| /* |
| * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/leds.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/sizes.h> |
| |
| #include <loongson1.h> |
| #include <dma.h> |
| #include <nand.h> |
| #include <platform.h> |
| |
| struct plat_ls1x_dma ls1x_dma_pdata = { |
| .nr_channels = 3, |
| }; |
| |
| static struct mtd_partition ls1x_nand_parts[] = { |
| { |
| .name = "kernel", |
| .offset = 0, |
| .size = SZ_16M, |
| }, |
| { |
| .name = "rootfs", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| struct plat_ls1x_nand ls1x_nand_pdata = { |
| .parts = ls1x_nand_parts, |
| .nr_parts = ARRAY_SIZE(ls1x_nand_parts), |
| .hold_cycle = 0x2, |
| .wait_cycle = 0xc, |
| }; |
| |
| static const struct gpio_led ls1x_gpio_leds[] __initconst = { |
| { |
| .name = "LED9", |
| .default_trigger = "heartbeat", |
| .gpio = 38, |
| .active_low = 1, |
| .default_state = LEDS_GPIO_DEFSTATE_OFF, |
| }, { |
| .name = "LED6", |
| .default_trigger = "nand-disk", |
| .gpio = 39, |
| .active_low = 1, |
| .default_state = LEDS_GPIO_DEFSTATE_OFF, |
| }, |
| }; |
| |
| static const struct gpio_led_platform_data ls1x_led_pdata __initconst = { |
| .num_leds = ARRAY_SIZE(ls1x_gpio_leds), |
| .leds = ls1x_gpio_leds, |
| }; |
| |
| static struct platform_device *ls1b_platform_devices[] __initdata = { |
| &ls1x_uart_pdev, |
| &ls1x_cpufreq_pdev, |
| &ls1x_dma_pdev, |
| &ls1x_eth0_pdev, |
| &ls1x_eth1_pdev, |
| &ls1x_ehci_pdev, |
| &ls1x_gpio0_pdev, |
| &ls1x_gpio1_pdev, |
| &ls1x_nand_pdev, |
| &ls1x_rtc_pdev, |
| }; |
| |
| static int __init ls1b_platform_init(void) |
| { |
| ls1x_serial_set_uartclk(&ls1x_uart_pdev); |
| ls1x_dma_set_platdata(&ls1x_dma_pdata); |
| ls1x_nand_set_platdata(&ls1x_nand_pdata); |
| |
| gpio_led_register_device(-1, &ls1x_led_pdata); |
| |
| return platform_add_devices(ls1b_platform_devices, |
| ARRAY_SIZE(ls1b_platform_devices)); |
| } |
| |
| arch_initcall(ls1b_platform_init); |