| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Common PHY and network PCS transmit amplitude property |
| |
| description: |
| Binding describing the peak-to-peak transmit amplitude for common PHYs |
| and network PCSes. |
| |
| maintainers: |
| - Marek Behún <kabel@kernel.org> |
| |
| properties: |
| tx-p2p-microvolt: |
| description: |
| Transmit amplitude voltages in microvolts, peak-to-peak. If this property |
| contains multiple values for various PHY modes, the |
| 'tx-p2p-microvolt-names' property must be provided and contain |
| corresponding mode names. |
| |
| tx-p2p-microvolt-names: |
| description: | |
| Names of the modes corresponding to voltages in the 'tx-p2p-microvolt' |
| property. Required only if multiple voltages are provided. |
| |
| If a value of 'default' is provided, the system should use it for any PHY |
| mode that is otherwise not defined here. If 'default' is not provided, the |
| system should use manufacturer default value. |
| minItems: 1 |
| maxItems: 16 |
| items: |
| enum: |
| - default |
| |
| # ethernet modes |
| - sgmii |
| - qsgmii |
| - xgmii |
| - 1000base-x |
| - 2500base-x |
| - 5gbase-r |
| - rxaui |
| - xaui |
| - 10gbase-kr |
| - usxgmii |
| - 10gbase-r |
| - 25gbase-r |
| |
| # PCIe modes |
| - pcie |
| - pcie1 |
| - pcie2 |
| - pcie3 |
| - pcie4 |
| - pcie5 |
| - pcie6 |
| |
| # USB modes |
| - usb |
| - usb-ls |
| - usb-fs |
| - usb-hs |
| - usb-ss |
| - usb-ss+ |
| - usb-4 |
| |
| # storage modes |
| - sata |
| - ufs-hs |
| - ufs-hs-a |
| - ufs-hs-b |
| |
| # display modes |
| - lvds |
| - dp |
| - dp-rbr |
| - dp-hbr |
| - dp-hbr2 |
| - dp-hbr3 |
| - dp-uhbr-10 |
| - dp-uhbr-13.5 |
| - dp-uhbr-20 |
| |
| # camera modes |
| - mipi-dphy |
| - mipi-dphy-univ |
| - mipi-dphy-v2.5-univ |
| |
| dependencies: |
| tx-p2p-microvolt-names: [ tx-p2p-microvolt ] |
| |
| additionalProperties: true |
| |
| examples: |
| - | |
| phy: phy { |
| #phy-cells = <1>; |
| tx-p2p-microvolt = <915000>, <1100000>, <1200000>; |
| tx-p2p-microvolt-names = "2500base-x", "usb-hs", "usb-ss"; |
| }; |
