| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Motorola CPCAP PMIC battery charger driver |
| * |
| * Copyright (C) 2017 Tony Lindgren <tony@atomide.com> |
| * |
| * Rewritten for Linux power framework with some parts based on |
| * on earlier driver found in the Motorola Linux kernel: |
| * |
| * Copyright (C) 2009-2010 Motorola, Inc. |
| */ |
| |
| #include <linux/atomic.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/notifier.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/usb/phy_companion.h> |
| #include <linux/phy/omap_usb.h> |
| #include <linux/usb/otg.h> |
| #include <linux/iio/consumer.h> |
| #include <linux/mfd/motorola-cpcap.h> |
| |
| /* |
| * CPCAP_REG_CRM register bits. For documentation of somewhat similar hardware, |
| * see NXP "MC13783 Power Management and Audio Circuit Users's Guide" |
| * MC13783UG.pdf chapter "8.5 Battery Interface Register Summary". The registers |
| * and values for CPCAP are different, but some of the internal components seem |
| * similar. Also see the Motorola Linux kernel cpcap-regbits.h. CPCAP_REG_CHRGR_1 |
| * bits that seem to describe the CRM register. |
| */ |
| #define CPCAP_REG_CRM_UNUSED_641_15 BIT(15) /* 641 = register number */ |
| #define CPCAP_REG_CRM_UNUSED_641_14 BIT(14) /* 641 = register number */ |
| #define CPCAP_REG_CRM_CHRG_LED_EN BIT(13) /* Charger LED */ |
| #define CPCAP_REG_CRM_RVRSMODE BIT(12) /* USB VBUS output enable */ |
| #define CPCAP_REG_CRM_ICHRG_TR1 BIT(11) /* Trickle charge current */ |
| #define CPCAP_REG_CRM_ICHRG_TR0 BIT(10) |
| #define CPCAP_REG_CRM_FET_OVRD BIT(9) /* 0 = hardware, 1 = FET_CTRL */ |
| #define CPCAP_REG_CRM_FET_CTRL BIT(8) /* BPFET 1 if FET_OVRD set */ |
| #define CPCAP_REG_CRM_VCHRG3 BIT(7) /* Charge voltage bits */ |
| #define CPCAP_REG_CRM_VCHRG2 BIT(6) |
| #define CPCAP_REG_CRM_VCHRG1 BIT(5) |
| #define CPCAP_REG_CRM_VCHRG0 BIT(4) |
| #define CPCAP_REG_CRM_ICHRG3 BIT(3) /* Charge current bits */ |
| #define CPCAP_REG_CRM_ICHRG2 BIT(2) |
| #define CPCAP_REG_CRM_ICHRG1 BIT(1) |
| #define CPCAP_REG_CRM_ICHRG0 BIT(0) |
| |
| /* CPCAP_REG_CRM trickle charge voltages */ |
| #define CPCAP_REG_CRM_TR(val) (((val) & 0x3) << 10) |
| #define CPCAP_REG_CRM_TR_0A00 CPCAP_REG_CRM_TR(0x0) |
| #define CPCAP_REG_CRM_TR_0A24 CPCAP_REG_CRM_TR(0x1) |
| #define CPCAP_REG_CRM_TR_0A48 CPCAP_REG_CRM_TR(0x2) |
| #define CPCAP_REG_CRM_TR_0A72 CPCAP_REG_CRM_TR(0x4) |
| |
| /* |
| * CPCAP_REG_CRM charge voltages based on the ADC channel 1 values. |
| * Note that these register bits don't match MC13783UG.pdf VCHRG |
| * register bits. |
| */ |
| #define CPCAP_REG_CRM_VCHRG(val) (((val) & 0xf) << 4) |
| #define CPCAP_REG_CRM_VCHRG_3V80 CPCAP_REG_CRM_VCHRG(0x0) |
| #define CPCAP_REG_CRM_VCHRG_4V10 CPCAP_REG_CRM_VCHRG(0x1) |
| #define CPCAP_REG_CRM_VCHRG_4V12 CPCAP_REG_CRM_VCHRG(0x2) |
| #define CPCAP_REG_CRM_VCHRG_4V15 CPCAP_REG_CRM_VCHRG(0x3) |
| #define CPCAP_REG_CRM_VCHRG_4V17 CPCAP_REG_CRM_VCHRG(0x4) |
| #define CPCAP_REG_CRM_VCHRG_4V20 CPCAP_REG_CRM_VCHRG(0x5) |
| #define CPCAP_REG_CRM_VCHRG_4V23 CPCAP_REG_CRM_VCHRG(0x6) |
| #define CPCAP_REG_CRM_VCHRG_4V25 CPCAP_REG_CRM_VCHRG(0x7) |
| #define CPCAP_REG_CRM_VCHRG_4V27 CPCAP_REG_CRM_VCHRG(0x8) |
| #define CPCAP_REG_CRM_VCHRG_4V30 CPCAP_REG_CRM_VCHRG(0x9) |
| #define CPCAP_REG_CRM_VCHRG_4V33 CPCAP_REG_CRM_VCHRG(0xa) |
| #define CPCAP_REG_CRM_VCHRG_4V35 CPCAP_REG_CRM_VCHRG(0xb) |
| #define CPCAP_REG_CRM_VCHRG_4V38 CPCAP_REG_CRM_VCHRG(0xc) |
| #define CPCAP_REG_CRM_VCHRG_4V40 CPCAP_REG_CRM_VCHRG(0xd) |
| #define CPCAP_REG_CRM_VCHRG_4V42 CPCAP_REG_CRM_VCHRG(0xe) |
| #define CPCAP_REG_CRM_VCHRG_4V44 CPCAP_REG_CRM_VCHRG(0xf) |
| |
| /* |
| * CPCAP_REG_CRM charge currents. These seem to match MC13783UG.pdf |
| * values in "Table 8-3. Charge Path Regulator Current Limit |
| * Characteristics" for the nominal values. |
| * |
| * Except 70mA and 1.596A and unlimited, these are simply 88.7mA / step. |
| */ |
| #define CPCAP_REG_CRM_ICHRG(val) (((val) & 0xf) << 0) |
| #define CPCAP_REG_CRM_ICHRG_0A000 CPCAP_REG_CRM_ICHRG(0x0) |
| #define CPCAP_REG_CRM_ICHRG_0A070 CPCAP_REG_CRM_ICHRG(0x1) |
| #define CPCAP_REG_CRM_ICHRG_0A177 CPCAP_REG_CRM_ICHRG(0x2) |
| #define CPCAP_REG_CRM_ICHRG_0A266 CPCAP_REG_CRM_ICHRG(0x3) |
| #define CPCAP_REG_CRM_ICHRG_0A355 CPCAP_REG_CRM_ICHRG(0x4) |
| #define CPCAP_REG_CRM_ICHRG_0A443 CPCAP_REG_CRM_ICHRG(0x5) |
| #define CPCAP_REG_CRM_ICHRG_0A532 CPCAP_REG_CRM_ICHRG(0x6) |
| #define CPCAP_REG_CRM_ICHRG_0A621 CPCAP_REG_CRM_ICHRG(0x7) |
| #define CPCAP_REG_CRM_ICHRG_0A709 CPCAP_REG_CRM_ICHRG(0x8) |
| #define CPCAP_REG_CRM_ICHRG_0A798 CPCAP_REG_CRM_ICHRG(0x9) |
| #define CPCAP_REG_CRM_ICHRG_0A886 CPCAP_REG_CRM_ICHRG(0xa) |
| #define CPCAP_REG_CRM_ICHRG_0A975 CPCAP_REG_CRM_ICHRG(0xb) |
| #define CPCAP_REG_CRM_ICHRG_1A064 CPCAP_REG_CRM_ICHRG(0xc) |
| #define CPCAP_REG_CRM_ICHRG_1A152 CPCAP_REG_CRM_ICHRG(0xd) |
| #define CPCAP_REG_CRM_ICHRG_1A596 CPCAP_REG_CRM_ICHRG(0xe) |
| #define CPCAP_REG_CRM_ICHRG_NO_LIMIT CPCAP_REG_CRM_ICHRG(0xf) |
| |
| /* CPCAP_REG_VUSBC register bits needed for VBUS */ |
| #define CPCAP_BIT_VBUS_SWITCH BIT(0) /* VBUS boost to 5V */ |
| |
| enum { |
| CPCAP_CHARGER_IIO_BATTDET, |
| CPCAP_CHARGER_IIO_VOLTAGE, |
| CPCAP_CHARGER_IIO_VBUS, |
| CPCAP_CHARGER_IIO_CHRG_CURRENT, |
| CPCAP_CHARGER_IIO_BATT_CURRENT, |
| CPCAP_CHARGER_IIO_NR, |
| }; |
| |
| struct cpcap_charger_ddata { |
| struct device *dev; |
| struct regmap *reg; |
| struct list_head irq_list; |
| struct delayed_work detect_work; |
| struct delayed_work vbus_work; |
| struct gpio_desc *gpio[2]; /* gpio_reven0 & 1 */ |
| |
| struct iio_channel *channels[CPCAP_CHARGER_IIO_NR]; |
| |
| struct power_supply *usb; |
| |
| struct phy_companion comparator; /* For USB VBUS */ |
| unsigned int vbus_enabled:1; |
| unsigned int feeding_vbus:1; |
| atomic_t active; |
| |
| int status; |
| int voltage; |
| int limit_current; |
| }; |
| |
| struct cpcap_interrupt_desc { |
| int irq; |
| struct list_head node; |
| const char *name; |
| }; |
| |
| struct cpcap_charger_ints_state { |
| bool chrg_det; |
| bool rvrs_chrg; |
| bool vbusov; |
| |
| bool chrg_se1b; |
| bool rvrs_mode; |
| bool chrgcurr2; |
| bool chrgcurr1; |
| bool vbusvld; |
| |
| bool battdetb; |
| }; |
| |
| static enum power_supply_property cpcap_charger_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| }; |
| |
| /* No battery always shows temperature of -40000 */ |
| static bool cpcap_charger_battery_found(struct cpcap_charger_ddata *ddata) |
| { |
| struct iio_channel *channel; |
| int error, temperature; |
| |
| channel = ddata->channels[CPCAP_CHARGER_IIO_BATTDET]; |
| error = iio_read_channel_processed(channel, &temperature); |
| if (error < 0) { |
| dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); |
| |
| return false; |
| } |
| |
| return temperature > -20000 && temperature < 60000; |
| } |
| |
| static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata) |
| { |
| struct iio_channel *channel; |
| int error, value = 0; |
| |
| channel = ddata->channels[CPCAP_CHARGER_IIO_VOLTAGE]; |
| error = iio_read_channel_processed(channel, &value); |
| if (error < 0) { |
| dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); |
| |
| return 0; |
| } |
| |
| return value; |
| } |
| |
| static int cpcap_charger_get_charge_current(struct cpcap_charger_ddata *ddata) |
| { |
| struct iio_channel *channel; |
| int error, value = 0; |
| |
| channel = ddata->channels[CPCAP_CHARGER_IIO_CHRG_CURRENT]; |
| error = iio_read_channel_processed(channel, &value); |
| if (error < 0) { |
| dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); |
| |
| return 0; |
| } |
| |
| return value; |
| } |
| |
| static int cpcap_charger_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = ddata->status; |
| break; |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| val->intval = ddata->limit_current; |
| break; |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| val->intval = ddata->voltage; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| if (ddata->status == POWER_SUPPLY_STATUS_CHARGING) |
| val->intval = cpcap_charger_get_charge_voltage(ddata) * |
| 1000; |
| else |
| val->intval = 0; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| if (ddata->status == POWER_SUPPLY_STATUS_CHARGING) |
| val->intval = cpcap_charger_get_charge_current(ddata) * |
| 1000; |
| else |
| val->intval = 0; |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = ddata->status == POWER_SUPPLY_STATUS_CHARGING; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int cpcap_charger_match_voltage(int voltage) |
| { |
| switch (voltage) { |
| case 0 ... 4100000 - 1: return 3800000; |
| case 4100000 ... 4120000 - 1: return 4100000; |
| case 4120000 ... 4150000 - 1: return 4120000; |
| case 4150000 ... 4170000 - 1: return 4150000; |
| case 4170000 ... 4200000 - 1: return 4170000; |
| case 4200000 ... 4230000 - 1: return 4200000; |
| case 4230000 ... 4250000 - 1: return 4230000; |
| case 4250000 ... 4270000 - 1: return 4250000; |
| case 4270000 ... 4300000 - 1: return 4270000; |
| case 4300000 ... 4330000 - 1: return 4300000; |
| case 4330000 ... 4350000 - 1: return 4330000; |
| case 4350000 ... 4380000 - 1: return 4350000; |
| case 4380000 ... 4400000 - 1: return 4380000; |
| case 4400000 ... 4420000 - 1: return 4400000; |
| case 4420000 ... 4440000 - 1: return 4420000; |
| case 4440000: return 4440000; |
| default: return 0; |
| } |
| } |
| |
| static int |
| cpcap_charger_get_bat_const_charge_voltage(struct cpcap_charger_ddata *ddata) |
| { |
| union power_supply_propval prop; |
| struct power_supply *battery; |
| int voltage = ddata->voltage; |
| int error; |
| |
| battery = power_supply_get_by_name("battery"); |
| if (battery) { |
| error = power_supply_get_property(battery, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| &prop); |
| if (!error) |
| voltage = prop.intval; |
| |
| power_supply_put(battery); |
| } |
| |
| return voltage; |
| } |
| |
| static int cpcap_charger_current_to_regval(int microamp) |
| { |
| int miliamp = microamp / 1000; |
| int res; |
| |
| if (miliamp < 0) |
| return -EINVAL; |
| if (miliamp < 70) |
| return CPCAP_REG_CRM_ICHRG(0x0); |
| if (miliamp < 177) |
| return CPCAP_REG_CRM_ICHRG(0x1); |
| if (miliamp > 1596) |
| return CPCAP_REG_CRM_ICHRG(0xe); |
| |
| res = microamp / 88666; |
| if (res > 0xd) |
| res = 0xd; |
| return CPCAP_REG_CRM_ICHRG(res); |
| } |
| |
| static int cpcap_charger_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent); |
| int voltage, batvolt; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| if (cpcap_charger_current_to_regval(val->intval) < 0) |
| return -EINVAL; |
| ddata->limit_current = val->intval; |
| schedule_delayed_work(&ddata->detect_work, 0); |
| break; |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| voltage = cpcap_charger_match_voltage(val->intval); |
| batvolt = cpcap_charger_get_bat_const_charge_voltage(ddata); |
| if (voltage > batvolt) |
| voltage = batvolt; |
| ddata->voltage = voltage; |
| schedule_delayed_work(&ddata->detect_work, 0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int cpcap_charger_property_is_writeable(struct power_supply *psy, |
| enum power_supply_property psp) |
| { |
| switch (psp) { |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static void cpcap_charger_set_cable_path(struct cpcap_charger_ddata *ddata, |
| bool enabled) |
| { |
| if (!ddata->gpio[0]) |
| return; |
| |
| gpiod_set_value(ddata->gpio[0], enabled); |
| } |
| |
| static void cpcap_charger_set_inductive_path(struct cpcap_charger_ddata *ddata, |
| bool enabled) |
| { |
| if (!ddata->gpio[1]) |
| return; |
| |
| gpiod_set_value(ddata->gpio[1], enabled); |
| } |
| |
| static void cpcap_charger_update_state(struct cpcap_charger_ddata *ddata, |
| int state) |
| { |
| const char *status; |
| |
| if (state > POWER_SUPPLY_STATUS_FULL) { |
| dev_warn(ddata->dev, "unknown state: %i\n", state); |
| |
| return; |
| } |
| |
| ddata->status = state; |
| |
| switch (state) { |
| case POWER_SUPPLY_STATUS_DISCHARGING: |
| status = "DISCONNECTED"; |
| break; |
| case POWER_SUPPLY_STATUS_NOT_CHARGING: |
| status = "DETECTING"; |
| break; |
| case POWER_SUPPLY_STATUS_CHARGING: |
| status = "CHARGING"; |
| break; |
| case POWER_SUPPLY_STATUS_FULL: |
| status = "DONE"; |
| break; |
| default: |
| return; |
| } |
| |
| dev_dbg(ddata->dev, "state: %s\n", status); |
| } |
| |
| static int cpcap_charger_disable(struct cpcap_charger_ddata *ddata) |
| { |
| int error; |
| |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff, |
| CPCAP_REG_CRM_FET_OVRD | |
| CPCAP_REG_CRM_FET_CTRL); |
| if (error) |
| dev_err(ddata->dev, "%s failed with %i\n", __func__, error); |
| |
| return error; |
| } |
| |
| static int cpcap_charger_enable(struct cpcap_charger_ddata *ddata, |
| int max_voltage, int charge_current, |
| int trickle_current) |
| { |
| int error; |
| |
| if (!max_voltage || !charge_current) |
| return -EINVAL; |
| |
| dev_dbg(ddata->dev, "enable: %i %i %i\n", |
| max_voltage, charge_current, trickle_current); |
| |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff, |
| CPCAP_REG_CRM_CHRG_LED_EN | |
| trickle_current | |
| CPCAP_REG_CRM_FET_OVRD | |
| CPCAP_REG_CRM_FET_CTRL | |
| max_voltage | |
| charge_current); |
| if (error) |
| dev_err(ddata->dev, "%s failed with %i\n", __func__, error); |
| |
| return error; |
| } |
| |
| static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata) |
| { |
| int error, value = 0; |
| struct iio_channel *channel = |
| ddata->channels[CPCAP_CHARGER_IIO_VBUS]; |
| |
| error = iio_read_channel_processed(channel, &value); |
| if (error >= 0) |
| return value > 3900 ? true : false; |
| |
| dev_err(ddata->dev, "error reading VBUS: %i\n", error); |
| |
| return false; |
| } |
| |
| /* VBUS control functions for the USB PHY companion */ |
| static void cpcap_charger_vbus_work(struct work_struct *work) |
| { |
| struct cpcap_charger_ddata *ddata; |
| bool vbus = false; |
| int error; |
| |
| ddata = container_of(work, struct cpcap_charger_ddata, |
| vbus_work.work); |
| |
| if (ddata->vbus_enabled) { |
| vbus = cpcap_charger_vbus_valid(ddata); |
| if (vbus) { |
| dev_dbg(ddata->dev, "VBUS already provided\n"); |
| |
| return; |
| } |
| |
| ddata->feeding_vbus = true; |
| cpcap_charger_set_cable_path(ddata, false); |
| cpcap_charger_set_inductive_path(ddata, false); |
| |
| error = cpcap_charger_disable(ddata); |
| if (error) |
| goto out_err; |
| |
| cpcap_charger_update_state(ddata, |
| POWER_SUPPLY_STATUS_DISCHARGING); |
| |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC, |
| CPCAP_BIT_VBUS_SWITCH, |
| CPCAP_BIT_VBUS_SWITCH); |
| if (error) |
| goto out_err; |
| |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, |
| CPCAP_REG_CRM_RVRSMODE, |
| CPCAP_REG_CRM_RVRSMODE); |
| if (error) |
| goto out_err; |
| } else { |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC, |
| CPCAP_BIT_VBUS_SWITCH, 0); |
| if (error) |
| goto out_err; |
| |
| error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, |
| CPCAP_REG_CRM_RVRSMODE, 0); |
| if (error) |
| goto out_err; |
| |
| cpcap_charger_set_cable_path(ddata, true); |
| cpcap_charger_set_inductive_path(ddata, true); |
| ddata->feeding_vbus = false; |
| } |
| |
| return; |
| |
| out_err: |
| cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN); |
| dev_err(ddata->dev, "%s could not %s vbus: %i\n", __func__, |
| ddata->vbus_enabled ? "enable" : "disable", error); |
| } |
| |
| static int cpcap_charger_set_vbus(struct phy_companion *comparator, |
| bool enabled) |
| { |
| struct cpcap_charger_ddata *ddata = |
| container_of(comparator, struct cpcap_charger_ddata, |
| comparator); |
| |
| ddata->vbus_enabled = enabled; |
| schedule_delayed_work(&ddata->vbus_work, 0); |
| |
| return 0; |
| } |
| |
| /* Charger interrupt handling functions */ |
| |
| static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata, |
| struct cpcap_charger_ints_state *s) |
| { |
| int val, error; |
| |
| error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val); |
| if (error) |
| return error; |
| |
| s->chrg_det = val & BIT(13); |
| s->rvrs_chrg = val & BIT(12); |
| s->vbusov = val & BIT(11); |
| |
| error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val); |
| if (error) |
| return error; |
| |
| s->chrg_se1b = val & BIT(13); |
| s->rvrs_mode = val & BIT(6); |
| s->chrgcurr2 = val & BIT(5); |
| s->chrgcurr1 = val & BIT(4); |
| s->vbusvld = val & BIT(3); |
| |
| error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val); |
| if (error) |
| return error; |
| |
| s->battdetb = val & BIT(6); |
| |
| return 0; |
| } |
| |
| static int cpcap_charger_voltage_to_regval(int voltage) |
| { |
| int offset; |
| |
| switch (voltage) { |
| case 0 ... 4100000 - 1: |
| return 0; |
| case 4100000 ... 4200000 - 1: |
| offset = 1; |
| break; |
| case 4200000 ... 4300000 - 1: |
| offset = 0; |
| break; |
| case 4300000 ... 4380000 - 1: |
| offset = -1; |
| break; |
| case 4380000 ... 4440000: |
| offset = -2; |
| break; |
| default: |
| return 0; |
| } |
| |
| return ((voltage - 4100000) / 20000) + offset; |
| } |
| |
| static void cpcap_charger_disconnect(struct cpcap_charger_ddata *ddata, |
| int state, unsigned long delay) |
| { |
| int error; |
| |
| /* Update battery state before disconnecting the charger */ |
| switch (state) { |
| case POWER_SUPPLY_STATUS_DISCHARGING: |
| case POWER_SUPPLY_STATUS_FULL: |
| power_supply_changed(ddata->usb); |
| break; |
| default: |
| break; |
| } |
| |
| error = cpcap_charger_disable(ddata); |
| if (error) { |
| cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN); |
| return; |
| } |
| |
| cpcap_charger_update_state(ddata, state); |
| power_supply_changed(ddata->usb); |
| schedule_delayed_work(&ddata->detect_work, delay); |
| } |
| |
| static void cpcap_usb_detect(struct work_struct *work) |
| { |
| struct cpcap_charger_ddata *ddata; |
| struct cpcap_charger_ints_state s; |
| int error, new_state; |
| |
| ddata = container_of(work, struct cpcap_charger_ddata, |
| detect_work.work); |
| |
| error = cpcap_charger_get_ints_state(ddata, &s); |
| if (error) |
| return; |
| |
| /* Just init the state if a charger is connected with no chrg_det set */ |
| if (!s.chrg_det && s.chrgcurr1 && s.vbusvld) { |
| cpcap_charger_update_state(ddata, |
| POWER_SUPPLY_STATUS_NOT_CHARGING); |
| |
| return; |
| } |
| |
| /* |
| * If battery voltage is higher than charge voltage, it may have been |
| * charged to 4.35V by Android. Try again in 10 minutes. |
| */ |
| if (cpcap_charger_get_charge_voltage(ddata) > ddata->voltage) { |
| cpcap_charger_disconnect(ddata, |
| POWER_SUPPLY_STATUS_NOT_CHARGING, |
| HZ * 60 * 10); |
| |
| return; |
| } |
| |
| /* Throttle chrgcurr2 interrupt for charger done and retry */ |
| switch (ddata->status) { |
| case POWER_SUPPLY_STATUS_CHARGING: |
| if (s.chrgcurr2) |
| break; |
| new_state = POWER_SUPPLY_STATUS_FULL; |
| |
| if (s.chrgcurr1 && s.vbusvld) { |
| cpcap_charger_disconnect(ddata, new_state, HZ * 5); |
| return; |
| } |
| break; |
| case POWER_SUPPLY_STATUS_FULL: |
| if (!s.chrgcurr2) |
| break; |
| if (s.vbusvld) |
| new_state = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| else |
| new_state = POWER_SUPPLY_STATUS_DISCHARGING; |
| |
| cpcap_charger_disconnect(ddata, new_state, HZ * 5); |
| |
| return; |
| default: |
| break; |
| } |
| |
| if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) && |
| s.chrgcurr1) { |
| int max_current = 532000; |
| int vchrg, ichrg; |
| |
| if (cpcap_charger_battery_found(ddata)) |
| max_current = 1596000; |
| |
| if (max_current > ddata->limit_current) |
| max_current = ddata->limit_current; |
| |
| ichrg = cpcap_charger_current_to_regval(max_current); |
| vchrg = cpcap_charger_voltage_to_regval(ddata->voltage); |
| error = cpcap_charger_enable(ddata, |
| CPCAP_REG_CRM_VCHRG(vchrg), |
| ichrg, 0); |
| if (error) |
| goto out_err; |
| cpcap_charger_update_state(ddata, |
| POWER_SUPPLY_STATUS_CHARGING); |
| } else { |
| error = cpcap_charger_disable(ddata); |
| if (error) |
| goto out_err; |
| cpcap_charger_update_state(ddata, |
| POWER_SUPPLY_STATUS_DISCHARGING); |
| } |
| |
| power_supply_changed(ddata->usb); |
| return; |
| |
| out_err: |
| cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN); |
| dev_err(ddata->dev, "%s failed with %i\n", __func__, error); |
| } |
| |
| static irqreturn_t cpcap_charger_irq_thread(int irq, void *data) |
| { |
| struct cpcap_charger_ddata *ddata = data; |
| |
| if (!atomic_read(&ddata->active)) |
| return IRQ_NONE; |
| |
| schedule_delayed_work(&ddata->detect_work, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int cpcap_usb_init_irq(struct platform_device *pdev, |
| struct cpcap_charger_ddata *ddata, |
| const char *name) |
| { |
| struct cpcap_interrupt_desc *d; |
| int irq, error; |
| |
| irq = platform_get_irq_byname(pdev, name); |
| if (irq < 0) |
| return -ENODEV; |
| |
| error = devm_request_threaded_irq(ddata->dev, irq, NULL, |
| cpcap_charger_irq_thread, |
| IRQF_SHARED | IRQF_ONESHOT, |
| name, ddata); |
| if (error) { |
| dev_err(ddata->dev, "could not get irq %s: %i\n", |
| name, error); |
| |
| return error; |
| } |
| |
| d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL); |
| if (!d) |
| return -ENOMEM; |
| |
| d->name = name; |
| d->irq = irq; |
| list_add(&d->node, &ddata->irq_list); |
| |
| return 0; |
| } |
| |
| static const char * const cpcap_charger_irqs[] = { |
| /* REG_INT_0 */ |
| "chrg_det", "rvrs_chrg", |
| |
| /* REG_INT1 */ |
| "chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", |
| |
| /* REG_INT_3 */ |
| "battdetb", |
| }; |
| |
| static int cpcap_usb_init_interrupts(struct platform_device *pdev, |
| struct cpcap_charger_ddata *ddata) |
| { |
| int i, error; |
| |
| for (i = 0; i < ARRAY_SIZE(cpcap_charger_irqs); i++) { |
| error = cpcap_usb_init_irq(pdev, ddata, cpcap_charger_irqs[i]); |
| if (error) |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static void cpcap_charger_init_optional_gpios(struct cpcap_charger_ddata *ddata) |
| { |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode", |
| i, GPIOD_OUT_HIGH); |
| if (IS_ERR(ddata->gpio[i])) { |
| dev_info(ddata->dev, "no mode change GPIO%i: %li\n", |
| i, PTR_ERR(ddata->gpio[i])); |
| ddata->gpio[i] = NULL; |
| } |
| } |
| } |
| |
| static int cpcap_charger_init_iio(struct cpcap_charger_ddata *ddata) |
| { |
| const char * const names[CPCAP_CHARGER_IIO_NR] = { |
| "battdetb", "battp", "vbus", "chg_isense", "batti", |
| }; |
| int error, i; |
| |
| for (i = 0; i < CPCAP_CHARGER_IIO_NR; i++) { |
| ddata->channels[i] = devm_iio_channel_get(ddata->dev, |
| names[i]); |
| if (IS_ERR(ddata->channels[i])) { |
| error = PTR_ERR(ddata->channels[i]); |
| goto out_err; |
| } |
| |
| if (!ddata->channels[i]->indio_dev) { |
| error = -ENXIO; |
| goto out_err; |
| } |
| } |
| |
| return 0; |
| |
| out_err: |
| if (error != -EPROBE_DEFER) |
| dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n", |
| error); |
| |
| return error; |
| } |
| |
| static char *cpcap_charger_supplied_to[] = { |
| "battery", |
| }; |
| |
| static const struct power_supply_desc cpcap_charger_usb_desc = { |
| .name = "usb", |
| .type = POWER_SUPPLY_TYPE_USB, |
| .properties = cpcap_charger_props, |
| .num_properties = ARRAY_SIZE(cpcap_charger_props), |
| .get_property = cpcap_charger_get_property, |
| .set_property = cpcap_charger_set_property, |
| .property_is_writeable = cpcap_charger_property_is_writeable, |
| }; |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id cpcap_charger_id_table[] = { |
| { |
| .compatible = "motorola,mapphone-cpcap-charger", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, cpcap_charger_id_table); |
| #endif |
| |
| static int cpcap_charger_probe(struct platform_device *pdev) |
| { |
| struct cpcap_charger_ddata *ddata; |
| const struct of_device_id *of_id; |
| struct power_supply_config psy_cfg = {}; |
| int error; |
| |
| of_id = of_match_device(of_match_ptr(cpcap_charger_id_table), |
| &pdev->dev); |
| if (!of_id) |
| return -EINVAL; |
| |
| ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); |
| if (!ddata) |
| return -ENOMEM; |
| |
| ddata->dev = &pdev->dev; |
| ddata->voltage = 4200000; |
| ddata->limit_current = 532000; |
| |
| ddata->reg = dev_get_regmap(ddata->dev->parent, NULL); |
| if (!ddata->reg) |
| return -ENODEV; |
| |
| INIT_LIST_HEAD(&ddata->irq_list); |
| INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect); |
| INIT_DELAYED_WORK(&ddata->vbus_work, cpcap_charger_vbus_work); |
| platform_set_drvdata(pdev, ddata); |
| |
| error = cpcap_charger_init_iio(ddata); |
| if (error) |
| return error; |
| |
| atomic_set(&ddata->active, 1); |
| |
| psy_cfg.of_node = pdev->dev.of_node; |
| psy_cfg.drv_data = ddata; |
| psy_cfg.supplied_to = cpcap_charger_supplied_to; |
| psy_cfg.num_supplicants = ARRAY_SIZE(cpcap_charger_supplied_to), |
| |
| ddata->usb = devm_power_supply_register(ddata->dev, |
| &cpcap_charger_usb_desc, |
| &psy_cfg); |
| if (IS_ERR(ddata->usb)) { |
| error = PTR_ERR(ddata->usb); |
| dev_err(ddata->dev, "failed to register USB charger: %i\n", |
| error); |
| |
| return error; |
| } |
| |
| error = cpcap_usb_init_interrupts(pdev, ddata); |
| if (error) |
| return error; |
| |
| ddata->comparator.set_vbus = cpcap_charger_set_vbus; |
| error = omap_usb2_set_comparator(&ddata->comparator); |
| if (error == -ENODEV) { |
| dev_info(ddata->dev, "charger needs phy, deferring probe\n"); |
| return -EPROBE_DEFER; |
| } |
| |
| cpcap_charger_init_optional_gpios(ddata); |
| |
| schedule_delayed_work(&ddata->detect_work, 0); |
| |
| return 0; |
| } |
| |
| static void cpcap_charger_shutdown(struct platform_device *pdev) |
| { |
| struct cpcap_charger_ddata *ddata = platform_get_drvdata(pdev); |
| int error; |
| |
| atomic_set(&ddata->active, 0); |
| error = omap_usb2_set_comparator(NULL); |
| if (error) |
| dev_warn(ddata->dev, "could not clear USB comparator: %i\n", |
| error); |
| |
| error = cpcap_charger_disable(ddata); |
| if (error) { |
| cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN); |
| dev_warn(ddata->dev, "could not clear charger: %i\n", |
| error); |
| } |
| cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_DISCHARGING); |
| cancel_delayed_work_sync(&ddata->vbus_work); |
| cancel_delayed_work_sync(&ddata->detect_work); |
| } |
| |
| static int cpcap_charger_remove(struct platform_device *pdev) |
| { |
| cpcap_charger_shutdown(pdev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver cpcap_charger_driver = { |
| .probe = cpcap_charger_probe, |
| .driver = { |
| .name = "cpcap-charger", |
| .of_match_table = of_match_ptr(cpcap_charger_id_table), |
| }, |
| .shutdown = cpcap_charger_shutdown, |
| .remove = cpcap_charger_remove, |
| }; |
| module_platform_driver(cpcap_charger_driver); |
| |
| MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); |
| MODULE_DESCRIPTION("CPCAP Battery Charger Interface driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:cpcap-charger"); |