sound/soc/intel/boards/bdw-rt5650.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * ASoC machine driver for Intel Broadwell platforms with RT5650 codec
  *
  * Copyright 2019, The Chromium OS Authors.  All rights reserved.
  */

 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <sound/core.h>
 #include <sound/jack.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 #include <sound/soc-acpi.h>

 #include "../common/sst-dsp.h"
 #include "../haswell/sst-haswell-ipc.h"

 #include "../../codecs/rt5645.h"

 struct bdw_rt5650_priv {
 	struct gpio_desc *gpio_hp_en;
 	struct snd_soc_component *component;
 };

 static const struct snd_soc_dapm_widget bdw_rt5650_widgets[] = {
 	SND_SOC_DAPM_HP("Headphone", NULL),
 	SND_SOC_DAPM_SPK("Speaker", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
 	SND_SOC_DAPM_MIC("DMIC Pair1", NULL),
 	SND_SOC_DAPM_MIC("DMIC Pair2", NULL),
 };

 static const struct snd_soc_dapm_route bdw_rt5650_map[] = {
 	/* Speakers */
 	{"Speaker", NULL, "SPOL"},
 	{"Speaker", NULL, "SPOR"},

 	/* Headset jack connectors */
 	{"Headphone", NULL, "HPOL"},
 	{"Headphone", NULL, "HPOR"},
 	{"IN1P", NULL, "Headset Mic"},
 	{"IN1N", NULL, "Headset Mic"},

 	/* Digital MICs
 	 * DMIC Pair1 are the two DMICs connected on the DMICN1 connector.
 	 * DMIC Pair2 are the two DMICs connected on the DMICN2 connector.
 	 * Facing the camera, DMIC Pair1 are on the left side, DMIC Pair2
 	 * are on the right side.
 	 */
 	{"DMIC L1", NULL, "DMIC Pair1"},
 	{"DMIC R1", NULL, "DMIC Pair1"},
 	{"DMIC L2", NULL, "DMIC Pair2"},
 	{"DMIC R2", NULL, "DMIC Pair2"},

 	/* CODEC BE connections */
 	{"SSP0 CODEC IN", NULL, "AIF1 Capture"},
 	{"AIF1 Playback", NULL, "SSP0 CODEC OUT"},
 };

 static const struct snd_kcontrol_new bdw_rt5650_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Speaker"),
 	SOC_DAPM_PIN_SWITCH("Headphone"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
 	SOC_DAPM_PIN_SWITCH("DMIC Pair1"),
 	SOC_DAPM_PIN_SWITCH("DMIC Pair2"),
 };


 static struct snd_soc_jack headphone_jack;
 static struct snd_soc_jack mic_jack;

 static struct snd_soc_jack_pin headphone_jack_pin = {
 	.pin	= "Headphone",
 	.mask	= SND_JACK_HEADPHONE,
 };

 static struct snd_soc_jack_pin mic_jack_pin = {
 	.pin	= "Headset Mic",
 	.mask	= SND_JACK_MICROPHONE,
 };

 static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
 			struct snd_pcm_hw_params *params)
 {
 	struct snd_interval *rate = hw_param_interval(params,
 			SNDRV_PCM_HW_PARAM_RATE);
 	struct snd_interval *channels = hw_param_interval(params,
 						SNDRV_PCM_HW_PARAM_CHANNELS);

 	/* The ADSP will covert the FE rate to 48k, max 4-channels */
 	rate->min = rate->max = 48000;
 	channels->min = 2;
 	channels->max = 4;

 	/* set SSP0 to 24 bit */
 	snd_mask_set_format(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT),
 			    SNDRV_PCM_FORMAT_S24_LE);

 	return 0;
 }

 static int bdw_rt5650_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
 	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	int ret;

 	/* Workaround: set codec PLL to 19.2MHz that PLL source is
 	 * from MCLK(24MHz) to conform 2.4MHz DMIC clock.
 	 */
 	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5645_PLL1_S_MCLK,
 		24000000, 19200000);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
 		return ret;
 	}

 	/* The actual MCLK freq is 24MHz. The codec is told that MCLK is
 	 * 24.576MHz to satisfy the requirement of rl6231_get_clk_info.
 	 * ASRC is enabled on AD and DA filters to ensure good audio quality.
 	 */
 	ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_PLL1, 24576000,
 		SND_SOC_CLOCK_IN);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set codec sysclk configuration\n");
 		return ret;
 	}

 	return ret;
 }

 static struct snd_soc_ops bdw_rt5650_ops = {
 	.hw_params = bdw_rt5650_hw_params,
 };

 #if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 static int bdw_rt5650_rtd_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct snd_soc_component *component =
 		snd_soc_rtdcom_lookup(rtd, DRV_NAME);
 	struct sst_pdata *pdata = dev_get_platdata(component->dev);
 	struct sst_hsw *broadwell = pdata->dsp;
 	int ret;

 	/* Set ADSP SSP port settings
 	 * clock_divider = 4 means BCLK = MCLK/5 = 24MHz/5 = 4.8MHz
 	 */
 	ret = sst_hsw_device_set_config(broadwell, SST_HSW_DEVICE_SSP_0,
 		SST_HSW_DEVICE_MCLK_FREQ_24_MHZ,
 		SST_HSW_DEVICE_TDM_CLOCK_MASTER, 4);
 	if (ret < 0) {
 		dev_err(rtd->dev, "error: failed to set device config\n");
 		return ret;
 	}

 	return 0;
 }
 #endif

 static const unsigned int channels[] = {
 	2, 4,
 };

 static const struct snd_pcm_hw_constraint_list constraints_channels = {
 	.count = ARRAY_SIZE(channels),
 	.list = channels,
 	.mask = 0,
 };

 static int bdw_rt5650_fe_startup(struct snd_pcm_substream *substream)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;

 	/* Board supports stereo and quad configurations for capture */
 	if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
 		return 0;

 	runtime->hw.channels_max = 4;
 	return snd_pcm_hw_constraint_list(runtime, 0,
 					  SNDRV_PCM_HW_PARAM_CHANNELS,
 					  &constraints_channels);
 }

 static const struct snd_soc_ops bdw_rt5650_fe_ops = {
 	.startup = bdw_rt5650_fe_startup,
 };

 static int bdw_rt5650_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct bdw_rt5650_priv *bdw_rt5650 =
 		snd_soc_card_get_drvdata(rtd->card);
 	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 	struct snd_soc_component *component = codec_dai->component;
 	int ret;

 	/* Enable codec ASRC function for Stereo DAC/Stereo1 ADC/DMIC/I2S1.
 	 * The ASRC clock source is clk_i2s1_asrc.
 	 */
 	rt5645_sel_asrc_clk_src(component,
 				RT5645_DA_STEREO_FILTER |
 				RT5645_DA_MONO_L_FILTER |
 				RT5645_DA_MONO_R_FILTER |
 				RT5645_AD_STEREO_FILTER |
 				RT5645_AD_MONO_L_FILTER |
 				RT5645_AD_MONO_R_FILTER,
 				RT5645_CLK_SEL_I2S1_ASRC);

 	/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
 	ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24);

 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
 		return ret;
 	}

 	/* Create and initialize headphone jack */
 	if (snd_soc_card_jack_new(rtd->card, "Headphone Jack",
 			SND_JACK_HEADPHONE, &headphone_jack,
 			&headphone_jack_pin, 1)) {
 		dev_err(component->dev, "Can't create headphone jack\n");
 	}

 	/* Create and initialize mic jack */
 	if (snd_soc_card_jack_new(rtd->card, "Mic Jack", SND_JACK_MICROPHONE,
 			&mic_jack, &mic_jack_pin, 1)) {
 		dev_err(component->dev, "Can't create mic jack\n");
 	}

 	rt5645_set_jack_detect(component, &headphone_jack, &mic_jack, NULL);

 	bdw_rt5650->component = component;

 	return 0;
 }

 /* broadwell digital audio interface glue - connects codec <--> CPU */
 SND_SOC_DAILINK_DEF(dummy,
 	DAILINK_COMP_ARRAY(COMP_DUMMY()));

 SND_SOC_DAILINK_DEF(fe,
 	DAILINK_COMP_ARRAY(COMP_CPU("System Pin")));

 SND_SOC_DAILINK_DEF(platform,
 	DAILINK_COMP_ARRAY(COMP_PLATFORM("haswell-pcm-audio")));

 SND_SOC_DAILINK_DEF(be,
 	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5650:00", "rt5645-aif1")));

 #if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 SND_SOC_DAILINK_DEF(ssp0_port,
 	    DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
 #endif

 static struct snd_soc_dai_link bdw_rt5650_dais[] = {
 	/* Front End DAI links */
 	{
 		.name = "System PCM",
 		.stream_name = "System Playback",
 		.dynamic = 1,
 		.ops = &bdw_rt5650_fe_ops,
 #if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 		.init = bdw_rt5650_rtd_init,
 #endif
 		.trigger = {
 			SND_SOC_DPCM_TRIGGER_POST,
 			SND_SOC_DPCM_TRIGGER_POST
 		},
 		.dpcm_playback = 1,
 		.dpcm_capture = 1,
 		SND_SOC_DAILINK_REG(fe, dummy, platform),
 	},

 	/* Back End DAI links */
 	{
 		/* SSP0 - Codec */
 		.name = "Codec",
 		.id = 0,
 		.no_pcm = 1,
 		.dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF |
 			SND_SOC_DAIFMT_CBS_CFS,
 		.ignore_pmdown_time = 1,
 		.be_hw_params_fixup = broadwell_ssp0_fixup,
 		.ops = &bdw_rt5650_ops,
 		.dpcm_playback = 1,
 		.dpcm_capture = 1,
 		.init = bdw_rt5650_init,
 #if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 		SND_SOC_DAILINK_REG(dummy, be, dummy),
 #else
 		SND_SOC_DAILINK_REG(ssp0_port, be, platform),
 #endif
 	},
 };

 #if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 /* use space before codec name to simplify card ID, and simplify driver name */
 #define CARD_NAME "bdw rt5650" /* card name will be 'sof-bdw rt5650' */
 #define DRIVER_NAME "SOF"
 #else
 #define CARD_NAME "bdw-rt5650"
 #define DRIVER_NAME NULL /* card name will be used for driver name */
 #endif

 /* ASoC machine driver for Broadwell DSP + RT5650 */
 static struct snd_soc_card bdw_rt5650_card = {
 	.name = CARD_NAME,
 	.driver_name = DRIVER_NAME,
 	.owner = THIS_MODULE,
 	.dai_link = bdw_rt5650_dais,
 	.num_links = ARRAY_SIZE(bdw_rt5650_dais),
 	.dapm_widgets = bdw_rt5650_widgets,
 	.num_dapm_widgets = ARRAY_SIZE(bdw_rt5650_widgets),
 	.dapm_routes = bdw_rt5650_map,
 	.num_dapm_routes = ARRAY_SIZE(bdw_rt5650_map),
 	.controls = bdw_rt5650_controls,
 	.num_controls = ARRAY_SIZE(bdw_rt5650_controls),
 	.fully_routed = true,
 };

 static int bdw_rt5650_probe(struct platform_device *pdev)
 {
 	struct bdw_rt5650_priv *bdw_rt5650;
 	struct snd_soc_acpi_mach *mach;
 	int ret;

 	bdw_rt5650_card.dev = &pdev->dev;

 	/* Allocate driver private struct */
 	bdw_rt5650 = devm_kzalloc(&pdev->dev, sizeof(struct bdw_rt5650_priv),
 		GFP_KERNEL);
 	if (!bdw_rt5650)
 		return -ENOMEM;

 	/* override plaform name, if required */
 	mach = pdev->dev.platform_data;
 	ret = snd_soc_fixup_dai_links_platform_name(&bdw_rt5650_card,
 						    mach->mach_params.platform);

 	if (ret)
 		return ret;

 	snd_soc_card_set_drvdata(&bdw_rt5650_card, bdw_rt5650);

 	return devm_snd_soc_register_card(&pdev->dev, &bdw_rt5650_card);
 }

 static struct platform_driver bdw_rt5650_audio = {
 	.probe = bdw_rt5650_probe,
 	.driver = {
 		.name = "bdw-rt5650",
 		.pm = &snd_soc_pm_ops,
 	},
 };

 module_platform_driver(bdw_rt5650_audio)

 /* Module information */
 MODULE_AUTHOR("Ben Zhang <benzh@chromium.org>");
 MODULE_DESCRIPTION("Intel Broadwell RT5650 machine driver");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:bdw-rt5650");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* ASoC machine driver for Intel Broadwell platforms with RT5650 codec
	*
	* Copyright 2019, The Chromium OS Authors. All rights reserved.
	*/

	#include <linux/delay.h>
	#include <linux/gpio/consumer.h>
	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <sound/core.h>
	#include <sound/jack.h>
	#include <sound/pcm.h>
	#include <sound/pcm_params.h>
	#include <sound/soc.h>
	#include <sound/soc-acpi.h>

	#include "../common/sst-dsp.h"
	#include "../haswell/sst-haswell-ipc.h"

	#include "../../codecs/rt5645.h"

	struct bdw_rt5650_priv {
	struct gpio_desc *gpio_hp_en;
	struct snd_soc_component *component;
	};

	static const struct snd_soc_dapm_widget bdw_rt5650_widgets[] = {
	SND_SOC_DAPM_HP("Headphone", NULL),
	SND_SOC_DAPM_SPK("Speaker", NULL),
	SND_SOC_DAPM_MIC("Headset Mic", NULL),
	SND_SOC_DAPM_MIC("DMIC Pair1", NULL),
	SND_SOC_DAPM_MIC("DMIC Pair2", NULL),
	};

	static const struct snd_soc_dapm_route bdw_rt5650_map[] = {
	/* Speakers */
	{"Speaker", NULL, "SPOL"},
	{"Speaker", NULL, "SPOR"},

	/* Headset jack connectors */
	{"Headphone", NULL, "HPOL"},
	{"Headphone", NULL, "HPOR"},
	{"IN1P", NULL, "Headset Mic"},
	{"IN1N", NULL, "Headset Mic"},

	/* Digital MICs
	* DMIC Pair1 are the two DMICs connected on the DMICN1 connector.
	* DMIC Pair2 are the two DMICs connected on the DMICN2 connector.
	* Facing the camera, DMIC Pair1 are on the left side, DMIC Pair2
	* are on the right side.
	*/
	{"DMIC L1", NULL, "DMIC Pair1"},
	{"DMIC R1", NULL, "DMIC Pair1"},
	{"DMIC L2", NULL, "DMIC Pair2"},
	{"DMIC R2", NULL, "DMIC Pair2"},

	/* CODEC BE connections */
	{"SSP0 CODEC IN", NULL, "AIF1 Capture"},
	{"AIF1 Playback", NULL, "SSP0 CODEC OUT"},
	};

	static const struct snd_kcontrol_new bdw_rt5650_controls[] = {
	SOC_DAPM_PIN_SWITCH("Speaker"),
	SOC_DAPM_PIN_SWITCH("Headphone"),
	SOC_DAPM_PIN_SWITCH("Headset Mic"),
	SOC_DAPM_PIN_SWITCH("DMIC Pair1"),
	SOC_DAPM_PIN_SWITCH("DMIC Pair2"),
	};


	static struct snd_soc_jack headphone_jack;
	static struct snd_soc_jack mic_jack;

	static struct snd_soc_jack_pin headphone_jack_pin = {
	.pin = "Headphone",
	.mask = SND_JACK_HEADPHONE,
	};

	static struct snd_soc_jack_pin mic_jack_pin = {
	.pin = "Headset Mic",
	.mask = SND_JACK_MICROPHONE,
	};

	static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd,
	struct snd_pcm_hw_params *params)
	{
	struct snd_interval *rate = hw_param_interval(params,
	SNDRV_PCM_HW_PARAM_RATE);
	struct snd_interval *channels = hw_param_interval(params,
	SNDRV_PCM_HW_PARAM_CHANNELS);

	/* The ADSP will covert the FE rate to 48k, max 4-channels */
	rate->min = rate->max = 48000;
	channels->min = 2;
	channels->max = 4;

	/* set SSP0 to 24 bit */
	snd_mask_set_format(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT),
	SNDRV_PCM_FORMAT_S24_LE);

	return 0;
	}

	static int bdw_rt5650_hw_params(struct snd_pcm_substream *substream,
	struct snd_pcm_hw_params *params)
	{
	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
	int ret;

	/* Workaround: set codec PLL to 19.2MHz that PLL source is
	* from MCLK(24MHz) to conform 2.4MHz DMIC clock.
	*/
	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5645_PLL1_S_MCLK,
	24000000, 19200000);
	if (ret < 0) {
	dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
	return ret;
	}

	/* The actual MCLK freq is 24MHz. The codec is told that MCLK is
	* 24.576MHz to satisfy the requirement of rl6231_get_clk_info.
	* ASRC is enabled on AD and DA filters to ensure good audio quality.
	*/
	ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_PLL1, 24576000,
	SND_SOC_CLOCK_IN);
	if (ret < 0) {
	dev_err(rtd->dev, "can't set codec sysclk configuration\n");
	return ret;
	}

	return ret;
	}

	static struct snd_soc_ops bdw_rt5650_ops = {
	.hw_params = bdw_rt5650_hw_params,
	};

	#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
	static int bdw_rt5650_rtd_init(struct snd_soc_pcm_runtime *rtd)
	{
	struct snd_soc_component *component =
	snd_soc_rtdcom_lookup(rtd, DRV_NAME);
	struct sst_pdata *pdata = dev_get_platdata(component->dev);
	struct sst_hsw *broadwell = pdata->dsp;
	int ret;

	/* Set ADSP SSP port settings
	* clock_divider = 4 means BCLK = MCLK/5 = 24MHz/5 = 4.8MHz
	*/
	ret = sst_hsw_device_set_config(broadwell, SST_HSW_DEVICE_SSP_0,
	SST_HSW_DEVICE_MCLK_FREQ_24_MHZ,
	SST_HSW_DEVICE_TDM_CLOCK_MASTER, 4);
	if (ret < 0) {
	dev_err(rtd->dev, "error: failed to set device config\n");
	return ret;
	}

	return 0;
	}
	#endif

	static const unsigned int channels[] = {
	2, 4,
	};

	static const struct snd_pcm_hw_constraint_list constraints_channels = {
	.count = ARRAY_SIZE(channels),
	.list = channels,
	.mask = 0,
	};

	static int bdw_rt5650_fe_startup(struct snd_pcm_substream *substream)
	{
	struct snd_pcm_runtime *runtime = substream->runtime;

	/* Board supports stereo and quad configurations for capture */
	if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
	return 0;

	runtime->hw.channels_max = 4;
	return snd_pcm_hw_constraint_list(runtime, 0,
	SNDRV_PCM_HW_PARAM_CHANNELS,
	&constraints_channels);
	}

	static const struct snd_soc_ops bdw_rt5650_fe_ops = {
	.startup = bdw_rt5650_fe_startup,
	};

	static int bdw_rt5650_init(struct snd_soc_pcm_runtime *rtd)
	{
	struct bdw_rt5650_priv *bdw_rt5650 =
	snd_soc_card_get_drvdata(rtd->card);
	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
	struct snd_soc_component *component = codec_dai->component;
	int ret;

	/* Enable codec ASRC function for Stereo DAC/Stereo1 ADC/DMIC/I2S1.
	* The ASRC clock source is clk_i2s1_asrc.
	*/
	rt5645_sel_asrc_clk_src(component,
	RT5645_DA_STEREO_FILTER \|
	RT5645_DA_MONO_L_FILTER \|
	RT5645_DA_MONO_R_FILTER \|
	RT5645_AD_STEREO_FILTER \|
	RT5645_AD_MONO_L_FILTER \|
	RT5645_AD_MONO_R_FILTER,
	RT5645_CLK_SEL_I2S1_ASRC);

	/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
	ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24);

	if (ret < 0) {
	dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
	return ret;
	}

	/* Create and initialize headphone jack */
	if (snd_soc_card_jack_new(rtd->card, "Headphone Jack",
	SND_JACK_HEADPHONE, &headphone_jack,
	&headphone_jack_pin, 1)) {
	dev_err(component->dev, "Can't create headphone jack\n");
	}

	/* Create and initialize mic jack */
	if (snd_soc_card_jack_new(rtd->card, "Mic Jack", SND_JACK_MICROPHONE,
	&mic_jack, &mic_jack_pin, 1)) {
	dev_err(component->dev, "Can't create mic jack\n");
	}

	rt5645_set_jack_detect(component, &headphone_jack, &mic_jack, NULL);

	bdw_rt5650->component = component;

	return 0;
	}

	/* broadwell digital audio interface glue - connects codec <--> CPU */
	SND_SOC_DAILINK_DEF(dummy,
	DAILINK_COMP_ARRAY(COMP_DUMMY()));

	SND_SOC_DAILINK_DEF(fe,
	DAILINK_COMP_ARRAY(COMP_CPU("System Pin")));

	SND_SOC_DAILINK_DEF(platform,
	DAILINK_COMP_ARRAY(COMP_PLATFORM("haswell-pcm-audio")));

	SND_SOC_DAILINK_DEF(be,
	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5650:00", "rt5645-aif1")));

	#if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
	SND_SOC_DAILINK_DEF(ssp0_port,
	DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
	#endif

	static struct snd_soc_dai_link bdw_rt5650_dais[] = {
	/* Front End DAI links */
	{
	.name = "System PCM",
	.stream_name = "System Playback",
	.dynamic = 1,
	.ops = &bdw_rt5650_fe_ops,
	#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
	.init = bdw_rt5650_rtd_init,
	#endif
	.trigger = {
	SND_SOC_DPCM_TRIGGER_POST,
	SND_SOC_DPCM_TRIGGER_POST
	},
	.dpcm_playback = 1,
	.dpcm_capture = 1,
	SND_SOC_DAILINK_REG(fe, dummy, platform),
	},

	/* Back End DAI links */
	{
	/* SSP0 - Codec */
	.name = "Codec",
	.id = 0,
	.no_pcm = 1,
	.dai_fmt = SND_SOC_DAIFMT_DSP_B \| SND_SOC_DAIFMT_NB_NF \|
	SND_SOC_DAIFMT_CBS_CFS,
	.ignore_pmdown_time = 1,
	.be_hw_params_fixup = broadwell_ssp0_fixup,
	.ops = &bdw_rt5650_ops,
	.dpcm_playback = 1,
	.dpcm_capture = 1,
	.init = bdw_rt5650_init,
	#if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
	SND_SOC_DAILINK_REG(dummy, be, dummy),
	#else
	SND_SOC_DAILINK_REG(ssp0_port, be, platform),
	#endif
	},
	};

	#if IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
	/* use space before codec name to simplify card ID, and simplify driver name */
	#define CARD_NAME "bdw rt5650" /* card name will be 'sof-bdw rt5650' */
	#define DRIVER_NAME "SOF"
	#else
	#define CARD_NAME "bdw-rt5650"
	#define DRIVER_NAME NULL /* card name will be used for driver name */
	#endif

	/* ASoC machine driver for Broadwell DSP + RT5650 */
	static struct snd_soc_card bdw_rt5650_card = {
	.name = CARD_NAME,
	.driver_name = DRIVER_NAME,
	.owner = THIS_MODULE,
	.dai_link = bdw_rt5650_dais,
	.num_links = ARRAY_SIZE(bdw_rt5650_dais),
	.dapm_widgets = bdw_rt5650_widgets,
	.num_dapm_widgets = ARRAY_SIZE(bdw_rt5650_widgets),
	.dapm_routes = bdw_rt5650_map,
	.num_dapm_routes = ARRAY_SIZE(bdw_rt5650_map),
	.controls = bdw_rt5650_controls,
	.num_controls = ARRAY_SIZE(bdw_rt5650_controls),
	.fully_routed = true,
	};

	static int bdw_rt5650_probe(struct platform_device *pdev)
	{
	struct bdw_rt5650_priv *bdw_rt5650;
	struct snd_soc_acpi_mach *mach;
	int ret;

	bdw_rt5650_card.dev = &pdev->dev;

	/* Allocate driver private struct */
	bdw_rt5650 = devm_kzalloc(&pdev->dev, sizeof(struct bdw_rt5650_priv),
	GFP_KERNEL);
	if (!bdw_rt5650)
	return -ENOMEM;

	/* override plaform name, if required */
	mach = pdev->dev.platform_data;
	ret = snd_soc_fixup_dai_links_platform_name(&bdw_rt5650_card,
	mach->mach_params.platform);

	if (ret)
	return ret;

	snd_soc_card_set_drvdata(&bdw_rt5650_card, bdw_rt5650);

	return devm_snd_soc_register_card(&pdev->dev, &bdw_rt5650_card);
	}

	static struct platform_driver bdw_rt5650_audio = {
	.probe = bdw_rt5650_probe,
	.driver = {
	.name = "bdw-rt5650",
	.pm = &snd_soc_pm_ops,
	},
	};

	module_platform_driver(bdw_rt5650_audio)

	/* Module information */
	MODULE_AUTHOR("Ben Zhang <benzh@chromium.org>");
	MODULE_DESCRIPTION("Intel Broadwell RT5650 machine driver");
	MODULE_LICENSE("GPL v2");
	MODULE_ALIAS("platform:bdw-rt5650");