| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Based on the same principle as kgdboe using the NETPOLL api, this |
| * driver uses a console polling api to implement a gdb serial inteface |
| * which is multiplexed on a console port. |
| * |
| * Maintainer: Jason Wessel <jason.wessel@windriver.com> |
| * |
| * 2007-2008 (c) Jason Wessel - Wind River Systems, Inc. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/ctype.h> |
| #include <linux/kgdb.h> |
| #include <linux/kdb.h> |
| #include <linux/tty.h> |
| #include <linux/console.h> |
| #include <linux/vt_kern.h> |
| #include <linux/input.h> |
| #include <linux/module.h> |
| |
| #define MAX_CONFIG_LEN 40 |
| |
| static struct kgdb_io kgdboc_io_ops; |
| |
| /* -1 = init not run yet, 0 = unconfigured, 1 = configured. */ |
| static int configured = -1; |
| |
| static char config[MAX_CONFIG_LEN]; |
| static struct kparam_string kps = { |
| .string = config, |
| .maxlen = MAX_CONFIG_LEN, |
| }; |
| |
| static int kgdboc_use_kms; /* 1 if we use kernel mode switching */ |
| static struct tty_driver *kgdb_tty_driver; |
| static int kgdb_tty_line; |
| |
| #ifdef CONFIG_KDB_KEYBOARD |
| static int kgdboc_reset_connect(struct input_handler *handler, |
| struct input_dev *dev, |
| const struct input_device_id *id) |
| { |
| input_reset_device(dev); |
| |
| /* Return an error - we do not want to bind, just to reset */ |
| return -ENODEV; |
| } |
| |
| static void kgdboc_reset_disconnect(struct input_handle *handle) |
| { |
| /* We do not expect anyone to actually bind to us */ |
| BUG(); |
| } |
| |
| static const struct input_device_id kgdboc_reset_ids[] = { |
| { |
| .flags = INPUT_DEVICE_ID_MATCH_EVBIT, |
| .evbit = { BIT_MASK(EV_KEY) }, |
| }, |
| { } |
| }; |
| |
| static struct input_handler kgdboc_reset_handler = { |
| .connect = kgdboc_reset_connect, |
| .disconnect = kgdboc_reset_disconnect, |
| .name = "kgdboc_reset", |
| .id_table = kgdboc_reset_ids, |
| }; |
| |
| static DEFINE_MUTEX(kgdboc_reset_mutex); |
| |
| static void kgdboc_restore_input_helper(struct work_struct *dummy) |
| { |
| /* |
| * We need to take a mutex to prevent several instances of |
| * this work running on different CPUs so they don't try |
| * to register again already registered handler. |
| */ |
| mutex_lock(&kgdboc_reset_mutex); |
| |
| if (input_register_handler(&kgdboc_reset_handler) == 0) |
| input_unregister_handler(&kgdboc_reset_handler); |
| |
| mutex_unlock(&kgdboc_reset_mutex); |
| } |
| |
| static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper); |
| |
| static void kgdboc_restore_input(void) |
| { |
| if (likely(system_state == SYSTEM_RUNNING)) |
| schedule_work(&kgdboc_restore_input_work); |
| } |
| |
| static int kgdboc_register_kbd(char **cptr) |
| { |
| if (strncmp(*cptr, "kbd", 3) == 0 || |
| strncmp(*cptr, "kdb", 3) == 0) { |
| if (kdb_poll_idx < KDB_POLL_FUNC_MAX) { |
| kdb_poll_funcs[kdb_poll_idx] = kdb_get_kbd_char; |
| kdb_poll_idx++; |
| if (cptr[0][3] == ',') |
| *cptr += 4; |
| else |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static void kgdboc_unregister_kbd(void) |
| { |
| int i; |
| |
| for (i = 0; i < kdb_poll_idx; i++) { |
| if (kdb_poll_funcs[i] == kdb_get_kbd_char) { |
| kdb_poll_idx--; |
| kdb_poll_funcs[i] = kdb_poll_funcs[kdb_poll_idx]; |
| kdb_poll_funcs[kdb_poll_idx] = NULL; |
| i--; |
| } |
| } |
| flush_work(&kgdboc_restore_input_work); |
| } |
| #else /* ! CONFIG_KDB_KEYBOARD */ |
| #define kgdboc_register_kbd(x) 0 |
| #define kgdboc_unregister_kbd() |
| #define kgdboc_restore_input() |
| #endif /* ! CONFIG_KDB_KEYBOARD */ |
| |
| static void cleanup_kgdboc(void) |
| { |
| if (kgdb_unregister_nmi_console()) |
| return; |
| kgdboc_unregister_kbd(); |
| if (configured == 1) |
| kgdb_unregister_io_module(&kgdboc_io_ops); |
| } |
| |
| static int configure_kgdboc(void) |
| { |
| struct tty_driver *p; |
| int tty_line = 0; |
| int err = -ENODEV; |
| char *cptr = config; |
| struct console *cons; |
| |
| if (!strlen(config) || isspace(config[0])) { |
| err = 0; |
| goto noconfig; |
| } |
| |
| kgdboc_io_ops.is_console = 0; |
| kgdb_tty_driver = NULL; |
| |
| kgdboc_use_kms = 0; |
| if (strncmp(cptr, "kms,", 4) == 0) { |
| cptr += 4; |
| kgdboc_use_kms = 1; |
| } |
| |
| if (kgdboc_register_kbd(&cptr)) |
| goto do_register; |
| |
| p = tty_find_polling_driver(cptr, &tty_line); |
| if (!p) |
| goto noconfig; |
| |
| cons = console_drivers; |
| while (cons) { |
| int idx; |
| if (cons->device && cons->device(cons, &idx) == p && |
| idx == tty_line) { |
| kgdboc_io_ops.is_console = 1; |
| break; |
| } |
| cons = cons->next; |
| } |
| |
| kgdb_tty_driver = p; |
| kgdb_tty_line = tty_line; |
| |
| do_register: |
| err = kgdb_register_io_module(&kgdboc_io_ops); |
| if (err) |
| goto noconfig; |
| |
| err = kgdb_register_nmi_console(); |
| if (err) |
| goto nmi_con_failed; |
| |
| configured = 1; |
| |
| return 0; |
| |
| nmi_con_failed: |
| kgdb_unregister_io_module(&kgdboc_io_ops); |
| noconfig: |
| kgdboc_unregister_kbd(); |
| config[0] = 0; |
| configured = 0; |
| cleanup_kgdboc(); |
| |
| return err; |
| } |
| |
| static int __init init_kgdboc(void) |
| { |
| /* Already configured? */ |
| if (configured == 1) |
| return 0; |
| |
| return configure_kgdboc(); |
| } |
| |
| static int kgdboc_get_char(void) |
| { |
| if (!kgdb_tty_driver) |
| return -1; |
| return kgdb_tty_driver->ops->poll_get_char(kgdb_tty_driver, |
| kgdb_tty_line); |
| } |
| |
| static void kgdboc_put_char(u8 chr) |
| { |
| if (!kgdb_tty_driver) |
| return; |
| kgdb_tty_driver->ops->poll_put_char(kgdb_tty_driver, |
| kgdb_tty_line, chr); |
| } |
| |
| static int param_set_kgdboc_var(const char *kmessage, |
| const struct kernel_param *kp) |
| { |
| size_t len = strlen(kmessage); |
| |
| if (len >= MAX_CONFIG_LEN) { |
| pr_err("config string too long\n"); |
| return -ENOSPC; |
| } |
| |
| /* Only copy in the string if the init function has not run yet */ |
| if (configured < 0) { |
| strcpy(config, kmessage); |
| return 0; |
| } |
| |
| if (kgdb_connected) { |
| pr_err("Cannot reconfigure while KGDB is connected.\n"); |
| |
| return -EBUSY; |
| } |
| |
| strcpy(config, kmessage); |
| /* Chop out \n char as a result of echo */ |
| if (len && config[len - 1] == '\n') |
| config[len - 1] = '\0'; |
| |
| if (configured == 1) |
| cleanup_kgdboc(); |
| |
| /* Go and configure with the new params. */ |
| return configure_kgdboc(); |
| } |
| |
| static int dbg_restore_graphics; |
| |
| static void kgdboc_pre_exp_handler(void) |
| { |
| if (!dbg_restore_graphics && kgdboc_use_kms) { |
| dbg_restore_graphics = 1; |
| con_debug_enter(vc_cons[fg_console].d); |
| } |
| /* Increment the module count when the debugger is active */ |
| if (!kgdb_connected) |
| try_module_get(THIS_MODULE); |
| |
| atomic_inc(&ignore_console_lock_warning); |
| } |
| |
| static void kgdboc_post_exp_handler(void) |
| { |
| atomic_dec(&ignore_console_lock_warning); |
| |
| /* decrement the module count when the debugger detaches */ |
| if (!kgdb_connected) |
| module_put(THIS_MODULE); |
| if (kgdboc_use_kms && dbg_restore_graphics) { |
| dbg_restore_graphics = 0; |
| con_debug_leave(); |
| } |
| kgdboc_restore_input(); |
| } |
| |
| static struct kgdb_io kgdboc_io_ops = { |
| .name = "kgdboc", |
| .read_char = kgdboc_get_char, |
| .write_char = kgdboc_put_char, |
| .pre_exception = kgdboc_pre_exp_handler, |
| .post_exception = kgdboc_post_exp_handler, |
| }; |
| |
| #ifdef CONFIG_KGDB_SERIAL_CONSOLE |
| static int kgdboc_option_setup(char *opt) |
| { |
| if (!opt) { |
| pr_err("config string not provided\n"); |
| return -EINVAL; |
| } |
| |
| if (strlen(opt) >= MAX_CONFIG_LEN) { |
| pr_err("config string too long\n"); |
| return -ENOSPC; |
| } |
| strcpy(config, opt); |
| |
| return 0; |
| } |
| |
| __setup("kgdboc=", kgdboc_option_setup); |
| |
| |
| /* This is only available if kgdboc is a built in for early debugging */ |
| static int __init kgdboc_early_init(char *opt) |
| { |
| /* save the first character of the config string because the |
| * init routine can destroy it. |
| */ |
| char save_ch; |
| |
| kgdboc_option_setup(opt); |
| save_ch = config[0]; |
| init_kgdboc(); |
| config[0] = save_ch; |
| return 0; |
| } |
| |
| early_param("ekgdboc", kgdboc_early_init); |
| #endif /* CONFIG_KGDB_SERIAL_CONSOLE */ |
| |
| module_init(init_kgdboc); |
| module_exit(cleanup_kgdboc); |
| module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644); |
| MODULE_PARM_DESC(kgdboc, "<serial_device>[,baud]"); |
| MODULE_DESCRIPTION("KGDB Console TTY Driver"); |
| MODULE_LICENSE("GPL"); |