| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/gpio/mediatek,mt7621-gpio.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Mediatek MT7621 SoC GPIO controller |
| |
| maintainers: |
| - Sergio Paracuellos <sergio.paracuellos@gmail.com> |
| |
| description: | |
| The IP core used inside these SoCs has 3 banks of 32 GPIOs each. |
| The registers of all the banks are interwoven inside one single IO range. |
| We load one GPIO controller instance per bank. Also the GPIO controller can receive |
| interrupts on any of the GPIOs, either edge or level. It then interrupts the CPU |
| using GIC INT12. |
| |
| properties: |
| $nodename: |
| pattern: "^gpio@[0-9a-f]+$" |
| |
| compatible: |
| const: mediatek,mt7621-gpio |
| |
| reg: |
| maxItems: 1 |
| |
| "#gpio-cells": |
| const: 2 |
| |
| gpio-controller: true |
| gpio-ranges: true |
| |
| interrupt-controller: true |
| |
| "#interrupt-cells": |
| const: 2 |
| |
| interrupts: |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - reg |
| - "#gpio-cells" |
| - gpio-controller |
| - gpio-ranges |
| - interrupt-controller |
| - "#interrupt-cells" |
| - interrupts |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/mips-gic.h> |
| |
| gpio@600 { |
| compatible = "mediatek,mt7621-gpio"; |
| reg = <0x600 0x100>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| gpio-ranges = <&pinctrl 0 0 95>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| ... |