM256_CRYPTKEY_SIZE 32 |
| |
| /* |
| * Size of the smb3 encryption/decryption keys |
| * This size is big enough to store any cipher key types. |
| */ |
| #define SMB3_ENC_DEC_KEY_SIZE 32 |
| |
| /* |
| * Size of the smb3 signing key |
| */ |
| #define SMB3_SIGN_KEY_SIZE 16 |
| |
| #define CIFS_CLIENT_CHALLENGE_SIZE 8 |
| |
| /* Maximum buffer size value we can send with 1 credit */ |
| #define SMB2_MAX_BUFFER_SIZE 65536 |
| |
| /* |
| * The default wsize is 1M for SMB2 (and for some CIFS cases). |
| * find_get_pages seems to return a maximum of 256 |
| * pages in a single call. With PAGE_SIZE == 4k, this means we can |
| * fill a single wsize request with a single call. |
| */ |
| #define SMB3_DEFAULT_IOSIZE (4 * 1024 * 1024) |
| |
| /* |
| * SMB2 Header Definition |
| * |
| * "MBZ" : Must be Zero |
| * "BB" : BugBug, Something to check/review/analyze later |
| * "PDU" : "Protocol Data Unit" (ie a network "frame") |
| * |
| */ |
| |
| #define __SMB2_HEADER_STRUCTURE_SIZE 64 |
| #define SMB2_HEADER_STRUCTURE_SIZE \ |
| cpu_to_le16(__SMB2_HEADER_STRUCTURE_SIZE) |
| |
| #define SMB2_PROTO_NUMBER cpu_to_le32(0x424d53fe) |
| #define SMB2_TRANSFORM_PROTO_NUM cpu_to_le32(0x424d53fd) |
| #define SMB2_COMPRESSION_TRANSFORM_ID cpu_to_le32(0x424d53fc) |
| |
| /* |
| * SMB2 flag definitions |
| */ |
| #define SMB2_FLAGS_SERVER_TO_REDIR cpu_to_le32(0x00000001) |
| #define SMB2_FLAGS_ASYNC_COMMAND cpu_to_le32(0x00000002) |
| #define SMB2_FLAGS_RELATED_OPERATIONS cpu_to_le32(0x00000004) |
| #define SMB2_FLAGS_SIGNED cpu_to_le32(0x00000008) |
| #define SMB2_FLAGS_PRIORITY_MASK cpu_to_le32(0x00000070) /* SMB3.1.1 */ |
| #define SMB2_FLAGS_DFS_OPERATIONS cpu_to_le32(0x10000000) |
| #define SMB2_FLAGS_REPLAY_OPERATION cpu_to_le32(0x20000000) /* SMB3 & up */ |
| |
| /* |
| * Definitions for SMB2 Protocol Data Units (network frames) |
| * |
| * See MS-SMB2.PDF specification for protocol details. |
| * The Naming convention is the lower case version of the SMB2 |
| * command code name for the struct. Note that structures must be packed. |
| * |
| */ |
| |
| /* See MS-SMB2 section 2.2.1 */ |
| struct smb2_hdr { |
| __le32 ProtocolId; /* 0xFE 'S' 'M' 'B' */ |
| __le16 StructureSize; /* 64 */ |
| __le16 CreditCharge; /* MBZ */ |
| __le32 Status; /* Error from server */ |
| __le16 Command; |
| __le16 CreditRequest; /* CreditResponse */ |
| __le32 Flags; |
| __le32 NextCommand; |
| __le64 MessageId; |
| union { |
| struct { |
| __le32 ProcessId; |
| __le32 TreeId; |
| } __packed SyncId; |
| __le64 AsyncId; |
| } __packed Id; |
| __le64 SessionId; |
| __u8 Signature[16]; |
| } __packed; |
| |
| struct smb2_pdu { |
| struct smb2_hdr hdr; |
| __le16 StructureSize2; /* size of wct area (varies, request specific) */ |
| } __packed; |
| |
| #define SMB2_ERROR_STRUCTURE_SIZE2 9 |
| #define SMB2_ERROR_STRUCTURE_SIZE2_LE cpu_to_le16(SMB2_ERROR_STRUCTURE_SIZE2) |
| |
| struct smb2_err_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; |
| __u8 ErrorContextCount; |
| __u8 Reserved; |
| __le32 ByteCount; /* even if zero, at least one byte follows */ |
| __u8 ErrorData[]; /* variable length */ |
| } __packed; |
| |
| #define SMB3_AES_CCM_NONCE 11 |
| #define SMB3_AES_GCM_NONCE 12 |
| |
| /* Transform flags (for 3.0 dialect this flag indicates CCM */ |
| #define TRANSFORM_FLAG_ENCRYPTED 0x0001 |
| struct smb2_transform_hdr { |
| __le32 ProtocolId; /* 0xFD 'S' 'M' 'B' */ |
| __u8 Signature[16]; |
| __u8 Nonce[16]; |
| __le32 OriginalMessageSize; |
| __u16 Reserved1; |
| __le16 Flags; /* EncryptionAlgorithm for 3.0, enc enabled for 3.1.1 */ |
| __le64 SessionId; |
| } __packed; |
| |
| |
| /* See MS-SMB2 2.2.42 */ |
| struct smb2_compression_transform_hdr_unchained { |
| __le32 ProtocolId; /* 0xFC 'S' 'M' 'B' */ |
| __le32 OriginalCompressedSegmentSize; |
| __le16 CompressionAlgorithm; |
| __le16 Flags; |
| __le16 Length; /* if chained it is length, else offset */ |
| } __packed; |
| |
| /* See MS-SMB2 2.2.42.1 */ |
| #define SMB2_COMPRESSION_FLAG_NONE 0x0000 |
| #define SMB2_COMPRESSION_FLAG_CHAINED 0x0001 |
| |
| struct compression_payload_header { |
| __le16 CompressionAlgorithm; |
| __le16 Flags; |
| __le32 Length; /* length of compressed playload including field below if present */ |
| /* __le32 OriginalPayloadSize; */ /* optional, present when LZNT1, LZ77, LZ77+Huffman */ |
| } __packed; |
| |
| /* See MS-SMB2 2.2.42.2 */ |
| struct smb2_compression_transform_hdr_chained { |
| __le32 ProtocolId; /* 0xFC 'S' 'M' 'B' */ |
| __le32 OriginalCompressedSegmentSize; |
| /* struct compression_payload_header[] */ |
| } __packed; |
| |
| /* See MS-SMB2 2.2.42.2.2 */ |
| struct compression_pattern_payload_v1 { |
| __le16 Pattern; |
| __le16 Reserved1; |
| __le16 Reserved2; |
| __le32 Repetitions; |
| } __packed; |
| |
| /* See MS-SMB2 section 2.2.9.2 */ |
| /* Context Types */ |
| #define SMB2_RESERVED_TREE_CONNECT_CONTEXT_ID 0x0000 |
| #define SMB2_REMOTED_IDENTITY_TREE_CONNECT_CONTEXT_ID cpu_to_le16(0x0001) |
| |
| struct tree_connect_contexts { |
| __le16 ContextType; |
| __le16 DataLength; |
| __le32 Reserved; |
| __u8 Data[]; |
| } __packed; |
| |
| /* Remoted identity tree connect context structures - see MS-SMB2 2.2.9.2.1 */ |
| struct smb3_blob_data { |
| __le16 BlobSize; |
| __u8 BlobData[]; |
| } __packed; |
| |
| /* Valid values for Attr */ |
| #define SE_GROUP_MANDATORY 0x00000001 |
| #define SE_GROUP_ENABLED_BY_DEFAULT 0x00000002 |
| #define SE_GROUP_ENABLED 0x00000004 |
| #define SE_GROUP_OWNER 0x00000008 |
| #define SE_GROUP_USE_FOR_DENY_ONLY 0x00000010 |
| #define SE_GROUP_INTEGRITY 0x00000020 |
| #define SE_GROUP_INTEGRITY_ENABLED 0x00000040 |
| #define SE_GROUP_RESOURCE 0x20000000 |
| #define SE_GROUP_LOGON_ID 0xC0000000 |
| |
| /* struct sid_attr_data is SidData array in BlobData format then le32 Attr */ |
| |
| struct sid_array_data { |
| __le16 SidAttrCount; |
| /* SidAttrList - array of sid_attr_data structs */ |
| } __packed; |
| |
| struct luid_attr_data { |
| |
| } __packed; |
| |
| /* |
| * struct privilege_data is the same as BLOB_DATA - see MS-SMB2 2.2.9.2.1.5 |
| * but with size of LUID_ATTR_DATA struct and BlobData set to LUID_ATTR DATA |
| */ |
| |
| struct privilege_array_data { |
| __le16 PrivilegeCount; |
| /* array of privilege_data structs */ |
| } __packed; |
| |
| struct remoted_identity_tcon_context { |
| __le16 TicketType; /* must be 0x0001 */ |
| __le16 TicketSize; /* total size of this struct */ |
| __le16 User; /* offset to SID_ATTR_DATA struct with user info */ |
| __le16 UserName; /* offset to null terminated Unicode username string */ |
| __le16 Domain; /* offset to null terminated Unicode domain name */ |
| __le16 Groups; /* offset to SID_ARRAY_DATA struct with group info */ |
| __le16 RestrictedGroups; /* similar to above */ |
| __le16 Privileges; /* offset to PRIVILEGE_ARRAY_DATA struct */ |
| __le16 PrimaryGroup; /* offset to SID_ARRAY_DATA struct */ |
| __le16 Owner; /* offset to BLOB_DATA struct */ |
| __le16 DefaultDacl; /* offset to BLOB_DATA struct */ |
| __le16 DeviceGroups; /* offset to SID_ARRAY_DATA struct */ |
| __le16 UserClaims; /* offset to BLOB_DATA struct */ |
| __le16 DeviceClaims; /* offset to BLOB_DATA struct */ |
| __u8 TicketInfo[]; /* variable length buf - remoted identity data */ |
| } __packed; |
| |
| struct smb2_tree_connect_req_extension { |
| __le32 TreeConnectContextOffset; |
| __le16 TreeConnectContextCount; |
| __u8 Reserved[10]; |
| __u8 PathName[]; /* variable sized array */ |
| /* followed by array of TreeConnectContexts */ |
| } __packed; |
| |
| /* Flags/Reserved for SMB3.1.1 */ |
| #define SMB2_TREE_CONNECT_FLAG_CLUSTER_RECONNECT cpu_to_le16(0x0001) |
| #define SMB2_TREE_CONNECT_FLAG_REDIRECT_TO_OWNER cpu_to_le16(0x0002) |
| #define SMB2_TREE_CONNECT_FLAG_EXTENSION_PRESENT cpu_to_le16(0x0004) |
| |
| struct smb2_tree_connect_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 9 */ |
| __le16 Flags; /* Flags in SMB3.1.1 */ |
| __le16 PathOffset; |
| __le16 PathLength; |
| __u8 Buffer[]; /* variable length */ |
| } __packed; |
| |
| /* Possible ShareType values */ |
| #define SMB2_SHARE_TYPE_DISK 0x01 |
| #define SMB2_SHARE_TYPE_PIPE 0x02 |
| #define SMB2_SHARE_TYPE_PRINT 0x03 |
| |
| /* |
| * Possible ShareFlags - exactly one and only one of the first 4 caching flags |
| * must be set (any of the remaining, SHI1005, flags may be set individually |
| * or in combination. |
| */ |
| #define SMB2_SHAREFLAG_MANUAL_CACHING 0x00000000 |
| #define SMB2_SHAREFLAG_AUTO_CACHING 0x00000010 |
| #define SMB2_SHAREFLAG_VDO_CACHING 0x00000020 |
| #define SMB2_SHAREFLAG_NO_CACHING 0x00000030 |
| #define SHI1005_FLAGS_DFS 0x00000001 |
| #define SHI1005_FLAGS_DFS_ROOT 0x00000002 |
| #define SHI1005_FLAGS_RESTRICT_EXCLUSIVE_OPENS 0x00000100 |
| #define SHI1005_FLAGS_FORCE_SHARED_DELETE 0x00000200 |
| #define SHI1005_FLAGS_ALLOW_NAMESPACE_CACHING 0x00000400 |
| #define SHI1005_FLAGS_ACCESS_BASED_DIRECTORY_ENUM 0x00000800 |
| #define SHI1005_FLAGS_FORCE_LEVELII_OPLOCK 0x00001000 |
| #define SHI1005_FLAGS_ENABLE_HASH_V1 0x00002000 |
| #define SHI1005_FLAGS_ENABLE_HASH_V2 0x00004000 |
| #define SHI1005_FLAGS_ENCRYPT_DATA 0x00008000 |
| #define SMB2_SHAREFLAG_IDENTITY_REMOTING 0x00040000 /* 3.1.1 */ |
| #define SMB2_SHAREFLAG_COMPRESS_DATA 0x00100000 /* 3.1.1 */ |
| #define SHI1005_FLAGS_ALL 0x0014FF33 |
| |
| /* Possible share capabilities */ |
| #define SMB2_SHARE_CAP_DFS cpu_to_le32(0x00000008) /* all dialects */ |
| #define SMB2_SHARE_CAP_CONTINUOUS_AVAILABILITY cpu_to_le32(0x00000010) /* 3.0 */ |
| #define SMB2_SHARE_CAP_SCALEOUT cpu_to_le32(0x00000020) /* 3.0 */ |
| #define SMB2_SHARE_CAP_CLUSTER cpu_to_le32(0x00000040) /* 3.0 */ |
| #define SMB2_SHARE_CAP_ASYMMETRIC cpu_to_le32(0x00000080) /* 3.02 */ |
| #define SMB2_SHARE_CAP_REDIRECT_TO_OWNER cpu_to_le32(0x00000100) /* 3.1.1 */ |
| |
| struct smb2_tree_connect_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 16 */ |
| __u8 ShareType; /* see below */ |
| __u8 Reserved; |
| __le32 ShareFlags; /* see below */ |
| __le32 Capabilities; /* see below */ |
| __le32 MaximalAccess; |
| } __packed; |
| |
| struct smb2_tree_disconnect_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 4 */ |
| __le16 Reserved; |
| } __packed; |
| |
| struct smb2_tree_disconnect_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 4 */ |
| __le16 Reserved; |
| } __packed; |
| |
| |
| /* |
| * SMB2_NEGOTIATE_PROTOCOL See MS-SMB2 section 2.2.3 |
| */ |
| /* SecurityMode flags */ |
| #define SMB2_NEGOTIATE_SIGNING_ENABLED 0x0001 |
| #define SMB2_NEGOTIATE_SIGNING_ENABLED_LE cpu_to_le16(0x0001) |
| #define SMB2_NEGOTIATE_SIGNING_REQUIRED 0x0002 |
| #define SMB2_NEGOTIATE_SIGNING_REQUIRED_LE cpu_to_le16(0x0002) |
| #define SMB2_SEC_MODE_FLAGS_ALL 0x0003 |
| |
| /* Capabilities flags */ |
| #define SMB2_GLOBAL_CAP_DFS 0x00000001 |
| #define SMB2_GLOBAL_CAP_LEASING 0x00000002 /* Resp only New to SMB2.1 */ |
| #define SMB2_GLOBAL_CAP_LARGE_MTU 0X00000004 /* Resp only New to SMB2.1 */ |
| #define SMB2_GLOBAL_CAP_MULTI_CHANNEL 0x00000008 /* New to SMB3 */ |
| #define SMB2_GLOBAL_CAP_PERSISTENT_HANDLES 0x00000010 /* New to SMB3 */ |
| #define SMB2_GLOBAL_CAP_DIRECTORY_LEASING 0x00000020 /* New to SMB3 */ |
| #define SMB2_GLOBAL_CAP_ENCRYPTION 0x00000040 /* New to SMB3 */ |
| /* Internal types */ |
| #define SMB2_NT_FIND 0x00100000 |
| #define SMB2_LARGE_FILES 0x00200000 |
| |
| #define SMB2_CLIENT_GUID_SIZE 16 |
| #define SMB2_CREATE_GUID_SIZE 16 |
| |
| /* Dialects */ |
| #define SMB10_PROT_ID 0x0000 /* local only, not sent on wire w/CIFS negprot */ |
| #define SMB20_PROT_ID 0x0202 |
| #define SMB21_PROT_ID 0x0210 |
| #define SMB2X_PROT_ID 0x02FF |
| #define SMB30_PROT_ID 0x0300 |
| #define SMB302_PROT_ID 0x0302 |
| #define SMB311_PROT_ID 0x0311 |
| #define BAD_PROT_ID 0xFFFF |
| |
| #define SMB311_SALT_SIZE 32 |
| /* Hash Algorithm Types */ |
| #define SMB2_PREAUTH_INTEGRITY_SHA512 cpu_to_le16(0x0001) |
| #define SMB2_PREAUTH_HASH_SIZE 64 |
| |
| /* Negotiate Contexts - ContextTypes. See MS-SMB2 section 2.2.3.1 for details */ |
| #define SMB2_PREAUTH_INTEGRITY_CAPABILITIES cpu_to_le16(1) |
| #define SMB2_ENCRYPTION_CAPABILITIES cpu_to_le16(2) |
| #define SMB2_COMPRESSION_CAPABILITIES cpu_to_le16(3) |
| #define SMB2_NETNAME_NEGOTIATE_CONTEXT_ID cpu_to_le16(5) |
| #define SMB2_TRANSPORT_CAPABILITIES cpu_to_le16(6) |
| #define SMB2_RDMA_TRANSFORM_CAPABILITIES cpu_to_le16(7) |
| #define SMB2_SIGNING_CAPABILITIES cpu_to_le16(8) |
| #define SMB2_POSIX_EXTENSIONS_AVAILABLE cpu_to_le16(0x100) |
| |
| struct smb2_neg_context { |
| __le16 ContextType; |
| __le16 DataLength; |
| __le32 Reserved; |
| /* Followed by array of data. NOTE: some servers require padding to 8 byte boundary */ |
| } __packed; |
| |
| /* |
| * SaltLength that the server send can be zero, so the only three required |
| * fields (all __le16) end up six bytes total, so the minimum context data len |
| * in the response is six bytes which accounts for |
| * |
| * HashAlgorithmCount, SaltLength, and 1 HashAlgorithm. |
| */ |
| #define MIN_PREAUTH_CTXT_DATA_LEN 6 |
| |
| struct smb2_preauth_neg_context { |
| __le16 ContextType; /* 1 */ |
| __le16 DataLength; |
| __le32 Reserved; |
| __le16 HashAlgorithmCount; /* 1 */ |
| __le16 SaltLength; |
| __le16 HashAlgorithms; /* HashAlgorithms[0] since only one defined */ |
| __u8 Salt[SMB311_SALT_SIZE]; |
| } __packed; |
| |
| /* Encryption Algorithms Ciphers */ |
| #define SMB2_ENCRYPTION_AES128_CCM cpu_to_le16(0x0001) |
| #define SMB2_ENCRYPTION_AES128_GCM cpu_to_le16(0x0002) |
| #define SMB2_ENCRYPTION_AES256_CCM cpu_to_le16(0x0003) |
| #define SMB2_ENCRYPTION_AES256_GCM cpu_to_le16(0x0004) |
| |
| /* Min encrypt context data is one cipher so 2 bytes + 2 byte count field */ |
| #define MIN_ENCRYPT_CTXT_DATA_LEN 4 |
| struct smb2_encryption_neg_context { |
| __le16 ContextType; /* 2 */ |
| __le16 DataLength; |
| __le32 Reserved; |
| /* CipherCount usally 2, but can be 3 when AES256-GCM enabled */ |
| __le16 CipherCount; /* AES128-GCM and AES128-CCM by default */ |
| __le16 Ciphers[]; |
| } __packed; |
| |
| /* See MS-SMB2 2.2.3.1.3 */ |
| #define SMB3_COMPRESS_NONE cpu_to_le16(0x0000) |
| #define SMB3_COMPRESS_LZNT1 cpu_to_le16(0x0001) |
| #define SMB3_COMPRESS_LZ77 cpu_to_le16(0x0002) |
| #define SMB3_COMPRESS_LZ77_HUFF cpu_to_le16(0x0003) |
| /* Pattern scanning algorithm See MS-SMB2 3.1.4.4.1 */ |
| #define SMB3_COMPRESS_PATTERN cpu_to_le16(0x0004) /* Pattern_V1 */ |
| |
| /* Compression Flags */ |
| #define SMB2_COMPRESSION_CAPABILITIES_FLAG_NONE cpu_to_le32(0x00000000) |
| #define SMB2_COMPRESSION_CAPABILITIES_FLAG_CHAINED cpu_to_le32(0x00000001) |
| |
| struct smb2_compression_capabilities_context { |
| __le16 ContextType; /* 3 */ |
| __le16 DataLength; |
| __le32 Reserved; |
| __le16 CompressionAlgorithmCount; |
| __le16 Padding; |
| __le32 Flags; |
| __le16 CompressionAlgorithms[3]; |
| __u16 Pad; /* Some servers require pad to DataLen multiple of 8 */ |
| /* Check if pad needed */ |
| } __packed; |
| |
| /* |
| * For smb2_netname_negotiate_context_id See MS-SMB2 2.2.3.1.4. |
| * Its struct simply contains NetName, an array of Unicode characters |
| */ |
| struct smb2_netname_neg_context { |
| __le16 ContextType; /* 5 */ |
| __le16 DataLength; |
| __le32 Reserved; |
| __le16 NetName[]; /* hostname of target converted to UCS-2 */ |
| } __packed; |
| |
| /* |
| * For smb2_transport_capabilities context see MS-SMB2 2.2.3.1.5 |
| * and 2.2.4.1.5 |
| */ |
| |
| /* Flags */ |
| #define SMB2_ACCEPT_TRANSPORT_LEVEL_SECURITY 0x00000001 |
| |
| struct smb2_transport_capabilities_context { |
| __le16 ContextType; /* 6 */ |
| __le16 DataLength; |
| __u32 Reserved; |
| __le32 Flags; |
| __u32 Pad; |
| } __packed; |
| |
| /* |
| * For rdma transform capabilities context see MS-SMB2 2.2.3.1.6 |
| * and 2.2.4.1.6 |
| */ |
| |
| /* RDMA Transform IDs */ |
| #define SMB2_RDMA_TRANSFORM_NONE 0x0000 |
| #define SMB2_RDMA_TRANSFORM_ENCRYPTION 0x0001 |
| #define SMB2_RDMA_TRANSFORM_SIGNING 0x0002 |
| |
| struct smb2_rdma_transform_capabilities_context { |
| __le16 ContextType; /* 7 */ |
| __le16 DataLength; |
| __u32 Reserved; |
| __le16 TransformCount; |
| __u16 Reserved1; |
| __u32 Reserved2; |
| __le16 RDMATransformIds[]; |
| } __packed; |
| |
| /* |
| * For signing capabilities context see MS-SMB2 2.2.3.1.7 |
| * and 2.2.4.1.7 |
| */ |
| |
| /* Signing algorithms */ |
| #define SIGNING_ALG_HMAC_SHA256 0 |
| #define SIGNING_ALG_HMAC_SHA256_LE cpu_to_le16(0) |
| #define SIGNING_ALG_AES_CMAC 1 |
| #define SIGNING_ALG_AES_CMAC_LE cpu_to_le16(1) |
| #define SIGNING_ALG_AES_GMAC 2 |
| #define SIGNING_ALG_AES_GMAC_LE cpu_to_le16(2) |
| |
| struct smb2_signing_capabilities { |
| __le16 ContextType; /* 8 */ |
| __le16 DataLength; |
| __le32 Reserved; |
| __le16 SigningAlgorithmCount; |
| __le16 SigningAlgorithms[]; |
| /* Followed by padding to 8 byte boundary (required by some servers) */ |
| } __packed; |
| |
| #define POSIX_CTXT_DATA_LEN 16 |
| struct smb2_posix_neg_context { |
| __le16 ContextType; /* 0x100 */ |
| __le16 DataLength; |
| __le32 Reserved; |
| __u8 Name[16]; /* POSIX ctxt GUID 93AD25509CB411E7B42383DE968BCD7C */ |
| } __packed; |
| |
| struct smb2_negotiate_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 36 */ |
| __le16 DialectCount; |
| __le16 SecurityMode; |
| __le16 Reserved; /* MBZ */ |
| __le32 Capabilities; |
| __u8 ClientGUID[SMB2_CLIENT_GUID_SIZE]; |
| /* In SMB3.02 and earlier next three were MBZ le64 ClientStartTime */ |
| __le32 NegotiateContextOffset; /* SMB3.1.1 only. MBZ earlier */ |
| __le16 NegotiateContextCount; /* SMB3.1.1 only. MBZ earlier */ |
| __le16 Reserved2; |
| __le16 Dialects[]; |
| } __packed; |
| |
| struct smb2_negotiate_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 65 */ |
| __le16 SecurityMode; |
| __le16 DialectRevision; |
| __le16 NegotiateContextCount; /* Prior to SMB3.1.1 was Reserved & MBZ */ |
| __u8 ServerGUID[16]; |
| __le32 Capabilities; |
| __le32 MaxTransactSize; |
| __le32 MaxReadSize; |
| __le32 MaxWriteSize; |
| __le64 SystemTime; /* MBZ */ |
| __le64 ServerStartTime; |
| __le16 SecurityBufferOffset; |
| __le16 SecurityBufferLength; |
| __le32 NegotiateContextOffset; /* Pre:SMB3.1.1 was reserved/ignored */ |
| __u8 Buffer[]; /* variable length GSS security buffer */ |
| } __packed; |
| |
| |
| /* |
| * SMB2_SESSION_SETUP See MS-SMB2 section 2.2.5 |
| */ |
| /* Flags */ |
| #define SMB2_SESSION_REQ_FLAG_BINDING 0x01 |
| #define SMB2_SESSION_REQ_FLAG_ENCRYPT_DATA 0x04 |
| |
| struct smb2_sess_setup_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 25 */ |
| __u8 Flags; |
| __u8 SecurityMode; |
| __le32 Capabilities; |
| __le32 Channel; |
| __le16 SecurityBufferOffset; |
| __le16 SecurityBufferLength; |
| __le64 PreviousSessionId; |
| __u8 Buffer[]; /* variable length GSS security buffer */ |
| } __packed; |
| |
| /* Currently defined SessionFlags */ |
| #define SMB2_SESSION_FLAG_IS_GUEST 0x0001 |
| #define SMB2_SESSION_FLAG_IS_GUEST_LE cpu_to_le16(0x0001) |
| #define SMB2_SESSION_FLAG_IS_NULL 0x0002 |
| #define SMB2_SESSION_FLAG_IS_NULL_LE cpu_to_le16(0x0002) |
| #define SMB2_SESSION_FLAG_ENCRYPT_DATA 0x0004 |
| #define SMB2_SESSION_FLAG_ENCRYPT_DATA_LE cpu_to_le16(0x0004) |
| |
| struct smb2_sess_setup_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 9 */ |
| __le16 SessionFlags; |
| __le16 SecurityBufferOffset; |
| __le16 SecurityBufferLength; |
| __u8 Buffer[]; /* variable length GSS security buffer */ |
| } __packed; |
| |
| |
| /* |
| * SMB2_LOGOFF See MS-SMB2 section 2.2.7 |
| */ |
| struct smb2_logoff_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 4 */ |
| __le16 Reserved; |
| } __packed; |
| |
| struct smb2_logoff_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 4 */ |
| __le16 Reserved; |
| } __packed; |
| |
| |
| /* |
| * SMB2_CLOSE See MS-SMB2 section 2.2.15 |
| */ |
| /* Currently defined values for close flags */ |
| #define SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB cpu_to_le16(0x0001) |
| struct smb2_close_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 24 */ |
| __le16 Flags; |
| __le32 Reserved; |
| __u64 PersistentFileId; /* opaque endianness */ |
| __u64 VolatileFileId; /* opaque endianness */ |
| } __packed; |
| |
| /* |
| * Maximum size of a SMB2_CLOSE response is 64 (smb2 header) + 60 (data) |
| */ |
| #define MAX_SMB2_CLOSE_RESPONSE_SIZE 124 |
| |
| struct smb2_close_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* 60 */ |
| __le16 Flags; |
| __le32 Reserved; |
| __le64 CreationTime; |
| __le64 LastAccessTime; |
| __le64 LastWriteTime; |
| __le64 ChangeTime; |
| __le64 AllocationSize; /* Beginning of FILE_STANDARD_INFO equivalent */ |
| __le64 EndOfFile; |
| __le32 Attributes; |
| } __packed; |
| |
| |
| /* |
| * SMB2_READ See MS-SMB2 section 2.2.19 |
| */ |
| /* For read request Flags field below, following flag is defined for SMB3.02 */ |
| #define SMB2_READFLAG_READ_UNBUFFERED 0x01 |
| #define SMB2_READFLAG_REQUEST_COMPRESSED 0x02 /* See MS-SMB2 2.2.19 */ |
| |
| /* Channel field for read and write: exactly one of following flags can be set*/ |
| #define SMB2_CHANNEL_NONE cpu_to_le32(0x00000000) |
| #define SMB2_CHANNEL_RDMA_V1 cpu_to_le32(0x00000001) |
| #define SMB2_CHANNEL_RDMA_V1_INVALIDATE cpu_to_le32(0x00000002) |
| #define SMB2_CHANNEL_RDMA_TRANSFORM cpu_to_le32(0x00000003) |
| |
| /* SMB2 read request without RFC1001 length at the beginning */ |
| struct smb2_read_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 49 */ |
| __u8 Padding; /* offset from start of SMB2 header to place read */ |
| __u8 Flags; /* MBZ unless SMB3.02 or later */ |
| __le32 Length; |
| __le64 Offset; |
| __u64 PersistentFileId; |
| __u64 VolatileFileId; |
| __le32 MinimumCount; |
| __le32 Channel; /* MBZ except for SMB3 or later */ |
| __le32 RemainingBytes; |
| __le16 ReadChannelInfoOffset; |
| __le16 ReadChannelInfoLength; |
| __u8 Buffer[]; |
| } __packed; |
| |
| /* Read flags */ |
| #define SMB2_READFLAG_RESPONSE_NONE cpu_to_le32(0x00000000) |
| #define SMB2_READFLAG_RESPONSE_RDMA_TRANSFORM cpu_to_le32(0x00000001) |
| |
| struct smb2_read_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 17 */ |
| __u8 DataOffset; |
| __u8 Reserved; |
| __le32 DataLength; |
| __le32 DataRemaining; |
| __le32 Flags; |
| __u8 Buffer[]; |
| } __packed; |
| |
| |
| /* |
| * SMB2_WRITE See MS-SMB2 section 2.2.21 |
| */ |
| /* For write request Flags field below the following flags are defined: */ |
| #define SMB2_WRITEFLAG_WRITE_THROUGH 0x00000001 /* SMB2.1 or later */ |
| #define SMB2_WRITEFLAG_WRITE_UNBUFFERED 0x00000002 /* SMB3.02 or later */ |
| |
| struct smb2_write_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 49 */ |
| __le16 DataOffset; /* offset from start of SMB2 header to write data */ |
| __le32 Length; |
| __le64 Offset; |
| __u64 PersistentFileId; /* opaque endianness */ |
| __u64 VolatileFileId; /* opaque endianness */ |
| __le32 Channel; /* MBZ unless SMB3.02 or later */ |
| __le32 RemainingBytes; |
| __le16 WriteChannelInfoOffset; |
| __le16 WriteChannelInfoLength; |
| __le32 Flags; |
| __u8 Buffer[]; |
| } __packed; |
| |
| struct smb2_write_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 17 */ |
| __u8 DataOffset; |
| __u8 Reserved; |
| __le32 DataLength; |
| __le32 DataRemaining; |
| __u32 Reserved2; |
| __u8 Buffer[]; |
| } __packed; |
| |
| |
| /* |
| * SMB2_FLUSH See MS-SMB2 section 2.2.17 |
| */ |
| struct smb2_flush_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 24 */ |
| __le16 Reserved1; |
| __le32 Reserved2; |
| __u64 PersistentFileId; |
| __u64 VolatileFileId; |
| } __packed; |
| |
| struct smb2_flush_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; |
| __le16 Reserved; |
| } __packed; |
| |
| #define SMB2_LOCKFLAG_SHARED 0x0001 |
| #define SMB2_LOCKFLAG_EXCLUSIVE 0x0002 |
| #define SMB2_LOCKFLAG_UNLOCK 0x0004 |
| #define SMB2_LOCKFLAG_FAIL_IMMEDIATELY 0x0010 |
| #define SMB2_LOCKFLAG_MASK 0x0007 |
| |
| struct smb2_lock_element { |
| __le64 Offset; |
| __le64 Length; |
| __le32 Flags; |
| __le32 Reserved; |
| } __packed; |
| |
| struct smb2_lock_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 48 */ |
| __le16 LockCount; |
| /* |
| * The least significant four bits are the index, the other 28 bits are |
| * the lock sequence number (0 to 64). See MS-SMB2 2.2.26 |
| */ |
| __le32 LockSequenceNumber; |
| __u64 PersistentFileId; |
| __u64 VolatileFileId; |
| /* Followed by at least one */ |
| union { |
| struct smb2_lock_element lock; |
| DECLARE_FLEX_ARRAY(struct smb2_lock_element, locks); |
| }; |
| } __packed; |
| |
| struct smb2_lock_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 4 */ |
| __le16 Reserved; |
| } __packed; |
| |
| struct smb2_echo_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 4 */ |
| __u16 Reserved; |
| } __packed; |
| |
| struct smb2_echo_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 4 */ |
| __u16 Reserved; |
| } __packed; |
| |
| /* |
| * Valid FileInformation classes for query directory |
| * |
| * Note that these are a subset of the (file) QUERY_INFO levels defined |
| * later in this file (but since QUERY_DIRECTORY uses equivalent numbers |
| * we do not redefine them here) |
| * |
| * FileDirectoryInfomation 0x01 |
| * FileFullDirectoryInformation 0x02 |
| * FileIdFullDirectoryInformation 0x26 |
| * FileBothDirectoryInformation 0x03 |
| * FileIdBothDirectoryInformation 0x25 |
| * FileNamesInformation 0x0C |
| * FileIdExtdDirectoryInformation 0x3C |
| */ |
| |
| /* search (query_directory) Flags field */ |
| #define SMB2_RESTART_SCANS 0x01 |
| #define SMB2_RETURN_SINGLE_ENTRY 0x02 |
| #define SMB2_INDEX_SPECIFIED 0x04 |
| #define SMB2_REOPEN 0x10 |
| |
| struct smb2_query_directory_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 33 */ |
| __u8 FileInformationClass; |
| __u8 Flags; |
| __le32 FileIndex; |
| __u64 PersistentFileId; |
| __u64 VolatileFileId; |
| __le16 FileNameOffset; |
| __le16 FileNameLength; |
| __le32 OutputBufferLength; |
| __u8 Buffer[]; |
| } __packed; |
| |
| struct smb2_query_directory_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 9 */ |
| __le16 OutputBufferOffset; |
| __le32 OutputBufferLength; |
| __u8 Buffer[]; |
| } __packed; |
| |
| /* |
| * Maximum number of iovs we need for a set-info request. |
| * The largest one is rename/hardlink |
| * [0] : struct smb2_set_info_req + smb2_file_[rename|link]_info |
| * [1] : path |
| * [2] : compound padding |
| */ |
| #define SMB2_SET_INFO_IOV_SIZE 3 |
| |
| struct smb2_set_info_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 33 */ |
| __u8 InfoType; |
| __u8 FileInfoClass; |
| __le32 BufferLength; |
| __le16 BufferOffset; |
| __u16 Reserved; |
| __le32 AdditionalInformation; |
| __u64 PersistentFileId; |
| __u64 VolatileFileId; |
| __u8 Buffer[]; |
| } __packed; |
| |
| struct smb2_set_info_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 2 */ |
| } __packed; |
| |
| /* |
| * SMB2_NOTIFY See MS-SMB2 section 2.2.35 |
| */ |
| /* notify flags */ |
| #define SMB2_WATCH_TREE 0x0001 |
| |
| /* notify completion filter flags. See MS-FSCC 2.6 and MS-SMB2 2.2.35 */ |
| #define FILE_NOTIFY_CHANGE_FILE_NAME 0x00000001 |
| #define FILE_NOTIFY_CHANGE_DIR_NAME 0x00000002 |
| #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x00000004 |
| #define FILE_NOTIFY_CHANGE_SIZE 0x00000008 |
| #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x00000010 |
| #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x00000020 |
| #define FILE_NOTIFY_CHANGE_CREATION 0x00000040 |
| #define FILE_NOTIFY_CHANGE_EA 0x00000080 |
| #define FILE_NOTIFY_CHANGE_SECURITY 0x00000100 |
| #define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200 |
| #define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400 |
| #define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800 |
| |
| /* SMB2 Notify Action Flags */ |
| #define FILE_ACTION_ADDED 0x00000001 |
| #define FILE_ACTION_REMOVED 0x00000002 |
| #define FILE_ACTION_MODIFIED 0x00000003 |
| #define FILE_ACTION_RENAMED_OLD_NAME 0x00000004 |
| #define FILE_ACTION_RENAMED_NEW_NAME 0x00000005 |
| #define FILE_ACTION_ADDED_STREAM 0x00000006 |
| #define FILE_ACTION_REMOVED_STREAM 0x00000007 |
| #define FILE_ACTION_MODIFIED_STREAM 0x00000008 |
| #define FILE_ACTION_REMOVED_BY_DELETE 0x00000009 |
| |
| struct smb2_change_notify_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; |
| __le16 Flags; |
| __le32 OutputBufferLength; |
| __u64 PersistentFileId; /* opaque endianness */ |
| __u64 VolatileFileId; /* opaque endianness */ |
| __le32 CompletionFilter; |
| __u32 Reserved; |
| } __packed; |
| |
| struct smb2_change_notify_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 9 */ |
| __le16 OutputBufferOffset; |
| __le32 OutputBufferLength; |
| __u8 Buffer[]; /* array of file notify structs */ |
| } __packed; |
| |
| |
| /* |
| * SMB2_CREATE See MS-SMB2 section 2.2.13 |
| */ |
| /* Oplock levels */ |
| #define SMB2_OPLOCK_LEVEL_NONE 0x00 |
| #define SMB2_OPLOCK_LEVEL_II 0x01 |
| #define SMB2_OPLOCK_LEVEL_EXCLUSIVE 0x08 |
| #define SMB2_OPLOCK_LEVEL_BATCH 0x09 |
| #define SMB2_OPLOCK_LEVEL_LEASE 0xFF |
| /* Non-spec internal type */ |
| #define SMB2_OPLOCK_LEVEL_NOCHANGE 0x99 |
| |
| /* Impersonation Levels. See MS-WPO section 9.7 and MSDN-IMPERS */ |
| #define IL_ANONYMOUS cpu_to_le32(0x00000000) |
| #define IL_IDENTIFICATION cpu_to_le32(0x00000001) |
| #define IL_IMPERSONATION cpu_to_le32(0x00000002) |
| #define IL_DELEGATE cpu_to_le32(0x00000003) |
| |
| /* File Attrubutes */ |
| #define FILE_ATTRIBUTE_READONLY 0x00000001 |
| #define FILE_ATTRIBUTE_HIDDEN 0x00000002 |
| #define FILE_ATTRIBUTE_SYSTEM 0x00000004 |
| #define FILE_ATTRIBUTE_DIRECTORY 0x00000010 |
| #define FILE_ATTRIBUTE_ARCHIVE 0x00000020 |
| #define FILE_ATTRIBUTE_NORMAL 0x00000080 |
| #define FILE_ATTRIBUTE_TEMPORARY 0x00000100 |
| #define FILE_ATTRIBUTE_SPARSE_FILE 0x00000200 |
| #define FILE_ATTRIBUTE_REPARSE_POINT 0x00000400 |
| #define FILE_ATTRIBUTE_COMPRESSED 0x00000800 |
| #define FILE_ATTRIBUTE_OFFLINE 0x00001000 |
| #define FILE_ATTRIBUTE_NOT_CONTENT_INDEXED 0x00002000 |
| #define FILE_ATTRIBUTE_ENCRYPTED 0x00004000 |
| #define FILE_ATTRIBUTE_INTEGRITY_STREAM 0x00008000 |
| #define FILE_ATTRIBUTE_NO_SCRUB_DATA 0x00020000 |
| #define FILE_ATTRIBUTE__MASK 0x00007FB7 |
| |
| #define FILE_ATTRIBUTE_READONLY_LE cpu_to_le32(0x00000001) |
| #define FILE_ATTRIBUTE_HIDDEN_LE cpu_to_le32(0x00000002) |
| #define FILE_ATTRIBUTE_SYSTEM_LE cpu_to_le32(0x00000004) |
| #define FILE_ATTRIBUTE_DIRECTORY_LE cpu_to_le32(0x00000010) |
| #define FILE_ATTRIBUTE_ARCHIVE_LE cpu_to_le32(0x00000020) |
| #define FILE_ATTRIBUTE_NORMAL_LE cpu_to_le32(0x00000080) |
| #define FILE_ATTRIBUTE_TEMPORARY_LE cpu_to_le32(0x00000100) |
| #define FILE_ATTRIBUTE_SPARSE_FILE_LE cpu_to_le32(0x00000200) |
| #define FILE_ATTRIBUTE_REPARSE_POINT_LE cpu_to_le32(0x00000400) |
| #define FILE_ATTRIBUTE_COMPRESSED_LE cpu_to_le32(0x00000800) |
| #define FILE_ATTRIBUTE_OFFLINE_LE cpu_to_le32(0x00001000) |
| #define FILE_ATTRIBUTE_NOT_CONTENT_INDEXED_LE cpu_to_le32(0x00002000) |
| #define FILE_ATTRIBUTE_ENCRYPTED_LE cpu_to_le32(0x00004000) |
| #define FILE_ATTRIBUTE_INTEGRITY_STREAM_LE cpu_to_le32(0x00008000) |
| #define FILE_ATTRIBUTE_NO_SCRUB_DATA_LE cpu_to_le32(0x00020000) |
| #define FILE_ATTRIBUTE_MASK_LE cpu_to_le32(0x00007FB7) |
| |
| /* Desired Access Flags */ |
| #define FILE_READ_DATA_LE cpu_to_le32(0x00000001) |
| #define FILE_LIST_DIRECTORY_LE cpu_to_le32(0x00000001) |
| #define FILE_WRITE_DATA_LE cpu_to_le32(0x00000002) |
| #define FILE_APPEND_DATA_LE cpu_to_le32(0x00000004) |
| #define FILE_ADD_SUBDIRECTORY_LE cpu_to_le32(0x00000004) |
| #define FILE_READ_EA_LE cpu_to_le32(0x00000008) |
| #define FILE_WRITE_EA_LE cpu_to_le32(0x00000010) |
| #define FILE_EXECUTE_LE cpu_to_le32(0x00000020) |
| #define FILE_DELETE_CHILD_LE cpu_to_le32(0x00000040) |
| #define FILE_READ_ATTRIBUTES_LE cpu_to_le32(0x00000080) |
| #define FILE_WRITE_ATTRIBUTES_LE cpu_to_le32(0x00000100) |
| #define FILE_DELETE_LE cpu_to_le32(0x00010000) |
| #define FILE_READ_CONTROL_LE cpu_to_le32(0x00020000) |
| #define FILE_WRITE_DAC_LE cpu_to_le32(0x00040000) |
| #define FILE_WRITE_OWNER_LE cpu_to_le32(0x00080000) |
| #define FILE_SYNCHRONIZE_LE cpu_to_le32(0x00100000) |
| #define FILE_ACCESS_SYSTEM_SECURITY_LE cpu_to_le32(0x01000000) |
| #define FILE_MAXIMAL_ACCESS_LE cpu_to_le32(0x02000000) |
| #define FILE_GENERIC_ALL_LE cpu_to_le32(0x10000000) |
| #define FILE_GENERIC_EXECUTE_LE cpu_to_le32(0x20000000) |
| #define FILE_GENERIC_WRITE_LE cpu_to_le32(0x40000000) |
| #define FILE_GENERIC_READ_LE cpu_to_le32(0x80000000) |
| #define DESIRED_ACCESS_MASK cpu_to_le32(0xF21F01FF) |
| |
| |
| #define FILE_READ_DESIRED_ACCESS_LE (FILE_READ_DATA_LE | \ |
| FILE_READ_EA_LE | \ |
| FILE_GENERIC_READ_LE) |
| #define FILE_WRITE_DESIRE_ACCESS_LE (FILE_WRITE_DATA_LE | \ |
| FILE_APPEND_DATA_LE | \ |
| FILE_WRITE_EA_LE | \ |
| FILE_WRITE_ATTRIBUTES_LE | \ |
| FILE_GENERIC_WRITE_LE) |
| |
| /* ShareAccess Flags */ |
| #define FILE_SHARE_READ_LE cpu_to_le32(0x00000001) |
| #define FILE_SHARE_WRITE_LE cpu_to_le32(0x00000002) |
| #define FILE_SHARE_DELETE_LE cpu_to_le32(0x00000004) |
| #define FILE_SHARE_ALL_LE cpu_to_le32(0x00000007) |
| |
| /* CreateDisposition Flags */ |
| #define FILE_SUPERSEDE_LE cpu_to_le32(0x00000000) |
| #define FILE_OPEN_LE cpu_to_le32(0x00000001) |
| #define FILE_CREATE_LE cpu_to_le32(0x00000002) |
| #define FILE_OPEN_IF_LE cpu_to_le32(0x00000003) |
| #define FILE_OVERWRITE_LE cpu_to_le32(0x00000004) |
| #define FILE_OVERWRITE_IF_LE cpu_to_le32(0x00000005) |
| #define FILE_CREATE_MASK_LE cpu_to_le32(0x00000007) |
| |
| #define FILE_READ_RIGHTS (FILE_READ_DATA | FILE_READ_EA \ |
| | FILE_READ_ATTRIBUTES) |
| #define FILE_WRITE_RIGHTS (FILE_WRITE_DATA | FILE_APPEND_DATA \ |
| | FILE_WRITE_EA | FILE_WRITE_ATTRIBUTES) |
| #define FILE_EXEC_RIGHTS (FILE_EXECUTE) |
| |
| /* CreateOptions Flags */ |
| #define FILE_DIRECTORY_FILE_LE cpu_to_le32(0x00000001) |
| /* same as #define CREATE_NOT_FILE_LE cpu_to_le32(0x00000001) */ |
| #define FILE_WRITE_THROUGH_LE cpu_to_le32(0x00000002) |
| #define FILE_SEQUENTIAL_ONLY_LE cpu_to_le32(0x00000004) |
| #define FILE_NO_INTERMEDIATE_BUFFERING_LE cpu_to_le32(0x00000008) |
| #define FILE_NON_DIRECTORY_FILE_LE cpu_to_le32(0x00000040) |
| #define FILE_COMPLETE_IF_OPLOCKED_LE cpu_to_le32(0x00000100) |
| #define FILE_NO_EA_KNOWLEDGE_LE cpu_to_le32(0x00000200) |
| #define FILE_RANDOM_ACCESS_LE cpu_to_le32(0x00000800) |
| #define FILE_DELETE_ON_CLOSE_LE cpu_to_le32(0x00001000) |
| #define FILE_OPEN_BY_FILE_ID_LE cpu_to_le32(0x00002000) |
| #define FILE_OPEN_FOR_BACKUP_INTENT_LE cpu_to_le32(0x00004000) |
| #define FILE_NO_COMPRESSION_LE cpu_to_le32(0x00008000) |
| #define FILE_OPEN_REPARSE_POINT_LE cpu_to_le32(0x00200000) |
| #define FILE_OPEN_NO_RECALL_LE cpu_to_le32(0x00400000) |
| #define CREATE_OPTIONS_MASK_LE cpu_to_le32(0x00FFFFFF) |
| |
| #define FILE_READ_RIGHTS_LE (FILE_READ_DATA_LE | FILE_READ_EA_LE \ |
| | FILE_READ_ATTRIBUTES_LE) |
| #define FILE_WRITE_RIGHTS_LE (FILE_WRITE_DATA_LE | FILE_APPEND_DATA_LE \ |
| | FILE_WRITE_EA_LE | FILE_WRITE_ATTRIBUTES_LE) |
| #define FILE_EXEC_RIGHTS_LE (FILE_EXECUTE_LE) |
| |
| /* Create Context Values */ |
| #define SMB2_CREATE_EA_BUFFER "ExtA" /* extended attributes */ |
| #define SMB2_CREATE_SD_BUFFER "SecD" /* security descriptor */ |
| #define SMB2_CREATE_DURABLE_HANDLE_REQUEST "DHnQ" |
| #define SMB2_CREATE_DURABLE_HANDLE_RECONNECT "DHnC" |
| #define SMB2_CREATE_ALLOCATION_SIZE "AISi" |
| #define SMB2_CREATE_QUERY_MAXIMAL_ACCESS_REQUEST "MxAc" |
| #define SMB2_CREATE_TIMEWARP_REQUEST "TWrp" |
| #define SMB2_CREATE_QUERY_ON_DISK_ID "QFid" |
| #define SMB2_CREATE_REQUEST_LEASE "RqLs" |
| #define SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 "DH2Q" |
| #define SMB2_CREATE_DURABLE_HANDLE_RECONNECT_V2 "DH2C" |
| #define SMB2_CREATE_TAG_POSIX "\x93\xAD\x25\x50\x9C\xB4\x11\xE7\xB4\x23\x83\xDE\x96\x8B\xCD\x7C" |
| #define SMB2_CREATE_APP_INSTANCE_ID "\x45\xBC\xA6\x6A\xEF\xA7\xF7\x4A\x90\x08\xFA\x46\x2E\x14\x4D\x74" |
| #define SMB2_CREATE_APP_INSTANCE_VERSION "\xB9\x82\xD0\xB7\x3B\x56\x07\x4F\xA0\x7B\x52\x4A\x81\x16\xA0\x10" |
| #define SVHDX_OPEN_DEVICE_CONTEXT "\x9C\xCB\xCF\x9E\x04\xC1\xE6\x43\x98\x0E\x15\x8D\xA1\xF6\xEC\x83" |
| #define SMB2_CREATE_TAG_AAPL "AAPL" |
| |
| /* Flag (SMB3 open response) values */ |
| #define SMB2_CREATE_FLAG_REPARSEPOINT 0x01 |
| |
| struct create_context { |
| __le32 Next; |
| __le16 NameOffset; |
| __le16 NameLength; |
| __le16 Reserved; |
| __le16 DataOffset; |
| __le32 DataLength; |
| __u8 Buffer[]; |
| } __packed; |
| |
| struct smb2_create_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 57 */ |
| __u8 SecurityFlags; |
| __u8 RequestedOplockLevel; |
| __le32 ImpersonationLevel; |
| __le64 SmbCreateFlags; |
| __le64 Reserved; |
| __le32 DesiredAccess; |
| __le32 FileAttributes; |
| __le32 ShareAccess; |
| __le32 CreateDisposition; |
| __le32 CreateOptions; |
| __le16 NameOffset; |
| __le16 NameLength; |
| __le32 CreateContextsOffset; |
| __le32 CreateContextsLength; |
| __u8 Buffer[]; |
| } __packed; |
| |
| struct smb2_create_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 89 */ |
| __u8 OplockLevel; |
| __u8 Flags; /* 0x01 if reparse point */ |
| __le32 CreateAction; |
| __le64 CreationTime; |
| __le64 LastAccessTime; |
| __le64 LastWriteTime; |
| __le64 ChangeTime; |
| __le64 AllocationSize; |
| __le64 EndofFile; |
| __le32 FileAttributes; |
| __le32 Reserved2; |
| __u64 PersistentFileId; |
| __u64 VolatileFileId; |
| __le32 CreateContextsOffset; |
| __le32 CreateContextsLength; |
| __u8 Buffer[]; |
| } __packed; |
| |
| struct create_posix { |
| struct create_context ccontext; |
| __u8 Name[16]; |
| __le32 Mode; |
| __u32 Reserved; |
| } __packed; |
| |
| #define SMB2_LEASE_NONE_LE cpu_to_le32(0x00) |
| #define SMB2_LEASE_READ_CACHING_LE cpu_to_le32(0x01) |
| #define SMB2_LEASE_HANDLE_CACHING_LE cpu_to_le32(0x02) |
| #define SMB2_LEASE_WRITE_CACHING_LE cpu_to_le32(0x04) |
| |
| #define SMB2_LEASE_FLAG_BREAK_IN_PROGRESS_LE cpu_to_le32(0x02) |
| |
| #define SMB2_LEASE_KEY_SIZE 16 |
| |
| struct lease_context { |
| __u8 LeaseKey[SMB2_LEASE_KEY_SIZE]; |
| __le32 LeaseState; |
| __le32 LeaseFlags; |
| __le64 LeaseDuration; |
| } __packed; |
| |
| struct lease_context_v2 { |
| __u8 LeaseKey[SMB2_LEASE_KEY_SIZE]; |
| __le32 LeaseState; |
| __le32 LeaseFlags; |
| __le64 LeaseDuration; |
| __u8 ParentLeaseKey[SMB2_LEASE_KEY_SIZE]; |
| __le16 Epoch; |
| __le16 Reserved; |
| } __packed; |
| |
| struct create_lease { |
| struct create_context ccontext; |
| __u8 Name[8]; |
| struct lease_context lcontext; |
| } __packed; |
| |
| struct create_lease_v2 { |
| struct create_context ccontext; |
| __u8 Name[8]; |
| struct lease_context_v2 lcontext; |
| __u8 Pad[4]; |
| } __packed; |
| |
| /* See MS-SMB2 2.2.31 and 2.2.32 */ |
| struct smb2_ioctl_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 57 */ |
| __le16 Reserved; /* offset from start of SMB2 header to write data */ |
| __le32 CtlCode; |
| __u64 PersistentFileId; |
| __u64 VolatileFileId; |
| __le32 InputOffset; /* Reserved MBZ */ |
| __le32 InputCount; |
| __le32 MaxInputResponse; |
| __le32 OutputOffset; |
| __le32 OutputCount; |
| __le32 MaxOutputResponse; |
| __le32 Flags; |
| __le32 Reserved2; |
| __u8 Buffer[]; |
| } __packed; |
| |
| struct smb2_ioctl_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 49 */ |
| __le16 Reserved; |
| __le32 CtlCode; |
| __u64 PersistentFileId; |
| __u64 VolatileFileId; |
| __le32 InputOffset; /* Reserved MBZ */ |
| __le32 InputCount; |
| __le32 OutputOffset; |
| __le32 OutputCount; |
| __le32 Flags; |
| __le32 Reserved2; |
| __u8 Buffer[]; |
| } __packed; |
| |
| /* this goes in the ioctl buffer when doing FSCTL_SET_ZERO_DATA */ |
| struct file_zero_data_information { |
| __le64 FileOffset; |
| __le64 BeyondFinalZero; |
| } __packed; |
| |
| /* See MS-FSCC 2.3.7 */ |
| struct duplicate_extents_to_file { |
| __u64 PersistentFileHandle; /* source file handle, opaque endianness */ |
| __u64 VolatileFileHandle; |
| __le64 SourceFileOffset; |
| __le64 TargetFileOffset; |
| __le64 ByteCount; /* Bytes to be copied */ |
| } __packed; |
| |
| /* See MS-FSCC 2.3.8 */ |
| #define DUPLICATE_EXTENTS_DATA_EX_SOURCE_ATOMIC 0x00000001 |
| struct duplicate_extents_to_file_ex { |
| __u64 PersistentFileHandle; /* source file handle, opaque endianness */ |
| __u64 VolatileFileHandle; |
| __le64 SourceFileOffset; |
| __le64 TargetFileOffset; |
| __le64 ByteCount; /* Bytes to be copied */ |
| __le32 Flags; |
| __le32 Reserved; |
| } __packed; |
| |
| |
| /* See MS-FSCC 2.3.20 */ |
| struct fsctl_get_integrity_information_rsp { |
| __le16 ChecksumAlgorithm; |
| __le16 Reserved; |
| __le32 Flags; |
| __le32 ChecksumChunkSizeInBytes; |
| __le32 ClusterSizeInBytes; |
| } __packed; |
| |
| /* See MS-FSCC 2.3.55 */ |
| struct fsctl_query_file_regions_req { |
| __le64 FileOffset; |
| __le64 Length; |
| __le32 DesiredUsage; |
| __le32 Reserved; |
| } __packed; |
| |
| /* DesiredUsage flags see MS-FSCC 2.3.56.1 */ |
| #define FILE_USAGE_INVALID_RANGE 0x00000000 |
| #define FILE_USAGE_VALID_CACHED_DATA 0x00000001 |
| #define FILE_USAGE_NONCACHED_DATA 0x00000002 |
| |
| struct file_region_info { |
| __le64 FileOffset; |
| __le64 Length; |
| __le32 DesiredUsage; |
| __le32 Reserved; |
| } __packed; |
| |
| /* See MS-FSCC 2.3.56 */ |
| struct fsctl_query_file_region_rsp { |
| __le32 Flags; |
| __le32 TotalRegionEntryCount; |
| __le32 RegionEntryCount; |
| __u32 Reserved; |
| struct file_region_info Regions[]; |
| } __packed; |
| |
| /* See MS-FSCC 2.3.58 */ |
| struct fsctl_query_on_disk_vol_info_rsp { |
| __le64 DirectoryCount; |
| __le64 FileCount; |
| __le16 FsFormatMajVersion; |
| __le16 FsFormatMinVersion; |
| __u8 FsFormatName[24]; |
| __le64 FormatTime; |
| __le64 LastUpdateTime; |
| __u8 CopyrightInfo[68]; |
| __u8 AbstractInfo[68]; |
| __u8 FormatImplInfo[68]; |
| __u8 LastModifyImplInfo[68]; |
| } __packed; |
| |
| /* See MS-FSCC 2.3.73 */ |
| struct fsctl_set_integrity_information_req { |
| __le16 ChecksumAlgorithm; |
| __le16 Reserved; |
| __le32 Flags; |
| } __packed; |
| |
| /* See MS-FSCC 2.3.75 */ |
| struct fsctl_set_integrity_info_ex_req { |
| __u8 EnableIntegrity; |
| __u8 KeepState; |
| __u16 Reserved; |
| __le32 Flags; |
| __u8 Version; |
| __u8 Reserved2[7]; |
| } __packed; |
| |
| /* Integrity ChecksumAlgorithm choices for above */ |
| #define CHECKSUM_TYPE_NONE 0x0000 |
| #define CHECKSUM_TYPE_CRC64 0x0002 |
| #define CHECKSUM_TYPE_UNCHANGED 0xFFFF /* set only */ |
| |
| /* Integrity flags for above */ |
| #define FSCTL_INTEGRITY_FLAG_CHECKSUM_ENFORCEMENT_OFF 0x00000001 |
| |
| /* Reparse structures - see MS-FSCC 2.1.2 */ |
| |
| /* struct fsctl_reparse_info_req is empty, only response structs (see below) */ |
| struct reparse_data_buffer { |
| __le32 ReparseTag; |
| __le16 ReparseDataLength; |
| __u16 Reserved; |
| __u8 DataBuffer[]; /* Variable Length */ |
| } __packed; |
| |
| struct reparse_guid_data_buffer { |
| __le32 ReparseTag; |
| __le16 ReparseDataLength; |
| __u16 Reserved; |
| __u8 ReparseGuid[16]; |
| __u8 DataBuffer[]; /* Variable Length */ |
| } __packed; |
| |
| struct reparse_mount_point_data_buffer { |
| __le32 ReparseTag; |
| __le16 ReparseDataLength; |
| __u16 Reserved; |
| __le16 SubstituteNameOffset; |
| __le16 SubstituteNameLength; |
| __le16 PrintNameOffset; |
| __le16 PrintNameLength; |
| __u8 PathBuffer[]; /* Variable Length */ |
| } __packed; |
| |
| #define SYMLINK_FLAG_RELATIVE 0x00000001 |
| |
| struct reparse_symlink_data_buffer { |
| __le32 ReparseTag; |
| __le16 ReparseDataLength; |
| __u16 Reserved; |
| __le16 SubstituteNameOffset; |
| __le16 SubstituteNameLength; |
| __le16 PrintNameOffset; |
| __le16 PrintNameLength; |
| __le32 Flags; |
| __u8 PathBuffer[]; /* Variable Length */ |
| } __packed; |
| |
| /* See MS-FSCC 2.1.2.6 and cifspdu.h for struct reparse_posix_data */ |
| |
| struct validate_negotiate_info_req { |
| __le32 Capabilities; |
| __u8 Guid[SMB2_CLIENT_GUID_SIZE]; |
| __le16 SecurityMode; |
| __le16 DialectCount; |
| __le16 Dialects[4]; /* BB expand this if autonegotiate > 4 dialects */ |
| } __packed; |
| |
| struct validate_negotiate_info_rsp { |
| __le32 Capabilities; |
| __u8 Guid[SMB2_CLIENT_GUID_SIZE]; |
| __le16 SecurityMode; |
| __le16 Dialect; /* Dialect in use for the connection */ |
| } __packed; |
| |
| |
| /* Possible InfoType values */ |
| #define SMB2_O_INFO_FILE 0x01 |
| #define SMB2_O_INFO_FILESYSTEM 0x02 |
| #define SMB2_O_INFO_SECURITY 0x03 |
| #define SMB2_O_INFO_QUOTA 0x04 |
| |
| /* SMB2 Query Info see MS-SMB2 (2.2.37) or MS-DTYP */ |
| |
| /* List of QUERY INFO levels (those also valid for QUERY_DIR are noted below */ |
| #define FILE_DIRECTORY_INFORMATION 1 /* also for QUERY_DIR */ |
| #define FILE_FULL_DIRECTORY_INFORMATION 2 /* also for QUERY_DIR */ |
| #define FILE_BOTH_DIRECTORY_INFORMATION 3 /* also for QUERY_DIR */ |
| #define FILE_BASIC_INFORMATION 4 |
| #define FILE_STANDARD_INFORMATION 5 |
| #define FILE_INTERNAL_INFORMATION 6 |
| #define FILE_EA_INFORMATION 7 |
| #define FILE_ACCESS_INFORMATION 8 |
| #define FILE_NAME_INFORMATION 9 |
| #define FILE_RENAME_INFORMATION 10 |
| #define FILE_LINK_INFORMATION 11 |
| #define FILE_NAMES_INFORMATION 12 /* also for QUERY_DIR */ |
| #define FILE_DISPOSITION_INFORMATION 13 |
| #define FILE_POSITION_INFORMATION 14 |
| #define FILE_FULL_EA_INFORMATION 15 |
| #define FILE_MODE_INFORMATION 16 |
| #define FILE_ALIGNMENT_INFORMATION 17 |
| #define FILE_ALL_INFORMATION 18 |
| #define FILE_ALLOCATION_INFORMATION 19 |
| #define FILE_END_OF_FILE_INFORMATION 20 |
| #define FILE_ALTERNATE_NAME_INFORMATION 21 |
| #define FILE_STREAM_INFORMATION 22 |
| #define FILE_PIPE_INFORMATION 23 |
| #define FILE_PIPE_LOCAL_INFORMATION 24 |
| #define FILE_PIPE_REMOTE_INFORMATION 25 |
| #define FILE_MAILSLOT_QUERY_INFORMATION 26 |
| #define FILE_MAILSLOT_SET_INFORMATION 27 |
| #define FILE_COMPRESSION_INFORMATION 28 |
| #define FILE_OBJECT_ID_INFORMATION 29 |
| /* Number 30 not defined in documents */ |
| #define FILE_MOVE_CLUSTER_INFORMATION 31 |
| #define FILE_QUOTA_INFORMATION 32 |
| #define FILE_REPARSE_POINT_INFORMATION 33 |
| #define FILE_NETWORK_OPEN_INFORMATION 34 |
| #define FILE_ATTRIBUTE_TAG_INFORMATION 35 |
| #define FILE_TRACKING_INFORMATION 36 |
| #define FILEID_BOTH_DIRECTORY_INFORMATION 37 /* also for QUERY_DIR */ |
| #define FILEID_FULL_DIRECTORY_INFORMATION 38 /* also for QUERY_DIR */ |
| #define FILE_VALID_DATA_LENGTH_INFORMATION 39 |
| #define FILE_SHORT_NAME_INFORMATION 40 |
| #define FILE_SFIO_RESERVE_INFORMATION 44 |
| #define FILE_SFIO_VOLUME_INFORMATION 45 |
| #define FILE_HARD_LINK_INFORMATION 46 |
| #define FILE_NORMALIZED_NAME_INFORMATION 48 |
| #define FILEID_GLOBAL_TX_DIRECTORY_INFORMATION 50 |
| #define FILE_STANDARD_LINK_INFORMATION 54 |
| #define FILE_ID_INFORMATION 59 |
| #define FILE_ID_EXTD_DIRECTORY_INFORMATION 60 /* also for QUERY_DIR */ |
| /* Used for Query Info and Find File POSIX Info for SMB3.1.1 and SMB1 */ |
| #define SMB_FIND_FILE_POSIX_INFO 0x064 |
| |
| /* Security info type additionalinfo flags. */ |
| #define OWNER_SECINFO 0x00000001 |
| #define GROUP_SECINFO 0x00000002 |
| #define DACL_SECINFO 0x00000004 |
| #define SACL_SECINFO 0x00000008 |
| #define LABEL_SECINFO 0x00000010 |
| #define ATTRIBUTE_SECINFO 0x00000020 |
| #define SCOPE_SECINFO 0x00000040 |
| #define BACKUP_SECINFO 0x00010000 |
| #define UNPROTECTED_SACL_SECINFO 0x10000000 |
| #define UNPROTECTED_DACL_SECINFO 0x20000000 |
| #define PROTECTED_SACL_SECINFO 0x40000000 |
| #define PROTECTED_DACL_SECINFO 0x80000000 |
| |
| /* Flags used for FileFullEAinfo */ |
| #define SL_RESTART_SCAN 0x00000001 |
| #define SL_RETURN_SINGLE_ENTRY 0x00000002 |
| #define SL_INDEX_SPECIFIED 0x00000004 |
| |
| struct smb2_query_info_req { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 41 */ |
| __u8 InfoType; |
| __u8 FileInfoClass; |
| __le32 OutputBufferLength; |
| __le16 InputBufferOffset; |
| __u16 Reserved; |
| __le32 InputBufferLength; |
| __le32 AdditionalInformation; |
| __le32 Flags; |
| __u64 PersistentFileId; |
| __u64 VolatileFileId; |
| __u8 Buffer[]; |
| } __packed; |
| |
| struct smb2_query_info_rsp { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 9 */ |
| __le16 OutputBufferOffset; |
| __le32 OutputBufferLength; |
| __u8 Buffer[]; |
| } __packed; |
| |
| /* |
| * PDU query infolevel structure definitions |
| */ |
| |
| /* See MS-FSCC 2.3.52 */ |
| struct file_allocated_range_buffer { |
| __le64 file_offset; |
| __le64 length; |
| } __packed; |
| |
| struct smb2_file_internal_info { |
| __le64 IndexNumber; |
| } __packed; /* level 6 Query */ |
| |
| struct smb2_file_rename_info { /* encoding of request for level 10 */ |
| __u8 ReplaceIfExists; /* 1 = replace existing target with new */ |
| /* 0 = fail if target already exists */ |
| __u8 Reserved[7]; |
| __u64 RootDirectory; /* MBZ for network operations (why says spec?) */ |
| __le32 FileNameLength; |
| char FileName[]; /* New name to be assigned */ |
| /* padding - overall struct size must be >= 24 so filename + pad >= 6 */ |
| } __packed; /* level 10 Set */ |
| |
| struct smb2_file_link_info { /* encoding of request for level 11 */ |
| __u8 ReplaceIfExists; /* 1 = replace existing link with new */ |
| /* 0 = fail if link already exists */ |
| __u8 Reserved[7]; |
| __u64 RootDirectory; /* MBZ for network operations (why says spec?) */ |
| __le32 FileNameLength; |
| char FileName[]; /* Name to be assigned to new link */ |
| } __packed; /* level 11 Set */ |
| |
| /* |
| * This level 18, although with struct with same name is different from cifs |
| * level 0x107. Level 0x107 has an extra u64 between AccessFlags and |
| * CurrentByteOffset. |
| */ |
| struct smb2_file_all_info { /* data block encoding of response to level 18 */ |
| __le64 CreationTime; /* Beginning of FILE_BASIC_INFO equivalent */ |
| __le64 LastAccessTime; |
| __le64 LastWriteTime; |
| __le64 ChangeTime; |
| __le32 Attributes; |
| __u32 Pad1; /* End of FILE_BASIC_INFO_INFO equivalent */ |
| __le64 AllocationSize; /* Beginning of FILE_STANDARD_INFO equivalent */ |
| __le64 EndOfFile; /* size ie offset to first free byte in file */ |
| __le32 NumberOfLinks; /* hard links */ |
| __u8 DeletePending; |
| __u8 Directory; |
| __u16 Pad2; /* End of FILE_STANDARD_INFO equivalent */ |
| __le64 IndexNumber; |
| __le32 EASize; |
| __le32 AccessFlags; |
| __le64 CurrentByteOffset; |
| __le32 Mode; |
| __le32 AlignmentRequirement; |
| __le32 FileNameLength; |
| union { |
| char __pad; /* Legacy structure padding */ |
| DECLARE_FLEX_ARRAY(char, FileName); |
| }; |
| } __packed; /* level 18 Query */ |
| |
| struct smb2_file_eof_info { /* encoding of request for level 10 */ |
| __le64 EndOfFile; /* new end of file value */ |
| } __packed; /* level 20 Set */ |
| |
| /* Level 100 query info */ |
| struct smb311_posix_qinfo { |
| __le64 CreationTime; |
| __le64 LastAccessTime; |
| __le64 LastWriteTime; |
| __le64 ChangeTime; |
| __le64 EndOfFile; |
| __le64 AllocationSize; |
| __le32 DosAttributes; |
| __le64 Inode; |
| __le32 DeviceId; |
| __le32 Zero; |
| /* beginning of POSIX Create Context Response */ |
| __le32 HardLinks; |
| __le32 ReparseTag; |
| __le32 Mode; |
| u8 Sids[]; |
| /* |
| * var sized owner SID |
| * var sized group SID |
| * le32 filenamelength |
| * u8 filename[] |
| */ |
| } __packed; |
| |
| /* File System Information Classes */ |
| #define FS_VOLUME_INFORMATION 1 /* Query */ |
| #define FS_LABEL_INFORMATION 2 /* Set */ |
| #define FS_SIZE_INFORMATION 3 /* Query */ |
| #define FS_DEVICE_INFORMATION 4 /* Query */ |
| #define FS_ATTRIBUTE_INFORMATION 5 /* Query */ |
| #define FS_CONTROL_INFORMATION 6 /* Query, Set */ |
| #define FS_FULL_SIZE_INFORMATION 7 /* Query */ |
| #define FS_OBJECT_ID_INFORMATION 8 /* Query, Set */ |
| #define FS_DRIVER_PATH_INFORMATION 9 /* Query */ |
| #define FS_SECTOR_SIZE_INFORMATION 11 /* SMB3 or later. Query */ |
| #define FS_POSIX_INFORMATION 100 /* SMB3.1.1 POSIX. Query */ |
| |
| struct smb2_fs_full_size_info { |
| __le64 TotalAllocationUnits; |
| __le64 CallerAvailableAllocationUnits; |
| __le64 ActualAvailableAllocationUnits; |
| __le32 SectorsPerAllocationUnit; |
| __le32 BytesPerSector; |
| } __packed; |
| |
| #define SSINFO_FLAGS_ALIGNED_DEVICE 0x00000001 |
| #define SSINFO_FLAGS_PARTITION_ALIGNED_ON_DEVICE 0x00000002 |
| #define SSINFO_FLAGS_NO_SEEK_PENALTY 0x00000004 |
| #define SSINFO_FLAGS_TRIM_ENABLED 0x00000008 |
| |
| /* sector size info struct */ |
| struct smb3_fs_ss_info { |
| __le32 LogicalBytesPerSector; |
| __le32 PhysicalBytesPerSectorForAtomicity; |
| __le32 PhysicalBytesPerSectorForPerf; |
| __le32 FSEffPhysicalBytesPerSectorForAtomicity; |
| __le32 Flags; |
| __le32 ByteOffsetForSectorAlignment; |
| __le32 ByteOffsetForPartitionAlignment; |
| } __packed; |
| |
| /* File System Control Information */ |
| struct smb2_fs_control_info { |
| __le64 FreeSpaceStartFiltering; |
| __le64 FreeSpaceThreshold; |
| __le64 FreeSpaceStopFiltering; |
| __le64 DefaultQuotaThreshold; |
| __le64 DefaultQuotaLimit; |
| __le32 FileSystemControlFlags; |
| __le32 Padding; |
| } __packed; |
| |
| /* volume info struct - see MS-FSCC 2.5.9 */ |
| #define MAX_VOL_LABEL_LEN 32 |
| struct smb3_fs_vol_info { |
| __le64 VolumeCreationTime; |
| __u32 VolumeSerialNumber; |
| __le32 VolumeLabelLength; /* includes trailing null */ |
| __u8 SupportsObjects; /* True if eg like NTFS, supports objects */ |
| __u8 Reserved; |
| __u8 VolumeLabel[]; /* variable len */ |
| } __packed; |
| |
| /* See MS-SMB2 2.2.23 through 2.2.25 */ |
| struct smb2_oplock_break { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 24 */ |
| __u8 OplockLevel; |
| __u8 Reserved; |
| __le32 Reserved2; |
| __u64 PersistentFid; |
| __u64 VolatileFid; |
| } __packed; |
| |
| #define SMB2_NOTIFY_BREAK_LEASE_FLAG_ACK_REQUIRED cpu_to_le32(0x01) |
| |
| struct smb2_lease_break { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 44 */ |
| __le16 Epoch; |
| __le32 Flags; |
| __u8 LeaseKey[16]; |
| __le32 CurrentLeaseState; |
| __le32 NewLeaseState; |
| __le32 BreakReason; |
| __le32 AccessMaskHint; |
| __le32 ShareMaskHint; |
| } __packed; |
| |
| struct smb2_lease_ack { |
| struct smb2_hdr hdr; |
| __le16 StructureSize; /* Must be 36 */ |
| __le16 Reserved; |
| __le32 Flags; |
| __u8 LeaseKey[16]; |
| __le32 LeaseState; |
| __le64 LeaseDuration; |
| } __packed; |
| |
| #define OP_BREAK_STRUCT_SIZE_20 24 |
| #define OP_BREAK_STRUCT_SIZE_21 36 |
| #endif /* _COMMON_SMB2PDU_H */ |