| ========================================================= |
| Notes on Analysing Behaviour Using Events and Tracepoints |
| ========================================================= |
| :Author: Mel Gorman (PCL information heavily based on email from Ingo Molnar) |
| |
| 1. Introduction |
| =============== |
| |
| Tracepoints (see Documentation/trace/tracepoints.txt) can be used without |
| creating custom kernel modules to register probe functions using the event |
| tracing infrastructure. |
| |
| Simplistically, tracepoints represent important events that can be |
| taken in conjunction with other tracepoints to build a "Big Picture" of |
| what is going on within the system. There are a large number of methods for |
| gathering and interpreting these events. Lacking any current Best Practises, |
| this document describes some of the methods that can be used. |
| |
| This document assumes that debugfs is mounted on /sys/kernel/debug and that |
| the appropriate tracing options have been configured into the kernel. It is |
| assumed that the PCL tool tools/perf has been installed and is in your path. |
| |
| 2. Listing Available Events |
| =========================== |
| |
| 2.1 Standard Utilities |
| ---------------------- |
| |
| All possible events are visible from /sys/kernel/debug/tracing/events. Simply |
| calling:: |
| |
| $ find /sys/kernel/debug/tracing/events -type d |
| |
| will give a fair indication of the number of events available. |
| |
| 2.2 PCL (Performance Counters for Linux) |
| ---------------------------------------- |
| |
| Discovery and enumeration of all counters and events, including tracepoints, |
| are available with the perf tool. Getting a list of available events is a |
| simple case of:: |
| |
| $ perf list 2>&1 | grep Tracepoint |
| ext4:ext4_free_inode [Tracepoint event] |
| ext4:ext4_request_inode [Tracepoint event] |
| ext4:ext4_allocate_inode [Tracepoint event] |
| ext4:ext4_write_begin [Tracepoint event] |
| ext4:ext4_ordered_write_end [Tracepoint event] |
| [ .... remaining output snipped .... ] |
| |
| |
| 3. Enabling Events |
| ================== |
| |
| 3.1 System-Wide Event Enabling |
| ------------------------------ |
| |
| See Documentation/trace/events.txt for a proper description on how events |
| can be enabled system-wide. A short example of enabling all events related |
| to page allocation would look something like:: |
| |
| $ for i in `find /sys/kernel/debug/tracing/events -name "enable" | grep mm_`; do echo 1 > $i; done |
| |
| 3.2 System-Wide Event Enabling with SystemTap |
| --------------------------------------------- |
| |
| In SystemTap, tracepoints are accessible using the kernel.trace() function |
| call. The following is an example that reports every 5 seconds what processes |
| were allocating the pages. |
| :: |
| |
| global page_allocs |
| |
| probe kernel.trace("mm_page_alloc") { |
| page_allocs[execname()]++ |
| } |
| |
| function print_count() { |
| printf ("%-25s %-s\n", "#Pages Allocated", "Process Name") |
| foreach (proc in page_allocs-) |
| printf("%-25d %s\n", page_allocs[proc], proc) |
| printf ("\n") |
| delete page_allocs |
| } |
| |
| probe timer.s(5) { |
| print_count() |
| } |
| |
| 3.3 System-Wide Event Enabling with PCL |
| --------------------------------------- |
| |
| By specifying the -a switch and analysing sleep, the system-wide events |
| for a duration of time can be examined. |
| :: |
| |
| $ perf stat -a \ |
| -e kmem:mm_page_alloc -e kmem:mm_page_free \ |
| -e kmem:mm_page_free_batched \ |
| sleep 10 |
| Performance counter stats for 'sleep 10': |
| |
| 9630 kmem:mm_page_alloc |
| 2143 kmem:mm_page_free |
| 7424 kmem:mm_page_free_batched |
| |
| 10.002577764 seconds time elapsed |
| |
| Similarly, one could execute a shell and exit it as desired to get a report |
| at that point. |
| |
| 3.4 Local Event Enabling |
| ------------------------ |
| |
| Documentation/trace/ftrace.txt describes how to enable events on a per-thread |
| basis using set_ftrace_pid. |
| |
| 3.5 Local Event Enablement with PCL |
| ----------------------------------- |
| |
| Events can be activated and tracked for the duration of a process on a local |
| basis using PCL such as follows. |
| :: |
| |
| $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free \ |
| -e kmem:mm_page_free_batched ./hackbench 10 |
| Time: 0.909 |
| |
| Performance counter stats for './hackbench 10': |
| |
| 17803 kmem:mm_page_alloc |
| 12398 kmem:mm_page_free |
| 4827 kmem:mm_page_free_batched |
| |
| 0.973913387 seconds time elapsed |
| |
| 4. Event Filtering |
| ================== |
| |
| Documentation/trace/ftrace.txt covers in-depth how to filter events in |
| ftrace. Obviously using grep and awk of trace_pipe is an option as well |
| as any script reading trace_pipe. |
| |
| 5. Analysing Event Variances with PCL |
| ===================================== |
| |
| Any workload can exhibit variances between runs and it can be important |
| to know what the standard deviation is. By and large, this is left to the |
| performance analyst to do it by hand. In the event that the discrete event |
| occurrences are useful to the performance analyst, then perf can be used. |
| :: |
| |
| $ perf stat --repeat 5 -e kmem:mm_page_alloc -e kmem:mm_page_free |
| -e kmem:mm_page_free_batched ./hackbench 10 |
| Time: 0.890 |
| Time: 0.895 |
| Time: 0.915 |
| Time: 1.001 |
| Time: 0.899 |
| |
| Performance counter stats for './hackbench 10' (5 runs): |
| |
| 16630 kmem:mm_page_alloc ( +- 3.542% ) |
| 11486 kmem:mm_page_free ( +- 4.771% ) |
| 4730 kmem:mm_page_free_batched ( +- 2.325% ) |
| |
| 0.982653002 seconds time elapsed ( +- 1.448% ) |
| |
| In the event that some higher-level event is required that depends on some |
| aggregation of discrete events, then a script would need to be developed. |
| |
| Using --repeat, it is also possible to view how events are fluctuating over |
| time on a system-wide basis using -a and sleep. |
| :: |
| |
| $ perf stat -e kmem:mm_page_alloc -e kmem:mm_page_free \ |
| -e kmem:mm_page_free_batched \ |
| -a --repeat 10 \ |
| sleep 1 |
| Performance counter stats for 'sleep 1' (10 runs): |
| |
| 1066 kmem:mm_page_alloc ( +- 26.148% ) |
| 182 kmem:mm_page_free ( +- 5.464% ) |
| 890 kmem:mm_page_free_batched ( +- 30.079% ) |
| |
| 1.002251757 seconds time elapsed ( +- 0.005% ) |
| |
| 6. Higher-Level Analysis with Helper Scripts |
| ============================================ |
| |
| When events are enabled the events that are triggering can be read from |
| /sys/kernel/debug/tracing/trace_pipe in human-readable format although binary |
| options exist as well. By post-processing the output, further information can |
| be gathered on-line as appropriate. Examples of post-processing might include |
| |
| - Reading information from /proc for the PID that triggered the event |
| - Deriving a higher-level event from a series of lower-level events. |
| - Calculating latencies between two events |
| |
| Documentation/trace/postprocess/trace-pagealloc-postprocess.pl is an example |
| script that can read trace_pipe from STDIN or a copy of a trace. When used |
| on-line, it can be interrupted once to generate a report without exiting |
| and twice to exit. |
| |
| Simplistically, the script just reads STDIN and counts up events but it |
| also can do more such as |
| |
| - Derive high-level events from many low-level events. If a number of pages |
| are freed to the main allocator from the per-CPU lists, it recognises |
| that as one per-CPU drain even though there is no specific tracepoint |
| for that event |
| - It can aggregate based on PID or individual process number |
| - In the event memory is getting externally fragmented, it reports |
| on whether the fragmentation event was severe or moderate. |
| - When receiving an event about a PID, it can record who the parent was so |
| that if large numbers of events are coming from very short-lived |
| processes, the parent process responsible for creating all the helpers |
| can be identified |
| |
| 7. Lower-Level Analysis with PCL |
| ================================ |
| |
| There may also be a requirement to identify what functions within a program |
| were generating events within the kernel. To begin this sort of analysis, the |
| data must be recorded. At the time of writing, this required root: |
| :: |
| |
| $ perf record -c 1 \ |
| -e kmem:mm_page_alloc -e kmem:mm_page_free \ |
| -e kmem:mm_page_free_batched \ |
| ./hackbench 10 |
| Time: 0.894 |
| [ perf record: Captured and wrote 0.733 MB perf.data (~32010 samples) ] |
| |
| Note the use of '-c 1' to set the event period to sample. The default sample |
| period is quite high to minimise overhead but the information collected can be |
| very coarse as a result. |
| |
| This record outputted a file called perf.data which can be analysed using |
| perf report. |
| :: |
| |
| $ perf report |
| # Samples: 30922 |
| # |
| # Overhead Command Shared Object |
| # ........ ......... ................................ |
| # |
| 87.27% hackbench [vdso] |
| 6.85% hackbench /lib/i686/cmov/libc-2.9.so |
| 2.62% hackbench /lib/ld-2.9.so |
| 1.52% perf [vdso] |
| 1.22% hackbench ./hackbench |
| 0.48% hackbench [kernel] |
| 0.02% perf /lib/i686/cmov/libc-2.9.so |
| 0.01% perf /usr/bin/perf |
| 0.01% perf /lib/ld-2.9.so |
| 0.00% hackbench /lib/i686/cmov/libpthread-2.9.so |
| # |
| # (For more details, try: perf report --sort comm,dso,symbol) |
| # |
| |
| According to this, the vast majority of events triggered on events |
| within the VDSO. With simple binaries, this will often be the case so let's |
| take a slightly different example. In the course of writing this, it was |
| noticed that X was generating an insane amount of page allocations so let's look |
| at it: |
| :: |
| |
| $ perf record -c 1 -f \ |
| -e kmem:mm_page_alloc -e kmem:mm_page_free \ |
| -e kmem:mm_page_free_batched \ |
| -p `pidof X` |
| |
| This was interrupted after a few seconds and |
| :: |
| |
| $ perf report |
| # Samples: 27666 |
| # |
| # Overhead Command Shared Object |
| # ........ ....... ....................................... |
| # |
| 51.95% Xorg [vdso] |
| 47.95% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 |
| 0.09% Xorg /lib/i686/cmov/libc-2.9.so |
| 0.01% Xorg [kernel] |
| # |
| # (For more details, try: perf report --sort comm,dso,symbol) |
| # |
| |
| So, almost half of the events are occurring in a library. To get an idea which |
| symbol: |
| :: |
| |
| $ perf report --sort comm,dso,symbol |
| # Samples: 27666 |
| # |
| # Overhead Command Shared Object Symbol |
| # ........ ....... ....................................... ...... |
| # |
| 51.95% Xorg [vdso] [.] 0x000000ffffe424 |
| 47.93% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] pixmanFillsse2 |
| 0.09% Xorg /lib/i686/cmov/libc-2.9.so [.] _int_malloc |
| 0.01% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] pixman_region32_copy_f |
| 0.01% Xorg [kernel] [k] read_hpet |
| 0.01% Xorg /opt/gfx-test/lib/libpixman-1.so.0.13.1 [.] get_fast_path |
| 0.00% Xorg [kernel] [k] ftrace_trace_userstack |
| |
| To see where within the function pixmanFillsse2 things are going wrong: |
| :: |
| |
| $ perf annotate pixmanFillsse2 |
| [ ... ] |
| 0.00 : 34eeb: 0f 18 08 prefetcht0 (%eax) |
| : } |
| : |
| : extern __inline void __attribute__((__gnu_inline__, __always_inline__, _ |
| : _mm_store_si128 (__m128i *__P, __m128i __B) : { |
| : *__P = __B; |
| 12.40 : 34eee: 66 0f 7f 80 40 ff ff movdqa %xmm0,-0xc0(%eax) |
| 0.00 : 34ef5: ff |
| 12.40 : 34ef6: 66 0f 7f 80 50 ff ff movdqa %xmm0,-0xb0(%eax) |
| 0.00 : 34efd: ff |
| 12.39 : 34efe: 66 0f 7f 80 60 ff ff movdqa %xmm0,-0xa0(%eax) |
| 0.00 : 34f05: ff |
| 12.67 : 34f06: 66 0f 7f 80 70 ff ff movdqa %xmm0,-0x90(%eax) |
| 0.00 : 34f0d: ff |
| 12.58 : 34f0e: 66 0f 7f 40 80 movdqa %xmm0,-0x80(%eax) |
| 12.31 : 34f13: 66 0f 7f 40 90 movdqa %xmm0,-0x70(%eax) |
| 12.40 : 34f18: 66 0f 7f 40 a0 movdqa %xmm0,-0x60(%eax) |
| 12.31 : 34f1d: 66 0f 7f 40 b0 movdqa %xmm0,-0x50(%eax) |
| |
| At a glance, it looks like the time is being spent copying pixmaps to |
| the card. Further investigation would be needed to determine why pixmaps |
| are being copied around so much but a starting point would be to take an |
| ancient build of libpixmap out of the library path where it was totally |
| forgotten about from months ago! |
