| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2014 Marvell |
| * Author: Gregory CLEMENT <gregory.clement@free-electrons.com> |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/mbus.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/phy/phy.h> |
| |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| |
| #include "xhci-mvebu.h" |
| #include "xhci.h" |
| |
| #define USB3_MAX_WINDOWS 4 |
| #define USB3_WIN_CTRL(w) (0x0 + ((w) * 8)) |
| #define USB3_WIN_BASE(w) (0x4 + ((w) * 8)) |
| |
| static void xhci_mvebu_mbus_config(void __iomem *base, |
| const struct mbus_dram_target_info *dram) |
| { |
| int win; |
| |
| /* Clear all existing windows */ |
| for (win = 0; win < USB3_MAX_WINDOWS; win++) { |
| writel(0, base + USB3_WIN_CTRL(win)); |
| writel(0, base + USB3_WIN_BASE(win)); |
| } |
| |
| /* Program each DRAM CS in a seperate window */ |
| for (win = 0; win < dram->num_cs; win++) { |
| const struct mbus_dram_window *cs = dram->cs + win; |
| |
| writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | |
| (dram->mbus_dram_target_id << 4) | 1, |
| base + USB3_WIN_CTRL(win)); |
| |
| writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(win)); |
| } |
| } |
| |
| int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) |
| { |
| struct device *dev = hcd->self.controller; |
| struct platform_device *pdev = to_platform_device(dev); |
| struct resource *res; |
| void __iomem *base; |
| const struct mbus_dram_target_info *dram; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!res) |
| return -ENODEV; |
| |
| /* |
| * We don't use devm_ioremap() because this mapping should |
| * only exists for the duration of this probe function. |
| */ |
| base = ioremap(res->start, resource_size(res)); |
| if (!base) |
| return -ENODEV; |
| |
| dram = mv_mbus_dram_info(); |
| xhci_mvebu_mbus_config(base, dram); |
| |
| /* |
| * This memory area was only needed to configure the MBus |
| * windows, and is therefore no longer useful. |
| */ |
| iounmap(base); |
| |
| return 0; |
| } |
| |
| int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| struct device *dev = hcd->self.controller; |
| struct phy *phy; |
| int ret; |
| |
| /* Old bindings miss the PHY handle */ |
| phy = of_phy_get(dev->of_node, "usb3-phy"); |
| if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| else if (IS_ERR(phy)) |
| goto phy_out; |
| |
| ret = phy_init(phy); |
| if (ret) |
| goto phy_put; |
| |
| ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS); |
| if (ret) |
| goto phy_exit; |
| |
| ret = phy_power_on(phy); |
| if (ret == -EOPNOTSUPP) { |
| /* Skip initializatin of XHCI PHY when it is unsupported by firmware */ |
| dev_warn(dev, "PHY unsupported by firmware\n"); |
| xhci->quirks |= XHCI_SKIP_PHY_INIT; |
| } |
| if (ret) |
| goto phy_exit; |
| |
| phy_power_off(phy); |
| phy_exit: |
| phy_exit(phy); |
| phy_put: |
| of_phy_put(phy); |
| phy_out: |
| |
| return 0; |
| } |
| |
| int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) |
| { |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| |
| /* Without reset on resume, the HC won't work at all */ |
| xhci->quirks |= XHCI_RESET_ON_RESUME; |
| |
| return 0; |
| } |