| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2018 Linaro Limited, All rights reserved. |
| * Author: Mike Leach <mike.leach@linaro.org> |
| */ |
| |
| #include <linux/amba/bus.h> |
| #include <linux/atomic.h> |
| #include <linux/bits.h> |
| #include <linux/coresight.h> |
| #include <linux/cpu_pm.h> |
| #include <linux/cpuhotplug.h> |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/mutex.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/property.h> |
| #include <linux/spinlock.h> |
| |
| #include "coresight-priv.h" |
| #include "coresight-cti.h" |
| |
| /* |
| * CTI devices can be associated with a PE, or be connected to CoreSight |
| * hardware. We have a list of all CTIs irrespective of CPU bound or |
| * otherwise. |
| * |
| * We assume that the non-CPU CTIs are always powered as we do with sinks etc. |
| * |
| * We leave the client to figure out if all the CTIs are interconnected with |
| * the same CTM, in general this is the case but does not always have to be. |
| */ |
| |
| /* net of CTI devices connected via CTM */ |
| static LIST_HEAD(ect_net); |
| |
| /* protect the list */ |
| static DEFINE_MUTEX(ect_mutex); |
| |
| #define csdev_to_cti_drvdata(csdev) \ |
| dev_get_drvdata(csdev->dev.parent) |
| |
| /* power management handling */ |
| static int nr_cti_cpu; |
| |
| /* quick lookup list for CPU bound CTIs when power handling */ |
| static struct cti_drvdata *cti_cpu_drvdata[NR_CPUS]; |
| |
| /* |
| * CTI naming. CTI bound to cores will have the name cti_cpu<N> where |
| * N is the CPU ID. System CTIs will have the name cti_sys<I> where I |
| * is an index allocated by order of discovery. |
| * |
| * CTI device name list - for CTI not bound to cores. |
| */ |
| DEFINE_CORESIGHT_DEVLIST(cti_sys_devs, "cti_sys"); |
| |
| /* write set of regs to hardware - call with spinlock claimed */ |
| void cti_write_all_hw_regs(struct cti_drvdata *drvdata) |
| { |
| struct cti_config *config = &drvdata->config; |
| int i; |
| |
| CS_UNLOCK(drvdata->base); |
| |
| /* disable CTI before writing registers */ |
| writel_relaxed(0, drvdata->base + CTICONTROL); |
| |
| /* write the CTI trigger registers */ |
| for (i = 0; i < config->nr_trig_max; i++) { |
| writel_relaxed(config->ctiinen[i], drvdata->base + CTIINEN(i)); |
| writel_relaxed(config->ctiouten[i], |
| drvdata->base + CTIOUTEN(i)); |
| } |
| |
| /* other regs */ |
| writel_relaxed(config->ctigate, drvdata->base + CTIGATE); |
| writel_relaxed(config->asicctl, drvdata->base + ASICCTL); |
| writel_relaxed(config->ctiappset, drvdata->base + CTIAPPSET); |
| |
| /* re-enable CTI */ |
| writel_relaxed(1, drvdata->base + CTICONTROL); |
| |
| CS_LOCK(drvdata->base); |
| } |
| |
| /* write regs to hardware and enable */ |
| static int cti_enable_hw(struct cti_drvdata *drvdata) |
| { |
| struct cti_config *config = &drvdata->config; |
| unsigned long flags; |
| int rc = 0; |
| |
| spin_lock_irqsave(&drvdata->spinlock, flags); |
| |
| /* no need to do anything if enabled or unpowered*/ |
| if (config->hw_enabled || !config->hw_powered) |
| goto cti_state_unchanged; |
| |
| /* claim the device */ |
| rc = coresight_claim_device(drvdata->csdev); |
| if (rc) |
| goto cti_err_not_enabled; |
| |
| cti_write_all_hw_regs(drvdata); |
| |
| config->hw_enabled = true; |
| drvdata->config.enable_req_count++; |
| spin_unlock_irqrestore(&drvdata->spinlock, flags); |
| return rc; |
| |
| cti_state_unchanged: |
| drvdata->config.enable_req_count++; |
| |
| /* cannot enable due to error */ |
| cti_err_not_enabled: |
| spin_unlock_irqrestore(&drvdata->spinlock, flags); |
| return rc; |
| } |
| |
| /* re-enable CTI on CPU when using CPU hotplug */ |
| static void cti_cpuhp_enable_hw(struct cti_drvdata *drvdata) |
| { |
| struct cti_config *config = &drvdata->config; |
| |
| spin_lock(&drvdata->spinlock); |
| config->hw_powered = true; |
| |
| /* no need to do anything if no enable request */ |
| if (!drvdata->config.enable_req_count) |
| goto cti_hp_not_enabled; |
| |
| /* try to claim the device */ |
| if (coresight_claim_device(drvdata->csdev)) |
| goto cti_hp_not_enabled; |
| |
| cti_write_all_hw_regs(drvdata); |
| config->hw_enabled = true; |
| spin_unlock(&drvdata->spinlock); |
| return; |
| |
| /* did not re-enable due to no claim / no request */ |
| cti_hp_not_enabled: |
| spin_unlock(&drvdata->spinlock); |
| } |
| |
| /* disable hardware */ |
| static int cti_disable_hw(struct cti_drvdata *drvdata) |
| { |
| struct cti_config *config = &drvdata->config; |
| struct coresight_device *csdev = drvdata->csdev; |
| int ret = 0; |
| |
| spin_lock(&drvdata->spinlock); |
| |
| /* don't allow negative refcounts, return an error */ |
| if (!drvdata->config.enable_req_count) { |
| ret = -EINVAL; |
| goto cti_not_disabled; |
| } |
| |
| /* check refcount - disable on 0 */ |
| if (--drvdata->config.enable_req_count > 0) |
| goto cti_not_disabled; |
| |
| /* no need to do anything if disabled or cpu unpowered */ |
| if (!config->hw_enabled || !config->hw_powered) |
| goto cti_not_disabled; |
| |
| CS_UNLOCK(drvdata->base); |
| |
| /* disable CTI */ |
| writel_relaxed(0, drvdata->base + CTICONTROL); |
| config->hw_enabled = false; |
| |
| coresight_disclaim_device_unlocked(csdev); |
| CS_LOCK(drvdata->base); |
| spin_unlock(&drvdata->spinlock); |
| return ret; |
| |
| /* not disabled this call */ |
| cti_not_disabled: |
| spin_unlock(&drvdata->spinlock); |
| return ret; |
| } |
| |
| void cti_write_single_reg(struct cti_drvdata *drvdata, int offset, u32 value) |
| { |
| CS_UNLOCK(drvdata->base); |
| writel_relaxed(value, drvdata->base + offset); |
| CS_LOCK(drvdata->base); |
| } |
| |
| void cti_write_intack(struct device *dev, u32 ackval) |
| { |
| struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); |
| struct cti_config *config = &drvdata->config; |
| |
| spin_lock(&drvdata->spinlock); |
| /* write if enabled */ |
| if (cti_active(config)) |
| cti_write_single_reg(drvdata, CTIINTACK, ackval); |
| spin_unlock(&drvdata->spinlock); |
| } |
| |
| /* |
| * Look at the HW DEVID register for some of the HW settings. |
| * DEVID[15:8] - max number of in / out triggers. |
| */ |
| #define CTI_DEVID_MAXTRIGS(devid_val) ((int) BMVAL(devid_val, 8, 15)) |
| |
| /* DEVID[19:16] - number of CTM channels */ |
| #define CTI_DEVID_CTMCHANNELS(devid_val) ((int) BMVAL(devid_val, 16, 19)) |
| |
| static void cti_set_default_config(struct device *dev, |
| struct cti_drvdata *drvdata) |
| { |
| struct cti_config *config = &drvdata->config; |
| u32 devid; |
| |
| devid = readl_relaxed(drvdata->base + CORESIGHT_DEVID); |
| config->nr_trig_max = CTI_DEVID_MAXTRIGS(devid); |
| |
| /* |
| * no current hardware should exceed this, but protect the driver |
| * in case of fault / out of spec hw |
| */ |
| if (config->nr_trig_max > CTIINOUTEN_MAX) { |
| dev_warn_once(dev, |
| "Limiting HW MaxTrig value(%d) to driver max(%d)\n", |
| config->nr_trig_max, CTIINOUTEN_MAX); |
| config->nr_trig_max = CTIINOUTEN_MAX; |
| } |
| |
| config->nr_ctm_channels = CTI_DEVID_CTMCHANNELS(devid); |
| |
| /* Most regs default to 0 as zalloc'ed except...*/ |
| config->trig_filter_enable = true; |
| config->ctigate = GENMASK(config->nr_ctm_channels - 1, 0); |
| config->enable_req_count = 0; |
| } |
| |
| /* |
| * Add a connection entry to the list of connections for this |
| * CTI device. |
| */ |
| int cti_add_connection_entry(struct device *dev, struct cti_drvdata *drvdata, |
| struct cti_trig_con *tc, |
| struct coresight_device *csdev, |
| const char *assoc_dev_name) |
| { |
| struct cti_device *cti_dev = &drvdata->ctidev; |
| |
| tc->con_dev = csdev; |
| /* |
| * Prefer actual associated CS device dev name to supplied value - |
| * which is likely to be node name / other conn name. |
| */ |
| if (csdev) |
| tc->con_dev_name = dev_name(&csdev->dev); |
| else if (assoc_dev_name != NULL) { |
| tc->con_dev_name = devm_kstrdup(dev, |
| assoc_dev_name, GFP_KERNEL); |
| if (!tc->con_dev_name) |
| return -ENOMEM; |
| } |
| list_add_tail(&tc->node, &cti_dev->trig_cons); |
| cti_dev->nr_trig_con++; |
| |
| /* add connection usage bit info to overall info */ |
| drvdata->config.trig_in_use |= tc->con_in->used_mask; |
| drvdata->config.trig_out_use |= tc->con_out->used_mask; |
| |
| return 0; |
| } |
| |
| /* create a trigger connection with appropriately sized signal groups */ |
| struct cti_trig_con *cti_allocate_trig_con(struct device *dev, int in_sigs, |
| int out_sigs) |
| { |
| struct cti_trig_con *tc = NULL; |
| struct cti_trig_grp *in = NULL, *out = NULL; |
| |
| tc = devm_kzalloc(dev, sizeof(struct cti_trig_con), GFP_KERNEL); |
| if (!tc) |
| return tc; |
| |
| in = devm_kzalloc(dev, |
| offsetof(struct cti_trig_grp, sig_types[in_sigs]), |
| GFP_KERNEL); |
| if (!in) |
| return NULL; |
| |
| out = devm_kzalloc(dev, |
| offsetof(struct cti_trig_grp, sig_types[out_sigs]), |
| GFP_KERNEL); |
| if (!out) |
| return NULL; |
| |
| tc->con_in = in; |
| tc->con_out = out; |
| tc->con_in->nr_sigs = in_sigs; |
| tc->con_out->nr_sigs = out_sigs; |
| return tc; |
| } |
| |
| /* |
| * Add a default connection if nothing else is specified. |
| * single connection based on max in/out info, no assoc device |
| */ |
| int cti_add_default_connection(struct device *dev, struct cti_drvdata *drvdata) |
| { |
| int ret = 0; |
| int n_trigs = drvdata->config.nr_trig_max; |
| u32 n_trig_mask = GENMASK(n_trigs - 1, 0); |
| struct cti_trig_con *tc = NULL; |
| |
| /* |
| * Assume max trigs for in and out, |
| * all used, default sig types allocated |
| */ |
| tc = cti_allocate_trig_con(dev, n_trigs, n_trigs); |
| if (!tc) |
| return -ENOMEM; |
| |
| tc->con_in->used_mask = n_trig_mask; |
| tc->con_out->used_mask = n_trig_mask; |
| ret = cti_add_connection_entry(dev, drvdata, tc, NULL, "default"); |
| return ret; |
| } |
| |
| /** cti channel api **/ |
| /* attach/detach channel from trigger - write through if enabled. */ |
| int cti_channel_trig_op(struct device *dev, enum cti_chan_op op, |
| enum cti_trig_dir direction, u32 channel_idx, |
| u32 trigger_idx) |
| { |
| struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); |
| struct cti_config *config = &drvdata->config; |
| u32 trig_bitmask; |
| u32 chan_bitmask; |
| u32 reg_value; |
| int reg_offset; |
| |
| /* ensure indexes in range */ |
| if ((channel_idx >= config->nr_ctm_channels) || |
| (trigger_idx >= config->nr_trig_max)) |
| return -EINVAL; |
| |
| trig_bitmask = BIT(trigger_idx); |
| |
| /* ensure registered triggers and not out filtered */ |
| if (direction == CTI_TRIG_IN) { |
| if (!(trig_bitmask & config->trig_in_use)) |
| return -EINVAL; |
| } else { |
| if (!(trig_bitmask & config->trig_out_use)) |
| return -EINVAL; |
| |
| if ((config->trig_filter_enable) && |
| (config->trig_out_filter & trig_bitmask)) |
| return -EINVAL; |
| } |
| |
| /* update the local register values */ |
| chan_bitmask = BIT(channel_idx); |
| reg_offset = (direction == CTI_TRIG_IN ? CTIINEN(trigger_idx) : |
| CTIOUTEN(trigger_idx)); |
| |
| spin_lock(&drvdata->spinlock); |
| |
| /* read - modify write - the trigger / channel enable value */ |
| reg_value = direction == CTI_TRIG_IN ? config->ctiinen[trigger_idx] : |
| config->ctiouten[trigger_idx]; |
| if (op == CTI_CHAN_ATTACH) |
| reg_value |= chan_bitmask; |
| else |
| reg_value &= ~chan_bitmask; |
| |
| /* write local copy */ |
| if (direction == CTI_TRIG_IN) |
| config->ctiinen[trigger_idx] = reg_value; |
| else |
| config->ctiouten[trigger_idx] = reg_value; |
| |
| /* write through if enabled */ |
| if (cti_active(config)) |
| cti_write_single_reg(drvdata, reg_offset, reg_value); |
| spin_unlock(&drvdata->spinlock); |
| return 0; |
| } |
| |
| int cti_channel_gate_op(struct device *dev, enum cti_chan_gate_op op, |
| u32 channel_idx) |
| { |
| struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); |
| struct cti_config *config = &drvdata->config; |
| u32 chan_bitmask; |
| u32 reg_value; |
| int err = 0; |
| |
| if (channel_idx >= config->nr_ctm_channels) |
| return -EINVAL; |
| |
| chan_bitmask = BIT(channel_idx); |
| |
| spin_lock(&drvdata->spinlock); |
| reg_value = config->ctigate; |
| switch (op) { |
| case CTI_GATE_CHAN_ENABLE: |
| reg_value |= chan_bitmask; |
| break; |
| |
| case CTI_GATE_CHAN_DISABLE: |
| reg_value &= ~chan_bitmask; |
| break; |
| |
| default: |
| err = -EINVAL; |
| break; |
| } |
| if (err == 0) { |
| config->ctigate = reg_value; |
| if (cti_active(config)) |
| cti_write_single_reg(drvdata, CTIGATE, reg_value); |
| } |
| spin_unlock(&drvdata->spinlock); |
| return err; |
| } |
| |
| int cti_channel_setop(struct device *dev, enum cti_chan_set_op op, |
| u32 channel_idx) |
| { |
| struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); |
| struct cti_config *config = &drvdata->config; |
| u32 chan_bitmask; |
| u32 reg_value; |
| u32 reg_offset; |
| int err = 0; |
| |
| if (channel_idx >= config->nr_ctm_channels) |
| return -EINVAL; |
| |
| chan_bitmask = BIT(channel_idx); |
| |
| spin_lock(&drvdata->spinlock); |
| reg_value = config->ctiappset; |
| switch (op) { |
| case CTI_CHAN_SET: |
| config->ctiappset |= chan_bitmask; |
| reg_value = config->ctiappset; |
| reg_offset = CTIAPPSET; |
| break; |
| |
| case CTI_CHAN_CLR: |
| config->ctiappset &= ~chan_bitmask; |
| reg_value = chan_bitmask; |
| reg_offset = CTIAPPCLEAR; |
| break; |
| |
| case CTI_CHAN_PULSE: |
| config->ctiappset &= ~chan_bitmask; |
| reg_value = chan_bitmask; |
| reg_offset = CTIAPPPULSE; |
| break; |
| |
| default: |
| err = -EINVAL; |
| break; |
| } |
| |
| if ((err == 0) && cti_active(config)) |
| cti_write_single_reg(drvdata, reg_offset, reg_value); |
| spin_unlock(&drvdata->spinlock); |
| |
| return err; |
| } |
| |
| static bool cti_add_sysfs_link(struct cti_drvdata *drvdata, |
| struct cti_trig_con *tc) |
| { |
| struct coresight_sysfs_link link_info; |
| int link_err = 0; |
| |
| link_info.orig = drvdata->csdev; |
| link_info.orig_name = tc->con_dev_name; |
| link_info.target = tc->con_dev; |
| link_info.target_name = dev_name(&drvdata->csdev->dev); |
| |
| link_err = coresight_add_sysfs_link(&link_info); |
| if (link_err) |
| dev_warn(&drvdata->csdev->dev, |
| "Failed to set CTI sysfs link %s<=>%s\n", |
| link_info.orig_name, link_info.target_name); |
| return !link_err; |
| } |
| |
| static void cti_remove_sysfs_link(struct cti_drvdata *drvdata, |
| struct cti_trig_con *tc) |
| { |
| struct coresight_sysfs_link link_info; |
| |
| link_info.orig = drvdata->csdev; |
| link_info.orig_name = tc->con_dev_name; |
| link_info.target = tc->con_dev; |
| link_info.target_name = dev_name(&drvdata->csdev->dev); |
| coresight_remove_sysfs_link(&link_info); |
| } |
| |
| /* |
| * Look for a matching connection device name in the list of connections. |
| * If found then swap in the csdev name, set trig con association pointer |
| * and return found. |
| */ |
| static bool |
| cti_match_fixup_csdev(struct cti_device *ctidev, const char *node_name, |
| struct coresight_device *csdev) |
| { |
| struct cti_trig_con *tc; |
| struct cti_drvdata *drvdata = container_of(ctidev, struct cti_drvdata, |
| ctidev); |
| |
| list_for_each_entry(tc, &ctidev->trig_cons, node) { |
| if (tc->con_dev_name) { |
| if (!strcmp(node_name, tc->con_dev_name)) { |
| /* match: so swap in csdev name & dev */ |
| tc->con_dev_name = dev_name(&csdev->dev); |
| tc->con_dev = csdev; |
| /* try to set sysfs link */ |
| if (cti_add_sysfs_link(drvdata, tc)) |
| return true; |
| /* link failed - remove CTI reference */ |
| tc->con_dev = NULL; |
| break; |
| } |
| } |
| } |
| return false; |
| } |
| |
| /* |
| * Search the cti list to add an associated CTI into the supplied CS device |
| * This will set the association if CTI declared before the CS device. |
| * (called from coresight_register() without coresight_mutex locked). |
| */ |
| static void cti_add_assoc_to_csdev(struct coresight_device *csdev) |
| { |
| struct cti_drvdata *ect_item; |
| struct cti_device *ctidev; |
| const char *node_name = NULL; |
| |
| /* protect the list */ |
| mutex_lock(&ect_mutex); |
| |
| /* exit if current is an ECT device.*/ |
| if ((csdev->type == CORESIGHT_DEV_TYPE_HELPER && |
| csdev->subtype.helper_subtype == |
| CORESIGHT_DEV_SUBTYPE_HELPER_ECT_CTI) || |
| list_empty(&ect_net)) |
| goto cti_add_done; |
| |
| /* if we didn't find the csdev previously we used the fwnode name */ |
| node_name = cti_plat_get_node_name(dev_fwnode(csdev->dev.parent)); |
| if (!node_name) |
| goto cti_add_done; |
| |
| /* for each CTI in list... */ |
| list_for_each_entry(ect_item, &ect_net, node) { |
| ctidev = &ect_item->ctidev; |
| if (cti_match_fixup_csdev(ctidev, node_name, csdev)) { |
| /* |
| * if we found a matching csdev then update the ECT |
| * association pointer for the device with this CTI. |
| */ |
| coresight_add_helper(csdev, ect_item->csdev); |
| break; |
| } |
| } |
| cti_add_done: |
| mutex_unlock(&ect_mutex); |
| } |
| |
| /* |
| * Removing the associated devices is easier. |
| */ |
| static void cti_remove_assoc_from_csdev(struct coresight_device *csdev) |
| { |
| struct cti_drvdata *ctidrv; |
| struct cti_trig_con *tc; |
| struct cti_device *ctidev; |
| union coresight_dev_subtype cti_subtype = { |
| .helper_subtype = CORESIGHT_DEV_SUBTYPE_HELPER_ECT_CTI |
| }; |
| struct coresight_device *cti_csdev = coresight_find_output_type( |
| csdev->pdata, CORESIGHT_DEV_TYPE_HELPER, cti_subtype); |
| |
| if (!cti_csdev) |
| return; |
| |
| mutex_lock(&ect_mutex); |
| ctidrv = csdev_to_cti_drvdata(cti_csdev); |
| ctidev = &ctidrv->ctidev; |
| list_for_each_entry(tc, &ctidev->trig_cons, node) { |
| if (tc->con_dev == csdev) { |
| cti_remove_sysfs_link(ctidrv, tc); |
| tc->con_dev = NULL; |
| break; |
| } |
| } |
| mutex_unlock(&ect_mutex); |
| } |
| |
| /* |
| * Operations to add and remove associated CTI. |
| * Register to coresight core driver as call back function. |
| */ |
| static struct cti_assoc_op cti_assoc_ops = { |
| .add = cti_add_assoc_to_csdev, |
| .remove = cti_remove_assoc_from_csdev |
| }; |
| |
| /* |
| * Update the cross references where the associated device was found |
| * while we were building the connection info. This will occur if the |
| * assoc device was registered before the CTI. |
| */ |
| static void cti_update_conn_xrefs(struct cti_drvdata *drvdata) |
| { |
| struct cti_trig_con *tc; |
| struct cti_device *ctidev = &drvdata->ctidev; |
| |
| list_for_each_entry(tc, &ctidev->trig_cons, node) { |
| if (tc->con_dev) { |
| /* if we can set the sysfs link */ |
| if (cti_add_sysfs_link(drvdata, tc)) |
| /* set the CTI/csdev association */ |
| coresight_add_helper(tc->con_dev, |
| drvdata->csdev); |
| else |
| /* otherwise remove reference from CTI */ |
| tc->con_dev = NULL; |
| } |
| } |
| } |
| |
| static void cti_remove_conn_xrefs(struct cti_drvdata *drvdata) |
| { |
| struct cti_trig_con *tc; |
| struct cti_device *ctidev = &drvdata->ctidev; |
| |
| list_for_each_entry(tc, &ctidev->trig_cons, node) { |
| if (tc->con_dev) { |
| cti_remove_sysfs_link(drvdata, tc); |
| tc->con_dev = NULL; |
| } |
| } |
| } |
| |
| /** cti PM callbacks **/ |
| static int cti_cpu_pm_notify(struct notifier_block *nb, unsigned long cmd, |
| void *v) |
| { |
| struct cti_drvdata *drvdata; |
| struct coresight_device *csdev; |
| unsigned int cpu = smp_processor_id(); |
| int notify_res = NOTIFY_OK; |
| |
| if (!cti_cpu_drvdata[cpu]) |
| return NOTIFY_OK; |
| |
| drvdata = cti_cpu_drvdata[cpu]; |
| csdev = drvdata->csdev; |
| |
| if (WARN_ON_ONCE(drvdata->ctidev.cpu != cpu)) |
| return NOTIFY_BAD; |
| |
| spin_lock(&drvdata->spinlock); |
| |
| switch (cmd) { |
| case CPU_PM_ENTER: |
| /* CTI regs all static - we have a copy & nothing to save */ |
| drvdata->config.hw_powered = false; |
| if (drvdata->config.hw_enabled) |
| coresight_disclaim_device(csdev); |
| break; |
| |
| case CPU_PM_ENTER_FAILED: |
| drvdata->config.hw_powered = true; |
| if (drvdata->config.hw_enabled) { |
| if (coresight_claim_device(csdev)) |
| drvdata->config.hw_enabled = false; |
| } |
| break; |
| |
| case CPU_PM_EXIT: |
| /* write hardware registers to re-enable. */ |
| drvdata->config.hw_powered = true; |
| drvdata->config.hw_enabled = false; |
| |
| /* check enable reference count to enable HW */ |
| if (drvdata->config.enable_req_count) { |
| /* check we can claim the device as we re-power */ |
| if (coresight_claim_device(csdev)) |
| goto cti_notify_exit; |
| |
| drvdata->config.hw_enabled = true; |
| cti_write_all_hw_regs(drvdata); |
| } |
| break; |
| |
| default: |
| notify_res = NOTIFY_DONE; |
| break; |
| } |
| |
| cti_notify_exit: |
| spin_unlock(&drvdata->spinlock); |
| return notify_res; |
| } |
| |
| static struct notifier_block cti_cpu_pm_nb = { |
| .notifier_call = cti_cpu_pm_notify, |
| }; |
| |
| /* CPU HP handlers */ |
| static int cti_starting_cpu(unsigned int cpu) |
| { |
| struct cti_drvdata *drvdata = cti_cpu_drvdata[cpu]; |
| |
| if (!drvdata) |
| return 0; |
| |
| cti_cpuhp_enable_hw(drvdata); |
| return 0; |
| } |
| |
| static int cti_dying_cpu(unsigned int cpu) |
| { |
| struct cti_drvdata *drvdata = cti_cpu_drvdata[cpu]; |
| |
| if (!drvdata) |
| return 0; |
| |
| spin_lock(&drvdata->spinlock); |
| drvdata->config.hw_powered = false; |
| if (drvdata->config.hw_enabled) |
| coresight_disclaim_device(drvdata->csdev); |
| spin_unlock(&drvdata->spinlock); |
| return 0; |
| } |
| |
| static int cti_pm_setup(struct cti_drvdata *drvdata) |
| { |
| int ret; |
| |
| if (drvdata->ctidev.cpu == -1) |
| return 0; |
| |
| if (nr_cti_cpu) |
| goto done; |
| |
| cpus_read_lock(); |
| ret = cpuhp_setup_state_nocalls_cpuslocked( |
| CPUHP_AP_ARM_CORESIGHT_CTI_STARTING, |
| "arm/coresight_cti:starting", |
| cti_starting_cpu, cti_dying_cpu); |
| if (ret) { |
| cpus_read_unlock(); |
| return ret; |
| } |
| |
| ret = cpu_pm_register_notifier(&cti_cpu_pm_nb); |
| cpus_read_unlock(); |
| if (ret) { |
| cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_CTI_STARTING); |
| return ret; |
| } |
| |
| done: |
| nr_cti_cpu++; |
| cti_cpu_drvdata[drvdata->ctidev.cpu] = drvdata; |
| |
| return 0; |
| } |
| |
| /* release PM registrations */ |
| static void cti_pm_release(struct cti_drvdata *drvdata) |
| { |
| if (drvdata->ctidev.cpu == -1) |
| return; |
| |
| cti_cpu_drvdata[drvdata->ctidev.cpu] = NULL; |
| if (--nr_cti_cpu == 0) { |
| cpu_pm_unregister_notifier(&cti_cpu_pm_nb); |
| cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_CTI_STARTING); |
| } |
| } |
| |
| /** cti ect operations **/ |
| int cti_enable(struct coresight_device *csdev, enum cs_mode mode, void *data) |
| { |
| struct cti_drvdata *drvdata = csdev_to_cti_drvdata(csdev); |
| |
| return cti_enable_hw(drvdata); |
| } |
| |
| int cti_disable(struct coresight_device *csdev, void *data) |
| { |
| struct cti_drvdata *drvdata = csdev_to_cti_drvdata(csdev); |
| |
| return cti_disable_hw(drvdata); |
| } |
| |
| static const struct coresight_ops_helper cti_ops_ect = { |
| .enable = cti_enable, |
| .disable = cti_disable, |
| }; |
| |
| static const struct coresight_ops cti_ops = { |
| .helper_ops = &cti_ops_ect, |
| }; |
| |
| /* |
| * Free up CTI specific resources |
| * called by dev->release, need to call down to underlying csdev release. |
| */ |
| static void cti_device_release(struct device *dev) |
| { |
| struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); |
| struct cti_drvdata *ect_item, *ect_tmp; |
| |
| mutex_lock(&ect_mutex); |
| cti_pm_release(drvdata); |
| |
| /* remove from the list */ |
| list_for_each_entry_safe(ect_item, ect_tmp, &ect_net, node) { |
| if (ect_item == drvdata) { |
| list_del(&ect_item->node); |
| break; |
| } |
| } |
| mutex_unlock(&ect_mutex); |
| |
| if (drvdata->csdev_release) |
| drvdata->csdev_release(dev); |
| } |
| static void cti_remove(struct amba_device *adev) |
| { |
| struct cti_drvdata *drvdata = dev_get_drvdata(&adev->dev); |
| |
| mutex_lock(&ect_mutex); |
| cti_remove_conn_xrefs(drvdata); |
| mutex_unlock(&ect_mutex); |
| |
| coresight_unregister(drvdata->csdev); |
| } |
| |
| static int cti_probe(struct amba_device *adev, const struct amba_id *id) |
| { |
| int ret = 0; |
| void __iomem *base; |
| struct device *dev = &adev->dev; |
| struct cti_drvdata *drvdata = NULL; |
| struct coresight_desc cti_desc; |
| struct coresight_platform_data *pdata = NULL; |
| struct resource *res = &adev->res; |
| |
| /* driver data*/ |
| drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| /* Validity for the resource is already checked by the AMBA core */ |
| base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| drvdata->base = base; |
| cti_desc.access = CSDEV_ACCESS_IOMEM(base); |
| |
| dev_set_drvdata(dev, drvdata); |
| |
| /* default CTI device info */ |
| drvdata->ctidev.cpu = -1; |
| drvdata->ctidev.nr_trig_con = 0; |
| drvdata->ctidev.ctm_id = 0; |
| INIT_LIST_HEAD(&drvdata->ctidev.trig_cons); |
| |
| spin_lock_init(&drvdata->spinlock); |
| |
| /* initialise CTI driver config values */ |
| cti_set_default_config(dev, drvdata); |
| |
| pdata = coresight_cti_get_platform_data(dev); |
| if (IS_ERR(pdata)) { |
| dev_err(dev, "coresight_cti_get_platform_data err\n"); |
| return PTR_ERR(pdata); |
| } |
| |
| /* default to powered - could change on PM notifications */ |
| drvdata->config.hw_powered = true; |
| |
| /* set up device name - will depend if cpu bound or otherwise */ |
| if (drvdata->ctidev.cpu >= 0) |
| cti_desc.name = devm_kasprintf(dev, GFP_KERNEL, "cti_cpu%d", |
| drvdata->ctidev.cpu); |
| else |
| cti_desc.name = coresight_alloc_device_name(&cti_sys_devs, dev); |
| if (!cti_desc.name) |
| return -ENOMEM; |
| |
| /* setup CPU power management handling for CPU bound CTI devices. */ |
| ret = cti_pm_setup(drvdata); |
| if (ret) |
| return ret; |
| |
| /* create dynamic attributes for connections */ |
| ret = cti_create_cons_sysfs(dev, drvdata); |
| if (ret) { |
| dev_err(dev, "%s: create dynamic sysfs entries failed\n", |
| cti_desc.name); |
| goto pm_release; |
| } |
| |
| /* set up coresight component description */ |
| cti_desc.pdata = pdata; |
| cti_desc.type = CORESIGHT_DEV_TYPE_HELPER; |
| cti_desc.subtype.helper_subtype = CORESIGHT_DEV_SUBTYPE_HELPER_ECT_CTI; |
| cti_desc.ops = &cti_ops; |
| cti_desc.groups = drvdata->ctidev.con_groups; |
| cti_desc.dev = dev; |
| drvdata->csdev = coresight_register(&cti_desc); |
| if (IS_ERR(drvdata->csdev)) { |
| ret = PTR_ERR(drvdata->csdev); |
| goto pm_release; |
| } |
| |
| /* add to list of CTI devices */ |
| mutex_lock(&ect_mutex); |
| list_add(&drvdata->node, &ect_net); |
| /* set any cross references */ |
| cti_update_conn_xrefs(drvdata); |
| mutex_unlock(&ect_mutex); |
| |
| /* set up release chain */ |
| drvdata->csdev_release = drvdata->csdev->dev.release; |
| drvdata->csdev->dev.release = cti_device_release; |
| |
| /* all done - dec pm refcount */ |
| pm_runtime_put(&adev->dev); |
| dev_info(&drvdata->csdev->dev, "CTI initialized\n"); |
| return 0; |
| |
| pm_release: |
| cti_pm_release(drvdata); |
| return ret; |
| } |
| |
| static struct amba_cs_uci_id uci_id_cti[] = { |
| { |
| /* CTI UCI data */ |
| .devarch = 0x47701a14, /* CTI v2 */ |
| .devarch_mask = 0xfff0ffff, |
| .devtype = 0x00000014, /* maj(0x4-debug) min(0x1-ECT) */ |
| } |
| }; |
| |
| static const struct amba_id cti_ids[] = { |
| CS_AMBA_ID(0x000bb906), /* Coresight CTI (SoC 400), C-A72, C-A57 */ |
| CS_AMBA_ID(0x000bb922), /* CTI - C-A8 */ |
| CS_AMBA_ID(0x000bb9a8), /* CTI - C-A53 */ |
| CS_AMBA_ID(0x000bb9aa), /* CTI - C-A73 */ |
| CS_AMBA_UCI_ID(0x000bb9da, uci_id_cti), /* CTI - C-A35 */ |
| CS_AMBA_UCI_ID(0x000bb9ed, uci_id_cti), /* Coresight CTI (SoC 600) */ |
| { 0, 0}, |
| }; |
| |
| MODULE_DEVICE_TABLE(amba, cti_ids); |
| |
| static struct amba_driver cti_driver = { |
| .drv = { |
| .name = "coresight-cti", |
| .owner = THIS_MODULE, |
| .suppress_bind_attrs = true, |
| }, |
| .probe = cti_probe, |
| .remove = cti_remove, |
| .id_table = cti_ids, |
| }; |
| |
| static int __init cti_init(void) |
| { |
| int ret; |
| |
| ret = amba_driver_register(&cti_driver); |
| if (ret) |
| pr_info("Error registering cti driver\n"); |
| coresight_set_cti_ops(&cti_assoc_ops); |
| return ret; |
| } |
| |
| static void __exit cti_exit(void) |
| { |
| coresight_remove_cti_ops(); |
| amba_driver_unregister(&cti_driver); |
| } |
| |
| module_init(cti_init); |
| module_exit(cti_exit); |
| |
| MODULE_AUTHOR("Mike Leach <mike.leach@linaro.org>"); |
| MODULE_DESCRIPTION("Arm CoreSight CTI Driver"); |
| MODULE_LICENSE("GPL v2"); |